From: "Carsey, Jaben" <jaben.carsey@intel.com>
To: "Zhu, Yonghong" <yonghong.zhu@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Gao, Liming" <liming.gao@intel.com>
Subject: Re: [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*'
Date: Fri, 7 Dec 2018 00:50:23 +0000 [thread overview]
Message-ID: <CB6E33457884FA40993F35157061515CB122C15F@ORSMSX153.amr.corp.intel.com> (raw)
In-Reply-To: <B9726D6DCCFB8B4CA276A9169B02216D521846B4@SHSMSX103.ccr.corp.intel.com>
How about undo those and push the remaining? Since that's a very small change.
-Jaben
> -----Original Message-----
> From: Zhu, Yonghong
> Sent: Monday, December 3, 2018 5:53 PM
> To: Carsey, Jaben <jaben.carsey@intel.com>; edk2-devel@lists.01.org
> Cc: Gao, Liming <liming.gao@intel.com>; Zhu, Yonghong
> <yonghong.zhu@intel.com>
> Subject: RE: [Patch v1 1/1] BaseTools: create and use a standard shared
> variable for '*'
> Importance: High
>
> Yes. I prefer not to change it.
>
> Best Regards,
> Zhu Yonghong
>
>
> -----Original Message-----
> From: Carsey, Jaben
> Sent: Monday, December 03, 2018 11:19 PM
> To: Zhu, Yonghong <yonghong.zhu@intel.com>; edk2-devel@lists.01.org
> Cc: Gao, Liming <liming.gao@intel.com>
> Subject: RE: [Patch v1 1/1] BaseTools: create and use a standard shared
> variable for '*'
>
> I was trying to change all use of *, without regard to the usage of it.
>
> Do you think that mathematical * should not be changed?
>
> -Jaben
>
> > -----Original Message-----
> > From: Zhu, Yonghong
> > Sent: Sunday, December 02, 2018 6:31 PM
> > To: Carsey, Jaben <jaben.carsey@intel.com>; edk2-devel@lists.01.org
> > Cc: Gao, Liming <liming.gao@intel.com>; Zhu, Yonghong
> > <yonghong.zhu@intel.com>
> > Subject: RE: [Patch v1 1/1] BaseTools: create and use a standard
> > shared variable for '*'
> > Importance: High
> >
> > Hi Jaben,
> >
> > In this patch, it also changed the mathematics multiplicative '*'
> > (used in
> > expression) to TAB_STAR, is it by on purpose?
> > Eg:
> > - NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>',
> '<',
> > '?', ':']
> > + NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^',
> > + '~', '<<', '>>', '!', '=',
> > '>', '<', '?', ':']
> >
> > Best Regards,
> > Zhu Yonghong
> >
> > -----Original Message-----
> > From: Carsey, Jaben
> > Sent: Friday, November 16, 2018 11:40 PM
> > To: edk2-devel@lists.01.org
> > Cc: Zhu, Yonghong <yonghong.zhu@intel.com>; Gao, Liming
> > <liming.gao@intel.com>
> > Subject: [Patch v1 1/1] BaseTools: create and use a standard shared
> > variable for '*'
> >
> > add a variable for the string '*' and then use it instead of lots of '*'
> >
> > Cc: Yonghong Zhu <yonghong.zhu@intel.com>
> > Cc: Liming Gao <liming.gao@intel.com>
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
> > ---
> > BaseTools/Source/Python/AutoGen/AutoGen.py | 54 ++++++++++---
> > -------
> > BaseTools/Source/Python/AutoGen/BuildEngine.py | 10 ++--
> > BaseTools/Source/Python/BPDG/GenVpd.py | 14 ++---
> > BaseTools/Source/Python/Common/DataType.py | 1 +
> > BaseTools/Source/Python/Common/Expression.py | 4 +-
> > BaseTools/Source/Python/Common/Misc.py | 2 +-
> > BaseTools/Source/Python/Common/ToolDefClassObject.py | 23 +++++----
> > BaseTools/Source/Python/Common/VpdInfoFile.py | 8 +--
> > BaseTools/Source/Python/GenFds/FdfParser.py | 5 +-
> > BaseTools/Source/Python/GenFds/GenFds.py | 2 +-
> > BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py | 8 +--
> > BaseTools/Source/Python/GenFds/Section.py | 2 +-
> > BaseTools/Source/Python/Workspace/DscBuildData.py | 6 +--
> > 13 files changed, 70 insertions(+), 69 deletions(-)
> >
> > diff --git a/BaseTools/Source/Python/AutoGen/AutoGen.py
> > b/BaseTools/Source/Python/AutoGen/AutoGen.py
> > index f3560bfc787d..25417c447061 100644
> > --- a/BaseTools/Source/Python/AutoGen/AutoGen.py
> > +++ b/BaseTools/Source/Python/AutoGen/AutoGen.py
> > @@ -1438,7 +1438,7 @@ class PlatformAutoGen(AutoGen):
> > PcdValue = Sku.DefaultValue
> > if PcdValue == "":
> > PcdValue = Pcd.DefaultValue
> > - if Sku.VpdOffset != '*':
> > + if Sku.VpdOffset != TAB_STAR:
> > if PcdValue.startswith("{"):
> > Alignment = 8
> > elif PcdValue.startswith("L"):
> > @@ -1462,7 +1462,7 @@ class PlatformAutoGen(AutoGen):
> > VpdFile.Add(Pcd, SkuName, Sku.VpdOffset)
> > SkuValueMap[PcdValue].append(Sku)
> > # if the offset of a VPD is *, then it need
> > to be fixed up by third party tool.
> > - if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
> > + if not NeedProcessVpdMapFile and
> > + Sku.VpdOffset ==
> > TAB_STAR:
> > NeedProcessVpdMapFile = True
> > if self.Platform.VpdToolGuid is None or
> > self.Platform.VpdToolGuid == '':
> > EdkLogger.error("Build",
> > FILE_NOT_FOUND, \ @@ -1522,7
> > +1522,7 @@ class PlatformAutoGen(AutoGen):
> > PcdValue = Sku.DefaultValue
> > if PcdValue == "":
> > PcdValue = DscPcdEntry.DefaultValue
> > - if Sku.VpdOffset != '*':
> > + if Sku.VpdOffset != TAB_STAR:
> > if PcdValue.startswith("{"):
> > Alignment = 8
> > elif PcdValue.startswith("L"):
> > @@ -1545,7 +1545,7 @@ class PlatformAutoGen(AutoGen):
> > SkuValueMap[PcdValue] = []
> > VpdFile.Add(DscPcdEntry, SkuName, Sku.VpdOffset)
> > SkuValueMap[PcdValue].append(Sku)
> > - if not NeedProcessVpdMapFile and Sku.VpdOffset ==
> "*":
> > + if not NeedProcessVpdMapFile and
> > + Sku.VpdOffset ==
> > TAB_STAR:
> > NeedProcessVpdMapFile = True
> > if DscPcdEntry.DatumType == TAB_VOID and
> > PcdValue.startswith("L"):
> > UnicodePcdArray.add(DscPcdEntry) @@
> > -1573,7 +1573,7 @@ class PlatformAutoGen(AutoGen):
> > if os.path.exists(VpdMapFilePath):
> > VpdFile.Read(VpdMapFilePath)
> >
> > - # Fixup "*" offset
> > + # Fixup TAB_STAR offset
> > for pcd in VpdSkuMap:
> > vpdinfo = VpdFile.GetVpdInfo(pcd)
> > if vpdinfo is None:
> > @@ -2210,15 +2210,15 @@ class PlatformAutoGen(AutoGen):
> > def CalculatePriorityValue(self, Key):
> > Target, ToolChain, Arch, CommandType, Attr = Key.split('_')
> > PriorityValue = 0x11111
> > - if Target == "*":
> > + if Target == TAB_STAR:
> > PriorityValue &= 0x01111
> > - if ToolChain == "*":
> > + if ToolChain == TAB_STAR:
> > PriorityValue &= 0x10111
> > - if Arch == "*":
> > + if Arch == TAB_STAR:
> > PriorityValue &= 0x11011
> > - if CommandType == "*":
> > + if CommandType == TAB_STAR:
> > PriorityValue &= 0x11101
> > - if Attr == "*":
> > + if Attr == TAB_STAR:
> > PriorityValue &= 0x11110
> >
> > return self.PrioList["0x%0.5x" % PriorityValue] @@ -2253,9
> > +2253,9 @@ class PlatformAutoGen(AutoGen):
> > if (Key[0] == self.BuildRuleFamily and
> > (ModuleStyle is None or len(Key) < 3 or (len(Key) > 2
> > and Key[2] ==
> > ModuleStyle))):
> > Target, ToolChain, Arch, CommandType, Attr = Key[1].split('_')
> > - if (Target == self.BuildTarget or Target == "*") and\
> > - (ToolChain == self.ToolChain or ToolChain == "*") and\
> > - (Arch == self.Arch or Arch == "*") and\
> > + if (Target == self.BuildTarget or Target == TAB_STAR) and\
> > + (ToolChain == self.ToolChain or ToolChain == TAB_STAR) and\
> > + (Arch == self.Arch or Arch == TAB_STAR) and\
> > Options[Key].startswith("="):
> >
> > if OverrideList.get(Key[1]) is not None:
> > @@ -2276,11 +2276,11 @@ class PlatformAutoGen(AutoGen):
> > # Compare two Key, if one is included by another,
> > choose the higher priority one
> > #
> > Target2, ToolChain2, Arch2, CommandType2, Attr2 =
> > NextKey.split("_")
> > - if (Target1 == Target2 or Target1 == "*" or Target2 == "*") and\
> > - (ToolChain1 == ToolChain2 or ToolChain1 == "*" or
> ToolChain2
> > == "*") and\
> > - (Arch1 == Arch2 or Arch1 == "*" or Arch2 == "*") and\
> > - (CommandType1 == CommandType2 or CommandType1 ==
> "*"
> > or CommandType2 == "*") and\
> > - (Attr1 == Attr2 or Attr1 == "*" or Attr2 == "*"):
> > + if (Target1 == Target2 or Target1 == TAB_STAR or
> > + Target2 ==
> > TAB_STAR) and\
> > + (ToolChain1 == ToolChain2 or ToolChain1 ==
> > + TAB_STAR or
> > ToolChain2 == TAB_STAR) and\
> > + (Arch1 == Arch2 or Arch1 == TAB_STAR or Arch2
> > + == TAB_STAR)
> > and\
> > + (CommandType1 == CommandType2 or CommandType1
> > + ==
> > TAB_STAR or CommandType2 == TAB_STAR) and\
> > + (Attr1 == Attr2 or Attr1 == TAB_STAR or Attr2 == TAB_STAR):
> >
> > if self.CalculatePriorityValue(NowKey) >
> > self.CalculatePriorityValue(NextKey):
> > if Options.get((self.BuildRuleFamily, NextKey)) is not None:
> > @@ -2309,9 +2309,9 @@ class PlatformAutoGen(AutoGen):
> > continue
> > FamilyMatch = True
> > # expand any wildcard
> > - if Target == "*" or Target == self.BuildTarget:
> > - if Tag == "*" or Tag == self.ToolChain:
> > - if Arch == "*" or Arch == self.Arch:
> > + if Target == TAB_STAR or Target == self.BuildTarget:
> > + if Tag == TAB_STAR or Tag == self.ToolChain:
> > + if Arch == TAB_STAR or Arch == self.Arch:
> > if Tool not in BuildOptions:
> > BuildOptions[Tool] = {}
> > if Attr != "FLAGS" or Attr not in
> > BuildOptions[Tool] or
> > Options[Key].startswith('='):
> > @@ -2344,9 +2344,9 @@ class PlatformAutoGen(AutoGen):
> > continue
> >
> > # expand any wildcard
> > - if Target == "*" or Target == self.BuildTarget:
> > - if Tag == "*" or Tag == self.ToolChain:
> > - if Arch == "*" or Arch == self.Arch:
> > + if Target == TAB_STAR or Target == self.BuildTarget:
> > + if Tag == TAB_STAR or Tag == self.ToolChain:
> > + if Arch == TAB_STAR or Arch == self.Arch:
> > if Tool not in BuildOptions:
> > BuildOptions[Tool] = {}
> > if Attr != "FLAGS" or Attr not in
> > BuildOptions[Tool] or
> > Options[Key].startswith('='):
> > @@ -2971,8 +2971,8 @@ class ModuleAutoGen(AutoGen):
> > @cached_property
> > def SourceFileList(self):
> > RetVal = []
> > - ToolChainTagSet = {"", "*", self.ToolChain}
> > - ToolChainFamilySet = {"", "*", self.ToolChainFamily,
> > self.BuildRuleFamily}
> > + ToolChainTagSet = {"", TAB_STAR, self.ToolChain}
> > + ToolChainFamilySet = {"", TAB_STAR, self.ToolChainFamily,
> > + self.BuildRuleFamily}
> > for F in self.Module.Sources:
> > # match tool chain
> > if F.TagName not in ToolChainTagSet:
> > @@ -3047,7 +3047,7 @@ class ModuleAutoGen(AutoGen):
> > def BinaryFileList(self):
> > RetVal = []
> > for F in self.Module.Binaries:
> > - if F.Target not in [TAB_ARCH_COMMON, '*'] and F.Target !=
> > self.BuildTarget:
> > + if F.Target not in [TAB_ARCH_COMMON, TAB_STAR] and
> > + F.Target !=
> > self.BuildTarget:
> > continue
> > RetVal.append(F)
> > self._ApplyBuildRule(F, F.Type, BinaryFileList=RetVal)
> > diff --git a/BaseTools/Source/Python/AutoGen/BuildEngine.py
> > b/BaseTools/Source/Python/AutoGen/BuildEngine.py
> > index ac7a6687552c..f9e3ac3a1daf 100644
> > --- a/BaseTools/Source/Python/AutoGen/BuildEngine.py
> > +++ b/BaseTools/Source/Python/AutoGen/BuildEngine.py
> > @@ -110,7 +110,7 @@ class FileBuildRule:
> > self.IncListFileMacro = self.INC_LIST_MACRO
> >
> > self.SourceFileType = Type
> > - # source files listed not in "*" or "?" pattern format
> > + # source files listed not in TAB_STAR or "?" pattern format
> > if not ExtraDependency:
> > self.ExtraSourceFileList = []
> > else:
> > @@ -150,12 +150,12 @@ class FileBuildRule:
> > self.SourceFileExtList = set()
> > for File in Input:
> > Base, Ext = os.path.splitext(File)
> > - if Base.find("*") >= 0:
> > - # There's "*" in the file name
> > + if Base.find(TAB_STAR) >= 0:
> > + # There's TAB_STAR in the file name
> > self.IsMultipleInput = True
> > self.GenFileListMacro = True
> > elif Base.find("?") < 0:
> > - # There's no "*" and "?" in file name
> > + # There's no TAB_STAR and "?" in file name
> > self.ExtraSourceFileList.append(File)
> > continue
> > self.SourceFileExtList.add(Ext) @@ -553,7 +553,7 @@ class
> BuildRule:
> > #
> > # @param FileExt The extension of a file
> > # @param ToolChainFamily The tool chain family name
> > - # @param BuildVersion The build version number. "*" means any
> > rule
> > + # @param BuildVersion The build version number. TAB_STAR
> means
> > any rule
> > # is applicalbe.
> > #
> > # @retval FileType The file type string
> > diff --git a/BaseTools/Source/Python/BPDG/GenVpd.py
> > b/BaseTools/Source/Python/BPDG/GenVpd.py
> > index d7852d29eed0..e5da47f95e63 100644
> > --- a/BaseTools/Source/Python/BPDG/GenVpd.py
> > +++ b/BaseTools/Source/Python/BPDG/GenVpd.py
> > @@ -21,7 +21,7 @@ import array
> > import re
> > from Common.LongFilePathSupport import OpenLongFilePath as open
> from
> > struct import * -from Common.DataType import MAX_SIZE_TYPE,
> > MAX_VAL_TYPE
> > +from Common.DataType import MAX_SIZE_TYPE, MAX_VAL_TYPE,
> > TAB_STAR
> > import Common.EdkLogger as EdkLogger
> > import Common.BuildToolError as BuildToolError
> >
> > @@ -87,7 +87,7 @@ class PcdEntry:
> > # for both hexadecimal and decimal.
> > #
> > def _GenOffsetValue(self):
> > - if self.PcdOffset != "*" :
> > + if self.PcdOffset != TAB_STAR:
> > try:
> > self.PcdBinOffset = int (self.PcdOffset)
> > except:
> > @@ -423,7 +423,7 @@ class GenVPD :
> > Alignment = 1
> >
> > PCD.Alignment = Alignment
> > - if PCD.PcdOffset != '*':
> > + if PCD.PcdOffset != TAB_STAR:
> > if PCD.PcdOccupySize % Alignment != 0:
> > if PCD.PcdUnpackValue.startswith("{"):
> > EdkLogger.warn("BPDG", "The offset value
> > of PCD %s is not 8- byte aligned!" %(PCD.PcdCName),
> > File=self.InputFileName) @@ -469,7
> > +469,7 @@ class GenVPD :
> > def FormatFileLine (self) :
> >
> > for eachPcd in self.FileLinesList :
> > - if eachPcd.PcdOffset != '*' :
> > + if eachPcd.PcdOffset != TAB_STAR :
> > # Use pcd's Offset value as key, and pcd's Value as value
> > self.PcdFixedOffsetSizeList.append(eachPcd)
> > else :
> > @@ -484,7 +484,7 @@ class GenVPD :
> > def FixVpdOffset (self):
> > # At first, the offset should start at 0
> > # Sort fixed offset list in order to find out where has free
> > spaces for the pcd's offset
> > - # value is "*" to insert into.
> > + # value is TAB_STAR to insert into.
> >
> > self.PcdFixedOffsetSizeList.sort(key=lambda x:
> > x.PcdBinOffset)
> >
> > @@ -502,7 +502,7 @@ class GenVPD :
> > self.PcdUnknownOffsetList[index+i -1 ],
> > self.PcdUnknownOffsetList[index+i] =
> > self.PcdUnknownOffsetList[index+i],
> > self.PcdUnknownOffsetList[index+i -1]
> >
> > #
> > - # Process all Offset value are "*"
> > + # Process all Offset value are TAB_STAR
> > #
> > if (len(self.PcdFixedOffsetSizeList) == 0) and
> > (len(self.PcdUnknownOffsetList) != 0) :
> > # The offset start from 0 @@ -571,7 +571,7 @@ class
> > GenVPD :
> > eachUnfixedPcd =
> > self.PcdUnknownOffsetList[countOfUnfixedList]
> > needFixPcdSize = eachUnfixedPcd.PcdOccupySize
> > # Not been fixed
> > - if eachUnfixedPcd.PcdOffset == '*' :
> > + if eachUnfixedPcd.PcdOffset == TAB_STAR :
> > if LastOffset % eachUnfixedPcd.Alignment != 0:
> > LastOffset = (LastOffset /
> > eachUnfixedPcd.Alignment + 1) * eachUnfixedPcd.Alignment
> > # The offset un-fixed pcd can write into
> > this free space diff -- git
> > a/BaseTools/Source/Python/Common/DataType.py
> > b/BaseTools/Source/Python/Common/DataType.py
> > index 1d1d22faa40b..6b375712b65e 100644
> > --- a/BaseTools/Source/Python/Common/DataType.py
> > +++ b/BaseTools/Source/Python/Common/DataType.py
> > @@ -31,6 +31,7 @@ TAB_OPTION_START = '<'
> > TAB_OPTION_END = '>'
> > TAB_SLASH = '\\'
> > TAB_BACK_SLASH = '/'
> > +TAB_STAR = '*'
> > TAB_LINE_BREAK = '\n'
> > TAB_PRINTCHAR_VT = '\x0b'
> > TAB_PRINTCHAR_BS = '\b'
> > diff --git a/BaseTools/Source/Python/Common/Expression.py
> > b/BaseTools/Source/Python/Common/Expression.py
> > index a21ab5daa73e..db1310d534fb 100644
> > --- a/BaseTools/Source/Python/Common/Expression.py
> > +++ b/BaseTools/Source/Python/Common/Expression.py
> > @@ -244,7 +244,7 @@ class ValueExpression(BaseExpression):
> > 'IN' : 'in'
> > }
> >
> > - NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>',
> '<',
> > '?', ':']
> > + NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^',
> > + '~', '<<', '>>', '!', '=', '>', '<', '?', ':']
> >
> >
> > SymbolPattern = re.compile("("
> > @@ -498,7 +498,7 @@ class ValueExpression(BaseExpression):
> >
> > # A [ * B]*
> > def _MulExpr(self):
> > - return self._ExprFuncTemplate(self._UnaryExpr, {"*", "/", "%"})
> > + return self._ExprFuncTemplate(self._UnaryExpr, {TAB_STAR,
> > + "/",
> > + "%"})
> >
> > # [!]*A
> > def _UnaryExpr(self):
> > diff --git a/BaseTools/Source/Python/Common/Misc.py
> > b/BaseTools/Source/Python/Common/Misc.py
> > index 3b8efb2e7179..61ba79241fb6 100644
> > --- a/BaseTools/Source/Python/Common/Misc.py
> > +++ b/BaseTools/Source/Python/Common/Misc.py
> > @@ -1088,7 +1088,7 @@ class tdict:
> > _ListType = type([])
> > _TupleType = type(())
> > _Wildcard = 'COMMON'
> > - _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', '*', 'PLATFORM']
> > + _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', TAB_STAR,
> > + 'PLATFORM']
> >
> > def __init__(self, _Single_=False, _Level_=2):
> > self._Level_ = _Level_
> > diff --git a/BaseTools/Source/Python/Common/ToolDefClassObject.py
> > b/BaseTools/Source/Python/Common/ToolDefClassObject.py
> > index 05a1ddfbcc89..186d279840c1 100644
> > --- a/BaseTools/Source/Python/Common/ToolDefClassObject.py
> > +++ b/BaseTools/Source/Python/Common/ToolDefClassObject.py
> > @@ -29,7 +29,8 @@ from Common import GlobalData from
> > Common.MultipleWorkspace import MultipleWorkspace as mws from
> > .DataType import TAB_TOD_DEFINES_TARGET,
> > TAB_TOD_DEFINES_TOOL_CHAIN_TAG,\
> > TAB_TOD_DEFINES_TARGET_ARCH,
> > TAB_TOD_DEFINES_COMMAND_TYPE\
> > - , TAB_TOD_DEFINES_FAMILY,
> > TAB_TOD_DEFINES_BUILDRULEFAMILY
> > + , TAB_TOD_DEFINES_FAMILY,
> > TAB_TOD_DEFINES_BUILDRULEFAMILY,\
> > + TAB_STAR, TAB_TAT_DEFINES_TOOL_CHAIN_CONF
> >
> >
> > ##
> > @@ -97,7 +98,7 @@ class ToolDefClassObject(object):
> > # adding/removing items from the original dict.
> > for Key in list(self.ToolsDefTxtDictionary.keys()):
> > List = Key.split('_')
> > - if List[Index] == '*':
> > + if List[Index] == TAB_STAR:
> > for String in self.ToolsDefTxtDatabase[KeyList[Index]]:
> > List[Index] = String
> > NewKey = '%s_%s_%s_%s_%s' % tuple(List) @@
> > -202,20 +203,20 @@ class ToolDefClassObject(object):
> > if len(List) != 5:
> > EdkLogger.verbose("Line %d: Not a valid name of
> > definition: %s" % ((Index + 1), Name))
> > continue
> > - elif List[4] == '*':
> > + elif List[4] == TAB_STAR:
> > EdkLogger.verbose("Line %d: '*' is not allowed in
> > last field: %s" % ((Index + 1), Name))
> > continue
> > else:
> > self.ToolsDefTxtDictionary[Name] = Value
> > - if List[0] != '*':
> > + if List[0] != TAB_STAR:
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET]
> > += [List[0]]
> > - if List[1] != '*':
> > + if List[1] != TAB_STAR:
> >
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TOOL_CHAIN_TAG]
> > += [List[1]]
> > - if List[2] != '*':
> > + if List[2] != TAB_STAR:
> >
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET_ARCH] += [List[2]]
> > - if List[3] != '*':
> > + if List[3] != TAB_STAR:
> >
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_COMMAND_TYPE]
> > += [List[3]]
> > - if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] == '*' and
> List[3]
> > == '*':
> > + if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] ==
> > + TAB_STAR
> > and List[3] == TAB_STAR:
> > if TAB_TOD_DEFINES_FAMILY not in self.ToolsDefTxtDatabase:
> >
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY] = {}
> >
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]] = Value @@
> -226,7 +227,7 @@ class ToolDefClassObject(object):
> >
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_BUILDRULEFAMILY][List[1]] =
> > Value
> > elif
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]]
> > != Value:
> > EdkLogger.verbose("Line %d: No override
> > allowed for the family of a tool chain: %s" % ((Index + 1), Name))
> > - if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and List[2] ==
> '*'
> > and List[3] == '*':
> > + if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and
> > + List[2] ==
> > TAB_STAR and List[3] == TAB_STAR:
> > if TAB_TOD_DEFINES_BUILDRULEFAMILY not in
> > self.ToolsDefTxtDatabase \
> > or List[1] not in
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY]:
> > EdkLogger.verbose("Line %d: The family is not
> > specified, but BuildRuleFamily is specified for the tool chain: %s" %
> > ((Index + 1), Name)) @@ -270,8 +271,8 @@ class
> ToolDefClassObject(object):
> > def ToolDefDict(ConfDir):
> > Target = TargetTxtDict(ConfDir)
> > ToolDef = ToolDefClassObject()
> > - if DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CONF in
> > Target.TargetTxtDictionary:
> > - ToolsDefFile =
> >
> Target.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CON
> > F]
> > + if TAB_TAT_DEFINES_TOOL_CHAIN_CONF in Target.TargetTxtDictionary:
> > + ToolsDefFile =
> > + Target.TargetTxtDictionary[TAB_TAT_DEFINES_TOOL_CHAIN_CONF]
> > if ToolsDefFile:
> > ToolDef.LoadToolDefFile(os.path.normpath(ToolsDefFile))
> > else:
> > diff --git a/BaseTools/Source/Python/Common/VpdInfoFile.py
> > b/BaseTools/Source/Python/Common/VpdInfoFile.py
> > index 2fb8e66fe99c..3be0670e36fb 100644
> > --- a/BaseTools/Source/Python/Common/VpdInfoFile.py
> > +++ b/BaseTools/Source/Python/Common/VpdInfoFile.py
> > @@ -57,7 +57,7 @@ FILE_COMMENT_TEMPLATE = \
> > # <PcdName> ::= <TokenSpaceCName> "." <PcdCName>
> > # <TokenSpaceCName> ::= C Variable Name of the Token Space GUID
> > # <PcdCName> ::= C Variable Name of the PCD
> > -# <Offset> ::= {"*"} {<HexNumber>}
> > +# <Offset> ::= {TAB_STAR} {<HexNumber>}
> > # <HexNumber> ::= "0x" (a-fA-F0-9){1,8}
> > # <Size> ::= <HexNumber>
> > # <Value> ::= {<HexNumber>} {<NonNegativeInt>} {<QString>}
> > {<Array>}
> > @@ -92,7 +92,7 @@ class VpdInfoFile:
> > if (Vpd is None):
> > EdkLogger.error("VpdInfoFile",
> > BuildToolError.ATTRIBUTE_UNKNOWN_ERROR, "Invalid VPD PCD entry.")
> >
> > - if not (Offset >= 0 or Offset == "*"):
> > + if not (Offset >= 0 or Offset == TAB_STAR):
> > EdkLogger.error("VpdInfoFile",
> > BuildToolError.PARAMETER_INVALID, "Invalid offset parameter: %s." %
> > Offset)
> >
> > if Vpd.DatumType == TAB_VOID:
> > @@ -186,8 +186,8 @@ class VpdInfoFile:
> > VpdObjectTokenCName = PcdItem[0]
> > for sku in VpdObject.SkuInfoList:
> > if VpdObject.TokenSpaceGuidCName ==
> > TokenSpaceName and VpdObjectTokenCName == PcdTokenName.strip()
> and sku == SkuId:
> > - if self._VpdArray[VpdObject][sku] == "*":
> > - if Offset == "*":
> > + if self._VpdArray[VpdObject][sku] == TAB_STAR:
> > + if Offset == TAB_STAR:
> > EdkLogger.error("BPDG",
> > BuildToolError.FORMAT_INVALID, "The offset of %s has not been fixed up
> > by third-party BPDG tool." %
> > PcdName)
> > self._VpdArray[VpdObject][sku] = Offset
> > Found = True
> > diff --git a/BaseTools/Source/Python/GenFds/FdfParser.py
> > b/BaseTools/Source/Python/GenFds/FdfParser.py
> > index 44cc8f63d07b..cedc4ea0c122 100644
> > --- a/BaseTools/Source/Python/GenFds/FdfParser.py
> > +++ b/BaseTools/Source/Python/GenFds/FdfParser.py
> > @@ -64,7 +64,6 @@ T_CHAR_CR = '\r'
> > T_CHAR_TAB = '\t'
> > T_CHAR_DOUBLE_QUOTE = '\"'
> > T_CHAR_SINGLE_QUOTE = '\''
> > -T_CHAR_STAR = '*'
> > T_CHAR_BRACE_R = '}'
> >
> > SEPARATORS = {TAB_EQUAL_SPLIT, TAB_VALUE_SPLIT,
> TAB_COMMA_SPLIT, '{',
> > T_CHAR_BRACE_R} @@ -533,7 +532,7 @@ class
> > FdfParser:
> > InComment = False
> > HashComment = False
> > # check for */ comment end
> > - elif InComment and not DoubleSlashComment and not
> HashComment
> > and self._CurrentChar() == T_CHAR_STAR and self._NextChar() ==
> > TAB_BACK_SLASH:
> > + elif InComment and not DoubleSlashComment and not
> > HashComment and self._CurrentChar() == TAB_STAR and self._NextChar()
> > == TAB_BACK_SLASH:
> > self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> > self._GetOneChar()
> > self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> > @@ -552,7 +551,7 @@ class FdfParser:
> > InComment = True
> > HashComment = True
> > # check for /* comment start
> > - elif self._CurrentChar() == TAB_BACK_SLASH and self._NextChar()
> ==
> > T_CHAR_STAR:
> > + elif self._CurrentChar() == TAB_BACK_SLASH and
> > + self._NextChar() ==
> > TAB_STAR:
> > self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> > self._GetOneChar()
> > self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> > diff --git a/BaseTools/Source/Python/GenFds/GenFds.py
> > b/BaseTools/Source/Python/GenFds/GenFds.py
> > index 0c8091b79841..0513f488fca3 100644
> > --- a/BaseTools/Source/Python/GenFds/GenFds.py
> > +++ b/BaseTools/Source/Python/GenFds/GenFds.py
> > @@ -653,7 +653,7 @@ class GenFds(object):
> > FileGuidList.append(FileStatementGuid)
> > Name = []
> > FfsPath = os.path.join(GenFdsGlobalVariable.FvDir, 'Ffs')
> > - FfsPath = glob(os.path.join(FfsPath, FileStatementGuid) + '*')
> > + FfsPath = glob(os.path.join(FfsPath,
> > + FileStatementGuid) + TAB_STAR)
> > if not FfsPath:
> > continue
> > if not os.path.exists(FfsPath[0]):
> > diff --git a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> > b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> > index ea61f723a73c..0812c56bdae8 100644
> > --- a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> > +++ b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> > @@ -217,12 +217,12 @@ class GenFdsGlobalVariable:
> >
> > if not Inf.IsBinaryModule:
> > for File in Inf.Sources:
> > - if File.TagName in {"", "*", GenFdsGlobalVariable.ToolChainTag}
> and
> > \
> > - File.ToolChainFamily in {"", "*",
> > GenFdsGlobalVariable.ToolChainFamily}:
> > + if File.TagName in {"", DataType.TAB_STAR,
> > GenFdsGlobalVariable.ToolChainTag} and \
> > + File.ToolChainFamily in {"", DataType.TAB_STAR,
> > GenFdsGlobalVariable.ToolChainFamily}:
> > FileList.append((File,
> > DataType.TAB_UNKNOWN_FILE))
> >
> > for File in Inf.Binaries:
> > - if File.Target in {DataType.TAB_COMMON, '*',
> > GenFdsGlobalVariable.TargetName}:
> > + if File.Target in {DataType.TAB_COMMON,
> > + DataType.TAB_STAR,
> > GenFdsGlobalVariable.TargetName}:
> > FileList.append((File, File.Type))
> >
> > for File, FileType in FileList:
> > @@ -893,7 +893,7 @@ def FindExtendTool(KeyStringList, CurrentArchList,
> > NameGuid):
> > for Index in range(2, -1, -1):
> > for Key in list(BuildOption.keys()):
> > List = Key.split('_')
> > - if List[Index] == '*':
> > + if List[Index] == DataType.TAB_STAR:
> > for String in ToolDb[ToolList[Index]]:
> > if String in [Arch,
> > GenFdsGlobalVariable.TargetName,
> > GenFdsGlobalVariable.ToolChainTag]:
> > List[Index] = String diff --git
> > a/BaseTools/Source/Python/GenFds/Section.py
> > b/BaseTools/Source/Python/GenFds/Section.py
> > index 19a70009dcce..bab74aedf0b9 100644
> > --- a/BaseTools/Source/Python/GenFds/Section.py
> > +++ b/BaseTools/Source/Python/GenFds/Section.py
> > @@ -131,7 +131,7 @@ class Section (SectionClassObject):
> > if File.Type == FileType or
> > (int(FfsInf.PiSpecVersion, 16) >= 0x0001000A \
> > and FileType ==
> > 'DXE_DPEX' and File.Type ==
> > BINARY_FILE_TYPE_SMM_DEPEX) \
> > or (FileType ==
> > BINARY_FILE_TYPE_TE and File.Type == BINARY_FILE_TYPE_PE32):
> > - if '*' in FfsInf.TargetOverrideList or File.Target == '*' or
> > File.Target in FfsInf.TargetOverrideList or FfsInf.TargetOverrideList == []:
> > + if TAB_STAR in FfsInf.TargetOverrideList or
> > + File.Target ==
> > TAB_STAR or File.Target in FfsInf.TargetOverrideList or
> > FfsInf.TargetOverrideList == []:
> > FileList.append(FfsInf.PatchEfiFile(File.Path, File.Type))
> > else:
> > GenFdsGlobalVariable.InfLogger ("\nBuild
> > Target \'%s\' of File %s is not in the Scope of %s specified by INF %s
> > in FDF" %(File.Target, File.File, FfsInf.TargetOverrideList,
> > FfsInf.InfFileName)) diff --git
> > a/BaseTools/Source/Python/Workspace/DscBuildData.py
> > b/BaseTools/Source/Python/Workspace/DscBuildData.py
> > index 11aa63fb263c..22cbbb119a5a 100644
> > --- a/BaseTools/Source/Python/Workspace/DscBuildData.py
> > +++ b/BaseTools/Source/Python/Workspace/DscBuildData.py
> > @@ -2315,11 +2315,11 @@ class DscBuildData(PlatformBuildClassObject):
> > continue
> > if Attr != "FLAGS":
> > continue
> > - if Target == "*" or Target == self._Target:
> > - if Tag == "*" or Tag == self._Toolchain:
> > + if Target == TAB_STAR or Target == self._Target:
> > + if Tag == TAB_STAR or Tag == self._Toolchain:
> > if 'COMMON' not in BuildOptions:
> > BuildOptions['COMMON'] = set()
> > - if Arch == "*":
> > + if Arch == TAB_STAR:
> > BuildOptions['COMMON'].add(self.BuildOptions[Options])
> > if Arch in self.SupArchList:
> > if Arch not in BuildOptions:
> > --
> > 2.16.2.windows.1
next prev parent reply other threads:[~2018-12-07 0:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1542382796.git.jaben.carsey@intel.com>
2018-11-16 15:40 ` [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*' Jaben Carsey
2018-11-27 18:02 ` Carsey, Jaben
2018-11-28 7:37 ` Feng, Bob C
2018-12-03 2:30 ` Zhu, Yonghong
2018-12-03 15:19 ` Carsey, Jaben
2018-12-04 1:52 ` Zhu, Yonghong
2018-12-07 0:50 ` Carsey, Jaben [this message]
2018-12-07 0:53 ` Carsey, Jaben
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CB6E33457884FA40993F35157061515CB122C15F@ORSMSX153.amr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox