public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Nikita Leshenko" <nikita.leshchenko@oracle.com>
To: Liran Alon <liran.alon@oracle.com>
Cc: devel@edk2.groups.io, lersek@redhat.com, aaron.young@oracle.com,
	jordan.l.justen@intel.com, ard.biesheuvel@linaro.org
Subject: Re: [PATCH v3 00/17] OvmfPkg: Support booting from VMware PVSCSI controller
Date: Sun, 29 Mar 2020 12:29:22 +0300	[thread overview]
Message-ID: <D9FB3F2B-DC0F-488F-B97C-3C761EEE6ADB@oracle.com> (raw)
In-Reply-To: <20200328200100.60786-1-liran.alon@oracle.com>



> On 28 Mar 2020, at 23:00, Liran Alon <liran.alon@oracle.com> wrote:
> 
> Hi,
> 
> This series adds driver support for VMware PVSCSI controller.
> 
> This controller is supported by VMware and QEMU. This work is part of
> the more general agenda of enhancing OVMF boot device support to have
> feature parity with SeaBIOS (Which supports booting from VMware PVSCSI).
> 
> I pushed a copy of these (v3) patches to https://github.com/nikital/edk2/tree/pvscsi6
> The v2 patches can be found at https://github.com/nikital/edk2/tree/pvscsi5
> The v1 patches can be found at https://github.com/nikital/edk2/tree/pvscsi4
> 
> Regards,
> -Liran
> 
> v2->v3:
> * Add function documentation to PvScsiWriteCmdDesc with “@param” to explain DescWords alignment requirement. [Laszlo]
> * Also set Packet’s HostAdapterStatus and TargetStatus when returning EFI_BAD_BUFFER_SIZE from PassThru() method. [Liran]
> * Add comments explaining why DMA communication buffer fields sizes are defined as they are. [Laszlo]
> * Remove unnecessary (UINT64) casts from EFI_PHYSICAL_ADDRESS expressions. [Laszlo]
> * Changed HandleResponse() to always copy SenseData based on Response->SenseLen. Not only if ScsiStatus equal to CHECK. [Liran]
> * Changed HandleResponse() to update Packet TransferLength only on underrun. [Liran]
> * Changed PassThru() to return EFI_STATUS_SUCCESS on device return overrun/underrun. [Laszlo & Liran]
> * Removed unnecessary PvScsiAllocatePages(), PvScsiFreePages(), PvScsiMapBuffer() and PvScsiUnmapBuffer() utility functions. [Laszlo]
> * Changed PvScsiInitRings() to align PVSCSI_CMD_DESC_SETUP_RINGS command to UINT32 before using it with EfiPciIoWidthFifoUint32. [Laszlo]
> * Removed PciIoOperation parameter from PvScsiAllocateSharedPages(). [Laszlo
> * Added STATIC_ASSERT() to verify PVSCSI_CMD_DESC_SETUP_RINGS is of size multiple of UINT32 words [Laszlo].
> * Added reset device before either freeing PVSCSI rings or DMA communication buffer. [Laszlo]
> * Removed unnecessary cast to (VOID **) in call to PvScsiFreeSharedPages() in PvScsiUninit(). [Laszlo]
> * Added #include <Library/BaseLib.h> and BaseLib to PvScsiDxe.inf because of RShiftU64() usage. [Laszlo]
> 
> v1->v2:
> * Removed Nikita’s Reviewed-By tags. [Laszlo]
> * Renamed PvScsi.inf to PvScsiDxe.inf and fixed references from all DSC files. [Laszlo]
> * Changed “!ifdef $(PVSCSI_ENABLE)” in DSC files to “!if $(PVSCSI_ENABLE) == TRUE”. [Laszlo]
> * Fix Identation in various places. [Laszlo]
> * Added “#include <Uefi/UefiSpec.h>” for EFI_SYSTEM_TABLE. [Laszlo]
> * Fix various typos. [Laszlo]
> * Made “STATIC” on same line of object delcerations. [Laszlo]
> * Added Laszlo’s Reviewed-by tags on some patches. [Laszlo]
> * Added missing spaces before “(“ on various function calls. [Laszlo]
> * Added PvScsi.h header file to INF [Sources] section. [Laszlo]
> * Changed [Protocols] section in INF file to be lexicographically sorted. [Laszlo]
> * Changed [PCDs] section in INF file to be lexigraphically sorted. [Laszlo]
> * Fixed function comments blocks to be “/** **/” instead of “//” style. [Laszlo]
> * Changed PvScsiGetTargetLun() to ZeroMem() all target bytes except first one. [Laszlo]
> * Replaced “IOSpace” with “MMIO-Space” in comments. [Laszlo]
> * Changed enums to match EDK2 coding convention. [Laszlo]
> * Use PCI_BAR_IDX0 instead of hard-coded 0. [Laszlo]
> * Use EFI_PAGES_TO_SIZE() instead of manually multiplying with EFI_PAGE_SIZE. [Laszlo]
> * Use RShiftU64() to shift UINT64 vars. [Laszlo]
> * Changed ReqNumEntries var to UINT32 and shift to use “1U <<” instead of “1 <<”. [Laszlo]
> * Changed condition on flag (In PvScsiWaitForRequestCompletion()) to be a boolean expression. [Laszlo]
> * Replaced “FakeHostAdapterError” label with a utility function. [Laszlo]
> * Added debug message to PvScsiExitBoot() to assist debugging. [Laszlo]
> * Fixed resource management to make each function either completely succeed or completely fail and free all resources. [Laszlo]
> * Changed PvScsiWriteCmdDesc() to use EfiPciIoWidthFifoUint32. [Laszlo]
> * Changed PvScsiWriteCmdDesc() prototype to make clear it descriptor must be an array of words. [Laszlo]
> 
The entire series looks good to me:
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>

  parent reply	other threads:[~2020-03-29  9:29 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-28 20:00 [PATCH v3 00/17] OvmfPkg: Support booting from VMware PVSCSI controller Liran Alon
2020-03-28 20:00 ` [PATCH v3 01/17] OvmfPkg/PvScsiDxe: Create empty driver Liran Alon
2020-03-28 20:00 ` [PATCH v3 02/17] OvmfPkg/PvScsiDxe: Install DriverBinding protocol Liran Alon
2020-03-28 20:00 ` [PATCH v3 03/17] OvmfPkg/PvScsiDxe: Report name of driver Liran Alon
2020-03-28 20:00 ` [PATCH v3 04/17] OvmfPkg/PvScsiDxe: Probe PCI devices and look for PvScsi Liran Alon
2020-03-28 20:00 ` [PATCH v3 05/17] OvmfPkg/PvScsiDxe: Install stubbed EXT_SCSI_PASS_THRU Liran Alon
2020-03-28 20:00 ` [PATCH v3 06/17] OvmfPkg/PvScsiDxe: Report the number of targets and LUNs Liran Alon
2020-03-28 20:00 ` [PATCH v3 07/17] OvmfPkg/PvScsiDxe: Translate Target & LUN to/from DevicePath Liran Alon
2020-03-28 20:00 ` [PATCH v3 08/17] OvmfPkg/PvScsiDxe: Open PciIo protocol for later use Liran Alon
2020-03-28 20:00 ` [PATCH v3 09/17] OvmfPkg/PvScsiDxe: Backup/Restore PCI attributes on Init/UnInit Liran Alon
2020-03-28 20:00 ` [PATCH v3 10/17] OvmfPkg/PvScsiDxe: Enable MMIO-Space & Bus-Mastering in PCI attributes Liran Alon
2020-03-28 20:00 ` [PATCH v3 11/17] OvmfPkg/PvScsiDxe: Define device interface structures and constants Liran Alon
2020-03-28 20:00 ` [PATCH v3 12/17] OvmfPkg/PvScsiDxe: Reset adapter on init Liran Alon
2020-03-30 15:19   ` [edk2-devel] " Laszlo Ersek
2020-03-28 20:00 ` [PATCH v3 13/17] OvmfPkg/PvScsiDxe: Setup requests and completions rings Liran Alon
2020-03-30 15:54   ` [edk2-devel] " Laszlo Ersek
2020-03-30 17:24     ` Liran Alon
2020-03-30 20:46       ` Laszlo Ersek
2020-03-28 20:00 ` [PATCH v3 14/17] OvmfPkg/PvScsiDxe: Introduce DMA communication buffer Liran Alon
2020-03-30 16:06   ` [edk2-devel] " Laszlo Ersek
2020-03-28 20:00 ` [PATCH v3 15/17] OvmfPkg/PvScsiDxe: Support sending SCSI request and receive response Liran Alon
2020-03-30 16:22   ` [edk2-devel] " Laszlo Ersek
2020-03-28 20:00 ` [PATCH v3 16/17] OvmfPkg/PvScsiDxe: Reset device on ExitBootServices() Liran Alon
2020-03-30 16:23   ` [edk2-devel] " Laszlo Ersek
2020-03-28 20:01 ` [PATCH v3 17/17] OvmfPkg/PvScsiDxe: Enable device 64-bit DMA addresses Liran Alon
2020-03-29  9:29 ` Nikita Leshenko [this message]
2020-03-30 16:53 ` [edk2-devel] [PATCH v3 00/17] OvmfPkg: Support booting from VMware PVSCSI controller Laszlo Ersek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=D9FB3F2B-DC0F-488F-B97C-3C761EEE6ADB@oracle.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox