* How to using PcdGetEx to change a PCD.
@ 2017-12-14 8:59 krishnaLee
2017-12-14 10:27 ` Andrew Fish
0 siblings, 1 reply; 6+ messages in thread
From: krishnaLee @ 2017-12-14 8:59 UTC (permalink / raw)
To: edk2-devel
Hello,
I am learning and writing a application to change the Nt32pkg-virtual machine's boot time.follow code is success.
but I think if I using PcdGetEx16 function, it will also work well,but failed when I compile it.
I had read some Specs about the difference between PcdGetEx and PcdGet,but I can't understand,maybe I need some practice,
So can anyone modify it to using PcdGetEx to implement the same function in the application?
//source-code--start
EFI_STATUS
EFIAPI
UefiMain (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
UINTN buffer=0;
UINTN index;
buffer=PcdGet16(PcdPlatformBootTimeOut);
//buffer=PcdGetEx16(&gEfiMdePkgTokenSpaceGuid,PcdPlatformBootTimeOut);//compile failed.
Print(L"buffer:%d\n",buffer);
PcdSet16(PcdPlatformBootTimeOut,5);
...
//source-code-end.
attachment is the full source code.
edk2-vUDK2017's build command:
build -p Nt32Pkg\Nt32Pkg.dsc -m Nt32Pkg\Application\mytestpcd2\mytestpcd2.inf
thank you very much!
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: How to using PcdGetEx to change a PCD. 2017-12-14 8:59 How to using PcdGetEx to change a PCD krishnaLee @ 2017-12-14 10:27 ` Andrew Fish 2017-12-14 14:55 ` Gao, Liming 0 siblings, 1 reply; 6+ messages in thread From: Andrew Fish @ 2017-12-14 10:27 UTC (permalink / raw) To: krishnaLee; +Cc: edk2-devel > On Dec 14, 2017, at 12:59 AM, krishnaLee <sssky307@163.com> wrote: > > Hello, > I am learning and writing a application to change the Nt32pkg-virtual machine's boot time.follow code is success. > but I think if I using PcdGetEx16 function, it will also work well,but failed when I compile it. > I had read some Specs about the difference between PcdGetEx and PcdGet,but I can't understand,maybe I need some practice, > So can anyone modify it to using PcdGetEx to implement the same function in the application? > //source-code--start Did you add: #include <Guid/MdePkgTokenSpace.h> and list gEfiMdePkgTokenSpaceGuid in the [Guids] section of the INF. In general it is hard to comment on compiler failures in fragments of code. If you post the actual compiler error it is easier to explain. The PCDs are a GUID + token number namespace for config. Since anyone can define a GUID that does not conflict it allows arbitrary extension without conflict. The Ex form of the API includes the GUID + token number. The non Ex form is a size optimization that uses a build generated token space. So generally if everything is built together then you use the non Ex form to save space. If different binaries that got compiled in different places need to work together then the Ex form is required. Thanks, Andrew Fish > EFI_STATUS > EFIAPI > UefiMain ( > IN EFI_HANDLE ImageHandle, > IN EFI_SYSTEM_TABLE *SystemTable > ) > { > UINTN buffer=0; > UINTN index; > buffer=PcdGet16(PcdPlatformBootTimeOut); > //buffer=PcdGetEx16(&gEfiMdePkgTokenSpaceGuid,PcdPlatformBootTimeOut);//compile failed. > Print(L"buffer:%d\n",buffer); > PcdSet16(PcdPlatformBootTimeOut,5); > ... > > > //source-code-end. > > > attachment is the full source code. > edk2-vUDK2017's build command: > build -p Nt32Pkg\Nt32Pkg.dsc -m Nt32Pkg\Application\mytestpcd2\mytestpcd2.inf > > > thank you very much! > > _______________________________________________ > edk2-devel mailing list > edk2-devel@lists.01.org <mailto:edk2-devel@lists.01.org> > https://lists.01.org/mailman/listinfo/edk2-devel <https://lists.01.org/mailman/listinfo/edk2-devel> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to using PcdGetEx to change a PCD. 2017-12-14 10:27 ` Andrew Fish @ 2017-12-14 14:55 ` Gao, Liming 2017-12-28 9:41 ` krishnaLee 0 siblings, 1 reply; 6+ messages in thread From: Gao, Liming @ 2017-12-14 14:55 UTC (permalink / raw) To: Andrew Fish, krishnaLee; +Cc: edk2-devel@lists.01.org PcdGet() is the recommended API to be used. It will be mapped to the matched PcdGet usage based on PCD type. PcdGetEx() is only used when PCD is configured to DynamicEx type. Its first parameter is the pointer to the token space guid, the second parameter is the token number. The token number can be get by PcdToken() macro. So, the correct way is PcdGetEx16(&gEfiMdePkgTokenSpaceGuid, PcdToken (PcdPlatformBootTimeOut));. But PcdPlatformBootTimeOut is not configured to DynamicEx PCD in NT32 platform. This style can pass build, but can't work. Thanks Liming > -----Original Message----- > From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Andrew Fish > Sent: Thursday, December 14, 2017 6:27 PM > To: krishnaLee <sssky307@163.com> > Cc: edk2-devel@lists.01.org > Subject: Re: [edk2] How to using PcdGetEx to change a PCD. > > > > > On Dec 14, 2017, at 12:59 AM, krishnaLee <sssky307@163.com> wrote: > > > > Hello, > > I am learning and writing a application to change the Nt32pkg-virtual machine's boot time.follow code is success. > > but I think if I using PcdGetEx16 function, it will also work well,but failed when I compile it. > > I had read some Specs about the difference between PcdGetEx and PcdGet,but I can't understand,maybe I need some practice, > > So can anyone modify it to using PcdGetEx to implement the same function in the application? > > //source-code--start > > Did you add: > > #include <Guid/MdePkgTokenSpace.h> > > and list gEfiMdePkgTokenSpaceGuid in the [Guids] section of the INF. > > In general it is hard to comment on compiler failures in fragments of code. If you post the actual compiler error it is easier to explain. > > > > The PCDs are a GUID + token number namespace for config. Since anyone can define a GUID that does not conflict it allows arbitrary > extension without conflict. > > The Ex form of the API includes the GUID + token number. The non Ex form is a size optimization that uses a build generated token > space. So generally if everything is built together then you use the non Ex form to save space. If different binaries that got compiled in > different places need to work together then the Ex form is required. > > Thanks, > > Andrew Fish > > > EFI_STATUS > > EFIAPI > > UefiMain ( > > IN EFI_HANDLE ImageHandle, > > IN EFI_SYSTEM_TABLE *SystemTable > > ) > > { > > UINTN buffer=0; > > UINTN index; > > buffer=PcdGet16(PcdPlatformBootTimeOut); > > //buffer=PcdGetEx16(&gEfiMdePkgTokenSpaceGuid,PcdPlatformBootTimeOut);//compile failed. > > Print(L"buffer:%d\n",buffer); > > PcdSet16(PcdPlatformBootTimeOut,5); > > ... > > > > > > //source-code-end. > > > > > > attachment is the full source code. > > edk2-vUDK2017's build command: > > build -p Nt32Pkg\Nt32Pkg.dsc -m Nt32Pkg\Application\mytestpcd2\mytestpcd2.inf > > > > > > thank you very much! > > > > _______________________________________________ > > edk2-devel mailing list > > edk2-devel@lists.01.org <mailto:edk2-devel@lists.01.org> > > https://lists.01.org/mailman/listinfo/edk2-devel <https://lists.01.org/mailman/listinfo/edk2-devel> > _______________________________________________ > edk2-devel mailing list > edk2-devel@lists.01.org > https://lists.01.org/mailman/listinfo/edk2-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to using PcdGetEx to change a PCD. 2017-12-14 14:55 ` Gao, Liming @ 2017-12-28 9:41 ` krishnaLee 2017-12-29 15:26 ` Gao, Liming 0 siblings, 1 reply; 6+ messages in thread From: krishnaLee @ 2017-12-28 9:41 UTC (permalink / raw) To: Gao, Liming; +Cc: Andrew Fish, edk2-devel@lists.01.org Hi,Liming and Andrew Fish, I modified as your description,and move the pcd to [PcdEx] in inf file,but compile fail,the error is type-Mismatched,I understand now,so this pcd is not Ex-Pcd. As Andrew Fish said:"If different binaries that got compiled in different places need to work together then the Ex form is required." Does it mean ,for example ,the bios_rom will finally contaion both Ex and non_Ex PCDs,and PCD_driver will publish the interface to access,so other module for exameple a efi_application access Pcds can using PcdGetEx function to access pcds(type must be DynamicEx )? I can't find a example for PcdGetEx in the EDK2 project,so I think the steps to using it as follow,right? 1,define a DynamicEx PCD in MdePkg.dec,format as follow��the follow token-number:0x000000f1 ,just a unique number will work well ,yes? [PcdsDynamicEx] gEfiMdePkgTokenSpaceGuid.myExPcdSample| 0xE0000000 |UINT64 | 0x000000f1 2,reference and modify it in Nt32Pkg.dsc as follow: [PcdsDynamicEx] gEfiMdePkgTokenSpaceGuid.myExPcdSample| 0xD0000000 # value changed for the platform. 3,using the pcd in some drivers by PcdGetEx function,the driver can modifiy it in runtime ,the driver must build in Nt32Pkg.dsc, the driver must build in bios.fd. 3-1,add follow to driver-inf file: [Guid] gEfiMdePkgTokenSpaceGuid [PcdEx] gEfiMdePkgTokenSpaceGuid.myExPcdSample 3-2,add pcd-library to the driver-module and write code in source.c as follow: #include <Library/PcdLib.h>//pcd need #include <Guid/MdePkgTokenSpace.h>//PcdToken ... PcdGetEx64(&gEfiMdePkgTokenSpaceGuid,PcdToken(myExPcdSample)); PcdSetEx64(&gEfiMdePkgTokenSpaceGuid,PcdToken(myExPcdSample),some_value_changed); 4,using the pcd in uefi_Shell_application by PcdGetEx function,to check the runtime-value.the flow is same as driver. //steps-end //last build-error-message: build... d:\edk2-vudk2017\Nt32Pkg\Nt32Pkg.dsc(...): error 1002: Mismatched PCD type gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut is defined as [DynamicEx] in module d:\edk2-vudk2017\Nt32Pkg\Application\mytestpcd2\mytestpcd2.inf, but as [DynamicHii] in platform. Stop. some edk2 mail has sorted to a wrong group by me,so I haven't see it for a long time,sorry to reply late. thank you by krishna At 2017-12-14 22:55:00, "Gao, Liming" <liming.gao@intel.com> wrote: >PcdGet() is the recommended API to be used. It will be mapped to the matched PcdGet usage based on PCD type. > >PcdGetEx() is only used when PCD is configured to DynamicEx type. Its first parameter is the pointer to the token space guid, the second parameter is the token number. The token number can be get by PcdToken() macro. So, the correct way is PcdGetEx16(&gEfiMdePkgTokenSpaceGuid, PcdToken (PcdPlatformBootTimeOut));. But PcdPlatformBootTimeOut is not configured to DynamicEx PCD in NT32 platform. This style can pass build, but can't work. > >Thanks >Liming >> -----Original Message----- >> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Andrew Fish >> Sent: Thursday, December 14, 2017 6:27 PM >> To: krishnaLee <sssky307@163.com> >> Cc: edk2-devel@lists.01.org >> Subject: Re: [edk2] How to using PcdGetEx to change a PCD. >> >> >> >> > On Dec 14, 2017, at 12:59 AM, krishnaLee <sssky307@163.com> wrote: >> > >> > Hello, >> > I am learning and writing a application to change the Nt32pkg-virtual machine's boot time.follow code is success. >> > but I think if I using PcdGetEx16 function, it will also work well,but failed when I compile it. >> > I had read some Specs about the difference between PcdGetEx and PcdGet,but I can't understand,maybe I need some practice, >> > So can anyone modify it to using PcdGetEx to implement the same function in the application? >> > //source-code--start >> >> Did you add: >> >> #include <Guid/MdePkgTokenSpace.h> >> >> and list gEfiMdePkgTokenSpaceGuid in the [Guids] section of the INF. >> >> In general it is hard to comment on compiler failures in fragments of code. If you post the actual compiler error it is easier to explain. >> >> >> >> The PCDs are a GUID + token number namespace for config. Since anyone can define a GUID that does not conflict it allows arbitrary >> extension without conflict. >> >> The Ex form of the API includes the GUID + token number. The non Ex form is a size optimization that uses a build generated token >> space. So generally if everything is built together then you use the non Ex form to save space. If different binaries that got compiled in >> different places need to work together then the Ex form is required. >> >> Thanks, >> >> Andrew Fish >> >> > EFI_STATUS >> > EFIAPI >> > UefiMain ( >> > IN EFI_HANDLE ImageHandle, >> > IN EFI_SYSTEM_TABLE *SystemTable >> > ) >> > { >> > UINTN buffer=0; >> > UINTN index; >> > buffer=PcdGet16(PcdPlatformBootTimeOut); >> > //buffer=PcdGetEx16(&gEfiMdePkgTokenSpaceGuid,PcdPlatformBootTimeOut);//compile failed. >> > Print(L"buffer:%d\n",buffer); >> > PcdSet16(PcdPlatformBootTimeOut,5); >> > ... >> > >> > >> > //source-code-end. >> > >> > >> > attachment is the full source code. >> > edk2-vUDK2017's build command: >> > build -p Nt32Pkg\Nt32Pkg.dsc -m Nt32Pkg\Application\mytestpcd2\mytestpcd2.inf >> > >> > >> > thank you very much! >> > >> > _______________________________________________ >> > edk2-devel mailing list >> > edk2-devel@lists.01.org <mailto:edk2-devel@lists.01.org> >> > https://lists.01.org/mailman/listinfo/edk2-devel <https://lists.01.org/mailman/listinfo/edk2-devel> >> _______________________________________________ >> edk2-devel mailing list >> edk2-devel@lists.01.org >> https://lists.01.org/mailman/listinfo/edk2-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to using PcdGetEx to change a PCD. 2017-12-28 9:41 ` krishnaLee @ 2017-12-29 15:26 ` Gao, Liming 2017-12-31 8:47 ` krishnaLee 0 siblings, 1 reply; 6+ messages in thread From: Gao, Liming @ 2017-12-29 15:26 UTC (permalink / raw) To: krishnaLee; +Cc: Andrew Fish, edk2-devel@lists.01.org The message shows this PCD is configured as DynamicHii in DSC. For DynamicEx PCD, it should be defined in DEC [PcdsDynamicEx] section. It is set in DSC [PcdsDynamicExDefault] or [PcdsDynamicExHii] section. From: krishnaLee [mailto:sssky307@163.com] Sent: Thursday, December 28, 2017 5:42 PM To: Gao, Liming <liming.gao@intel.com> Cc: Andrew Fish <afish@apple.com>; edk2-devel@lists.01.org Subject: Re:[edk2] How to using PcdGetEx to change a PCD. Hi,Liming and Andrew Fish, I modified as your description,and move the pcd to [PcdEx] in inf file,but compile fail,the error is type-Mismatched,I understand now,so this pcd is not Ex-Pcd. As Andrew Fish said:"If different binaries that got compiled in different places need to work together then the Ex form is required." Does it mean ,for example ,the bios_rom will finally contaion both Ex and non_Ex PCDs,and PCD_driver will publish the interface to access,so other module for exameple a efi_application access Pcds can using PcdGetEx function to access pcds(type must be DynamicEx )? I can't find a example for PcdGetEx in the EDK2 project,so I think the steps to using it as follow,right? 1,define a DynamicEx PCD in MdePkg.dec,format as follow，the follow token-number:0x000000f1 ,just a unique number will work well ,yes? [PcdsDynamicEx] gEfiMdePkgTokenSpaceGuid.myExPcdSample| 0xE0000000 |UINT64 | 0x000000f1 2,reference and modify it in Nt32Pkg.dsc as follow: [PcdsDynamicEx] gEfiMdePkgTokenSpaceGuid.myExPcdSample| 0xD0000000 # value changed for the platform. 3,using the pcd in some drivers by PcdGetEx function,the driver can modifiy it in runtime ,the driver must build in Nt32Pkg.dsc, the driver must build in bios.fd. 3-1,add follow to driver-inf file: [Guid] gEfiMdePkgTokenSpaceGuid [PcdEx] gEfiMdePkgTokenSpaceGuid.myExPcdSample 3-2,add pcd-library to the driver-module and write code in source.c as follow: #include <Library/PcdLib.h> //pcd need #include <Guid/MdePkgTokenSpace.h> //PcdToken ... PcdGetEx64(&gEfiMdePkgTokenSpaceGuid,PcdToken(myExPcdSample)); PcdSetEx64(&gEfiMdePkgTokenSpaceGuid,PcdToken(myExPcdSample),some_value_changed); 4,using the pcd in uefi_Shell_application by PcdGetEx function,to check the runtime-value.the flow is same as driver. //steps-end //last build-error-message: build... d:\edk2-vudk2017\Nt32Pkg\Nt32Pkg.dsc(...): error 1002: Mismatched PCD type gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut is defined as [DynamicEx] in module d:\edk2-vudk2017\Nt32Pkg\Application\mytestpcd2\mytestpcd2.inf, but as [DynamicHii] in platform. Stop. some edk2 mail has sorted to a wrong group by me,so I haven't see it for a long time,sorry to reply late. thank you by krishna At 2017-12-14 22:55:00, "Gao, Liming" <liming.gao@intel.com<mailto:liming.gao@intel.com>> wrote: >PcdGet() is the recommended API to be used. It will be mapped to the matched PcdGet usage based on PCD type. > >PcdGetEx() is only used when PCD is configured to DynamicEx type. Its first parameter is the pointer to the token space guid, the second parameter is the token number. The token number can be get by PcdToken() macro. So, the correct way is PcdGetEx16(&gEfiMdePkgTokenSpaceGuid, PcdToken (PcdPlatformBootTimeOut));. But PcdPlatformBootTimeOut is not configured to DynamicEx PCD in NT32 platform. This style can pass build, but can't work. > >Thanks >Liming >> -----Original Message----- >> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Andrew Fish >> Sent: Thursday, December 14, 2017 6:27 PM >> To: krishnaLee <sssky307@163.com<mailto:sssky307@163.com>> >> Cc: edk2-devel@lists.01.org<mailto:edk2-devel@lists.01.org> >> Subject: Re: [edk2] How to using PcdGetEx to change a PCD. >> >> >> >> > On Dec 14, 2017, at 12:59 AM, krishnaLee <sssky307@163.com<mailto:sssky307@163.com>> wrote: >> > >> > Hello, >> > I am learning and writing a application to change the Nt32pkg-virtual machine's boot time.follow code is success. >> > but I think if I using PcdGetEx16 function, it will also work well,but failed when I compile it. >> > I had read some Specs about the difference between PcdGetEx and PcdGet,but I can't understand,maybe I need some practice, >> > So can anyone modify it to using PcdGetEx to implement the same function in the application? >> > //source-code--start >> >> Did you add: >> >> #include <Guid/MdePkgTokenSpace.h> >> >> and list gEfiMdePkgTokenSpaceGuid in the [Guids] section of the INF. >> >> In general it is hard to comment on compiler failures in fragments of code. If you post the actual compiler error it is easier to explain. >> >> >> >> The PCDs are a GUID + token number namespace for config. Since anyone can define a GUID that does not conflict it allows arbitrary >> extension without conflict. >> >> The Ex form of the API includes the GUID + token number. The non Ex form is a size optimization that uses a build generated token >> space. So generally if everything is built together then you use the non Ex form to save space. If different binaries that got compiled in >> different places need to work together then the Ex form is required. >> >> Thanks, >> >> Andrew Fish >> >> > EFI_STATUS >> > EFIAPI >> > UefiMain ( >> > IN EFI_HANDLE ImageHandle, >> > IN EFI_SYSTEM_TABLE *SystemTable >> > ) >> > { >> > UINTN buffer=0; >> > UINTN index; >> > buffer=PcdGet16(PcdPlatformBootTimeOut); >> > //buffer=PcdGetEx16(&gEfiMdePkgTokenSpaceGuid,PcdPlatformBootTimeOut);//compile failed. >> > Print(L"buffer:%d\n",buffer); >> > PcdSet16(PcdPlatformBootTimeOut,5); >> > ... >> > >> > >> > //source-code-end. >> > >> > >> > attachment is the full source code. >> > edk2-vUDK2017's build command: >> > build -p Nt32Pkg\Nt32Pkg.dsc -m Nt32Pkg\Application\mytestpcd2\mytestpcd2.inf >> > >> > >> > thank you very much! >> > >> > _______________________________________________ >> > edk2-devel mailing list >> > edk2-devel@lists.01.org<mailto:edk2-devel@lists.01.org> <mailto:edk2-devel@lists.01.org> >> > https://lists.01.org/mailman/listinfo/edk2-devel <https://lists.01.org/mailman/listinfo/edk2-devel> >> _______________________________________________ >> edk2-devel mailing list >> edk2-devel@lists.01.org<mailto:edk2-devel@lists.01.org> >> https://lists.01.org/mailman/listinfo/edk2-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to using PcdGetEx to change a PCD. 2017-12-29 15:26 ` Gao, Liming @ 2017-12-31 8:47 ` krishnaLee 0 siblings, 0 replies; 6+ messages in thread From: krishnaLee @ 2017-12-31 8:47 UTC (permalink / raw) To: Gao, Liming; +Cc: Andrew Fish, edk2-devel@lists.01.org Yes, I had tried pass,I think using non-Ex-Pcd will enougth at most of time, the ExPcd is not a good idea. thank you!. 1,DynamicEx PCD is defined in DEC [PcdsDynamicEx] 2, referenced in DSC [PcdsDynamicExDefault] 3,listed in driver's inf [PcdEx] 4,using format PcdGetEx16(&gEfiMdePkgTokenSpaceGuid,myExPcdSample); //do not need the PcdToken(),to wrap myExPcdSample; �� 2017-12-29 23:26:41��"Gao, Liming" <liming.gao@intel.com> ��� The message shows this PCD is configured as DynamicHii in DSC. For DynamicEx PCD, it should be defined in DEC [PcdsDynamicEx] section. It is set in DSC [PcdsDynamicExDefault] or [PcdsDynamicExHii] section. From: krishnaLee [mailto:sssky307@163.com] Sent: Thursday, December 28, 2017 5:42 PM To: Gao, Liming <liming.gao@intel.com> Cc: Andrew Fish <afish@apple.com>; edk2-devel@lists.01.org Subject: Re:[edk2] How to using PcdGetEx to change a PCD. Hi,Liming and Andrew Fish, I modified as your description,and move the pcd to [PcdEx] in inf file,but compile fail,the error is type-Mismatched,I understand now,so this pcd is not Ex-Pcd. As Andrew Fish said:"If different binaries that got compiled in different places need to work together then the Ex form is required." Does it mean ,for example ,the bios_rom will finally contaion both Ex and non_Ex PCDs,and PCD_driver will publish the interface to access,so other module for exameple a efi_application access Pcds can using PcdGetEx function to access pcds(type must be DynamicEx )? I can't find a example for PcdGetEx in the EDK2 project,so I think the steps to using it as follow,right? 1,define a DynamicEx PCD in MdePkg.dec,format as follow��the follow token-number:0x000000f1 ,just a unique number will work well ,yes? [PcdsDynamicEx] gEfiMdePkgTokenSpaceGuid.myExPcdSample| 0xE0000000 |UINT64 | 0x000000f1 2,reference and modify it in Nt32Pkg.dsc as follow: [PcdsDynamicEx] gEfiMdePkgTokenSpaceGuid.myExPcdSample| 0xD0000000 # value changed for the platform. 3,using the pcd in some drivers by PcdGetEx function,the driver can modifiy it in runtime ,the driver must build in Nt32Pkg.dsc, the driver must build in bios.fd. 3-1,add follow to driver-inf file: [Guid] gEfiMdePkgTokenSpaceGuid [PcdEx] gEfiMdePkgTokenSpaceGuid.myExPcdSample 3-2,add pcd-library to the driver-module and write code in source.c as follow: #include <Library/PcdLib.h> //pcd need #include <Guid/MdePkgTokenSpace.h>//PcdToken ... PcdGetEx64(&gEfiMdePkgTokenSpaceGuid,PcdToken(myExPcdSample)); PcdSetEx64(&gEfiMdePkgTokenSpaceGuid,PcdToken(myExPcdSample),some_value_changed); 4,using the pcd in uefi_Shell_application by PcdGetEx function,to check the runtime-value.the flow is same as driver. //steps-end //last build-error-message: build... d:\edk2-vudk2017\Nt32Pkg\Nt32Pkg.dsc(...): error 1002: Mismatched PCD type gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut is defined as [DynamicEx] in module d:\edk2-vudk2017\Nt32Pkg\Application\mytestpcd2\mytestpcd2.inf, but as [DynamicHii] in platform. Stop. some edk2 mail has sorted to a wrong group by me,so I haven't see it for a long time,sorry to reply late. thank you by krishna At 2017-12-14 22:55:00, "Gao, Liming" <liming.gao@intel.com> wrote: >PcdGet() is the recommended API to be used. It will be mapped to the matched PcdGet usage based on PCD type. > >PcdGetEx() is only used when PCD is configured to DynamicEx type. Its first parameter is the pointer to the token space guid, the second parameter is the token number. The token number can be get by PcdToken() macro. So, the correct way is PcdGetEx16(&gEfiMdePkgTokenSpaceGuid, PcdToken (PcdPlatformBootTimeOut));. But PcdPlatformBootTimeOut is not configured to DynamicEx PCD in NT32 platform. This style can pass build, but can't work. > >Thanks >Liming >> -----Original Message----- >> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Andrew Fish >> Sent: Thursday, December 14, 2017 6:27 PM >> To: krishnaLee <sssky307@163.com> >> Cc: edk2-devel@lists.01.org >> Subject: Re: [edk2] How to using PcdGetEx to change a PCD. >> >> >> >> > On Dec 14, 2017, at 12:59 AM, krishnaLee <sssky307@163.com> wrote: >> > >> > Hello, >> > I am learning and writing a application to change the Nt32pkg-virtual machine's boot time.follow code is success. >> > but I think if I using PcdGetEx16 function, it will also work well,but failed when I compile it. >> > I had read some Specs about the difference between PcdGetEx and PcdGet,but I can't understand,maybe I need some practice, >> > So can anyone modify it to using PcdGetEx to implement the same function in the application? >> > //source-code--start >> >> Did you add: >> >> #include <Guid/MdePkgTokenSpace.h> >> >> and list gEfiMdePkgTokenSpaceGuid in the [Guids] section of the INF. >> >> In general it is hard to comment on compiler failures in fragments of code. If you post the actual compiler error it is easier to explain. >> >> >> >> The PCDs are a GUID + token number namespace for config. Since anyone can define a GUID that does not conflict it allows arbitrary >> extension without conflict. >> >> The Ex form of the API includes the GUID + token number. The non Ex form is a size optimization that uses a build generated token >> space. So generally if everything is built together then you use the non Ex form to save space. If different binaries that got compiled in >> different places need to work together then the Ex form is required. >> >> Thanks, >> >> Andrew Fish >> >> > EFI_STATUS >> > EFIAPI >> > UefiMain ( >> > IN EFI_HANDLE ImageHandle, >> > IN EFI_SYSTEM_TABLE *SystemTable >> > ) >> > { >> > UINTN buffer=0; >> > UINTN index; >> > buffer=PcdGet16(PcdPlatformBootTimeOut); >> > //buffer=PcdGetEx16(&gEfiMdePkgTokenSpaceGuid,PcdPlatformBootTimeOut);//compile failed. >> > Print(L"buffer:%d\n",buffer); >> > PcdSet16(PcdPlatformBootTimeOut,5); >> > ... >> > >> > >> > //source-code-end. >> > >> > >> > attachment is the full source code. >> > edk2-vUDK2017's build command: >> > build -p Nt32Pkg\Nt32Pkg.dsc -m Nt32Pkg\Application\mytestpcd2\mytestpcd2.inf >> > >> > >> > thank you very much! >> > >> > _______________________________________________ >> > edk2-devel mailing list >> > edk2-devel@lists.01.org <mailto:edk2-devel@lists.01.org> >> > https://lists.01.org/mailman/listinfo/edk2-devel <https://lists.01.org/mailman/listinfo/edk2-devel> >> _______________________________________________ >> edk2-devel mailing list >> edk2-devel@lists.01.org >> https://lists.01.org/mailman/listinfo/edk2-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-12-31 8:43 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2017-12-14 8:59 How to using PcdGetEx to change a PCD krishnaLee 2017-12-14 10:27 ` Andrew Fish 2017-12-14 14:55 ` Gao, Liming 2017-12-28 9:41 ` krishnaLee 2017-12-29 15:26 ` Gao, Liming 2017-12-31 8:47 ` krishnaLee
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox