public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Carsey, Jaben" <jaben.carsey@intel.com>
To: "Ni, Ruiyu" <ruiyu.ni@intel.com>,
	"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>,
	"Shah, Tapan (tapandshah@hpe.com)" <tapandshah@hpe.com>
Subject: Re: [PATCH] ShellPkg/alias: Fix bug to support upper-case alias
Date: Fri, 2 Jun 2017 15:04:00 +0000	[thread overview]
Message-ID: <CB6E33457884FA40993F35157061515C6CAA5B80@FMSMSX103.amr.corp.intel.com> (raw)
In-Reply-To: <734D49CCEBEEF84792F5B80ED585239D5B982AEF@SHSMSX104.ccr.corp.intel.com>

Ok.  I see now. Thanks!

Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>

> -----Original Message-----
> From: Ni, Ruiyu
> Sent: Thursday, June 01, 2017 7:32 PM
> To: Carsey, Jaben <jaben.carsey@intel.com>; edk2-devel@lists.01.org
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Shah, Tapan
> (tapandshah@hpe.com) <tapandshah@hpe.com>
> Subject: RE: [PATCH] ShellPkg/alias: Fix bug to support upper-case alias
> Importance: High
> 
> Jaben,
> Old code also honors the returning status when delete an alias.
> Please check the line I marked as "<----------" in below.
> 
>   //
>   // We must be trying to remove one if Alias is NULL
>   //
>   if (Alias == NULL) {
>     //
>     // remove an alias (but passed in COMMAND parameter)
>     //
>     Status = (gRT->SetVariable((CHAR16*)Command, &gShellAliasGuid, 0, 0,
> NULL)); // <------------------
>   } else {
>     //
>     // Add and replace are the same
>     //
> 
>     // We dont check the error return on purpose since the variable may not
> exist.
>     gRT->SetVariable((CHAR16*)Command, &gShellAliasGuid, 0, 0, NULL);
> 
>     Status = (gRT->SetVariable((CHAR16*)Alias, &gShellAliasGuid,
> EFI_VARIABLE_BOOTSERVICE_ACCESS|(Volatile?0:EFI_VARIABLE_NON_VOL
> ATILE), StrSize(Command), (VOID*)Command));
>   }
> 
> Regards,
> Ray
> 
> >-----Original Message-----
> >From: Carsey, Jaben
> >Sent: Thursday, June 1, 2017 11:42 PM
> >To: Ni, Ruiyu <ruiyu.ni@intel.com>; edk2-devel@lists.01.org
> >Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Shah, Tapan
> (tapandshah@hpe.com) <tapandshah@hpe.com>
> >Subject: RE: [PATCH] ShellPkg/alias: Fix bug to support upper-case alias
> >
> >I think we have to leave the behavior the same.  The spec says this: " If the
> environment variable does not exist and the
> >Value is an empty string, there is no action."
> >
> >I do not think we can change that to an error return without a spec change.
> >
> >-Jaben
> >
> >> -----Original Message-----
> >> From: Carsey, Jaben
> >> Sent: Thursday, June 01, 2017 8:40 AM
> >> To: Ni, Ruiyu <ruiyu.ni@intel.com>; edk2-devel@lists.01.org
> >> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Shah, Tapan
> >> (tapandshah@hpe.com) <tapandshah@hpe.com>
> >> Subject: RE: [PATCH] ShellPkg/alias: Fix bug to support upper-case alias
> >>
> >> I just think we may want to have the behavior act the same as it does
> today
> >> for delete.
> >>
> >> > -----Original Message-----
> >> > From: Ni, Ruiyu
> >> > Sent: Thursday, June 01, 2017 8:19 AM
> >> > To: Carsey, Jaben <jaben.carsey@intel.com>; edk2-devel@lists.01.org
> >> > Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Shah, Tapan
> >> > (tapandshah@hpe.com) <tapandshah@hpe.com>
> >> > Subject: RE: [PATCH] ShellPkg/alias: Fix bug to support upper-case alias
> >> > Importance: High
> >> >
> >> > I was using AliasLower.
> >> > I am not sure whether the change is smallest. But I tried best to make
> the
> >> > new implementation cleaner. I think that's what we really need.
> >> >
> >> > Did you see any issue if we return EFI_NOT_FOUND (when variable
> doesn't
> >> > exist)?
> >> >
> >> > Regards,
> >> > Ray
> >> >
> >> > >-----Original Message-----
> >> > >From: Carsey, Jaben
> >> > >Sent: Thursday, June 1, 2017 11:02 PM
> >> > >To: Ni, Ruiyu <ruiyu.ni@intel.com>; edk2-devel@lists.01.org
> >> > >Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Shah, Tapan
> >> > (tapandshah@hpe.com) <tapandshah@hpe.com>
> >> > >Subject: RE: [PATCH] ShellPkg/alias: Fix bug to support upper-case alias
> >> > >
> >> > >Why not just use the AliasLower and make the overall change much
> >> > smaller?  Looks like the old version did the conversion,
> >> > >but didn't use the result.
> >> > >
> >> > >Also, I notice that we are now checking the return value upon delete,
> >> which
> >> > was explicitly not done in the old version.
> >> > >There was this comment before: "We dont check the error return on
> >> > purpose since the variable may not exist."
> >> > >
> >> > >-Jaben
> >> > >
> >> > >
> >> > >> -----Original Message-----
> >> > >> From: Ni, Ruiyu
> >> > >> Sent: Thursday, June 01, 2017 7:12 AM
> >> > >> To: edk2-devel@lists.01.org
> >> > >> Cc: Carsey, Jaben <jaben.carsey@intel.com>; Kinney, Michael D
> >> > >> <michael.d.kinney@intel.com>
> >> > >> Subject: [PATCH] ShellPkg/alias: Fix bug to support upper-case alias
> >> > >> Importance: High
> >> > >>
> >> > >> alias in UEFI Shell is case insensitive.
> >> > >> Old code saves the alias to variable storage without
> >> > >> converting the alias to lower-case, which results
> >> > >> upper case alias setting doesn't work.
> >> > >> The patch converts the alias to lower case before saving
> >> > >> to variable storage.
> >> > >>
> >> > >> Contributed-under: TianoCore Contribution Agreement 1.0
> >> > >> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
> >> > >> Cc: Jaben Carsey <jaben.carsey@intel.com>
> >> > >> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> >> > >> ---
> >> > >>  ShellPkg/Application/Shell/ShellProtocol.c | 50 +++++++++++++++--
> ----
> >> --
> >> > ----
> >> > >> ---
> >> > >>  1 file changed, 25 insertions(+), 25 deletions(-)
> >> > >>
> >> > >> diff --git a/ShellPkg/Application/Shell/ShellProtocol.c
> >> > >> b/ShellPkg/Application/Shell/ShellProtocol.c
> >> > >> index 347e162e62..b3b8acc0d0 100644
> >> > >> --- a/ShellPkg/Application/Shell/ShellProtocol.c
> >> > >> +++ b/ShellPkg/Application/Shell/ShellProtocol.c
> >> > >> @@ -3463,40 +3463,40 @@ InternalSetAlias(
> >> > >>  {
> >> > >>    EFI_STATUS  Status;
> >> > >>    CHAR16      *AliasLower;
> >> > >> +  BOOLEAN     DeleteAlias;
> >> > >>
> >> > >> -  // Convert to lowercase to make aliases case-insensitive
> >> > >> -  if (Alias != NULL) {
> >> > >> -    AliasLower = AllocateCopyPool (StrSize (Alias), Alias);
> >> > >> -    if (AliasLower == NULL) {
> >> > >> -      return EFI_OUT_OF_RESOURCES;
> >> > >> -    }
> >> > >> -    ToLower (AliasLower);
> >> > >> -  } else {
> >> > >> -    AliasLower = NULL;
> >> > >> -  }
> >> > >> -
> >> > >> -  //
> >> > >> -  // We must be trying to remove one if Alias is NULL
> >> > >> -  //
> >> > >> +  DeleteAlias = FALSE;
> >> > >>    if (Alias == NULL) {
> >> > >>      //
> >> > >> +    // We must be trying to remove one if Alias is NULL
> >> > >>      // remove an alias (but passed in COMMAND parameter)
> >> > >>      //
> >> > >> -    Status = (gRT->SetVariable((CHAR16*)Command,
> &gShellAliasGuid,
> >> 0,
> >> > 0,
> >> > >> NULL));
> >> > >> -  } else {
> >> > >> -    //
> >> > >> -    // Add and replace are the same
> >> > >> -    //
> >> > >> -
> >> > >> -    // We dont check the error return on purpose since the variable
> may
> >> > not
> >> > >> exist.
> >> > >> -    gRT->SetVariable((CHAR16*)Command, &gShellAliasGuid, 0, 0,
> >> NULL);
> >> > >> +    Alias       = Command;
> >> > >> +    DeleteAlias = TRUE;
> >> > >> +  }
> >> > >> +  ASSERT (Alias != NULL);
> >> > >>
> >> > >> -    Status = (gRT->SetVariable((CHAR16*)Alias, &gShellAliasGuid,
> >> > >>
> >> >
> >>
> EFI_VARIABLE_BOOTSERVICE_ACCESS|(Volatile?0:EFI_VARIABLE_NON_VOL
> >> > >> ATILE), StrSize(Command), (VOID*)Command));
> >> > >> +  //
> >> > >> +  // Convert to lowercase to make aliases case-insensitive
> >> > >> +  //
> >> > >> +  AliasLower = AllocateCopyPool (StrSize (Alias), Alias);
> >> > >> +  if (AliasLower == NULL) {
> >> > >> +    return EFI_OUT_OF_RESOURCES;
> >> > >>    }
> >> > >> +  ToLower (AliasLower);
> >> > >>
> >> > >> -  if (Alias != NULL) {
> >> > >> -    FreePool (AliasLower);
> >> > >> +  if (DeleteAlias) {
> >> > >> +    Status = gRT->SetVariable (AliasLower, &gShellAliasGuid, 0, 0,
> NULL);
> >> > >> +  } else {
> >> > >> +    Status = gRT->SetVariable (
> >> > >> +                    AliasLower, &gShellAliasGuid,
> >> > >> +                    EFI_VARIABLE_BOOTSERVICE_ACCESS | (Volatile ? 0 :
> >> > >> EFI_VARIABLE_NON_VOLATILE),
> >> > >> +                    StrSize (Command), (VOID *) Command
> >> > >> +                    );
> >> > >>    }
> >> > >> +
> >> > >> +  FreePool (AliasLower);
> >> > >> +
> >> > >>    return Status;
> >> > >>  }
> >> > >>
> >> > >> --
> >> > >> 2.12.2.windows.2



  reply	other threads:[~2017-06-02 15:02 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-01 14:11 [PATCH] ShellPkg/alias: Fix bug to support upper-case alias Ruiyu Ni
2017-06-01 14:14 ` Ni, Ruiyu
2017-06-01 15:01 ` Carsey, Jaben
2017-06-01 15:18   ` Ni, Ruiyu
2017-06-01 15:39     ` Carsey, Jaben
2017-06-01 15:42     ` Carsey, Jaben
2017-06-02  2:31       ` Ni, Ruiyu
2017-06-02 15:04         ` Carsey, Jaben [this message]
2017-06-02 16:12           ` Shah, Tapan
2017-06-04  0:47             ` Ni, Ruiyu
2017-06-05 15:25               ` Shah, Tapan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CB6E33457884FA40993F35157061515C6CAA5B80@FMSMSX103.amr.corp.intel.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox