* [edk2-devel] [edk2-libc Patch 0/1] add rdmsr_ex & wrmsr_ex functions to read/write msrs from specific cpu
@ 2024-04-10 6:18 Jayaprakash, N
2024-04-10 6:18 ` [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs Jayaprakash, N
[not found] ` <17C4D6CE42E68D40.16800@groups.io>
0 siblings, 2 replies; 9+ messages in thread
From: Jayaprakash, N @ 2024-04-10 6:18 UTC (permalink / raw)
To: devel; +Cc: Jayaprakash N
This patch adds 2 new functions to read and write msrs from specific CPUs.
rdmsr_ex and wrmsr_ex are the 2 new functions added into edk2module to
provide the read and write of CPU specific MSRs.
Jayaprakash N (1):
edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific
msrs
.../PyMod-3.6.8/Modules/edk2module.c | 159 +++++++++++++++++-
.../Python/Python-3.6.8/Python368.inf | 3 +
2 files changed, 158 insertions(+), 4 deletions(-)
--
2.40.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#117569): https://edk2.groups.io/g/devel/message/117569
Mute This Topic: https://groups.io/mt/105437324/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 9+ messages in thread
* [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs
2024-04-10 6:18 [edk2-devel] [edk2-libc Patch 0/1] add rdmsr_ex & wrmsr_ex functions to read/write msrs from specific cpu Jayaprakash, N
@ 2024-04-10 6:18 ` Jayaprakash, N
[not found] ` <17C4D6CE42E68D40.16800@groups.io>
1 sibling, 0 replies; 9+ messages in thread
From: Jayaprakash, N @ 2024-04-10 6:18 UTC (permalink / raw)
To: devel; +Cc: Jayaprakash N, Rebecca Cran, Michael D Kinney
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4746
The rdmsr_ex and wrmsr_ex are extension APIs to the rdmsr and wrmsr APIs
supported in edk2 module. These extension APIs makes it possible
to read / write MSRs from specific processors and fills an existing gap
in this area.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jayaprakash N <n.jayaprakash@intel.com>
Signed-off-by: Jayaprakash N <n.jayaprakash@intel.com>
---
.../PyMod-3.6.8/Modules/edk2module.c | 159 +++++++++++++++++-
.../Python/Python-3.6.8/Python368.inf | 3 +
2 files changed, 158 insertions(+), 4 deletions(-)
diff --git a/AppPkg/Applications/Python/Python-3.6.8/PyMod-3.6.8/Modules/edk2module.c b/AppPkg/Applications/Python/Python-3.6.8/PyMod-3.6.8/Modules/edk2module.c
index d6af8da..f1b13a6 100644
--- a/AppPkg/Applications/Python/Python-3.6.8/PyMod-3.6.8/Modules/edk2module.c
+++ b/AppPkg/Applications/Python/Python-3.6.8/PyMod-3.6.8/Modules/edk2module.c
@@ -3,7 +3,7 @@
Derived from posixmodule.c in Python 2.7.2.
Copyright (c) 2015, Daryl McDaniel. All rights reserved.<BR>
- Copyright (c) 2011 - 2023, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2011 - 2024, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available under
the terms and conditions of the BSD License that accompanies this distribution.
The full text of the license may be found at
@@ -22,16 +22,23 @@
#include <wchar.h>
#include <sys/syslimits.h>
#include <Uefi.h>
+#include <Pi/PiDxeCis.h> // Needed for the definition of EFI_AP_PROCEDURE
#include <Library/UefiLib.h>
#include <Library/PciLib.h>
#include <Library/IoLib.h>
#include <Library/UefiRuntimeServicesTableLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Protocol/MpService.h>
#ifdef __cplusplus
extern "C" {
#endif
PyTypeObject EfiGuidType;
+EFI_MP_SERVICES_PROTOCOL *gpMpService = NULL;
+UINTN gBSPProcessorNumber = 0;
+UINTN gNumberOfProcessors = 0;
+UINTN gNumberOfEnabledProcessors = 0;
extern void _swsmi( unsigned int smi_code_data, unsigned int rax_value, unsigned int rbx_value, unsigned int rcx_value, unsigned int rdx_value, unsigned int rsi_value, unsigned int rdi_value );
// -- Support routines
@@ -169,6 +176,35 @@ PyDoc_STRVAR(edk2__doc__,
/* dummy version. _PyVerify_fd() is already defined in fileobject.h */
#define _PyVerify_fd_dup2(A, B) (1)
+static EFI_STATUS
+MpServicesWhoAmI (
+ IN EFI_MP_SERVICES_PROTOCOL *pMpService,
+ OUT UINTN *pProcessorNumber
+ )
+{
+ return pMpService->WhoAmI (pMpService, pProcessorNumber);
+}
+
+static EFI_STATUS
+MpServicesGetNumberOfProcessors (
+ IN EFI_MP_SERVICES_PROTOCOL *pMpService,
+ OUT UINTN *pNumberOfProcessors,
+ OUT UINTN *pNumberOfEnabledProcessors
+
+ )
+{
+ return pMpService->GetNumberOfProcessors (pMpService, pNumberOfProcessors, pNumberOfEnabledProcessors);
+}
+
+static EFI_STATUS
+MpServicesSwitchBSP (
+ IN EFI_MP_SERVICES_PROTOCOL *pMpService,
+ IN UINTN ProcessorNumber
+ )
+{
+ return pMpService->SwitchBSP(pMpService, ProcessorNumber, TRUE);
+}
+
#ifndef UEFI_C_SOURCE
/* Return a dictionary corresponding to the POSIX environment table */
extern char **environ;
@@ -3865,6 +3901,56 @@ edk2_rdmsr(PyObject *self, PyObject *args)
return Py_BuildValue("(II)", (unsigned long)veax, (unsigned long)vedx);
}
+PyDoc_STRVAR(efi_rdmsr_ex__doc__,
+"rdmsr_ex(cpu, msr) -> (lower_32bits, higher_32bits)\n\
+\n\
+Read the given msr by switching to cpu and return the data as tuple.\n\
+\n\
+Parameters:\n\
+ cpu - The cpu number in hex or int format\n\
+ msr - The msr in hex or int format\n\
+\n\
+Return Value:\n\
+ a tuple with lower and higher 32 bit values read from the msr\n\
+");
+
+static PyObject *
+edk2_rdmsr_ex(PyObject *self, PyObject *args)
+{
+ unsigned int cpu, vecx, veax, vedx;
+ unsigned int bsp_switched = 0;
+ EFI_STATUS status = 0;
+ UINT64 data = 0;
+
+ if (!PyArg_ParseTuple(args, "II", &cpu, &vecx))
+ return NULL;
+
+ Py_BEGIN_ALLOW_THREADS
+ if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors)
+ {
+ //switch the BSP to the cpu
+ status = MpServicesSwitchBSP(gpMpService, cpu);
+ if (!EFI_ERROR(status))
+ {
+ bsp_switched = 1;
+ }
+ }
+
+ data = AsmReadMsr64(vecx);
+
+ if (bsp_switched)
+ {
+ // switch BSP to the saved BSP processor
+ MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
+ // update the saved BSP processor
+ MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
+ }
+ Py_END_ALLOW_THREADS
+ veax = (UINT32)data;
+ vedx = (UINT64)data >> 32;
+ return Py_BuildValue("(II)", (unsigned long)veax, (unsigned long)vedx);
+}
+
PyDoc_STRVAR(efi_wrmsr__doc__,
"wrmsr(msr, lower_32bits, higher_32bits) -> None\n\
\n\
@@ -3889,6 +3975,58 @@ edk2_wrmsr(PyObject *self, PyObject *args)
data = vedx << 32 | veax;
Py_BEGIN_ALLOW_THREADS
AsmWriteMsr64(vecx, data);
+ Py_END_ALLOW_THREADS
+ Py_INCREF(Py_None);
+ return Py_None;
+}
+
+PyDoc_STRVAR(efi_wrmsr_ex__doc__,
+"wrmsr_ex(cpu, msr, lower_32bits, higher_32bits) -> None\n\
+\n\
+Writes higher_32bits:lower_32bits to the given msr.\n\
+\n\
+Parameters:\n\
+ cpu - The cpu number in hex or int format\n\
+ msr - The msr in hex or int format\n\
+ lower_32bits - The lower 32 bit data for the msr\n\
+ higher_32bits - The higher 32 bit data for the msr\n\
+\n\
+Return Value:\n\
+ None\n\
+");
+
+static PyObject *
+edk2_wrmsr_ex(PyObject *self, PyObject *args)
+{
+ unsigned int cpu, msr, veax, vedx;
+ unsigned int bsp_switched = 0;
+ EFI_STATUS status = 0;
+ UINT64 data = 0;
+
+ if (!PyArg_ParseTuple(args, "IIII", &cpu, &msr, &veax, &vedx))
+ return NULL;
+ data = (((UINT64)vedx) << 32) | veax;
+
+ Py_BEGIN_ALLOW_THREADS
+ if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors)
+ {
+ //switch the BSP to the cpu
+ status = MpServicesSwitchBSP(gpMpService, cpu);
+ if (!EFI_ERROR(status))
+ {
+ bsp_switched = 1;
+ }
+ }
+ // write to MSR
+ AsmWriteMsr64(msr, data);
+
+ if (bsp_switched)
+ {
+ // switch BSP to the saved BSP processor
+ MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
+ // update the saved BSP processor
+ MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
+ }
Py_END_ALLOW_THREADS
Py_INCREF(Py_None);
return Py_None;
@@ -4576,7 +4714,9 @@ static PyMethodDef edk2_methods[] = {
#endif
{"abort", edk2_abort, METH_NOARGS, edk2_abort__doc__},
{"rdmsr", edk2_rdmsr, METH_VARARGS, efi_rdmsr__doc__},
+ {"rdmsr_ex", edk2_rdmsr_ex, METH_VARARGS, efi_rdmsr_ex__doc__},
{"wrmsr", edk2_wrmsr, METH_VARARGS, efi_wrmsr__doc__},
+ {"wrmsr_ex", edk2_wrmsr_ex, METH_VARARGS, efi_wrmsr_ex__doc__},
{"readpci", edk2_readpci, METH_VARARGS, efi_readpci__doc__},
{"writepci", edk2_writepci, METH_VARARGS, efi_writepci__doc__},
{"readmem", posix_readmem, METH_VARARGS, efi_readmem__doc__},
@@ -4813,13 +4953,24 @@ static struct PyModuleDef edk2module = {
PyMODINIT_FUNC
PyEdk2__Init(void)
{
- PyObject *m;
+ PyObject *m;
+ EFI_STATUS Status = 0;
#ifndef UEFI_C_SOURCE
PyObject *v;
#endif
+ Status = gBS->LocateProtocol(&gEfiMpServiceProtocolGuid, NULL, &gpMpService);
+ if (EFI_ERROR(Status))
+ {
+ printf("Unable to locate the Protocol MpServices protocol: %r\n", Status);
+ return NULL;
+ }
+ // Get the current BSP processor number
+ MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
+ // Get the number of processors
+ MpServicesGetNumberOfProcessors(gpMpService, &gNumberOfProcessors, &gNumberOfEnabledProcessors);
- m = PyModule_Create(&edk2module);
+ m = PyModule_Create(&edk2module);
if (m == NULL)
return m;
@@ -4870,7 +5021,7 @@ PyEdk2__Init(void)
//PyModule_AddObject(m, "statvfs_result",
// (PyObject*) &StatVFSResultType);
initialized = 1;
- return m;
+ return m;
}
diff --git a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
index 8b7f677..eca98b5 100644
--- a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
+++ b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
@@ -46,6 +46,9 @@
#BsdSocketLib
#EfiSocketLib
+[Protocols]
+ gEfiMpServiceProtocolGuid ## CONSUMES
+
[FixedPcd]
gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x0F
gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000040
--
2.40.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#117570): https://edk2.groups.io/g/devel/message/117570
Mute This Topic: https://groups.io/mt/105437325/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs
[not found] ` <17C4D6CE42E68D40.16800@groups.io>
@ 2024-04-15 5:32 ` Jayaprakash, N
2024-04-17 18:38 ` Michael D Kinney
0 siblings, 1 reply; 9+ messages in thread
From: Jayaprakash, N @ 2024-04-15 5:32 UTC (permalink / raw)
To: devel@edk2.groups.io, Jayaprakash, N; +Cc: Rebecca Cran, Kinney, Michael D
+ Rebecca and Mike,
Would you be able to review this PR?
Regards,
JP
-----Original Message-----
From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Jayaprakash, N
Sent: Wednesday, April 10, 2024 11:49 AM
To: devel@edk2.groups.io
Cc: Jayaprakash, N <n.jayaprakash@intel.com>; Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D <michael.d.kinney@intel.com>
Subject: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4746
The rdmsr_ex and wrmsr_ex are extension APIs to the rdmsr and wrmsr APIs supported in edk2 module. These extension APIs makes it possible to read / write MSRs from specific processors and fills an existing gap in this area.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jayaprakash N <n.jayaprakash@intel.com>
Signed-off-by: Jayaprakash N <n.jayaprakash@intel.com>
---
.../PyMod-3.6.8/Modules/edk2module.c | 159 +++++++++++++++++-
.../Python/Python-3.6.8/Python368.inf | 3 +
2 files changed, 158 insertions(+), 4 deletions(-)
diff --git a/AppPkg/Applications/Python/Python-3.6.8/PyMod-3.6.8/Modules/edk2module.c b/AppPkg/Applications/Python/Python-3.6.8/PyMod-3.6.8/Modules/edk2module.c
index d6af8da..f1b13a6 100644
--- a/AppPkg/Applications/Python/Python-3.6.8/PyMod-3.6.8/Modules/edk2module.c
+++ b/AppPkg/Applications/Python/Python-3.6.8/PyMod-3.6.8/Modules/edk2mo
+++ dule.c
@@ -3,7 +3,7 @@
Derived from posixmodule.c in Python 2.7.2.
Copyright (c) 2015, Daryl McDaniel. All rights reserved.<BR>
- Copyright (c) 2011 - 2023, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2011 - 2024, Intel Corporation. All rights
+ reserved.<BR>
This program and the accompanying materials are licensed and made available under
the terms and conditions of the BSD License that accompanies this distribution.
The full text of the license may be found at @@ -22,16 +22,23 @@ #include <wchar.h> #include <sys/syslimits.h> #include <Uefi.h>
+#include <Pi/PiDxeCis.h> // Needed for the definition of EFI_AP_PROCEDURE
#include <Library/UefiLib.h>
#include <Library/PciLib.h>
#include <Library/IoLib.h>
#include <Library/UefiRuntimeServicesTableLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Protocol/MpService.h>
#ifdef __cplusplus
extern "C" {
#endif
PyTypeObject EfiGuidType;
+EFI_MP_SERVICES_PROTOCOL *gpMpService = NULL;
+UINTN gBSPProcessorNumber = 0;
+UINTN gNumberOfProcessors = 0;
+UINTN gNumberOfEnabledProcessors = 0;
extern void _swsmi( unsigned int smi_code_data, unsigned int rax_value, unsigned int rbx_value, unsigned int rcx_value, unsigned int rdx_value, unsigned int rsi_value, unsigned int rdi_value ); // -- Support routines @@ -169,6 +176,35 @@ PyDoc_STRVAR(edk2__doc__,
/* dummy version. _PyVerify_fd() is already defined in fileobject.h */ #define _PyVerify_fd_dup2(A, B) (1)
+static EFI_STATUS
+MpServicesWhoAmI (
+ IN EFI_MP_SERVICES_PROTOCOL *pMpService,
+ OUT UINTN *pProcessorNumber
+ )
+{
+ return pMpService->WhoAmI (pMpService, pProcessorNumber); }
+
+static EFI_STATUS
+MpServicesGetNumberOfProcessors (
+ IN EFI_MP_SERVICES_PROTOCOL *pMpService,
+ OUT UINTN *pNumberOfProcessors,
+ OUT UINTN *pNumberOfEnabledProcessors
+
+ )
+{
+ return pMpService->GetNumberOfProcessors (pMpService,
+pNumberOfProcessors, pNumberOfEnabledProcessors); }
+
+static EFI_STATUS
+MpServicesSwitchBSP (
+ IN EFI_MP_SERVICES_PROTOCOL *pMpService,
+ IN UINTN ProcessorNumber
+ )
+{
+ return pMpService->SwitchBSP(pMpService, ProcessorNumber, TRUE); }
+
#ifndef UEFI_C_SOURCE
/* Return a dictionary corresponding to the POSIX environment table */ extern char **environ; @@ -3865,6 +3901,56 @@ edk2_rdmsr(PyObject *self, PyObject *args)
return Py_BuildValue("(II)", (unsigned long)veax, (unsigned long)vedx); }
+PyDoc_STRVAR(efi_rdmsr_ex__doc__,
+"rdmsr_ex(cpu, msr) -> (lower_32bits, higher_32bits)\n\ \n\ Read the
+given msr by switching to cpu and return the data as tuple.\n\ \n\
+Parameters:\n\
+ cpu - The cpu number in hex or int format\n\
+ msr - The msr in hex or int format\n\ \n\ Return Value:\n\
+ a tuple with lower and higher 32 bit values read from the msr\n\
+");
+
+static PyObject *
+edk2_rdmsr_ex(PyObject *self, PyObject *args) {
+ unsigned int cpu, vecx, veax, vedx;
+ unsigned int bsp_switched = 0;
+ EFI_STATUS status = 0;
+ UINT64 data = 0;
+
+ if (!PyArg_ParseTuple(args, "II", &cpu, &vecx))
+ return NULL;
+
+ Py_BEGIN_ALLOW_THREADS
+ if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors) {
+ //switch the BSP to the cpu
+ status = MpServicesSwitchBSP(gpMpService, cpu);
+ if (!EFI_ERROR(status))
+ {
+ bsp_switched = 1;
+ }
+ }
+
+ data = AsmReadMsr64(vecx);
+
+ if (bsp_switched)
+ {
+ // switch BSP to the saved BSP processor
+ MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
+ // update the saved BSP processor
+ MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
+ }
+ Py_END_ALLOW_THREADS
+ veax = (UINT32)data;
+ vedx = (UINT64)data >> 32;
+ return Py_BuildValue("(II)", (unsigned long)veax, (unsigned
+long)vedx); }
+
PyDoc_STRVAR(efi_wrmsr__doc__,
"wrmsr(msr, lower_32bits, higher_32bits) -> None\n\ \n\ @@ -3889,6 +3975,58 @@ edk2_wrmsr(PyObject *self, PyObject *args)
data = vedx << 32 | veax;
Py_BEGIN_ALLOW_THREADS
AsmWriteMsr64(vecx, data);
+ Py_END_ALLOW_THREADS
+ Py_INCREF(Py_None);
+ return Py_None;
+}
+
+PyDoc_STRVAR(efi_wrmsr_ex__doc__,
+"wrmsr_ex(cpu, msr, lower_32bits, higher_32bits) -> None\n\ \n\ Writes
+higher_32bits:lower_32bits to the given msr.\n\ \n\ Parameters:\n\
+ cpu - The cpu number in hex or int format\n\
+ msr - The msr in hex or int format\n\
+ lower_32bits - The lower 32 bit data for the msr\n\
+ higher_32bits - The higher 32 bit data for the msr\n\ \n\ Return
+Value:\n\
+ None\n\
+");
+
+static PyObject *
+edk2_wrmsr_ex(PyObject *self, PyObject *args) {
+ unsigned int cpu, msr, veax, vedx;
+ unsigned int bsp_switched = 0;
+ EFI_STATUS status = 0;
+ UINT64 data = 0;
+
+ if (!PyArg_ParseTuple(args, "IIII", &cpu, &msr, &veax, &vedx))
+ return NULL;
+ data = (((UINT64)vedx) << 32) | veax;
+
+ Py_BEGIN_ALLOW_THREADS
+ if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors) {
+ //switch the BSP to the cpu
+ status = MpServicesSwitchBSP(gpMpService, cpu);
+ if (!EFI_ERROR(status))
+ {
+ bsp_switched = 1;
+ }
+ }
+ // write to MSR
+ AsmWriteMsr64(msr, data);
+
+ if (bsp_switched)
+ {
+ // switch BSP to the saved BSP processor
+ MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
+ // update the saved BSP processor
+ MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber); }
Py_END_ALLOW_THREADS
Py_INCREF(Py_None);
return Py_None;
@@ -4576,7 +4714,9 @@ static PyMethodDef edk2_methods[] = { #endif
{"abort", edk2_abort, METH_NOARGS, edk2_abort__doc__},
{"rdmsr", edk2_rdmsr, METH_VARARGS, efi_rdmsr__doc__},
+ {"rdmsr_ex", edk2_rdmsr_ex, METH_VARARGS, efi_rdmsr_ex__doc__},
{"wrmsr", edk2_wrmsr, METH_VARARGS, efi_wrmsr__doc__},
+ {"wrmsr_ex", edk2_wrmsr_ex, METH_VARARGS, efi_wrmsr_ex__doc__},
{"readpci", edk2_readpci, METH_VARARGS, efi_readpci__doc__},
{"writepci", edk2_writepci, METH_VARARGS, efi_writepci__doc__},
{"readmem", posix_readmem, METH_VARARGS, efi_readmem__doc__},
@@ -4813,13 +4953,24 @@ static struct PyModuleDef edk2module = { PyMODINIT_FUNC
PyEdk2__Init(void)
{
- PyObject *m;
+ PyObject *m;
+ EFI_STATUS Status = 0;
#ifndef UEFI_C_SOURCE
PyObject *v;
#endif
+ Status = gBS->LocateProtocol(&gEfiMpServiceProtocolGuid, NULL, &gpMpService);
+ if (EFI_ERROR(Status))
+ {
+ printf("Unable to locate the Protocol MpServices protocol: %r\n", Status);
+ return NULL;
+ }
+ // Get the current BSP processor number
+ MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
+ // Get the number of processors
+ MpServicesGetNumberOfProcessors(gpMpService, &gNumberOfProcessors,
+ &gNumberOfEnabledProcessors);
- m = PyModule_Create(&edk2module);
+ m = PyModule_Create(&edk2module);
if (m == NULL)
return m;
@@ -4870,7 +5021,7 @@ PyEdk2__Init(void)
//PyModule_AddObject(m, "statvfs_result",
// (PyObject*) &StatVFSResultType);
initialized = 1;
- return m;
+ return m;
}
diff --git a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
index 8b7f677..eca98b5 100644
--- a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
+++ b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
@@ -46,6 +46,9 @@
#BsdSocketLib
#EfiSocketLib
+[Protocols]
+ gEfiMpServiceProtocolGuid ## CONSUMES
+
[FixedPcd]
gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x0F
gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000040
--
2.40.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#117752): https://edk2.groups.io/g/devel/message/117752
Mute This Topic: https://groups.io/mt/105530360/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs
2024-04-15 5:32 ` Jayaprakash, N
@ 2024-04-17 18:38 ` Michael D Kinney
2024-04-18 3:16 ` Jayaprakash, N
0 siblings, 1 reply; 9+ messages in thread
From: Michael D Kinney @ 2024-04-17 18:38 UTC (permalink / raw)
To: Jayaprakash, N, devel@edk2.groups.io; +Cc: Rebecca Cran, Kinney, Michael D
Hi JP,
Is there a reason switch BSP is being used. That is not a common operation
and is typically used if the current BSP is not stable or there is a good
reason to switch the BSP for OS boot.
The MP Services can be used to execute a C function on APs to execute
MSR related instructions.
Mike
> -----Original Message-----
> From: Jayaprakash, N <n.jayaprakash@intel.com>
> Sent: Sunday, April 14, 2024 10:33 PM
> To: devel@edk2.groups.io; Jayaprakash, N <n.jayaprakash@intel.com>
> Cc: Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>
> Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex
> & wrmsr_ex functions to read/write cpu specific msrs
>
> + Rebecca and Mike,
>
> Would you be able to review this PR?
>
> Regards,
> JP
>
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> Jayaprakash, N
> Sent: Wednesday, April 10, 2024 11:49 AM
> To: devel@edk2.groups.io
> Cc: Jayaprakash, N <n.jayaprakash@intel.com>; Rebecca Cran
> <rebecca@bsdio.com>; Kinney, Michael D <michael.d.kinney@intel.com>
> Subject: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex &
> wrmsr_ex functions to read/write cpu specific msrs
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4746
>
> The rdmsr_ex and wrmsr_ex are extension APIs to the rdmsr and wrmsr
> APIs supported in edk2 module. These extension APIs makes it possible
> to read / write MSRs from specific processors and fills an existing
> gap in this area.
>
> Cc: Rebecca Cran <rebecca@bsdio.com>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Jayaprakash N <n.jayaprakash@intel.com>
> Signed-off-by: Jayaprakash N <n.jayaprakash@intel.com>
> ---
> .../PyMod-3.6.8/Modules/edk2module.c | 159
> +++++++++++++++++-
> .../Python/Python-3.6.8/Python368.inf | 3 +
> 2 files changed, 158 insertions(+), 4 deletions(-)
>
> diff --git a/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> 3.6.8/Modules/edk2module.c b/AppPkg/Applications/Python/Python-
> 3.6.8/PyMod-3.6.8/Modules/edk2module.c
> index d6af8da..f1b13a6 100644
> --- a/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> 3.6.8/Modules/edk2module.c
> +++ b/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> 3.6.8/Modules/edk2mo
> +++ dule.c
> @@ -3,7 +3,7 @@
> Derived from posixmodule.c in Python 2.7.2.
>
> Copyright (c) 2015, Daryl McDaniel. All rights reserved.<BR>
> - Copyright (c) 2011 - 2023, Intel Corporation. All rights
> reserved.<BR>
> + Copyright (c) 2011 - 2024, Intel Corporation. All rights
> + reserved.<BR>
> This program and the accompanying materials are licensed and made
> available under
> the terms and conditions of the BSD License that accompanies this
> distribution.
> The full text of the license may be found at @@ -22,16 +22,23 @@
> #include <wchar.h> #include <sys/syslimits.h> #include <Uefi.h>
> +#include <Pi/PiDxeCis.h> // Needed for the definition of
> EFI_AP_PROCEDURE
> #include <Library/UefiLib.h>
> #include <Library/PciLib.h>
> #include <Library/IoLib.h>
> #include <Library/UefiRuntimeServicesTableLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Protocol/MpService.h>
>
> #ifdef __cplusplus
> extern "C" {
> #endif
>
> PyTypeObject EfiGuidType;
> +EFI_MP_SERVICES_PROTOCOL *gpMpService = NULL;
> +UINTN gBSPProcessorNumber = 0;
> +UINTN gNumberOfProcessors = 0;
> +UINTN gNumberOfEnabledProcessors = 0;
>
> extern void _swsmi( unsigned int smi_code_data, unsigned int
> rax_value, unsigned int rbx_value, unsigned int rcx_value, unsigned
> int rdx_value, unsigned int rsi_value, unsigned int rdi_value ); // -
> - Support routines @@ -169,6 +176,35 @@ PyDoc_STRVAR(edk2__doc__,
> /* dummy version. _PyVerify_fd() is already defined in fileobject.h
> */ #define _PyVerify_fd_dup2(A, B) (1)
>
> +static EFI_STATUS
> +MpServicesWhoAmI (
> + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> + OUT UINTN *pProcessorNumber
> + )
> +{
> + return pMpService->WhoAmI (pMpService, pProcessorNumber); }
> +
> +static EFI_STATUS
> +MpServicesGetNumberOfProcessors (
> + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> + OUT UINTN *pNumberOfProcessors,
> + OUT UINTN *pNumberOfEnabledProcessors
> +
> + )
> +{
> + return pMpService->GetNumberOfProcessors (pMpService,
> +pNumberOfProcessors, pNumberOfEnabledProcessors); }
> +
> +static EFI_STATUS
> +MpServicesSwitchBSP (
> + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> + IN UINTN ProcessorNumber
> + )
> +{
> + return pMpService->SwitchBSP(pMpService, ProcessorNumber, TRUE); }
> +
> #ifndef UEFI_C_SOURCE
> /* Return a dictionary corresponding to the POSIX environment table
> */ extern char **environ; @@ -3865,6 +3901,56 @@ edk2_rdmsr(PyObject
> *self, PyObject *args)
> return Py_BuildValue("(II)", (unsigned long)veax, (unsigned
> long)vedx); }
>
> +PyDoc_STRVAR(efi_rdmsr_ex__doc__,
> +"rdmsr_ex(cpu, msr) -> (lower_32bits, higher_32bits)\n\ \n\ Read the
> +given msr by switching to cpu and return the data as tuple.\n\ \n\
> +Parameters:\n\
> + cpu - The cpu number in hex or int format\n\
> + msr - The msr in hex or int format\n\ \n\ Return Value:\n\
> + a tuple with lower and higher 32 bit values read from the msr\n\
> +");
> +
> +static PyObject *
> +edk2_rdmsr_ex(PyObject *self, PyObject *args) {
> + unsigned int cpu, vecx, veax, vedx;
> + unsigned int bsp_switched = 0;
> + EFI_STATUS status = 0;
> + UINT64 data = 0;
> +
> + if (!PyArg_ParseTuple(args, "II", &cpu, &vecx))
> + return NULL;
> +
> + Py_BEGIN_ALLOW_THREADS
> + if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors) {
> + //switch the BSP to the cpu
> + status = MpServicesSwitchBSP(gpMpService, cpu);
> + if (!EFI_ERROR(status))
> + {
> + bsp_switched = 1;
> + }
> + }
> +
> + data = AsmReadMsr64(vecx);
> +
> + if (bsp_switched)
> + {
> + // switch BSP to the saved BSP processor
> + MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
> + // update the saved BSP processor
> + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
> + }
> + Py_END_ALLOW_THREADS
> + veax = (UINT32)data;
> + vedx = (UINT64)data >> 32;
> + return Py_BuildValue("(II)", (unsigned long)veax, (unsigned
> +long)vedx); }
> +
> PyDoc_STRVAR(efi_wrmsr__doc__,
> "wrmsr(msr, lower_32bits, higher_32bits) -> None\n\ \n\ @@ -3889,6
> +3975,58 @@ edk2_wrmsr(PyObject *self, PyObject *args)
> data = vedx << 32 | veax;
> Py_BEGIN_ALLOW_THREADS
> AsmWriteMsr64(vecx, data);
> + Py_END_ALLOW_THREADS
> + Py_INCREF(Py_None);
> + return Py_None;
> +}
> +
> +PyDoc_STRVAR(efi_wrmsr_ex__doc__,
> +"wrmsr_ex(cpu, msr, lower_32bits, higher_32bits) -> None\n\ \n\
> Writes
> +higher_32bits:lower_32bits to the given msr.\n\ \n\ Parameters:\n\
> + cpu - The cpu number in hex or int format\n\
> + msr - The msr in hex or int format\n\
> + lower_32bits - The lower 32 bit data for the msr\n\
> + higher_32bits - The higher 32 bit data for the msr\n\ \n\ Return
> +Value:\n\
> + None\n\
> +");
> +
> +static PyObject *
> +edk2_wrmsr_ex(PyObject *self, PyObject *args) {
> + unsigned int cpu, msr, veax, vedx;
> + unsigned int bsp_switched = 0;
> + EFI_STATUS status = 0;
> + UINT64 data = 0;
> +
> + if (!PyArg_ParseTuple(args, "IIII", &cpu, &msr, &veax, &vedx))
> + return NULL;
> + data = (((UINT64)vedx) << 32) | veax;
> +
> + Py_BEGIN_ALLOW_THREADS
> + if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors) {
> + //switch the BSP to the cpu
> + status = MpServicesSwitchBSP(gpMpService, cpu);
> + if (!EFI_ERROR(status))
> + {
> + bsp_switched = 1;
> + }
> + }
> + // write to MSR
> + AsmWriteMsr64(msr, data);
> +
> + if (bsp_switched)
> + {
> + // switch BSP to the saved BSP processor
> + MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
> + // update the saved BSP processor
> + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber); }
> Py_END_ALLOW_THREADS
> Py_INCREF(Py_None);
> return Py_None;
> @@ -4576,7 +4714,9 @@ static PyMethodDef edk2_methods[] = { #endif
> {"abort", edk2_abort, METH_NOARGS,
> edk2_abort__doc__},
> {"rdmsr", edk2_rdmsr, METH_VARARGS,
> efi_rdmsr__doc__},
> + {"rdmsr_ex", edk2_rdmsr_ex, METH_VARARGS,
> efi_rdmsr_ex__doc__},
> {"wrmsr", edk2_wrmsr, METH_VARARGS,
> efi_wrmsr__doc__},
> + {"wrmsr_ex", edk2_wrmsr_ex, METH_VARARGS,
> efi_wrmsr_ex__doc__},
> {"readpci", edk2_readpci, METH_VARARGS,
> efi_readpci__doc__},
> {"writepci", edk2_writepci, METH_VARARGS,
> efi_writepci__doc__},
> {"readmem", posix_readmem,
> METH_VARARGS, efi_readmem__doc__},
> @@ -4813,13 +4953,24 @@ static struct PyModuleDef edk2module = {
> PyMODINIT_FUNC
> PyEdk2__Init(void)
> {
> - PyObject *m;
> + PyObject *m;
> + EFI_STATUS Status = 0;
>
> #ifndef UEFI_C_SOURCE
> PyObject *v;
> #endif
> + Status = gBS->LocateProtocol(&gEfiMpServiceProtocolGuid, NULL,
> &gpMpService);
> + if (EFI_ERROR(Status))
> + {
> + printf("Unable to locate the Protocol MpServices protocol:
> %r\n", Status);
> + return NULL;
> + }
> + // Get the current BSP processor number
> + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
> + // Get the number of processors
> + MpServicesGetNumberOfProcessors(gpMpService,
> &gNumberOfProcessors,
> + &gNumberOfEnabledProcessors);
>
> - m = PyModule_Create(&edk2module);
> + m = PyModule_Create(&edk2module);
> if (m == NULL)
> return m;
>
> @@ -4870,7 +5021,7 @@ PyEdk2__Init(void)
> //PyModule_AddObject(m, "statvfs_result",
> // (PyObject*) &StatVFSResultType);
> initialized = 1;
> - return m;
> + return m;
>
> }
>
> diff --git a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> index 8b7f677..eca98b5 100644
> --- a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> +++ b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> @@ -46,6 +46,9 @@
> #BsdSocketLib
> #EfiSocketLib
>
> +[Protocols]
> + gEfiMpServiceProtocolGuid ## CONSUMES
> +
> [FixedPcd]
> gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x0F
> gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000040
> --
> 2.40.0.windows.1
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#117930): https://edk2.groups.io/g/devel/message/117930
Mute This Topic: https://groups.io/mt/105530360/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs
2024-04-17 18:38 ` Michael D Kinney
@ 2024-04-18 3:16 ` Jayaprakash, N
2024-04-18 5:16 ` Michael D Kinney
0 siblings, 1 reply; 9+ messages in thread
From: Jayaprakash, N @ 2024-04-18 3:16 UTC (permalink / raw)
To: Kinney, Michael D, devel@edk2.groups.io; +Cc: Rebecca Cran
In the validation and debug scenarios, engineers tend to read MSRs and write to MSRs of different CPUs.
So we are providing a simple mechanism through these APIs to enable them to do these operations.
These APIs will be part of the edk2 module of the Python interpreter and will be used during the validation and debug scenarios only.
This is not for switching the BSP for OS boot. This is only used during the validation and debug use cases.
Regards,
JP
-----Original Message-----
From: Kinney, Michael D <michael.d.kinney@intel.com>
Sent: Thursday, April 18, 2024 12:08 AM
To: Jayaprakash, N <n.jayaprakash@intel.com>; devel@edk2.groups.io
Cc: Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D <michael.d.kinney@intel.com>
Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs
Hi JP,
Is there a reason switch BSP is being used. That is not a common operation and is typically used if the current BSP is not stable or there is a good reason to switch the BSP for OS boot.
The MP Services can be used to execute a C function on APs to execute MSR related instructions.
Mike
> -----Original Message-----
> From: Jayaprakash, N <n.jayaprakash@intel.com>
> Sent: Sunday, April 14, 2024 10:33 PM
> To: devel@edk2.groups.io; Jayaprakash, N <n.jayaprakash@intel.com>
> Cc: Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>
> Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex
> & wrmsr_ex functions to read/write cpu specific msrs
>
> + Rebecca and Mike,
>
> Would you be able to review this PR?
>
> Regards,
> JP
>
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> Jayaprakash, N
> Sent: Wednesday, April 10, 2024 11:49 AM
> To: devel@edk2.groups.io
> Cc: Jayaprakash, N <n.jayaprakash@intel.com>; Rebecca Cran
> <rebecca@bsdio.com>; Kinney, Michael D <michael.d.kinney@intel.com>
> Subject: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex &
> wrmsr_ex functions to read/write cpu specific msrs
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4746
>
> The rdmsr_ex and wrmsr_ex are extension APIs to the rdmsr and wrmsr
> APIs supported in edk2 module. These extension APIs makes it possible
> to read / write MSRs from specific processors and fills an existing
> gap in this area.
>
> Cc: Rebecca Cran <rebecca@bsdio.com>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Jayaprakash N <n.jayaprakash@intel.com>
> Signed-off-by: Jayaprakash N <n.jayaprakash@intel.com>
> ---
> .../PyMod-3.6.8/Modules/edk2module.c | 159
> +++++++++++++++++-
> .../Python/Python-3.6.8/Python368.inf | 3 +
> 2 files changed, 158 insertions(+), 4 deletions(-)
>
> diff --git a/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> 3.6.8/Modules/edk2module.c b/AppPkg/Applications/Python/Python-
> 3.6.8/PyMod-3.6.8/Modules/edk2module.c
> index d6af8da..f1b13a6 100644
> --- a/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> 3.6.8/Modules/edk2module.c
> +++ b/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> 3.6.8/Modules/edk2mo
> +++ dule.c
> @@ -3,7 +3,7 @@
> Derived from posixmodule.c in Python 2.7.2.
>
> Copyright (c) 2015, Daryl McDaniel. All rights reserved.<BR>
> - Copyright (c) 2011 - 2023, Intel Corporation. All rights
> reserved.<BR>
> + Copyright (c) 2011 - 2024, Intel Corporation. All rights
> + reserved.<BR>
> This program and the accompanying materials are licensed and made
> available under
> the terms and conditions of the BSD License that accompanies this
> distribution.
> The full text of the license may be found at @@ -22,16 +22,23 @@
> #include <wchar.h> #include <sys/syslimits.h> #include <Uefi.h>
> +#include <Pi/PiDxeCis.h> // Needed for the definition of
> EFI_AP_PROCEDURE
> #include <Library/UefiLib.h>
> #include <Library/PciLib.h>
> #include <Library/IoLib.h>
> #include <Library/UefiRuntimeServicesTableLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Protocol/MpService.h>
>
> #ifdef __cplusplus
> extern "C" {
> #endif
>
> PyTypeObject EfiGuidType;
> +EFI_MP_SERVICES_PROTOCOL *gpMpService = NULL;
> +UINTN gBSPProcessorNumber = 0;
> +UINTN gNumberOfProcessors = 0;
> +UINTN gNumberOfEnabledProcessors = 0;
>
> extern void _swsmi( unsigned int smi_code_data, unsigned int
> rax_value, unsigned int rbx_value, unsigned int rcx_value, unsigned
> int rdx_value, unsigned int rsi_value, unsigned int rdi_value ); // -
> - Support routines @@ -169,6 +176,35 @@ PyDoc_STRVAR(edk2__doc__,
> /* dummy version. _PyVerify_fd() is already defined in fileobject.h
> */ #define _PyVerify_fd_dup2(A, B) (1)
>
> +static EFI_STATUS
> +MpServicesWhoAmI (
> + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> + OUT UINTN *pProcessorNumber
> + )
> +{
> + return pMpService->WhoAmI (pMpService, pProcessorNumber); }
> +
> +static EFI_STATUS
> +MpServicesGetNumberOfProcessors (
> + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> + OUT UINTN *pNumberOfProcessors,
> + OUT UINTN *pNumberOfEnabledProcessors
> +
> + )
> +{
> + return pMpService->GetNumberOfProcessors (pMpService,
> +pNumberOfProcessors, pNumberOfEnabledProcessors); }
> +
> +static EFI_STATUS
> +MpServicesSwitchBSP (
> + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> + IN UINTN ProcessorNumber
> + )
> +{
> + return pMpService->SwitchBSP(pMpService, ProcessorNumber, TRUE); }
> +
> #ifndef UEFI_C_SOURCE
> /* Return a dictionary corresponding to the POSIX environment table
> */ extern char **environ; @@ -3865,6 +3901,56 @@ edk2_rdmsr(PyObject
> *self, PyObject *args)
> return Py_BuildValue("(II)", (unsigned long)veax, (unsigned
> long)vedx); }
>
> +PyDoc_STRVAR(efi_rdmsr_ex__doc__,
> +"rdmsr_ex(cpu, msr) -> (lower_32bits, higher_32bits)\n\ \n\ Read the
> +given msr by switching to cpu and return the data as tuple.\n\ \n\
> +Parameters:\n\
> + cpu - The cpu number in hex or int format\n\
> + msr - The msr in hex or int format\n\ \n\ Return Value:\n\
> + a tuple with lower and higher 32 bit values read from the msr\n\
> +");
> +
> +static PyObject *
> +edk2_rdmsr_ex(PyObject *self, PyObject *args) {
> + unsigned int cpu, vecx, veax, vedx;
> + unsigned int bsp_switched = 0;
> + EFI_STATUS status = 0;
> + UINT64 data = 0;
> +
> + if (!PyArg_ParseTuple(args, "II", &cpu, &vecx))
> + return NULL;
> +
> + Py_BEGIN_ALLOW_THREADS
> + if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors) {
> + //switch the BSP to the cpu
> + status = MpServicesSwitchBSP(gpMpService, cpu);
> + if (!EFI_ERROR(status))
> + {
> + bsp_switched = 1;
> + }
> + }
> +
> + data = AsmReadMsr64(vecx);
> +
> + if (bsp_switched)
> + {
> + // switch BSP to the saved BSP processor
> + MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
> + // update the saved BSP processor
> + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
> + }
> + Py_END_ALLOW_THREADS
> + veax = (UINT32)data;
> + vedx = (UINT64)data >> 32;
> + return Py_BuildValue("(II)", (unsigned long)veax, (unsigned
> +long)vedx); }
> +
> PyDoc_STRVAR(efi_wrmsr__doc__,
> "wrmsr(msr, lower_32bits, higher_32bits) -> None\n\ \n\ @@ -3889,6
> +3975,58 @@ edk2_wrmsr(PyObject *self, PyObject *args)
> data = vedx << 32 | veax;
> Py_BEGIN_ALLOW_THREADS
> AsmWriteMsr64(vecx, data);
> + Py_END_ALLOW_THREADS
> + Py_INCREF(Py_None);
> + return Py_None;
> +}
> +
> +PyDoc_STRVAR(efi_wrmsr_ex__doc__,
> +"wrmsr_ex(cpu, msr, lower_32bits, higher_32bits) -> None\n\ \n\
> Writes
> +higher_32bits:lower_32bits to the given msr.\n\ \n\ Parameters:\n\
> + cpu - The cpu number in hex or int format\n\
> + msr - The msr in hex or int format\n\
> + lower_32bits - The lower 32 bit data for the msr\n\
> + higher_32bits - The higher 32 bit data for the msr\n\ \n\ Return
> +Value:\n\
> + None\n\
> +");
> +
> +static PyObject *
> +edk2_wrmsr_ex(PyObject *self, PyObject *args) {
> + unsigned int cpu, msr, veax, vedx;
> + unsigned int bsp_switched = 0;
> + EFI_STATUS status = 0;
> + UINT64 data = 0;
> +
> + if (!PyArg_ParseTuple(args, "IIII", &cpu, &msr, &veax, &vedx))
> + return NULL;
> + data = (((UINT64)vedx) << 32) | veax;
> +
> + Py_BEGIN_ALLOW_THREADS
> + if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors) {
> + //switch the BSP to the cpu
> + status = MpServicesSwitchBSP(gpMpService, cpu);
> + if (!EFI_ERROR(status))
> + {
> + bsp_switched = 1;
> + }
> + }
> + // write to MSR
> + AsmWriteMsr64(msr, data);
> +
> + if (bsp_switched)
> + {
> + // switch BSP to the saved BSP processor
> + MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
> + // update the saved BSP processor
> + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber); }
> Py_END_ALLOW_THREADS
> Py_INCREF(Py_None);
> return Py_None;
> @@ -4576,7 +4714,9 @@ static PyMethodDef edk2_methods[] = { #endif
> {"abort", edk2_abort, METH_NOARGS,
> edk2_abort__doc__},
> {"rdmsr", edk2_rdmsr, METH_VARARGS,
> efi_rdmsr__doc__},
> + {"rdmsr_ex", edk2_rdmsr_ex, METH_VARARGS,
> efi_rdmsr_ex__doc__},
> {"wrmsr", edk2_wrmsr, METH_VARARGS,
> efi_wrmsr__doc__},
> + {"wrmsr_ex", edk2_wrmsr_ex, METH_VARARGS,
> efi_wrmsr_ex__doc__},
> {"readpci", edk2_readpci, METH_VARARGS,
> efi_readpci__doc__},
> {"writepci", edk2_writepci, METH_VARARGS,
> efi_writepci__doc__},
> {"readmem", posix_readmem,
> METH_VARARGS, efi_readmem__doc__},
> @@ -4813,13 +4953,24 @@ static struct PyModuleDef edk2module = {
> PyMODINIT_FUNC
> PyEdk2__Init(void)
> {
> - PyObject *m;
> + PyObject *m;
> + EFI_STATUS Status = 0;
>
> #ifndef UEFI_C_SOURCE
> PyObject *v;
> #endif
> + Status = gBS->LocateProtocol(&gEfiMpServiceProtocolGuid, NULL,
> &gpMpService);
> + if (EFI_ERROR(Status))
> + {
> + printf("Unable to locate the Protocol MpServices protocol:
> %r\n", Status);
> + return NULL;
> + }
> + // Get the current BSP processor number
> + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
> + // Get the number of processors
> + MpServicesGetNumberOfProcessors(gpMpService,
> &gNumberOfProcessors,
> + &gNumberOfEnabledProcessors);
>
> - m = PyModule_Create(&edk2module);
> + m = PyModule_Create(&edk2module);
> if (m == NULL)
> return m;
>
> @@ -4870,7 +5021,7 @@ PyEdk2__Init(void)
> //PyModule_AddObject(m, "statvfs_result",
> // (PyObject*) &StatVFSResultType);
> initialized = 1;
> - return m;
> + return m;
>
> }
>
> diff --git a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> index 8b7f677..eca98b5 100644
> --- a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> +++ b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> @@ -46,6 +46,9 @@
> #BsdSocketLib
> #EfiSocketLib
>
> +[Protocols]
> + gEfiMpServiceProtocolGuid ## CONSUMES
> +
> [FixedPcd]
> gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x0F
> gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000040
> --
> 2.40.0.windows.1
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#117942): https://edk2.groups.io/g/devel/message/117942
Mute This Topic: https://groups.io/mt/105530360/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs
2024-04-18 3:16 ` Jayaprakash, N
@ 2024-04-18 5:16 ` Michael D Kinney
2024-04-18 6:18 ` Jayaprakash, N
[not found] ` <17C74B724102AC1D.15491@groups.io>
0 siblings, 2 replies; 9+ messages in thread
From: Michael D Kinney @ 2024-04-18 5:16 UTC (permalink / raw)
To: Jayaprakash, N, devel@edk2.groups.io; +Cc: Rebecca Cran, Kinney, Michael D
Please use MP Services Protocol APIs StartupAllAPs() or StarupThisAP()
to read/write MSRs on other logical processors.
There and many examples of this in the UefiCpuPkg to programming MSRs
on all the logical processors.
Mike
> -----Original Message-----
> From: Jayaprakash, N <n.jayaprakash@intel.com>
> Sent: Wednesday, April 17, 2024 8:16 PM
> To: Kinney, Michael D <michael.d.kinney@intel.com>;
> devel@edk2.groups.io
> Cc: Rebecca Cran <rebecca@bsdio.com>
> Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex
> & wrmsr_ex functions to read/write cpu specific msrs
>
> In the validation and debug scenarios, engineers tend to read MSRs and
> write to MSRs of different CPUs.
> So we are providing a simple mechanism through these APIs to enable
> them to do these operations.
>
> These APIs will be part of the edk2 module of the Python interpreter
> and will be used during the validation and debug scenarios only.
>
> This is not for switching the BSP for OS boot. This is only used
> during the validation and debug use cases.
>
> Regards,
> JP
> -----Original Message-----
> From: Kinney, Michael D <michael.d.kinney@intel.com>
> Sent: Thursday, April 18, 2024 12:08 AM
> To: Jayaprakash, N <n.jayaprakash@intel.com>; devel@edk2.groups.io
> Cc: Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>
> Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex
> & wrmsr_ex functions to read/write cpu specific msrs
>
> Hi JP,
>
> Is there a reason switch BSP is being used. That is not a common
> operation and is typically used if the current BSP is not stable or
> there is a good reason to switch the BSP for OS boot.
>
> The MP Services can be used to execute a C function on APs to execute
> MSR related instructions.
>
> Mike
>
> > -----Original Message-----
> > From: Jayaprakash, N <n.jayaprakash@intel.com>
> > Sent: Sunday, April 14, 2024 10:33 PM
> > To: devel@edk2.groups.io; Jayaprakash, N <n.jayaprakash@intel.com>
> > Cc: Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D
> > <michael.d.kinney@intel.com>
> > Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add
> rdmsr_ex
> > & wrmsr_ex functions to read/write cpu specific msrs
> >
> > + Rebecca and Mike,
> >
> > Would you be able to review this PR?
> >
> > Regards,
> > JP
> >
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > Jayaprakash, N
> > Sent: Wednesday, April 10, 2024 11:49 AM
> > To: devel@edk2.groups.io
> > Cc: Jayaprakash, N <n.jayaprakash@intel.com>; Rebecca Cran
> > <rebecca@bsdio.com>; Kinney, Michael D <michael.d.kinney@intel.com>
> > Subject: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex &
> > wrmsr_ex functions to read/write cpu specific msrs
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4746
> >
> > The rdmsr_ex and wrmsr_ex are extension APIs to the rdmsr and wrmsr
> > APIs supported in edk2 module. These extension APIs makes it
> possible
> > to read / write MSRs from specific processors and fills an existing
> > gap in this area.
> >
> > Cc: Rebecca Cran <rebecca@bsdio.com>
> > Cc: Michael D Kinney <michael.d.kinney@intel.com>
> > Cc: Jayaprakash N <n.jayaprakash@intel.com>
> > Signed-off-by: Jayaprakash N <n.jayaprakash@intel.com>
> > ---
> > .../PyMod-3.6.8/Modules/edk2module.c | 159
> > +++++++++++++++++-
> > .../Python/Python-3.6.8/Python368.inf | 3 +
> > 2 files changed, 158 insertions(+), 4 deletions(-)
> >
> > diff --git a/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> > 3.6.8/Modules/edk2module.c b/AppPkg/Applications/Python/Python-
> > 3.6.8/PyMod-3.6.8/Modules/edk2module.c
> > index d6af8da..f1b13a6 100644
> > --- a/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> > 3.6.8/Modules/edk2module.c
> > +++ b/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> > 3.6.8/Modules/edk2mo
> > +++ dule.c
> > @@ -3,7 +3,7 @@
> > Derived from posixmodule.c in Python 2.7.2.
> >
> > Copyright (c) 2015, Daryl McDaniel. All rights reserved.<BR>
> > - Copyright (c) 2011 - 2023, Intel Corporation. All rights
> > reserved.<BR>
> > + Copyright (c) 2011 - 2024, Intel Corporation. All rights
> > + reserved.<BR>
> > This program and the accompanying materials are licensed and
> made
> > available under
> > the terms and conditions of the BSD License that accompanies
> this
> > distribution.
> > The full text of the license may be found at @@ -22,16 +22,23
> @@
> > #include <wchar.h> #include <sys/syslimits.h> #include <Uefi.h>
> > +#include <Pi/PiDxeCis.h> // Needed for the definition of
> > EFI_AP_PROCEDURE
> > #include <Library/UefiLib.h>
> > #include <Library/PciLib.h>
> > #include <Library/IoLib.h>
> > #include <Library/UefiRuntimeServicesTableLib.h>
> > +#include <Library/UefiBootServicesTableLib.h>
> > +#include <Protocol/MpService.h>
> >
> > #ifdef __cplusplus
> > extern "C" {
> > #endif
> >
> > PyTypeObject EfiGuidType;
> > +EFI_MP_SERVICES_PROTOCOL *gpMpService = NULL;
> > +UINTN gBSPProcessorNumber = 0;
> > +UINTN gNumberOfProcessors = 0;
> > +UINTN gNumberOfEnabledProcessors = 0;
> >
> > extern void _swsmi( unsigned int smi_code_data, unsigned int
> > rax_value, unsigned int rbx_value, unsigned int rcx_value, unsigned
> > int rdx_value, unsigned int rsi_value, unsigned int rdi_value ); //
> -
> > - Support routines @@ -169,6 +176,35 @@ PyDoc_STRVAR(edk2__doc__,
> > /* dummy version. _PyVerify_fd() is already defined in fileobject.h
> > */ #define _PyVerify_fd_dup2(A, B) (1)
> >
> > +static EFI_STATUS
> > +MpServicesWhoAmI (
> > + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> > + OUT UINTN *pProcessorNumber
> > + )
> > +{
> > + return pMpService->WhoAmI (pMpService, pProcessorNumber); }
> > +
> > +static EFI_STATUS
> > +MpServicesGetNumberOfProcessors (
> > + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> > + OUT UINTN *pNumberOfProcessors,
> > + OUT UINTN *pNumberOfEnabledProcessors
> > +
> > + )
> > +{
> > + return pMpService->GetNumberOfProcessors (pMpService,
> > +pNumberOfProcessors, pNumberOfEnabledProcessors); }
> > +
> > +static EFI_STATUS
> > +MpServicesSwitchBSP (
> > + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> > + IN UINTN ProcessorNumber
> > + )
> > +{
> > + return pMpService->SwitchBSP(pMpService, ProcessorNumber, TRUE);
> }
> > +
> > #ifndef UEFI_C_SOURCE
> > /* Return a dictionary corresponding to the POSIX environment table
> > */ extern char **environ; @@ -3865,6 +3901,56 @@
> edk2_rdmsr(PyObject
> > *self, PyObject *args)
> > return Py_BuildValue("(II)", (unsigned long)veax, (unsigned
> > long)vedx); }
> >
> > +PyDoc_STRVAR(efi_rdmsr_ex__doc__,
> > +"rdmsr_ex(cpu, msr) -> (lower_32bits, higher_32bits)\n\ \n\ Read
> the
> > +given msr by switching to cpu and return the data as tuple.\n\ \n\
> > +Parameters:\n\
> > + cpu - The cpu number in hex or int format\n\
> > + msr - The msr in hex or int format\n\ \n\ Return Value:\n\
> > + a tuple with lower and higher 32 bit values read from the
> msr\n\
> > +");
> > +
> > +static PyObject *
> > +edk2_rdmsr_ex(PyObject *self, PyObject *args) {
> > + unsigned int cpu, vecx, veax, vedx;
> > + unsigned int bsp_switched = 0;
> > + EFI_STATUS status = 0;
> > + UINT64 data = 0;
> > +
> > + if (!PyArg_ParseTuple(args, "II", &cpu, &vecx))
> > + return NULL;
> > +
> > + Py_BEGIN_ALLOW_THREADS
> > + if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors) {
> > + //switch the BSP to the cpu
> > + status = MpServicesSwitchBSP(gpMpService, cpu);
> > + if (!EFI_ERROR(status))
> > + {
> > + bsp_switched = 1;
> > + }
> > + }
> > +
> > + data = AsmReadMsr64(vecx);
> > +
> > + if (bsp_switched)
> > + {
> > + // switch BSP to the saved BSP processor
> > + MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
> > + // update the saved BSP processor
> > + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
> > + }
> > + Py_END_ALLOW_THREADS
> > + veax = (UINT32)data;
> > + vedx = (UINT64)data >> 32;
> > + return Py_BuildValue("(II)", (unsigned long)veax, (unsigned
> > +long)vedx); }
> > +
> > PyDoc_STRVAR(efi_wrmsr__doc__,
> > "wrmsr(msr, lower_32bits, higher_32bits) -> None\n\ \n\ @@ -3889,6
> > +3975,58 @@ edk2_wrmsr(PyObject *self, PyObject *args)
> > data = vedx << 32 | veax;
> > Py_BEGIN_ALLOW_THREADS
> > AsmWriteMsr64(vecx, data);
> > + Py_END_ALLOW_THREADS
> > + Py_INCREF(Py_None);
> > + return Py_None;
> > +}
> > +
> > +PyDoc_STRVAR(efi_wrmsr_ex__doc__,
> > +"wrmsr_ex(cpu, msr, lower_32bits, higher_32bits) -> None\n\ \n\
> > Writes
> > +higher_32bits:lower_32bits to the given msr.\n\ \n\ Parameters:\n\
> > + cpu - The cpu number in hex or int format\n\
> > + msr - The msr in hex or int format\n\
> > + lower_32bits - The lower 32 bit data for the msr\n\
> > + higher_32bits - The higher 32 bit data for the msr\n\ \n\
> Return
> > +Value:\n\
> > + None\n\
> > +");
> > +
> > +static PyObject *
> > +edk2_wrmsr_ex(PyObject *self, PyObject *args) {
> > + unsigned int cpu, msr, veax, vedx;
> > + unsigned int bsp_switched = 0;
> > + EFI_STATUS status = 0;
> > + UINT64 data = 0;
> > +
> > + if (!PyArg_ParseTuple(args, "IIII", &cpu, &msr, &veax, &vedx))
> > + return NULL;
> > + data = (((UINT64)vedx) << 32) | veax;
> > +
> > + Py_BEGIN_ALLOW_THREADS
> > + if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors) {
> > + //switch the BSP to the cpu
> > + status = MpServicesSwitchBSP(gpMpService, cpu);
> > + if (!EFI_ERROR(status))
> > + {
> > + bsp_switched = 1;
> > + }
> > + }
> > + // write to MSR
> > + AsmWriteMsr64(msr, data);
> > +
> > + if (bsp_switched)
> > + {
> > + // switch BSP to the saved BSP processor
> > + MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
> > + // update the saved BSP processor
> > + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber); }
> > Py_END_ALLOW_THREADS
> > Py_INCREF(Py_None);
> > return Py_None;
> > @@ -4576,7 +4714,9 @@ static PyMethodDef edk2_methods[] = { #endif
> > {"abort", edk2_abort, METH_NOARGS,
> > edk2_abort__doc__},
> > {"rdmsr", edk2_rdmsr,
> METH_VARARGS,
> > efi_rdmsr__doc__},
> > + {"rdmsr_ex", edk2_rdmsr_ex,
> METH_VARARGS,
> > efi_rdmsr_ex__doc__},
> > {"wrmsr", edk2_wrmsr,
> METH_VARARGS,
> > efi_wrmsr__doc__},
> > + {"wrmsr_ex", edk2_wrmsr_ex,
> METH_VARARGS,
> > efi_wrmsr_ex__doc__},
> > {"readpci", edk2_readpci,
> METH_VARARGS,
> > efi_readpci__doc__},
> > {"writepci", edk2_writepci,
> METH_VARARGS,
> > efi_writepci__doc__},
> > {"readmem", posix_readmem,
> > METH_VARARGS, efi_readmem__doc__},
> > @@ -4813,13 +4953,24 @@ static struct PyModuleDef edk2module = {
> > PyMODINIT_FUNC
> > PyEdk2__Init(void)
> > {
> > - PyObject *m;
> > + PyObject *m;
> > + EFI_STATUS Status = 0;
> >
> > #ifndef UEFI_C_SOURCE
> > PyObject *v;
> > #endif
> > + Status = gBS->LocateProtocol(&gEfiMpServiceProtocolGuid, NULL,
> > &gpMpService);
> > + if (EFI_ERROR(Status))
> > + {
> > + printf("Unable to locate the Protocol MpServices protocol:
> > %r\n", Status);
> > + return NULL;
> > + }
> > + // Get the current BSP processor number
> > + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
> > + // Get the number of processors
> > + MpServicesGetNumberOfProcessors(gpMpService,
> > &gNumberOfProcessors,
> > + &gNumberOfEnabledProcessors);
> >
> > - m = PyModule_Create(&edk2module);
> > + m = PyModule_Create(&edk2module);
> > if (m == NULL)
> > return m;
> >
> > @@ -4870,7 +5021,7 @@ PyEdk2__Init(void)
> > //PyModule_AddObject(m, "statvfs_result",
> > // (PyObject*) &StatVFSResultType);
> > initialized = 1;
> > - return m;
> > + return m;
> >
> > }
> >
> > diff --git a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > index 8b7f677..eca98b5 100644
> > --- a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > +++ b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > @@ -46,6 +46,9 @@
> > #BsdSocketLib
> > #EfiSocketLib
> >
> > +[Protocols]
> > + gEfiMpServiceProtocolGuid ## CONSUMES
> > +
> > [FixedPcd]
> > gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x0F
> > gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000040
> > --
> > 2.40.0.windows.1
> >
> >
> >
> >
> >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#117943): https://edk2.groups.io/g/devel/message/117943
Mute This Topic: https://groups.io/mt/105530360/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs
2024-04-18 5:16 ` Michael D Kinney
@ 2024-04-18 6:18 ` Jayaprakash, N
[not found] ` <17C74B724102AC1D.15491@groups.io>
1 sibling, 0 replies; 9+ messages in thread
From: Jayaprakash, N @ 2024-04-18 6:18 UTC (permalink / raw)
To: Kinney, Michael D, devel@edk2.groups.io; +Cc: Rebecca Cran
Thanks Mike. I shall make necessary changes and submit the PR again for review.
Regards,
JP
-----Original Message-----
From: Kinney, Michael D <michael.d.kinney@intel.com>
Sent: Thursday, April 18, 2024 10:46 AM
To: Jayaprakash, N <n.jayaprakash@intel.com>; devel@edk2.groups.io
Cc: Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D <michael.d.kinney@intel.com>
Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs
Please use MP Services Protocol APIs StartupAllAPs() or StarupThisAP() to read/write MSRs on other logical processors.
There and many examples of this in the UefiCpuPkg to programming MSRs on all the logical processors.
Mike
> -----Original Message-----
> From: Jayaprakash, N <n.jayaprakash@intel.com>
> Sent: Wednesday, April 17, 2024 8:16 PM
> To: Kinney, Michael D <michael.d.kinney@intel.com>;
> devel@edk2.groups.io
> Cc: Rebecca Cran <rebecca@bsdio.com>
> Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex
> & wrmsr_ex functions to read/write cpu specific msrs
>
> In the validation and debug scenarios, engineers tend to read MSRs and
> write to MSRs of different CPUs.
> So we are providing a simple mechanism through these APIs to enable
> them to do these operations.
>
> These APIs will be part of the edk2 module of the Python interpreter
> and will be used during the validation and debug scenarios only.
>
> This is not for switching the BSP for OS boot. This is only used
> during the validation and debug use cases.
>
> Regards,
> JP
> -----Original Message-----
> From: Kinney, Michael D <michael.d.kinney@intel.com>
> Sent: Thursday, April 18, 2024 12:08 AM
> To: Jayaprakash, N <n.jayaprakash@intel.com>; devel@edk2.groups.io
> Cc: Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>
> Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex
> & wrmsr_ex functions to read/write cpu specific msrs
>
> Hi JP,
>
> Is there a reason switch BSP is being used. That is not a common
> operation and is typically used if the current BSP is not stable or
> there is a good reason to switch the BSP for OS boot.
>
> The MP Services can be used to execute a C function on APs to execute
> MSR related instructions.
>
> Mike
>
> > -----Original Message-----
> > From: Jayaprakash, N <n.jayaprakash@intel.com>
> > Sent: Sunday, April 14, 2024 10:33 PM
> > To: devel@edk2.groups.io; Jayaprakash, N <n.jayaprakash@intel.com>
> > Cc: Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D
> > <michael.d.kinney@intel.com>
> > Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add
> rdmsr_ex
> > & wrmsr_ex functions to read/write cpu specific msrs
> >
> > + Rebecca and Mike,
> >
> > Would you be able to review this PR?
> >
> > Regards,
> > JP
> >
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > Jayaprakash, N
> > Sent: Wednesday, April 10, 2024 11:49 AM
> > To: devel@edk2.groups.io
> > Cc: Jayaprakash, N <n.jayaprakash@intel.com>; Rebecca Cran
> > <rebecca@bsdio.com>; Kinney, Michael D <michael.d.kinney@intel.com>
> > Subject: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex &
> > wrmsr_ex functions to read/write cpu specific msrs
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4746
> >
> > The rdmsr_ex and wrmsr_ex are extension APIs to the rdmsr and wrmsr
> > APIs supported in edk2 module. These extension APIs makes it
> possible
> > to read / write MSRs from specific processors and fills an existing
> > gap in this area.
> >
> > Cc: Rebecca Cran <rebecca@bsdio.com>
> > Cc: Michael D Kinney <michael.d.kinney@intel.com>
> > Cc: Jayaprakash N <n.jayaprakash@intel.com>
> > Signed-off-by: Jayaprakash N <n.jayaprakash@intel.com>
> > ---
> > .../PyMod-3.6.8/Modules/edk2module.c | 159
> > +++++++++++++++++-
> > .../Python/Python-3.6.8/Python368.inf | 3 +
> > 2 files changed, 158 insertions(+), 4 deletions(-)
> >
> > diff --git a/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> > 3.6.8/Modules/edk2module.c b/AppPkg/Applications/Python/Python-
> > 3.6.8/PyMod-3.6.8/Modules/edk2module.c
> > index d6af8da..f1b13a6 100644
> > --- a/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> > 3.6.8/Modules/edk2module.c
> > +++ b/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> > 3.6.8/Modules/edk2mo
> > +++ dule.c
> > @@ -3,7 +3,7 @@
> > Derived from posixmodule.c in Python 2.7.2.
> >
> > Copyright (c) 2015, Daryl McDaniel. All rights reserved.<BR>
> > - Copyright (c) 2011 - 2023, Intel Corporation. All rights
> > reserved.<BR>
> > + Copyright (c) 2011 - 2024, Intel Corporation. All rights
> > + reserved.<BR>
> > This program and the accompanying materials are licensed and
> made
> > available under
> > the terms and conditions of the BSD License that accompanies
> this
> > distribution.
> > The full text of the license may be found at @@ -22,16 +22,23
> @@
> > #include <wchar.h> #include <sys/syslimits.h> #include <Uefi.h>
> > +#include <Pi/PiDxeCis.h> // Needed for the definition of
> > EFI_AP_PROCEDURE
> > #include <Library/UefiLib.h>
> > #include <Library/PciLib.h>
> > #include <Library/IoLib.h>
> > #include <Library/UefiRuntimeServicesTableLib.h>
> > +#include <Library/UefiBootServicesTableLib.h>
> > +#include <Protocol/MpService.h>
> >
> > #ifdef __cplusplus
> > extern "C" {
> > #endif
> >
> > PyTypeObject EfiGuidType;
> > +EFI_MP_SERVICES_PROTOCOL *gpMpService = NULL;
> > +UINTN gBSPProcessorNumber = 0;
> > +UINTN gNumberOfProcessors = 0;
> > +UINTN gNumberOfEnabledProcessors = 0;
> >
> > extern void _swsmi( unsigned int smi_code_data, unsigned int
> > rax_value, unsigned int rbx_value, unsigned int rcx_value, unsigned
> > int rdx_value, unsigned int rsi_value, unsigned int rdi_value ); //
> -
> > - Support routines @@ -169,6 +176,35 @@ PyDoc_STRVAR(edk2__doc__,
> > /* dummy version. _PyVerify_fd() is already defined in fileobject.h
> > */ #define _PyVerify_fd_dup2(A, B) (1)
> >
> > +static EFI_STATUS
> > +MpServicesWhoAmI (
> > + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> > + OUT UINTN *pProcessorNumber
> > + )
> > +{
> > + return pMpService->WhoAmI (pMpService, pProcessorNumber); }
> > +
> > +static EFI_STATUS
> > +MpServicesGetNumberOfProcessors (
> > + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> > + OUT UINTN *pNumberOfProcessors,
> > + OUT UINTN *pNumberOfEnabledProcessors
> > +
> > + )
> > +{
> > + return pMpService->GetNumberOfProcessors (pMpService,
> > +pNumberOfProcessors, pNumberOfEnabledProcessors); }
> > +
> > +static EFI_STATUS
> > +MpServicesSwitchBSP (
> > + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> > + IN UINTN ProcessorNumber
> > + )
> > +{
> > + return pMpService->SwitchBSP(pMpService, ProcessorNumber, TRUE);
> }
> > +
> > #ifndef UEFI_C_SOURCE
> > /* Return a dictionary corresponding to the POSIX environment table
> > */ extern char **environ; @@ -3865,6 +3901,56 @@
> edk2_rdmsr(PyObject
> > *self, PyObject *args)
> > return Py_BuildValue("(II)", (unsigned long)veax, (unsigned
> > long)vedx); }
> >
> > +PyDoc_STRVAR(efi_rdmsr_ex__doc__,
> > +"rdmsr_ex(cpu, msr) -> (lower_32bits, higher_32bits)\n\ \n\ Read
> the
> > +given msr by switching to cpu and return the data as tuple.\n\ \n\
> > +Parameters:\n\
> > + cpu - The cpu number in hex or int format\n\
> > + msr - The msr in hex or int format\n\ \n\ Return Value:\n\
> > + a tuple with lower and higher 32 bit values read from the
> msr\n\
> > +");
> > +
> > +static PyObject *
> > +edk2_rdmsr_ex(PyObject *self, PyObject *args) {
> > + unsigned int cpu, vecx, veax, vedx;
> > + unsigned int bsp_switched = 0;
> > + EFI_STATUS status = 0;
> > + UINT64 data = 0;
> > +
> > + if (!PyArg_ParseTuple(args, "II", &cpu, &vecx))
> > + return NULL;
> > +
> > + Py_BEGIN_ALLOW_THREADS
> > + if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors) {
> > + //switch the BSP to the cpu
> > + status = MpServicesSwitchBSP(gpMpService, cpu);
> > + if (!EFI_ERROR(status))
> > + {
> > + bsp_switched = 1;
> > + }
> > + }
> > +
> > + data = AsmReadMsr64(vecx);
> > +
> > + if (bsp_switched)
> > + {
> > + // switch BSP to the saved BSP processor
> > + MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
> > + // update the saved BSP processor
> > + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
> > + }
> > + Py_END_ALLOW_THREADS
> > + veax = (UINT32)data;
> > + vedx = (UINT64)data >> 32;
> > + return Py_BuildValue("(II)", (unsigned long)veax, (unsigned
> > +long)vedx); }
> > +
> > PyDoc_STRVAR(efi_wrmsr__doc__,
> > "wrmsr(msr, lower_32bits, higher_32bits) -> None\n\ \n\ @@ -3889,6
> > +3975,58 @@ edk2_wrmsr(PyObject *self, PyObject *args)
> > data = vedx << 32 | veax;
> > Py_BEGIN_ALLOW_THREADS
> > AsmWriteMsr64(vecx, data);
> > + Py_END_ALLOW_THREADS
> > + Py_INCREF(Py_None);
> > + return Py_None;
> > +}
> > +
> > +PyDoc_STRVAR(efi_wrmsr_ex__doc__,
> > +"wrmsr_ex(cpu, msr, lower_32bits, higher_32bits) -> None\n\ \n\
> > Writes
> > +higher_32bits:lower_32bits to the given msr.\n\ \n\ Parameters:\n\
> > + cpu - The cpu number in hex or int format\n\
> > + msr - The msr in hex or int format\n\
> > + lower_32bits - The lower 32 bit data for the msr\n\
> > + higher_32bits - The higher 32 bit data for the msr\n\ \n\
> Return
> > +Value:\n\
> > + None\n\
> > +");
> > +
> > +static PyObject *
> > +edk2_wrmsr_ex(PyObject *self, PyObject *args) {
> > + unsigned int cpu, msr, veax, vedx;
> > + unsigned int bsp_switched = 0;
> > + EFI_STATUS status = 0;
> > + UINT64 data = 0;
> > +
> > + if (!PyArg_ParseTuple(args, "IIII", &cpu, &msr, &veax, &vedx))
> > + return NULL;
> > + data = (((UINT64)vedx) << 32) | veax;
> > +
> > + Py_BEGIN_ALLOW_THREADS
> > + if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors) {
> > + //switch the BSP to the cpu
> > + status = MpServicesSwitchBSP(gpMpService, cpu);
> > + if (!EFI_ERROR(status))
> > + {
> > + bsp_switched = 1;
> > + }
> > + }
> > + // write to MSR
> > + AsmWriteMsr64(msr, data);
> > +
> > + if (bsp_switched)
> > + {
> > + // switch BSP to the saved BSP processor
> > + MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
> > + // update the saved BSP processor
> > + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber); }
> > Py_END_ALLOW_THREADS
> > Py_INCREF(Py_None);
> > return Py_None;
> > @@ -4576,7 +4714,9 @@ static PyMethodDef edk2_methods[] = { #endif
> > {"abort", edk2_abort, METH_NOARGS,
> > edk2_abort__doc__},
> > {"rdmsr", edk2_rdmsr,
> METH_VARARGS,
> > efi_rdmsr__doc__},
> > + {"rdmsr_ex", edk2_rdmsr_ex,
> METH_VARARGS,
> > efi_rdmsr_ex__doc__},
> > {"wrmsr", edk2_wrmsr,
> METH_VARARGS,
> > efi_wrmsr__doc__},
> > + {"wrmsr_ex", edk2_wrmsr_ex,
> METH_VARARGS,
> > efi_wrmsr_ex__doc__},
> > {"readpci", edk2_readpci,
> METH_VARARGS,
> > efi_readpci__doc__},
> > {"writepci", edk2_writepci,
> METH_VARARGS,
> > efi_writepci__doc__},
> > {"readmem", posix_readmem,
> > METH_VARARGS, efi_readmem__doc__},
> > @@ -4813,13 +4953,24 @@ static struct PyModuleDef edk2module = {
> > PyMODINIT_FUNC
> > PyEdk2__Init(void)
> > {
> > - PyObject *m;
> > + PyObject *m;
> > + EFI_STATUS Status = 0;
> >
> > #ifndef UEFI_C_SOURCE
> > PyObject *v;
> > #endif
> > + Status = gBS->LocateProtocol(&gEfiMpServiceProtocolGuid, NULL,
> > &gpMpService);
> > + if (EFI_ERROR(Status))
> > + {
> > + printf("Unable to locate the Protocol MpServices protocol:
> > %r\n", Status);
> > + return NULL;
> > + }
> > + // Get the current BSP processor number
> > + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
> > + // Get the number of processors
> > + MpServicesGetNumberOfProcessors(gpMpService,
> > &gNumberOfProcessors,
> > + &gNumberOfEnabledProcessors);
> >
> > - m = PyModule_Create(&edk2module);
> > + m = PyModule_Create(&edk2module);
> > if (m == NULL)
> > return m;
> >
> > @@ -4870,7 +5021,7 @@ PyEdk2__Init(void)
> > //PyModule_AddObject(m, "statvfs_result",
> > // (PyObject*) &StatVFSResultType);
> > initialized = 1;
> > - return m;
> > + return m;
> >
> > }
> >
> > diff --git a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > index 8b7f677..eca98b5 100644
> > --- a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > +++ b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > @@ -46,6 +46,9 @@
> > #BsdSocketLib
> > #EfiSocketLib
> >
> > +[Protocols]
> > + gEfiMpServiceProtocolGuid ## CONSUMES
> > +
> > [FixedPcd]
> > gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x0F
> > gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000040
> > --
> > 2.40.0.windows.1
> >
> >
> >
> >
> >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#117944): https://edk2.groups.io/g/devel/message/117944
Mute This Topic: https://groups.io/mt/105530360/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs
[not found] ` <17C74B724102AC1D.15491@groups.io>
@ 2024-04-24 18:13 ` Jayaprakash, N
2024-05-02 17:13 ` Michael D Kinney
0 siblings, 1 reply; 9+ messages in thread
From: Jayaprakash, N @ 2024-04-24 18:13 UTC (permalink / raw)
To: devel@edk2.groups.io, Jayaprakash, N, Kinney, Michael D; +Cc: Rebecca Cran
Hi Mike,
I have sent an updated patch v2 for review which uses the MP Services protocol API StarupThisAP() to read / write MSRs specific to CPU cores.
Please review and do the needful.
Regards,
JP
-----Original Message-----
From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Jayaprakash, N
Sent: Thursday, April 18, 2024 11:49 AM
To: Kinney, Michael D <michael.d.kinney@intel.com>; devel@edk2.groups.io
Cc: Rebecca Cran <rebecca@bsdio.com>
Subject: Re: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs
Thanks Mike. I shall make necessary changes and submit the PR again for review.
Regards,
JP
-----Original Message-----
From: Kinney, Michael D <michael.d.kinney@intel.com>
Sent: Thursday, April 18, 2024 10:46 AM
To: Jayaprakash, N <n.jayaprakash@intel.com>; devel@edk2.groups.io
Cc: Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D <michael.d.kinney@intel.com>
Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs
Please use MP Services Protocol APIs StartupAllAPs() or StarupThisAP() to read/write MSRs on other logical processors.
There and many examples of this in the UefiCpuPkg to programming MSRs on all the logical processors.
Mike
> -----Original Message-----
> From: Jayaprakash, N <n.jayaprakash@intel.com>
> Sent: Wednesday, April 17, 2024 8:16 PM
> To: Kinney, Michael D <michael.d.kinney@intel.com>;
> devel@edk2.groups.io
> Cc: Rebecca Cran <rebecca@bsdio.com>
> Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex
> & wrmsr_ex functions to read/write cpu specific msrs
>
> In the validation and debug scenarios, engineers tend to read MSRs and
> write to MSRs of different CPUs.
> So we are providing a simple mechanism through these APIs to enable
> them to do these operations.
>
> These APIs will be part of the edk2 module of the Python interpreter
> and will be used during the validation and debug scenarios only.
>
> This is not for switching the BSP for OS boot. This is only used
> during the validation and debug use cases.
>
> Regards,
> JP
> -----Original Message-----
> From: Kinney, Michael D <michael.d.kinney@intel.com>
> Sent: Thursday, April 18, 2024 12:08 AM
> To: Jayaprakash, N <n.jayaprakash@intel.com>; devel@edk2.groups.io
> Cc: Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>
> Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex
> & wrmsr_ex functions to read/write cpu specific msrs
>
> Hi JP,
>
> Is there a reason switch BSP is being used. That is not a common
> operation and is typically used if the current BSP is not stable or
> there is a good reason to switch the BSP for OS boot.
>
> The MP Services can be used to execute a C function on APs to execute
> MSR related instructions.
>
> Mike
>
> > -----Original Message-----
> > From: Jayaprakash, N <n.jayaprakash@intel.com>
> > Sent: Sunday, April 14, 2024 10:33 PM
> > To: devel@edk2.groups.io; Jayaprakash, N <n.jayaprakash@intel.com>
> > Cc: Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D
> > <michael.d.kinney@intel.com>
> > Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add
> rdmsr_ex
> > & wrmsr_ex functions to read/write cpu specific msrs
> >
> > + Rebecca and Mike,
> >
> > Would you be able to review this PR?
> >
> > Regards,
> > JP
> >
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > Jayaprakash, N
> > Sent: Wednesday, April 10, 2024 11:49 AM
> > To: devel@edk2.groups.io
> > Cc: Jayaprakash, N <n.jayaprakash@intel.com>; Rebecca Cran
> > <rebecca@bsdio.com>; Kinney, Michael D <michael.d.kinney@intel.com>
> > Subject: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex &
> > wrmsr_ex functions to read/write cpu specific msrs
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4746
> >
> > The rdmsr_ex and wrmsr_ex are extension APIs to the rdmsr and wrmsr
> > APIs supported in edk2 module. These extension APIs makes it
> possible
> > to read / write MSRs from specific processors and fills an existing
> > gap in this area.
> >
> > Cc: Rebecca Cran <rebecca@bsdio.com>
> > Cc: Michael D Kinney <michael.d.kinney@intel.com>
> > Cc: Jayaprakash N <n.jayaprakash@intel.com>
> > Signed-off-by: Jayaprakash N <n.jayaprakash@intel.com>
> > ---
> > .../PyMod-3.6.8/Modules/edk2module.c | 159
> > +++++++++++++++++-
> > .../Python/Python-3.6.8/Python368.inf | 3 +
> > 2 files changed, 158 insertions(+), 4 deletions(-)
> >
> > diff --git a/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> > 3.6.8/Modules/edk2module.c b/AppPkg/Applications/Python/Python-
> > 3.6.8/PyMod-3.6.8/Modules/edk2module.c
> > index d6af8da..f1b13a6 100644
> > --- a/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> > 3.6.8/Modules/edk2module.c
> > +++ b/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> > 3.6.8/Modules/edk2mo
> > +++ dule.c
> > @@ -3,7 +3,7 @@
> > Derived from posixmodule.c in Python 2.7.2.
> >
> > Copyright (c) 2015, Daryl McDaniel. All rights reserved.<BR>
> > - Copyright (c) 2011 - 2023, Intel Corporation. All rights
> > reserved.<BR>
> > + Copyright (c) 2011 - 2024, Intel Corporation. All rights
> > + reserved.<BR>
> > This program and the accompanying materials are licensed and
> made
> > available under
> > the terms and conditions of the BSD License that accompanies
> this
> > distribution.
> > The full text of the license may be found at @@ -22,16 +22,23
> @@
> > #include <wchar.h> #include <sys/syslimits.h> #include <Uefi.h>
> > +#include <Pi/PiDxeCis.h> // Needed for the definition of
> > EFI_AP_PROCEDURE
> > #include <Library/UefiLib.h>
> > #include <Library/PciLib.h>
> > #include <Library/IoLib.h>
> > #include <Library/UefiRuntimeServicesTableLib.h>
> > +#include <Library/UefiBootServicesTableLib.h>
> > +#include <Protocol/MpService.h>
> >
> > #ifdef __cplusplus
> > extern "C" {
> > #endif
> >
> > PyTypeObject EfiGuidType;
> > +EFI_MP_SERVICES_PROTOCOL *gpMpService = NULL;
> > +UINTN gBSPProcessorNumber = 0;
> > +UINTN gNumberOfProcessors = 0;
> > +UINTN gNumberOfEnabledProcessors = 0;
> >
> > extern void _swsmi( unsigned int smi_code_data, unsigned int
> > rax_value, unsigned int rbx_value, unsigned int rcx_value, unsigned
> > int rdx_value, unsigned int rsi_value, unsigned int rdi_value ); //
> -
> > - Support routines @@ -169,6 +176,35 @@ PyDoc_STRVAR(edk2__doc__,
> > /* dummy version. _PyVerify_fd() is already defined in fileobject.h
> > */ #define _PyVerify_fd_dup2(A, B) (1)
> >
> > +static EFI_STATUS
> > +MpServicesWhoAmI (
> > + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> > + OUT UINTN *pProcessorNumber
> > + )
> > +{
> > + return pMpService->WhoAmI (pMpService, pProcessorNumber); }
> > +
> > +static EFI_STATUS
> > +MpServicesGetNumberOfProcessors (
> > + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> > + OUT UINTN *pNumberOfProcessors,
> > + OUT UINTN *pNumberOfEnabledProcessors
> > +
> > + )
> > +{
> > + return pMpService->GetNumberOfProcessors (pMpService,
> > +pNumberOfProcessors, pNumberOfEnabledProcessors); }
> > +
> > +static EFI_STATUS
> > +MpServicesSwitchBSP (
> > + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> > + IN UINTN ProcessorNumber
> > + )
> > +{
> > + return pMpService->SwitchBSP(pMpService, ProcessorNumber, TRUE);
> }
> > +
> > #ifndef UEFI_C_SOURCE
> > /* Return a dictionary corresponding to the POSIX environment table
> > */ extern char **environ; @@ -3865,6 +3901,56 @@
> edk2_rdmsr(PyObject
> > *self, PyObject *args)
> > return Py_BuildValue("(II)", (unsigned long)veax, (unsigned
> > long)vedx); }
> >
> > +PyDoc_STRVAR(efi_rdmsr_ex__doc__,
> > +"rdmsr_ex(cpu, msr) -> (lower_32bits, higher_32bits)\n\ \n\ Read
> the
> > +given msr by switching to cpu and return the data as tuple.\n\ \n\
> > +Parameters:\n\
> > + cpu - The cpu number in hex or int format\n\
> > + msr - The msr in hex or int format\n\ \n\ Return Value:\n\
> > + a tuple with lower and higher 32 bit values read from the
> msr\n\
> > +");
> > +
> > +static PyObject *
> > +edk2_rdmsr_ex(PyObject *self, PyObject *args) {
> > + unsigned int cpu, vecx, veax, vedx;
> > + unsigned int bsp_switched = 0;
> > + EFI_STATUS status = 0;
> > + UINT64 data = 0;
> > +
> > + if (!PyArg_ParseTuple(args, "II", &cpu, &vecx))
> > + return NULL;
> > +
> > + Py_BEGIN_ALLOW_THREADS
> > + if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors) {
> > + //switch the BSP to the cpu
> > + status = MpServicesSwitchBSP(gpMpService, cpu);
> > + if (!EFI_ERROR(status))
> > + {
> > + bsp_switched = 1;
> > + }
> > + }
> > +
> > + data = AsmReadMsr64(vecx);
> > +
> > + if (bsp_switched)
> > + {
> > + // switch BSP to the saved BSP processor
> > + MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
> > + // update the saved BSP processor
> > + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
> > + }
> > + Py_END_ALLOW_THREADS
> > + veax = (UINT32)data;
> > + vedx = (UINT64)data >> 32;
> > + return Py_BuildValue("(II)", (unsigned long)veax, (unsigned
> > +long)vedx); }
> > +
> > PyDoc_STRVAR(efi_wrmsr__doc__,
> > "wrmsr(msr, lower_32bits, higher_32bits) -> None\n\ \n\ @@ -3889,6
> > +3975,58 @@ edk2_wrmsr(PyObject *self, PyObject *args)
> > data = vedx << 32 | veax;
> > Py_BEGIN_ALLOW_THREADS
> > AsmWriteMsr64(vecx, data);
> > + Py_END_ALLOW_THREADS
> > + Py_INCREF(Py_None);
> > + return Py_None;
> > +}
> > +
> > +PyDoc_STRVAR(efi_wrmsr_ex__doc__,
> > +"wrmsr_ex(cpu, msr, lower_32bits, higher_32bits) -> None\n\ \n\
> > Writes
> > +higher_32bits:lower_32bits to the given msr.\n\ \n\ Parameters:\n\
> > + cpu - The cpu number in hex or int format\n\
> > + msr - The msr in hex or int format\n\
> > + lower_32bits - The lower 32 bit data for the msr\n\
> > + higher_32bits - The higher 32 bit data for the msr\n\ \n\
> Return
> > +Value:\n\
> > + None\n\
> > +");
> > +
> > +static PyObject *
> > +edk2_wrmsr_ex(PyObject *self, PyObject *args) {
> > + unsigned int cpu, msr, veax, vedx;
> > + unsigned int bsp_switched = 0;
> > + EFI_STATUS status = 0;
> > + UINT64 data = 0;
> > +
> > + if (!PyArg_ParseTuple(args, "IIII", &cpu, &msr, &veax, &vedx))
> > + return NULL;
> > + data = (((UINT64)vedx) << 32) | veax;
> > +
> > + Py_BEGIN_ALLOW_THREADS
> > + if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors) {
> > + //switch the BSP to the cpu
> > + status = MpServicesSwitchBSP(gpMpService, cpu);
> > + if (!EFI_ERROR(status))
> > + {
> > + bsp_switched = 1;
> > + }
> > + }
> > + // write to MSR
> > + AsmWriteMsr64(msr, data);
> > +
> > + if (bsp_switched)
> > + {
> > + // switch BSP to the saved BSP processor
> > + MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
> > + // update the saved BSP processor
> > + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber); }
> > Py_END_ALLOW_THREADS
> > Py_INCREF(Py_None);
> > return Py_None;
> > @@ -4576,7 +4714,9 @@ static PyMethodDef edk2_methods[] = { #endif
> > {"abort", edk2_abort, METH_NOARGS,
> > edk2_abort__doc__},
> > {"rdmsr", edk2_rdmsr,
> METH_VARARGS,
> > efi_rdmsr__doc__},
> > + {"rdmsr_ex", edk2_rdmsr_ex,
> METH_VARARGS,
> > efi_rdmsr_ex__doc__},
> > {"wrmsr", edk2_wrmsr,
> METH_VARARGS,
> > efi_wrmsr__doc__},
> > + {"wrmsr_ex", edk2_wrmsr_ex,
> METH_VARARGS,
> > efi_wrmsr_ex__doc__},
> > {"readpci", edk2_readpci,
> METH_VARARGS,
> > efi_readpci__doc__},
> > {"writepci", edk2_writepci,
> METH_VARARGS,
> > efi_writepci__doc__},
> > {"readmem", posix_readmem,
> > METH_VARARGS, efi_readmem__doc__},
> > @@ -4813,13 +4953,24 @@ static struct PyModuleDef edk2module = {
> > PyMODINIT_FUNC
> > PyEdk2__Init(void)
> > {
> > - PyObject *m;
> > + PyObject *m;
> > + EFI_STATUS Status = 0;
> >
> > #ifndef UEFI_C_SOURCE
> > PyObject *v;
> > #endif
> > + Status = gBS->LocateProtocol(&gEfiMpServiceProtocolGuid, NULL,
> > &gpMpService);
> > + if (EFI_ERROR(Status))
> > + {
> > + printf("Unable to locate the Protocol MpServices protocol:
> > %r\n", Status);
> > + return NULL;
> > + }
> > + // Get the current BSP processor number
> > + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
> > + // Get the number of processors
> > + MpServicesGetNumberOfProcessors(gpMpService,
> > &gNumberOfProcessors,
> > + &gNumberOfEnabledProcessors);
> >
> > - m = PyModule_Create(&edk2module);
> > + m = PyModule_Create(&edk2module);
> > if (m == NULL)
> > return m;
> >
> > @@ -4870,7 +5021,7 @@ PyEdk2__Init(void)
> > //PyModule_AddObject(m, "statvfs_result",
> > // (PyObject*) &StatVFSResultType);
> > initialized = 1;
> > - return m;
> > + return m;
> >
> > }
> >
> > diff --git a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > index 8b7f677..eca98b5 100644
> > --- a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > +++ b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > @@ -46,6 +46,9 @@
> > #BsdSocketLib
> > #EfiSocketLib
> >
> > +[Protocols]
> > + gEfiMpServiceProtocolGuid ## CONSUMES
> > +
> > [FixedPcd]
> > gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x0F
> > gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000040
> > --
> > 2.40.0.windows.1
> >
> >
> >
> >
> >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#118232): https://edk2.groups.io/g/devel/message/118232
Mute This Topic: https://groups.io/mt/105530360/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs
2024-04-24 18:13 ` Jayaprakash, N
@ 2024-05-02 17:13 ` Michael D Kinney
0 siblings, 0 replies; 9+ messages in thread
From: Michael D Kinney @ 2024-05-02 17:13 UTC (permalink / raw)
To: Jayaprakash, N, devel@edk2.groups.io; +Cc: Rebecca Cran, Kinney, Michael D
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Mike
> -----Original Message-----
> From: Jayaprakash, N <n.jayaprakash@intel.com>
> Sent: Wednesday, April 24, 2024 11:14 AM
> To: devel@edk2.groups.io; Jayaprakash, N <n.jayaprakash@intel.com>;
> Kinney, Michael D <michael.d.kinney@intel.com>
> Cc: Rebecca Cran <rebecca@bsdio.com>
> Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex &
> wrmsr_ex functions to read/write cpu specific msrs
>
> Hi Mike,
>
> I have sent an updated patch v2 for review which uses the MP Services
> protocol API StarupThisAP() to read / write MSRs specific to CPU cores.
> Please review and do the needful.
>
> Regards,
> JP
>
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> Jayaprakash, N
> Sent: Thursday, April 18, 2024 11:49 AM
> To: Kinney, Michael D <michael.d.kinney@intel.com>; devel@edk2.groups.io
> Cc: Rebecca Cran <rebecca@bsdio.com>
> Subject: Re: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex &
> wrmsr_ex functions to read/write cpu specific msrs
>
> Thanks Mike. I shall make necessary changes and submit the PR again for
> review.
>
> Regards,
> JP
>
> -----Original Message-----
> From: Kinney, Michael D <michael.d.kinney@intel.com>
> Sent: Thursday, April 18, 2024 10:46 AM
> To: Jayaprakash, N <n.jayaprakash@intel.com>; devel@edk2.groups.io
> Cc: Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>
> Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex &
> wrmsr_ex functions to read/write cpu specific msrs
>
> Please use MP Services Protocol APIs StartupAllAPs() or StarupThisAP()
> to read/write MSRs on other logical processors.
>
> There and many examples of this in the UefiCpuPkg to programming MSRs on
> all the logical processors.
>
> Mike
>
> > -----Original Message-----
> > From: Jayaprakash, N <n.jayaprakash@intel.com>
> > Sent: Wednesday, April 17, 2024 8:16 PM
> > To: Kinney, Michael D <michael.d.kinney@intel.com>;
> > devel@edk2.groups.io
> > Cc: Rebecca Cran <rebecca@bsdio.com>
> > Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex
> > & wrmsr_ex functions to read/write cpu specific msrs
> >
> > In the validation and debug scenarios, engineers tend to read MSRs and
> > write to MSRs of different CPUs.
> > So we are providing a simple mechanism through these APIs to enable
> > them to do these operations.
> >
> > These APIs will be part of the edk2 module of the Python interpreter
> > and will be used during the validation and debug scenarios only.
> >
> > This is not for switching the BSP for OS boot. This is only used
> > during the validation and debug use cases.
> >
> > Regards,
> > JP
> > -----Original Message-----
> > From: Kinney, Michael D <michael.d.kinney@intel.com>
> > Sent: Thursday, April 18, 2024 12:08 AM
> > To: Jayaprakash, N <n.jayaprakash@intel.com>; devel@edk2.groups.io
> > Cc: Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D
> > <michael.d.kinney@intel.com>
> > Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex
> > & wrmsr_ex functions to read/write cpu specific msrs
> >
> > Hi JP,
> >
> > Is there a reason switch BSP is being used. That is not a common
> > operation and is typically used if the current BSP is not stable or
> > there is a good reason to switch the BSP for OS boot.
> >
> > The MP Services can be used to execute a C function on APs to execute
> > MSR related instructions.
> >
> > Mike
> >
> > > -----Original Message-----
> > > From: Jayaprakash, N <n.jayaprakash@intel.com>
> > > Sent: Sunday, April 14, 2024 10:33 PM
> > > To: devel@edk2.groups.io; Jayaprakash, N <n.jayaprakash@intel.com>
> > > Cc: Rebecca Cran <rebecca@bsdio.com>; Kinney, Michael D
> > > <michael.d.kinney@intel.com>
> > > Subject: RE: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add
> > rdmsr_ex
> > > & wrmsr_ex functions to read/write cpu specific msrs
> > >
> > > + Rebecca and Mike,
> > >
> > > Would you be able to review this PR?
> > >
> > > Regards,
> > > JP
> > >
> > > -----Original Message-----
> > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > > Jayaprakash, N
> > > Sent: Wednesday, April 10, 2024 11:49 AM
> > > To: devel@edk2.groups.io
> > > Cc: Jayaprakash, N <n.jayaprakash@intel.com>; Rebecca Cran
> > > <rebecca@bsdio.com>; Kinney, Michael D <michael.d.kinney@intel.com>
> > > Subject: [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex &
> > > wrmsr_ex functions to read/write cpu specific msrs
> > >
> > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4746
> > >
> > > The rdmsr_ex and wrmsr_ex are extension APIs to the rdmsr and wrmsr
> > > APIs supported in edk2 module. These extension APIs makes it
> > possible
> > > to read / write MSRs from specific processors and fills an existing
> > > gap in this area.
> > >
> > > Cc: Rebecca Cran <rebecca@bsdio.com>
> > > Cc: Michael D Kinney <michael.d.kinney@intel.com>
> > > Cc: Jayaprakash N <n.jayaprakash@intel.com>
> > > Signed-off-by: Jayaprakash N <n.jayaprakash@intel.com>
> > > ---
> > > .../PyMod-3.6.8/Modules/edk2module.c | 159
> > > +++++++++++++++++-
> > > .../Python/Python-3.6.8/Python368.inf | 3 +
> > > 2 files changed, 158 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> > > 3.6.8/Modules/edk2module.c b/AppPkg/Applications/Python/Python-
> > > 3.6.8/PyMod-3.6.8/Modules/edk2module.c
> > > index d6af8da..f1b13a6 100644
> > > --- a/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> > > 3.6.8/Modules/edk2module.c
> > > +++ b/AppPkg/Applications/Python/Python-3.6.8/PyMod-
> > > 3.6.8/Modules/edk2mo
> > > +++ dule.c
> > > @@ -3,7 +3,7 @@
> > > Derived from posixmodule.c in Python 2.7.2.
> > >
> > > Copyright (c) 2015, Daryl McDaniel. All rights reserved.<BR>
> > > - Copyright (c) 2011 - 2023, Intel Corporation. All rights
> > > reserved.<BR>
> > > + Copyright (c) 2011 - 2024, Intel Corporation. All rights
> > > + reserved.<BR>
> > > This program and the accompanying materials are licensed and
> > made
> > > available under
> > > the terms and conditions of the BSD License that accompanies
> > this
> > > distribution.
> > > The full text of the license may be found at @@ -22,16 +22,23
> > @@
> > > #include <wchar.h> #include <sys/syslimits.h> #include <Uefi.h>
> > > +#include <Pi/PiDxeCis.h> // Needed for the definition of
> > > EFI_AP_PROCEDURE
> > > #include <Library/UefiLib.h>
> > > #include <Library/PciLib.h>
> > > #include <Library/IoLib.h>
> > > #include <Library/UefiRuntimeServicesTableLib.h>
> > > +#include <Library/UefiBootServicesTableLib.h>
> > > +#include <Protocol/MpService.h>
> > >
> > > #ifdef __cplusplus
> > > extern "C" {
> > > #endif
> > >
> > > PyTypeObject EfiGuidType;
> > > +EFI_MP_SERVICES_PROTOCOL *gpMpService = NULL;
> > > +UINTN gBSPProcessorNumber = 0;
> > > +UINTN gNumberOfProcessors = 0;
> > > +UINTN gNumberOfEnabledProcessors = 0;
> > >
> > > extern void _swsmi( unsigned int smi_code_data, unsigned int
> > > rax_value, unsigned int rbx_value, unsigned int rcx_value, unsigned
> > > int rdx_value, unsigned int rsi_value, unsigned int rdi_value ); //
> > -
> > > - Support routines @@ -169,6 +176,35 @@ PyDoc_STRVAR(edk2__doc__,
> > > /* dummy version. _PyVerify_fd() is already defined in fileobject.h
> > > */ #define _PyVerify_fd_dup2(A, B) (1)
> > >
> > > +static EFI_STATUS
> > > +MpServicesWhoAmI (
> > > + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> > > + OUT UINTN *pProcessorNumber
> > > + )
> > > +{
> > > + return pMpService->WhoAmI (pMpService, pProcessorNumber); }
> > > +
> > > +static EFI_STATUS
> > > +MpServicesGetNumberOfProcessors (
> > > + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> > > + OUT UINTN *pNumberOfProcessors,
> > > + OUT UINTN *pNumberOfEnabledProcessors
> > > +
> > > + )
> > > +{
> > > + return pMpService->GetNumberOfProcessors (pMpService,
> > > +pNumberOfProcessors, pNumberOfEnabledProcessors); }
> > > +
> > > +static EFI_STATUS
> > > +MpServicesSwitchBSP (
> > > + IN EFI_MP_SERVICES_PROTOCOL *pMpService,
> > > + IN UINTN ProcessorNumber
> > > + )
> > > +{
> > > + return pMpService->SwitchBSP(pMpService, ProcessorNumber, TRUE);
> > }
> > > +
> > > #ifndef UEFI_C_SOURCE
> > > /* Return a dictionary corresponding to the POSIX environment table
> > > */ extern char **environ; @@ -3865,6 +3901,56 @@
> > edk2_rdmsr(PyObject
> > > *self, PyObject *args)
> > > return Py_BuildValue("(II)", (unsigned long)veax, (unsigned
> > > long)vedx); }
> > >
> > > +PyDoc_STRVAR(efi_rdmsr_ex__doc__,
> > > +"rdmsr_ex(cpu, msr) -> (lower_32bits, higher_32bits)\n\ \n\ Read
> > the
> > > +given msr by switching to cpu and return the data as tuple.\n\ \n\
> > > +Parameters:\n\
> > > + cpu - The cpu number in hex or int format\n\
> > > + msr - The msr in hex or int format\n\ \n\ Return Value:\n\
> > > + a tuple with lower and higher 32 bit values read from the
> > msr\n\
> > > +");
> > > +
> > > +static PyObject *
> > > +edk2_rdmsr_ex(PyObject *self, PyObject *args) {
> > > + unsigned int cpu, vecx, veax, vedx;
> > > + unsigned int bsp_switched = 0;
> > > + EFI_STATUS status = 0;
> > > + UINT64 data = 0;
> > > +
> > > + if (!PyArg_ParseTuple(args, "II", &cpu, &vecx))
> > > + return NULL;
> > > +
> > > + Py_BEGIN_ALLOW_THREADS
> > > + if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors) {
> > > + //switch the BSP to the cpu
> > > + status = MpServicesSwitchBSP(gpMpService, cpu);
> > > + if (!EFI_ERROR(status))
> > > + {
> > > + bsp_switched = 1;
> > > + }
> > > + }
> > > +
> > > + data = AsmReadMsr64(vecx);
> > > +
> > > + if (bsp_switched)
> > > + {
> > > + // switch BSP to the saved BSP processor
> > > + MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
> > > + // update the saved BSP processor
> > > + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
> > > + }
> > > + Py_END_ALLOW_THREADS
> > > + veax = (UINT32)data;
> > > + vedx = (UINT64)data >> 32;
> > > + return Py_BuildValue("(II)", (unsigned long)veax, (unsigned
> > > +long)vedx); }
> > > +
> > > PyDoc_STRVAR(efi_wrmsr__doc__,
> > > "wrmsr(msr, lower_32bits, higher_32bits) -> None\n\ \n\ @@ -3889,6
> > > +3975,58 @@ edk2_wrmsr(PyObject *self, PyObject *args)
> > > data = vedx << 32 | veax;
> > > Py_BEGIN_ALLOW_THREADS
> > > AsmWriteMsr64(vecx, data);
> > > + Py_END_ALLOW_THREADS
> > > + Py_INCREF(Py_None);
> > > + return Py_None;
> > > +}
> > > +
> > > +PyDoc_STRVAR(efi_wrmsr_ex__doc__,
> > > +"wrmsr_ex(cpu, msr, lower_32bits, higher_32bits) -> None\n\ \n\
> > > Writes
> > > +higher_32bits:lower_32bits to the given msr.\n\ \n\ Parameters:\n\
> > > + cpu - The cpu number in hex or int format\n\
> > > + msr - The msr in hex or int format\n\
> > > + lower_32bits - The lower 32 bit data for the msr\n\
> > > + higher_32bits - The higher 32 bit data for the msr\n\ \n\
> > Return
> > > +Value:\n\
> > > + None\n\
> > > +");
> > > +
> > > +static PyObject *
> > > +edk2_wrmsr_ex(PyObject *self, PyObject *args) {
> > > + unsigned int cpu, msr, veax, vedx;
> > > + unsigned int bsp_switched = 0;
> > > + EFI_STATUS status = 0;
> > > + UINT64 data = 0;
> > > +
> > > + if (!PyArg_ParseTuple(args, "IIII", &cpu, &msr, &veax, &vedx))
> > > + return NULL;
> > > + data = (((UINT64)vedx) << 32) | veax;
> > > +
> > > + Py_BEGIN_ALLOW_THREADS
> > > + if (cpu != gBSPProcessorNumber && cpu < gNumberOfProcessors) {
> > > + //switch the BSP to the cpu
> > > + status = MpServicesSwitchBSP(gpMpService, cpu);
> > > + if (!EFI_ERROR(status))
> > > + {
> > > + bsp_switched = 1;
> > > + }
> > > + }
> > > + // write to MSR
> > > + AsmWriteMsr64(msr, data);
> > > +
> > > + if (bsp_switched)
> > > + {
> > > + // switch BSP to the saved BSP processor
> > > + MpServicesSwitchBSP(gpMpService, gBSPProcessorNumber);
> > > + // update the saved BSP processor
> > > + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber); }
> > > Py_END_ALLOW_THREADS
> > > Py_INCREF(Py_None);
> > > return Py_None;
> > > @@ -4576,7 +4714,9 @@ static PyMethodDef edk2_methods[] = { #endif
> > > {"abort", edk2_abort, METH_NOARGS,
> > > edk2_abort__doc__},
> > > {"rdmsr", edk2_rdmsr,
> > METH_VARARGS,
> > > efi_rdmsr__doc__},
> > > + {"rdmsr_ex", edk2_rdmsr_ex,
> > METH_VARARGS,
> > > efi_rdmsr_ex__doc__},
> > > {"wrmsr", edk2_wrmsr,
> > METH_VARARGS,
> > > efi_wrmsr__doc__},
> > > + {"wrmsr_ex", edk2_wrmsr_ex,
> > METH_VARARGS,
> > > efi_wrmsr_ex__doc__},
> > > {"readpci", edk2_readpci,
> > METH_VARARGS,
> > > efi_readpci__doc__},
> > > {"writepci", edk2_writepci,
> > METH_VARARGS,
> > > efi_writepci__doc__},
> > > {"readmem", posix_readmem,
> > > METH_VARARGS, efi_readmem__doc__},
> > > @@ -4813,13 +4953,24 @@ static struct PyModuleDef edk2module = {
> > > PyMODINIT_FUNC
> > > PyEdk2__Init(void)
> > > {
> > > - PyObject *m;
> > > + PyObject *m;
> > > + EFI_STATUS Status = 0;
> > >
> > > #ifndef UEFI_C_SOURCE
> > > PyObject *v;
> > > #endif
> > > + Status = gBS->LocateProtocol(&gEfiMpServiceProtocolGuid, NULL,
> > > &gpMpService);
> > > + if (EFI_ERROR(Status))
> > > + {
> > > + printf("Unable to locate the Protocol MpServices protocol:
> > > %r\n", Status);
> > > + return NULL;
> > > + }
> > > + // Get the current BSP processor number
> > > + MpServicesWhoAmI(gpMpService, &gBSPProcessorNumber);
> > > + // Get the number of processors
> > > + MpServicesGetNumberOfProcessors(gpMpService,
> > > &gNumberOfProcessors,
> > > + &gNumberOfEnabledProcessors);
> > >
> > > - m = PyModule_Create(&edk2module);
> > > + m = PyModule_Create(&edk2module);
> > > if (m == NULL)
> > > return m;
> > >
> > > @@ -4870,7 +5021,7 @@ PyEdk2__Init(void)
> > > //PyModule_AddObject(m, "statvfs_result",
> > > // (PyObject*) &StatVFSResultType);
> > > initialized = 1;
> > > - return m;
> > > + return m;
> > >
> > > }
> > >
> > > diff --git a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > > b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > > index 8b7f677..eca98b5 100644
> > > --- a/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > > +++ b/AppPkg/Applications/Python/Python-3.6.8/Python368.inf
> > > @@ -46,6 +46,9 @@
> > > #BsdSocketLib
> > > #EfiSocketLib
> > >
> > > +[Protocols]
> > > + gEfiMpServiceProtocolGuid ## CONSUMES
> > > +
> > > [FixedPcd]
> > > gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x0F
> > > gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x80000040
> > > --
> > > 2.40.0.windows.1
> > >
> > >
> > >
> > >
> > >
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#118536): https://edk2.groups.io/g/devel/message/118536
Mute This Topic: https://groups.io/mt/105530360/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2024-05-02 17:13 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-04-10 6:18 [edk2-devel] [edk2-libc Patch 0/1] add rdmsr_ex & wrmsr_ex functions to read/write msrs from specific cpu Jayaprakash, N
2024-04-10 6:18 ` [edk2-devel] [edk2-libc Patch 1/1] edk2-libc:add rdmsr_ex & wrmsr_ex functions to read/write cpu specific msrs Jayaprakash, N
[not found] ` <17C4D6CE42E68D40.16800@groups.io>
2024-04-15 5:32 ` Jayaprakash, N
2024-04-17 18:38 ` Michael D Kinney
2024-04-18 3:16 ` Jayaprakash, N
2024-04-18 5:16 ` Michael D Kinney
2024-04-18 6:18 ` Jayaprakash, N
[not found] ` <17C74B724102AC1D.15491@groups.io>
2024-04-24 18:13 ` Jayaprakash, N
2024-05-02 17:13 ` Michael D Kinney
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox