From: "Michael D Kinney" <michael.d.kinney@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"jbrasen@nvidia.com" <jbrasen@nvidia.com>,
"Demeter, Miki" <miki.demeter@intel.com>
Cc: "Kinney, Michael D" <michael.d.kinney@intel.com>
Subject: Re: [edk2-devel] [PATCH v2] MdeModulePkg/EsrtFmpDxe: Support multiple devices with 0 HardwareInstance
Date: Fri, 10 Feb 2023 19:47:33 +0000 [thread overview]
Message-ID: <CO1PR11MB49298F6D28231E6C5A35174DD2DE9@CO1PR11MB4929.namprd11.prod.outlook.com> (raw)
In-Reply-To: <DS7PR12MB5789E02389583B27A0011222CBDE9@DS7PR12MB5789.namprd12.prod.outlook.com>
Did your original approach work for all your use cases?
Mike
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Jeff Brasen via groups.io
> Sent: Friday, February 10, 2023 8:45 AM
> To: Kinney, Michael D <michael.d.kinney@intel.com>; devel@edk2.groups.io; Demeter, Miki <miki.demeter@intel.com>
> Subject: Re: [edk2-devel] [PATCH v2] MdeModulePkg/EsrtFmpDxe: Support multiple devices with 0 HardwareInstance
>
> That was my original approach when I saw this but I was seeing this occur on a device with FmpVersion == 3. The UEFI spec isn't
> completely clear but could be read that 0 is legal if this part isn't being used.
>
> https://uefi.org/specs/UEFI/2.10/23_Firmware_Update_and_Reporting.html#efi-firmware-management-protocol-getimageinfo
>
> It does state that this is Optional, and has a statement "A zero means the FMP provider is not able to determine a unique
> hardware instance number or a hardware instance number is not needed."
>
> Also, our ESRT implementation just merges all instances to one anyways so it doesn't currently consume the hardware instance
> except for this check.
>
> Thanks,
> Jeff
>
> > -----Original Message-----
> > From: Kinney, Michael D <michael.d.kinney@intel.com>
> > Sent: Thursday, February 9, 2023 8:43 PM
> > To: devel@edk2.groups.io; Jeff Brasen <jbrasen@nvidia.com>; Demeter,
> > Miki <miki.demeter@intel.com>
> > Cc: Kinney, Michael D <michael.d.kinney@intel.com>
> > Subject: RE: [PATCH v2] MdeModulePkg/EsrtFmpDxe: Support multiple
> > devices with 0 HardwareInstance
> >
> > External email: Use caution opening links or attachments
> >
> >
> > Hi Jeff,
> >
> > Thank you for the reminder.
> >
> > I am wondering if the check should be for FmpVersion < 3 and not
> > FmpHardwareInstance != 0.
> >
> > It is possible for an FmpInfoBuffer to have an FmpVersion >= 3 and a
> > HardwareInstance of 0. If more than one of these it found, then that would
> > be an EFI_UNSUPPORTED condition.
> >
> > If FmpVersion >= 3, then the HardwareInstance must be filled in with a
> > unique value. 0 can be used if there is at most 1 instance, so the duplicate
> > check would never be triggered. If FmpVersion >= 3 and there can be more
> > then one instance, then the HardwareInstance must be a non-zero unique
> > value.
> >
> > Thanks,
> >
> > Mike
> >
> > > -----Original Message-----
> > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Jeff
> > > Brasen via groups.io
> > > Sent: Thursday, February 9, 2023 2:03 PM
> > > To: Demeter, Miki <miki.demeter@intel.com>
> > > Cc: devel@edk2.groups.io
> > > Subject: [edk2-devel] FW: [PATCH v2] MdeModulePkg/EsrtFmpDxe:
> > Support
> > > multiple devices with 0 HardwareInstance
> > >
> > > Here is a patch that has been pending for a bit
> > >
> > > Thanks,
> > > Jeff
> > >
> > > -----Original Message-----
> > > From: Jeff Brasen
> > > Sent: Wednesday, February 1, 2023 9:21 AM
> > > To: devel@edk2.groups.io
> > > Cc: jian.j.wang@intel.com; gaoliming@byosoft.com.cn;
> > > guomin.jiang@intel.com
> > > Subject: RE: [PATCH v2] MdeModulePkg/EsrtFmpDxe: Support multiple
> > > devices with 0 HardwareInstance
> > >
> > > Any updates on this would be great to get this in for the next stable release
> > if possible.
> > >
> > > > -----Original Message-----
> > > > From: Jeff Brasen <jbrasen@nvidia.com>
> > > > Sent: Monday, December 12, 2022 12:27 PM
> > > > To: devel@edk2.groups.io
> > > > Cc: jian.j.wang@intel.com; gaoliming@byosoft.com.cn;
> > > > guomin.jiang@intel.com; Jeff Brasen <jbrasen@nvidia.com>
> > > > Subject: [PATCH v2] MdeModulePkg/EsrtFmpDxe: Support multiple
> > > > devices with 0 HardwareInstance
> > > >
> > > > Skip error check if HardwareInstance is 0 as this either means that
> > > > FmpVersion < 3 and not supported or, "A zero means the FMP provider
> > > > is not able to determine a unique hardware instance number or a
> > > > hardware instance number is not needed." per UEFI specification.
> > > >
> > > > As the FmpInstances are merged and HardwareInstance is not used
> > > > remove error check in this case.
> > > >
> > > >
> > > > Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
> > > > ---
> > > > MdeModulePkg/Universal/EsrtFmpDxe/EsrtFmp.c | 22 ++++++++++++--
> > ----
> > > > ---
> > > > 1 file changed, 13 insertions(+), 9 deletions(-)
> > > >
> > > > diff --git a/MdeModulePkg/Universal/EsrtFmpDxe/EsrtFmp.c
> > > > b/MdeModulePkg/Universal/EsrtFmpDxe/EsrtFmp.c
> > > > index 4f47c55cce..5bc627461d 100644
> > > > --- a/MdeModulePkg/Universal/EsrtFmpDxe/EsrtFmp.c
> > > > +++ b/MdeModulePkg/Universal/EsrtFmpDxe/EsrtFmp.c
> > > > @@ -153,16 +153,20 @@ CreateEsrtEntry (
> > > >
> > > > //
> > > > // Check to see of FmpImageInfoBuf GUID/HardwareInstance is
> > > > unique
> > > > + // Skip if HardwareInstance is 0 as this is the case if
> > > > + FmpVersion <
> > > > + 3 // or the device can not create a unique ID per UEFI
> > > > + specification
> > > > //
> > > > - for (Index = 0; Index < *NumberOfDescriptors; Index++) {
> > > > - if (CompareGuid (&HardwareInstances[Index].ImageTypeGuid,
> > > > &FmpImageInfoBuf->ImageTypeId)) {
> > > > - if (HardwareInstances[Index].HardwareInstance ==
> > > > FmpHardwareInstance) {
> > > > - DEBUG ((DEBUG_ERROR, "EsrtFmpDxe: Duplicate firmware image
> > > > descriptor with GUID %g HardwareInstance:0x%x\n",
> > &FmpImageInfoBuf-
> > > > >ImageTypeId, FmpHardwareInstance));
> > > > - ASSERT (
> > > > - !CompareGuid (&HardwareInstances[Index].ImageTypeGuid,
> > > > &FmpImageInfoBuf->ImageTypeId) ||
> > > > - HardwareInstances[Index].HardwareInstance !=
> > > > FmpHardwareInstance
> > > > - );
> > > > - return EFI_UNSUPPORTED;
> > > > + if (FmpHardwareInstance != 0) {
> > > > + for (Index = 0; Index < *NumberOfDescriptors; Index++) {
> > > > + if (CompareGuid (&HardwareInstances[Index].ImageTypeGuid,
> > > > &FmpImageInfoBuf->ImageTypeId)) {
> > > > + if (HardwareInstances[Index].HardwareInstance ==
> > > > FmpHardwareInstance) {
> > > > + DEBUG ((DEBUG_ERROR, "EsrtFmpDxe: Duplicate firmware
> > > > + image
> > > > descriptor with GUID %g HardwareInstance:0x%x\n",
> > &FmpImageInfoBuf-
> > > > >ImageTypeId, FmpHardwareInstance));
> > > > + ASSERT (
> > > > + !CompareGuid (&HardwareInstances[Index].ImageTypeGuid,
> > > > &FmpImageInfoBuf->ImageTypeId) ||
> > > > + HardwareInstances[Index].HardwareInstance !=
> > > > FmpHardwareInstance
> > > > + );
> > > > + return EFI_UNSUPPORTED;
> > > > + }
> > > > }
> > > > }
> > > > }
> > > > --
> > > > 2.25.1
> > >
> > >
> > >
> > >
> > >
>
>
>
>
>
next prev parent reply other threads:[~2023-02-10 19:47 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-12 19:27 [PATCH v2] MdeModulePkg/EsrtFmpDxe: Support multiple devices with 0 HardwareInstance Jeff Brasen
2023-02-01 16:21 ` Jeff Brasen
2023-02-09 22:02 ` FW: " Jeff Brasen
2023-02-10 3:42 ` Michael D Kinney
2023-02-10 16:44 ` Jeff Brasen
2023-02-10 19:47 ` Michael D Kinney [this message]
2023-02-10 20:43 ` [edk2-devel] " Jeff Brasen
2023-02-10 21:17 ` Michael D Kinney
2023-02-10 21:20 ` Jeff Brasen
2023-02-14 23:50 ` Michael D Kinney
2023-02-15 1:59 ` Michael D Kinney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CO1PR11MB49298F6D28231E6C5A35174DD2DE9@CO1PR11MB4929.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox