* [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details
@ 2024-03-08 23:16 Pethaiyan Madhan
2024-03-09 19:34 ` Michael D Kinney
2024-03-09 20:17 ` Michael D Kinney
0 siblings, 2 replies; 8+ messages in thread
From: Pethaiyan Madhan @ 2024-03-08 23:16 UTC (permalink / raw)
To: devel
Cc: Pethaiyan Madhan, Michael D Kinney, Liming Gao, Zhiguang Liu,
Yi Li, GuoX Xu
1.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():
Add the following sentence at the end of the Image parameter
description. "May be NULL with a zero ImageSize in order to determine
the size of the buffer needed".
Modify the description of "EFI_INVALID_PARAMETER" return code as "The
ImageSize is not too small and Image is NULL."
2.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImageInfo():
Add the following sentence at the end of the ImageInfo parameter
description."May be NULL with a zero ImageInfoSize in order to
determine the size of the buffer needed".
Modify the description of "EFI_INVALID_PARAMETER" return code as "The
ImageInfoSize is not too small and Image is NULL." and add new
descriptions for "EFI_INVALID_PARAMETER" return code.
REF: UEFI spec v2.10 23.1.2
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4660
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Yi Li <yi1.li@intel.com>
Cc: GuoX Xu <guox.xu@intel.com>
Signed-off-by: Pethaiyan Madhan <madhan.pethaiyan@intel.com>
---
MdePkg/Include/Protocol/FirmwareManagement.h | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/MdePkg/Include/Protocol/FirmwareManagement.h b/MdePkg/Include/Protocol/FirmwareManagement.h
index e535bb697d..90b7d83c8f 100644
--- a/MdePkg/Include/Protocol/FirmwareManagement.h
+++ b/MdePkg/Include/Protocol/FirmwareManagement.h
@@ -294,6 +294,8 @@ EFI_STATUS
to contain the image(s) information if the buffer was too small.
@param[in, out] ImageInfo A pointer to the buffer in which firmware places the current image(s)
information. The information is an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
+ May be NULL with a zero ImageInfoSize in order to determine the size of the
+ buffer needed.
@param[out] DescriptorVersion A pointer to the location in which firmware returns the version number
associated with the EFI_FIRMWARE_IMAGE_DESCRIPTOR.
@param[out] DescriptorCount A pointer to the location in which firmware returns the number of
@@ -314,7 +316,12 @@ EFI_STATUS
@retval EFI_SUCCESS The device was successfully updated with the new image.
@retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too small. The current buffer size
needed to hold the image(s) information is returned in ImageInfoSize.
- @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is not too small and ImageInfo is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorVersion is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorCount is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorSize is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and PackageVersion is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and PackageVersionName is NULL.
@retval EFI_DEVICE_ERROR Valid information could not be returned. Possible corrupted image.
**/
@@ -341,6 +348,9 @@ EFI_STATUS
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device.
The number is between 1 and DescriptorCount.
@param[out] Image Points to the buffer where the current image is copied to.
+ May be NULL with a zero ImageSize in order to determine the size of the
+ buffer needed.
+
@param[in, out] ImageSize On entry, points to the size of the buffer pointed to by Image, in bytes.
On return, points to the length of the image, in bytes.
@@ -348,7 +358,7 @@ EFI_STATUS
@retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to hold the
image. The current buffer size needed to hold the image is returned
in ImageSize.
- @retval EFI_INVALID_PARAMETER The Image was NULL.
+ @retval EFI_INVALID_PARAMETER The ImageSize is not too small and Image is NULL.
@retval EFI_NOT_FOUND The current image is not copied to the buffer.
@retval EFI_UNSUPPORTED The operation is not supported.
@retval EFI_SECURITY_VIOLATION The operation could not be performed due to an authentication failure.
--
2.38.1.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#116555): https://edk2.groups.io/g/devel/message/116555
Mute This Topic: https://groups.io/mt/104819885/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details
2024-03-08 23:16 [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details Pethaiyan Madhan
@ 2024-03-09 19:34 ` Michael D Kinney
2024-03-09 20:17 ` Michael D Kinney
1 sibling, 0 replies; 8+ messages in thread
From: Michael D Kinney @ 2024-03-09 19:34 UTC (permalink / raw)
To: devel@edk2.groups.io, Pethaiyan, Madhan
Cc: Liming Gao, Liu, Zhiguang, Li, Yi1, GuoX Xu, Kinney, Michael D
Does anyone know why this condition was dropped between
UEFI 2.7 and UEFI 2.8 for Firmware Management Protocol
GetImageInfo()?
EFI_INVALID_PARAMETER ImageInfoSize is NULL.
It seems the updated return code assumes ImageInfoSize
is not NULL to perform those checks.
Thanks,
Mike
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> Pethaiyan Madhan
> Sent: Friday, March 8, 2024 3:17 PM
> To: devel@edk2.groups.io
> Cc: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>; Liming Gao <gaoliming@byosoft.com.cn>;
> Liu, Zhiguang <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>;
> GuoX Xu <guox.xu@intel.com>
> Subject: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo
> description details
>
> 1.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():
> Add the following sentence at the end of the Image parameter
> description. "May be NULL with a zero ImageSize in order to determine
> the size of the buffer needed".
>
> Modify the description of "EFI_INVALID_PARAMETER" return code as "The
> ImageSize is not too small and Image is NULL."
>
> 2.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImageInfo():
> Add the following sentence at the end of the ImageInfo parameter
> description."May be NULL with a zero ImageInfoSize in order to
> determine the size of the buffer needed".
>
> Modify the description of "EFI_INVALID_PARAMETER" return code as "The
> ImageInfoSize is not too small and Image is NULL." and add new
> descriptions for "EFI_INVALID_PARAMETER" return code.
>
> REF: UEFI spec v2.10 23.1.2
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4660
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> Cc: Yi Li <yi1.li@intel.com>
> Cc: GuoX Xu <guox.xu@intel.com>
> Signed-off-by: Pethaiyan Madhan <madhan.pethaiyan@intel.com>
> ---
> MdePkg/Include/Protocol/FirmwareManagement.h | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/MdePkg/Include/Protocol/FirmwareManagement.h
> b/MdePkg/Include/Protocol/FirmwareManagement.h
> index e535bb697d..90b7d83c8f 100644
> --- a/MdePkg/Include/Protocol/FirmwareManagement.h
> +++ b/MdePkg/Include/Protocol/FirmwareManagement.h
> @@ -294,6 +294,8 @@ EFI_STATUS
> to contain the image(s)
> information if the buffer was too small.
> @param[in, out] ImageInfo A pointer to the buffer in which
> firmware places the current image(s)
> information. The information is
> an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
> + May be NULL with a zero
> ImageInfoSize in order to determine the size of the
> + buffer needed.
> @param[out] DescriptorVersion A pointer to the location in
> which firmware returns the version number
> associated with the
> EFI_FIRMWARE_IMAGE_DESCRIPTOR.
> @param[out] DescriptorCount A pointer to the location in
> which firmware returns the number of
> @@ -314,7 +316,12 @@ EFI_STATUS
> @retval EFI_SUCCESS The device was successfully
> updated with the new image.
> @retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too
> small. The current buffer size
> needed to hold the image(s)
> information is returned in ImageInfoSize.
> - @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is not too small
> and ImageInfo is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> DescriptorVersion is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> DescriptorCount is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> DescriptorSize is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> PackageVersion is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> PackageVersionName is NULL.
> @retval EFI_DEVICE_ERROR Valid information could not be
> returned. Possible corrupted image.
>
> **/
> @@ -341,6 +348,9 @@ EFI_STATUS
> @param[in] ImageIndex A unique number identifying the
> firmware image(s) within the device.
> The number is between 1 and
> DescriptorCount.
> @param[out] Image Points to the buffer where the
> current image is copied to.
> + May be NULL with a zero ImageSize in
> order to determine the size of the
> + buffer needed.
> +
> @param[in, out] ImageSize On entry, points to the size of the
> buffer pointed to by Image, in bytes.
> On return, points to the length of
> the image, in bytes.
>
> @@ -348,7 +358,7 @@ EFI_STATUS
> @retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is
> too small to hold the
> image. The current buffer size needed
> to hold the image is returned
> in ImageSize.
> - @retval EFI_INVALID_PARAMETER The Image was NULL.
> + @retval EFI_INVALID_PARAMETER The ImageSize is not too small and
> Image is NULL.
> @retval EFI_NOT_FOUND The current image is not copied to
> the buffer.
> @retval EFI_UNSUPPORTED The operation is not supported.
> @retval EFI_SECURITY_VIOLATION The operation could not be performed
> due to an authentication failure.
> --
> 2.38.1.windows.1
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#116562): https://edk2.groups.io/g/devel/message/116562
Mute This Topic: https://groups.io/mt/104819885/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details
2024-03-08 23:16 [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details Pethaiyan Madhan
2024-03-09 19:34 ` Michael D Kinney
@ 2024-03-09 20:17 ` Michael D Kinney
2024-03-14 8:16 ` Pethaiyan, Madhan
1 sibling, 1 reply; 8+ messages in thread
From: Michael D Kinney @ 2024-03-09 20:17 UTC (permalink / raw)
To: devel@edk2.groups.io, Pethaiyan, Madhan
Cc: Liming Gao, Liu, Zhiguang, Li, Yi1, GuoX Xu, Kinney, Michael D
Hi Madhan,
I created a PR with all 3 related patches to run through EDK II CI.
https://github.com/tianocore/edk2/pull/5453
There are CI failures. Please resolve and send updated patches.
Thanks,
Mike
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> Pethaiyan Madhan
> Sent: Friday, March 8, 2024 3:17 PM
> To: devel@edk2.groups.io
> Cc: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>; Liming Gao <gaoliming@byosoft.com.cn>;
> Liu, Zhiguang <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>;
> GuoX Xu <guox.xu@intel.com>
> Subject: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo
> description details
>
> 1.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():
> Add the following sentence at the end of the Image parameter
> description. "May be NULL with a zero ImageSize in order to determine
> the size of the buffer needed".
>
> Modify the description of "EFI_INVALID_PARAMETER" return code as "The
> ImageSize is not too small and Image is NULL."
>
> 2.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImageInfo():
> Add the following sentence at the end of the ImageInfo parameter
> description."May be NULL with a zero ImageInfoSize in order to
> determine the size of the buffer needed".
>
> Modify the description of "EFI_INVALID_PARAMETER" return code as "The
> ImageInfoSize is not too small and Image is NULL." and add new
> descriptions for "EFI_INVALID_PARAMETER" return code.
>
> REF: UEFI spec v2.10 23.1.2
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4660
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> Cc: Yi Li <yi1.li@intel.com>
> Cc: GuoX Xu <guox.xu@intel.com>
> Signed-off-by: Pethaiyan Madhan <madhan.pethaiyan@intel.com>
> ---
> MdePkg/Include/Protocol/FirmwareManagement.h | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/MdePkg/Include/Protocol/FirmwareManagement.h
> b/MdePkg/Include/Protocol/FirmwareManagement.h
> index e535bb697d..90b7d83c8f 100644
> --- a/MdePkg/Include/Protocol/FirmwareManagement.h
> +++ b/MdePkg/Include/Protocol/FirmwareManagement.h
> @@ -294,6 +294,8 @@ EFI_STATUS
> to contain the image(s)
> information if the buffer was too small.
> @param[in, out] ImageInfo A pointer to the buffer in which
> firmware places the current image(s)
> information. The information is
> an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
> + May be NULL with a zero
> ImageInfoSize in order to determine the size of the
> + buffer needed.
> @param[out] DescriptorVersion A pointer to the location in
> which firmware returns the version number
> associated with the
> EFI_FIRMWARE_IMAGE_DESCRIPTOR.
> @param[out] DescriptorCount A pointer to the location in
> which firmware returns the number of
> @@ -314,7 +316,12 @@ EFI_STATUS
> @retval EFI_SUCCESS The device was successfully
> updated with the new image.
> @retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too
> small. The current buffer size
> needed to hold the image(s)
> information is returned in ImageInfoSize.
> - @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is not too small
> and ImageInfo is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> DescriptorVersion is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> DescriptorCount is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> DescriptorSize is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> PackageVersion is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> PackageVersionName is NULL.
> @retval EFI_DEVICE_ERROR Valid information could not be
> returned. Possible corrupted image.
>
> **/
> @@ -341,6 +348,9 @@ EFI_STATUS
> @param[in] ImageIndex A unique number identifying the
> firmware image(s) within the device.
> The number is between 1 and
> DescriptorCount.
> @param[out] Image Points to the buffer where the
> current image is copied to.
> + May be NULL with a zero ImageSize in
> order to determine the size of the
> + buffer needed.
> +
> @param[in, out] ImageSize On entry, points to the size of the
> buffer pointed to by Image, in bytes.
> On return, points to the length of
> the image, in bytes.
>
> @@ -348,7 +358,7 @@ EFI_STATUS
> @retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is
> too small to hold the
> image. The current buffer size needed
> to hold the image is returned
> in ImageSize.
> - @retval EFI_INVALID_PARAMETER The Image was NULL.
> + @retval EFI_INVALID_PARAMETER The ImageSize is not too small and
> Image is NULL.
> @retval EFI_NOT_FOUND The current image is not copied to
> the buffer.
> @retval EFI_UNSUPPORTED The operation is not supported.
> @retval EFI_SECURITY_VIOLATION The operation could not be performed
> due to an authentication failure.
> --
> 2.38.1.windows.1
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#116563): https://edk2.groups.io/g/devel/message/116563
Mute This Topic: https://groups.io/mt/104819885/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details
2024-03-09 20:17 ` Michael D Kinney
@ 2024-03-14 8:16 ` Pethaiyan, Madhan
2024-03-26 5:51 ` Pethaiyan, Madhan
2024-03-28 1:10 ` 回复: " gaoliming via groups.io
0 siblings, 2 replies; 8+ messages in thread
From: Pethaiyan, Madhan @ 2024-03-14 8:16 UTC (permalink / raw)
To: Kinney, Michael D, devel@edk2.groups.io
Cc: Liming Gao, Liu, Zhiguang, Li, Yi1, GuoX Xu
[-- Attachment #1: Type: text/plain, Size: 6806 bytes --]
Hi Mike ,
I had raised new code review addressing the coding standard errors and those were not part of my change any way ..
Thanks,
P. Madhan
-----Original Message-----
From: Kinney, Michael D <michael.d.kinney@intel.com>
Sent: Sunday, March 10, 2024 1:47 AM
To: devel@edk2.groups.io; Pethaiyan, Madhan <madhan.pethaiyan@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>; Liu, Zhiguang <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; GuoX Xu <guox.xu@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>
Subject: RE: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details
Hi Madhan,
I created a PR with all 3 related patches to run through EDK II CI.
https://github.com/tianocore/edk2/pull/5453
There are CI failures. Please resolve and send updated patches.
Thanks,
Mike
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> Pethaiyan Madhan
> Sent: Friday, March 8, 2024 3:17 PM
> To: devel@edk2.groups.io
> Cc: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>; Liming Gao <gaoliming@byosoft.com.cn>;
> Liu, Zhiguang <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>;
> GuoX Xu <guox.xu@intel.com>
> Subject: [edk2-devel] [PATCH V1] MdePkg: Update GetImage ,
> GetImageInfo description details
>
> 1.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():
> Add the following sentence at the end of the Image parameter
> description. "May be NULL with a zero ImageSize in order to determine
> the size of the buffer needed".
>
> Modify the description of "EFI_INVALID_PARAMETER" return code as "The
> ImageSize is not too small and Image is NULL."
>
> 2.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImageInfo():
> Add the following sentence at the end of the ImageInfo parameter
> description."May be NULL with a zero ImageInfoSize in order to
> determine the size of the buffer needed".
>
> Modify the description of "EFI_INVALID_PARAMETER" return code as "The
> ImageInfoSize is not too small and Image is NULL." and add new
> descriptions for "EFI_INVALID_PARAMETER" return code.
>
> REF: UEFI spec v2.10 23.1.2
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4660
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> Cc: Yi Li <yi1.li@intel.com>
> Cc: GuoX Xu <guox.xu@intel.com>
> Signed-off-by: Pethaiyan Madhan <madhan.pethaiyan@intel.com>
> ---
> MdePkg/Include/Protocol/FirmwareManagement.h | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/MdePkg/Include/Protocol/FirmwareManagement.h
> b/MdePkg/Include/Protocol/FirmwareManagement.h
> index e535bb697d..90b7d83c8f 100644
> --- a/MdePkg/Include/Protocol/FirmwareManagement.h
> +++ b/MdePkg/Include/Protocol/FirmwareManagement.h
> @@ -294,6 +294,8 @@ EFI_STATUS
> to contain the image(s)
> information if the buffer was too small.
> @param[in, out] ImageInfo A pointer to the buffer in which
> firmware places the current image(s)
> information. The information is
> an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
> + May be NULL with a zero
> ImageInfoSize in order to determine the size of the
> + buffer needed.
> @param[out] DescriptorVersion A pointer to the location in
> which firmware returns the version number
> associated with the
> EFI_FIRMWARE_IMAGE_DESCRIPTOR.
> @param[out] DescriptorCount A pointer to the location in
> which firmware returns the number of
> @@ -314,7 +316,12 @@ EFI_STATUS
> @retval EFI_SUCCESS The device was successfully
> updated with the new image.
> @retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too
> small. The current buffer size
> needed to hold the image(s)
> information is returned in ImageInfoSize.
> - @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is not too small
> and ImageInfo is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> DescriptorVersion is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> DescriptorCount is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> DescriptorSize is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> PackageVersion is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> PackageVersionName is NULL.
> @retval EFI_DEVICE_ERROR Valid information could not be
> returned. Possible corrupted image.
>
> **/
> @@ -341,6 +348,9 @@ EFI_STATUS
> @param[in] ImageIndex A unique number identifying the
> firmware image(s) within the device.
> The number is between 1 and
> DescriptorCount.
> @param[out] Image Points to the buffer where the
> current image is copied to.
> + May be NULL with a zero ImageSize in
> order to determine the size of the
> + buffer needed.
> +
> @param[in, out] ImageSize On entry, points to the size of the
> buffer pointed to by Image, in bytes.
> On return, points to the length of
> the image, in bytes.
>
> @@ -348,7 +358,7 @@ EFI_STATUS
> @retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is
> too small to hold the
> image. The current buffer size
> needed to hold the image is returned
> in ImageSize.
> - @retval EFI_INVALID_PARAMETER The Image was NULL.
> + @retval EFI_INVALID_PARAMETER The ImageSize is not too small and
> Image is NULL.
> @retval EFI_NOT_FOUND The current image is not copied to
> the buffer.
> @retval EFI_UNSUPPORTED The operation is not supported.
> @retval EFI_SECURITY_VIOLATION The operation could not be performed
> due to an authentication failure.
> --
> 2.38.1.windows.1
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#116855): https://edk2.groups.io/g/devel/message/116855
Mute This Topic: https://groups.io/mt/104819885/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
[-- Attachment #2: Type: message/rfc822, Size: 15060 bytes --]
From: "Pethaiyan, Madhan" <madhan.pethaiyan@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Pethaiyan, Madhan" <madhan.pethaiyan@intel.com>, "Kinney, Michael D" <michael.d.kinney@intel.com>, Liming Gao <gaoliming@byosoft.com.cn>, "Liu, Zhiguang" <zhiguang.liu@intel.com>, "Li, Yi1" <yi1.li@intel.com>, GuoX Xu <guox.xu@intel.com>
Subject: [PATCH V1 3/3] SignedCapsulePkg: Update GetImage and GetImageInfo description details
Date: Thu, 14 Mar 2024 08:11:33 +0000
Message-ID: <20240314081133.1134-3-madhan.pethaiyan@intel.com>
1.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():
Add the following sentence at the end of the Image parameter
description. "May be NULL with a zero ImageSize in order to determine
the size of the buffer needed".
Modify the description of "EFI_INVALID_PARAMETER" return code as "The
ImageSize is not too small and Image is NULL."
2.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImageInfo():
Add the following sentence at the end of the ImageInfo parameter
description."May be NULL with a zero ImageInfoSize in order to
determine the size of the buffer needed".
Modify the description of "EFI_INVALID_PARAMETER" return code as "The
ImageInfoSize is not too small and Image is NULL." and add new
descriptions for "EFI_INVALID_PARAMETER" return code.
REF: UEFI spec v2.10 23.1.2
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4660
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Yi Li <yi1.li@intel.com>
Cc: GuoX Xu <guox.xu@intel.com>
Signed-off-by: Pethaiyan Madhan <madhan.pethaiyan@intel.com>
---
.../SystemFirmwareUpdate/SystemFirmwareCommonDxe.c | 13 +++++++++++--
.../SystemFirmwareUpdate/SystemFirmwareDxe.h | 13 +++++++++++--
2 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareCommonDxe.c b/SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareCommonDxe.c
index 077bd0cb31..6e394d85d4 100644
--- a/SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareCommonDxe.c
+++ b/SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareCommonDxe.c
@@ -34,6 +34,8 @@ EFI_FIRMWARE_MANAGEMENT_PROTOCOL mFirmwareManagementProtocol = {
to contain the image(s) information if the buffer was too small.
@param[in, out] ImageInfo A pointer to the buffer in which firmware places the current image(s)
information. The information is an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
+ May be NULL with a zero ImageInfoSize in order to determine the size of the
+ buffer needed.
@param[out] DescriptorVersion A pointer to the location in which firmware returns the version number
associated with the EFI_FIRMWARE_IMAGE_DESCRIPTOR.
@param[out] DescriptorCount A pointer to the location in which firmware returns the number of
@@ -54,7 +56,12 @@ EFI_FIRMWARE_MANAGEMENT_PROTOCOL mFirmwareManagementProtocol = {
@retval EFI_SUCCESS The device was successfully updated with the new image.
@retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too small. The current buffer size
needed to hold the image(s) information is returned in ImageInfoSize.
- @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is not too small and ImageInfo is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorVersion is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorCount is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorSize is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and PackageVersion is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and PackageVersionName is NULL.
@retval EFI_DEVICE_ERROR Valid information could not be returned. Possible corrupted image.
**/
@@ -153,6 +160,8 @@ FmpGetImageInfo (
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device.
The number is between 1 and DescriptorCount.
@param[in,out] Image Points to the buffer where the current image is copied to.
+ May be NULL with a zero ImageSize in order to determine the size of the
+ buffer needed.
@param[in,out] ImageSize On entry, points to the size of the buffer pointed to by Image, in bytes.
On return, points to the length of the image, in bytes.
@@ -160,7 +169,7 @@ FmpGetImageInfo (
@retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to hold the
image. The current buffer size needed to hold the image is returned
in ImageSize.
- @retval EFI_INVALID_PARAMETER The Image was NULL.
+ @retval EFI_INVALID_PARAMETER The ImageSize is not too small and Image is NULL
@retval EFI_NOT_FOUND The current image is not copied to the buffer.
@retval EFI_UNSUPPORTED The operation is not supported.
@retval EFI_SECURITY_VIOLATION The operation could not be performed due to an authentication failure.
diff --git a/SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareDxe.h b/SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareDxe.h
index c8443865cb..b2b2c78318 100644
--- a/SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareDxe.h
+++ b/SignedCapsulePkg/Universal/SystemFirmwareUpdate/SystemFirmwareDxe.h
@@ -137,6 +137,8 @@ typedef struct {
to contain the image(s) information if the buffer was too small.
@param[in, out] ImageInfo A pointer to the buffer in which firmware places the current image(s)
information. The information is an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
+ May be NULL with a zero ImageInfoSize in order to determine the size of the
+ buffer needed.
@param[out] DescriptorVersion A pointer to the location in which firmware returns the version number
associated with the EFI_FIRMWARE_IMAGE_DESCRIPTOR.
@param[out] DescriptorCount A pointer to the location in which firmware returns the number of
@@ -157,7 +159,12 @@ typedef struct {
@retval EFI_SUCCESS The device was successfully updated with the new image.
@retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too small. The current buffer size
needed to hold the image(s) information is returned in ImageInfoSize.
- @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is not too small and ImageInfo is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorVersion is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorCount is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorSize is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and PackageVersion is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and PackageVersionName is NULL.
@retval EFI_DEVICE_ERROR Valid information could not be returned. Possible corrupted image.
**/
@@ -184,6 +191,8 @@ FmpGetImageInfo (
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device.
The number is between 1 and DescriptorCount.
@param[in,out] Image Points to the buffer where the current image is copied to.
+ May be NULL with a zero ImageSize in order to determine the size of the
+ buffer needed.
@param[in,out] ImageSize On entry, points to the size of the buffer pointed to by Image, in bytes.
On return, points to the length of the image, in bytes.
@@ -191,7 +200,7 @@ FmpGetImageInfo (
@retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to hold the
image. The current buffer size needed to hold the image is returned
in ImageSize.
- @retval EFI_INVALID_PARAMETER The Image was NULL.
+ @retval EFI_INVALID_PARAMETER The ImageSize is not too small and Image is NULL
@retval EFI_NOT_FOUND The current image is not copied to the buffer.
@retval EFI_UNSUPPORTED The operation is not supported.
@retval EFI_SECURITY_VIOLATION The operation could not be performed due to an authentication failure.
--
2.38.1.windows.1
[-- Attachment #3: Type: message/rfc822, Size: 11079 bytes --]
From: "Pethaiyan, Madhan" <madhan.pethaiyan@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Pethaiyan, Madhan" <madhan.pethaiyan@intel.com>, "Kinney, Michael D" <michael.d.kinney@intel.com>, Liming Gao <gaoliming@byosoft.com.cn>, "Liu, Zhiguang" <zhiguang.liu@intel.com>, "Li, Yi1" <yi1.li@intel.com>, GuoX Xu <guox.xu@intel.com>
Subject: [PATCH V1 2/3] MdePkg: Update GetImage , GetImageInfo description details
Date: Thu, 14 Mar 2024 08:11:32 +0000
Message-ID: <20240314081133.1134-2-madhan.pethaiyan@intel.com>
1.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():
Add the following sentence at the end of the Image parameter
description. "May be NULL with a zero ImageSize in order to determine
the size of the buffer needed".
Modify the description of "EFI_INVALID_PARAMETER" return code as "The
ImageSize is not too small and Image is NULL."
2.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImageInfo():
Add the following sentence at the end of the ImageInfo parameter
description."May be NULL with a zero ImageInfoSize in order to
determine the size of the buffer needed".
Modify the description of "EFI_INVALID_PARAMETER" return code as "The
ImageInfoSize is not too small and Image is NULL." and add new
descriptions for "EFI_INVALID_PARAMETER" return code.
REF: UEFI spec v2.10 23.1.2
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4660
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Yi Li <yi1.li@intel.com>
Cc: GuoX Xu <guox.xu@intel.com>
Signed-off-by: Pethaiyan Madhan <madhan.pethaiyan@intel.com>
---
MdePkg/Include/Protocol/FirmwareManagement.h | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/MdePkg/Include/Protocol/FirmwareManagement.h b/MdePkg/Include/Protocol/FirmwareManagement.h
index e535bb697d..90b7d83c8f 100644
--- a/MdePkg/Include/Protocol/FirmwareManagement.h
+++ b/MdePkg/Include/Protocol/FirmwareManagement.h
@@ -294,6 +294,8 @@ EFI_STATUS
to contain the image(s) information if the buffer was too small.
@param[in, out] ImageInfo A pointer to the buffer in which firmware places the current image(s)
information. The information is an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
+ May be NULL with a zero ImageInfoSize in order to determine the size of the
+ buffer needed.
@param[out] DescriptorVersion A pointer to the location in which firmware returns the version number
associated with the EFI_FIRMWARE_IMAGE_DESCRIPTOR.
@param[out] DescriptorCount A pointer to the location in which firmware returns the number of
@@ -314,7 +316,12 @@ EFI_STATUS
@retval EFI_SUCCESS The device was successfully updated with the new image.
@retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too small. The current buffer size
needed to hold the image(s) information is returned in ImageInfoSize.
- @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is not too small and ImageInfo is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorVersion is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorCount is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorSize is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and PackageVersion is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and PackageVersionName is NULL.
@retval EFI_DEVICE_ERROR Valid information could not be returned. Possible corrupted image.
**/
@@ -341,6 +348,9 @@ EFI_STATUS
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device.
The number is between 1 and DescriptorCount.
@param[out] Image Points to the buffer where the current image is copied to.
+ May be NULL with a zero ImageSize in order to determine the size of the
+ buffer needed.
+
@param[in, out] ImageSize On entry, points to the size of the buffer pointed to by Image, in bytes.
On return, points to the length of the image, in bytes.
@@ -348,7 +358,7 @@ EFI_STATUS
@retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to hold the
image. The current buffer size needed to hold the image is returned
in ImageSize.
- @retval EFI_INVALID_PARAMETER The Image was NULL.
+ @retval EFI_INVALID_PARAMETER The ImageSize is not too small and Image is NULL.
@retval EFI_NOT_FOUND The current image is not copied to the buffer.
@retval EFI_UNSUPPORTED The operation is not supported.
@retval EFI_SECURITY_VIOLATION The operation could not be performed due to an authentication failure.
--
2.38.1.windows.1
[-- Attachment #4: Type: message/rfc822, Size: 17458 bytes --]
From: "Pethaiyan, Madhan" <madhan.pethaiyan@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Pethaiyan, Madhan" <madhan.pethaiyan@intel.com>, "Kinney, Michael D" <michael.d.kinney@intel.com>, Liming Gao <gaoliming@byosoft.com.cn>, "Liu, Zhiguang" <zhiguang.liu@intel.com>, "Li, Yi1" <yi1.li@intel.com>, GuoX Xu <guox.xu@intel.com>
Subject: [PATCH V1 1/3] FmpDevicePkg: GetImageInfo Add missing conditions
Date: Thu, 14 Mar 2024 08:11:31 +0000
Message-ID: <20240314081133.1134-1-madhan.pethaiyan@intel.com>
1.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():
Add the following sentence at the end of the Image parameter
description. "May be NULL with a zero ImageSize in order to determine
the size of the buffer needed".
Modify the description of "EFI_INVALID_PARAMETER" return code as "The
ImageSize is not too small and Image is NULL."
2.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImageInfo():
Add the following sentence at the end of the ImageInfo parameter
description."May be NULL with a zero ImageInfoSize in order to
determine the size of the buffer needed".
Modify the description of "EFI_INVALID_PARAMETER" return code as "The
ImageInfoSize is not too small and Image is NULL." and add new
descriptions for "EFI_INVALID_PARAMETER" return code.
REF: UEFI spec v2.10 23.1.2
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4660
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Yi Li <yi1.li@intel.com>
Cc: GuoX Xu <guox.xu@intel.com>
Signed-off-by: Pethaiyan Madhan <madhan.pethaiyan@intel.com>
---
FmpDevicePkg/FmpDxe/FmpDxe.c | 52 +++++++++++++++++++++---------------
FmpDevicePkg/FmpDxe/FmpDxe.h | 15 ++++++++---
2 files changed, 43 insertions(+), 24 deletions(-)
diff --git a/FmpDevicePkg/FmpDxe/FmpDxe.c b/FmpDevicePkg/FmpDxe/FmpDxe.c
index 1e7ec4a09e..4111b7cb8e 100644
--- a/FmpDevicePkg/FmpDxe/FmpDxe.c
+++ b/FmpDevicePkg/FmpDxe/FmpDxe.c
@@ -43,20 +43,20 @@ const FIRMWARE_MANAGEMENT_PRIVATE_DATA mFirmwareManagementPrivateDataTemplate =
FIRMWARE_MANAGEMENT_PRIVATE_DATA_SIGNATURE, // Signature
NULL, // Handle
{ // Fmp
- GetTheImageInfo,
+ GetImageInfo,
GetTheImage,
SetTheImage,
CheckTheImage,
GetPackageInfo,
SetPackageInfo
},
- FALSE, // DescriptorPopulated
- { // Desc
- 1, // ImageIndex
+ FALSE, // DescriptorPopulated
+ { // Desc
+ 1, // ImageIndex
//
// ImageTypeId
//
- { 0x00000000, 0x0000,0x0000, { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
+ { 0x00000000, 0x0000,0x0000, { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
},
1, // ImageId
NULL, // ImageIdName
@@ -71,18 +71,18 @@ const FIRMWARE_MANAGEMENT_PRIVATE_DATA mFirmwareManagementPrivateDataTemplate =
0, // LastAttemptStatus
0 // HardwareInstance
},
- NULL, // ImageIdName
- NULL, // VersionName
- TRUE, // RuntimeVersionSupported
- NULL, // FmpDeviceLockEvent
- FALSE, // FmpDeviceLocked
- NULL, // FmpDeviceContext
- NULL, // VersionVariableName
- NULL, // LsvVariableName
- NULL, // LastAttemptStatusVariableName
- NULL, // LastAttemptVersionVariableName
- NULL, // FmpStateVariableName
- TRUE // DependenciesSatisfied
+ NULL, // ImageIdName
+ NULL, // VersionName
+ TRUE, // RuntimeVersionSupported
+ NULL, // FmpDeviceLockEvent
+ FALSE, // FmpDeviceLocked
+ NULL, // FmpDeviceContext
+ NULL, // VersionVariableName
+ NULL, // LsvVariableName
+ NULL, // LastAttemptStatusVariableName
+ NULL, // LastAttemptVersionVariableName
+ NULL, // FmpStateVariableName
+ TRUE // DependenciesSatisfied
};
///
@@ -417,6 +417,8 @@ PopulateDescriptor (
to contain the image(s) information if the buffer was too small.
@param[in, out] ImageInfo A pointer to the buffer in which firmware places the current image(s)
information. The information is an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
+ May be NULL with a zero ImageInfoSize in order to determine the size of the
+ buffer needed.
@param[out] DescriptorVersion A pointer to the location in which firmware returns the version number
associated with the EFI_FIRMWARE_IMAGE_DESCRIPTOR.
@param[out] DescriptorCount A pointer to the location in which firmware returns the number of
@@ -437,13 +439,18 @@ PopulateDescriptor (
@retval EFI_SUCCESS The device was successfully updated with the new image.
@retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too small. The current buffer size
needed to hold the image(s) information is returned in ImageInfoSize.
- @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is not too small and ImageInfo is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorVersion is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorCount is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorSize is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and PackageVersion is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and PackageVersionName is NULL.
@retval EFI_DEVICE_ERROR Valid information could not be returned. Possible corrupted image.
**/
EFI_STATUS
EFIAPI
-GetTheImageInfo (
+GetImageInfo (
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
IN OUT UINTN *ImageInfoSize,
IN OUT EFI_FIRMWARE_IMAGE_DESCRIPTOR *ImageInfo,
@@ -495,7 +502,7 @@ GetTheImageInfo (
// Confirm that buffer isn't null
//
if ( (ImageInfo == NULL) || (DescriptorVersion == NULL) || (DescriptorCount == NULL) || (DescriptorSize == NULL)
- || (PackageVersion == NULL))
+ || (PackageVersion == NULL) || (PackageVersionName == NULL))
{
DEBUG ((DEBUG_ERROR, "FmpDxe(%s): GetImageInfo() - Pointer Parameter is NULL.\n", mImageIdName));
Status = EFI_INVALID_PARAMETER;
@@ -544,6 +551,9 @@ cleanup:
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device.
The number is between 1 and DescriptorCount.
@param[in, out] Image Points to the buffer where the current image is copied to.
+ May be NULL with a zero ImageSize in order to determine the size of the
+ buffer needed.
+
@param[in, out] ImageSize On entry, points to the size of the buffer pointed to by Image, in bytes.
On return, points to the length of the image, in bytes.
@@ -551,7 +561,7 @@ cleanup:
@retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to hold the
image. The current buffer size needed to hold the image is returned
in ImageSize.
- @retval EFI_INVALID_PARAMETER The Image was NULL.
+ @retval EFI_INVALID_PARAMETER The ImageSize is not too small and Image is NULL
@retval EFI_NOT_FOUND The current image is not copied to the buffer.
@retval EFI_UNSUPPORTED The operation is not supported.
@retval EFI_SECURITY_VIOLATION The operation could not be performed due to an authentication failure.
diff --git a/FmpDevicePkg/FmpDxe/FmpDxe.h b/FmpDevicePkg/FmpDxe/FmpDxe.h
index 7baf730e69..d2ade143bd 100644
--- a/FmpDevicePkg/FmpDxe/FmpDxe.h
+++ b/FmpDevicePkg/FmpDxe/FmpDxe.h
@@ -114,6 +114,8 @@ DetectTestKey (
to contain the image(s) information if the buffer was too small.
@param[in, out] ImageInfo A pointer to the buffer in which firmware places the current image(s)
information. The information is an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
+ May be NULL with a zero ImageInfoSize in order to determine the size of the
+ buffer needed.
@param[out] DescriptorVersion A pointer to the location in which firmware returns the version number
associated with the EFI_FIRMWARE_IMAGE_DESCRIPTOR.
@param[out] DescriptorCount A pointer to the location in which firmware returns the number of
@@ -134,13 +136,18 @@ DetectTestKey (
@retval EFI_SUCCESS The device was successfully updated with the new image.
@retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too small. The current buffer size
needed to hold the image(s) information is returned in ImageInfoSize.
- @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is not too small and ImageInfo is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorVersion is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorCount is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and DescriptorSize is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and PackageVersion is NULL.
+ @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and PackageVersionName is NULL.
@retval EFI_DEVICE_ERROR Valid information could not be returned. Possible corrupted image.
**/
EFI_STATUS
EFIAPI
-GetTheImageInfo (
+GetImageInfo (
IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,
IN OUT UINTN *ImageInfoSize,
IN OUT EFI_FIRMWARE_IMAGE_DESCRIPTOR *ImageInfo,
@@ -161,6 +168,8 @@ GetTheImageInfo (
@param[in] ImageIndex A unique number identifying the firmware image(s) within the device.
The number is between 1 and DescriptorCount.
@param[in, out] Image Points to the buffer where the current image is copied to.
+ May be NULL with a zero ImageSize in order to determine the size of the
+ buffer needed.
@param[in, out] ImageSize On entry, points to the size of the buffer pointed to by Image, in bytes.
On return, points to the length of the image, in bytes.
@@ -168,7 +177,7 @@ GetTheImageInfo (
@retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to hold the
image. The current buffer size needed to hold the image is returned
in ImageSize.
- @retval EFI_INVALID_PARAMETER The Image was NULL.
+ @retval EFI_INVALID_PARAMETER The ImageSize is not too small and Image is NULL
@retval EFI_NOT_FOUND The current image is not copied to the buffer.
@retval EFI_UNSUPPORTED The operation is not supported.
@retval EFI_SECURITY_VIOLATION The operation could not be performed due to an authentication failure.
--
2.38.1.windows.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details
2024-03-14 8:16 ` Pethaiyan, Madhan
@ 2024-03-26 5:51 ` Pethaiyan, Madhan
2024-03-28 1:10 ` 回复: " gaoliming via groups.io
1 sibling, 0 replies; 8+ messages in thread
From: Pethaiyan, Madhan @ 2024-03-26 5:51 UTC (permalink / raw)
To: Kinney, Michael D, devel@edk2.groups.io
Cc: Liming Gao, Liu, Zhiguang, Li, Yi1, GuoX Xu
Hi All ,
Remider , request to review and provide feedback ,
Thanks,
P. Madhan
-----Original Message-----
From: Pethaiyan, Madhan
Sent: Thursday, March 14, 2024 1:47 PM
To: Kinney, Michael D <michael.d.kinney@intel.com>; devel@edk2.groups.io
Cc: Liming Gao <gaoliming@byosoft.com.cn>; Liu, Zhiguang <Zhiguang.Liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; GuoX Xu <guox.xu@intel.com>
Subject: RE: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details
Hi Mike ,
I had raised new code review addressing the coding standard errors and those were not part of my change any way ..
Thanks,
P. Madhan
-----Original Message-----
From: Kinney, Michael D <michael.d.kinney@intel.com>
Sent: Sunday, March 10, 2024 1:47 AM
To: devel@edk2.groups.io; Pethaiyan, Madhan <madhan.pethaiyan@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>; Liu, Zhiguang <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; GuoX Xu <guox.xu@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>
Subject: RE: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details
Hi Madhan,
I created a PR with all 3 related patches to run through EDK II CI.
https://github.com/tianocore/edk2/pull/5453
There are CI failures. Please resolve and send updated patches.
Thanks,
Mike
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> Pethaiyan Madhan
> Sent: Friday, March 8, 2024 3:17 PM
> To: devel@edk2.groups.io
> Cc: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>; Liming Gao <gaoliming@byosoft.com.cn>;
> Liu, Zhiguang <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>;
> GuoX Xu <guox.xu@intel.com>
> Subject: [edk2-devel] [PATCH V1] MdePkg: Update GetImage ,
> GetImageInfo description details
>
> 1.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():
> Add the following sentence at the end of the Image parameter
> description. "May be NULL with a zero ImageSize in order to determine
> the size of the buffer needed".
>
> Modify the description of "EFI_INVALID_PARAMETER" return code as "The
> ImageSize is not too small and Image is NULL."
>
> 2.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImageInfo():
> Add the following sentence at the end of the ImageInfo parameter
> description."May be NULL with a zero ImageInfoSize in order to
> determine the size of the buffer needed".
>
> Modify the description of "EFI_INVALID_PARAMETER" return code as "The
> ImageInfoSize is not too small and Image is NULL." and add new
> descriptions for "EFI_INVALID_PARAMETER" return code.
>
> REF: UEFI spec v2.10 23.1.2
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4660
>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> Cc: Yi Li <yi1.li@intel.com>
> Cc: GuoX Xu <guox.xu@intel.com>
> Signed-off-by: Pethaiyan Madhan <madhan.pethaiyan@intel.com>
> ---
> MdePkg/Include/Protocol/FirmwareManagement.h | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/MdePkg/Include/Protocol/FirmwareManagement.h
> b/MdePkg/Include/Protocol/FirmwareManagement.h
> index e535bb697d..90b7d83c8f 100644
> --- a/MdePkg/Include/Protocol/FirmwareManagement.h
> +++ b/MdePkg/Include/Protocol/FirmwareManagement.h
> @@ -294,6 +294,8 @@ EFI_STATUS
> to contain the image(s)
> information if the buffer was too small.
> @param[in, out] ImageInfo A pointer to the buffer in which
> firmware places the current image(s)
> information. The information is
> an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
> + May be NULL with a zero
> ImageInfoSize in order to determine the size of the
> + buffer needed.
> @param[out] DescriptorVersion A pointer to the location in
> which firmware returns the version number
> associated with the
> EFI_FIRMWARE_IMAGE_DESCRIPTOR.
> @param[out] DescriptorCount A pointer to the location in
> which firmware returns the number of
> @@ -314,7 +316,12 @@ EFI_STATUS
> @retval EFI_SUCCESS The device was successfully
> updated with the new image.
> @retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too
> small. The current buffer size
> needed to hold the image(s)
> information is returned in ImageInfoSize.
> - @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is not too small
> and ImageInfo is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> DescriptorVersion is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> DescriptorCount is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> DescriptorSize is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> PackageVersion is NULL.
> + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> PackageVersionName is NULL.
> @retval EFI_DEVICE_ERROR Valid information could not be
> returned. Possible corrupted image.
>
> **/
> @@ -341,6 +348,9 @@ EFI_STATUS
> @param[in] ImageIndex A unique number identifying the
> firmware image(s) within the device.
> The number is between 1 and
> DescriptorCount.
> @param[out] Image Points to the buffer where the
> current image is copied to.
> + May be NULL with a zero ImageSize in
> order to determine the size of the
> + buffer needed.
> +
> @param[in, out] ImageSize On entry, points to the size of the
> buffer pointed to by Image, in bytes.
> On return, points to the length of
> the image, in bytes.
>
> @@ -348,7 +358,7 @@ EFI_STATUS
> @retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is
> too small to hold the
> image. The current buffer size
> needed to hold the image is returned
> in ImageSize.
> - @retval EFI_INVALID_PARAMETER The Image was NULL.
> + @retval EFI_INVALID_PARAMETER The ImageSize is not too small and
> Image is NULL.
> @retval EFI_NOT_FOUND The current image is not copied to
> the buffer.
> @retval EFI_UNSUPPORTED The operation is not supported.
> @retval EFI_SECURITY_VIOLATION The operation could not be performed
> due to an authentication failure.
> --
> 2.38.1.windows.1
>
>
>
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#117135): https://edk2.groups.io/g/devel/message/117135
Mute This Topic: https://groups.io/mt/104819885/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 8+ messages in thread
* 回复: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details
2024-03-14 8:16 ` Pethaiyan, Madhan
2024-03-26 5:51 ` Pethaiyan, Madhan
@ 2024-03-28 1:10 ` gaoliming via groups.io
2024-05-13 12:09 ` Pethaiyan, Madhan
1 sibling, 1 reply; 8+ messages in thread
From: gaoliming via groups.io @ 2024-03-28 1:10 UTC (permalink / raw)
To: 'Pethaiyan, Madhan', 'Kinney, Michael D', devel
Cc: 'Liu, Zhiguang', 'Li, Yi1', 'GuoX Xu'
Madhan:
I have no comments for this patch set. Reviewed-by: Liming Gao
<gaoliming@byosoft.com.cn>
Have you create Edk2 PR to verify the changes?
Thanks
Liming
> -----邮件原件-----
> 发件人: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>
> 发送时间: 2024年3月14日 16:17
> 收件人: Kinney, Michael D <michael.d.kinney@intel.com>;
> devel@edk2.groups.io
> 抄送: Liming Gao <gaoliming@byosoft.com.cn>; Liu, Zhiguang
> <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; GuoX Xu
> <guox.xu@intel.com>
> 主题: RE: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo
> description details
>
> Hi Mike ,
>
> I had raised new code review addressing the coding standard errors and
those
> were not part of my change any way ..
>
> Thanks,
> P. Madhan
>
> -----Original Message-----
> From: Kinney, Michael D <michael.d.kinney@intel.com>
> Sent: Sunday, March 10, 2024 1:47 AM
> To: devel@edk2.groups.io; Pethaiyan, Madhan
> <madhan.pethaiyan@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>; Liu, Zhiguang
> <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; GuoX Xu
> <guox.xu@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>
> Subject: RE: [edk2-devel] [PATCH V1] MdePkg: Update GetImage ,
> GetImageInfo description details
>
> Hi Madhan,
>
> I created a PR with all 3 related patches to run through EDK II CI.
>
> https://github.com/tianocore/edk2/pull/5453
>
> There are CI failures. Please resolve and send updated patches.
>
> Thanks,
>
> Mike
>
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > Pethaiyan Madhan
> > Sent: Friday, March 8, 2024 3:17 PM
> > To: devel@edk2.groups.io
> > Cc: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>; Kinney, Michael D
> > <michael.d.kinney@intel.com>; Liming Gao <gaoliming@byosoft.com.cn>;
> > Liu, Zhiguang <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>;
> > GuoX Xu <guox.xu@intel.com>
> > Subject: [edk2-devel] [PATCH V1] MdePkg: Update GetImage ,
> > GetImageInfo description details
> >
> > 1.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():
> > Add the following sentence at the end of the Image parameter
> > description. "May be NULL with a zero ImageSize in order to determine
> > the size of the buffer needed".
> >
> > Modify the description of "EFI_INVALID_PARAMETER" return code as "The
> > ImageSize is not too small and Image is NULL."
> >
> > 2.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImageInfo():
> > Add the following sentence at the end of the ImageInfo parameter
> > description."May be NULL with a zero ImageInfoSize in order to
> > determine the size of the buffer needed".
> >
> > Modify the description of "EFI_INVALID_PARAMETER" return code as "The
> > ImageInfoSize is not too small and Image is NULL." and add new
> > descriptions for "EFI_INVALID_PARAMETER" return code.
> >
> > REF: UEFI spec v2.10 23.1.2
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4660
> >
> > Cc: Michael D Kinney <michael.d.kinney@intel.com>
> > Cc: Liming Gao <gaoliming@byosoft.com.cn>
> > Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> > Cc: Yi Li <yi1.li@intel.com>
> > Cc: GuoX Xu <guox.xu@intel.com>
> > Signed-off-by: Pethaiyan Madhan <madhan.pethaiyan@intel.com>
> > ---
> > MdePkg/Include/Protocol/FirmwareManagement.h | 14 ++++++++++++--
> > 1 file changed, 12 insertions(+), 2 deletions(-)
> >
> > diff --git a/MdePkg/Include/Protocol/FirmwareManagement.h
> > b/MdePkg/Include/Protocol/FirmwareManagement.h
> > index e535bb697d..90b7d83c8f 100644
> > --- a/MdePkg/Include/Protocol/FirmwareManagement.h
> > +++ b/MdePkg/Include/Protocol/FirmwareManagement.h
> > @@ -294,6 +294,8 @@ EFI_STATUS
> > to contain the image(s)
> > information if the buffer was too small.
> > @param[in, out] ImageInfo A pointer to the buffer in which
> > firmware places the current image(s)
> > information. The
> information is
> > an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
> > + May be NULL with a zero
> > ImageInfoSize in order to determine the size of the
> > + buffer needed.
> > @param[out] DescriptorVersion A pointer to the location in
> > which firmware returns the version number
> > associated with the
> > EFI_FIRMWARE_IMAGE_DESCRIPTOR.
> > @param[out] DescriptorCount A pointer to the location in
> > which firmware returns the number of
> > @@ -314,7 +316,12 @@ EFI_STATUS
> > @retval EFI_SUCCESS The device was successfully
> > updated with the new image.
> > @retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was
> too
> > small. The current buffer size
> > needed to hold the image(s)
> > information is returned in ImageInfoSize.
> > - @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
> > + @retval EFI_INVALID_PARAMETER ImageInfoSize is not too small
> > and ImageInfo is NULL.
> > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > DescriptorVersion is NULL.
> > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > DescriptorCount is NULL.
> > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > DescriptorSize is NULL.
> > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > PackageVersion is NULL.
> > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > PackageVersionName is NULL.
> > @retval EFI_DEVICE_ERROR Valid information could not
> be
> > returned. Possible corrupted image.
> >
> > **/
> > @@ -341,6 +348,9 @@ EFI_STATUS
> > @param[in] ImageIndex A unique number identifying the
> > firmware image(s) within the device.
> > The number is between 1 and
> > DescriptorCount.
> > @param[out] Image Points to the buffer where the
> > current image is copied to.
> > + May be NULL with a zero
> ImageSize in
> > order to determine the size of the
> > + buffer needed.
> > +
> > @param[in, out] ImageSize On entry, points to the size of the
> > buffer pointed to by Image, in bytes.
> > On return, points to the length of
> > the image, in bytes.
> >
> > @@ -348,7 +358,7 @@ EFI_STATUS
> > @retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize
> is
> > too small to hold the
> > image. The current buffer size
> > needed to hold the image is returned
> > in ImageSize.
> > - @retval EFI_INVALID_PARAMETER The Image was NULL.
> > + @retval EFI_INVALID_PARAMETER The ImageSize is not too small and
> > Image is NULL.
> > @retval EFI_NOT_FOUND The current image is not copied
> to
> > the buffer.
> > @retval EFI_UNSUPPORTED The operation is not supported.
> > @retval EFI_SECURITY_VIOLATION The operation could not be
> performed
> > due to an authentication failure.
> > --
> > 2.38.1.windows.1
> >
> >
> >
> >
> >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#117186): https://edk2.groups.io/g/devel/message/117186
Mute This Topic: https://groups.io/mt/105189505/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details
2024-03-28 1:10 ` 回复: " gaoliming via groups.io
@ 2024-05-13 12:09 ` Pethaiyan, Madhan
2024-05-13 13:11 ` 回复: " gaoliming via groups.io
0 siblings, 1 reply; 8+ messages in thread
From: Pethaiyan, Madhan @ 2024-05-13 12:09 UTC (permalink / raw)
To: gaoliming, Kinney, Michael D, devel@edk2.groups.io
Cc: Liu, Zhiguang, Li, Yi1, 'GuoX Xu'
Hi all ,
I had created EDK2 PR, few weeks ago, thought it will be reviewed and approved . Please help to check and approve.
https://github.com/tianocore/edk2/pull/5584
https://github.com/tianocore/edk2/pull/5586
https://github.com/tianocore/edk2/pull/5587
Thanks,
P. Madhan
-----Original Message-----
From: gaoliming <gaoliming@byosoft.com.cn>
Sent: Thursday, March 28, 2024 6:41 AM
To: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>; devel@edk2.groups.io
Cc: Liu, Zhiguang <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; 'GuoX Xu' <guox.xu@intel.com>
Subject: 回复: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details
Madhan:
I have no comments for this patch set. Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Have you create Edk2 PR to verify the changes?
Thanks
Liming
> -----邮件原件-----
> 发件人: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>
> 发送时间: 2024年3月14日 16:17
> 收件人: Kinney, Michael D <michael.d.kinney@intel.com>;
> devel@edk2.groups.io
> 抄送: Liming Gao <gaoliming@byosoft.com.cn>; Liu, Zhiguang
> <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; GuoX Xu
> <guox.xu@intel.com>
> 主题: RE: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo
> description details
>
> Hi Mike ,
>
> I had raised new code review addressing the coding standard errors and
those
> were not part of my change any way ..
>
> Thanks,
> P. Madhan
>
> -----Original Message-----
> From: Kinney, Michael D <michael.d.kinney@intel.com>
> Sent: Sunday, March 10, 2024 1:47 AM
> To: devel@edk2.groups.io; Pethaiyan, Madhan
> <madhan.pethaiyan@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>; Liu, Zhiguang
> <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; GuoX Xu
> <guox.xu@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>
> Subject: RE: [edk2-devel] [PATCH V1] MdePkg: Update GetImage ,
> GetImageInfo description details
>
> Hi Madhan,
>
> I created a PR with all 3 related patches to run through EDK II CI.
>
> https://github.com/tianocore/edk2/pull/5453
>
> There are CI failures. Please resolve and send updated patches.
>
> Thanks,
>
> Mike
>
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > Pethaiyan Madhan
> > Sent: Friday, March 8, 2024 3:17 PM
> > To: devel@edk2.groups.io
> > Cc: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>; Kinney, Michael
> > D <michael.d.kinney@intel.com>; Liming Gao
> > <gaoliming@byosoft.com.cn>; Liu, Zhiguang <zhiguang.liu@intel.com>;
> > Li, Yi1 <yi1.li@intel.com>; GuoX Xu <guox.xu@intel.com>
> > Subject: [edk2-devel] [PATCH V1] MdePkg: Update GetImage ,
> > GetImageInfo description details
> >
> > 1.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():
> > Add the following sentence at the end of the Image parameter
> > description. "May be NULL with a zero ImageSize in order to
> > determine the size of the buffer needed".
> >
> > Modify the description of "EFI_INVALID_PARAMETER" return code as
> > "The ImageSize is not too small and Image is NULL."
> >
> > 2.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImageInfo():
> > Add the following sentence at the end of the ImageInfo parameter
> > description."May be NULL with a zero ImageInfoSize in order to
> > determine the size of the buffer needed".
> >
> > Modify the description of "EFI_INVALID_PARAMETER" return code as
> > "The ImageInfoSize is not too small and Image is NULL." and add new
> > descriptions for "EFI_INVALID_PARAMETER" return code.
> >
> > REF: UEFI spec v2.10 23.1.2
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4660
> >
> > Cc: Michael D Kinney <michael.d.kinney@intel.com>
> > Cc: Liming Gao <gaoliming@byosoft.com.cn>
> > Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> > Cc: Yi Li <yi1.li@intel.com>
> > Cc: GuoX Xu <guox.xu@intel.com>
> > Signed-off-by: Pethaiyan Madhan <madhan.pethaiyan@intel.com>
> > ---
> > MdePkg/Include/Protocol/FirmwareManagement.h | 14 ++++++++++++--
> > 1 file changed, 12 insertions(+), 2 deletions(-)
> >
> > diff --git a/MdePkg/Include/Protocol/FirmwareManagement.h
> > b/MdePkg/Include/Protocol/FirmwareManagement.h
> > index e535bb697d..90b7d83c8f 100644
> > --- a/MdePkg/Include/Protocol/FirmwareManagement.h
> > +++ b/MdePkg/Include/Protocol/FirmwareManagement.h
> > @@ -294,6 +294,8 @@ EFI_STATUS
> > to contain the image(s)
> > information if the buffer was too small.
> > @param[in, out] ImageInfo A pointer to the buffer in which
> > firmware places the current image(s)
> > information. The
> information is
> > an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
> > + May be NULL with a zero
> > ImageInfoSize in order to determine the size of the
> > + buffer needed.
> > @param[out] DescriptorVersion A pointer to the location in
> > which firmware returns the version number
> > associated with the
> > EFI_FIRMWARE_IMAGE_DESCRIPTOR.
> > @param[out] DescriptorCount A pointer to the location in
> > which firmware returns the number of @@ -314,7 +316,12 @@ EFI_STATUS
> > @retval EFI_SUCCESS The device was successfully
> > updated with the new image.
> > @retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was
> too
> > small. The current buffer size
> > needed to hold the image(s)
> > information is returned in ImageInfoSize.
> > - @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
> > + @retval EFI_INVALID_PARAMETER ImageInfoSize is not too small
> > and ImageInfo is NULL.
> > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > DescriptorVersion is NULL.
> > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > DescriptorCount is NULL.
> > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > DescriptorSize is NULL.
> > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > PackageVersion is NULL.
> > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > PackageVersionName is NULL.
> > @retval EFI_DEVICE_ERROR Valid information could not
> be
> > returned. Possible corrupted image.
> >
> > **/
> > @@ -341,6 +348,9 @@ EFI_STATUS
> > @param[in] ImageIndex A unique number identifying the
> > firmware image(s) within the device.
> > The number is between 1 and
> > DescriptorCount.
> > @param[out] Image Points to the buffer where the
> > current image is copied to.
> > + May be NULL with a zero
> ImageSize in
> > order to determine the size of the
> > + buffer needed.
> > +
> > @param[in, out] ImageSize On entry, points to the size of the
> > buffer pointed to by Image, in bytes.
> > On return, points to the length of
> > the image, in bytes.
> >
> > @@ -348,7 +358,7 @@ EFI_STATUS
> > @retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize
> is
> > too small to hold the
> > image. The current buffer size
> > needed to hold the image is returned
> > in ImageSize.
> > - @retval EFI_INVALID_PARAMETER The Image was NULL.
> > + @retval EFI_INVALID_PARAMETER The ImageSize is not too small and
> > Image is NULL.
> > @retval EFI_NOT_FOUND The current image is not copied
> to
> > the buffer.
> > @retval EFI_UNSUPPORTED The operation is not supported.
> > @retval EFI_SECURITY_VIOLATION The operation could not be
> performed
> > due to an authentication failure.
> > --
> > 2.38.1.windows.1
> >
> >
> >
> >
> >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#118868): https://edk2.groups.io/g/devel/message/118868
Mute This Topic: https://groups.io/mt/106075537/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 8+ messages in thread
* 回复: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details
2024-05-13 12:09 ` Pethaiyan, Madhan
@ 2024-05-13 13:11 ` gaoliming via groups.io
0 siblings, 0 replies; 8+ messages in thread
From: gaoliming via groups.io @ 2024-05-13 13:11 UTC (permalink / raw)
To: 'Pethaiyan, Madhan', 'Kinney, Michael D', devel
Cc: 'Liu, Zhiguang', 'Li, Yi1', 'GuoX Xu'
These PRs are all failure. Please update them.
Thanks
Liming
> -----邮件原件-----
> 发件人: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>
> 发送时间: 2024年5月13日 20:10
> 收件人: gaoliming <gaoliming@byosoft.com.cn>; Kinney, Michael D
> <michael.d.kinney@intel.com>; devel@edk2.groups.io
> 抄送: Liu, Zhiguang <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; 'GuoX
> Xu' <guox.xu@intel.com>
> 主题: RE: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo
> description details
>
> Hi all ,
>
> I had created EDK2 PR, few weeks ago, thought it will be reviewed and approved .
> Please help to check and approve.
>
> https://github.com/tianocore/edk2/pull/5584
> https://github.com/tianocore/edk2/pull/5586
> https://github.com/tianocore/edk2/pull/5587
>
> Thanks,
> P. Madhan
>
> -----Original Message-----
> From: gaoliming <gaoliming@byosoft.com.cn>
> Sent: Thursday, March 28, 2024 6:41 AM
> To: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>; devel@edk2.groups.io
> Cc: Liu, Zhiguang <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; 'GuoX Xu'
> <guox.xu@intel.com>
> Subject: 回复: [edk2-devel] [PATCH V1] MdePkg: Update GetImage ,
> GetImageInfo description details
>
> Madhan:
> I have no comments for this patch set. Reviewed-by: Liming Gao
> <gaoliming@byosoft.com.cn>
>
> Have you create Edk2 PR to verify the changes?
>
> Thanks
> Liming
> > -----邮件原件-----
> > 发件人: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>
> > 发送时间: 2024年3月14日 16:17
> > 收件人: Kinney, Michael D <michael.d.kinney@intel.com>;
> > devel@edk2.groups.io
> > 抄送: Liming Gao <gaoliming@byosoft.com.cn>; Liu, Zhiguang
> > <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; GuoX Xu
> > <guox.xu@intel.com>
> > 主题: RE: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo
> > description details
> >
> > Hi Mike ,
> >
> > I had raised new code review addressing the coding standard errors and
> those
> > were not part of my change any way ..
> >
> > Thanks,
> > P. Madhan
> >
> > -----Original Message-----
> > From: Kinney, Michael D <michael.d.kinney@intel.com>
> > Sent: Sunday, March 10, 2024 1:47 AM
> > To: devel@edk2.groups.io; Pethaiyan, Madhan
> > <madhan.pethaiyan@intel.com>
> > Cc: Liming Gao <gaoliming@byosoft.com.cn>; Liu, Zhiguang
> > <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; GuoX Xu
> > <guox.xu@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>
> > Subject: RE: [edk2-devel] [PATCH V1] MdePkg: Update GetImage ,
> > GetImageInfo description details
> >
> > Hi Madhan,
> >
> > I created a PR with all 3 related patches to run through EDK II CI.
> >
> > https://github.com/tianocore/edk2/pull/5453
> >
> > There are CI failures. Please resolve and send updated patches.
> >
> > Thanks,
> >
> > Mike
> >
> > > -----Original Message-----
> > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > > Pethaiyan Madhan
> > > Sent: Friday, March 8, 2024 3:17 PM
> > > To: devel@edk2.groups.io
> > > Cc: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>; Kinney, Michael
> > > D <michael.d.kinney@intel.com>; Liming Gao
> > > <gaoliming@byosoft.com.cn>; Liu, Zhiguang <zhiguang.liu@intel.com>;
> > > Li, Yi1 <yi1.li@intel.com>; GuoX Xu <guox.xu@intel.com>
> > > Subject: [edk2-devel] [PATCH V1] MdePkg: Update GetImage ,
> > > GetImageInfo description details
> > >
> > > 1.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():
> > > Add the following sentence at the end of the Image parameter
> > > description. "May be NULL with a zero ImageSize in order to
> > > determine the size of the buffer needed".
> > >
> > > Modify the description of "EFI_INVALID_PARAMETER" return code as
> > > "The ImageSize is not too small and Image is NULL."
> > >
> > > 2.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImageInfo():
> > > Add the following sentence at the end of the ImageInfo parameter
> > > description."May be NULL with a zero ImageInfoSize in order to
> > > determine the size of the buffer needed".
> > >
> > > Modify the description of "EFI_INVALID_PARAMETER" return code as
> > > "The ImageInfoSize is not too small and Image is NULL." and add new
> > > descriptions for "EFI_INVALID_PARAMETER" return code.
> > >
> > > REF: UEFI spec v2.10 23.1.2
> > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4660
> > >
> > > Cc: Michael D Kinney <michael.d.kinney@intel.com>
> > > Cc: Liming Gao <gaoliming@byosoft.com.cn>
> > > Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> > > Cc: Yi Li <yi1.li@intel.com>
> > > Cc: GuoX Xu <guox.xu@intel.com>
> > > Signed-off-by: Pethaiyan Madhan <madhan.pethaiyan@intel.com>
> > > ---
> > > MdePkg/Include/Protocol/FirmwareManagement.h | 14 ++++++++++++--
> > > 1 file changed, 12 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/MdePkg/Include/Protocol/FirmwareManagement.h
> > > b/MdePkg/Include/Protocol/FirmwareManagement.h
> > > index e535bb697d..90b7d83c8f 100644
> > > --- a/MdePkg/Include/Protocol/FirmwareManagement.h
> > > +++ b/MdePkg/Include/Protocol/FirmwareManagement.h
> > > @@ -294,6 +294,8 @@ EFI_STATUS
> > > to contain the image(s)
> > > information if the buffer was too small.
> > > @param[in, out] ImageInfo A pointer to the buffer in which
> > > firmware places the current image(s)
> > > information. The
> > information is
> > > an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
> > > + May be NULL with a zero
> > > ImageInfoSize in order to determine the size of the
> > > + buffer needed.
> > > @param[out] DescriptorVersion A pointer to the location in
> > > which firmware returns the version number
> > > associated with the
> > > EFI_FIRMWARE_IMAGE_DESCRIPTOR.
> > > @param[out] DescriptorCount A pointer to the location in
> > > which firmware returns the number of @@ -314,7 +316,12 @@ EFI_STATUS
> > > @retval EFI_SUCCESS The device was successfully
> > > updated with the new image.
> > > @retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was
> > too
> > > small. The current buffer size
> > > needed to hold the image(s)
> > > information is returned in ImageInfoSize.
> > > - @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.
> > > + @retval EFI_INVALID_PARAMETER ImageInfoSize is not too small
> > > and ImageInfo is NULL.
> > > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > > DescriptorVersion is NULL.
> > > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > > DescriptorCount is NULL.
> > > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > > DescriptorSize is NULL.
> > > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > > PackageVersion is NULL.
> > > + @retval EFI_INVALID_PARAMETER ImageInfoSize is non-zero and
> > > PackageVersionName is NULL.
> > > @retval EFI_DEVICE_ERROR Valid information could not
> > be
> > > returned. Possible corrupted image.
> > >
> > > **/
> > > @@ -341,6 +348,9 @@ EFI_STATUS
> > > @param[in] ImageIndex A unique number identifying the
> > > firmware image(s) within the device.
> > > The number is between 1 and
> > > DescriptorCount.
> > > @param[out] Image Points to the buffer where the
> > > current image is copied to.
> > > + May be NULL with a zero
> > ImageSize in
> > > order to determine the size of the
> > > + buffer needed.
> > > +
> > > @param[in, out] ImageSize On entry, points to the size of the
> > > buffer pointed to by Image, in bytes.
> > > On return, points to the length of
> > > the image, in bytes.
> > >
> > > @@ -348,7 +358,7 @@ EFI_STATUS
> > > @retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize
> > is
> > > too small to hold the
> > > image. The current buffer size
> > > needed to hold the image is returned
> > > in ImageSize.
> > > - @retval EFI_INVALID_PARAMETER The Image was NULL.
> > > + @retval EFI_INVALID_PARAMETER The ImageSize is not too small and
> > > Image is NULL.
> > > @retval EFI_NOT_FOUND The current image is not copied
> > to
> > > the buffer.
> > > @retval EFI_UNSUPPORTED The operation is not supported.
> > > @retval EFI_SECURITY_VIOLATION The operation could not be
> > performed
> > > due to an authentication failure.
> > > --
> > > 2.38.1.windows.1
> > >
> > >
> > >
> > >
> > >
>
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#118863): https://edk2.groups.io/g/devel/message/118863
Mute This Topic: https://groups.io/mt/105189505/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2024-05-13 15:43 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-03-08 23:16 [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details Pethaiyan Madhan
2024-03-09 19:34 ` Michael D Kinney
2024-03-09 20:17 ` Michael D Kinney
2024-03-14 8:16 ` Pethaiyan, Madhan
2024-03-26 5:51 ` Pethaiyan, Madhan
2024-03-28 1:10 ` 回复: " gaoliming via groups.io
2024-05-13 12:09 ` Pethaiyan, Madhan
2024-05-13 13:11 ` 回复: " gaoliming via groups.io
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox