Re: Updating/adding video mode

[prabin ca <prabinca4u@gmail.com>]

Thanks Andrew,

For your reply. EDID overriding is the last solution for me. Any way thanks for pointing the EFI_EDID protocols.

> On 19-Sep-2018, at 11:01 PM, Andrew Fish <afish@apple.com> wrote:
> 
> Prabin,
> 
> There is not an easy answer to your question. 
> 1) What video resolution is available can be a function of what monitor is plugged in to the graphics card. 
> 2) The monitor can publish an EDID that defines what resolutions the monitor supports. EDID is a VESA standard. 
> 3) An EFI Platform can provide an EFI_EDID_OVERRIDE_PROTOCOL that can impact the available video modes that get published. 
> 4) The GOP card will publish EDID information via the EFI_EDID_DISCOVERED_PROTOCOL. 
> 
> As I mentioned the EDID data structure is defined by a VESA standard, but it also has to be valid for what the monitor can support. Basically you can override the EDID and tell the GOP card to does something the monitor can not support. 
> 
> Some platforms use the ConSpliter and it produces a virtual GOP protocol that will aggregate hardware GOPs. So for example if you system has an internal panel and an external monitor installed you could end up with 2 HW GOP protocols and a virtual GOP protocol that represents the ConSpliter. 
> 
> Thanks,
> 
> Andrew Fish 
> 
>> On Sep 15, 2018, at 10:37 PM, prabin ca <prabinca4u@gmail.com> wrote:
>> 
>> Any points on this really helpful for me. 
>> 
>>> On 15-Sep-2018, at 6:46 AM, prabin ca <prabinca4u@gmail.com> wrote:
>>> 
>>> Hi Team,
>>> I’m working with a platform having UHD (3840X2160as native resolution) display screen. I have dump the video modes using EFI_GRAPHICS_PROTOCOL.
>>> 
>>> Following are the dump result 
>>> 
>>> Mode 0 : hRes = 3840 Vres=2160
>>> Mode 1 : hRes = 640  Vres = 480
>>> Mode 2 : hRes = 800 Vres = 600
>>> Mode 3 : hRes = 1024 Vres = 768
>>> Mode 4 : hRes = 1280 Vres = 1024
>>> Mode 5 : hRes = 1600 Vres = 1200
>>> Mode 6 : hRes = 1920 Vres = 1440 
>>> 
>>> In the supported video mode list, 1920X1080 is not there. Is there any way to add support for this resolution. I have checked UEFI spec but didn’t find any useful API/protocol 
>>> Any help really appreciate.
>> _______________________________________________
>> edk2-devel mailing list
>> edk2-devel@lists.01.org
>> https://lists.01.org/mailman/listinfo/edk2-devel
>