From: "Michael D Kinney" <michael.d.kinney@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"abner.chang@amd.com" <abner.chang@amd.com>
Cc: "Gao, Liming" <gaoliming@byosoft.com.cn>,
"Liu, Zhiguang" <zhiguang.liu@intel.com>,
Nickle Wang <nicklew@nvidia.com>,
Igor Kulchytskyy <igork@ami.com>,
"Oram, Isaac W" <isaac.w.oram@intel.com>,
Abdul Lateef Attar <AbdulLateef.Attar@amd.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>
Subject: Re: [edk2-devel] [PATCH] MdePkg/Include: Add DMTF PLDM Base definitions
Date: Tue, 18 Apr 2023 17:49:52 +0000 [thread overview]
Message-ID: <CO1PR11MB492944D593040B38913E3FB2D29D9@CO1PR11MB4929.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20230402015155.147-1-abner.chang@amd.com>
I see PldmSmbiosTransfer.h includes this file. Are there any other files that will include this file?
Could this content be folded into PldmSmbiosTransfer.h to reduce total number of include files?
Mike
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Chang, Abner via groups.io
> Sent: Saturday, April 1, 2023 6:52 PM
> To: devel@edk2.groups.io
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming <gaoliming@byosoft.com.cn>; Liu, Zhiguang
> <zhiguang.liu@intel.com>; Nickle Wang <nicklew@nvidia.com>; Igor Kulchytskyy <igork@ami.com>; Oram, Isaac W
> <isaac.w.oram@intel.com>; Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
> Subject: [edk2-devel] [PATCH] MdePkg/Include: Add DMTF PLDM Base definitions
>
> From: Abner Chang <abner.chang@amd.com>
>
> BZ #4396
> This change adds definitions for DMTF PLDM
> base specification.
>
> Spec ref:
> https://www.dmtf.org/sites/default/files/standards/documents/DSP0240_1.1.0.pdf
>
> Signed-off-by: Abner Chang <abner.chang@amd.com>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> Cc: Nickle Wang <nicklew@nvidia.com>
> Cc: Igor Kulchytskyy <igork@ami.com>
> Cc: Isaac Oram <isaac.w.oram@intel.com>
> Cc: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
> ---
> MdePkg/Include/IndustryStandard/Pldm.h | 81 ++++++++++++++++++++++++++
> 1 file changed, 81 insertions(+)
> create mode 100644 MdePkg/Include/IndustryStandard/Pldm.h
>
> diff --git a/MdePkg/Include/IndustryStandard/Pldm.h b/MdePkg/Include/IndustryStandard/Pldm.h
> new file mode 100644
> index 00000000000..82d65b71874
> --- /dev/null
> +++ b/MdePkg/Include/IndustryStandard/Pldm.h
> @@ -0,0 +1,81 @@
> +/**
> + The definitions of DMTF Platform Level Data Model (PLDM)
> + Base Specification.
> +
> + Copyright (C) 2023 Advanced Micro Devices, Inc. All rights reserved.
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> + @par Revision Reference:
> + DMTF Platform Level Data Model (PLDM) Base Specification
> + Version 1.1.0
> + https://www.dmtf.org/sites/default/files/standards/documents/DSP0240_1.1.0.pdf
> +
> +**/
> +
> +#ifndef PLDM_H_
> +#define PLDM_H_
> +
> +#pragma pack(1)
> +
> +#define PLDM_MESSAGE_HEADER_VERSION 0
> +
> +///
> +/// General definitions from Platform Level Data Model (PLDM) Base
> +/// Specification (DMTF DSP0240)
> +///
> +typedef struct {
> + UINT8 InstanceId : 5; ///< Request instance ID.
> + UINT8 Reserved : 1; ///< Reserved bit.
> + UINT8 DatagramBit : 1; ///< used to indicate whether the Instance ID field is
> + ///< being used for tracking and matching requests and
> + ///< responses, or just being used for asynchronous
> + ///< notifications.
> + UINT8 RequestBit : 1; ///< Request bit.
> + UINT8 PldmType : 6; ///< PLDM message type.
> + UINT8 HeaderVersion : 2; ///< Header version.
> + UINT8 PldmTypeCommandCode; ///< The command code of PLDM message type.
> +} PLDM_MESSAGE_HEADER;
> +
> +typedef PLDM_MESSAGE_HEADER PLDM_REQUEST_HEADER;
> +
> +#define PLDM_MESSAGE_HEADER_IS_REQUEST 1
> +#define PLDM_MESSAGE_HEADER_IS_DATAGRAM 1
> +#define PLDM_MESSAGE_HEADER_INSTANCE_ID_MASK 0x1f
> +
> +typedef struct {
> + PLDM_MESSAGE_HEADER PldmHeader;
> + UINT8 PldmCompletionCode; ///< PLDM completion of response message.
> +} PLDM_RESPONSE_HEADER;
> +
> +#pragma pack()
> +
> +#define PLDM_HEADER_VERSION 0x00
> +
> +#define PLDM_COMPLETION_CODE_SUCCESS 0x00
> +#define PLDM_COMPLETION_CODE_ERROR 0x01
> +#define PLDM_COMPLETION_CODE_ERROR_INVALID_DATA 0x02
> +#define PLDM_COMPLETION_CODE_ERROR_INVALID_LENGTH 0x03
> +#define PLDM_COMPLETION_CODE_ERROR_NOT_READY 0x04
> +#define PLDM_COMPLETION_CODE_ERROR_UNSUPPORTED_PLDM_CMD 0x05
> +#define PLDM_COMPLETION_CODE_ERROR_INVALID_PLDM_TYPE 0x20
> +#define PLDM_COMPLETION_CODE_SPECIFIC_START 0x80
> +#define PLDM_COMPLETION_CODE_SPECIFIC_END 0xff
> +
> +///
> +/// Type Code definitions from Platform Level Data Model (PLDM) IDs
> +/// and Codes Specification (DMTF DSP0245)
> +/// https://www.dmtf.org/sites/default/files/standards/documents/DSP0245_1.3.0.pdf
> +///
> +#define PLDM_TYPE_MESSAGE_CONTROL_AND_DISCOVERY 0x00
> +#define PLDM_TYPE_SMBIOS 0x01
> +#define PLDM_TYPE_PLATFORM_MONITORING_AND_CONTROL 0x02
> +#define PLDM_TYPE_BIOS_CONTROL_AND_CONFIGURATION 0x03
> +
> +#define PLDM_TRANSFER_FLAG_START 0x01
> +#define PLDM_TRANSFER_FLAG_MIDDLE 0x02
> +#define PLDM_TRANSFER_FLAG_END 0x04
> +#define PLDM_TRANSFER_FLAG_START_AND_END 0x05
> +
> +#define PLDM_TRANSFER_OPERATION_FLAG_GET_NEXT_PART 0x00
> +#define PLDM_TRANSFER_OPERATION_FLAG_GET_FIRST_PART 0x01
> +#endif // PLDM_H_
> --
> 2.37.1.windows.1
>
>
>
>
>
next prev parent reply other threads:[~2023-04-18 17:49 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-02 1:51 [PATCH] MdePkg/Include: Add DMTF PLDM Base definitions Chang, Abner
2023-04-18 17:49 ` Michael D Kinney [this message]
2023-04-19 2:13 ` [edk2-devel] " Chang, Abner
2023-04-19 15:05 ` Michael D Kinney
2023-04-20 3:24 ` Chang, Abner
2023-04-21 1:43 ` Michael D Kinney
[not found] <1751FB35BEA4DD5D.3578@groups.io>
2023-04-18 3:11 ` Chang, Abner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CO1PR11MB492944D593040B38913E3FB2D29D9@CO1PR11MB4929.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox