From: "Michael D Kinney" <michael.d.kinney@intel.com>
To: "Zhang, Qi1" <qi1.zhang@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>,
"Yao, Jiewen" <jiewen.yao@intel.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Wang, Jian J" <jian.j.wang@intel.com>
Subject: Re: [edk2-devel] [PATCH] SecurityPkg: Add retry mechanism for tpm command
Date: Thu, 28 Jul 2022 01:40:41 +0000 [thread overview]
Message-ID: <CO1PR11MB492961EC5574F24C530970C9D2969@CO1PR11MB4929.namprd11.prod.outlook.com> (raw)
In-Reply-To: <DM8PR11MB5750ED27F0B39E96C8479BFCB2969@DM8PR11MB5750.namprd11.prod.outlook.com>
The commit message and comments for the #defines
for the retry count and timeouts should state that
the values are required by spec and name the spec.
Thanks,
Mike
> -----Original Message-----
> From: Zhang, Qi1 <qi1.zhang@intel.com>
> Sent: Wednesday, July 27, 2022 5:41 PM
> To: Kinney, Michael D <michael.d.kinney@intel.com>; devel@edk2.groups.io; Yao, Jiewen <jiewen.yao@intel.com>
> Cc: Wang, Jian J <jian.j.wang@intel.com>
> Subject: RE: [edk2-devel] [PATCH] SecurityPkg: Add retry mechanism for tpm command
>
> Retry count is suggested in the spec.
>
> PtpCrbWaitRegisterBits() already has delay.
>
> Thanks!
> Qi Zhang
>
> -----Original Message-----
> From: Kinney, Michael D <michael.d.kinney@intel.com>
> Sent: Thursday, July 28, 2022 12:38 AM
> To: devel@edk2.groups.io; Yao, Jiewen <jiewen.yao@intel.com>; Zhang, Qi1 <qi1.zhang@intel.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>
> Cc: Wang, Jian J <jian.j.wang@intel.com>
> Subject: RE: [edk2-devel] [PATCH] SecurityPkg: Add retry mechanism for tpm command
>
> Why is 3 the correct retry count?
>
> Do we need this to be configurable?
>
> Is a delay required between retries?
>
> What specific state is a DTPM getting into that requires this retry mechanism? Can that state be detected?
>
> Thanks,
>
> Mike
>
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Yao,
> > Jiewen
> > Sent: Wednesday, July 27, 2022 5:07 AM
> > To: Zhang, Qi1 <qi1.zhang@intel.com>; devel@edk2.groups.io
> > Cc: Wang, Jian J <jian.j.wang@intel.com>
> > Subject: Re: [edk2-devel] [PATCH] SecurityPkg: Add retry mechanism for
> > tpm command
> >
> > Thanks. Please add Bugzilla ID and add tested-by tag by the people who performed the test.
> >
> > For the code, reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
> >
> > > -----Original Message-----
> > > From: Zhang, Qi1 <qi1.zhang@intel.com>
> > > Sent: Wednesday, July 27, 2022 7:36 PM
> > > To: devel@edk2.groups.io
> > > Cc: Zhang, Qi1 <qi1.zhang@intel.com>; Yao, Jiewen
> > > <jiewen.yao@intel.com>; Wang, Jian J <jian.j.wang@intel.com>
> > > Subject: [PATCH] SecurityPkg: Add retry mechanism for tpm command
> > >
> > > Signed-off-by: Qi Zhang <qi1.zhang@intel.com>
> > > Cc: Jiewen Yao <jiewen.yao@intel.com>
> > > Cc: Jian J Wang <jian.j.wang@intel.com>
> > > ---
> > > .../Library/Tpm2DeviceLibDTpm/Tpm2Ptp.c | 107 +++++++++++-------
> > > 1 file changed, 68 insertions(+), 39 deletions(-)
> > >
> > > diff --git a/SecurityPkg/Library/Tpm2DeviceLibDTpm/Tpm2Ptp.c
> > > b/SecurityPkg/Library/Tpm2DeviceLibDTpm/Tpm2Ptp.c
> > > index 1d99beaa10..6b5994fde2 100644
> > > --- a/SecurityPkg/Library/Tpm2DeviceLibDTpm/Tpm2Ptp.c
> > > +++ b/SecurityPkg/Library/Tpm2DeviceLibDTpm/Tpm2Ptp.c
> > > @@ -33,6 +33,11 @@ SPDX-License-Identifier: BSD-2-Clause-Patent //
> > >
> > > #define TPMCMDBUFLENGTH 0x500
> > >
> > >
> > >
> > > +//
> > >
> > > +// Max retry count
> > >
> > > +//
> > >
> > > +#define RETRY_CNT_MAX 3
> > >
> > > +
> > >
> > > /**
> > >
> > > Check whether TPM PTP register exist.
> > >
> > >
> > >
> > > @@ -153,6 +158,7 @@ PtpCrbTpmCommand (
> > > UINT32 TpmOutSize;
> > >
> > > UINT16 Data16;
> > >
> > > UINT32 Data32;
> > >
> > > + UINT8 RetryCnt;
> > >
> > >
> > >
> > > DEBUG_CODE_BEGIN ();
> > >
> > > UINTN DebugSize;
> > >
> > > @@ -179,53 +185,76 @@ PtpCrbTpmCommand (
> > > DEBUG_CODE_END ();
> > >
> > > TpmOutSize = 0;
> > >
> > >
> > >
> > > - //
> > >
> > > - // STEP 0:
> > >
> > > - // if CapCRbIdelByPass == 0, enforce Idle state before sending
> > > command
> > >
> > > - //
> > >
> > > - if ((GetCachedIdleByPass () == 0) && ((MmioRead32
> > > ((UINTN)&CrbReg-
> > > >CrbControlStatus) & PTP_CRB_CONTROL_AREA_STATUS_TPM_IDLE) == 0)) {
> > >
> > > + RetryCnt = 0;
> > >
> > > + while (TRUE) {
> > >
> > > + //
> > >
> > > + // STEP 0:
> > >
> > > + // if CapCRbIdelByPass == 0, enforce Idle state before sending
> > > + command
> > >
> > > + //
> > >
> > > + if ((GetCachedIdleByPass () == 0) && ((MmioRead32
> > > + ((UINTN)&CrbReg-
> > > >CrbControlStatus) & PTP_CRB_CONTROL_AREA_STATUS_TPM_IDLE) == 0)) {
> > >
> > > + Status = PtpCrbWaitRegisterBits (
> > >
> > > + &CrbReg->CrbControlStatus,
> > >
> > > + PTP_CRB_CONTROL_AREA_STATUS_TPM_IDLE,
> > >
> > > + 0,
> > >
> > > + PTP_TIMEOUT_C
> > >
> > > + );
> > >
> > > + if (EFI_ERROR (Status)) {
> > >
> > > + RetryCnt++;
> > >
> > > + if (RetryCnt < RETRY_CNT_MAX) {
> > >
> > > + MmioWrite32 ((UINTN)&CrbReg->CrbControlRequest,
> > > PTP_CRB_CONTROL_AREA_REQUEST_GO_IDLE);
> > >
> > > + continue;
> > >
> > > + } else {
> > >
> > > + //
> > >
> > > + // Try to goIdle to recover TPM
> > >
> > > + //
> > >
> > > + Status = EFI_DEVICE_ERROR;
> > >
> > > + goto GoIdle_Exit;
> > >
> > > + }
> > >
> > > + }
> > >
> > > + }
> > >
> > > +
> > >
> > > + //
> > >
> > > + // STEP 1:
> > >
> > > + // Ready is any time the TPM is ready to receive a command,
> > > + following a
> > > write
> > >
> > > + // of 1 by software to Request.cmdReady, as indicated by the
> > > + Status field
> > >
> > > + // being cleared to 0.
> > >
> > > + //
> > >
> > > + MmioWrite32 ((UINTN)&CrbReg->CrbControlRequest,
> > > PTP_CRB_CONTROL_AREA_REQUEST_COMMAND_READY);
> > >
> > > Status = PtpCrbWaitRegisterBits (
> > >
> > > - &CrbReg->CrbControlStatus,
> > >
> > > - PTP_CRB_CONTROL_AREA_STATUS_TPM_IDLE,
> > >
> > > + &CrbReg->CrbControlRequest,
> > >
> > > 0,
> > >
> > > + PTP_CRB_CONTROL_AREA_REQUEST_COMMAND_READY,
> > >
> > > PTP_TIMEOUT_C
> > >
> > > );
> > >
> > > if (EFI_ERROR (Status)) {
> > >
> > > - //
> > >
> > > - // Try to goIdle to recover TPM
> > >
> > > - //
> > >
> > > - Status = EFI_DEVICE_ERROR;
> > >
> > > - goto GoIdle_Exit;
> > >
> > > + RetryCnt++;
> > >
> > > + if (RetryCnt < RETRY_CNT_MAX) {
> > >
> > > + MmioWrite32 ((UINTN)&CrbReg->CrbControlRequest,
> > > PTP_CRB_CONTROL_AREA_REQUEST_GO_IDLE);
> > >
> > > + continue;
> > >
> > > + } else {
> > >
> > > + Status = EFI_DEVICE_ERROR;
> > >
> > > + goto GoIdle_Exit;
> > >
> > > + }
> > >
> > > }
> > >
> > > - }
> > >
> > >
> > >
> > > - //
> > >
> > > - // STEP 1:
> > >
> > > - // Ready is any time the TPM is ready to receive a command,
> > > following a write
> > >
> > > - // of 1 by software to Request.cmdReady, as indicated by the
> > > Status field
> > >
> > > - // being cleared to 0.
> > >
> > > - //
> > >
> > > - MmioWrite32 ((UINTN)&CrbReg->CrbControlRequest,
> > > PTP_CRB_CONTROL_AREA_REQUEST_COMMAND_READY);
> > >
> > > - Status = PtpCrbWaitRegisterBits (
> > >
> > > - &CrbReg->CrbControlRequest,
> > >
> > > - 0,
> > >
> > > - PTP_CRB_CONTROL_AREA_REQUEST_COMMAND_READY,
> > >
> > > - PTP_TIMEOUT_C
> > >
> > > - );
> > >
> > > - if (EFI_ERROR (Status)) {
> > >
> > > - Status = EFI_DEVICE_ERROR;
> > >
> > > - goto GoIdle_Exit;
> > >
> > > - }
> > >
> > > + Status = PtpCrbWaitRegisterBits (
> > >
> > > + &CrbReg->CrbControlStatus,
> > >
> > > + 0,
> > >
> > > + PTP_CRB_CONTROL_AREA_STATUS_TPM_IDLE,
> > >
> > > + PTP_TIMEOUT_C
> > >
> > > + );
> > >
> > > + if (EFI_ERROR (Status)) {
> > >
> > > + RetryCnt++;
> > >
> > > + if (RetryCnt < RETRY_CNT_MAX) {
> > >
> > > + MmioWrite32 ((UINTN)&CrbReg->CrbControlRequest,
> > > PTP_CRB_CONTROL_AREA_REQUEST_GO_IDLE);
> > >
> > > + continue;
> > >
> > > + } else {
> > >
> > > + Status = EFI_DEVICE_ERROR;
> > >
> > > + goto GoIdle_Exit;
> > >
> > > + }
> > >
> > > + }
> > >
> > >
> > >
> > > - Status = PtpCrbWaitRegisterBits (
> > >
> > > - &CrbReg->CrbControlStatus,
> > >
> > > - 0,
> > >
> > > - PTP_CRB_CONTROL_AREA_STATUS_TPM_IDLE,
> > >
> > > - PTP_TIMEOUT_C
> > >
> > > - );
> > >
> > > - if (EFI_ERROR (Status)) {
> > >
> > > - Status = EFI_DEVICE_ERROR;
> > >
> > > - goto GoIdle_Exit;
> > >
> > > + break;
> > >
> > > }
> > >
> > >
> > >
> > > //
> > >
> > > --
> > > 2.26.2.windows.1
> >
> >
> >
> >
> >
prev parent reply other threads:[~2022-07-28 1:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-27 11:35 [PATCH] SecurityPkg: Add retry mechanism for tpm command Qi Zhang
2022-07-27 12:06 ` Yao, Jiewen
2022-07-27 16:37 ` [edk2-devel] " Michael D Kinney
2022-07-28 0:40 ` Qi Zhang
2022-07-28 1:40 ` Michael D Kinney [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CO1PR11MB492961EC5574F24C530970C9D2969@CO1PR11MB4929.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox