* Re: [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*'
2018-11-16 15:40 ` [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*' Jaben Carsey
@ 2018-11-27 18:02 ` Carsey, Jaben
2018-11-28 7:37 ` Feng, Bob C
2018-12-03 2:30 ` Zhu, Yonghong
2 siblings, 0 replies; 8+ messages in thread
From: Carsey, Jaben @ 2018-11-27 18:02 UTC (permalink / raw)
To: Carsey, Jaben, edk2-devel@lists.01.org; +Cc: Gao, Liming, Zhu, Yonghong
Poke. Any comments on this one?
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Jaben Carsey
> Sent: Friday, November 16, 2018 7:40 AM
> To: edk2-devel@lists.01.org
> Cc: Gao, Liming <liming.gao@intel.com>
> Subject: [edk2] [Patch v1 1/1] BaseTools: create and use a standard shared
> variable for '*'
> Importance: High
>
> add a variable for the string '*' and then use it instead of lots of '*'
>
> Cc: Yonghong Zhu <yonghong.zhu@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
> ---
> BaseTools/Source/Python/AutoGen/AutoGen.py | 54 ++++++++++---
> -------
> BaseTools/Source/Python/AutoGen/BuildEngine.py | 10 ++--
> BaseTools/Source/Python/BPDG/GenVpd.py | 14 ++---
> BaseTools/Source/Python/Common/DataType.py | 1 +
> BaseTools/Source/Python/Common/Expression.py | 4 +-
> BaseTools/Source/Python/Common/Misc.py | 2 +-
> BaseTools/Source/Python/Common/ToolDefClassObject.py | 23 +++++----
> BaseTools/Source/Python/Common/VpdInfoFile.py | 8 +--
> BaseTools/Source/Python/GenFds/FdfParser.py | 5 +-
> BaseTools/Source/Python/GenFds/GenFds.py | 2 +-
> BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py | 8 +--
> BaseTools/Source/Python/GenFds/Section.py | 2 +-
> BaseTools/Source/Python/Workspace/DscBuildData.py | 6 +--
> 13 files changed, 70 insertions(+), 69 deletions(-)
>
> diff --git a/BaseTools/Source/Python/AutoGen/AutoGen.py
> b/BaseTools/Source/Python/AutoGen/AutoGen.py
> index f3560bfc787d..25417c447061 100644
> --- a/BaseTools/Source/Python/AutoGen/AutoGen.py
> +++ b/BaseTools/Source/Python/AutoGen/AutoGen.py
> @@ -1438,7 +1438,7 @@ class PlatformAutoGen(AutoGen):
> PcdValue = Sku.DefaultValue
> if PcdValue == "":
> PcdValue = Pcd.DefaultValue
> - if Sku.VpdOffset != '*':
> + if Sku.VpdOffset != TAB_STAR:
> if PcdValue.startswith("{"):
> Alignment = 8
> elif PcdValue.startswith("L"):
> @@ -1462,7 +1462,7 @@ class PlatformAutoGen(AutoGen):
> VpdFile.Add(Pcd, SkuName, Sku.VpdOffset)
> SkuValueMap[PcdValue].append(Sku)
> # if the offset of a VPD is *, then it need to be fixed up by third
> party tool.
> - if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
> + if not NeedProcessVpdMapFile and Sku.VpdOffset ==
> TAB_STAR:
> NeedProcessVpdMapFile = True
> if self.Platform.VpdToolGuid is None or
> self.Platform.VpdToolGuid == '':
> EdkLogger.error("Build", FILE_NOT_FOUND, \
> @@ -1522,7 +1522,7 @@ class PlatformAutoGen(AutoGen):
> PcdValue = Sku.DefaultValue
> if PcdValue == "":
> PcdValue = DscPcdEntry.DefaultValue
> - if Sku.VpdOffset != '*':
> + if Sku.VpdOffset != TAB_STAR:
> if PcdValue.startswith("{"):
> Alignment = 8
> elif PcdValue.startswith("L"):
> @@ -1545,7 +1545,7 @@ class PlatformAutoGen(AutoGen):
> SkuValueMap[PcdValue] = []
> VpdFile.Add(DscPcdEntry, SkuName, Sku.VpdOffset)
> SkuValueMap[PcdValue].append(Sku)
> - if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
> + if not NeedProcessVpdMapFile and Sku.VpdOffset ==
> TAB_STAR:
> NeedProcessVpdMapFile = True
> if DscPcdEntry.DatumType == TAB_VOID and
> PcdValue.startswith("L"):
> UnicodePcdArray.add(DscPcdEntry)
> @@ -1573,7 +1573,7 @@ class PlatformAutoGen(AutoGen):
> if os.path.exists(VpdMapFilePath):
> VpdFile.Read(VpdMapFilePath)
>
> - # Fixup "*" offset
> + # Fixup TAB_STAR offset
> for pcd in VpdSkuMap:
> vpdinfo = VpdFile.GetVpdInfo(pcd)
> if vpdinfo is None:
> @@ -2210,15 +2210,15 @@ class PlatformAutoGen(AutoGen):
> def CalculatePriorityValue(self, Key):
> Target, ToolChain, Arch, CommandType, Attr = Key.split('_')
> PriorityValue = 0x11111
> - if Target == "*":
> + if Target == TAB_STAR:
> PriorityValue &= 0x01111
> - if ToolChain == "*":
> + if ToolChain == TAB_STAR:
> PriorityValue &= 0x10111
> - if Arch == "*":
> + if Arch == TAB_STAR:
> PriorityValue &= 0x11011
> - if CommandType == "*":
> + if CommandType == TAB_STAR:
> PriorityValue &= 0x11101
> - if Attr == "*":
> + if Attr == TAB_STAR:
> PriorityValue &= 0x11110
>
> return self.PrioList["0x%0.5x" % PriorityValue]
> @@ -2253,9 +2253,9 @@ class PlatformAutoGen(AutoGen):
> if (Key[0] == self.BuildRuleFamily and
> (ModuleStyle is None or len(Key) < 3 or (len(Key) > 2 and Key[2] ==
> ModuleStyle))):
> Target, ToolChain, Arch, CommandType, Attr = Key[1].split('_')
> - if (Target == self.BuildTarget or Target == "*") and\
> - (ToolChain == self.ToolChain or ToolChain == "*") and\
> - (Arch == self.Arch or Arch == "*") and\
> + if (Target == self.BuildTarget or Target == TAB_STAR) and\
> + (ToolChain == self.ToolChain or ToolChain == TAB_STAR) and\
> + (Arch == self.Arch or Arch == TAB_STAR) and\
> Options[Key].startswith("="):
>
> if OverrideList.get(Key[1]) is not None:
> @@ -2276,11 +2276,11 @@ class PlatformAutoGen(AutoGen):
> # Compare two Key, if one is included by another, choose the
> higher priority one
> #
> Target2, ToolChain2, Arch2, CommandType2, Attr2 =
> NextKey.split("_")
> - if (Target1 == Target2 or Target1 == "*" or Target2 == "*") and\
> - (ToolChain1 == ToolChain2 or ToolChain1 == "*" or ToolChain2
> == "*") and\
> - (Arch1 == Arch2 or Arch1 == "*" or Arch2 == "*") and\
> - (CommandType1 == CommandType2 or CommandType1 == "*"
> or CommandType2 == "*") and\
> - (Attr1 == Attr2 or Attr1 == "*" or Attr2 == "*"):
> + if (Target1 == Target2 or Target1 == TAB_STAR or Target2 ==
> TAB_STAR) and\
> + (ToolChain1 == ToolChain2 or ToolChain1 == TAB_STAR or
> ToolChain2 == TAB_STAR) and\
> + (Arch1 == Arch2 or Arch1 == TAB_STAR or Arch2 == TAB_STAR)
> and\
> + (CommandType1 == CommandType2 or CommandType1 ==
> TAB_STAR or CommandType2 == TAB_STAR) and\
> + (Attr1 == Attr2 or Attr1 == TAB_STAR or Attr2 == TAB_STAR):
>
> if self.CalculatePriorityValue(NowKey) >
> self.CalculatePriorityValue(NextKey):
> if Options.get((self.BuildRuleFamily, NextKey)) is not None:
> @@ -2309,9 +2309,9 @@ class PlatformAutoGen(AutoGen):
> continue
> FamilyMatch = True
> # expand any wildcard
> - if Target == "*" or Target == self.BuildTarget:
> - if Tag == "*" or Tag == self.ToolChain:
> - if Arch == "*" or Arch == self.Arch:
> + if Target == TAB_STAR or Target == self.BuildTarget:
> + if Tag == TAB_STAR or Tag == self.ToolChain:
> + if Arch == TAB_STAR or Arch == self.Arch:
> if Tool not in BuildOptions:
> BuildOptions[Tool] = {}
> if Attr != "FLAGS" or Attr not in BuildOptions[Tool] or
> Options[Key].startswith('='):
> @@ -2344,9 +2344,9 @@ class PlatformAutoGen(AutoGen):
> continue
>
> # expand any wildcard
> - if Target == "*" or Target == self.BuildTarget:
> - if Tag == "*" or Tag == self.ToolChain:
> - if Arch == "*" or Arch == self.Arch:
> + if Target == TAB_STAR or Target == self.BuildTarget:
> + if Tag == TAB_STAR or Tag == self.ToolChain:
> + if Arch == TAB_STAR or Arch == self.Arch:
> if Tool not in BuildOptions:
> BuildOptions[Tool] = {}
> if Attr != "FLAGS" or Attr not in BuildOptions[Tool] or
> Options[Key].startswith('='):
> @@ -2971,8 +2971,8 @@ class ModuleAutoGen(AutoGen):
> @cached_property
> def SourceFileList(self):
> RetVal = []
> - ToolChainTagSet = {"", "*", self.ToolChain}
> - ToolChainFamilySet = {"", "*", self.ToolChainFamily,
> self.BuildRuleFamily}
> + ToolChainTagSet = {"", TAB_STAR, self.ToolChain}
> + ToolChainFamilySet = {"", TAB_STAR, self.ToolChainFamily,
> self.BuildRuleFamily}
> for F in self.Module.Sources:
> # match tool chain
> if F.TagName not in ToolChainTagSet:
> @@ -3047,7 +3047,7 @@ class ModuleAutoGen(AutoGen):
> def BinaryFileList(self):
> RetVal = []
> for F in self.Module.Binaries:
> - if F.Target not in [TAB_ARCH_COMMON, '*'] and F.Target !=
> self.BuildTarget:
> + if F.Target not in [TAB_ARCH_COMMON, TAB_STAR] and F.Target !=
> self.BuildTarget:
> continue
> RetVal.append(F)
> self._ApplyBuildRule(F, F.Type, BinaryFileList=RetVal)
> diff --git a/BaseTools/Source/Python/AutoGen/BuildEngine.py
> b/BaseTools/Source/Python/AutoGen/BuildEngine.py
> index ac7a6687552c..f9e3ac3a1daf 100644
> --- a/BaseTools/Source/Python/AutoGen/BuildEngine.py
> +++ b/BaseTools/Source/Python/AutoGen/BuildEngine.py
> @@ -110,7 +110,7 @@ class FileBuildRule:
> self.IncListFileMacro = self.INC_LIST_MACRO
>
> self.SourceFileType = Type
> - # source files listed not in "*" or "?" pattern format
> + # source files listed not in TAB_STAR or "?" pattern format
> if not ExtraDependency:
> self.ExtraSourceFileList = []
> else:
> @@ -150,12 +150,12 @@ class FileBuildRule:
> self.SourceFileExtList = set()
> for File in Input:
> Base, Ext = os.path.splitext(File)
> - if Base.find("*") >= 0:
> - # There's "*" in the file name
> + if Base.find(TAB_STAR) >= 0:
> + # There's TAB_STAR in the file name
> self.IsMultipleInput = True
> self.GenFileListMacro = True
> elif Base.find("?") < 0:
> - # There's no "*" and "?" in file name
> + # There's no TAB_STAR and "?" in file name
> self.ExtraSourceFileList.append(File)
> continue
> self.SourceFileExtList.add(Ext)
> @@ -553,7 +553,7 @@ class BuildRule:
> #
> # @param FileExt The extension of a file
> # @param ToolChainFamily The tool chain family name
> - # @param BuildVersion The build version number. "*" means any
> rule
> + # @param BuildVersion The build version number. TAB_STAR means
> any rule
> # is applicalbe.
> #
> # @retval FileType The file type string
> diff --git a/BaseTools/Source/Python/BPDG/GenVpd.py
> b/BaseTools/Source/Python/BPDG/GenVpd.py
> index d7852d29eed0..e5da47f95e63 100644
> --- a/BaseTools/Source/Python/BPDG/GenVpd.py
> +++ b/BaseTools/Source/Python/BPDG/GenVpd.py
> @@ -21,7 +21,7 @@ import array
> import re
> from Common.LongFilePathSupport import OpenLongFilePath as open
> from struct import *
> -from Common.DataType import MAX_SIZE_TYPE, MAX_VAL_TYPE
> +from Common.DataType import MAX_SIZE_TYPE, MAX_VAL_TYPE,
> TAB_STAR
> import Common.EdkLogger as EdkLogger
> import Common.BuildToolError as BuildToolError
>
> @@ -87,7 +87,7 @@ class PcdEntry:
> # for both hexadecimal and decimal.
> #
> def _GenOffsetValue(self):
> - if self.PcdOffset != "*" :
> + if self.PcdOffset != TAB_STAR:
> try:
> self.PcdBinOffset = int (self.PcdOffset)
> except:
> @@ -423,7 +423,7 @@ class GenVPD :
> Alignment = 1
>
> PCD.Alignment = Alignment
> - if PCD.PcdOffset != '*':
> + if PCD.PcdOffset != TAB_STAR:
> if PCD.PcdOccupySize % Alignment != 0:
> if PCD.PcdUnpackValue.startswith("{"):
> EdkLogger.warn("BPDG", "The offset value of PCD %s is not 8-
> byte aligned!" %(PCD.PcdCName), File=self.InputFileName)
> @@ -469,7 +469,7 @@ class GenVPD :
> def FormatFileLine (self) :
>
> for eachPcd in self.FileLinesList :
> - if eachPcd.PcdOffset != '*' :
> + if eachPcd.PcdOffset != TAB_STAR :
> # Use pcd's Offset value as key, and pcd's Value as value
> self.PcdFixedOffsetSizeList.append(eachPcd)
> else :
> @@ -484,7 +484,7 @@ class GenVPD :
> def FixVpdOffset (self):
> # At first, the offset should start at 0
> # Sort fixed offset list in order to find out where has free spaces for the
> pcd's offset
> - # value is "*" to insert into.
> + # value is TAB_STAR to insert into.
>
> self.PcdFixedOffsetSizeList.sort(key=lambda x: x.PcdBinOffset)
>
> @@ -502,7 +502,7 @@ class GenVPD :
> self.PcdUnknownOffsetList[index+i -1 ],
> self.PcdUnknownOffsetList[index+i] = self.PcdUnknownOffsetList[index+i],
> self.PcdUnknownOffsetList[index+i -1]
>
> #
> - # Process all Offset value are "*"
> + # Process all Offset value are TAB_STAR
> #
> if (len(self.PcdFixedOffsetSizeList) == 0) and
> (len(self.PcdUnknownOffsetList) != 0) :
> # The offset start from 0
> @@ -571,7 +571,7 @@ class GenVPD :
> eachUnfixedPcd =
> self.PcdUnknownOffsetList[countOfUnfixedList]
> needFixPcdSize = eachUnfixedPcd.PcdOccupySize
> # Not been fixed
> - if eachUnfixedPcd.PcdOffset == '*' :
> + if eachUnfixedPcd.PcdOffset == TAB_STAR :
> if LastOffset % eachUnfixedPcd.Alignment != 0:
> LastOffset = (LastOffset / eachUnfixedPcd.Alignment + 1) *
> eachUnfixedPcd.Alignment
> # The offset un-fixed pcd can write into this free space
> diff --git a/BaseTools/Source/Python/Common/DataType.py
> b/BaseTools/Source/Python/Common/DataType.py
> index 1d1d22faa40b..6b375712b65e 100644
> --- a/BaseTools/Source/Python/Common/DataType.py
> +++ b/BaseTools/Source/Python/Common/DataType.py
> @@ -31,6 +31,7 @@ TAB_OPTION_START = '<'
> TAB_OPTION_END = '>'
> TAB_SLASH = '\\'
> TAB_BACK_SLASH = '/'
> +TAB_STAR = '*'
> TAB_LINE_BREAK = '\n'
> TAB_PRINTCHAR_VT = '\x0b'
> TAB_PRINTCHAR_BS = '\b'
> diff --git a/BaseTools/Source/Python/Common/Expression.py
> b/BaseTools/Source/Python/Common/Expression.py
> index a21ab5daa73e..db1310d534fb 100644
> --- a/BaseTools/Source/Python/Common/Expression.py
> +++ b/BaseTools/Source/Python/Common/Expression.py
> @@ -244,7 +244,7 @@ class ValueExpression(BaseExpression):
> 'IN' : 'in'
> }
>
> - NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>', '<',
> '?', ':']
> + NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=',
> '>', '<', '?', ':']
>
>
> SymbolPattern = re.compile("("
> @@ -498,7 +498,7 @@ class ValueExpression(BaseExpression):
>
> # A [ * B]*
> def _MulExpr(self):
> - return self._ExprFuncTemplate(self._UnaryExpr, {"*", "/", "%"})
> + return self._ExprFuncTemplate(self._UnaryExpr, {TAB_STAR, "/", "%"})
>
> # [!]*A
> def _UnaryExpr(self):
> diff --git a/BaseTools/Source/Python/Common/Misc.py
> b/BaseTools/Source/Python/Common/Misc.py
> index 3b8efb2e7179..61ba79241fb6 100644
> --- a/BaseTools/Source/Python/Common/Misc.py
> +++ b/BaseTools/Source/Python/Common/Misc.py
> @@ -1088,7 +1088,7 @@ class tdict:
> _ListType = type([])
> _TupleType = type(())
> _Wildcard = 'COMMON'
> - _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', '*', 'PLATFORM']
> + _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', TAB_STAR,
> 'PLATFORM']
>
> def __init__(self, _Single_=False, _Level_=2):
> self._Level_ = _Level_
> diff --git a/BaseTools/Source/Python/Common/ToolDefClassObject.py
> b/BaseTools/Source/Python/Common/ToolDefClassObject.py
> index 05a1ddfbcc89..186d279840c1 100644
> --- a/BaseTools/Source/Python/Common/ToolDefClassObject.py
> +++ b/BaseTools/Source/Python/Common/ToolDefClassObject.py
> @@ -29,7 +29,8 @@ from Common import GlobalData
> from Common.MultipleWorkspace import MultipleWorkspace as mws
> from .DataType import TAB_TOD_DEFINES_TARGET,
> TAB_TOD_DEFINES_TOOL_CHAIN_TAG,\
> TAB_TOD_DEFINES_TARGET_ARCH,
> TAB_TOD_DEFINES_COMMAND_TYPE\
> - , TAB_TOD_DEFINES_FAMILY,
> TAB_TOD_DEFINES_BUILDRULEFAMILY
> + , TAB_TOD_DEFINES_FAMILY,
> TAB_TOD_DEFINES_BUILDRULEFAMILY,\
> + TAB_STAR, TAB_TAT_DEFINES_TOOL_CHAIN_CONF
>
>
> ##
> @@ -97,7 +98,7 @@ class ToolDefClassObject(object):
> # adding/removing items from the original dict.
> for Key in list(self.ToolsDefTxtDictionary.keys()):
> List = Key.split('_')
> - if List[Index] == '*':
> + if List[Index] == TAB_STAR:
> for String in self.ToolsDefTxtDatabase[KeyList[Index]]:
> List[Index] = String
> NewKey = '%s_%s_%s_%s_%s' % tuple(List)
> @@ -202,20 +203,20 @@ class ToolDefClassObject(object):
> if len(List) != 5:
> EdkLogger.verbose("Line %d: Not a valid name of definition: %s" %
> ((Index + 1), Name))
> continue
> - elif List[4] == '*':
> + elif List[4] == TAB_STAR:
> EdkLogger.verbose("Line %d: '*' is not allowed in last field: %s" %
> ((Index + 1), Name))
> continue
> else:
> self.ToolsDefTxtDictionary[Name] = Value
> - if List[0] != '*':
> + if List[0] != TAB_STAR:
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET] +=
> [List[0]]
> - if List[1] != '*':
> + if List[1] != TAB_STAR:
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TOOL_CHAIN_TAG]
> += [List[1]]
> - if List[2] != '*':
> + if List[2] != TAB_STAR:
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET_ARCH] +=
> [List[2]]
> - if List[3] != '*':
> + if List[3] != TAB_STAR:
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_COMMAND_TYPE]
> += [List[3]]
> - if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] == '*' and List[3]
> == '*':
> + if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] == TAB_STAR
> and List[3] == TAB_STAR:
> if TAB_TOD_DEFINES_FAMILY not in self.ToolsDefTxtDatabase:
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY] = {}
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]] =
> Value
> @@ -226,7 +227,7 @@ class ToolDefClassObject(object):
>
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_BUILDRULEFAMILY][List[1]] =
> Value
> elif self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]]
> != Value:
> EdkLogger.verbose("Line %d: No override allowed for the family
> of a tool chain: %s" % ((Index + 1), Name))
> - if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and List[2] == '*'
> and List[3] == '*':
> + if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and List[2] ==
> TAB_STAR and List[3] == TAB_STAR:
> if TAB_TOD_DEFINES_BUILDRULEFAMILY not in
> self.ToolsDefTxtDatabase \
> or List[1] not in
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY]:
> EdkLogger.verbose("Line %d: The family is not specified, but
> BuildRuleFamily is specified for the tool chain: %s" % ((Index + 1), Name))
> @@ -270,8 +271,8 @@ class ToolDefClassObject(object):
> def ToolDefDict(ConfDir):
> Target = TargetTxtDict(ConfDir)
> ToolDef = ToolDefClassObject()
> - if DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CONF in
> Target.TargetTxtDictionary:
> - ToolsDefFile =
> Target.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CON
> F]
> + if TAB_TAT_DEFINES_TOOL_CHAIN_CONF in Target.TargetTxtDictionary:
> + ToolsDefFile =
> Target.TargetTxtDictionary[TAB_TAT_DEFINES_TOOL_CHAIN_CONF]
> if ToolsDefFile:
> ToolDef.LoadToolDefFile(os.path.normpath(ToolsDefFile))
> else:
> diff --git a/BaseTools/Source/Python/Common/VpdInfoFile.py
> b/BaseTools/Source/Python/Common/VpdInfoFile.py
> index 2fb8e66fe99c..3be0670e36fb 100644
> --- a/BaseTools/Source/Python/Common/VpdInfoFile.py
> +++ b/BaseTools/Source/Python/Common/VpdInfoFile.py
> @@ -57,7 +57,7 @@ FILE_COMMENT_TEMPLATE = \
> # <PcdName> ::= <TokenSpaceCName> "." <PcdCName>
> # <TokenSpaceCName> ::= C Variable Name of the Token Space GUID
> # <PcdCName> ::= C Variable Name of the PCD
> -# <Offset> ::= {"*"} {<HexNumber>}
> +# <Offset> ::= {TAB_STAR} {<HexNumber>}
> # <HexNumber> ::= "0x" (a-fA-F0-9){1,8}
> # <Size> ::= <HexNumber>
> # <Value> ::= {<HexNumber>} {<NonNegativeInt>} {<QString>}
> {<Array>}
> @@ -92,7 +92,7 @@ class VpdInfoFile:
> if (Vpd is None):
> EdkLogger.error("VpdInfoFile",
> BuildToolError.ATTRIBUTE_UNKNOWN_ERROR, "Invalid VPD PCD entry.")
>
> - if not (Offset >= 0 or Offset == "*"):
> + if not (Offset >= 0 or Offset == TAB_STAR):
> EdkLogger.error("VpdInfoFile", BuildToolError.PARAMETER_INVALID,
> "Invalid offset parameter: %s." % Offset)
>
> if Vpd.DatumType == TAB_VOID:
> @@ -186,8 +186,8 @@ class VpdInfoFile:
> VpdObjectTokenCName = PcdItem[0]
> for sku in VpdObject.SkuInfoList:
> if VpdObject.TokenSpaceGuidCName == TokenSpaceName and
> VpdObjectTokenCName == PcdTokenName.strip() and sku == SkuId:
> - if self._VpdArray[VpdObject][sku] == "*":
> - if Offset == "*":
> + if self._VpdArray[VpdObject][sku] == TAB_STAR:
> + if Offset == TAB_STAR:
> EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
> "The offset of %s has not been fixed up by third-party BPDG tool." %
> PcdName)
> self._VpdArray[VpdObject][sku] = Offset
> Found = True
> diff --git a/BaseTools/Source/Python/GenFds/FdfParser.py
> b/BaseTools/Source/Python/GenFds/FdfParser.py
> index 44cc8f63d07b..cedc4ea0c122 100644
> --- a/BaseTools/Source/Python/GenFds/FdfParser.py
> +++ b/BaseTools/Source/Python/GenFds/FdfParser.py
> @@ -64,7 +64,6 @@ T_CHAR_CR = '\r'
> T_CHAR_TAB = '\t'
> T_CHAR_DOUBLE_QUOTE = '\"'
> T_CHAR_SINGLE_QUOTE = '\''
> -T_CHAR_STAR = '*'
> T_CHAR_BRACE_R = '}'
>
> SEPARATORS = {TAB_EQUAL_SPLIT, TAB_VALUE_SPLIT,
> TAB_COMMA_SPLIT, '{', T_CHAR_BRACE_R}
> @@ -533,7 +532,7 @@ class FdfParser:
> InComment = False
> HashComment = False
> # check for */ comment end
> - elif InComment and not DoubleSlashComment and not HashComment
> and self._CurrentChar() == T_CHAR_STAR and self._NextChar() ==
> TAB_BACK_SLASH:
> + elif InComment and not DoubleSlashComment and not
> HashComment and self._CurrentChar() == TAB_STAR and self._NextChar()
> == TAB_BACK_SLASH:
> self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> self._GetOneChar()
> self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> @@ -552,7 +551,7 @@ class FdfParser:
> InComment = True
> HashComment = True
> # check for /* comment start
> - elif self._CurrentChar() == TAB_BACK_SLASH and self._NextChar() ==
> T_CHAR_STAR:
> + elif self._CurrentChar() == TAB_BACK_SLASH and self._NextChar() ==
> TAB_STAR:
> self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> self._GetOneChar()
> self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> diff --git a/BaseTools/Source/Python/GenFds/GenFds.py
> b/BaseTools/Source/Python/GenFds/GenFds.py
> index 0c8091b79841..0513f488fca3 100644
> --- a/BaseTools/Source/Python/GenFds/GenFds.py
> +++ b/BaseTools/Source/Python/GenFds/GenFds.py
> @@ -653,7 +653,7 @@ class GenFds(object):
> FileGuidList.append(FileStatementGuid)
> Name = []
> FfsPath = os.path.join(GenFdsGlobalVariable.FvDir, 'Ffs')
> - FfsPath = glob(os.path.join(FfsPath, FileStatementGuid) + '*')
> + FfsPath = glob(os.path.join(FfsPath, FileStatementGuid) +
> TAB_STAR)
> if not FfsPath:
> continue
> if not os.path.exists(FfsPath[0]):
> diff --git a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> index ea61f723a73c..0812c56bdae8 100644
> --- a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> +++ b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> @@ -217,12 +217,12 @@ class GenFdsGlobalVariable:
>
> if not Inf.IsBinaryModule:
> for File in Inf.Sources:
> - if File.TagName in {"", "*", GenFdsGlobalVariable.ToolChainTag} and
> \
> - File.ToolChainFamily in {"", "*",
> GenFdsGlobalVariable.ToolChainFamily}:
> + if File.TagName in {"", DataType.TAB_STAR,
> GenFdsGlobalVariable.ToolChainTag} and \
> + File.ToolChainFamily in {"", DataType.TAB_STAR,
> GenFdsGlobalVariable.ToolChainFamily}:
> FileList.append((File, DataType.TAB_UNKNOWN_FILE))
>
> for File in Inf.Binaries:
> - if File.Target in {DataType.TAB_COMMON, '*',
> GenFdsGlobalVariable.TargetName}:
> + if File.Target in {DataType.TAB_COMMON, DataType.TAB_STAR,
> GenFdsGlobalVariable.TargetName}:
> FileList.append((File, File.Type))
>
> for File, FileType in FileList:
> @@ -893,7 +893,7 @@ def FindExtendTool(KeyStringList, CurrentArchList,
> NameGuid):
> for Index in range(2, -1, -1):
> for Key in list(BuildOption.keys()):
> List = Key.split('_')
> - if List[Index] == '*':
> + if List[Index] == DataType.TAB_STAR:
> for String in ToolDb[ToolList[Index]]:
> if String in [Arch, GenFdsGlobalVariable.TargetName,
> GenFdsGlobalVariable.ToolChainTag]:
> List[Index] = String
> diff --git a/BaseTools/Source/Python/GenFds/Section.py
> b/BaseTools/Source/Python/GenFds/Section.py
> index 19a70009dcce..bab74aedf0b9 100644
> --- a/BaseTools/Source/Python/GenFds/Section.py
> +++ b/BaseTools/Source/Python/GenFds/Section.py
> @@ -131,7 +131,7 @@ class Section (SectionClassObject):
> if File.Type == FileType or (int(FfsInf.PiSpecVersion, 16) >=
> 0x0001000A \
> and FileType == 'DXE_DPEX' and File.Type ==
> BINARY_FILE_TYPE_SMM_DEPEX) \
> or (FileType == BINARY_FILE_TYPE_TE and File.Type
> == BINARY_FILE_TYPE_PE32):
> - if '*' in FfsInf.TargetOverrideList or File.Target == '*' or
> File.Target in FfsInf.TargetOverrideList or FfsInf.TargetOverrideList == []:
> + if TAB_STAR in FfsInf.TargetOverrideList or File.Target ==
> TAB_STAR or File.Target in FfsInf.TargetOverrideList or
> FfsInf.TargetOverrideList == []:
> FileList.append(FfsInf.PatchEfiFile(File.Path, File.Type))
> else:
> GenFdsGlobalVariable.InfLogger ("\nBuild Target \'%s\' of File
> %s is not in the Scope of %s specified by INF %s in FDF" %(File.Target,
> File.File, FfsInf.TargetOverrideList, FfsInf.InfFileName))
> diff --git a/BaseTools/Source/Python/Workspace/DscBuildData.py
> b/BaseTools/Source/Python/Workspace/DscBuildData.py
> index 11aa63fb263c..22cbbb119a5a 100644
> --- a/BaseTools/Source/Python/Workspace/DscBuildData.py
> +++ b/BaseTools/Source/Python/Workspace/DscBuildData.py
> @@ -2315,11 +2315,11 @@ class DscBuildData(PlatformBuildClassObject):
> continue
> if Attr != "FLAGS":
> continue
> - if Target == "*" or Target == self._Target:
> - if Tag == "*" or Tag == self._Toolchain:
> + if Target == TAB_STAR or Target == self._Target:
> + if Tag == TAB_STAR or Tag == self._Toolchain:
> if 'COMMON' not in BuildOptions:
> BuildOptions['COMMON'] = set()
> - if Arch == "*":
> + if Arch == TAB_STAR:
> BuildOptions['COMMON'].add(self.BuildOptions[Options])
> if Arch in self.SupArchList:
> if Arch not in BuildOptions:
> --
> 2.16.2.windows.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*'
2018-11-16 15:40 ` [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*' Jaben Carsey
2018-11-27 18:02 ` Carsey, Jaben
@ 2018-11-28 7:37 ` Feng, Bob C
2018-12-03 2:30 ` Zhu, Yonghong
2 siblings, 0 replies; 8+ messages in thread
From: Feng, Bob C @ 2018-11-28 7:37 UTC (permalink / raw)
To: Carsey, Jaben, edk2-devel@lists.01.org; +Cc: Gao, Liming
Reviewed-by : Bob Feng <bob.c.feng@intel.com>
-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Jaben Carsey
Sent: Friday, November 16, 2018 11:40 PM
To: edk2-devel@lists.01.org
Cc: Gao, Liming <liming.gao@intel.com>
Subject: [edk2] [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*'
add a variable for the string '*' and then use it instead of lots of '*'
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
---
BaseTools/Source/Python/AutoGen/AutoGen.py | 54 ++++++++++----------
BaseTools/Source/Python/AutoGen/BuildEngine.py | 10 ++--
BaseTools/Source/Python/BPDG/GenVpd.py | 14 ++---
BaseTools/Source/Python/Common/DataType.py | 1 +
BaseTools/Source/Python/Common/Expression.py | 4 +-
BaseTools/Source/Python/Common/Misc.py | 2 +-
BaseTools/Source/Python/Common/ToolDefClassObject.py | 23 +++++----
BaseTools/Source/Python/Common/VpdInfoFile.py | 8 +--
BaseTools/Source/Python/GenFds/FdfParser.py | 5 +-
BaseTools/Source/Python/GenFds/GenFds.py | 2 +-
BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py | 8 +--
BaseTools/Source/Python/GenFds/Section.py | 2 +-
BaseTools/Source/Python/Workspace/DscBuildData.py | 6 +--
13 files changed, 70 insertions(+), 69 deletions(-)
diff --git a/BaseTools/Source/Python/AutoGen/AutoGen.py b/BaseTools/Source/Python/AutoGen/AutoGen.py
index f3560bfc787d..25417c447061 100644
--- a/BaseTools/Source/Python/AutoGen/AutoGen.py
+++ b/BaseTools/Source/Python/AutoGen/AutoGen.py
@@ -1438,7 +1438,7 @@ class PlatformAutoGen(AutoGen):
PcdValue = Sku.DefaultValue
if PcdValue == "":
PcdValue = Pcd.DefaultValue
- if Sku.VpdOffset != '*':
+ if Sku.VpdOffset != TAB_STAR:
if PcdValue.startswith("{"):
Alignment = 8
elif PcdValue.startswith("L"):
@@ -1462,7 +1462,7 @@ class PlatformAutoGen(AutoGen):
VpdFile.Add(Pcd, SkuName, Sku.VpdOffset)
SkuValueMap[PcdValue].append(Sku)
# if the offset of a VPD is *, then it need to be fixed up by third party tool.
- if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
+ if not NeedProcessVpdMapFile and Sku.VpdOffset == TAB_STAR:
NeedProcessVpdMapFile = True
if self.Platform.VpdToolGuid is None or self.Platform.VpdToolGuid == '':
EdkLogger.error("Build", FILE_NOT_FOUND, \ @@ -1522,7 +1522,7 @@ class PlatformAutoGen(AutoGen):
PcdValue = Sku.DefaultValue
if PcdValue == "":
PcdValue = DscPcdEntry.DefaultValue
- if Sku.VpdOffset != '*':
+ if Sku.VpdOffset != TAB_STAR:
if PcdValue.startswith("{"):
Alignment = 8
elif PcdValue.startswith("L"):
@@ -1545,7 +1545,7 @@ class PlatformAutoGen(AutoGen):
SkuValueMap[PcdValue] = []
VpdFile.Add(DscPcdEntry, SkuName, Sku.VpdOffset)
SkuValueMap[PcdValue].append(Sku)
- if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
+ if not NeedProcessVpdMapFile and Sku.VpdOffset == TAB_STAR:
NeedProcessVpdMapFile = True
if DscPcdEntry.DatumType == TAB_VOID and PcdValue.startswith("L"):
UnicodePcdArray.add(DscPcdEntry) @@ -1573,7 +1573,7 @@ class PlatformAutoGen(AutoGen):
if os.path.exists(VpdMapFilePath):
VpdFile.Read(VpdMapFilePath)
- # Fixup "*" offset
+ # Fixup TAB_STAR offset
for pcd in VpdSkuMap:
vpdinfo = VpdFile.GetVpdInfo(pcd)
if vpdinfo is None:
@@ -2210,15 +2210,15 @@ class PlatformAutoGen(AutoGen):
def CalculatePriorityValue(self, Key):
Target, ToolChain, Arch, CommandType, Attr = Key.split('_')
PriorityValue = 0x11111
- if Target == "*":
+ if Target == TAB_STAR:
PriorityValue &= 0x01111
- if ToolChain == "*":
+ if ToolChain == TAB_STAR:
PriorityValue &= 0x10111
- if Arch == "*":
+ if Arch == TAB_STAR:
PriorityValue &= 0x11011
- if CommandType == "*":
+ if CommandType == TAB_STAR:
PriorityValue &= 0x11101
- if Attr == "*":
+ if Attr == TAB_STAR:
PriorityValue &= 0x11110
return self.PrioList["0x%0.5x" % PriorityValue] @@ -2253,9 +2253,9 @@ class PlatformAutoGen(AutoGen):
if (Key[0] == self.BuildRuleFamily and
(ModuleStyle is None or len(Key) < 3 or (len(Key) > 2 and Key[2] == ModuleStyle))):
Target, ToolChain, Arch, CommandType, Attr = Key[1].split('_')
- if (Target == self.BuildTarget or Target == "*") and\
- (ToolChain == self.ToolChain or ToolChain == "*") and\
- (Arch == self.Arch or Arch == "*") and\
+ if (Target == self.BuildTarget or Target == TAB_STAR) and\
+ (ToolChain == self.ToolChain or ToolChain == TAB_STAR) and\
+ (Arch == self.Arch or Arch == TAB_STAR) and\
Options[Key].startswith("="):
if OverrideList.get(Key[1]) is not None:
@@ -2276,11 +2276,11 @@ class PlatformAutoGen(AutoGen):
# Compare two Key, if one is included by another, choose the higher priority one
#
Target2, ToolChain2, Arch2, CommandType2, Attr2 = NextKey.split("_")
- if (Target1 == Target2 or Target1 == "*" or Target2 == "*") and\
- (ToolChain1 == ToolChain2 or ToolChain1 == "*" or ToolChain2 == "*") and\
- (Arch1 == Arch2 or Arch1 == "*" or Arch2 == "*") and\
- (CommandType1 == CommandType2 or CommandType1 == "*" or CommandType2 == "*") and\
- (Attr1 == Attr2 or Attr1 == "*" or Attr2 == "*"):
+ if (Target1 == Target2 or Target1 == TAB_STAR or Target2 == TAB_STAR) and\
+ (ToolChain1 == ToolChain2 or ToolChain1 == TAB_STAR or ToolChain2 == TAB_STAR) and\
+ (Arch1 == Arch2 or Arch1 == TAB_STAR or Arch2 == TAB_STAR) and\
+ (CommandType1 == CommandType2 or CommandType1 == TAB_STAR or CommandType2 == TAB_STAR) and\
+ (Attr1 == Attr2 or Attr1 == TAB_STAR or Attr2 == TAB_STAR):
if self.CalculatePriorityValue(NowKey) > self.CalculatePriorityValue(NextKey):
if Options.get((self.BuildRuleFamily, NextKey)) is not None:
@@ -2309,9 +2309,9 @@ class PlatformAutoGen(AutoGen):
continue
FamilyMatch = True
# expand any wildcard
- if Target == "*" or Target == self.BuildTarget:
- if Tag == "*" or Tag == self.ToolChain:
- if Arch == "*" or Arch == self.Arch:
+ if Target == TAB_STAR or Target == self.BuildTarget:
+ if Tag == TAB_STAR or Tag == self.ToolChain:
+ if Arch == TAB_STAR or Arch == self.Arch:
if Tool not in BuildOptions:
BuildOptions[Tool] = {}
if Attr != "FLAGS" or Attr not in BuildOptions[Tool] or Options[Key].startswith('='):
@@ -2344,9 +2344,9 @@ class PlatformAutoGen(AutoGen):
continue
# expand any wildcard
- if Target == "*" or Target == self.BuildTarget:
- if Tag == "*" or Tag == self.ToolChain:
- if Arch == "*" or Arch == self.Arch:
+ if Target == TAB_STAR or Target == self.BuildTarget:
+ if Tag == TAB_STAR or Tag == self.ToolChain:
+ if Arch == TAB_STAR or Arch == self.Arch:
if Tool not in BuildOptions:
BuildOptions[Tool] = {}
if Attr != "FLAGS" or Attr not in BuildOptions[Tool] or Options[Key].startswith('='):
@@ -2971,8 +2971,8 @@ class ModuleAutoGen(AutoGen):
@cached_property
def SourceFileList(self):
RetVal = []
- ToolChainTagSet = {"", "*", self.ToolChain}
- ToolChainFamilySet = {"", "*", self.ToolChainFamily, self.BuildRuleFamily}
+ ToolChainTagSet = {"", TAB_STAR, self.ToolChain}
+ ToolChainFamilySet = {"", TAB_STAR, self.ToolChainFamily,
+ self.BuildRuleFamily}
for F in self.Module.Sources:
# match tool chain
if F.TagName not in ToolChainTagSet:
@@ -3047,7 +3047,7 @@ class ModuleAutoGen(AutoGen):
def BinaryFileList(self):
RetVal = []
for F in self.Module.Binaries:
- if F.Target not in [TAB_ARCH_COMMON, '*'] and F.Target != self.BuildTarget:
+ if F.Target not in [TAB_ARCH_COMMON, TAB_STAR] and F.Target != self.BuildTarget:
continue
RetVal.append(F)
self._ApplyBuildRule(F, F.Type, BinaryFileList=RetVal) diff --git a/BaseTools/Source/Python/AutoGen/BuildEngine.py b/BaseTools/Source/Python/AutoGen/BuildEngine.py
index ac7a6687552c..f9e3ac3a1daf 100644
--- a/BaseTools/Source/Python/AutoGen/BuildEngine.py
+++ b/BaseTools/Source/Python/AutoGen/BuildEngine.py
@@ -110,7 +110,7 @@ class FileBuildRule:
self.IncListFileMacro = self.INC_LIST_MACRO
self.SourceFileType = Type
- # source files listed not in "*" or "?" pattern format
+ # source files listed not in TAB_STAR or "?" pattern format
if not ExtraDependency:
self.ExtraSourceFileList = []
else:
@@ -150,12 +150,12 @@ class FileBuildRule:
self.SourceFileExtList = set()
for File in Input:
Base, Ext = os.path.splitext(File)
- if Base.find("*") >= 0:
- # There's "*" in the file name
+ if Base.find(TAB_STAR) >= 0:
+ # There's TAB_STAR in the file name
self.IsMultipleInput = True
self.GenFileListMacro = True
elif Base.find("?") < 0:
- # There's no "*" and "?" in file name
+ # There's no TAB_STAR and "?" in file name
self.ExtraSourceFileList.append(File)
continue
self.SourceFileExtList.add(Ext) @@ -553,7 +553,7 @@ class BuildRule:
#
# @param FileExt The extension of a file
# @param ToolChainFamily The tool chain family name
- # @param BuildVersion The build version number. "*" means any rule
+ # @param BuildVersion The build version number. TAB_STAR means any rule
# is applicalbe.
#
# @retval FileType The file type string
diff --git a/BaseTools/Source/Python/BPDG/GenVpd.py b/BaseTools/Source/Python/BPDG/GenVpd.py
index d7852d29eed0..e5da47f95e63 100644
--- a/BaseTools/Source/Python/BPDG/GenVpd.py
+++ b/BaseTools/Source/Python/BPDG/GenVpd.py
@@ -21,7 +21,7 @@ import array
import re
from Common.LongFilePathSupport import OpenLongFilePath as open from struct import * -from Common.DataType import MAX_SIZE_TYPE, MAX_VAL_TYPE
+from Common.DataType import MAX_SIZE_TYPE, MAX_VAL_TYPE, TAB_STAR
import Common.EdkLogger as EdkLogger
import Common.BuildToolError as BuildToolError
@@ -87,7 +87,7 @@ class PcdEntry:
# for both hexadecimal and decimal.
#
def _GenOffsetValue(self):
- if self.PcdOffset != "*" :
+ if self.PcdOffset != TAB_STAR:
try:
self.PcdBinOffset = int (self.PcdOffset)
except:
@@ -423,7 +423,7 @@ class GenVPD :
Alignment = 1
PCD.Alignment = Alignment
- if PCD.PcdOffset != '*':
+ if PCD.PcdOffset != TAB_STAR:
if PCD.PcdOccupySize % Alignment != 0:
if PCD.PcdUnpackValue.startswith("{"):
EdkLogger.warn("BPDG", "The offset value of PCD %s is not 8-byte aligned!" %(PCD.PcdCName), File=self.InputFileName) @@ -469,7 +469,7 @@ class GenVPD :
def FormatFileLine (self) :
for eachPcd in self.FileLinesList :
- if eachPcd.PcdOffset != '*' :
+ if eachPcd.PcdOffset != TAB_STAR :
# Use pcd's Offset value as key, and pcd's Value as value
self.PcdFixedOffsetSizeList.append(eachPcd)
else :
@@ -484,7 +484,7 @@ class GenVPD :
def FixVpdOffset (self):
# At first, the offset should start at 0
# Sort fixed offset list in order to find out where has free spaces for the pcd's offset
- # value is "*" to insert into.
+ # value is TAB_STAR to insert into.
self.PcdFixedOffsetSizeList.sort(key=lambda x: x.PcdBinOffset)
@@ -502,7 +502,7 @@ class GenVPD :
self.PcdUnknownOffsetList[index+i -1 ], self.PcdUnknownOffsetList[index+i] = self.PcdUnknownOffsetList[index+i], self.PcdUnknownOffsetList[index+i -1]
#
- # Process all Offset value are "*"
+ # Process all Offset value are TAB_STAR
#
if (len(self.PcdFixedOffsetSizeList) == 0) and (len(self.PcdUnknownOffsetList) != 0) :
# The offset start from 0
@@ -571,7 +571,7 @@ class GenVPD :
eachUnfixedPcd = self.PcdUnknownOffsetList[countOfUnfixedList]
needFixPcdSize = eachUnfixedPcd.PcdOccupySize
# Not been fixed
- if eachUnfixedPcd.PcdOffset == '*' :
+ if eachUnfixedPcd.PcdOffset == TAB_STAR :
if LastOffset % eachUnfixedPcd.Alignment != 0:
LastOffset = (LastOffset / eachUnfixedPcd.Alignment + 1) * eachUnfixedPcd.Alignment
# The offset un-fixed pcd can write into this free space diff --git a/BaseTools/Source/Python/Common/DataType.py b/BaseTools/Source/Python/Common/DataType.py
index 1d1d22faa40b..6b375712b65e 100644
--- a/BaseTools/Source/Python/Common/DataType.py
+++ b/BaseTools/Source/Python/Common/DataType.py
@@ -31,6 +31,7 @@ TAB_OPTION_START = '<'
TAB_OPTION_END = '>'
TAB_SLASH = '\\'
TAB_BACK_SLASH = '/'
+TAB_STAR = '*'
TAB_LINE_BREAK = '\n'
TAB_PRINTCHAR_VT = '\x0b'
TAB_PRINTCHAR_BS = '\b'
diff --git a/BaseTools/Source/Python/Common/Expression.py b/BaseTools/Source/Python/Common/Expression.py
index a21ab5daa73e..db1310d534fb 100644
--- a/BaseTools/Source/Python/Common/Expression.py
+++ b/BaseTools/Source/Python/Common/Expression.py
@@ -244,7 +244,7 @@ class ValueExpression(BaseExpression):
'IN' : 'in'
}
- NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>', '<', '?', ':']
+ NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^', '~',
+ '<<', '>>', '!', '=', '>', '<', '?', ':']
SymbolPattern = re.compile("("
@@ -498,7 +498,7 @@ class ValueExpression(BaseExpression):
# A [ * B]*
def _MulExpr(self):
- return self._ExprFuncTemplate(self._UnaryExpr, {"*", "/", "%"})
+ return self._ExprFuncTemplate(self._UnaryExpr, {TAB_STAR, "/",
+ "%"})
# [!]*A
def _UnaryExpr(self):
diff --git a/BaseTools/Source/Python/Common/Misc.py b/BaseTools/Source/Python/Common/Misc.py
index 3b8efb2e7179..61ba79241fb6 100644
--- a/BaseTools/Source/Python/Common/Misc.py
+++ b/BaseTools/Source/Python/Common/Misc.py
@@ -1088,7 +1088,7 @@ class tdict:
_ListType = type([])
_TupleType = type(())
_Wildcard = 'COMMON'
- _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', '*', 'PLATFORM']
+ _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', TAB_STAR,
+ 'PLATFORM']
def __init__(self, _Single_=False, _Level_=2):
self._Level_ = _Level_
diff --git a/BaseTools/Source/Python/Common/ToolDefClassObject.py b/BaseTools/Source/Python/Common/ToolDefClassObject.py
index 05a1ddfbcc89..186d279840c1 100644
--- a/BaseTools/Source/Python/Common/ToolDefClassObject.py
+++ b/BaseTools/Source/Python/Common/ToolDefClassObject.py
@@ -29,7 +29,8 @@ from Common import GlobalData from Common.MultipleWorkspace import MultipleWorkspace as mws from .DataType import TAB_TOD_DEFINES_TARGET, TAB_TOD_DEFINES_TOOL_CHAIN_TAG,\
TAB_TOD_DEFINES_TARGET_ARCH, TAB_TOD_DEFINES_COMMAND_TYPE\
- , TAB_TOD_DEFINES_FAMILY, TAB_TOD_DEFINES_BUILDRULEFAMILY
+ , TAB_TOD_DEFINES_FAMILY, TAB_TOD_DEFINES_BUILDRULEFAMILY,\
+ TAB_STAR, TAB_TAT_DEFINES_TOOL_CHAIN_CONF
##
@@ -97,7 +98,7 @@ class ToolDefClassObject(object):
# adding/removing items from the original dict.
for Key in list(self.ToolsDefTxtDictionary.keys()):
List = Key.split('_')
- if List[Index] == '*':
+ if List[Index] == TAB_STAR:
for String in self.ToolsDefTxtDatabase[KeyList[Index]]:
List[Index] = String
NewKey = '%s_%s_%s_%s_%s' % tuple(List) @@ -202,20 +203,20 @@ class ToolDefClassObject(object):
if len(List) != 5:
EdkLogger.verbose("Line %d: Not a valid name of definition: %s" % ((Index + 1), Name))
continue
- elif List[4] == '*':
+ elif List[4] == TAB_STAR:
EdkLogger.verbose("Line %d: '*' is not allowed in last field: %s" % ((Index + 1), Name))
continue
else:
self.ToolsDefTxtDictionary[Name] = Value
- if List[0] != '*':
+ if List[0] != TAB_STAR:
self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET] += [List[0]]
- if List[1] != '*':
+ if List[1] != TAB_STAR:
self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TOOL_CHAIN_TAG] += [List[1]]
- if List[2] != '*':
+ if List[2] != TAB_STAR:
self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET_ARCH] += [List[2]]
- if List[3] != '*':
+ if List[3] != TAB_STAR:
self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_COMMAND_TYPE] += [List[3]]
- if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] == '*' and List[3] == '*':
+ if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] == TAB_STAR and List[3] == TAB_STAR:
if TAB_TOD_DEFINES_FAMILY not in self.ToolsDefTxtDatabase:
self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY] = {}
self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]] = Value @@ -226,7 +227,7 @@ class ToolDefClassObject(object):
self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_BUILDRULEFAMILY][List[1]] = Value
elif self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]] != Value:
EdkLogger.verbose("Line %d: No override allowed for the family of a tool chain: %s" % ((Index + 1), Name))
- if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and List[2] == '*' and List[3] == '*':
+ if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and List[2] == TAB_STAR and List[3] == TAB_STAR:
if TAB_TOD_DEFINES_BUILDRULEFAMILY not in self.ToolsDefTxtDatabase \
or List[1] not in self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY]:
EdkLogger.verbose("Line %d: The family is not specified, but BuildRuleFamily is specified for the tool chain: %s" % ((Index + 1), Name)) @@ -270,8 +271,8 @@ class ToolDefClassObject(object):
def ToolDefDict(ConfDir):
Target = TargetTxtDict(ConfDir)
ToolDef = ToolDefClassObject()
- if DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CONF in Target.TargetTxtDictionary:
- ToolsDefFile = Target.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CONF]
+ if TAB_TAT_DEFINES_TOOL_CHAIN_CONF in Target.TargetTxtDictionary:
+ ToolsDefFile =
+ Target.TargetTxtDictionary[TAB_TAT_DEFINES_TOOL_CHAIN_CONF]
if ToolsDefFile:
ToolDef.LoadToolDefFile(os.path.normpath(ToolsDefFile))
else:
diff --git a/BaseTools/Source/Python/Common/VpdInfoFile.py b/BaseTools/Source/Python/Common/VpdInfoFile.py
index 2fb8e66fe99c..3be0670e36fb 100644
--- a/BaseTools/Source/Python/Common/VpdInfoFile.py
+++ b/BaseTools/Source/Python/Common/VpdInfoFile.py
@@ -57,7 +57,7 @@ FILE_COMMENT_TEMPLATE = \
# <PcdName> ::= <TokenSpaceCName> "." <PcdCName>
# <TokenSpaceCName> ::= C Variable Name of the Token Space GUID
# <PcdCName> ::= C Variable Name of the PCD
-# <Offset> ::= {"*"} {<HexNumber>}
+# <Offset> ::= {TAB_STAR} {<HexNumber>}
# <HexNumber> ::= "0x" (a-fA-F0-9){1,8}
# <Size> ::= <HexNumber>
# <Value> ::= {<HexNumber>} {<NonNegativeInt>} {<QString>} {<Array>}
@@ -92,7 +92,7 @@ class VpdInfoFile:
if (Vpd is None):
EdkLogger.error("VpdInfoFile", BuildToolError.ATTRIBUTE_UNKNOWN_ERROR, "Invalid VPD PCD entry.")
- if not (Offset >= 0 or Offset == "*"):
+ if not (Offset >= 0 or Offset == TAB_STAR):
EdkLogger.error("VpdInfoFile", BuildToolError.PARAMETER_INVALID, "Invalid offset parameter: %s." % Offset)
if Vpd.DatumType == TAB_VOID:
@@ -186,8 +186,8 @@ class VpdInfoFile:
VpdObjectTokenCName = PcdItem[0]
for sku in VpdObject.SkuInfoList:
if VpdObject.TokenSpaceGuidCName == TokenSpaceName and VpdObjectTokenCName == PcdTokenName.strip() and sku == SkuId:
- if self._VpdArray[VpdObject][sku] == "*":
- if Offset == "*":
+ if self._VpdArray[VpdObject][sku] == TAB_STAR:
+ if Offset == TAB_STAR:
EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID, "The offset of %s has not been fixed up by third-party BPDG tool." % PcdName)
self._VpdArray[VpdObject][sku] = Offset
Found = True
diff --git a/BaseTools/Source/Python/GenFds/FdfParser.py b/BaseTools/Source/Python/GenFds/FdfParser.py
index 44cc8f63d07b..cedc4ea0c122 100644
--- a/BaseTools/Source/Python/GenFds/FdfParser.py
+++ b/BaseTools/Source/Python/GenFds/FdfParser.py
@@ -64,7 +64,6 @@ T_CHAR_CR = '\r'
T_CHAR_TAB = '\t'
T_CHAR_DOUBLE_QUOTE = '\"'
T_CHAR_SINGLE_QUOTE = '\''
-T_CHAR_STAR = '*'
T_CHAR_BRACE_R = '}'
SEPARATORS = {TAB_EQUAL_SPLIT, TAB_VALUE_SPLIT, TAB_COMMA_SPLIT, '{', T_CHAR_BRACE_R} @@ -533,7 +532,7 @@ class FdfParser:
InComment = False
HashComment = False
# check for */ comment end
- elif InComment and not DoubleSlashComment and not HashComment and self._CurrentChar() == T_CHAR_STAR and self._NextChar() == TAB_BACK_SLASH:
+ elif InComment and not DoubleSlashComment and not HashComment and self._CurrentChar() == TAB_STAR and self._NextChar() == TAB_BACK_SLASH:
self._SetCurrentCharValue(TAB_SPACE_SPLIT)
self._GetOneChar()
self._SetCurrentCharValue(TAB_SPACE_SPLIT)
@@ -552,7 +551,7 @@ class FdfParser:
InComment = True
HashComment = True
# check for /* comment start
- elif self._CurrentChar() == TAB_BACK_SLASH and self._NextChar() == T_CHAR_STAR:
+ elif self._CurrentChar() == TAB_BACK_SLASH and self._NextChar() == TAB_STAR:
self._SetCurrentCharValue(TAB_SPACE_SPLIT)
self._GetOneChar()
self._SetCurrentCharValue(TAB_SPACE_SPLIT)
diff --git a/BaseTools/Source/Python/GenFds/GenFds.py b/BaseTools/Source/Python/GenFds/GenFds.py
index 0c8091b79841..0513f488fca3 100644
--- a/BaseTools/Source/Python/GenFds/GenFds.py
+++ b/BaseTools/Source/Python/GenFds/GenFds.py
@@ -653,7 +653,7 @@ class GenFds(object):
FileGuidList.append(FileStatementGuid)
Name = []
FfsPath = os.path.join(GenFdsGlobalVariable.FvDir, 'Ffs')
- FfsPath = glob(os.path.join(FfsPath, FileStatementGuid) + '*')
+ FfsPath = glob(os.path.join(FfsPath,
+ FileStatementGuid) + TAB_STAR)
if not FfsPath:
continue
if not os.path.exists(FfsPath[0]):
diff --git a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
index ea61f723a73c..0812c56bdae8 100644
--- a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
+++ b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
@@ -217,12 +217,12 @@ class GenFdsGlobalVariable:
if not Inf.IsBinaryModule:
for File in Inf.Sources:
- if File.TagName in {"", "*", GenFdsGlobalVariable.ToolChainTag} and \
- File.ToolChainFamily in {"", "*", GenFdsGlobalVariable.ToolChainFamily}:
+ if File.TagName in {"", DataType.TAB_STAR, GenFdsGlobalVariable.ToolChainTag} and \
+ File.ToolChainFamily in {"", DataType.TAB_STAR, GenFdsGlobalVariable.ToolChainFamily}:
FileList.append((File, DataType.TAB_UNKNOWN_FILE))
for File in Inf.Binaries:
- if File.Target in {DataType.TAB_COMMON, '*', GenFdsGlobalVariable.TargetName}:
+ if File.Target in {DataType.TAB_COMMON, DataType.TAB_STAR, GenFdsGlobalVariable.TargetName}:
FileList.append((File, File.Type))
for File, FileType in FileList:
@@ -893,7 +893,7 @@ def FindExtendTool(KeyStringList, CurrentArchList, NameGuid):
for Index in range(2, -1, -1):
for Key in list(BuildOption.keys()):
List = Key.split('_')
- if List[Index] == '*':
+ if List[Index] == DataType.TAB_STAR:
for String in ToolDb[ToolList[Index]]:
if String in [Arch, GenFdsGlobalVariable.TargetName, GenFdsGlobalVariable.ToolChainTag]:
List[Index] = String diff --git a/BaseTools/Source/Python/GenFds/Section.py b/BaseTools/Source/Python/GenFds/Section.py
index 19a70009dcce..bab74aedf0b9 100644
--- a/BaseTools/Source/Python/GenFds/Section.py
+++ b/BaseTools/Source/Python/GenFds/Section.py
@@ -131,7 +131,7 @@ class Section (SectionClassObject):
if File.Type == FileType or (int(FfsInf.PiSpecVersion, 16) >= 0x0001000A \
and FileType == 'DXE_DPEX' and File.Type == BINARY_FILE_TYPE_SMM_DEPEX) \
or (FileType == BINARY_FILE_TYPE_TE and File.Type == BINARY_FILE_TYPE_PE32):
- if '*' in FfsInf.TargetOverrideList or File.Target == '*' or File.Target in FfsInf.TargetOverrideList or FfsInf.TargetOverrideList == []:
+ if TAB_STAR in FfsInf.TargetOverrideList or File.Target == TAB_STAR or File.Target in FfsInf.TargetOverrideList or FfsInf.TargetOverrideList == []:
FileList.append(FfsInf.PatchEfiFile(File.Path, File.Type))
else:
GenFdsGlobalVariable.InfLogger ("\nBuild Target \'%s\' of File %s is not in the Scope of %s specified by INF %s in FDF" %(File.Target, File.File, FfsInf.TargetOverrideList, FfsInf.InfFileName)) diff --git a/BaseTools/Source/Python/Workspace/DscBuildData.py b/BaseTools/Source/Python/Workspace/DscBuildData.py
index 11aa63fb263c..22cbbb119a5a 100644
--- a/BaseTools/Source/Python/Workspace/DscBuildData.py
+++ b/BaseTools/Source/Python/Workspace/DscBuildData.py
@@ -2315,11 +2315,11 @@ class DscBuildData(PlatformBuildClassObject):
continue
if Attr != "FLAGS":
continue
- if Target == "*" or Target == self._Target:
- if Tag == "*" or Tag == self._Toolchain:
+ if Target == TAB_STAR or Target == self._Target:
+ if Tag == TAB_STAR or Tag == self._Toolchain:
if 'COMMON' not in BuildOptions:
BuildOptions['COMMON'] = set()
- if Arch == "*":
+ if Arch == TAB_STAR:
BuildOptions['COMMON'].add(self.BuildOptions[Options])
if Arch in self.SupArchList:
if Arch not in BuildOptions:
--
2.16.2.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*'
2018-11-16 15:40 ` [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*' Jaben Carsey
2018-11-27 18:02 ` Carsey, Jaben
2018-11-28 7:37 ` Feng, Bob C
@ 2018-12-03 2:30 ` Zhu, Yonghong
2018-12-03 15:19 ` Carsey, Jaben
2 siblings, 1 reply; 8+ messages in thread
From: Zhu, Yonghong @ 2018-12-03 2:30 UTC (permalink / raw)
To: Carsey, Jaben, edk2-devel@lists.01.org; +Cc: Gao, Liming, Zhu, Yonghong
Hi Jaben,
In this patch, it also changed the mathematics multiplicative '*' (used in expression) to TAB_STAR, is it by on purpose?
Eg:
- NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>', '<', '?', ':']
+ NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>', '<', '?', ':']
Best Regards,
Zhu Yonghong
-----Original Message-----
From: Carsey, Jaben
Sent: Friday, November 16, 2018 11:40 PM
To: edk2-devel@lists.01.org
Cc: Zhu, Yonghong <yonghong.zhu@intel.com>; Gao, Liming <liming.gao@intel.com>
Subject: [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*'
add a variable for the string '*' and then use it instead of lots of '*'
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
---
BaseTools/Source/Python/AutoGen/AutoGen.py | 54 ++++++++++----------
BaseTools/Source/Python/AutoGen/BuildEngine.py | 10 ++--
BaseTools/Source/Python/BPDG/GenVpd.py | 14 ++---
BaseTools/Source/Python/Common/DataType.py | 1 +
BaseTools/Source/Python/Common/Expression.py | 4 +-
BaseTools/Source/Python/Common/Misc.py | 2 +-
BaseTools/Source/Python/Common/ToolDefClassObject.py | 23 +++++----
BaseTools/Source/Python/Common/VpdInfoFile.py | 8 +--
BaseTools/Source/Python/GenFds/FdfParser.py | 5 +-
BaseTools/Source/Python/GenFds/GenFds.py | 2 +-
BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py | 8 +--
BaseTools/Source/Python/GenFds/Section.py | 2 +-
BaseTools/Source/Python/Workspace/DscBuildData.py | 6 +--
13 files changed, 70 insertions(+), 69 deletions(-)
diff --git a/BaseTools/Source/Python/AutoGen/AutoGen.py b/BaseTools/Source/Python/AutoGen/AutoGen.py
index f3560bfc787d..25417c447061 100644
--- a/BaseTools/Source/Python/AutoGen/AutoGen.py
+++ b/BaseTools/Source/Python/AutoGen/AutoGen.py
@@ -1438,7 +1438,7 @@ class PlatformAutoGen(AutoGen):
PcdValue = Sku.DefaultValue
if PcdValue == "":
PcdValue = Pcd.DefaultValue
- if Sku.VpdOffset != '*':
+ if Sku.VpdOffset != TAB_STAR:
if PcdValue.startswith("{"):
Alignment = 8
elif PcdValue.startswith("L"):
@@ -1462,7 +1462,7 @@ class PlatformAutoGen(AutoGen):
VpdFile.Add(Pcd, SkuName, Sku.VpdOffset)
SkuValueMap[PcdValue].append(Sku)
# if the offset of a VPD is *, then it need to be fixed up by third party tool.
- if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
+ if not NeedProcessVpdMapFile and Sku.VpdOffset == TAB_STAR:
NeedProcessVpdMapFile = True
if self.Platform.VpdToolGuid is None or self.Platform.VpdToolGuid == '':
EdkLogger.error("Build", FILE_NOT_FOUND, \ @@ -1522,7 +1522,7 @@ class PlatformAutoGen(AutoGen):
PcdValue = Sku.DefaultValue
if PcdValue == "":
PcdValue = DscPcdEntry.DefaultValue
- if Sku.VpdOffset != '*':
+ if Sku.VpdOffset != TAB_STAR:
if PcdValue.startswith("{"):
Alignment = 8
elif PcdValue.startswith("L"):
@@ -1545,7 +1545,7 @@ class PlatformAutoGen(AutoGen):
SkuValueMap[PcdValue] = []
VpdFile.Add(DscPcdEntry, SkuName, Sku.VpdOffset)
SkuValueMap[PcdValue].append(Sku)
- if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
+ if not NeedProcessVpdMapFile and Sku.VpdOffset == TAB_STAR:
NeedProcessVpdMapFile = True
if DscPcdEntry.DatumType == TAB_VOID and PcdValue.startswith("L"):
UnicodePcdArray.add(DscPcdEntry) @@ -1573,7 +1573,7 @@ class PlatformAutoGen(AutoGen):
if os.path.exists(VpdMapFilePath):
VpdFile.Read(VpdMapFilePath)
- # Fixup "*" offset
+ # Fixup TAB_STAR offset
for pcd in VpdSkuMap:
vpdinfo = VpdFile.GetVpdInfo(pcd)
if vpdinfo is None:
@@ -2210,15 +2210,15 @@ class PlatformAutoGen(AutoGen):
def CalculatePriorityValue(self, Key):
Target, ToolChain, Arch, CommandType, Attr = Key.split('_')
PriorityValue = 0x11111
- if Target == "*":
+ if Target == TAB_STAR:
PriorityValue &= 0x01111
- if ToolChain == "*":
+ if ToolChain == TAB_STAR:
PriorityValue &= 0x10111
- if Arch == "*":
+ if Arch == TAB_STAR:
PriorityValue &= 0x11011
- if CommandType == "*":
+ if CommandType == TAB_STAR:
PriorityValue &= 0x11101
- if Attr == "*":
+ if Attr == TAB_STAR:
PriorityValue &= 0x11110
return self.PrioList["0x%0.5x" % PriorityValue] @@ -2253,9 +2253,9 @@ class PlatformAutoGen(AutoGen):
if (Key[0] == self.BuildRuleFamily and
(ModuleStyle is None or len(Key) < 3 or (len(Key) > 2 and Key[2] == ModuleStyle))):
Target, ToolChain, Arch, CommandType, Attr = Key[1].split('_')
- if (Target == self.BuildTarget or Target == "*") and\
- (ToolChain == self.ToolChain or ToolChain == "*") and\
- (Arch == self.Arch or Arch == "*") and\
+ if (Target == self.BuildTarget or Target == TAB_STAR) and\
+ (ToolChain == self.ToolChain or ToolChain == TAB_STAR) and\
+ (Arch == self.Arch or Arch == TAB_STAR) and\
Options[Key].startswith("="):
if OverrideList.get(Key[1]) is not None:
@@ -2276,11 +2276,11 @@ class PlatformAutoGen(AutoGen):
# Compare two Key, if one is included by another, choose the higher priority one
#
Target2, ToolChain2, Arch2, CommandType2, Attr2 = NextKey.split("_")
- if (Target1 == Target2 or Target1 == "*" or Target2 == "*") and\
- (ToolChain1 == ToolChain2 or ToolChain1 == "*" or ToolChain2 == "*") and\
- (Arch1 == Arch2 or Arch1 == "*" or Arch2 == "*") and\
- (CommandType1 == CommandType2 or CommandType1 == "*" or CommandType2 == "*") and\
- (Attr1 == Attr2 or Attr1 == "*" or Attr2 == "*"):
+ if (Target1 == Target2 or Target1 == TAB_STAR or Target2 == TAB_STAR) and\
+ (ToolChain1 == ToolChain2 or ToolChain1 == TAB_STAR or ToolChain2 == TAB_STAR) and\
+ (Arch1 == Arch2 or Arch1 == TAB_STAR or Arch2 == TAB_STAR) and\
+ (CommandType1 == CommandType2 or CommandType1 == TAB_STAR or CommandType2 == TAB_STAR) and\
+ (Attr1 == Attr2 or Attr1 == TAB_STAR or Attr2 == TAB_STAR):
if self.CalculatePriorityValue(NowKey) > self.CalculatePriorityValue(NextKey):
if Options.get((self.BuildRuleFamily, NextKey)) is not None:
@@ -2309,9 +2309,9 @@ class PlatformAutoGen(AutoGen):
continue
FamilyMatch = True
# expand any wildcard
- if Target == "*" or Target == self.BuildTarget:
- if Tag == "*" or Tag == self.ToolChain:
- if Arch == "*" or Arch == self.Arch:
+ if Target == TAB_STAR or Target == self.BuildTarget:
+ if Tag == TAB_STAR or Tag == self.ToolChain:
+ if Arch == TAB_STAR or Arch == self.Arch:
if Tool not in BuildOptions:
BuildOptions[Tool] = {}
if Attr != "FLAGS" or Attr not in BuildOptions[Tool] or Options[Key].startswith('='):
@@ -2344,9 +2344,9 @@ class PlatformAutoGen(AutoGen):
continue
# expand any wildcard
- if Target == "*" or Target == self.BuildTarget:
- if Tag == "*" or Tag == self.ToolChain:
- if Arch == "*" or Arch == self.Arch:
+ if Target == TAB_STAR or Target == self.BuildTarget:
+ if Tag == TAB_STAR or Tag == self.ToolChain:
+ if Arch == TAB_STAR or Arch == self.Arch:
if Tool not in BuildOptions:
BuildOptions[Tool] = {}
if Attr != "FLAGS" or Attr not in BuildOptions[Tool] or Options[Key].startswith('='):
@@ -2971,8 +2971,8 @@ class ModuleAutoGen(AutoGen):
@cached_property
def SourceFileList(self):
RetVal = []
- ToolChainTagSet = {"", "*", self.ToolChain}
- ToolChainFamilySet = {"", "*", self.ToolChainFamily, self.BuildRuleFamily}
+ ToolChainTagSet = {"", TAB_STAR, self.ToolChain}
+ ToolChainFamilySet = {"", TAB_STAR, self.ToolChainFamily,
+ self.BuildRuleFamily}
for F in self.Module.Sources:
# match tool chain
if F.TagName not in ToolChainTagSet:
@@ -3047,7 +3047,7 @@ class ModuleAutoGen(AutoGen):
def BinaryFileList(self):
RetVal = []
for F in self.Module.Binaries:
- if F.Target not in [TAB_ARCH_COMMON, '*'] and F.Target != self.BuildTarget:
+ if F.Target not in [TAB_ARCH_COMMON, TAB_STAR] and F.Target != self.BuildTarget:
continue
RetVal.append(F)
self._ApplyBuildRule(F, F.Type, BinaryFileList=RetVal) diff --git a/BaseTools/Source/Python/AutoGen/BuildEngine.py b/BaseTools/Source/Python/AutoGen/BuildEngine.py
index ac7a6687552c..f9e3ac3a1daf 100644
--- a/BaseTools/Source/Python/AutoGen/BuildEngine.py
+++ b/BaseTools/Source/Python/AutoGen/BuildEngine.py
@@ -110,7 +110,7 @@ class FileBuildRule:
self.IncListFileMacro = self.INC_LIST_MACRO
self.SourceFileType = Type
- # source files listed not in "*" or "?" pattern format
+ # source files listed not in TAB_STAR or "?" pattern format
if not ExtraDependency:
self.ExtraSourceFileList = []
else:
@@ -150,12 +150,12 @@ class FileBuildRule:
self.SourceFileExtList = set()
for File in Input:
Base, Ext = os.path.splitext(File)
- if Base.find("*") >= 0:
- # There's "*" in the file name
+ if Base.find(TAB_STAR) >= 0:
+ # There's TAB_STAR in the file name
self.IsMultipleInput = True
self.GenFileListMacro = True
elif Base.find("?") < 0:
- # There's no "*" and "?" in file name
+ # There's no TAB_STAR and "?" in file name
self.ExtraSourceFileList.append(File)
continue
self.SourceFileExtList.add(Ext) @@ -553,7 +553,7 @@ class BuildRule:
#
# @param FileExt The extension of a file
# @param ToolChainFamily The tool chain family name
- # @param BuildVersion The build version number. "*" means any rule
+ # @param BuildVersion The build version number. TAB_STAR means any rule
# is applicalbe.
#
# @retval FileType The file type string
diff --git a/BaseTools/Source/Python/BPDG/GenVpd.py b/BaseTools/Source/Python/BPDG/GenVpd.py
index d7852d29eed0..e5da47f95e63 100644
--- a/BaseTools/Source/Python/BPDG/GenVpd.py
+++ b/BaseTools/Source/Python/BPDG/GenVpd.py
@@ -21,7 +21,7 @@ import array
import re
from Common.LongFilePathSupport import OpenLongFilePath as open from struct import * -from Common.DataType import MAX_SIZE_TYPE, MAX_VAL_TYPE
+from Common.DataType import MAX_SIZE_TYPE, MAX_VAL_TYPE, TAB_STAR
import Common.EdkLogger as EdkLogger
import Common.BuildToolError as BuildToolError
@@ -87,7 +87,7 @@ class PcdEntry:
# for both hexadecimal and decimal.
#
def _GenOffsetValue(self):
- if self.PcdOffset != "*" :
+ if self.PcdOffset != TAB_STAR:
try:
self.PcdBinOffset = int (self.PcdOffset)
except:
@@ -423,7 +423,7 @@ class GenVPD :
Alignment = 1
PCD.Alignment = Alignment
- if PCD.PcdOffset != '*':
+ if PCD.PcdOffset != TAB_STAR:
if PCD.PcdOccupySize % Alignment != 0:
if PCD.PcdUnpackValue.startswith("{"):
EdkLogger.warn("BPDG", "The offset value of PCD %s is not 8-byte aligned!" %(PCD.PcdCName), File=self.InputFileName) @@ -469,7 +469,7 @@ class GenVPD :
def FormatFileLine (self) :
for eachPcd in self.FileLinesList :
- if eachPcd.PcdOffset != '*' :
+ if eachPcd.PcdOffset != TAB_STAR :
# Use pcd's Offset value as key, and pcd's Value as value
self.PcdFixedOffsetSizeList.append(eachPcd)
else :
@@ -484,7 +484,7 @@ class GenVPD :
def FixVpdOffset (self):
# At first, the offset should start at 0
# Sort fixed offset list in order to find out where has free spaces for the pcd's offset
- # value is "*" to insert into.
+ # value is TAB_STAR to insert into.
self.PcdFixedOffsetSizeList.sort(key=lambda x: x.PcdBinOffset)
@@ -502,7 +502,7 @@ class GenVPD :
self.PcdUnknownOffsetList[index+i -1 ], self.PcdUnknownOffsetList[index+i] = self.PcdUnknownOffsetList[index+i], self.PcdUnknownOffsetList[index+i -1]
#
- # Process all Offset value are "*"
+ # Process all Offset value are TAB_STAR
#
if (len(self.PcdFixedOffsetSizeList) == 0) and (len(self.PcdUnknownOffsetList) != 0) :
# The offset start from 0
@@ -571,7 +571,7 @@ class GenVPD :
eachUnfixedPcd = self.PcdUnknownOffsetList[countOfUnfixedList]
needFixPcdSize = eachUnfixedPcd.PcdOccupySize
# Not been fixed
- if eachUnfixedPcd.PcdOffset == '*' :
+ if eachUnfixedPcd.PcdOffset == TAB_STAR :
if LastOffset % eachUnfixedPcd.Alignment != 0:
LastOffset = (LastOffset / eachUnfixedPcd.Alignment + 1) * eachUnfixedPcd.Alignment
# The offset un-fixed pcd can write into this free space diff --git a/BaseTools/Source/Python/Common/DataType.py b/BaseTools/Source/Python/Common/DataType.py
index 1d1d22faa40b..6b375712b65e 100644
--- a/BaseTools/Source/Python/Common/DataType.py
+++ b/BaseTools/Source/Python/Common/DataType.py
@@ -31,6 +31,7 @@ TAB_OPTION_START = '<'
TAB_OPTION_END = '>'
TAB_SLASH = '\\'
TAB_BACK_SLASH = '/'
+TAB_STAR = '*'
TAB_LINE_BREAK = '\n'
TAB_PRINTCHAR_VT = '\x0b'
TAB_PRINTCHAR_BS = '\b'
diff --git a/BaseTools/Source/Python/Common/Expression.py b/BaseTools/Source/Python/Common/Expression.py
index a21ab5daa73e..db1310d534fb 100644
--- a/BaseTools/Source/Python/Common/Expression.py
+++ b/BaseTools/Source/Python/Common/Expression.py
@@ -244,7 +244,7 @@ class ValueExpression(BaseExpression):
'IN' : 'in'
}
- NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>', '<', '?', ':']
+ NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^', '~',
+ '<<', '>>', '!', '=', '>', '<', '?', ':']
SymbolPattern = re.compile("("
@@ -498,7 +498,7 @@ class ValueExpression(BaseExpression):
# A [ * B]*
def _MulExpr(self):
- return self._ExprFuncTemplate(self._UnaryExpr, {"*", "/", "%"})
+ return self._ExprFuncTemplate(self._UnaryExpr, {TAB_STAR, "/",
+ "%"})
# [!]*A
def _UnaryExpr(self):
diff --git a/BaseTools/Source/Python/Common/Misc.py b/BaseTools/Source/Python/Common/Misc.py
index 3b8efb2e7179..61ba79241fb6 100644
--- a/BaseTools/Source/Python/Common/Misc.py
+++ b/BaseTools/Source/Python/Common/Misc.py
@@ -1088,7 +1088,7 @@ class tdict:
_ListType = type([])
_TupleType = type(())
_Wildcard = 'COMMON'
- _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', '*', 'PLATFORM']
+ _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', TAB_STAR,
+ 'PLATFORM']
def __init__(self, _Single_=False, _Level_=2):
self._Level_ = _Level_
diff --git a/BaseTools/Source/Python/Common/ToolDefClassObject.py b/BaseTools/Source/Python/Common/ToolDefClassObject.py
index 05a1ddfbcc89..186d279840c1 100644
--- a/BaseTools/Source/Python/Common/ToolDefClassObject.py
+++ b/BaseTools/Source/Python/Common/ToolDefClassObject.py
@@ -29,7 +29,8 @@ from Common import GlobalData from Common.MultipleWorkspace import MultipleWorkspace as mws from .DataType import TAB_TOD_DEFINES_TARGET, TAB_TOD_DEFINES_TOOL_CHAIN_TAG,\
TAB_TOD_DEFINES_TARGET_ARCH, TAB_TOD_DEFINES_COMMAND_TYPE\
- , TAB_TOD_DEFINES_FAMILY, TAB_TOD_DEFINES_BUILDRULEFAMILY
+ , TAB_TOD_DEFINES_FAMILY, TAB_TOD_DEFINES_BUILDRULEFAMILY,\
+ TAB_STAR, TAB_TAT_DEFINES_TOOL_CHAIN_CONF
##
@@ -97,7 +98,7 @@ class ToolDefClassObject(object):
# adding/removing items from the original dict.
for Key in list(self.ToolsDefTxtDictionary.keys()):
List = Key.split('_')
- if List[Index] == '*':
+ if List[Index] == TAB_STAR:
for String in self.ToolsDefTxtDatabase[KeyList[Index]]:
List[Index] = String
NewKey = '%s_%s_%s_%s_%s' % tuple(List) @@ -202,20 +203,20 @@ class ToolDefClassObject(object):
if len(List) != 5:
EdkLogger.verbose("Line %d: Not a valid name of definition: %s" % ((Index + 1), Name))
continue
- elif List[4] == '*':
+ elif List[4] == TAB_STAR:
EdkLogger.verbose("Line %d: '*' is not allowed in last field: %s" % ((Index + 1), Name))
continue
else:
self.ToolsDefTxtDictionary[Name] = Value
- if List[0] != '*':
+ if List[0] != TAB_STAR:
self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET] += [List[0]]
- if List[1] != '*':
+ if List[1] != TAB_STAR:
self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TOOL_CHAIN_TAG] += [List[1]]
- if List[2] != '*':
+ if List[2] != TAB_STAR:
self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET_ARCH] += [List[2]]
- if List[3] != '*':
+ if List[3] != TAB_STAR:
self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_COMMAND_TYPE] += [List[3]]
- if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] == '*' and List[3] == '*':
+ if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] == TAB_STAR and List[3] == TAB_STAR:
if TAB_TOD_DEFINES_FAMILY not in self.ToolsDefTxtDatabase:
self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY] = {}
self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]] = Value @@ -226,7 +227,7 @@ class ToolDefClassObject(object):
self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_BUILDRULEFAMILY][List[1]] = Value
elif self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]] != Value:
EdkLogger.verbose("Line %d: No override allowed for the family of a tool chain: %s" % ((Index + 1), Name))
- if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and List[2] == '*' and List[3] == '*':
+ if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and List[2] == TAB_STAR and List[3] == TAB_STAR:
if TAB_TOD_DEFINES_BUILDRULEFAMILY not in self.ToolsDefTxtDatabase \
or List[1] not in self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY]:
EdkLogger.verbose("Line %d: The family is not specified, but BuildRuleFamily is specified for the tool chain: %s" % ((Index + 1), Name)) @@ -270,8 +271,8 @@ class ToolDefClassObject(object):
def ToolDefDict(ConfDir):
Target = TargetTxtDict(ConfDir)
ToolDef = ToolDefClassObject()
- if DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CONF in Target.TargetTxtDictionary:
- ToolsDefFile = Target.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CONF]
+ if TAB_TAT_DEFINES_TOOL_CHAIN_CONF in Target.TargetTxtDictionary:
+ ToolsDefFile =
+ Target.TargetTxtDictionary[TAB_TAT_DEFINES_TOOL_CHAIN_CONF]
if ToolsDefFile:
ToolDef.LoadToolDefFile(os.path.normpath(ToolsDefFile))
else:
diff --git a/BaseTools/Source/Python/Common/VpdInfoFile.py b/BaseTools/Source/Python/Common/VpdInfoFile.py
index 2fb8e66fe99c..3be0670e36fb 100644
--- a/BaseTools/Source/Python/Common/VpdInfoFile.py
+++ b/BaseTools/Source/Python/Common/VpdInfoFile.py
@@ -57,7 +57,7 @@ FILE_COMMENT_TEMPLATE = \
# <PcdName> ::= <TokenSpaceCName> "." <PcdCName>
# <TokenSpaceCName> ::= C Variable Name of the Token Space GUID
# <PcdCName> ::= C Variable Name of the PCD
-# <Offset> ::= {"*"} {<HexNumber>}
+# <Offset> ::= {TAB_STAR} {<HexNumber>}
# <HexNumber> ::= "0x" (a-fA-F0-9){1,8}
# <Size> ::= <HexNumber>
# <Value> ::= {<HexNumber>} {<NonNegativeInt>} {<QString>} {<Array>}
@@ -92,7 +92,7 @@ class VpdInfoFile:
if (Vpd is None):
EdkLogger.error("VpdInfoFile", BuildToolError.ATTRIBUTE_UNKNOWN_ERROR, "Invalid VPD PCD entry.")
- if not (Offset >= 0 or Offset == "*"):
+ if not (Offset >= 0 or Offset == TAB_STAR):
EdkLogger.error("VpdInfoFile", BuildToolError.PARAMETER_INVALID, "Invalid offset parameter: %s." % Offset)
if Vpd.DatumType == TAB_VOID:
@@ -186,8 +186,8 @@ class VpdInfoFile:
VpdObjectTokenCName = PcdItem[0]
for sku in VpdObject.SkuInfoList:
if VpdObject.TokenSpaceGuidCName == TokenSpaceName and VpdObjectTokenCName == PcdTokenName.strip() and sku == SkuId:
- if self._VpdArray[VpdObject][sku] == "*":
- if Offset == "*":
+ if self._VpdArray[VpdObject][sku] == TAB_STAR:
+ if Offset == TAB_STAR:
EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID, "The offset of %s has not been fixed up by third-party BPDG tool." % PcdName)
self._VpdArray[VpdObject][sku] = Offset
Found = True
diff --git a/BaseTools/Source/Python/GenFds/FdfParser.py b/BaseTools/Source/Python/GenFds/FdfParser.py
index 44cc8f63d07b..cedc4ea0c122 100644
--- a/BaseTools/Source/Python/GenFds/FdfParser.py
+++ b/BaseTools/Source/Python/GenFds/FdfParser.py
@@ -64,7 +64,6 @@ T_CHAR_CR = '\r'
T_CHAR_TAB = '\t'
T_CHAR_DOUBLE_QUOTE = '\"'
T_CHAR_SINGLE_QUOTE = '\''
-T_CHAR_STAR = '*'
T_CHAR_BRACE_R = '}'
SEPARATORS = {TAB_EQUAL_SPLIT, TAB_VALUE_SPLIT, TAB_COMMA_SPLIT, '{', T_CHAR_BRACE_R} @@ -533,7 +532,7 @@ class FdfParser:
InComment = False
HashComment = False
# check for */ comment end
- elif InComment and not DoubleSlashComment and not HashComment and self._CurrentChar() == T_CHAR_STAR and self._NextChar() == TAB_BACK_SLASH:
+ elif InComment and not DoubleSlashComment and not HashComment and self._CurrentChar() == TAB_STAR and self._NextChar() == TAB_BACK_SLASH:
self._SetCurrentCharValue(TAB_SPACE_SPLIT)
self._GetOneChar()
self._SetCurrentCharValue(TAB_SPACE_SPLIT)
@@ -552,7 +551,7 @@ class FdfParser:
InComment = True
HashComment = True
# check for /* comment start
- elif self._CurrentChar() == TAB_BACK_SLASH and self._NextChar() == T_CHAR_STAR:
+ elif self._CurrentChar() == TAB_BACK_SLASH and self._NextChar() == TAB_STAR:
self._SetCurrentCharValue(TAB_SPACE_SPLIT)
self._GetOneChar()
self._SetCurrentCharValue(TAB_SPACE_SPLIT)
diff --git a/BaseTools/Source/Python/GenFds/GenFds.py b/BaseTools/Source/Python/GenFds/GenFds.py
index 0c8091b79841..0513f488fca3 100644
--- a/BaseTools/Source/Python/GenFds/GenFds.py
+++ b/BaseTools/Source/Python/GenFds/GenFds.py
@@ -653,7 +653,7 @@ class GenFds(object):
FileGuidList.append(FileStatementGuid)
Name = []
FfsPath = os.path.join(GenFdsGlobalVariable.FvDir, 'Ffs')
- FfsPath = glob(os.path.join(FfsPath, FileStatementGuid) + '*')
+ FfsPath = glob(os.path.join(FfsPath,
+ FileStatementGuid) + TAB_STAR)
if not FfsPath:
continue
if not os.path.exists(FfsPath[0]):
diff --git a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
index ea61f723a73c..0812c56bdae8 100644
--- a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
+++ b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
@@ -217,12 +217,12 @@ class GenFdsGlobalVariable:
if not Inf.IsBinaryModule:
for File in Inf.Sources:
- if File.TagName in {"", "*", GenFdsGlobalVariable.ToolChainTag} and \
- File.ToolChainFamily in {"", "*", GenFdsGlobalVariable.ToolChainFamily}:
+ if File.TagName in {"", DataType.TAB_STAR, GenFdsGlobalVariable.ToolChainTag} and \
+ File.ToolChainFamily in {"", DataType.TAB_STAR, GenFdsGlobalVariable.ToolChainFamily}:
FileList.append((File, DataType.TAB_UNKNOWN_FILE))
for File in Inf.Binaries:
- if File.Target in {DataType.TAB_COMMON, '*', GenFdsGlobalVariable.TargetName}:
+ if File.Target in {DataType.TAB_COMMON, DataType.TAB_STAR, GenFdsGlobalVariable.TargetName}:
FileList.append((File, File.Type))
for File, FileType in FileList:
@@ -893,7 +893,7 @@ def FindExtendTool(KeyStringList, CurrentArchList, NameGuid):
for Index in range(2, -1, -1):
for Key in list(BuildOption.keys()):
List = Key.split('_')
- if List[Index] == '*':
+ if List[Index] == DataType.TAB_STAR:
for String in ToolDb[ToolList[Index]]:
if String in [Arch, GenFdsGlobalVariable.TargetName, GenFdsGlobalVariable.ToolChainTag]:
List[Index] = String diff --git a/BaseTools/Source/Python/GenFds/Section.py b/BaseTools/Source/Python/GenFds/Section.py
index 19a70009dcce..bab74aedf0b9 100644
--- a/BaseTools/Source/Python/GenFds/Section.py
+++ b/BaseTools/Source/Python/GenFds/Section.py
@@ -131,7 +131,7 @@ class Section (SectionClassObject):
if File.Type == FileType or (int(FfsInf.PiSpecVersion, 16) >= 0x0001000A \
and FileType == 'DXE_DPEX' and File.Type == BINARY_FILE_TYPE_SMM_DEPEX) \
or (FileType == BINARY_FILE_TYPE_TE and File.Type == BINARY_FILE_TYPE_PE32):
- if '*' in FfsInf.TargetOverrideList or File.Target == '*' or File.Target in FfsInf.TargetOverrideList or FfsInf.TargetOverrideList == []:
+ if TAB_STAR in FfsInf.TargetOverrideList or File.Target == TAB_STAR or File.Target in FfsInf.TargetOverrideList or FfsInf.TargetOverrideList == []:
FileList.append(FfsInf.PatchEfiFile(File.Path, File.Type))
else:
GenFdsGlobalVariable.InfLogger ("\nBuild Target \'%s\' of File %s is not in the Scope of %s specified by INF %s in FDF" %(File.Target, File.File, FfsInf.TargetOverrideList, FfsInf.InfFileName)) diff --git a/BaseTools/Source/Python/Workspace/DscBuildData.py b/BaseTools/Source/Python/Workspace/DscBuildData.py
index 11aa63fb263c..22cbbb119a5a 100644
--- a/BaseTools/Source/Python/Workspace/DscBuildData.py
+++ b/BaseTools/Source/Python/Workspace/DscBuildData.py
@@ -2315,11 +2315,11 @@ class DscBuildData(PlatformBuildClassObject):
continue
if Attr != "FLAGS":
continue
- if Target == "*" or Target == self._Target:
- if Tag == "*" or Tag == self._Toolchain:
+ if Target == TAB_STAR or Target == self._Target:
+ if Tag == TAB_STAR or Tag == self._Toolchain:
if 'COMMON' not in BuildOptions:
BuildOptions['COMMON'] = set()
- if Arch == "*":
+ if Arch == TAB_STAR:
BuildOptions['COMMON'].add(self.BuildOptions[Options])
if Arch in self.SupArchList:
if Arch not in BuildOptions:
--
2.16.2.windows.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*'
2018-12-03 2:30 ` Zhu, Yonghong
@ 2018-12-03 15:19 ` Carsey, Jaben
2018-12-04 1:52 ` Zhu, Yonghong
0 siblings, 1 reply; 8+ messages in thread
From: Carsey, Jaben @ 2018-12-03 15:19 UTC (permalink / raw)
To: Zhu, Yonghong, edk2-devel@lists.01.org; +Cc: Gao, Liming
I was trying to change all use of *, without regard to the usage of it.
Do you think that mathematical * should not be changed?
-Jaben
> -----Original Message-----
> From: Zhu, Yonghong
> Sent: Sunday, December 02, 2018 6:31 PM
> To: Carsey, Jaben <jaben.carsey@intel.com>; edk2-devel@lists.01.org
> Cc: Gao, Liming <liming.gao@intel.com>; Zhu, Yonghong
> <yonghong.zhu@intel.com>
> Subject: RE: [Patch v1 1/1] BaseTools: create and use a standard shared
> variable for '*'
> Importance: High
>
> Hi Jaben,
>
> In this patch, it also changed the mathematics multiplicative '*' (used in
> expression) to TAB_STAR, is it by on purpose?
> Eg:
> - NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>', '<',
> '?', ':']
> + NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=',
> '>', '<', '?', ':']
>
> Best Regards,
> Zhu Yonghong
>
> -----Original Message-----
> From: Carsey, Jaben
> Sent: Friday, November 16, 2018 11:40 PM
> To: edk2-devel@lists.01.org
> Cc: Zhu, Yonghong <yonghong.zhu@intel.com>; Gao, Liming
> <liming.gao@intel.com>
> Subject: [Patch v1 1/1] BaseTools: create and use a standard shared variable
> for '*'
>
> add a variable for the string '*' and then use it instead of lots of '*'
>
> Cc: Yonghong Zhu <yonghong.zhu@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
> ---
> BaseTools/Source/Python/AutoGen/AutoGen.py | 54 ++++++++++---
> -------
> BaseTools/Source/Python/AutoGen/BuildEngine.py | 10 ++--
> BaseTools/Source/Python/BPDG/GenVpd.py | 14 ++---
> BaseTools/Source/Python/Common/DataType.py | 1 +
> BaseTools/Source/Python/Common/Expression.py | 4 +-
> BaseTools/Source/Python/Common/Misc.py | 2 +-
> BaseTools/Source/Python/Common/ToolDefClassObject.py | 23 +++++----
> BaseTools/Source/Python/Common/VpdInfoFile.py | 8 +--
> BaseTools/Source/Python/GenFds/FdfParser.py | 5 +-
> BaseTools/Source/Python/GenFds/GenFds.py | 2 +-
> BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py | 8 +--
> BaseTools/Source/Python/GenFds/Section.py | 2 +-
> BaseTools/Source/Python/Workspace/DscBuildData.py | 6 +--
> 13 files changed, 70 insertions(+), 69 deletions(-)
>
> diff --git a/BaseTools/Source/Python/AutoGen/AutoGen.py
> b/BaseTools/Source/Python/AutoGen/AutoGen.py
> index f3560bfc787d..25417c447061 100644
> --- a/BaseTools/Source/Python/AutoGen/AutoGen.py
> +++ b/BaseTools/Source/Python/AutoGen/AutoGen.py
> @@ -1438,7 +1438,7 @@ class PlatformAutoGen(AutoGen):
> PcdValue = Sku.DefaultValue
> if PcdValue == "":
> PcdValue = Pcd.DefaultValue
> - if Sku.VpdOffset != '*':
> + if Sku.VpdOffset != TAB_STAR:
> if PcdValue.startswith("{"):
> Alignment = 8
> elif PcdValue.startswith("L"):
> @@ -1462,7 +1462,7 @@ class PlatformAutoGen(AutoGen):
> VpdFile.Add(Pcd, SkuName, Sku.VpdOffset)
> SkuValueMap[PcdValue].append(Sku)
> # if the offset of a VPD is *, then it need to be fixed up by third
> party tool.
> - if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
> + if not NeedProcessVpdMapFile and Sku.VpdOffset ==
> TAB_STAR:
> NeedProcessVpdMapFile = True
> if self.Platform.VpdToolGuid is None or
> self.Platform.VpdToolGuid == '':
> EdkLogger.error("Build", FILE_NOT_FOUND, \ @@ -1522,7
> +1522,7 @@ class PlatformAutoGen(AutoGen):
> PcdValue = Sku.DefaultValue
> if PcdValue == "":
> PcdValue = DscPcdEntry.DefaultValue
> - if Sku.VpdOffset != '*':
> + if Sku.VpdOffset != TAB_STAR:
> if PcdValue.startswith("{"):
> Alignment = 8
> elif PcdValue.startswith("L"):
> @@ -1545,7 +1545,7 @@ class PlatformAutoGen(AutoGen):
> SkuValueMap[PcdValue] = []
> VpdFile.Add(DscPcdEntry, SkuName, Sku.VpdOffset)
> SkuValueMap[PcdValue].append(Sku)
> - if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
> + if not NeedProcessVpdMapFile and Sku.VpdOffset ==
> TAB_STAR:
> NeedProcessVpdMapFile = True
> if DscPcdEntry.DatumType == TAB_VOID and
> PcdValue.startswith("L"):
> UnicodePcdArray.add(DscPcdEntry) @@ -1573,7 +1573,7
> @@ class PlatformAutoGen(AutoGen):
> if os.path.exists(VpdMapFilePath):
> VpdFile.Read(VpdMapFilePath)
>
> - # Fixup "*" offset
> + # Fixup TAB_STAR offset
> for pcd in VpdSkuMap:
> vpdinfo = VpdFile.GetVpdInfo(pcd)
> if vpdinfo is None:
> @@ -2210,15 +2210,15 @@ class PlatformAutoGen(AutoGen):
> def CalculatePriorityValue(self, Key):
> Target, ToolChain, Arch, CommandType, Attr = Key.split('_')
> PriorityValue = 0x11111
> - if Target == "*":
> + if Target == TAB_STAR:
> PriorityValue &= 0x01111
> - if ToolChain == "*":
> + if ToolChain == TAB_STAR:
> PriorityValue &= 0x10111
> - if Arch == "*":
> + if Arch == TAB_STAR:
> PriorityValue &= 0x11011
> - if CommandType == "*":
> + if CommandType == TAB_STAR:
> PriorityValue &= 0x11101
> - if Attr == "*":
> + if Attr == TAB_STAR:
> PriorityValue &= 0x11110
>
> return self.PrioList["0x%0.5x" % PriorityValue] @@ -2253,9 +2253,9 @@
> class PlatformAutoGen(AutoGen):
> if (Key[0] == self.BuildRuleFamily and
> (ModuleStyle is None or len(Key) < 3 or (len(Key) > 2 and Key[2] ==
> ModuleStyle))):
> Target, ToolChain, Arch, CommandType, Attr = Key[1].split('_')
> - if (Target == self.BuildTarget or Target == "*") and\
> - (ToolChain == self.ToolChain or ToolChain == "*") and\
> - (Arch == self.Arch or Arch == "*") and\
> + if (Target == self.BuildTarget or Target == TAB_STAR) and\
> + (ToolChain == self.ToolChain or ToolChain == TAB_STAR) and\
> + (Arch == self.Arch or Arch == TAB_STAR) and\
> Options[Key].startswith("="):
>
> if OverrideList.get(Key[1]) is not None:
> @@ -2276,11 +2276,11 @@ class PlatformAutoGen(AutoGen):
> # Compare two Key, if one is included by another, choose the
> higher priority one
> #
> Target2, ToolChain2, Arch2, CommandType2, Attr2 =
> NextKey.split("_")
> - if (Target1 == Target2 or Target1 == "*" or Target2 == "*") and\
> - (ToolChain1 == ToolChain2 or ToolChain1 == "*" or ToolChain2
> == "*") and\
> - (Arch1 == Arch2 or Arch1 == "*" or Arch2 == "*") and\
> - (CommandType1 == CommandType2 or CommandType1 == "*"
> or CommandType2 == "*") and\
> - (Attr1 == Attr2 or Attr1 == "*" or Attr2 == "*"):
> + if (Target1 == Target2 or Target1 == TAB_STAR or Target2 ==
> TAB_STAR) and\
> + (ToolChain1 == ToolChain2 or ToolChain1 == TAB_STAR or
> ToolChain2 == TAB_STAR) and\
> + (Arch1 == Arch2 or Arch1 == TAB_STAR or Arch2 == TAB_STAR)
> and\
> + (CommandType1 == CommandType2 or CommandType1 ==
> TAB_STAR or CommandType2 == TAB_STAR) and\
> + (Attr1 == Attr2 or Attr1 == TAB_STAR or Attr2 == TAB_STAR):
>
> if self.CalculatePriorityValue(NowKey) >
> self.CalculatePriorityValue(NextKey):
> if Options.get((self.BuildRuleFamily, NextKey)) is not None:
> @@ -2309,9 +2309,9 @@ class PlatformAutoGen(AutoGen):
> continue
> FamilyMatch = True
> # expand any wildcard
> - if Target == "*" or Target == self.BuildTarget:
> - if Tag == "*" or Tag == self.ToolChain:
> - if Arch == "*" or Arch == self.Arch:
> + if Target == TAB_STAR or Target == self.BuildTarget:
> + if Tag == TAB_STAR or Tag == self.ToolChain:
> + if Arch == TAB_STAR or Arch == self.Arch:
> if Tool not in BuildOptions:
> BuildOptions[Tool] = {}
> if Attr != "FLAGS" or Attr not in BuildOptions[Tool] or
> Options[Key].startswith('='):
> @@ -2344,9 +2344,9 @@ class PlatformAutoGen(AutoGen):
> continue
>
> # expand any wildcard
> - if Target == "*" or Target == self.BuildTarget:
> - if Tag == "*" or Tag == self.ToolChain:
> - if Arch == "*" or Arch == self.Arch:
> + if Target == TAB_STAR or Target == self.BuildTarget:
> + if Tag == TAB_STAR or Tag == self.ToolChain:
> + if Arch == TAB_STAR or Arch == self.Arch:
> if Tool not in BuildOptions:
> BuildOptions[Tool] = {}
> if Attr != "FLAGS" or Attr not in BuildOptions[Tool] or
> Options[Key].startswith('='):
> @@ -2971,8 +2971,8 @@ class ModuleAutoGen(AutoGen):
> @cached_property
> def SourceFileList(self):
> RetVal = []
> - ToolChainTagSet = {"", "*", self.ToolChain}
> - ToolChainFamilySet = {"", "*", self.ToolChainFamily,
> self.BuildRuleFamily}
> + ToolChainTagSet = {"", TAB_STAR, self.ToolChain}
> + ToolChainFamilySet = {"", TAB_STAR, self.ToolChainFamily,
> + self.BuildRuleFamily}
> for F in self.Module.Sources:
> # match tool chain
> if F.TagName not in ToolChainTagSet:
> @@ -3047,7 +3047,7 @@ class ModuleAutoGen(AutoGen):
> def BinaryFileList(self):
> RetVal = []
> for F in self.Module.Binaries:
> - if F.Target not in [TAB_ARCH_COMMON, '*'] and F.Target !=
> self.BuildTarget:
> + if F.Target not in [TAB_ARCH_COMMON, TAB_STAR] and F.Target !=
> self.BuildTarget:
> continue
> RetVal.append(F)
> self._ApplyBuildRule(F, F.Type, BinaryFileList=RetVal) diff --git
> a/BaseTools/Source/Python/AutoGen/BuildEngine.py
> b/BaseTools/Source/Python/AutoGen/BuildEngine.py
> index ac7a6687552c..f9e3ac3a1daf 100644
> --- a/BaseTools/Source/Python/AutoGen/BuildEngine.py
> +++ b/BaseTools/Source/Python/AutoGen/BuildEngine.py
> @@ -110,7 +110,7 @@ class FileBuildRule:
> self.IncListFileMacro = self.INC_LIST_MACRO
>
> self.SourceFileType = Type
> - # source files listed not in "*" or "?" pattern format
> + # source files listed not in TAB_STAR or "?" pattern format
> if not ExtraDependency:
> self.ExtraSourceFileList = []
> else:
> @@ -150,12 +150,12 @@ class FileBuildRule:
> self.SourceFileExtList = set()
> for File in Input:
> Base, Ext = os.path.splitext(File)
> - if Base.find("*") >= 0:
> - # There's "*" in the file name
> + if Base.find(TAB_STAR) >= 0:
> + # There's TAB_STAR in the file name
> self.IsMultipleInput = True
> self.GenFileListMacro = True
> elif Base.find("?") < 0:
> - # There's no "*" and "?" in file name
> + # There's no TAB_STAR and "?" in file name
> self.ExtraSourceFileList.append(File)
> continue
> self.SourceFileExtList.add(Ext) @@ -553,7 +553,7 @@ class BuildRule:
> #
> # @param FileExt The extension of a file
> # @param ToolChainFamily The tool chain family name
> - # @param BuildVersion The build version number. "*" means any
> rule
> + # @param BuildVersion The build version number. TAB_STAR means
> any rule
> # is applicalbe.
> #
> # @retval FileType The file type string
> diff --git a/BaseTools/Source/Python/BPDG/GenVpd.py
> b/BaseTools/Source/Python/BPDG/GenVpd.py
> index d7852d29eed0..e5da47f95e63 100644
> --- a/BaseTools/Source/Python/BPDG/GenVpd.py
> +++ b/BaseTools/Source/Python/BPDG/GenVpd.py
> @@ -21,7 +21,7 @@ import array
> import re
> from Common.LongFilePathSupport import OpenLongFilePath as open from
> struct import * -from Common.DataType import MAX_SIZE_TYPE,
> MAX_VAL_TYPE
> +from Common.DataType import MAX_SIZE_TYPE, MAX_VAL_TYPE,
> TAB_STAR
> import Common.EdkLogger as EdkLogger
> import Common.BuildToolError as BuildToolError
>
> @@ -87,7 +87,7 @@ class PcdEntry:
> # for both hexadecimal and decimal.
> #
> def _GenOffsetValue(self):
> - if self.PcdOffset != "*" :
> + if self.PcdOffset != TAB_STAR:
> try:
> self.PcdBinOffset = int (self.PcdOffset)
> except:
> @@ -423,7 +423,7 @@ class GenVPD :
> Alignment = 1
>
> PCD.Alignment = Alignment
> - if PCD.PcdOffset != '*':
> + if PCD.PcdOffset != TAB_STAR:
> if PCD.PcdOccupySize % Alignment != 0:
> if PCD.PcdUnpackValue.startswith("{"):
> EdkLogger.warn("BPDG", "The offset value of PCD %s is not 8-
> byte aligned!" %(PCD.PcdCName), File=self.InputFileName) @@ -469,7
> +469,7 @@ class GenVPD :
> def FormatFileLine (self) :
>
> for eachPcd in self.FileLinesList :
> - if eachPcd.PcdOffset != '*' :
> + if eachPcd.PcdOffset != TAB_STAR :
> # Use pcd's Offset value as key, and pcd's Value as value
> self.PcdFixedOffsetSizeList.append(eachPcd)
> else :
> @@ -484,7 +484,7 @@ class GenVPD :
> def FixVpdOffset (self):
> # At first, the offset should start at 0
> # Sort fixed offset list in order to find out where has free spaces for the
> pcd's offset
> - # value is "*" to insert into.
> + # value is TAB_STAR to insert into.
>
> self.PcdFixedOffsetSizeList.sort(key=lambda x: x.PcdBinOffset)
>
> @@ -502,7 +502,7 @@ class GenVPD :
> self.PcdUnknownOffsetList[index+i -1 ],
> self.PcdUnknownOffsetList[index+i] = self.PcdUnknownOffsetList[index+i],
> self.PcdUnknownOffsetList[index+i -1]
>
> #
> - # Process all Offset value are "*"
> + # Process all Offset value are TAB_STAR
> #
> if (len(self.PcdFixedOffsetSizeList) == 0) and
> (len(self.PcdUnknownOffsetList) != 0) :
> # The offset start from 0
> @@ -571,7 +571,7 @@ class GenVPD :
> eachUnfixedPcd =
> self.PcdUnknownOffsetList[countOfUnfixedList]
> needFixPcdSize = eachUnfixedPcd.PcdOccupySize
> # Not been fixed
> - if eachUnfixedPcd.PcdOffset == '*' :
> + if eachUnfixedPcd.PcdOffset == TAB_STAR :
> if LastOffset % eachUnfixedPcd.Alignment != 0:
> LastOffset = (LastOffset / eachUnfixedPcd.Alignment + 1) *
> eachUnfixedPcd.Alignment
> # The offset un-fixed pcd can write into this free space diff --
> git a/BaseTools/Source/Python/Common/DataType.py
> b/BaseTools/Source/Python/Common/DataType.py
> index 1d1d22faa40b..6b375712b65e 100644
> --- a/BaseTools/Source/Python/Common/DataType.py
> +++ b/BaseTools/Source/Python/Common/DataType.py
> @@ -31,6 +31,7 @@ TAB_OPTION_START = '<'
> TAB_OPTION_END = '>'
> TAB_SLASH = '\\'
> TAB_BACK_SLASH = '/'
> +TAB_STAR = '*'
> TAB_LINE_BREAK = '\n'
> TAB_PRINTCHAR_VT = '\x0b'
> TAB_PRINTCHAR_BS = '\b'
> diff --git a/BaseTools/Source/Python/Common/Expression.py
> b/BaseTools/Source/Python/Common/Expression.py
> index a21ab5daa73e..db1310d534fb 100644
> --- a/BaseTools/Source/Python/Common/Expression.py
> +++ b/BaseTools/Source/Python/Common/Expression.py
> @@ -244,7 +244,7 @@ class ValueExpression(BaseExpression):
> 'IN' : 'in'
> }
>
> - NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>', '<',
> '?', ':']
> + NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^', '~',
> + '<<', '>>', '!', '=', '>', '<', '?', ':']
>
>
> SymbolPattern = re.compile("("
> @@ -498,7 +498,7 @@ class ValueExpression(BaseExpression):
>
> # A [ * B]*
> def _MulExpr(self):
> - return self._ExprFuncTemplate(self._UnaryExpr, {"*", "/", "%"})
> + return self._ExprFuncTemplate(self._UnaryExpr, {TAB_STAR, "/",
> + "%"})
>
> # [!]*A
> def _UnaryExpr(self):
> diff --git a/BaseTools/Source/Python/Common/Misc.py
> b/BaseTools/Source/Python/Common/Misc.py
> index 3b8efb2e7179..61ba79241fb6 100644
> --- a/BaseTools/Source/Python/Common/Misc.py
> +++ b/BaseTools/Source/Python/Common/Misc.py
> @@ -1088,7 +1088,7 @@ class tdict:
> _ListType = type([])
> _TupleType = type(())
> _Wildcard = 'COMMON'
> - _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', '*', 'PLATFORM']
> + _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', TAB_STAR,
> + 'PLATFORM']
>
> def __init__(self, _Single_=False, _Level_=2):
> self._Level_ = _Level_
> diff --git a/BaseTools/Source/Python/Common/ToolDefClassObject.py
> b/BaseTools/Source/Python/Common/ToolDefClassObject.py
> index 05a1ddfbcc89..186d279840c1 100644
> --- a/BaseTools/Source/Python/Common/ToolDefClassObject.py
> +++ b/BaseTools/Source/Python/Common/ToolDefClassObject.py
> @@ -29,7 +29,8 @@ from Common import GlobalData from
> Common.MultipleWorkspace import MultipleWorkspace as mws from
> .DataType import TAB_TOD_DEFINES_TARGET,
> TAB_TOD_DEFINES_TOOL_CHAIN_TAG,\
> TAB_TOD_DEFINES_TARGET_ARCH,
> TAB_TOD_DEFINES_COMMAND_TYPE\
> - , TAB_TOD_DEFINES_FAMILY,
> TAB_TOD_DEFINES_BUILDRULEFAMILY
> + , TAB_TOD_DEFINES_FAMILY,
> TAB_TOD_DEFINES_BUILDRULEFAMILY,\
> + TAB_STAR, TAB_TAT_DEFINES_TOOL_CHAIN_CONF
>
>
> ##
> @@ -97,7 +98,7 @@ class ToolDefClassObject(object):
> # adding/removing items from the original dict.
> for Key in list(self.ToolsDefTxtDictionary.keys()):
> List = Key.split('_')
> - if List[Index] == '*':
> + if List[Index] == TAB_STAR:
> for String in self.ToolsDefTxtDatabase[KeyList[Index]]:
> List[Index] = String
> NewKey = '%s_%s_%s_%s_%s' % tuple(List) @@ -202,20 +203,20
> @@ class ToolDefClassObject(object):
> if len(List) != 5:
> EdkLogger.verbose("Line %d: Not a valid name of definition: %s" %
> ((Index + 1), Name))
> continue
> - elif List[4] == '*':
> + elif List[4] == TAB_STAR:
> EdkLogger.verbose("Line %d: '*' is not allowed in last field: %s" %
> ((Index + 1), Name))
> continue
> else:
> self.ToolsDefTxtDictionary[Name] = Value
> - if List[0] != '*':
> + if List[0] != TAB_STAR:
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET] +=
> [List[0]]
> - if List[1] != '*':
> + if List[1] != TAB_STAR:
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TOOL_CHAIN_TAG]
> += [List[1]]
> - if List[2] != '*':
> + if List[2] != TAB_STAR:
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET_ARCH] +=
> [List[2]]
> - if List[3] != '*':
> + if List[3] != TAB_STAR:
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_COMMAND_TYPE]
> += [List[3]]
> - if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] == '*' and List[3]
> == '*':
> + if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] == TAB_STAR
> and List[3] == TAB_STAR:
> if TAB_TOD_DEFINES_FAMILY not in self.ToolsDefTxtDatabase:
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY] = {}
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]] =
> Value @@ -226,7 +227,7 @@ class ToolDefClassObject(object):
>
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_BUILDRULEFAMILY][List[1]] =
> Value
> elif self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]]
> != Value:
> EdkLogger.verbose("Line %d: No override allowed for the family
> of a tool chain: %s" % ((Index + 1), Name))
> - if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and List[2] == '*'
> and List[3] == '*':
> + if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and List[2] ==
> TAB_STAR and List[3] == TAB_STAR:
> if TAB_TOD_DEFINES_BUILDRULEFAMILY not in
> self.ToolsDefTxtDatabase \
> or List[1] not in
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY]:
> EdkLogger.verbose("Line %d: The family is not specified, but
> BuildRuleFamily is specified for the tool chain: %s" % ((Index + 1), Name))
> @@ -270,8 +271,8 @@ class ToolDefClassObject(object):
> def ToolDefDict(ConfDir):
> Target = TargetTxtDict(ConfDir)
> ToolDef = ToolDefClassObject()
> - if DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CONF in
> Target.TargetTxtDictionary:
> - ToolsDefFile =
> Target.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CON
> F]
> + if TAB_TAT_DEFINES_TOOL_CHAIN_CONF in Target.TargetTxtDictionary:
> + ToolsDefFile =
> + Target.TargetTxtDictionary[TAB_TAT_DEFINES_TOOL_CHAIN_CONF]
> if ToolsDefFile:
> ToolDef.LoadToolDefFile(os.path.normpath(ToolsDefFile))
> else:
> diff --git a/BaseTools/Source/Python/Common/VpdInfoFile.py
> b/BaseTools/Source/Python/Common/VpdInfoFile.py
> index 2fb8e66fe99c..3be0670e36fb 100644
> --- a/BaseTools/Source/Python/Common/VpdInfoFile.py
> +++ b/BaseTools/Source/Python/Common/VpdInfoFile.py
> @@ -57,7 +57,7 @@ FILE_COMMENT_TEMPLATE = \
> # <PcdName> ::= <TokenSpaceCName> "." <PcdCName>
> # <TokenSpaceCName> ::= C Variable Name of the Token Space GUID
> # <PcdCName> ::= C Variable Name of the PCD
> -# <Offset> ::= {"*"} {<HexNumber>}
> +# <Offset> ::= {TAB_STAR} {<HexNumber>}
> # <HexNumber> ::= "0x" (a-fA-F0-9){1,8}
> # <Size> ::= <HexNumber>
> # <Value> ::= {<HexNumber>} {<NonNegativeInt>} {<QString>}
> {<Array>}
> @@ -92,7 +92,7 @@ class VpdInfoFile:
> if (Vpd is None):
> EdkLogger.error("VpdInfoFile",
> BuildToolError.ATTRIBUTE_UNKNOWN_ERROR, "Invalid VPD PCD entry.")
>
> - if not (Offset >= 0 or Offset == "*"):
> + if not (Offset >= 0 or Offset == TAB_STAR):
> EdkLogger.error("VpdInfoFile", BuildToolError.PARAMETER_INVALID,
> "Invalid offset parameter: %s." % Offset)
>
> if Vpd.DatumType == TAB_VOID:
> @@ -186,8 +186,8 @@ class VpdInfoFile:
> VpdObjectTokenCName = PcdItem[0]
> for sku in VpdObject.SkuInfoList:
> if VpdObject.TokenSpaceGuidCName == TokenSpaceName and
> VpdObjectTokenCName == PcdTokenName.strip() and sku == SkuId:
> - if self._VpdArray[VpdObject][sku] == "*":
> - if Offset == "*":
> + if self._VpdArray[VpdObject][sku] == TAB_STAR:
> + if Offset == TAB_STAR:
> EdkLogger.error("BPDG", BuildToolError.FORMAT_INVALID,
> "The offset of %s has not been fixed up by third-party BPDG tool." %
> PcdName)
> self._VpdArray[VpdObject][sku] = Offset
> Found = True
> diff --git a/BaseTools/Source/Python/GenFds/FdfParser.py
> b/BaseTools/Source/Python/GenFds/FdfParser.py
> index 44cc8f63d07b..cedc4ea0c122 100644
> --- a/BaseTools/Source/Python/GenFds/FdfParser.py
> +++ b/BaseTools/Source/Python/GenFds/FdfParser.py
> @@ -64,7 +64,6 @@ T_CHAR_CR = '\r'
> T_CHAR_TAB = '\t'
> T_CHAR_DOUBLE_QUOTE = '\"'
> T_CHAR_SINGLE_QUOTE = '\''
> -T_CHAR_STAR = '*'
> T_CHAR_BRACE_R = '}'
>
> SEPARATORS = {TAB_EQUAL_SPLIT, TAB_VALUE_SPLIT,
> TAB_COMMA_SPLIT, '{', T_CHAR_BRACE_R} @@ -533,7 +532,7 @@ class
> FdfParser:
> InComment = False
> HashComment = False
> # check for */ comment end
> - elif InComment and not DoubleSlashComment and not HashComment
> and self._CurrentChar() == T_CHAR_STAR and self._NextChar() ==
> TAB_BACK_SLASH:
> + elif InComment and not DoubleSlashComment and not
> HashComment and self._CurrentChar() == TAB_STAR and self._NextChar()
> == TAB_BACK_SLASH:
> self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> self._GetOneChar()
> self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> @@ -552,7 +551,7 @@ class FdfParser:
> InComment = True
> HashComment = True
> # check for /* comment start
> - elif self._CurrentChar() == TAB_BACK_SLASH and self._NextChar() ==
> T_CHAR_STAR:
> + elif self._CurrentChar() == TAB_BACK_SLASH and self._NextChar() ==
> TAB_STAR:
> self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> self._GetOneChar()
> self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> diff --git a/BaseTools/Source/Python/GenFds/GenFds.py
> b/BaseTools/Source/Python/GenFds/GenFds.py
> index 0c8091b79841..0513f488fca3 100644
> --- a/BaseTools/Source/Python/GenFds/GenFds.py
> +++ b/BaseTools/Source/Python/GenFds/GenFds.py
> @@ -653,7 +653,7 @@ class GenFds(object):
> FileGuidList.append(FileStatementGuid)
> Name = []
> FfsPath = os.path.join(GenFdsGlobalVariable.FvDir, 'Ffs')
> - FfsPath = glob(os.path.join(FfsPath, FileStatementGuid) + '*')
> + FfsPath = glob(os.path.join(FfsPath,
> + FileStatementGuid) + TAB_STAR)
> if not FfsPath:
> continue
> if not os.path.exists(FfsPath[0]):
> diff --git a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> index ea61f723a73c..0812c56bdae8 100644
> --- a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> +++ b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> @@ -217,12 +217,12 @@ class GenFdsGlobalVariable:
>
> if not Inf.IsBinaryModule:
> for File in Inf.Sources:
> - if File.TagName in {"", "*", GenFdsGlobalVariable.ToolChainTag} and
> \
> - File.ToolChainFamily in {"", "*",
> GenFdsGlobalVariable.ToolChainFamily}:
> + if File.TagName in {"", DataType.TAB_STAR,
> GenFdsGlobalVariable.ToolChainTag} and \
> + File.ToolChainFamily in {"", DataType.TAB_STAR,
> GenFdsGlobalVariable.ToolChainFamily}:
> FileList.append((File, DataType.TAB_UNKNOWN_FILE))
>
> for File in Inf.Binaries:
> - if File.Target in {DataType.TAB_COMMON, '*',
> GenFdsGlobalVariable.TargetName}:
> + if File.Target in {DataType.TAB_COMMON, DataType.TAB_STAR,
> GenFdsGlobalVariable.TargetName}:
> FileList.append((File, File.Type))
>
> for File, FileType in FileList:
> @@ -893,7 +893,7 @@ def FindExtendTool(KeyStringList, CurrentArchList,
> NameGuid):
> for Index in range(2, -1, -1):
> for Key in list(BuildOption.keys()):
> List = Key.split('_')
> - if List[Index] == '*':
> + if List[Index] == DataType.TAB_STAR:
> for String in ToolDb[ToolList[Index]]:
> if String in [Arch, GenFdsGlobalVariable.TargetName,
> GenFdsGlobalVariable.ToolChainTag]:
> List[Index] = String diff --git
> a/BaseTools/Source/Python/GenFds/Section.py
> b/BaseTools/Source/Python/GenFds/Section.py
> index 19a70009dcce..bab74aedf0b9 100644
> --- a/BaseTools/Source/Python/GenFds/Section.py
> +++ b/BaseTools/Source/Python/GenFds/Section.py
> @@ -131,7 +131,7 @@ class Section (SectionClassObject):
> if File.Type == FileType or (int(FfsInf.PiSpecVersion, 16) >=
> 0x0001000A \
> and FileType == 'DXE_DPEX' and File.Type ==
> BINARY_FILE_TYPE_SMM_DEPEX) \
> or (FileType == BINARY_FILE_TYPE_TE and File.Type
> == BINARY_FILE_TYPE_PE32):
> - if '*' in FfsInf.TargetOverrideList or File.Target == '*' or
> File.Target in FfsInf.TargetOverrideList or FfsInf.TargetOverrideList == []:
> + if TAB_STAR in FfsInf.TargetOverrideList or File.Target ==
> TAB_STAR or File.Target in FfsInf.TargetOverrideList or
> FfsInf.TargetOverrideList == []:
> FileList.append(FfsInf.PatchEfiFile(File.Path, File.Type))
> else:
> GenFdsGlobalVariable.InfLogger ("\nBuild Target \'%s\' of File
> %s is not in the Scope of %s specified by INF %s in FDF" %(File.Target,
> File.File, FfsInf.TargetOverrideList, FfsInf.InfFileName)) diff --git
> a/BaseTools/Source/Python/Workspace/DscBuildData.py
> b/BaseTools/Source/Python/Workspace/DscBuildData.py
> index 11aa63fb263c..22cbbb119a5a 100644
> --- a/BaseTools/Source/Python/Workspace/DscBuildData.py
> +++ b/BaseTools/Source/Python/Workspace/DscBuildData.py
> @@ -2315,11 +2315,11 @@ class DscBuildData(PlatformBuildClassObject):
> continue
> if Attr != "FLAGS":
> continue
> - if Target == "*" or Target == self._Target:
> - if Tag == "*" or Tag == self._Toolchain:
> + if Target == TAB_STAR or Target == self._Target:
> + if Tag == TAB_STAR or Tag == self._Toolchain:
> if 'COMMON' not in BuildOptions:
> BuildOptions['COMMON'] = set()
> - if Arch == "*":
> + if Arch == TAB_STAR:
> BuildOptions['COMMON'].add(self.BuildOptions[Options])
> if Arch in self.SupArchList:
> if Arch not in BuildOptions:
> --
> 2.16.2.windows.1
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*'
2018-12-03 15:19 ` Carsey, Jaben
@ 2018-12-04 1:52 ` Zhu, Yonghong
2018-12-07 0:50 ` Carsey, Jaben
0 siblings, 1 reply; 8+ messages in thread
From: Zhu, Yonghong @ 2018-12-04 1:52 UTC (permalink / raw)
To: Carsey, Jaben, edk2-devel@lists.01.org; +Cc: Gao, Liming, Zhu, Yonghong
Yes. I prefer not to change it.
Best Regards,
Zhu Yonghong
-----Original Message-----
From: Carsey, Jaben
Sent: Monday, December 03, 2018 11:19 PM
To: Zhu, Yonghong <yonghong.zhu@intel.com>; edk2-devel@lists.01.org
Cc: Gao, Liming <liming.gao@intel.com>
Subject: RE: [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*'
I was trying to change all use of *, without regard to the usage of it.
Do you think that mathematical * should not be changed?
-Jaben
> -----Original Message-----
> From: Zhu, Yonghong
> Sent: Sunday, December 02, 2018 6:31 PM
> To: Carsey, Jaben <jaben.carsey@intel.com>; edk2-devel@lists.01.org
> Cc: Gao, Liming <liming.gao@intel.com>; Zhu, Yonghong
> <yonghong.zhu@intel.com>
> Subject: RE: [Patch v1 1/1] BaseTools: create and use a standard
> shared variable for '*'
> Importance: High
>
> Hi Jaben,
>
> In this patch, it also changed the mathematics multiplicative '*'
> (used in
> expression) to TAB_STAR, is it by on purpose?
> Eg:
> - NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>', '<',
> '?', ':']
> + NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^',
> + '~', '<<', '>>', '!', '=',
> '>', '<', '?', ':']
>
> Best Regards,
> Zhu Yonghong
>
> -----Original Message-----
> From: Carsey, Jaben
> Sent: Friday, November 16, 2018 11:40 PM
> To: edk2-devel@lists.01.org
> Cc: Zhu, Yonghong <yonghong.zhu@intel.com>; Gao, Liming
> <liming.gao@intel.com>
> Subject: [Patch v1 1/1] BaseTools: create and use a standard shared
> variable for '*'
>
> add a variable for the string '*' and then use it instead of lots of '*'
>
> Cc: Yonghong Zhu <yonghong.zhu@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
> ---
> BaseTools/Source/Python/AutoGen/AutoGen.py | 54 ++++++++++---
> -------
> BaseTools/Source/Python/AutoGen/BuildEngine.py | 10 ++--
> BaseTools/Source/Python/BPDG/GenVpd.py | 14 ++---
> BaseTools/Source/Python/Common/DataType.py | 1 +
> BaseTools/Source/Python/Common/Expression.py | 4 +-
> BaseTools/Source/Python/Common/Misc.py | 2 +-
> BaseTools/Source/Python/Common/ToolDefClassObject.py | 23 +++++----
> BaseTools/Source/Python/Common/VpdInfoFile.py | 8 +--
> BaseTools/Source/Python/GenFds/FdfParser.py | 5 +-
> BaseTools/Source/Python/GenFds/GenFds.py | 2 +-
> BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py | 8 +--
> BaseTools/Source/Python/GenFds/Section.py | 2 +-
> BaseTools/Source/Python/Workspace/DscBuildData.py | 6 +--
> 13 files changed, 70 insertions(+), 69 deletions(-)
>
> diff --git a/BaseTools/Source/Python/AutoGen/AutoGen.py
> b/BaseTools/Source/Python/AutoGen/AutoGen.py
> index f3560bfc787d..25417c447061 100644
> --- a/BaseTools/Source/Python/AutoGen/AutoGen.py
> +++ b/BaseTools/Source/Python/AutoGen/AutoGen.py
> @@ -1438,7 +1438,7 @@ class PlatformAutoGen(AutoGen):
> PcdValue = Sku.DefaultValue
> if PcdValue == "":
> PcdValue = Pcd.DefaultValue
> - if Sku.VpdOffset != '*':
> + if Sku.VpdOffset != TAB_STAR:
> if PcdValue.startswith("{"):
> Alignment = 8
> elif PcdValue.startswith("L"):
> @@ -1462,7 +1462,7 @@ class PlatformAutoGen(AutoGen):
> VpdFile.Add(Pcd, SkuName, Sku.VpdOffset)
> SkuValueMap[PcdValue].append(Sku)
> # if the offset of a VPD is *, then it need
> to be fixed up by third party tool.
> - if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
> + if not NeedProcessVpdMapFile and
> + Sku.VpdOffset ==
> TAB_STAR:
> NeedProcessVpdMapFile = True
> if self.Platform.VpdToolGuid is None or
> self.Platform.VpdToolGuid == '':
> EdkLogger.error("Build",
> FILE_NOT_FOUND, \ @@ -1522,7
> +1522,7 @@ class PlatformAutoGen(AutoGen):
> PcdValue = Sku.DefaultValue
> if PcdValue == "":
> PcdValue = DscPcdEntry.DefaultValue
> - if Sku.VpdOffset != '*':
> + if Sku.VpdOffset != TAB_STAR:
> if PcdValue.startswith("{"):
> Alignment = 8
> elif PcdValue.startswith("L"):
> @@ -1545,7 +1545,7 @@ class PlatformAutoGen(AutoGen):
> SkuValueMap[PcdValue] = []
> VpdFile.Add(DscPcdEntry, SkuName, Sku.VpdOffset)
> SkuValueMap[PcdValue].append(Sku)
> - if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
> + if not NeedProcessVpdMapFile and
> + Sku.VpdOffset ==
> TAB_STAR:
> NeedProcessVpdMapFile = True
> if DscPcdEntry.DatumType == TAB_VOID and
> PcdValue.startswith("L"):
> UnicodePcdArray.add(DscPcdEntry) @@
> -1573,7 +1573,7 @@ class PlatformAutoGen(AutoGen):
> if os.path.exists(VpdMapFilePath):
> VpdFile.Read(VpdMapFilePath)
>
> - # Fixup "*" offset
> + # Fixup TAB_STAR offset
> for pcd in VpdSkuMap:
> vpdinfo = VpdFile.GetVpdInfo(pcd)
> if vpdinfo is None:
> @@ -2210,15 +2210,15 @@ class PlatformAutoGen(AutoGen):
> def CalculatePriorityValue(self, Key):
> Target, ToolChain, Arch, CommandType, Attr = Key.split('_')
> PriorityValue = 0x11111
> - if Target == "*":
> + if Target == TAB_STAR:
> PriorityValue &= 0x01111
> - if ToolChain == "*":
> + if ToolChain == TAB_STAR:
> PriorityValue &= 0x10111
> - if Arch == "*":
> + if Arch == TAB_STAR:
> PriorityValue &= 0x11011
> - if CommandType == "*":
> + if CommandType == TAB_STAR:
> PriorityValue &= 0x11101
> - if Attr == "*":
> + if Attr == TAB_STAR:
> PriorityValue &= 0x11110
>
> return self.PrioList["0x%0.5x" % PriorityValue] @@ -2253,9
> +2253,9 @@ class PlatformAutoGen(AutoGen):
> if (Key[0] == self.BuildRuleFamily and
> (ModuleStyle is None or len(Key) < 3 or (len(Key) > 2
> and Key[2] ==
> ModuleStyle))):
> Target, ToolChain, Arch, CommandType, Attr = Key[1].split('_')
> - if (Target == self.BuildTarget or Target == "*") and\
> - (ToolChain == self.ToolChain or ToolChain == "*") and\
> - (Arch == self.Arch or Arch == "*") and\
> + if (Target == self.BuildTarget or Target == TAB_STAR) and\
> + (ToolChain == self.ToolChain or ToolChain == TAB_STAR) and\
> + (Arch == self.Arch or Arch == TAB_STAR) and\
> Options[Key].startswith("="):
>
> if OverrideList.get(Key[1]) is not None:
> @@ -2276,11 +2276,11 @@ class PlatformAutoGen(AutoGen):
> # Compare two Key, if one is included by another,
> choose the higher priority one
> #
> Target2, ToolChain2, Arch2, CommandType2, Attr2 =
> NextKey.split("_")
> - if (Target1 == Target2 or Target1 == "*" or Target2 == "*") and\
> - (ToolChain1 == ToolChain2 or ToolChain1 == "*" or ToolChain2
> == "*") and\
> - (Arch1 == Arch2 or Arch1 == "*" or Arch2 == "*") and\
> - (CommandType1 == CommandType2 or CommandType1 == "*"
> or CommandType2 == "*") and\
> - (Attr1 == Attr2 or Attr1 == "*" or Attr2 == "*"):
> + if (Target1 == Target2 or Target1 == TAB_STAR or
> + Target2 ==
> TAB_STAR) and\
> + (ToolChain1 == ToolChain2 or ToolChain1 ==
> + TAB_STAR or
> ToolChain2 == TAB_STAR) and\
> + (Arch1 == Arch2 or Arch1 == TAB_STAR or Arch2
> + == TAB_STAR)
> and\
> + (CommandType1 == CommandType2 or CommandType1
> + ==
> TAB_STAR or CommandType2 == TAB_STAR) and\
> + (Attr1 == Attr2 or Attr1 == TAB_STAR or Attr2 == TAB_STAR):
>
> if self.CalculatePriorityValue(NowKey) >
> self.CalculatePriorityValue(NextKey):
> if Options.get((self.BuildRuleFamily, NextKey)) is not None:
> @@ -2309,9 +2309,9 @@ class PlatformAutoGen(AutoGen):
> continue
> FamilyMatch = True
> # expand any wildcard
> - if Target == "*" or Target == self.BuildTarget:
> - if Tag == "*" or Tag == self.ToolChain:
> - if Arch == "*" or Arch == self.Arch:
> + if Target == TAB_STAR or Target == self.BuildTarget:
> + if Tag == TAB_STAR or Tag == self.ToolChain:
> + if Arch == TAB_STAR or Arch == self.Arch:
> if Tool not in BuildOptions:
> BuildOptions[Tool] = {}
> if Attr != "FLAGS" or Attr not in
> BuildOptions[Tool] or
> Options[Key].startswith('='):
> @@ -2344,9 +2344,9 @@ class PlatformAutoGen(AutoGen):
> continue
>
> # expand any wildcard
> - if Target == "*" or Target == self.BuildTarget:
> - if Tag == "*" or Tag == self.ToolChain:
> - if Arch == "*" or Arch == self.Arch:
> + if Target == TAB_STAR or Target == self.BuildTarget:
> + if Tag == TAB_STAR or Tag == self.ToolChain:
> + if Arch == TAB_STAR or Arch == self.Arch:
> if Tool not in BuildOptions:
> BuildOptions[Tool] = {}
> if Attr != "FLAGS" or Attr not in
> BuildOptions[Tool] or
> Options[Key].startswith('='):
> @@ -2971,8 +2971,8 @@ class ModuleAutoGen(AutoGen):
> @cached_property
> def SourceFileList(self):
> RetVal = []
> - ToolChainTagSet = {"", "*", self.ToolChain}
> - ToolChainFamilySet = {"", "*", self.ToolChainFamily,
> self.BuildRuleFamily}
> + ToolChainTagSet = {"", TAB_STAR, self.ToolChain}
> + ToolChainFamilySet = {"", TAB_STAR, self.ToolChainFamily,
> + self.BuildRuleFamily}
> for F in self.Module.Sources:
> # match tool chain
> if F.TagName not in ToolChainTagSet:
> @@ -3047,7 +3047,7 @@ class ModuleAutoGen(AutoGen):
> def BinaryFileList(self):
> RetVal = []
> for F in self.Module.Binaries:
> - if F.Target not in [TAB_ARCH_COMMON, '*'] and F.Target !=
> self.BuildTarget:
> + if F.Target not in [TAB_ARCH_COMMON, TAB_STAR] and
> + F.Target !=
> self.BuildTarget:
> continue
> RetVal.append(F)
> self._ApplyBuildRule(F, F.Type, BinaryFileList=RetVal)
> diff --git a/BaseTools/Source/Python/AutoGen/BuildEngine.py
> b/BaseTools/Source/Python/AutoGen/BuildEngine.py
> index ac7a6687552c..f9e3ac3a1daf 100644
> --- a/BaseTools/Source/Python/AutoGen/BuildEngine.py
> +++ b/BaseTools/Source/Python/AutoGen/BuildEngine.py
> @@ -110,7 +110,7 @@ class FileBuildRule:
> self.IncListFileMacro = self.INC_LIST_MACRO
>
> self.SourceFileType = Type
> - # source files listed not in "*" or "?" pattern format
> + # source files listed not in TAB_STAR or "?" pattern format
> if not ExtraDependency:
> self.ExtraSourceFileList = []
> else:
> @@ -150,12 +150,12 @@ class FileBuildRule:
> self.SourceFileExtList = set()
> for File in Input:
> Base, Ext = os.path.splitext(File)
> - if Base.find("*") >= 0:
> - # There's "*" in the file name
> + if Base.find(TAB_STAR) >= 0:
> + # There's TAB_STAR in the file name
> self.IsMultipleInput = True
> self.GenFileListMacro = True
> elif Base.find("?") < 0:
> - # There's no "*" and "?" in file name
> + # There's no TAB_STAR and "?" in file name
> self.ExtraSourceFileList.append(File)
> continue
> self.SourceFileExtList.add(Ext) @@ -553,7 +553,7 @@ class BuildRule:
> #
> # @param FileExt The extension of a file
> # @param ToolChainFamily The tool chain family name
> - # @param BuildVersion The build version number. "*" means any
> rule
> + # @param BuildVersion The build version number. TAB_STAR means
> any rule
> # is applicalbe.
> #
> # @retval FileType The file type string
> diff --git a/BaseTools/Source/Python/BPDG/GenVpd.py
> b/BaseTools/Source/Python/BPDG/GenVpd.py
> index d7852d29eed0..e5da47f95e63 100644
> --- a/BaseTools/Source/Python/BPDG/GenVpd.py
> +++ b/BaseTools/Source/Python/BPDG/GenVpd.py
> @@ -21,7 +21,7 @@ import array
> import re
> from Common.LongFilePathSupport import OpenLongFilePath as open from
> struct import * -from Common.DataType import MAX_SIZE_TYPE,
> MAX_VAL_TYPE
> +from Common.DataType import MAX_SIZE_TYPE, MAX_VAL_TYPE,
> TAB_STAR
> import Common.EdkLogger as EdkLogger
> import Common.BuildToolError as BuildToolError
>
> @@ -87,7 +87,7 @@ class PcdEntry:
> # for both hexadecimal and decimal.
> #
> def _GenOffsetValue(self):
> - if self.PcdOffset != "*" :
> + if self.PcdOffset != TAB_STAR:
> try:
> self.PcdBinOffset = int (self.PcdOffset)
> except:
> @@ -423,7 +423,7 @@ class GenVPD :
> Alignment = 1
>
> PCD.Alignment = Alignment
> - if PCD.PcdOffset != '*':
> + if PCD.PcdOffset != TAB_STAR:
> if PCD.PcdOccupySize % Alignment != 0:
> if PCD.PcdUnpackValue.startswith("{"):
> EdkLogger.warn("BPDG", "The offset value
> of PCD %s is not 8- byte aligned!" %(PCD.PcdCName),
> File=self.InputFileName) @@ -469,7
> +469,7 @@ class GenVPD :
> def FormatFileLine (self) :
>
> for eachPcd in self.FileLinesList :
> - if eachPcd.PcdOffset != '*' :
> + if eachPcd.PcdOffset != TAB_STAR :
> # Use pcd's Offset value as key, and pcd's Value as value
> self.PcdFixedOffsetSizeList.append(eachPcd)
> else :
> @@ -484,7 +484,7 @@ class GenVPD :
> def FixVpdOffset (self):
> # At first, the offset should start at 0
> # Sort fixed offset list in order to find out where has free
> spaces for the pcd's offset
> - # value is "*" to insert into.
> + # value is TAB_STAR to insert into.
>
> self.PcdFixedOffsetSizeList.sort(key=lambda x:
> x.PcdBinOffset)
>
> @@ -502,7 +502,7 @@ class GenVPD :
> self.PcdUnknownOffsetList[index+i -1 ],
> self.PcdUnknownOffsetList[index+i] =
> self.PcdUnknownOffsetList[index+i],
> self.PcdUnknownOffsetList[index+i -1]
>
> #
> - # Process all Offset value are "*"
> + # Process all Offset value are TAB_STAR
> #
> if (len(self.PcdFixedOffsetSizeList) == 0) and
> (len(self.PcdUnknownOffsetList) != 0) :
> # The offset start from 0 @@ -571,7 +571,7 @@ class
> GenVPD :
> eachUnfixedPcd =
> self.PcdUnknownOffsetList[countOfUnfixedList]
> needFixPcdSize = eachUnfixedPcd.PcdOccupySize
> # Not been fixed
> - if eachUnfixedPcd.PcdOffset == '*' :
> + if eachUnfixedPcd.PcdOffset == TAB_STAR :
> if LastOffset % eachUnfixedPcd.Alignment != 0:
> LastOffset = (LastOffset /
> eachUnfixedPcd.Alignment + 1) * eachUnfixedPcd.Alignment
> # The offset un-fixed pcd can write into
> this free space diff -- git
> a/BaseTools/Source/Python/Common/DataType.py
> b/BaseTools/Source/Python/Common/DataType.py
> index 1d1d22faa40b..6b375712b65e 100644
> --- a/BaseTools/Source/Python/Common/DataType.py
> +++ b/BaseTools/Source/Python/Common/DataType.py
> @@ -31,6 +31,7 @@ TAB_OPTION_START = '<'
> TAB_OPTION_END = '>'
> TAB_SLASH = '\\'
> TAB_BACK_SLASH = '/'
> +TAB_STAR = '*'
> TAB_LINE_BREAK = '\n'
> TAB_PRINTCHAR_VT = '\x0b'
> TAB_PRINTCHAR_BS = '\b'
> diff --git a/BaseTools/Source/Python/Common/Expression.py
> b/BaseTools/Source/Python/Common/Expression.py
> index a21ab5daa73e..db1310d534fb 100644
> --- a/BaseTools/Source/Python/Common/Expression.py
> +++ b/BaseTools/Source/Python/Common/Expression.py
> @@ -244,7 +244,7 @@ class ValueExpression(BaseExpression):
> 'IN' : 'in'
> }
>
> - NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>', '<',
> '?', ':']
> + NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^',
> + '~', '<<', '>>', '!', '=', '>', '<', '?', ':']
>
>
> SymbolPattern = re.compile("("
> @@ -498,7 +498,7 @@ class ValueExpression(BaseExpression):
>
> # A [ * B]*
> def _MulExpr(self):
> - return self._ExprFuncTemplate(self._UnaryExpr, {"*", "/", "%"})
> + return self._ExprFuncTemplate(self._UnaryExpr, {TAB_STAR,
> + "/",
> + "%"})
>
> # [!]*A
> def _UnaryExpr(self):
> diff --git a/BaseTools/Source/Python/Common/Misc.py
> b/BaseTools/Source/Python/Common/Misc.py
> index 3b8efb2e7179..61ba79241fb6 100644
> --- a/BaseTools/Source/Python/Common/Misc.py
> +++ b/BaseTools/Source/Python/Common/Misc.py
> @@ -1088,7 +1088,7 @@ class tdict:
> _ListType = type([])
> _TupleType = type(())
> _Wildcard = 'COMMON'
> - _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', '*', 'PLATFORM']
> + _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', TAB_STAR,
> + 'PLATFORM']
>
> def __init__(self, _Single_=False, _Level_=2):
> self._Level_ = _Level_
> diff --git a/BaseTools/Source/Python/Common/ToolDefClassObject.py
> b/BaseTools/Source/Python/Common/ToolDefClassObject.py
> index 05a1ddfbcc89..186d279840c1 100644
> --- a/BaseTools/Source/Python/Common/ToolDefClassObject.py
> +++ b/BaseTools/Source/Python/Common/ToolDefClassObject.py
> @@ -29,7 +29,8 @@ from Common import GlobalData from
> Common.MultipleWorkspace import MultipleWorkspace as mws from
> .DataType import TAB_TOD_DEFINES_TARGET,
> TAB_TOD_DEFINES_TOOL_CHAIN_TAG,\
> TAB_TOD_DEFINES_TARGET_ARCH,
> TAB_TOD_DEFINES_COMMAND_TYPE\
> - , TAB_TOD_DEFINES_FAMILY,
> TAB_TOD_DEFINES_BUILDRULEFAMILY
> + , TAB_TOD_DEFINES_FAMILY,
> TAB_TOD_DEFINES_BUILDRULEFAMILY,\
> + TAB_STAR, TAB_TAT_DEFINES_TOOL_CHAIN_CONF
>
>
> ##
> @@ -97,7 +98,7 @@ class ToolDefClassObject(object):
> # adding/removing items from the original dict.
> for Key in list(self.ToolsDefTxtDictionary.keys()):
> List = Key.split('_')
> - if List[Index] == '*':
> + if List[Index] == TAB_STAR:
> for String in self.ToolsDefTxtDatabase[KeyList[Index]]:
> List[Index] = String
> NewKey = '%s_%s_%s_%s_%s' % tuple(List) @@
> -202,20 +203,20 @@ class ToolDefClassObject(object):
> if len(List) != 5:
> EdkLogger.verbose("Line %d: Not a valid name of
> definition: %s" % ((Index + 1), Name))
> continue
> - elif List[4] == '*':
> + elif List[4] == TAB_STAR:
> EdkLogger.verbose("Line %d: '*' is not allowed in
> last field: %s" % ((Index + 1), Name))
> continue
> else:
> self.ToolsDefTxtDictionary[Name] = Value
> - if List[0] != '*':
> + if List[0] != TAB_STAR:
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET]
> += [List[0]]
> - if List[1] != '*':
> + if List[1] != TAB_STAR:
>
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TOOL_CHAIN_TAG]
> += [List[1]]
> - if List[2] != '*':
> + if List[2] != TAB_STAR:
>
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET_ARCH] += [List[2]]
> - if List[3] != '*':
> + if List[3] != TAB_STAR:
>
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_COMMAND_TYPE]
> += [List[3]]
> - if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] == '*' and List[3]
> == '*':
> + if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] ==
> + TAB_STAR
> and List[3] == TAB_STAR:
> if TAB_TOD_DEFINES_FAMILY not in self.ToolsDefTxtDatabase:
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY] = {}
>
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]] = Value @@ -226,7 +227,7 @@ class ToolDefClassObject(object):
>
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_BUILDRULEFAMILY][List[1]] =
> Value
> elif
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]]
> != Value:
> EdkLogger.verbose("Line %d: No override
> allowed for the family of a tool chain: %s" % ((Index + 1), Name))
> - if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and List[2] == '*'
> and List[3] == '*':
> + if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and
> + List[2] ==
> TAB_STAR and List[3] == TAB_STAR:
> if TAB_TOD_DEFINES_BUILDRULEFAMILY not in
> self.ToolsDefTxtDatabase \
> or List[1] not in
> self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY]:
> EdkLogger.verbose("Line %d: The family is not
> specified, but BuildRuleFamily is specified for the tool chain: %s" %
> ((Index + 1), Name)) @@ -270,8 +271,8 @@ class ToolDefClassObject(object):
> def ToolDefDict(ConfDir):
> Target = TargetTxtDict(ConfDir)
> ToolDef = ToolDefClassObject()
> - if DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CONF in
> Target.TargetTxtDictionary:
> - ToolsDefFile =
> Target.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CON
> F]
> + if TAB_TAT_DEFINES_TOOL_CHAIN_CONF in Target.TargetTxtDictionary:
> + ToolsDefFile =
> + Target.TargetTxtDictionary[TAB_TAT_DEFINES_TOOL_CHAIN_CONF]
> if ToolsDefFile:
> ToolDef.LoadToolDefFile(os.path.normpath(ToolsDefFile))
> else:
> diff --git a/BaseTools/Source/Python/Common/VpdInfoFile.py
> b/BaseTools/Source/Python/Common/VpdInfoFile.py
> index 2fb8e66fe99c..3be0670e36fb 100644
> --- a/BaseTools/Source/Python/Common/VpdInfoFile.py
> +++ b/BaseTools/Source/Python/Common/VpdInfoFile.py
> @@ -57,7 +57,7 @@ FILE_COMMENT_TEMPLATE = \
> # <PcdName> ::= <TokenSpaceCName> "." <PcdCName>
> # <TokenSpaceCName> ::= C Variable Name of the Token Space GUID
> # <PcdCName> ::= C Variable Name of the PCD
> -# <Offset> ::= {"*"} {<HexNumber>}
> +# <Offset> ::= {TAB_STAR} {<HexNumber>}
> # <HexNumber> ::= "0x" (a-fA-F0-9){1,8}
> # <Size> ::= <HexNumber>
> # <Value> ::= {<HexNumber>} {<NonNegativeInt>} {<QString>}
> {<Array>}
> @@ -92,7 +92,7 @@ class VpdInfoFile:
> if (Vpd is None):
> EdkLogger.error("VpdInfoFile",
> BuildToolError.ATTRIBUTE_UNKNOWN_ERROR, "Invalid VPD PCD entry.")
>
> - if not (Offset >= 0 or Offset == "*"):
> + if not (Offset >= 0 or Offset == TAB_STAR):
> EdkLogger.error("VpdInfoFile",
> BuildToolError.PARAMETER_INVALID, "Invalid offset parameter: %s." %
> Offset)
>
> if Vpd.DatumType == TAB_VOID:
> @@ -186,8 +186,8 @@ class VpdInfoFile:
> VpdObjectTokenCName = PcdItem[0]
> for sku in VpdObject.SkuInfoList:
> if VpdObject.TokenSpaceGuidCName ==
> TokenSpaceName and VpdObjectTokenCName == PcdTokenName.strip() and sku == SkuId:
> - if self._VpdArray[VpdObject][sku] == "*":
> - if Offset == "*":
> + if self._VpdArray[VpdObject][sku] == TAB_STAR:
> + if Offset == TAB_STAR:
> EdkLogger.error("BPDG",
> BuildToolError.FORMAT_INVALID, "The offset of %s has not been fixed up
> by third-party BPDG tool." %
> PcdName)
> self._VpdArray[VpdObject][sku] = Offset
> Found = True
> diff --git a/BaseTools/Source/Python/GenFds/FdfParser.py
> b/BaseTools/Source/Python/GenFds/FdfParser.py
> index 44cc8f63d07b..cedc4ea0c122 100644
> --- a/BaseTools/Source/Python/GenFds/FdfParser.py
> +++ b/BaseTools/Source/Python/GenFds/FdfParser.py
> @@ -64,7 +64,6 @@ T_CHAR_CR = '\r'
> T_CHAR_TAB = '\t'
> T_CHAR_DOUBLE_QUOTE = '\"'
> T_CHAR_SINGLE_QUOTE = '\''
> -T_CHAR_STAR = '*'
> T_CHAR_BRACE_R = '}'
>
> SEPARATORS = {TAB_EQUAL_SPLIT, TAB_VALUE_SPLIT, TAB_COMMA_SPLIT, '{',
> T_CHAR_BRACE_R} @@ -533,7 +532,7 @@ class
> FdfParser:
> InComment = False
> HashComment = False
> # check for */ comment end
> - elif InComment and not DoubleSlashComment and not HashComment
> and self._CurrentChar() == T_CHAR_STAR and self._NextChar() ==
> TAB_BACK_SLASH:
> + elif InComment and not DoubleSlashComment and not
> HashComment and self._CurrentChar() == TAB_STAR and self._NextChar()
> == TAB_BACK_SLASH:
> self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> self._GetOneChar()
> self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> @@ -552,7 +551,7 @@ class FdfParser:
> InComment = True
> HashComment = True
> # check for /* comment start
> - elif self._CurrentChar() == TAB_BACK_SLASH and self._NextChar() ==
> T_CHAR_STAR:
> + elif self._CurrentChar() == TAB_BACK_SLASH and
> + self._NextChar() ==
> TAB_STAR:
> self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> self._GetOneChar()
> self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> diff --git a/BaseTools/Source/Python/GenFds/GenFds.py
> b/BaseTools/Source/Python/GenFds/GenFds.py
> index 0c8091b79841..0513f488fca3 100644
> --- a/BaseTools/Source/Python/GenFds/GenFds.py
> +++ b/BaseTools/Source/Python/GenFds/GenFds.py
> @@ -653,7 +653,7 @@ class GenFds(object):
> FileGuidList.append(FileStatementGuid)
> Name = []
> FfsPath = os.path.join(GenFdsGlobalVariable.FvDir, 'Ffs')
> - FfsPath = glob(os.path.join(FfsPath, FileStatementGuid) + '*')
> + FfsPath = glob(os.path.join(FfsPath,
> + FileStatementGuid) + TAB_STAR)
> if not FfsPath:
> continue
> if not os.path.exists(FfsPath[0]):
> diff --git a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> index ea61f723a73c..0812c56bdae8 100644
> --- a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> +++ b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> @@ -217,12 +217,12 @@ class GenFdsGlobalVariable:
>
> if not Inf.IsBinaryModule:
> for File in Inf.Sources:
> - if File.TagName in {"", "*", GenFdsGlobalVariable.ToolChainTag} and
> \
> - File.ToolChainFamily in {"", "*",
> GenFdsGlobalVariable.ToolChainFamily}:
> + if File.TagName in {"", DataType.TAB_STAR,
> GenFdsGlobalVariable.ToolChainTag} and \
> + File.ToolChainFamily in {"", DataType.TAB_STAR,
> GenFdsGlobalVariable.ToolChainFamily}:
> FileList.append((File,
> DataType.TAB_UNKNOWN_FILE))
>
> for File in Inf.Binaries:
> - if File.Target in {DataType.TAB_COMMON, '*',
> GenFdsGlobalVariable.TargetName}:
> + if File.Target in {DataType.TAB_COMMON,
> + DataType.TAB_STAR,
> GenFdsGlobalVariable.TargetName}:
> FileList.append((File, File.Type))
>
> for File, FileType in FileList:
> @@ -893,7 +893,7 @@ def FindExtendTool(KeyStringList, CurrentArchList,
> NameGuid):
> for Index in range(2, -1, -1):
> for Key in list(BuildOption.keys()):
> List = Key.split('_')
> - if List[Index] == '*':
> + if List[Index] == DataType.TAB_STAR:
> for String in ToolDb[ToolList[Index]]:
> if String in [Arch,
> GenFdsGlobalVariable.TargetName,
> GenFdsGlobalVariable.ToolChainTag]:
> List[Index] = String diff --git
> a/BaseTools/Source/Python/GenFds/Section.py
> b/BaseTools/Source/Python/GenFds/Section.py
> index 19a70009dcce..bab74aedf0b9 100644
> --- a/BaseTools/Source/Python/GenFds/Section.py
> +++ b/BaseTools/Source/Python/GenFds/Section.py
> @@ -131,7 +131,7 @@ class Section (SectionClassObject):
> if File.Type == FileType or
> (int(FfsInf.PiSpecVersion, 16) >= 0x0001000A \
> and FileType ==
> 'DXE_DPEX' and File.Type ==
> BINARY_FILE_TYPE_SMM_DEPEX) \
> or (FileType ==
> BINARY_FILE_TYPE_TE and File.Type == BINARY_FILE_TYPE_PE32):
> - if '*' in FfsInf.TargetOverrideList or File.Target == '*' or
> File.Target in FfsInf.TargetOverrideList or FfsInf.TargetOverrideList == []:
> + if TAB_STAR in FfsInf.TargetOverrideList or
> + File.Target ==
> TAB_STAR or File.Target in FfsInf.TargetOverrideList or
> FfsInf.TargetOverrideList == []:
> FileList.append(FfsInf.PatchEfiFile(File.Path, File.Type))
> else:
> GenFdsGlobalVariable.InfLogger ("\nBuild
> Target \'%s\' of File %s is not in the Scope of %s specified by INF %s
> in FDF" %(File.Target, File.File, FfsInf.TargetOverrideList,
> FfsInf.InfFileName)) diff --git
> a/BaseTools/Source/Python/Workspace/DscBuildData.py
> b/BaseTools/Source/Python/Workspace/DscBuildData.py
> index 11aa63fb263c..22cbbb119a5a 100644
> --- a/BaseTools/Source/Python/Workspace/DscBuildData.py
> +++ b/BaseTools/Source/Python/Workspace/DscBuildData.py
> @@ -2315,11 +2315,11 @@ class DscBuildData(PlatformBuildClassObject):
> continue
> if Attr != "FLAGS":
> continue
> - if Target == "*" or Target == self._Target:
> - if Tag == "*" or Tag == self._Toolchain:
> + if Target == TAB_STAR or Target == self._Target:
> + if Tag == TAB_STAR or Tag == self._Toolchain:
> if 'COMMON' not in BuildOptions:
> BuildOptions['COMMON'] = set()
> - if Arch == "*":
> + if Arch == TAB_STAR:
> BuildOptions['COMMON'].add(self.BuildOptions[Options])
> if Arch in self.SupArchList:
> if Arch not in BuildOptions:
> --
> 2.16.2.windows.1
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*'
2018-12-04 1:52 ` Zhu, Yonghong
@ 2018-12-07 0:50 ` Carsey, Jaben
2018-12-07 0:53 ` Carsey, Jaben
0 siblings, 1 reply; 8+ messages in thread
From: Carsey, Jaben @ 2018-12-07 0:50 UTC (permalink / raw)
To: Zhu, Yonghong, edk2-devel@lists.01.org; +Cc: Gao, Liming
How about undo those and push the remaining? Since that's a very small change.
-Jaben
> -----Original Message-----
> From: Zhu, Yonghong
> Sent: Monday, December 3, 2018 5:53 PM
> To: Carsey, Jaben <jaben.carsey@intel.com>; edk2-devel@lists.01.org
> Cc: Gao, Liming <liming.gao@intel.com>; Zhu, Yonghong
> <yonghong.zhu@intel.com>
> Subject: RE: [Patch v1 1/1] BaseTools: create and use a standard shared
> variable for '*'
> Importance: High
>
> Yes. I prefer not to change it.
>
> Best Regards,
> Zhu Yonghong
>
>
> -----Original Message-----
> From: Carsey, Jaben
> Sent: Monday, December 03, 2018 11:19 PM
> To: Zhu, Yonghong <yonghong.zhu@intel.com>; edk2-devel@lists.01.org
> Cc: Gao, Liming <liming.gao@intel.com>
> Subject: RE: [Patch v1 1/1] BaseTools: create and use a standard shared
> variable for '*'
>
> I was trying to change all use of *, without regard to the usage of it.
>
> Do you think that mathematical * should not be changed?
>
> -Jaben
>
> > -----Original Message-----
> > From: Zhu, Yonghong
> > Sent: Sunday, December 02, 2018 6:31 PM
> > To: Carsey, Jaben <jaben.carsey@intel.com>; edk2-devel@lists.01.org
> > Cc: Gao, Liming <liming.gao@intel.com>; Zhu, Yonghong
> > <yonghong.zhu@intel.com>
> > Subject: RE: [Patch v1 1/1] BaseTools: create and use a standard
> > shared variable for '*'
> > Importance: High
> >
> > Hi Jaben,
> >
> > In this patch, it also changed the mathematics multiplicative '*'
> > (used in
> > expression) to TAB_STAR, is it by on purpose?
> > Eg:
> > - NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>',
> '<',
> > '?', ':']
> > + NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^',
> > + '~', '<<', '>>', '!', '=',
> > '>', '<', '?', ':']
> >
> > Best Regards,
> > Zhu Yonghong
> >
> > -----Original Message-----
> > From: Carsey, Jaben
> > Sent: Friday, November 16, 2018 11:40 PM
> > To: edk2-devel@lists.01.org
> > Cc: Zhu, Yonghong <yonghong.zhu@intel.com>; Gao, Liming
> > <liming.gao@intel.com>
> > Subject: [Patch v1 1/1] BaseTools: create and use a standard shared
> > variable for '*'
> >
> > add a variable for the string '*' and then use it instead of lots of '*'
> >
> > Cc: Yonghong Zhu <yonghong.zhu@intel.com>
> > Cc: Liming Gao <liming.gao@intel.com>
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
> > ---
> > BaseTools/Source/Python/AutoGen/AutoGen.py | 54 ++++++++++---
> > -------
> > BaseTools/Source/Python/AutoGen/BuildEngine.py | 10 ++--
> > BaseTools/Source/Python/BPDG/GenVpd.py | 14 ++---
> > BaseTools/Source/Python/Common/DataType.py | 1 +
> > BaseTools/Source/Python/Common/Expression.py | 4 +-
> > BaseTools/Source/Python/Common/Misc.py | 2 +-
> > BaseTools/Source/Python/Common/ToolDefClassObject.py | 23 +++++----
> > BaseTools/Source/Python/Common/VpdInfoFile.py | 8 +--
> > BaseTools/Source/Python/GenFds/FdfParser.py | 5 +-
> > BaseTools/Source/Python/GenFds/GenFds.py | 2 +-
> > BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py | 8 +--
> > BaseTools/Source/Python/GenFds/Section.py | 2 +-
> > BaseTools/Source/Python/Workspace/DscBuildData.py | 6 +--
> > 13 files changed, 70 insertions(+), 69 deletions(-)
> >
> > diff --git a/BaseTools/Source/Python/AutoGen/AutoGen.py
> > b/BaseTools/Source/Python/AutoGen/AutoGen.py
> > index f3560bfc787d..25417c447061 100644
> > --- a/BaseTools/Source/Python/AutoGen/AutoGen.py
> > +++ b/BaseTools/Source/Python/AutoGen/AutoGen.py
> > @@ -1438,7 +1438,7 @@ class PlatformAutoGen(AutoGen):
> > PcdValue = Sku.DefaultValue
> > if PcdValue == "":
> > PcdValue = Pcd.DefaultValue
> > - if Sku.VpdOffset != '*':
> > + if Sku.VpdOffset != TAB_STAR:
> > if PcdValue.startswith("{"):
> > Alignment = 8
> > elif PcdValue.startswith("L"):
> > @@ -1462,7 +1462,7 @@ class PlatformAutoGen(AutoGen):
> > VpdFile.Add(Pcd, SkuName, Sku.VpdOffset)
> > SkuValueMap[PcdValue].append(Sku)
> > # if the offset of a VPD is *, then it need
> > to be fixed up by third party tool.
> > - if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
> > + if not NeedProcessVpdMapFile and
> > + Sku.VpdOffset ==
> > TAB_STAR:
> > NeedProcessVpdMapFile = True
> > if self.Platform.VpdToolGuid is None or
> > self.Platform.VpdToolGuid == '':
> > EdkLogger.error("Build",
> > FILE_NOT_FOUND, \ @@ -1522,7
> > +1522,7 @@ class PlatformAutoGen(AutoGen):
> > PcdValue = Sku.DefaultValue
> > if PcdValue == "":
> > PcdValue = DscPcdEntry.DefaultValue
> > - if Sku.VpdOffset != '*':
> > + if Sku.VpdOffset != TAB_STAR:
> > if PcdValue.startswith("{"):
> > Alignment = 8
> > elif PcdValue.startswith("L"):
> > @@ -1545,7 +1545,7 @@ class PlatformAutoGen(AutoGen):
> > SkuValueMap[PcdValue] = []
> > VpdFile.Add(DscPcdEntry, SkuName, Sku.VpdOffset)
> > SkuValueMap[PcdValue].append(Sku)
> > - if not NeedProcessVpdMapFile and Sku.VpdOffset ==
> "*":
> > + if not NeedProcessVpdMapFile and
> > + Sku.VpdOffset ==
> > TAB_STAR:
> > NeedProcessVpdMapFile = True
> > if DscPcdEntry.DatumType == TAB_VOID and
> > PcdValue.startswith("L"):
> > UnicodePcdArray.add(DscPcdEntry) @@
> > -1573,7 +1573,7 @@ class PlatformAutoGen(AutoGen):
> > if os.path.exists(VpdMapFilePath):
> > VpdFile.Read(VpdMapFilePath)
> >
> > - # Fixup "*" offset
> > + # Fixup TAB_STAR offset
> > for pcd in VpdSkuMap:
> > vpdinfo = VpdFile.GetVpdInfo(pcd)
> > if vpdinfo is None:
> > @@ -2210,15 +2210,15 @@ class PlatformAutoGen(AutoGen):
> > def CalculatePriorityValue(self, Key):
> > Target, ToolChain, Arch, CommandType, Attr = Key.split('_')
> > PriorityValue = 0x11111
> > - if Target == "*":
> > + if Target == TAB_STAR:
> > PriorityValue &= 0x01111
> > - if ToolChain == "*":
> > + if ToolChain == TAB_STAR:
> > PriorityValue &= 0x10111
> > - if Arch == "*":
> > + if Arch == TAB_STAR:
> > PriorityValue &= 0x11011
> > - if CommandType == "*":
> > + if CommandType == TAB_STAR:
> > PriorityValue &= 0x11101
> > - if Attr == "*":
> > + if Attr == TAB_STAR:
> > PriorityValue &= 0x11110
> >
> > return self.PrioList["0x%0.5x" % PriorityValue] @@ -2253,9
> > +2253,9 @@ class PlatformAutoGen(AutoGen):
> > if (Key[0] == self.BuildRuleFamily and
> > (ModuleStyle is None or len(Key) < 3 or (len(Key) > 2
> > and Key[2] ==
> > ModuleStyle))):
> > Target, ToolChain, Arch, CommandType, Attr = Key[1].split('_')
> > - if (Target == self.BuildTarget or Target == "*") and\
> > - (ToolChain == self.ToolChain or ToolChain == "*") and\
> > - (Arch == self.Arch or Arch == "*") and\
> > + if (Target == self.BuildTarget or Target == TAB_STAR) and\
> > + (ToolChain == self.ToolChain or ToolChain == TAB_STAR) and\
> > + (Arch == self.Arch or Arch == TAB_STAR) and\
> > Options[Key].startswith("="):
> >
> > if OverrideList.get(Key[1]) is not None:
> > @@ -2276,11 +2276,11 @@ class PlatformAutoGen(AutoGen):
> > # Compare two Key, if one is included by another,
> > choose the higher priority one
> > #
> > Target2, ToolChain2, Arch2, CommandType2, Attr2 =
> > NextKey.split("_")
> > - if (Target1 == Target2 or Target1 == "*" or Target2 == "*") and\
> > - (ToolChain1 == ToolChain2 or ToolChain1 == "*" or
> ToolChain2
> > == "*") and\
> > - (Arch1 == Arch2 or Arch1 == "*" or Arch2 == "*") and\
> > - (CommandType1 == CommandType2 or CommandType1 ==
> "*"
> > or CommandType2 == "*") and\
> > - (Attr1 == Attr2 or Attr1 == "*" or Attr2 == "*"):
> > + if (Target1 == Target2 or Target1 == TAB_STAR or
> > + Target2 ==
> > TAB_STAR) and\
> > + (ToolChain1 == ToolChain2 or ToolChain1 ==
> > + TAB_STAR or
> > ToolChain2 == TAB_STAR) and\
> > + (Arch1 == Arch2 or Arch1 == TAB_STAR or Arch2
> > + == TAB_STAR)
> > and\
> > + (CommandType1 == CommandType2 or CommandType1
> > + ==
> > TAB_STAR or CommandType2 == TAB_STAR) and\
> > + (Attr1 == Attr2 or Attr1 == TAB_STAR or Attr2 == TAB_STAR):
> >
> > if self.CalculatePriorityValue(NowKey) >
> > self.CalculatePriorityValue(NextKey):
> > if Options.get((self.BuildRuleFamily, NextKey)) is not None:
> > @@ -2309,9 +2309,9 @@ class PlatformAutoGen(AutoGen):
> > continue
> > FamilyMatch = True
> > # expand any wildcard
> > - if Target == "*" or Target == self.BuildTarget:
> > - if Tag == "*" or Tag == self.ToolChain:
> > - if Arch == "*" or Arch == self.Arch:
> > + if Target == TAB_STAR or Target == self.BuildTarget:
> > + if Tag == TAB_STAR or Tag == self.ToolChain:
> > + if Arch == TAB_STAR or Arch == self.Arch:
> > if Tool not in BuildOptions:
> > BuildOptions[Tool] = {}
> > if Attr != "FLAGS" or Attr not in
> > BuildOptions[Tool] or
> > Options[Key].startswith('='):
> > @@ -2344,9 +2344,9 @@ class PlatformAutoGen(AutoGen):
> > continue
> >
> > # expand any wildcard
> > - if Target == "*" or Target == self.BuildTarget:
> > - if Tag == "*" or Tag == self.ToolChain:
> > - if Arch == "*" or Arch == self.Arch:
> > + if Target == TAB_STAR or Target == self.BuildTarget:
> > + if Tag == TAB_STAR or Tag == self.ToolChain:
> > + if Arch == TAB_STAR or Arch == self.Arch:
> > if Tool not in BuildOptions:
> > BuildOptions[Tool] = {}
> > if Attr != "FLAGS" or Attr not in
> > BuildOptions[Tool] or
> > Options[Key].startswith('='):
> > @@ -2971,8 +2971,8 @@ class ModuleAutoGen(AutoGen):
> > @cached_property
> > def SourceFileList(self):
> > RetVal = []
> > - ToolChainTagSet = {"", "*", self.ToolChain}
> > - ToolChainFamilySet = {"", "*", self.ToolChainFamily,
> > self.BuildRuleFamily}
> > + ToolChainTagSet = {"", TAB_STAR, self.ToolChain}
> > + ToolChainFamilySet = {"", TAB_STAR, self.ToolChainFamily,
> > + self.BuildRuleFamily}
> > for F in self.Module.Sources:
> > # match tool chain
> > if F.TagName not in ToolChainTagSet:
> > @@ -3047,7 +3047,7 @@ class ModuleAutoGen(AutoGen):
> > def BinaryFileList(self):
> > RetVal = []
> > for F in self.Module.Binaries:
> > - if F.Target not in [TAB_ARCH_COMMON, '*'] and F.Target !=
> > self.BuildTarget:
> > + if F.Target not in [TAB_ARCH_COMMON, TAB_STAR] and
> > + F.Target !=
> > self.BuildTarget:
> > continue
> > RetVal.append(F)
> > self._ApplyBuildRule(F, F.Type, BinaryFileList=RetVal)
> > diff --git a/BaseTools/Source/Python/AutoGen/BuildEngine.py
> > b/BaseTools/Source/Python/AutoGen/BuildEngine.py
> > index ac7a6687552c..f9e3ac3a1daf 100644
> > --- a/BaseTools/Source/Python/AutoGen/BuildEngine.py
> > +++ b/BaseTools/Source/Python/AutoGen/BuildEngine.py
> > @@ -110,7 +110,7 @@ class FileBuildRule:
> > self.IncListFileMacro = self.INC_LIST_MACRO
> >
> > self.SourceFileType = Type
> > - # source files listed not in "*" or "?" pattern format
> > + # source files listed not in TAB_STAR or "?" pattern format
> > if not ExtraDependency:
> > self.ExtraSourceFileList = []
> > else:
> > @@ -150,12 +150,12 @@ class FileBuildRule:
> > self.SourceFileExtList = set()
> > for File in Input:
> > Base, Ext = os.path.splitext(File)
> > - if Base.find("*") >= 0:
> > - # There's "*" in the file name
> > + if Base.find(TAB_STAR) >= 0:
> > + # There's TAB_STAR in the file name
> > self.IsMultipleInput = True
> > self.GenFileListMacro = True
> > elif Base.find("?") < 0:
> > - # There's no "*" and "?" in file name
> > + # There's no TAB_STAR and "?" in file name
> > self.ExtraSourceFileList.append(File)
> > continue
> > self.SourceFileExtList.add(Ext) @@ -553,7 +553,7 @@ class
> BuildRule:
> > #
> > # @param FileExt The extension of a file
> > # @param ToolChainFamily The tool chain family name
> > - # @param BuildVersion The build version number. "*" means any
> > rule
> > + # @param BuildVersion The build version number. TAB_STAR
> means
> > any rule
> > # is applicalbe.
> > #
> > # @retval FileType The file type string
> > diff --git a/BaseTools/Source/Python/BPDG/GenVpd.py
> > b/BaseTools/Source/Python/BPDG/GenVpd.py
> > index d7852d29eed0..e5da47f95e63 100644
> > --- a/BaseTools/Source/Python/BPDG/GenVpd.py
> > +++ b/BaseTools/Source/Python/BPDG/GenVpd.py
> > @@ -21,7 +21,7 @@ import array
> > import re
> > from Common.LongFilePathSupport import OpenLongFilePath as open
> from
> > struct import * -from Common.DataType import MAX_SIZE_TYPE,
> > MAX_VAL_TYPE
> > +from Common.DataType import MAX_SIZE_TYPE, MAX_VAL_TYPE,
> > TAB_STAR
> > import Common.EdkLogger as EdkLogger
> > import Common.BuildToolError as BuildToolError
> >
> > @@ -87,7 +87,7 @@ class PcdEntry:
> > # for both hexadecimal and decimal.
> > #
> > def _GenOffsetValue(self):
> > - if self.PcdOffset != "*" :
> > + if self.PcdOffset != TAB_STAR:
> > try:
> > self.PcdBinOffset = int (self.PcdOffset)
> > except:
> > @@ -423,7 +423,7 @@ class GenVPD :
> > Alignment = 1
> >
> > PCD.Alignment = Alignment
> > - if PCD.PcdOffset != '*':
> > + if PCD.PcdOffset != TAB_STAR:
> > if PCD.PcdOccupySize % Alignment != 0:
> > if PCD.PcdUnpackValue.startswith("{"):
> > EdkLogger.warn("BPDG", "The offset value
> > of PCD %s is not 8- byte aligned!" %(PCD.PcdCName),
> > File=self.InputFileName) @@ -469,7
> > +469,7 @@ class GenVPD :
> > def FormatFileLine (self) :
> >
> > for eachPcd in self.FileLinesList :
> > - if eachPcd.PcdOffset != '*' :
> > + if eachPcd.PcdOffset != TAB_STAR :
> > # Use pcd's Offset value as key, and pcd's Value as value
> > self.PcdFixedOffsetSizeList.append(eachPcd)
> > else :
> > @@ -484,7 +484,7 @@ class GenVPD :
> > def FixVpdOffset (self):
> > # At first, the offset should start at 0
> > # Sort fixed offset list in order to find out where has free
> > spaces for the pcd's offset
> > - # value is "*" to insert into.
> > + # value is TAB_STAR to insert into.
> >
> > self.PcdFixedOffsetSizeList.sort(key=lambda x:
> > x.PcdBinOffset)
> >
> > @@ -502,7 +502,7 @@ class GenVPD :
> > self.PcdUnknownOffsetList[index+i -1 ],
> > self.PcdUnknownOffsetList[index+i] =
> > self.PcdUnknownOffsetList[index+i],
> > self.PcdUnknownOffsetList[index+i -1]
> >
> > #
> > - # Process all Offset value are "*"
> > + # Process all Offset value are TAB_STAR
> > #
> > if (len(self.PcdFixedOffsetSizeList) == 0) and
> > (len(self.PcdUnknownOffsetList) != 0) :
> > # The offset start from 0 @@ -571,7 +571,7 @@ class
> > GenVPD :
> > eachUnfixedPcd =
> > self.PcdUnknownOffsetList[countOfUnfixedList]
> > needFixPcdSize = eachUnfixedPcd.PcdOccupySize
> > # Not been fixed
> > - if eachUnfixedPcd.PcdOffset == '*' :
> > + if eachUnfixedPcd.PcdOffset == TAB_STAR :
> > if LastOffset % eachUnfixedPcd.Alignment != 0:
> > LastOffset = (LastOffset /
> > eachUnfixedPcd.Alignment + 1) * eachUnfixedPcd.Alignment
> > # The offset un-fixed pcd can write into
> > this free space diff -- git
> > a/BaseTools/Source/Python/Common/DataType.py
> > b/BaseTools/Source/Python/Common/DataType.py
> > index 1d1d22faa40b..6b375712b65e 100644
> > --- a/BaseTools/Source/Python/Common/DataType.py
> > +++ b/BaseTools/Source/Python/Common/DataType.py
> > @@ -31,6 +31,7 @@ TAB_OPTION_START = '<'
> > TAB_OPTION_END = '>'
> > TAB_SLASH = '\\'
> > TAB_BACK_SLASH = '/'
> > +TAB_STAR = '*'
> > TAB_LINE_BREAK = '\n'
> > TAB_PRINTCHAR_VT = '\x0b'
> > TAB_PRINTCHAR_BS = '\b'
> > diff --git a/BaseTools/Source/Python/Common/Expression.py
> > b/BaseTools/Source/Python/Common/Expression.py
> > index a21ab5daa73e..db1310d534fb 100644
> > --- a/BaseTools/Source/Python/Common/Expression.py
> > +++ b/BaseTools/Source/Python/Common/Expression.py
> > @@ -244,7 +244,7 @@ class ValueExpression(BaseExpression):
> > 'IN' : 'in'
> > }
> >
> > - NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>',
> '<',
> > '?', ':']
> > + NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^',
> > + '~', '<<', '>>', '!', '=', '>', '<', '?', ':']
> >
> >
> > SymbolPattern = re.compile("("
> > @@ -498,7 +498,7 @@ class ValueExpression(BaseExpression):
> >
> > # A [ * B]*
> > def _MulExpr(self):
> > - return self._ExprFuncTemplate(self._UnaryExpr, {"*", "/", "%"})
> > + return self._ExprFuncTemplate(self._UnaryExpr, {TAB_STAR,
> > + "/",
> > + "%"})
> >
> > # [!]*A
> > def _UnaryExpr(self):
> > diff --git a/BaseTools/Source/Python/Common/Misc.py
> > b/BaseTools/Source/Python/Common/Misc.py
> > index 3b8efb2e7179..61ba79241fb6 100644
> > --- a/BaseTools/Source/Python/Common/Misc.py
> > +++ b/BaseTools/Source/Python/Common/Misc.py
> > @@ -1088,7 +1088,7 @@ class tdict:
> > _ListType = type([])
> > _TupleType = type(())
> > _Wildcard = 'COMMON'
> > - _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', '*', 'PLATFORM']
> > + _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', TAB_STAR,
> > + 'PLATFORM']
> >
> > def __init__(self, _Single_=False, _Level_=2):
> > self._Level_ = _Level_
> > diff --git a/BaseTools/Source/Python/Common/ToolDefClassObject.py
> > b/BaseTools/Source/Python/Common/ToolDefClassObject.py
> > index 05a1ddfbcc89..186d279840c1 100644
> > --- a/BaseTools/Source/Python/Common/ToolDefClassObject.py
> > +++ b/BaseTools/Source/Python/Common/ToolDefClassObject.py
> > @@ -29,7 +29,8 @@ from Common import GlobalData from
> > Common.MultipleWorkspace import MultipleWorkspace as mws from
> > .DataType import TAB_TOD_DEFINES_TARGET,
> > TAB_TOD_DEFINES_TOOL_CHAIN_TAG,\
> > TAB_TOD_DEFINES_TARGET_ARCH,
> > TAB_TOD_DEFINES_COMMAND_TYPE\
> > - , TAB_TOD_DEFINES_FAMILY,
> > TAB_TOD_DEFINES_BUILDRULEFAMILY
> > + , TAB_TOD_DEFINES_FAMILY,
> > TAB_TOD_DEFINES_BUILDRULEFAMILY,\
> > + TAB_STAR, TAB_TAT_DEFINES_TOOL_CHAIN_CONF
> >
> >
> > ##
> > @@ -97,7 +98,7 @@ class ToolDefClassObject(object):
> > # adding/removing items from the original dict.
> > for Key in list(self.ToolsDefTxtDictionary.keys()):
> > List = Key.split('_')
> > - if List[Index] == '*':
> > + if List[Index] == TAB_STAR:
> > for String in self.ToolsDefTxtDatabase[KeyList[Index]]:
> > List[Index] = String
> > NewKey = '%s_%s_%s_%s_%s' % tuple(List) @@
> > -202,20 +203,20 @@ class ToolDefClassObject(object):
> > if len(List) != 5:
> > EdkLogger.verbose("Line %d: Not a valid name of
> > definition: %s" % ((Index + 1), Name))
> > continue
> > - elif List[4] == '*':
> > + elif List[4] == TAB_STAR:
> > EdkLogger.verbose("Line %d: '*' is not allowed in
> > last field: %s" % ((Index + 1), Name))
> > continue
> > else:
> > self.ToolsDefTxtDictionary[Name] = Value
> > - if List[0] != '*':
> > + if List[0] != TAB_STAR:
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET]
> > += [List[0]]
> > - if List[1] != '*':
> > + if List[1] != TAB_STAR:
> >
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TOOL_CHAIN_TAG]
> > += [List[1]]
> > - if List[2] != '*':
> > + if List[2] != TAB_STAR:
> >
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET_ARCH] += [List[2]]
> > - if List[3] != '*':
> > + if List[3] != TAB_STAR:
> >
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_COMMAND_TYPE]
> > += [List[3]]
> > - if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] == '*' and
> List[3]
> > == '*':
> > + if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] ==
> > + TAB_STAR
> > and List[3] == TAB_STAR:
> > if TAB_TOD_DEFINES_FAMILY not in self.ToolsDefTxtDatabase:
> >
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY] = {}
> >
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]] = Value @@
> -226,7 +227,7 @@ class ToolDefClassObject(object):
> >
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_BUILDRULEFAMILY][List[1]] =
> > Value
> > elif
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]]
> > != Value:
> > EdkLogger.verbose("Line %d: No override
> > allowed for the family of a tool chain: %s" % ((Index + 1), Name))
> > - if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and List[2] ==
> '*'
> > and List[3] == '*':
> > + if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and
> > + List[2] ==
> > TAB_STAR and List[3] == TAB_STAR:
> > if TAB_TOD_DEFINES_BUILDRULEFAMILY not in
> > self.ToolsDefTxtDatabase \
> > or List[1] not in
> > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY]:
> > EdkLogger.verbose("Line %d: The family is not
> > specified, but BuildRuleFamily is specified for the tool chain: %s" %
> > ((Index + 1), Name)) @@ -270,8 +271,8 @@ class
> ToolDefClassObject(object):
> > def ToolDefDict(ConfDir):
> > Target = TargetTxtDict(ConfDir)
> > ToolDef = ToolDefClassObject()
> > - if DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CONF in
> > Target.TargetTxtDictionary:
> > - ToolsDefFile =
> >
> Target.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CON
> > F]
> > + if TAB_TAT_DEFINES_TOOL_CHAIN_CONF in Target.TargetTxtDictionary:
> > + ToolsDefFile =
> > + Target.TargetTxtDictionary[TAB_TAT_DEFINES_TOOL_CHAIN_CONF]
> > if ToolsDefFile:
> > ToolDef.LoadToolDefFile(os.path.normpath(ToolsDefFile))
> > else:
> > diff --git a/BaseTools/Source/Python/Common/VpdInfoFile.py
> > b/BaseTools/Source/Python/Common/VpdInfoFile.py
> > index 2fb8e66fe99c..3be0670e36fb 100644
> > --- a/BaseTools/Source/Python/Common/VpdInfoFile.py
> > +++ b/BaseTools/Source/Python/Common/VpdInfoFile.py
> > @@ -57,7 +57,7 @@ FILE_COMMENT_TEMPLATE = \
> > # <PcdName> ::= <TokenSpaceCName> "." <PcdCName>
> > # <TokenSpaceCName> ::= C Variable Name of the Token Space GUID
> > # <PcdCName> ::= C Variable Name of the PCD
> > -# <Offset> ::= {"*"} {<HexNumber>}
> > +# <Offset> ::= {TAB_STAR} {<HexNumber>}
> > # <HexNumber> ::= "0x" (a-fA-F0-9){1,8}
> > # <Size> ::= <HexNumber>
> > # <Value> ::= {<HexNumber>} {<NonNegativeInt>} {<QString>}
> > {<Array>}
> > @@ -92,7 +92,7 @@ class VpdInfoFile:
> > if (Vpd is None):
> > EdkLogger.error("VpdInfoFile",
> > BuildToolError.ATTRIBUTE_UNKNOWN_ERROR, "Invalid VPD PCD entry.")
> >
> > - if not (Offset >= 0 or Offset == "*"):
> > + if not (Offset >= 0 or Offset == TAB_STAR):
> > EdkLogger.error("VpdInfoFile",
> > BuildToolError.PARAMETER_INVALID, "Invalid offset parameter: %s." %
> > Offset)
> >
> > if Vpd.DatumType == TAB_VOID:
> > @@ -186,8 +186,8 @@ class VpdInfoFile:
> > VpdObjectTokenCName = PcdItem[0]
> > for sku in VpdObject.SkuInfoList:
> > if VpdObject.TokenSpaceGuidCName ==
> > TokenSpaceName and VpdObjectTokenCName == PcdTokenName.strip()
> and sku == SkuId:
> > - if self._VpdArray[VpdObject][sku] == "*":
> > - if Offset == "*":
> > + if self._VpdArray[VpdObject][sku] == TAB_STAR:
> > + if Offset == TAB_STAR:
> > EdkLogger.error("BPDG",
> > BuildToolError.FORMAT_INVALID, "The offset of %s has not been fixed up
> > by third-party BPDG tool." %
> > PcdName)
> > self._VpdArray[VpdObject][sku] = Offset
> > Found = True
> > diff --git a/BaseTools/Source/Python/GenFds/FdfParser.py
> > b/BaseTools/Source/Python/GenFds/FdfParser.py
> > index 44cc8f63d07b..cedc4ea0c122 100644
> > --- a/BaseTools/Source/Python/GenFds/FdfParser.py
> > +++ b/BaseTools/Source/Python/GenFds/FdfParser.py
> > @@ -64,7 +64,6 @@ T_CHAR_CR = '\r'
> > T_CHAR_TAB = '\t'
> > T_CHAR_DOUBLE_QUOTE = '\"'
> > T_CHAR_SINGLE_QUOTE = '\''
> > -T_CHAR_STAR = '*'
> > T_CHAR_BRACE_R = '}'
> >
> > SEPARATORS = {TAB_EQUAL_SPLIT, TAB_VALUE_SPLIT,
> TAB_COMMA_SPLIT, '{',
> > T_CHAR_BRACE_R} @@ -533,7 +532,7 @@ class
> > FdfParser:
> > InComment = False
> > HashComment = False
> > # check for */ comment end
> > - elif InComment and not DoubleSlashComment and not
> HashComment
> > and self._CurrentChar() == T_CHAR_STAR and self._NextChar() ==
> > TAB_BACK_SLASH:
> > + elif InComment and not DoubleSlashComment and not
> > HashComment and self._CurrentChar() == TAB_STAR and self._NextChar()
> > == TAB_BACK_SLASH:
> > self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> > self._GetOneChar()
> > self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> > @@ -552,7 +551,7 @@ class FdfParser:
> > InComment = True
> > HashComment = True
> > # check for /* comment start
> > - elif self._CurrentChar() == TAB_BACK_SLASH and self._NextChar()
> ==
> > T_CHAR_STAR:
> > + elif self._CurrentChar() == TAB_BACK_SLASH and
> > + self._NextChar() ==
> > TAB_STAR:
> > self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> > self._GetOneChar()
> > self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> > diff --git a/BaseTools/Source/Python/GenFds/GenFds.py
> > b/BaseTools/Source/Python/GenFds/GenFds.py
> > index 0c8091b79841..0513f488fca3 100644
> > --- a/BaseTools/Source/Python/GenFds/GenFds.py
> > +++ b/BaseTools/Source/Python/GenFds/GenFds.py
> > @@ -653,7 +653,7 @@ class GenFds(object):
> > FileGuidList.append(FileStatementGuid)
> > Name = []
> > FfsPath = os.path.join(GenFdsGlobalVariable.FvDir, 'Ffs')
> > - FfsPath = glob(os.path.join(FfsPath, FileStatementGuid) + '*')
> > + FfsPath = glob(os.path.join(FfsPath,
> > + FileStatementGuid) + TAB_STAR)
> > if not FfsPath:
> > continue
> > if not os.path.exists(FfsPath[0]):
> > diff --git a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> > b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> > index ea61f723a73c..0812c56bdae8 100644
> > --- a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> > +++ b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> > @@ -217,12 +217,12 @@ class GenFdsGlobalVariable:
> >
> > if not Inf.IsBinaryModule:
> > for File in Inf.Sources:
> > - if File.TagName in {"", "*", GenFdsGlobalVariable.ToolChainTag}
> and
> > \
> > - File.ToolChainFamily in {"", "*",
> > GenFdsGlobalVariable.ToolChainFamily}:
> > + if File.TagName in {"", DataType.TAB_STAR,
> > GenFdsGlobalVariable.ToolChainTag} and \
> > + File.ToolChainFamily in {"", DataType.TAB_STAR,
> > GenFdsGlobalVariable.ToolChainFamily}:
> > FileList.append((File,
> > DataType.TAB_UNKNOWN_FILE))
> >
> > for File in Inf.Binaries:
> > - if File.Target in {DataType.TAB_COMMON, '*',
> > GenFdsGlobalVariable.TargetName}:
> > + if File.Target in {DataType.TAB_COMMON,
> > + DataType.TAB_STAR,
> > GenFdsGlobalVariable.TargetName}:
> > FileList.append((File, File.Type))
> >
> > for File, FileType in FileList:
> > @@ -893,7 +893,7 @@ def FindExtendTool(KeyStringList, CurrentArchList,
> > NameGuid):
> > for Index in range(2, -1, -1):
> > for Key in list(BuildOption.keys()):
> > List = Key.split('_')
> > - if List[Index] == '*':
> > + if List[Index] == DataType.TAB_STAR:
> > for String in ToolDb[ToolList[Index]]:
> > if String in [Arch,
> > GenFdsGlobalVariable.TargetName,
> > GenFdsGlobalVariable.ToolChainTag]:
> > List[Index] = String diff --git
> > a/BaseTools/Source/Python/GenFds/Section.py
> > b/BaseTools/Source/Python/GenFds/Section.py
> > index 19a70009dcce..bab74aedf0b9 100644
> > --- a/BaseTools/Source/Python/GenFds/Section.py
> > +++ b/BaseTools/Source/Python/GenFds/Section.py
> > @@ -131,7 +131,7 @@ class Section (SectionClassObject):
> > if File.Type == FileType or
> > (int(FfsInf.PiSpecVersion, 16) >= 0x0001000A \
> > and FileType ==
> > 'DXE_DPEX' and File.Type ==
> > BINARY_FILE_TYPE_SMM_DEPEX) \
> > or (FileType ==
> > BINARY_FILE_TYPE_TE and File.Type == BINARY_FILE_TYPE_PE32):
> > - if '*' in FfsInf.TargetOverrideList or File.Target == '*' or
> > File.Target in FfsInf.TargetOverrideList or FfsInf.TargetOverrideList == []:
> > + if TAB_STAR in FfsInf.TargetOverrideList or
> > + File.Target ==
> > TAB_STAR or File.Target in FfsInf.TargetOverrideList or
> > FfsInf.TargetOverrideList == []:
> > FileList.append(FfsInf.PatchEfiFile(File.Path, File.Type))
> > else:
> > GenFdsGlobalVariable.InfLogger ("\nBuild
> > Target \'%s\' of File %s is not in the Scope of %s specified by INF %s
> > in FDF" %(File.Target, File.File, FfsInf.TargetOverrideList,
> > FfsInf.InfFileName)) diff --git
> > a/BaseTools/Source/Python/Workspace/DscBuildData.py
> > b/BaseTools/Source/Python/Workspace/DscBuildData.py
> > index 11aa63fb263c..22cbbb119a5a 100644
> > --- a/BaseTools/Source/Python/Workspace/DscBuildData.py
> > +++ b/BaseTools/Source/Python/Workspace/DscBuildData.py
> > @@ -2315,11 +2315,11 @@ class DscBuildData(PlatformBuildClassObject):
> > continue
> > if Attr != "FLAGS":
> > continue
> > - if Target == "*" or Target == self._Target:
> > - if Tag == "*" or Tag == self._Toolchain:
> > + if Target == TAB_STAR or Target == self._Target:
> > + if Tag == TAB_STAR or Tag == self._Toolchain:
> > if 'COMMON' not in BuildOptions:
> > BuildOptions['COMMON'] = set()
> > - if Arch == "*":
> > + if Arch == TAB_STAR:
> > BuildOptions['COMMON'].add(self.BuildOptions[Options])
> > if Arch in self.SupArchList:
> > if Arch not in BuildOptions:
> > --
> > 2.16.2.windows.1
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [Patch v1 1/1] BaseTools: create and use a standard shared variable for '*'
2018-12-07 0:50 ` Carsey, Jaben
@ 2018-12-07 0:53 ` Carsey, Jaben
0 siblings, 0 replies; 8+ messages in thread
From: Carsey, Jaben @ 2018-12-07 0:53 UTC (permalink / raw)
To: Carsey, Jaben, Zhu, Yonghong, edk2-devel@lists.01.org
Cc: Gao, Liming, Feng, Bob C
I will submit a new change with those changed back.
-Jaben
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Carsey, Jaben
> Sent: Thursday, December 6, 2018 4:50 PM
> To: Zhu, Yonghong <yonghong.zhu@intel.com>; edk2-devel@lists.01.org
> Cc: Gao, Liming <liming.gao@intel.com>
> Subject: Re: [edk2] [Patch v1 1/1] BaseTools: create and use a standard
> shared variable for '*'
> Importance: High
>
> How about undo those and push the remaining? Since that's a very small
> change.
>
> -Jaben
>
> > -----Original Message-----
> > From: Zhu, Yonghong
> > Sent: Monday, December 3, 2018 5:53 PM
> > To: Carsey, Jaben <jaben.carsey@intel.com>; edk2-devel@lists.01.org
> > Cc: Gao, Liming <liming.gao@intel.com>; Zhu, Yonghong
> > <yonghong.zhu@intel.com>
> > Subject: RE: [Patch v1 1/1] BaseTools: create and use a standard
> > shared variable for '*'
> > Importance: High
> >
> > Yes. I prefer not to change it.
> >
> > Best Regards,
> > Zhu Yonghong
> >
> >
> > -----Original Message-----
> > From: Carsey, Jaben
> > Sent: Monday, December 03, 2018 11:19 PM
> > To: Zhu, Yonghong <yonghong.zhu@intel.com>; edk2-devel@lists.01.org
> > Cc: Gao, Liming <liming.gao@intel.com>
> > Subject: RE: [Patch v1 1/1] BaseTools: create and use a standard
> > shared variable for '*'
> >
> > I was trying to change all use of *, without regard to the usage of it.
> >
> > Do you think that mathematical * should not be changed?
> >
> > -Jaben
> >
> > > -----Original Message-----
> > > From: Zhu, Yonghong
> > > Sent: Sunday, December 02, 2018 6:31 PM
> > > To: Carsey, Jaben <jaben.carsey@intel.com>; edk2-devel@lists.01.org
> > > Cc: Gao, Liming <liming.gao@intel.com>; Zhu, Yonghong
> > > <yonghong.zhu@intel.com>
> > > Subject: RE: [Patch v1 1/1] BaseTools: create and use a standard
> > > shared variable for '*'
> > > Importance: High
> > >
> > > Hi Jaben,
> > >
> > > In this patch, it also changed the mathematics multiplicative '*'
> > > (used in
> > > expression) to TAB_STAR, is it by on purpose?
> > > Eg:
> > > - NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>',
> > '<',
> > > '?', ':']
> > > + NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^',
> > > + '~', '<<', '>>', '!', '=',
> > > '>', '<', '?', ':']
> > >
> > > Best Regards,
> > > Zhu Yonghong
> > >
> > > -----Original Message-----
> > > From: Carsey, Jaben
> > > Sent: Friday, November 16, 2018 11:40 PM
> > > To: edk2-devel@lists.01.org
> > > Cc: Zhu, Yonghong <yonghong.zhu@intel.com>; Gao, Liming
> > > <liming.gao@intel.com>
> > > Subject: [Patch v1 1/1] BaseTools: create and use a standard shared
> > > variable for '*'
> > >
> > > add a variable for the string '*' and then use it instead of lots of '*'
> > >
> > > Cc: Yonghong Zhu <yonghong.zhu@intel.com>
> > > Cc: Liming Gao <liming.gao@intel.com>
> > > Contributed-under: TianoCore Contribution Agreement 1.1
> > > Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
> > > ---
> > > BaseTools/Source/Python/AutoGen/AutoGen.py | 54 ++++++++++-
> --
> > > -------
> > > BaseTools/Source/Python/AutoGen/BuildEngine.py | 10 ++--
> > > BaseTools/Source/Python/BPDG/GenVpd.py | 14 ++---
> > > BaseTools/Source/Python/Common/DataType.py | 1 +
> > > BaseTools/Source/Python/Common/Expression.py | 4 +-
> > > BaseTools/Source/Python/Common/Misc.py | 2 +-
> > > BaseTools/Source/Python/Common/ToolDefClassObject.py | 23 +++++-
> ---
> > > BaseTools/Source/Python/Common/VpdInfoFile.py | 8 +--
> > > BaseTools/Source/Python/GenFds/FdfParser.py | 5 +-
> > > BaseTools/Source/Python/GenFds/GenFds.py | 2 +-
> > > BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py | 8 +--
> > > BaseTools/Source/Python/GenFds/Section.py | 2 +-
> > > BaseTools/Source/Python/Workspace/DscBuildData.py | 6 +--
> > > 13 files changed, 70 insertions(+), 69 deletions(-)
> > >
> > > diff --git a/BaseTools/Source/Python/AutoGen/AutoGen.py
> > > b/BaseTools/Source/Python/AutoGen/AutoGen.py
> > > index f3560bfc787d..25417c447061 100644
> > > --- a/BaseTools/Source/Python/AutoGen/AutoGen.py
> > > +++ b/BaseTools/Source/Python/AutoGen/AutoGen.py
> > > @@ -1438,7 +1438,7 @@ class PlatformAutoGen(AutoGen):
> > > PcdValue = Sku.DefaultValue
> > > if PcdValue == "":
> > > PcdValue = Pcd.DefaultValue
> > > - if Sku.VpdOffset != '*':
> > > + if Sku.VpdOffset != TAB_STAR:
> > > if PcdValue.startswith("{"):
> > > Alignment = 8
> > > elif PcdValue.startswith("L"):
> > > @@ -1462,7 +1462,7 @@ class PlatformAutoGen(AutoGen):
> > > VpdFile.Add(Pcd, SkuName, Sku.VpdOffset)
> > > SkuValueMap[PcdValue].append(Sku)
> > > # if the offset of a VPD is *, then it need
> > > to be fixed up by third party tool.
> > > - if not NeedProcessVpdMapFile and Sku.VpdOffset == "*":
> > > + if not NeedProcessVpdMapFile and
> > > + Sku.VpdOffset ==
> > > TAB_STAR:
> > > NeedProcessVpdMapFile = True
> > > if self.Platform.VpdToolGuid is None or
> > > self.Platform.VpdToolGuid == '':
> > > EdkLogger.error("Build",
> > > FILE_NOT_FOUND, \ @@ -1522,7
> > > +1522,7 @@ class PlatformAutoGen(AutoGen):
> > > PcdValue = Sku.DefaultValue
> > > if PcdValue == "":
> > > PcdValue = DscPcdEntry.DefaultValue
> > > - if Sku.VpdOffset != '*':
> > > + if Sku.VpdOffset != TAB_STAR:
> > > if PcdValue.startswith("{"):
> > > Alignment = 8
> > > elif PcdValue.startswith("L"):
> > > @@ -1545,7 +1545,7 @@ class PlatformAutoGen(AutoGen):
> > > SkuValueMap[PcdValue] = []
> > > VpdFile.Add(DscPcdEntry, SkuName, Sku.VpdOffset)
> > > SkuValueMap[PcdValue].append(Sku)
> > > - if not NeedProcessVpdMapFile and Sku.VpdOffset ==
> > "*":
> > > + if not NeedProcessVpdMapFile and
> > > + Sku.VpdOffset ==
> > > TAB_STAR:
> > > NeedProcessVpdMapFile = True
> > > if DscPcdEntry.DatumType == TAB_VOID
> > > and
> > > PcdValue.startswith("L"):
> > > UnicodePcdArray.add(DscPcdEntry) @@
> > > -1573,7 +1573,7 @@ class PlatformAutoGen(AutoGen):
> > > if os.path.exists(VpdMapFilePath):
> > > VpdFile.Read(VpdMapFilePath)
> > >
> > > - # Fixup "*" offset
> > > + # Fixup TAB_STAR offset
> > > for pcd in VpdSkuMap:
> > > vpdinfo = VpdFile.GetVpdInfo(pcd)
> > > if vpdinfo is None:
> > > @@ -2210,15 +2210,15 @@ class PlatformAutoGen(AutoGen):
> > > def CalculatePriorityValue(self, Key):
> > > Target, ToolChain, Arch, CommandType, Attr = Key.split('_')
> > > PriorityValue = 0x11111
> > > - if Target == "*":
> > > + if Target == TAB_STAR:
> > > PriorityValue &= 0x01111
> > > - if ToolChain == "*":
> > > + if ToolChain == TAB_STAR:
> > > PriorityValue &= 0x10111
> > > - if Arch == "*":
> > > + if Arch == TAB_STAR:
> > > PriorityValue &= 0x11011
> > > - if CommandType == "*":
> > > + if CommandType == TAB_STAR:
> > > PriorityValue &= 0x11101
> > > - if Attr == "*":
> > > + if Attr == TAB_STAR:
> > > PriorityValue &= 0x11110
> > >
> > > return self.PrioList["0x%0.5x" % PriorityValue] @@ -2253,9
> > > +2253,9 @@ class PlatformAutoGen(AutoGen):
> > > if (Key[0] == self.BuildRuleFamily and
> > > (ModuleStyle is None or len(Key) < 3 or (len(Key) >
> > > 2 and Key[2] ==
> > > ModuleStyle))):
> > > Target, ToolChain, Arch, CommandType, Attr = Key[1].split('_')
> > > - if (Target == self.BuildTarget or Target == "*") and\
> > > - (ToolChain == self.ToolChain or ToolChain == "*") and\
> > > - (Arch == self.Arch or Arch == "*") and\
> > > + if (Target == self.BuildTarget or Target == TAB_STAR) and\
> > > + (ToolChain == self.ToolChain or ToolChain == TAB_STAR)
> and\
> > > + (Arch == self.Arch or Arch == TAB_STAR) and\
> > > Options[Key].startswith("="):
> > >
> > > if OverrideList.get(Key[1]) is not None:
> > > @@ -2276,11 +2276,11 @@ class PlatformAutoGen(AutoGen):
> > > # Compare two Key, if one is included by
> > > another, choose the higher priority one
> > > #
> > > Target2, ToolChain2, Arch2, CommandType2, Attr2
> > > =
> > > NextKey.split("_")
> > > - if (Target1 == Target2 or Target1 == "*" or Target2 == "*")
> and\
> > > - (ToolChain1 == ToolChain2 or ToolChain1 == "*" or
> > ToolChain2
> > > == "*") and\
> > > - (Arch1 == Arch2 or Arch1 == "*" or Arch2 == "*") and\
> > > - (CommandType1 == CommandType2 or CommandType1 ==
> > "*"
> > > or CommandType2 == "*") and\
> > > - (Attr1 == Attr2 or Attr1 == "*" or Attr2 == "*"):
> > > + if (Target1 == Target2 or Target1 == TAB_STAR
> > > + or
> > > + Target2 ==
> > > TAB_STAR) and\
> > > + (ToolChain1 == ToolChain2 or ToolChain1 ==
> > > + TAB_STAR or
> > > ToolChain2 == TAB_STAR) and\
> > > + (Arch1 == Arch2 or Arch1 == TAB_STAR or
> > > + Arch2 == TAB_STAR)
> > > and\
> > > + (CommandType1 == CommandType2 or
> > > + CommandType1 ==
> > > TAB_STAR or CommandType2 == TAB_STAR) and\
> > > + (Attr1 == Attr2 or Attr1 == TAB_STAR or Attr2 ==
> TAB_STAR):
> > >
> > > if self.CalculatePriorityValue(NowKey) >
> > > self.CalculatePriorityValue(NextKey):
> > > if Options.get((self.BuildRuleFamily, NextKey)) is not
> None:
> > > @@ -2309,9 +2309,9 @@ class PlatformAutoGen(AutoGen):
> > > continue
> > > FamilyMatch = True
> > > # expand any wildcard
> > > - if Target == "*" or Target == self.BuildTarget:
> > > - if Tag == "*" or Tag == self.ToolChain:
> > > - if Arch == "*" or Arch == self.Arch:
> > > + if Target == TAB_STAR or Target == self.BuildTarget:
> > > + if Tag == TAB_STAR or Tag == self.ToolChain:
> > > + if Arch == TAB_STAR or Arch == self.Arch:
> > > if Tool not in BuildOptions:
> > > BuildOptions[Tool] = {}
> > > if Attr != "FLAGS" or Attr not in
> > > BuildOptions[Tool] or
> > > Options[Key].startswith('='):
> > > @@ -2344,9 +2344,9 @@ class PlatformAutoGen(AutoGen):
> > > continue
> > >
> > > # expand any wildcard
> > > - if Target == "*" or Target == self.BuildTarget:
> > > - if Tag == "*" or Tag == self.ToolChain:
> > > - if Arch == "*" or Arch == self.Arch:
> > > + if Target == TAB_STAR or Target == self.BuildTarget:
> > > + if Tag == TAB_STAR or Tag == self.ToolChain:
> > > + if Arch == TAB_STAR or Arch == self.Arch:
> > > if Tool not in BuildOptions:
> > > BuildOptions[Tool] = {}
> > > if Attr != "FLAGS" or Attr not in
> > > BuildOptions[Tool] or
> > > Options[Key].startswith('='):
> > > @@ -2971,8 +2971,8 @@ class ModuleAutoGen(AutoGen):
> > > @cached_property
> > > def SourceFileList(self):
> > > RetVal = []
> > > - ToolChainTagSet = {"", "*", self.ToolChain}
> > > - ToolChainFamilySet = {"", "*", self.ToolChainFamily,
> > > self.BuildRuleFamily}
> > > + ToolChainTagSet = {"", TAB_STAR, self.ToolChain}
> > > + ToolChainFamilySet = {"", TAB_STAR, self.ToolChainFamily,
> > > + self.BuildRuleFamily}
> > > for F in self.Module.Sources:
> > > # match tool chain
> > > if F.TagName not in ToolChainTagSet:
> > > @@ -3047,7 +3047,7 @@ class ModuleAutoGen(AutoGen):
> > > def BinaryFileList(self):
> > > RetVal = []
> > > for F in self.Module.Binaries:
> > > - if F.Target not in [TAB_ARCH_COMMON, '*'] and F.Target !=
> > > self.BuildTarget:
> > > + if F.Target not in [TAB_ARCH_COMMON, TAB_STAR] and
> > > + F.Target !=
> > > self.BuildTarget:
> > > continue
> > > RetVal.append(F)
> > > self._ApplyBuildRule(F, F.Type, BinaryFileList=RetVal)
> > > diff --git a/BaseTools/Source/Python/AutoGen/BuildEngine.py
> > > b/BaseTools/Source/Python/AutoGen/BuildEngine.py
> > > index ac7a6687552c..f9e3ac3a1daf 100644
> > > --- a/BaseTools/Source/Python/AutoGen/BuildEngine.py
> > > +++ b/BaseTools/Source/Python/AutoGen/BuildEngine.py
> > > @@ -110,7 +110,7 @@ class FileBuildRule:
> > > self.IncListFileMacro = self.INC_LIST_MACRO
> > >
> > > self.SourceFileType = Type
> > > - # source files listed not in "*" or "?" pattern format
> > > + # source files listed not in TAB_STAR or "?" pattern format
> > > if not ExtraDependency:
> > > self.ExtraSourceFileList = []
> > > else:
> > > @@ -150,12 +150,12 @@ class FileBuildRule:
> > > self.SourceFileExtList = set()
> > > for File in Input:
> > > Base, Ext = os.path.splitext(File)
> > > - if Base.find("*") >= 0:
> > > - # There's "*" in the file name
> > > + if Base.find(TAB_STAR) >= 0:
> > > + # There's TAB_STAR in the file name
> > > self.IsMultipleInput = True
> > > self.GenFileListMacro = True
> > > elif Base.find("?") < 0:
> > > - # There's no "*" and "?" in file name
> > > + # There's no TAB_STAR and "?" in file name
> > > self.ExtraSourceFileList.append(File)
> > > continue
> > > self.SourceFileExtList.add(Ext) @@ -553,7 +553,7 @@
> > > class
> > BuildRule:
> > > #
> > > # @param FileExt The extension of a file
> > > # @param ToolChainFamily The tool chain family name
> > > - # @param BuildVersion The build version number. "*" means
> any
> > > rule
> > > + # @param BuildVersion The build version number. TAB_STAR
> > means
> > > any rule
> > > # is applicalbe.
> > > #
> > > # @retval FileType The file type string
> > > diff --git a/BaseTools/Source/Python/BPDG/GenVpd.py
> > > b/BaseTools/Source/Python/BPDG/GenVpd.py
> > > index d7852d29eed0..e5da47f95e63 100644
> > > --- a/BaseTools/Source/Python/BPDG/GenVpd.py
> > > +++ b/BaseTools/Source/Python/BPDG/GenVpd.py
> > > @@ -21,7 +21,7 @@ import array
> > > import re
> > > from Common.LongFilePathSupport import OpenLongFilePath as open
> > from
> > > struct import * -from Common.DataType import MAX_SIZE_TYPE,
> > > MAX_VAL_TYPE
> > > +from Common.DataType import MAX_SIZE_TYPE, MAX_VAL_TYPE,
> > > TAB_STAR
> > > import Common.EdkLogger as EdkLogger import
> Common.BuildToolError
> > > as BuildToolError
> > >
> > > @@ -87,7 +87,7 @@ class PcdEntry:
> > > # for both hexadecimal and decimal.
> > > #
> > > def _GenOffsetValue(self):
> > > - if self.PcdOffset != "*" :
> > > + if self.PcdOffset != TAB_STAR:
> > > try:
> > > self.PcdBinOffset = int (self.PcdOffset)
> > > except:
> > > @@ -423,7 +423,7 @@ class GenVPD :
> > > Alignment = 1
> > >
> > > PCD.Alignment = Alignment
> > > - if PCD.PcdOffset != '*':
> > > + if PCD.PcdOffset != TAB_STAR:
> > > if PCD.PcdOccupySize % Alignment != 0:
> > > if PCD.PcdUnpackValue.startswith("{"):
> > > EdkLogger.warn("BPDG", "The offset
> > > value of PCD %s is not 8- byte aligned!" %(PCD.PcdCName),
> > > File=self.InputFileName) @@ -469,7
> > > +469,7 @@ class GenVPD :
> > > def FormatFileLine (self) :
> > >
> > > for eachPcd in self.FileLinesList :
> > > - if eachPcd.PcdOffset != '*' :
> > > + if eachPcd.PcdOffset != TAB_STAR :
> > > # Use pcd's Offset value as key, and pcd's Value as value
> > > self.PcdFixedOffsetSizeList.append(eachPcd)
> > > else :
> > > @@ -484,7 +484,7 @@ class GenVPD :
> > > def FixVpdOffset (self):
> > > # At first, the offset should start at 0
> > > # Sort fixed offset list in order to find out where has
> > > free spaces for the pcd's offset
> > > - # value is "*" to insert into.
> > > + # value is TAB_STAR to insert into.
> > >
> > > self.PcdFixedOffsetSizeList.sort(key=lambda x:
> > > x.PcdBinOffset)
> > >
> > > @@ -502,7 +502,7 @@ class GenVPD :
> > > self.PcdUnknownOffsetList[index+i -1 ],
> > > self.PcdUnknownOffsetList[index+i] =
> > > self.PcdUnknownOffsetList[index+i],
> > > self.PcdUnknownOffsetList[index+i -1]
> > >
> > > #
> > > - # Process all Offset value are "*"
> > > + # Process all Offset value are TAB_STAR
> > > #
> > > if (len(self.PcdFixedOffsetSizeList) == 0) and
> > > (len(self.PcdUnknownOffsetList) != 0) :
> > > # The offset start from 0 @@ -571,7 +571,7 @@ class
> > > GenVPD :
> > > eachUnfixedPcd =
> > > self.PcdUnknownOffsetList[countOfUnfixedList]
> > > needFixPcdSize = eachUnfixedPcd.PcdOccupySize
> > > # Not been fixed
> > > - if eachUnfixedPcd.PcdOffset == '*' :
> > > + if eachUnfixedPcd.PcdOffset == TAB_STAR :
> > > if LastOffset % eachUnfixedPcd.Alignment != 0:
> > > LastOffset = (LastOffset /
> > > eachUnfixedPcd.Alignment + 1) * eachUnfixedPcd.Alignment
> > > # The offset un-fixed pcd can write
> > > into this free space diff -- git
> > > a/BaseTools/Source/Python/Common/DataType.py
> > > b/BaseTools/Source/Python/Common/DataType.py
> > > index 1d1d22faa40b..6b375712b65e 100644
> > > --- a/BaseTools/Source/Python/Common/DataType.py
> > > +++ b/BaseTools/Source/Python/Common/DataType.py
> > > @@ -31,6 +31,7 @@ TAB_OPTION_START = '<'
> > > TAB_OPTION_END = '>'
> > > TAB_SLASH = '\\'
> > > TAB_BACK_SLASH = '/'
> > > +TAB_STAR = '*'
> > > TAB_LINE_BREAK = '\n'
> > > TAB_PRINTCHAR_VT = '\x0b'
> > > TAB_PRINTCHAR_BS = '\b'
> > > diff --git a/BaseTools/Source/Python/Common/Expression.py
> > > b/BaseTools/Source/Python/Common/Expression.py
> > > index a21ab5daa73e..db1310d534fb 100644
> > > --- a/BaseTools/Source/Python/Common/Expression.py
> > > +++ b/BaseTools/Source/Python/Common/Expression.py
> > > @@ -244,7 +244,7 @@ class ValueExpression(BaseExpression):
> > > 'IN' : 'in'
> > > }
> > >
> > > - NonLetterOpLst = ['+', '-', '*', '/', '%', '&', '|', '^', '~', '<<', '>>', '!', '=', '>',
> > '<',
> > > '?', ':']
> > > + NonLetterOpLst = ['+', '-', TAB_STAR, '/', '%', '&', '|', '^',
> > > + '~', '<<', '>>', '!', '=', '>', '<', '?', ':']
> > >
> > >
> > > SymbolPattern = re.compile("("
> > > @@ -498,7 +498,7 @@ class ValueExpression(BaseExpression):
> > >
> > > # A [ * B]*
> > > def _MulExpr(self):
> > > - return self._ExprFuncTemplate(self._UnaryExpr, {"*", "/", "%"})
> > > + return self._ExprFuncTemplate(self._UnaryExpr, {TAB_STAR,
> > > + "/",
> > > + "%"})
> > >
> > > # [!]*A
> > > def _UnaryExpr(self):
> > > diff --git a/BaseTools/Source/Python/Common/Misc.py
> > > b/BaseTools/Source/Python/Common/Misc.py
> > > index 3b8efb2e7179..61ba79241fb6 100644
> > > --- a/BaseTools/Source/Python/Common/Misc.py
> > > +++ b/BaseTools/Source/Python/Common/Misc.py
> > > @@ -1088,7 +1088,7 @@ class tdict:
> > > _ListType = type([])
> > > _TupleType = type(())
> > > _Wildcard = 'COMMON'
> > > - _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', '*', 'PLATFORM']
> > > + _ValidWildcardList = ['COMMON', 'DEFAULT', 'ALL', TAB_STAR,
> > > + 'PLATFORM']
> > >
> > > def __init__(self, _Single_=False, _Level_=2):
> > > self._Level_ = _Level_
> > > diff --git a/BaseTools/Source/Python/Common/ToolDefClassObject.py
> > > b/BaseTools/Source/Python/Common/ToolDefClassObject.py
> > > index 05a1ddfbcc89..186d279840c1 100644
> > > --- a/BaseTools/Source/Python/Common/ToolDefClassObject.py
> > > +++ b/BaseTools/Source/Python/Common/ToolDefClassObject.py
> > > @@ -29,7 +29,8 @@ from Common import GlobalData from
> > > Common.MultipleWorkspace import MultipleWorkspace as mws from
> > > .DataType import TAB_TOD_DEFINES_TARGET,
> > > TAB_TOD_DEFINES_TOOL_CHAIN_TAG,\
> > > TAB_TOD_DEFINES_TARGET_ARCH,
> > > TAB_TOD_DEFINES_COMMAND_TYPE\
> > > - , TAB_TOD_DEFINES_FAMILY,
> > > TAB_TOD_DEFINES_BUILDRULEFAMILY
> > > + , TAB_TOD_DEFINES_FAMILY,
> > > TAB_TOD_DEFINES_BUILDRULEFAMILY,\
> > > + TAB_STAR, TAB_TAT_DEFINES_TOOL_CHAIN_CONF
> > >
> > >
> > > ##
> > > @@ -97,7 +98,7 @@ class ToolDefClassObject(object):
> > > # adding/removing items from the original dict.
> > > for Key in list(self.ToolsDefTxtDictionary.keys()):
> > > List = Key.split('_')
> > > - if List[Index] == '*':
> > > + if List[Index] == TAB_STAR:
> > > for String in self.ToolsDefTxtDatabase[KeyList[Index]]:
> > > List[Index] = String
> > > NewKey = '%s_%s_%s_%s_%s' % tuple(List) @@
> > > -202,20 +203,20 @@ class ToolDefClassObject(object):
> > > if len(List) != 5:
> > > EdkLogger.verbose("Line %d: Not a valid name of
> > > definition: %s" % ((Index + 1), Name))
> > > continue
> > > - elif List[4] == '*':
> > > + elif List[4] == TAB_STAR:
> > > EdkLogger.verbose("Line %d: '*' is not allowed in
> > > last field: %s" % ((Index + 1), Name))
> > > continue
> > > else:
> > > self.ToolsDefTxtDictionary[Name] = Value
> > > - if List[0] != '*':
> > > + if List[0] != TAB_STAR:
> > >
> > > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET]
> > > += [List[0]]
> > > - if List[1] != '*':
> > > + if List[1] != TAB_STAR:
> > >
> > > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TOOL_CHAIN_TAG]
> > > += [List[1]]
> > > - if List[2] != '*':
> > > + if List[2] != TAB_STAR:
> > >
> > > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TARGET_ARCH] += [List[2]]
> > > - if List[3] != '*':
> > > + if List[3] != TAB_STAR:
> > >
> > > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_COMMAND_TYPE]
> > > += [List[3]]
> > > - if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] == '*' and
> > List[3]
> > > == '*':
> > > + if List[4] == TAB_TOD_DEFINES_FAMILY and List[2] ==
> > > + TAB_STAR
> > > and List[3] == TAB_STAR:
> > > if TAB_TOD_DEFINES_FAMILY not in
> self.ToolsDefTxtDatabase:
> > >
> > > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY] = {}
> > >
> > > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]] = Value
> @@
> > -226,7 +227,7 @@ class ToolDefClassObject(object):
> > >
> > > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_BUILDRULEFAMILY][List[1]]
> =
> > > Value
> > > elif
> > > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY][List[1]]
> > > != Value:
> > > EdkLogger.verbose("Line %d: No override
> > > allowed for the family of a tool chain: %s" % ((Index + 1), Name))
> > > - if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and List[2] ==
> > '*'
> > > and List[3] == '*':
> > > + if List[4] == TAB_TOD_DEFINES_BUILDRULEFAMILY and
> > > + List[2] ==
> > > TAB_STAR and List[3] == TAB_STAR:
> > > if TAB_TOD_DEFINES_BUILDRULEFAMILY not in
> > > self.ToolsDefTxtDatabase \
> > > or List[1] not in
> > > self.ToolsDefTxtDatabase[TAB_TOD_DEFINES_FAMILY]:
> > > EdkLogger.verbose("Line %d: The family is
> > > not specified, but BuildRuleFamily is specified for the tool chain:
> > > %s" % ((Index + 1), Name)) @@ -270,8 +271,8 @@ class
> > ToolDefClassObject(object):
> > > def ToolDefDict(ConfDir):
> > > Target = TargetTxtDict(ConfDir)
> > > ToolDef = ToolDefClassObject()
> > > - if DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CONF in
> > > Target.TargetTxtDictionary:
> > > - ToolsDefFile =
> > >
> >
> Target.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CON
> > > F]
> > > + if TAB_TAT_DEFINES_TOOL_CHAIN_CONF in
> Target.TargetTxtDictionary:
> > > + ToolsDefFile =
> > > + Target.TargetTxtDictionary[TAB_TAT_DEFINES_TOOL_CHAIN_CONF]
> > > if ToolsDefFile:
> > > ToolDef.LoadToolDefFile(os.path.normpath(ToolsDefFile))
> > > else:
> > > diff --git a/BaseTools/Source/Python/Common/VpdInfoFile.py
> > > b/BaseTools/Source/Python/Common/VpdInfoFile.py
> > > index 2fb8e66fe99c..3be0670e36fb 100644
> > > --- a/BaseTools/Source/Python/Common/VpdInfoFile.py
> > > +++ b/BaseTools/Source/Python/Common/VpdInfoFile.py
> > > @@ -57,7 +57,7 @@ FILE_COMMENT_TEMPLATE = \
> > > # <PcdName> ::= <TokenSpaceCName> "." <PcdCName>
> > > # <TokenSpaceCName> ::= C Variable Name of the Token Space GUID
> > > # <PcdCName> ::= C Variable Name of the PCD
> > > -# <Offset> ::= {"*"} {<HexNumber>}
> > > +# <Offset> ::= {TAB_STAR} {<HexNumber>}
> > > # <HexNumber> ::= "0x" (a-fA-F0-9){1,8}
> > > # <Size> ::= <HexNumber>
> > > # <Value> ::= {<HexNumber>} {<NonNegativeInt>} {<QString>}
> > > {<Array>}
> > > @@ -92,7 +92,7 @@ class VpdInfoFile:
> > > if (Vpd is None):
> > > EdkLogger.error("VpdInfoFile",
> > > BuildToolError.ATTRIBUTE_UNKNOWN_ERROR, "Invalid VPD PCD entry.")
> > >
> > > - if not (Offset >= 0 or Offset == "*"):
> > > + if not (Offset >= 0 or Offset == TAB_STAR):
> > > EdkLogger.error("VpdInfoFile",
> > > BuildToolError.PARAMETER_INVALID, "Invalid offset parameter: %s." %
> > > Offset)
> > >
> > > if Vpd.DatumType == TAB_VOID:
> > > @@ -186,8 +186,8 @@ class VpdInfoFile:
> > > VpdObjectTokenCName = PcdItem[0]
> > > for sku in VpdObject.SkuInfoList:
> > > if VpdObject.TokenSpaceGuidCName ==
> > > TokenSpaceName and VpdObjectTokenCName == PcdTokenName.strip()
> > and sku == SkuId:
> > > - if self._VpdArray[VpdObject][sku] == "*":
> > > - if Offset == "*":
> > > + if self._VpdArray[VpdObject][sku] == TAB_STAR:
> > > + if Offset == TAB_STAR:
> > > EdkLogger.error("BPDG",
> > > BuildToolError.FORMAT_INVALID, "The offset of %s has not been fixed
> > > up by third-party BPDG tool." %
> > > PcdName)
> > > self._VpdArray[VpdObject][sku] = Offset
> > > Found = True diff --git
> > > a/BaseTools/Source/Python/GenFds/FdfParser.py
> > > b/BaseTools/Source/Python/GenFds/FdfParser.py
> > > index 44cc8f63d07b..cedc4ea0c122 100644
> > > --- a/BaseTools/Source/Python/GenFds/FdfParser.py
> > > +++ b/BaseTools/Source/Python/GenFds/FdfParser.py
> > > @@ -64,7 +64,6 @@ T_CHAR_CR = '\r'
> > > T_CHAR_TAB = '\t'
> > > T_CHAR_DOUBLE_QUOTE = '\"'
> > > T_CHAR_SINGLE_QUOTE = '\''
> > > -T_CHAR_STAR = '*'
> > > T_CHAR_BRACE_R = '}'
> > >
> > > SEPARATORS = {TAB_EQUAL_SPLIT, TAB_VALUE_SPLIT,
> > TAB_COMMA_SPLIT, '{',
> > > T_CHAR_BRACE_R} @@ -533,7 +532,7 @@ class
> > > FdfParser:
> > > InComment = False
> > > HashComment = False
> > > # check for */ comment end
> > > - elif InComment and not DoubleSlashComment and not
> > HashComment
> > > and self._CurrentChar() == T_CHAR_STAR and self._NextChar() ==
> > > TAB_BACK_SLASH:
> > > + elif InComment and not DoubleSlashComment and not
> > > HashComment and self._CurrentChar() == TAB_STAR and
> self._NextChar()
> > > == TAB_BACK_SLASH:
> > > self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> > > self._GetOneChar()
> > > self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> > > @@ -552,7 +551,7 @@ class FdfParser:
> > > InComment = True
> > > HashComment = True
> > > # check for /* comment start
> > > - elif self._CurrentChar() == TAB_BACK_SLASH and self._NextChar()
> > ==
> > > T_CHAR_STAR:
> > > + elif self._CurrentChar() == TAB_BACK_SLASH and
> > > + self._NextChar() ==
> > > TAB_STAR:
> > > self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> > > self._GetOneChar()
> > > self._SetCurrentCharValue(TAB_SPACE_SPLIT)
> > > diff --git a/BaseTools/Source/Python/GenFds/GenFds.py
> > > b/BaseTools/Source/Python/GenFds/GenFds.py
> > > index 0c8091b79841..0513f488fca3 100644
> > > --- a/BaseTools/Source/Python/GenFds/GenFds.py
> > > +++ b/BaseTools/Source/Python/GenFds/GenFds.py
> > > @@ -653,7 +653,7 @@ class GenFds(object):
> > > FileGuidList.append(FileStatementGuid)
> > > Name = []
> > > FfsPath = os.path.join(GenFdsGlobalVariable.FvDir, 'Ffs')
> > > - FfsPath = glob(os.path.join(FfsPath, FileStatementGuid) +
> '*')
> > > + FfsPath = glob(os.path.join(FfsPath,
> > > + FileStatementGuid) + TAB_STAR)
> > > if not FfsPath:
> > > continue
> > > if not os.path.exists(FfsPath[0]):
> > > diff --git a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> > > b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> > > index ea61f723a73c..0812c56bdae8 100644
> > > --- a/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> > > +++ b/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py
> > > @@ -217,12 +217,12 @@ class GenFdsGlobalVariable:
> > >
> > > if not Inf.IsBinaryModule:
> > > for File in Inf.Sources:
> > > - if File.TagName in {"", "*", GenFdsGlobalVariable.ToolChainTag}
> > and
> > > \
> > > - File.ToolChainFamily in {"", "*",
> > > GenFdsGlobalVariable.ToolChainFamily}:
> > > + if File.TagName in {"", DataType.TAB_STAR,
> > > GenFdsGlobalVariable.ToolChainTag} and \
> > > + File.ToolChainFamily in {"", DataType.TAB_STAR,
> > > GenFdsGlobalVariable.ToolChainFamily}:
> > > FileList.append((File,
> > > DataType.TAB_UNKNOWN_FILE))
> > >
> > > for File in Inf.Binaries:
> > > - if File.Target in {DataType.TAB_COMMON, '*',
> > > GenFdsGlobalVariable.TargetName}:
> > > + if File.Target in {DataType.TAB_COMMON,
> > > + DataType.TAB_STAR,
> > > GenFdsGlobalVariable.TargetName}:
> > > FileList.append((File, File.Type))
> > >
> > > for File, FileType in FileList:
> > > @@ -893,7 +893,7 @@ def FindExtendTool(KeyStringList,
> > > CurrentArchList,
> > > NameGuid):
> > > for Index in range(2, -1, -1):
> > > for Key in list(BuildOption.keys()):
> > > List = Key.split('_')
> > > - if List[Index] == '*':
> > > + if List[Index] == DataType.TAB_STAR:
> > > for String in ToolDb[ToolList[Index]]:
> > > if String in [Arch,
> > > GenFdsGlobalVariable.TargetName,
> > > GenFdsGlobalVariable.ToolChainTag]:
> > > List[Index] = String diff --git
> > > a/BaseTools/Source/Python/GenFds/Section.py
> > > b/BaseTools/Source/Python/GenFds/Section.py
> > > index 19a70009dcce..bab74aedf0b9 100644
> > > --- a/BaseTools/Source/Python/GenFds/Section.py
> > > +++ b/BaseTools/Source/Python/GenFds/Section.py
> > > @@ -131,7 +131,7 @@ class Section (SectionClassObject):
> > > if File.Type == FileType or
> > > (int(FfsInf.PiSpecVersion, 16) >= 0x0001000A \
> > > and FileType ==
> > > 'DXE_DPEX' and File.Type ==
> > > BINARY_FILE_TYPE_SMM_DEPEX) \
> > > or (FileType ==
> > > BINARY_FILE_TYPE_TE and File.Type == BINARY_FILE_TYPE_PE32):
> > > - if '*' in FfsInf.TargetOverrideList or File.Target == '*' or
> > > File.Target in FfsInf.TargetOverrideList or FfsInf.TargetOverrideList == []:
> > > + if TAB_STAR in FfsInf.TargetOverrideList or
> > > + File.Target ==
> > > TAB_STAR or File.Target in FfsInf.TargetOverrideList or
> > > FfsInf.TargetOverrideList == []:
> > > FileList.append(FfsInf.PatchEfiFile(File.Path, File.Type))
> > > else:
> > > GenFdsGlobalVariable.InfLogger
> > > ("\nBuild Target \'%s\' of File %s is not in the Scope of %s
> > > specified by INF %s in FDF" %(File.Target, File.File,
> > > FfsInf.TargetOverrideList,
> > > FfsInf.InfFileName)) diff --git
> > > a/BaseTools/Source/Python/Workspace/DscBuildData.py
> > > b/BaseTools/Source/Python/Workspace/DscBuildData.py
> > > index 11aa63fb263c..22cbbb119a5a 100644
> > > --- a/BaseTools/Source/Python/Workspace/DscBuildData.py
> > > +++ b/BaseTools/Source/Python/Workspace/DscBuildData.py
> > > @@ -2315,11 +2315,11 @@ class
> DscBuildData(PlatformBuildClassObject):
> > > continue
> > > if Attr != "FLAGS":
> > > continue
> > > - if Target == "*" or Target == self._Target:
> > > - if Tag == "*" or Tag == self._Toolchain:
> > > + if Target == TAB_STAR or Target == self._Target:
> > > + if Tag == TAB_STAR or Tag == self._Toolchain:
> > > if 'COMMON' not in BuildOptions:
> > > BuildOptions['COMMON'] = set()
> > > - if Arch == "*":
> > > + if Arch == TAB_STAR:
> > > BuildOptions['COMMON'].add(self.BuildOptions[Options])
> > > if Arch in self.SupArchList:
> > > if Arch not in BuildOptions:
> > > --
> > > 2.16.2.windows.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 8+ messages in thread