Hi Abner, Thanks for the explanation! Will keep it without static. Best regards, Igor Get Outlook for Android ________________________________ From: Chang, Abner Sent: Monday, November 6, 2023 8:51:18 PM To: Igor Kulchytskyy ; devel@edk2.groups.io ; M M Cc: Nickle Wang Subject: RE: [EXTERNAL] Re: [edk2-devel] [PATCH] RedfishPkg: RedfishDiscoverDxe: Fix issue if IPv4 installed after RestEx [AMD Official Use Only - General] I would say to have static for a function used by module is a good coding practice and reduce the compile errors for the duplicated function naming, and maybe other advantages I am not quite sure. But from edk2 C coding standard spec perspective, in 5.4.2.2.2, it says function should not be declared STATIC. So my opinion is just keep the function without STATIC. Abner From: Igor Kulchytskyy Sent: Tuesday, November 7, 2023 2:54 AM To: devel@edk2.groups.io; Igor Kulchytskyy ; M M Cc: Chang, Abner ; Nickle Wang Subject: RE: [EXTERNAL] Re: [edk2-devel] [PATCH] RedfishPkg: RedfishDiscoverDxe: Fix issue if IPv4 installed after RestEx Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding. Hi Nickle and Abner, What is your opinion – should we have GetHiIpProtocolType fuction as a static one? Thank you, Igor From: devel@edk2.groups.io > On Behalf Of Igor Kulchytskyy via groups.io Sent: Monday, November 6, 2023 9:14 AM To: M M > Cc: devel@edk2.groups.io; Abner Chang >; Nickle Wang > Subject: [EXTERNAL] Re: [edk2-devel] [PATCH] RedfishPkg: RedfishDiscoverDxe: Fix issue if IPv4 installed after RestEx **CAUTION: The e-mail below is from an external source. Please exercise caution before opening attachments, clicking links, or following guidance.** Hi Mike, See my comments below. Thank you, Igor P.S. “There is no limits to perfection” From: M M > Sent: Sunday, November 05, 2023 9:30 PM To: Igor Kulchytskyy > Cc: devel@edk2.groups.io; Abner Chang >; Nickle Wang > Subject: Re: [EXTERNAL] [edk2-devel] [PATCH] RedfishPkg: RedfishDiscoverDxe: Fix issue if IPv4 installed after RestEx Hi Igor I want to return to my initial comments regarding this patch. Please, find my comments below. On 1. 11. 2023., at 06:24, Igor Kulchytskyy > wrote: Hi Mike, Thank you for review. Please see my answers below the text. -----Original Message----- From: Mike Maslenkin > Sent: Tuesday, October 31, 2023 9:00 PM To: devel@edk2.groups.io; Igor Kulchytskyy > Cc: Abner Chang >; Nickle Wang > Subject: [EXTERNAL] Re: [edk2-devel] [PATCH] RedfishPkg: RedfishDiscoverDxe: Fix issue if IPv4 installed after RestEx **CAUTION: The e-mail below is from an external source. Please exercise caution before opening attachments, clicking links, or following guidance.** Hi Igor please find my comments below. On Tue, Oct 31, 2023 at 8:56 PM Igor Kulchytskyy via groups.io > wrote: Supported function of the driver changed to wait for all newtwork interface to be installed. Filer out the network interfaces which are not supported by Redfish Host Interface. Cc: Abner Chang > Cc: Nickle Wang > Cc: Igor Kulchytskyy > Signed-off-by: Igor Kulchytskyy > --- RedfishPkg/RedfishDiscoverDxe/RedfishDiscoverDxe.c | 96 ++++++++++++++++++-- 1 file changed, 89 insertions(+), 7 deletions(-) diff --git a/RedfishPkg/RedfishDiscoverDxe/RedfishDiscoverDxe.c b/RedfishPkg/RedfishDiscoverDxe/RedfishDiscoverDxe.c index 23da3b968f..a88ad55938 100644 --- a/RedfishPkg/RedfishDiscoverDxe/RedfishDiscoverDxe.c +++ b/RedfishPkg/RedfishDiscoverDxe/RedfishDiscoverDxe.c @@ -322,9 +322,15 @@ GetTargetNetworkInterfaceInternal ( { EFI_REDFISH_DISCOVER_NETWORK_INTERFACE_INTERNAL *ThisNetworkInterface; + if (IsListEmpty(&mEfiRedfishDiscoverNetworkInterface)) { + return NULL; + } + ThisNetworkInterface = (EFI_REDFISH_DISCOVER_NETWORK_INTERFACE_INTERNAL *)GetFirstNode (&mEfiRedfishDiscoverNetworkInterface); while (TRUE) { - if (CompareMem ((VOID *)&ThisNetworkInterface->MacAddress, &TargetNetworkInterface->MacAddress, ThisNetworkInterface->HwAddressSize) == 0) { + if (CompareMem ((VOID *)&ThisNetworkInterface->MacAddress, &TargetNetworkInterface->MacAddress, ThisNetworkInterface->HwAddressSize) == 0 && + ((TargetNetworkInterface->IsIpv6 && ThisNetworkInterface->NetworkProtocolType == ProtocolTypeTcp6) || + (!TargetNetworkInterface->IsIpv6 && ThisNetworkInterface->NetworkProtocolType == ProtocolTypeTcp4))) { return ThisNetworkInterface; } @@ -354,6 +360,10 @@ GetTargetNetworkInterfaceInternalByController ( { EFI_REDFISH_DISCOVER_NETWORK_INTERFACE_INTERNAL *ThisNetworkInterface; + if (IsListEmpty(&mEfiRedfishDiscoverNetworkInterface)) { + return NULL; + } + I also have these two hunks in my pending list. But I suggest to add ASSERT to GetTargetNetworkInterfaceInternal, just because currently it is really impossible situation, and mEfiRedfishDiscoverNetworkInterface was checked before in scope of ValidateTargetNetworkInterface(). Igor: Agree. I also just noticed that even if GetTargetNetworkInterfaceInternal function may return NULL, the return value is not verified on NULL in RedfishServiceAcquireService function. I think we should add this verification. Also I wonder why check patch doesn't complain about missed spaces in "IsListEmpty (&mEfiRedfishDiscoverNetworkInterface)" call for example. ThisNetworkInterface = (EFI_REDFISH_DISCOVER_NETWORK_INTERFACE_INTERNAL *)GetFirstNode (&mEfiRedfishDiscoverNetworkInterface); while (TRUE) { if (ThisNetworkInterface->OpenDriverControllerHandle == ControllerHandle) { @@ -476,6 +486,38 @@ CheckIsIpVersion6 ( return FALSE; } +/** + This function returns the IP type supported by the Host Interface + + @retval IP Type + // Unknown=00h, + // Ipv4=01h, + // Ipv6=02h, + +**/ +UINT8 STATIC ? Igor: WHY? I remembered discussion about STATIC functions usage and why it isn't common in edk2. AFAIR it was because of difficulties with source level debugging for the case when it could be inlined. BTW I won't insist on this here. +GetHiIpProtocolType() +{ + EFI_STATUS Status; + REDFISH_OVER_IP_PROTOCOL_DATA *Data; + REDFISH_INTERFACE_DATA *DeviceDescriptor; + + Data = NULL; + DeviceDescriptor = NULL; + if (mSmbios == NULL) { + Status = gBS->LocateProtocol (&gEfiSmbiosProtocolGuid, NULL, (VOID **)&mSmbios); + if (EFI_ERROR (Status)) { + return 0; In this driver REDFISH_HOST_INTERFACE_HOST_IP_ADDRESS_FORMAT_IP{4,6} used and accessible. so, 0 means REDFISH_HOST_INTERFACE_HOST_IP_ADDRESS_FORMAT_UNKNOWN And these values actually checked in scope of BuildupNetworkInterface() below. Igor: Thank you. Missed that macro. + } + } + Status = RedfishGetHostInterfaceProtocolData (mSmbios, &DeviceDescriptor, &Data); // Search for SMBIOS type 42h + if (!EFI_ERROR (Status) && (Data != NULL) && + (Data->HostIpAssignmentType == RedfishHostIpAssignmentStatic)) { + return Data->HostIpAddressFormat; + } + return 0; Same here, 0 is a magic value for REDFISH_HOST_INTERFACE_HOST_IP_ADDRESS_FORMAT_UNKNOWN +} + /** This function discover Redfish service through SMBIOS host interface. @@ -512,6 +554,15 @@ DiscoverRedfishHostInterface ( Status = RedfishGetHostInterfaceProtocolData (mSmbios, &DeviceDescriptor, &Data); // Search for SMBIOS type 42h if (!EFI_ERROR (Status) && (Data != NULL) && (DeviceDescriptor != NULL)) { + + if (Instance->NetworkInterface->NetworkProtocolType == ProtocolTypeTcp4 && Data->HostIpAddressFormat != REDFISH_HOST_INTERFACE_HOST_IP_ADDRESS_FORMAT_IP4) { // IPv4 case + DEBUG((DEBUG_ERROR, "%a: Network Interface is IPv4, but Host Interface requires Ipv6\n")); Missed argument for %a format Missed space "DEBUG ((" Igor: Inattentiveness. Thank you. + return EFI_UNSUPPORTED; + } + else if (Instance->NetworkInterface->NetworkProtocolType == ProtocolTypeTcp6 && Data->HostIpAddressFormat != REDFISH_HOST_INTERFACE_HOST_IP_ADDRESS_FORMAT_IP6) { // IPv6 case + DEBUG((DEBUG_ERROR, "%a: Network Interface is IPv6, but Host Interface requires IPv4\n")); Missed argument for %a format Missed space "DEBUG ((" Igor: Inattentiveness. Thank you. + return EFI_UNSUPPORTED; + } // // Check if we can reach out Redfish service using this network interface. // Check with MAC address using Device Descriptor Data Device Type 04 and Type 05. @@ -1102,6 +1153,7 @@ RedfishServiceGetNetworkInterface ( OUT EFI_REDFISH_DISCOVER_NETWORK_INTERFACE **NetworkIntfInstances ) { + EFI_STATUS Status; EFI_REDFISH_DISCOVER_NETWORK_INTERFACE_INTERNAL *ThisNetworkInterfaceIntn; EFI_REDFISH_DISCOVER_NETWORK_INTERFACE *ThisNetworkInterface; EFI_REDFISH_DISCOVER_REST_EX_INSTANCE_INTERNAL *RestExInstance; @@ -1141,6 +1193,16 @@ RedfishServiceGetNetworkInterface ( ThisNetworkInterfaceIntn = (EFI_REDFISH_DISCOVER_NETWORK_INTERFACE_INTERNAL *)GetFirstNode (&mEfiRedfishDiscoverNetworkInterface); while (TRUE) { + // If Get Subnet Info skip this interface + Status = NetworkInterfaceGetSubnetInfo (ThisNetworkInterfaceIntn, ImageHandle); // Get subnet info + if (EFI_ERROR(Status)) { + if (IsNodeAtEnd (&mEfiRedfishDiscoverNetworkInterface, &ThisNetworkInterfaceIntn->Entry)) { + break; + } + ThisNetworkInterfaceIntn = (EFI_REDFISH_DISCOVER_NETWORK_INTERFACE_INTERNAL *)GetNextNode (&mEfiRedfishDiscoverNetworkInterface, &ThisNetworkInterfaceIntn->Entry); + continue; + } + ThisNetworkInterface->IsIpv6 = FALSE; if (CheckIsIpVersion6 (ThisNetworkInterfaceIntn)) { ThisNetworkInterface->IsIpv6 = TRUE; @@ -1260,7 +1322,12 @@ RedfishServiceAcquireService ( // Get subnet information in case subnet information is not set because // RedfishServiceGetNetworkInterfaces hasn't been called yet. // - NetworkInterfaceGetSubnetInfo (TargetNetworkInterfaceInternal, ImageHandle); + Status1 = NetworkInterfaceGetSubnetInfo (TargetNetworkInterfaceInternal, ImageHandle); + if (EFI_ERROR(Status1)) { + DEBUG ((DEBUG_ERROR, "%a: Get subnet information fail.\n", __func__)); + FreePool(Instance); + continue; + } NewInstance = TRUE; } @@ -1535,7 +1602,7 @@ TestForRequiredProtocols ( UINT32 *Id; UINTN Index; EFI_STATUS Status; - UINTN ListCount; + UINTN ListCount, SuccessfulCount = 0; ListCount = (sizeof (gRequiredProtocol) / sizeof (REDFISH_DISCOVER_REQUIRED_PROTOCOL)); for (Index = 0; Index < ListCount; Index++) { @@ -1557,13 +1624,14 @@ TestForRequiredProtocols ( EFI_OPEN_PROTOCOL_GET_PROTOCOL ); if (EFI_ERROR (Status)) { - if (Index == ListCount - 1) { - DEBUG ((DEBUG_INFO, "%a: all required protocols are found on this controller handle: %p.\n", __func__, ControllerHandle)); - return EFI_SUCCESS; - } + SuccessfulCount++; } It may be SuccessfulCount must have one indentation less, i.e in scope of upper "if (!EFI_ERROR (Status)) {", not in scope of "if (EFI_ERROR (Status)) {" in context. Igor: We need TestForRequiredProtocols return SUCCESS when all protocols listed in gRequiredProtocol installed. When this happened the BuildupNetworkInterface function would be called, and we iterate through gRequiredProtocol array and build network interfaces. We also install DiscoveredProtocolGuid to prevent BuildupNetworkInterface to be called after that. If we have SuccessfulCount in scope of upper "if (!EFI_ERROR (Status)) {", then BuildupNetworkInterface will be called if something installed on that ControllerHandle, like DNS protocol, for example. Yes, I understand this... but it's still illogical, taking in account variable name. I mean if (EFI_ERROR (Status)) {SuccessfulCount++}; Here we increase SuccessfulCount for the case "Cond1 && !Cond2", and return EFI_SUCCESS only if it is true for all gRequiredProtocol entries, i.e 3 times. Wouldn't it be better to rewrite this code to smth like the following: { UINT32 *Id; UINTN Index; EFI_STATUS Status; for (Index = 0; Index < ARRAY_SIZE (gRequiredProtocol); Index++) { Status = gBS->OpenProtocol ( ControllerHandle, gRequiredProtocol[Index].RequiredServiceBindingProtocolGuid, NULL, This->DriverBindingHandle, ControllerHandle, EFI_OPEN_PROTOCOL_TEST_PROTOCOL ); if (EFI_ERROR (Status)) { return EFI_UNSUPPORTED; } Status = gBS->OpenProtocol ( ControllerHandle, gRequiredProtocol[Index].DiscoveredProtocolGuid, (VOID **)&Id, This->DriverBindingHandle, ControllerHandle, EFI_OPEN_PROTOCOL_GET_PROTOCOL ); if (!EFI_ERROR (Status)) { // Already installed return EFI_UNSUPPORTED; } } DEBUG ((DEBUG_MANAGEABILITY, "%a: all required protocols are found on this controller handle: %p.\n", __func__, ControllerHandle)); return EFI_SUCCESS; } ? No unnecessary variables, less indentation + this function is called from RedfishDiscoverDriverBindingSupported(), i.e very often, so we just reduce number of useless loop iterations and OpenProtocol() calls. Igor: I agree, the optimization you suggested is good. Regards, Mike. -The information contained in this message may be confidential and proprietary to American Megatrends (AMI). This communication is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. Please promptly notify the sender by reply e-mail or by telephone at 770-246-8600, and then delete or destroy all copies of the transmission. -The information contained in this message may be confidential and proprietary to American Megatrends (AMI). This communication is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. Please promptly notify the sender by reply e-mail or by telephone at 770-246-8600, and then delete or destroy all copies of the transmission. -The information contained in this message may be confidential and proprietary to American Megatrends (AMI). This communication is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. Please promptly notify the sender by reply e-mail or by telephone at 770-246-8600, and then delete or destroy all copies of the transmission. -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#110784): https://edk2.groups.io/g/devel/message/110784 Mute This Topic: https://groups.io/mt/102303105/7686176 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io] -=-=-=-=-=-=-=-=-=-=-=-