From: "Jin, Eric" <eric.jin@intel.com>
To: Supreeth Venkatesh <supreeth.venkatesh@arm.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Wu, Jiaxin" <jiaxin.wu@intel.com>
Subject: Re: [edk2-test][Patch] uefi-sct/EMS:Add the checkpoint for SetData
Date: Fri, 12 Oct 2018 17:01:52 +0000 [thread overview]
Message-ID: <DA72DC7456565B47808A57108259571F636E2C50@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <ba7574bc-5143-398d-c4b0-8871a0dc3c4b@arm.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Jiaxin, could you please review the patch? Thanks
Best Regards
Eric
-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Supreeth Venkatesh
Sent: Friday, October 12, 2018 4:57 PM
To: Jin, Eric <eric.jin@intel.com>; edk2-devel@lists.01.org
Subject: Re: [edk2] [edk2-test][Patch] uefi-sct/EMS:Add the checkpoint for SetData
Eric,
We don't have EMS support in AARCH64, Can someone from Intel review this?
Thanks,
Supreeth
On 10/12/2018 09:20 AM, Eric Jin wrote:
> Spec clarifies the configuration clearance behavior
> Correct the end line
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Eric Jin <eric.jin@intel.com>
> Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
> ---
> .../IP4Config2/Include/Ip4Config2AssertionGuid.tcl | 5 +-
> .../TestCase/IP4Config2/SetData.Func1.Case2.tcl | 714 +++++++++++++
> .../Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl | 140 +--
> .../Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl | 788 +++++++-------
> .../Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl | 144 +--
> .../Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl | 982 +++++++++---------
> .../Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl | 542 +++++-----
> .../TestCase/IP6Config/Include/Ip6Config.inc.tcl | 192 ++--
> .../TestCase/IP6Config/Include/Ip6Config.proc.tcl | 30 +-
> .../IP6Config/Include/Ip6ConfigAssertionGuid.tcl | 180 ++--
> .../TestCase/IP6Config/Include/Ip6ConfigDefine.tcl | 102 +-
> .../IP6Config/RegisterDataNotify.Conf1.Case1.tcl | 178 ++--
> .../IP6Config/RegisterDataNotify.Conf2.Case1.tcl | 178 ++--
> .../IP6Config/RegisterDataNotify.Conf3.Case1.tcl | 216 ++--
> .../IP6Config/RegisterDataNotify.Func1.Case1.tcl | 1076 ++++++++++----------
> .../IP6Config/RegisterDataNotify.Func1.Case2.tcl | 530 +++++-----
> .../Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl | 596 +++++------
> .../Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl | 474 ++++-----
> .../Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl | 556 +++++-----
> .../Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl | 142 +--
> .../Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl | 1020 +++++++++----------
> .../Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl | 546 +++++-----
> .../Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl | 838 +++++++++++++++
> .../IP6Config/UnregisterDataNotify.Conf1.Case1.tcl | 178 ++--
> .../IP6Config/UnregisterDataNotify.Conf2.Case1.tcl | 164 +--
> .../IP6Config/UnregisterDataNotify.Conf2.Case2.tcl | 196 ++--
> .../IP6Config/UnregisterDataNotify.Func1.Case1.tcl | 194 ++--
> .../IP6Config/UnregisterDataNotify.Func1.Case2.tcl | 472 ++++-----
> 31 files changed, 6683 insertions(+), 5116 deletions(-)
> create mode 100644 uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
> create mode 100644 uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
>
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl b/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
> index 91a4fd1..e0604b2 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP4Config2/Include/Ip4Config2AssertionGuid.tcl
> @@ -1,6 +1,6 @@
> #
> # Copyright 2017 Unified EFI, Inc.<BR>
> -# Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
> +# Copyright (c) 2017 - 2018, Intel Corporation. All rights reserved.<BR>
> #
> # This program and the accompanying materials
> # are licensed and made available under the terms and conditions of the BSD License
> @@ -39,6 +39,9 @@ set Ip4Config2SetDataFunc1AssertionGuid008 00FBB58A-4BB3-499F-AE6B-744B6B9932E6
> set Ip4Config2SetDataFunc1AssertionGuid009 DB8EF05C-085F-45D1-A0B1-DC2F307B6F1E
> set Ip4Config2SetDataFunc1AssertionGuid010 29143621-896C-4FB9-9E70-7A4D2DA6BEE0
> set Ip4Config2SetDataFunc1AssertionGuid011 72FEDF83-6755-4212-AF0F-780F457EFAA7
> +set Ip4Config2SetDataFunc1AssertionGuid012 EB7769D1-A31F-4F37-86F3-2BBF54834785
> +set Ip4Config2SetDataFunc1AssertionGuid013 78F3A664-A8E4-43B8-961F-71033E9145F2
> +set Ip4Config2SetDataFunc1AssertionGuid014 7F717D50-3A7C-4E2A-9F15-0A802E9BAFE6
>
> #
> # Guid for GetData() interface
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
> new file mode 100644
> index 0000000..0517032
> --- /dev/null
> +++ b/uefi-sct/EMS/Bin/TestCase/IP4Config2/SetData.Func1.Case2.tcl
> @@ -0,0 +1,714 @@
> +#
> +# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid B2AD20DF-2325-42B2-A199-A49ADF04A5DD
> +CaseName SetData.Func1.Case2
> +CaseCategory IP4Config2
> +CaseDescription {SetData must succeed When DataSize is 0 and
> + Data is NULL,and existing configuration is cleared.}
> +
> +################################################################################
> +Include IP4Config2/Include/Ip4Config2.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip4Config2DataSize
> +UINT32 R_Ip4Config2DataType
> +UINT32 R_Ip4Config2Policy
> +
> +#
> +# Check Point: Call Ip4Config2->SetData to set Static policy
> +#
> +SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
> +SetVar R_Ip4Config2DataSize [Sizeof UINT32]
> +SetVar R_Ip4Config2Policy $IP4C2P(Static)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2Policy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
> + "Ip4Config2.SetData - Call SetData to set Static policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid001 \
> + "Ip4Config2.SetData - Call SetData to set Static policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip4Config2DataType $IP4C2DT(Policy)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Policy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip4Config2Policy
> +if { $R_Ip4Config2Policy == $IP4C2P(Static) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid002 \
> + "Set Static policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip4Config2Policy $IP4C2DT(Policy)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid002 \
> + "Set Static policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address
> +#
> +EFI_IP4_CONFIG2_MANUAL_ADDRESS R_Temp_Ip4Config2ManualAddress
> +EFI_IP4_CONFIG2_MANUAL_ADDRESS R_Ip4Config2ManualAddress
> +SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IP4_CONFIG2_MANUAL_ADDRESS]
> +SetIpv4Address R_Temp_Ip4Config2ManualAddress.Address "10.239.9.15"
> +SetIpv4Address R_Temp_Ip4Config2ManualAddress.SubnetMask "255.255.255.0"
> +SetVar R_Ip4Config2ManualAddress @R_Temp_Ip4Config2ManualAddress
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2ManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
> + "Ip4Config2.SetData - Call SetData to set Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid003 \
> + "IP4Config2.SetData - Call SetData to set Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2ManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> +EFI_IPv4_ADDRESS R_Addr1
> +EFI_IPv4_ADDRESS R_Addr2
> +set R_Addr1 [GetIpv4Address R_Ip4Config2ManualAddress.Address]
> +puts "R_Addr1 - $R_Addr1"
> +set R_Addr2 [GetIpv4Address R_Ip4Config2ManualAddress.SubnetMask]
> +puts "R_Addr1 - $R_Addr2"
> +
> +if {[string compare -nocase $R_Addr1 10.239.9.15] == 0} {
> + if {[string compare -nocase $R_Addr2 255.255.255.0] == 0} {
> + set assert pass
> + } else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
> + "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
> + "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid004 \
> + "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Points : Set Gateway
> +#
> +EFI_IPv4_ADDRESS R_Ip4Config2Gateway
> +SetVar R_Ip4Config2DataType $IP4C2DT(Gateway)
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +SetIpv4Address R_Ip4Config2Gateway "10.239.9.241"
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
> + "Ip4Config2.SetData - Call SetData to set Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid005 \
> + "Ip4Config2.SetData - Call SetData to set Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +EFI_IPv4_ADDRESS R_Addr3
> +set R_Addr3 [GetIpv4Address R_Ip4Config2Gateway]
> +puts "R_Addr3 - $R_Addr3"
> +
> +if {[string compare -nocase $R_Addr3 10.239.9.241] == 0} {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid006 \
> + "Set Gateway succeeds(event is signaled correctly and data correct)."
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid006 \
> + "Set Gateway succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Dns Server
> +#
> +EFI_IPv4_ADDRESS R_Ip4Config2DnsServer
> +SetVar R_Ip4Config2DataType $IP4C2DT(DnsServer)
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +SetIpv4Address R_Ip4Config2DnsServer "10.248.2.5"
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServer,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
> + "Ip4Config2.SetData - Call SetData to set Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid007 \
> + "Ip4Config2.SetData - Call SetData to set Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +EFI_IPv4_ADDRESS R_Addr4
> +set R_Addr4 [GetIpv4Address R_Ip4Config2DnsServer]
> +puts "R_Addr4 - $R_Addr4"
> +
> +if {[string compare -nocase $R_Addr4 10.248.2.5] == 0} {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid008 \
> + "Set Dns succeeds(event is signaled correctly and data correct)."
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid008 \
> + "Set Dns succeeds(event is signaled correctly and data correct)."
> +
> +
> +
> +#
> +# Clean up - Call SetData when DataSize is 0 and Data is NULL
> +#
> +
> +
> +
> +#
> +# Set Manual Address
> +#
> +
> +SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> +SetVar R_Ip4Config2DataSize 0
> +
> +
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
> + "Ip4Config2.SetData - Call SetData to clear Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
> + "SetData to clear Manual Address failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid012 \
> + "IP4Config2.SetData - Call SetData to clear Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip4Config2DataType $IP4C2DT(ManualAddress)
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IP4_CONFIG2_MANUAL_ADDRESS]
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2ManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +#
> +# Set Gateway Address
> +#
> +
> +
> +SetVar R_Ip4Config2DataType $IP4C2DT(Gateway)
> +SetVar R_Ip4Config2DataSize 0
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
> + "Ip4Config2.SetData - Call SetData to clear Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
> + "SetData to clear Gateway Address failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid013 \
> + "Ip4Config2.SetData - Call SetData to clear Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2Gateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Gateway Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +#
> +# Check Point : Set Dns Server
> +#
> +
> +SetVar R_Ip4Config2DataType $IP4C2DT(DnsServer)
> +SetVar R_Ip4Config2DataSize 0
> +
> +SetVar R_Context 0
> +Ip4Config2->RegisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip4Config2->SetData "@R_Ip4Config2DataType,@R_Ip4Config2DataSize,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
> + "Ip4Config2.SetData - Call SetData to clear Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
> + "SetData to clear Dns Address failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip4Config2SetDataFunc1AssertionGuid014 \
> + "Ip4Config2.SetData - Call SetData to clear Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +Ip4Config2->UnregisterDataNotify "@R_Ip4Config2DataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip4Config2DataSize [Sizeof EFI_IPv4_ADDRESS]
> +Ip4Config2->GetData "@R_Ip4Config2DataType,&@R_Ip4Config2DataSize,&@R_Ip4Config2DnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip4Config2.GetData - Call GetData to get Dns Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +
> +EndScope _IP4CONFIG2_SETDATA_FUNC1_CASE2
> +
> +EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
> index a6b788d..beeb2fb 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf1.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 11FF93B5-8A85-4770-88C2-99E0AF9AE0AA
> -CaseName GetData.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when data size is NULL.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->GetData with datasize is NULL.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,NULL,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigGetDataConf1AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with DataSize NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -EndScope _IP6CONFIG_GETDATA_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 11FF93B5-8A85-4770-88C2-99E0AF9AE0AA
> +CaseName GetData.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when data size is NULL.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->GetData with datasize is NULL.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,NULL,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigGetDataConf1AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with DataSize NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +EndScope _IP6CONFIG_GETDATA_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
> index c095756..6f90a9c 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf2.Case1.tcl
> @@ -1,71 +1,71 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid B4C48D71-EF72-42e0-BD57-4825F7EB7B9F
> -CaseName GetData.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when data is NULL if data size is not zero.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->GetData with data is NULL.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,NULL,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigGetDataConf2AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with Data NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -EndScope _IP6CONFIG_GETDATA_CONF2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid B4C48D71-EF72-42e0-BD57-4825F7EB7B9F
> +CaseName GetData.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when data is NULL if data size is not zero.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->GetData with data is NULL.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,NULL,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigGetDataConf2AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with Data NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +EndScope _IP6CONFIG_GETDATA_CONF2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
> index c90d442..5688648 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf3.Case1.tcl
> @@ -1,395 +1,395 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 7B341FC4-1F10-4851-83AD-103A56B0EC35
> -CaseName GetData.Conf3.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when DataSize is too small for the data type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF3
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_Context1
> -UINTN R_DoneEvent
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy failure (event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid value
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData with valid value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -#
> -# Check Point : Get Manual Address with datasize too small
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize 16
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BUFFER_TOO_SMALL]
> -RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with the datasize too small." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BUFFER_TOO_SMALL"
> -
> -GetVar R_Ip6ConfigDataSize
> -set L_ObtainedSize [ expr { $R_Ip6ConfigDataSize } ]
> -set L_DesiredSize [ Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS ]
> -if { [ expr { $L_ObtainedSize % $L_DesiredSize } ] == 0 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid002 \
> - "Ip6Config.GetData - Correctly Modify the DataSize." \
> - "ReturnSize - $L_ObtainedSize, ExpectedSize - $L_DesiredSize"
> -
> -#
> -# Clean up
> -#
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF3
> - EndLog
> - return
> -}
> -
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Unregister Event for Manual Address and close event
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_GETDATA_CONF3
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 7B341FC4-1F10-4851-83AD-103A56B0EC35
> +CaseName GetData.Conf3.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when DataSize is too small for the data type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF3
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_Context1
> +UINTN R_DoneEvent
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy failure (event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid value
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData with valid value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +#
> +# Check Point : Get Manual Address with datasize too small
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize 16
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BUFFER_TOO_SMALL]
> +RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with the datasize too small." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BUFFER_TOO_SMALL"
> +
> +GetVar R_Ip6ConfigDataSize
> +set L_ObtainedSize [ expr { $R_Ip6ConfigDataSize } ]
> +set L_DesiredSize [ Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS ]
> +if { [ expr { $L_ObtainedSize % $L_DesiredSize } ] == 0 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigGetDataConf3AssertionGuid002 \
> + "Ip6Config.GetData - Correctly Modify the DataSize." \
> + "ReturnSize - $L_ObtainedSize, ExpectedSize - $L_DesiredSize"
> +
> +#
> +# Clean up
> +#
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF3
> + EndLog
> + return
> +}
> +
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Unregister Event for Manual Address and close event
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_GETDATA_CONF3
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
> index e36cdfc..bd38be0 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf4.Case1.tcl
> @@ -1,73 +1,73 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid F340A957-9345-478d-BE53-5F7C561C1866
> -CaseName GetData.Conf4.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when data type is not found.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF4
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -UINTN R_Ip6ConfigMaximumType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->GetData with the date type not existing.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximumType,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> -RecordAssertion $assert $Ip6ConfigGetDataConf4AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData with Datatype not existing." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> -
> -EndScope _IP6CONFIG_GETDATA_CONF4
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid F340A957-9345-478d-BE53-5F7C561C1866
> +CaseName GetData.Conf4.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when data type is not found.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF4
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +UINTN R_Ip6ConfigMaximumType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->GetData with the date type not existing.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximumType,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigGetDataConf4AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData with Datatype not existing." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +EndScope _IP6CONFIG_GETDATA_CONF4
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
> index c39323f..c186520 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Conf5.Case1.tcl
> @@ -1,492 +1,492 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 6638523D-470B-4c50-AE75-DE0CE6854DE8
> -CaseName GetData.Conf5.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_CONF5
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Context1
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits 20
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid parameter
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_NOT_READY } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> -
> -#
> -# Check Point : Get Manual Address with valid parameter before the former setting finishes
> -#
> -set L_ManualListLen 1
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_READY]
> -RecordAssertion $assert $Ip6ConfigGetDataConf5AssertionGuid001 \
> - "Ip6Config.SetData - Call GetData to get manual address before the former setting finishes." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> -
> -#
> -# Make sure the former configurations succeeds
> -# (Eliminate the side-effect to other cases)
> -#
> -set i 0
> -set L_TimeOut 30
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -set assert pass
> -while { $R_Status == $EFI_NOT_READY } {
> - Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> - GetAck
> - GetVar R_Status
> - if { $R_Status == $EFI_SUCCESS } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_GETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_GETDATA_CONF5
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 6638523D-470B-4c50-AE75-DE0CE6854DE8
> +CaseName GetData.Conf5.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_CONF5
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Context1
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 20
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 10." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_NOT_READY } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> +
> +#
> +# Check Point : Get Manual Address with valid parameter before the former setting finishes
> +#
> +set L_ManualListLen 1
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_READY]
> +RecordAssertion $assert $Ip6ConfigGetDataConf5AssertionGuid001 \
> + "Ip6Config.SetData - Call GetData to get manual address before the former setting finishes." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> +
> +#
> +# Make sure the former configurations succeeds
> +# (Eliminate the side-effect to other cases)
> +#
> +set i 0
> +set L_TimeOut 30
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +set assert pass
> +while { $R_Status == $EFI_NOT_READY } {
> + Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> + GetAck
> + GetVar R_Status
> + if { $R_Status == $EFI_SUCCESS } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_GETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_GETDATA_CONF5
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
> index 6c4a72b..a0acc20 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/GetData.Func1.Case1.tcl
> @@ -1,272 +1,272 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid E4CD5B45-9CF5-4938-A243-7764F1E8CDE9
> -CaseName GetData.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {GetData must succeed with valid parameters.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_GETDATA_FUNC1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_Context1
> -UINTN R_DoneEvent
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->GetData to set AltInterfaceId
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> -SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> -SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> -SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> -SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> -SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> -SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> -SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> -SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "GetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid001 \
> - "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigInterfaceId
> -if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid002 \
> - "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "GetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to set manual DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_GETDATA_FUNC1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid003 \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid004 \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_GETDATA_FUNC1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid E4CD5B45-9CF5-4938-A243-7764F1E8CDE9
> +CaseName GetData.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {GetData must succeed with valid parameters.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_GETDATA_FUNC1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_Context1
> +UINTN R_DoneEvent
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->GetData to set AltInterfaceId
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> +SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> +SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> +SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> +SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> +SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> +SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> +SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> +SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "GetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid001 \
> + "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigInterfaceId
> +if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid002 \
> + "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "GetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to set manual DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_GETDATA_FUNC1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid003 \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigGetDataFunc1AssertionGuid004 \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_GETDATA_FUNC1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
> index 918038d..9e162e7 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.inc.tcl
> @@ -1,96 +1,96 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -if {[info exist IP6CONFIG_INC] == 1} {
> - return
> -}
> -set IP6CONFIG_INC 1
> -
> -Include Include/EntsProtocolTest.inc.tcl
> -Include Include/EntsConfigure.tcl
> -Include Include/EfiBootService.inc.tcl
> -Include Include/EfiGenericService.inc.tcl
> -Include EfiUtil/EfiInclude.tcl
> -
> -Include IP6/Include/Ip6.inc.tcl
> -Include IP6Config/Include/Ip6ConfigDefine.tcl
> -Include IP6Config/Include/Ip6Config.proc.tcl
> -Include IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> -Include Include/GenericAssertionGuid.tcl
> -
> -###################################################################
> -# Function Declaration
> -###################################################################
> -Func Ip6Config->SetData {
> - UINT32
> - UINTN
> - POINTER
> - POINTER
> -}
> -
> -Func Ip6Config->GetData {
> - UINT32
> - POINTER
> - POINTER
> - POINTER
> -}
> -
> -Func Ip6Config->RegisterDataNotify {
> - UINT32
> - UINTN
> - POINTER
> -}
> -
> -Func Ip6Config->UnregisterDataNotify {
> - UINT32
> - UINTN
> - POINTER
> -}
> -
> -
> -###################################################################
> -# EFI_IP6_CONFIG_INTERFACE_INFO
> -###################################################################
> -Struct EFI_IP6_CONFIG_INTERFACE_INFO {
> - CHAR16 Name(32);
> - UINT8 IfType;
> - UINT32 HwAddressSize;
> - EFI_MAC_ADDRESS HwAddress;
> - UINT32 AddressInfoCount;
> - POINTER AddressInfo;
> - UINT32 RouteCount;
> - POINTER RouteTable;
> -}
> -
> -###################################################################
> -# EFI_IP6_CONFIG_INTERFACE_ID
> -###################################################################
> -Struct EFI_IP6_CONFIG_INTERFACE_ID {
> - UINT8 Id(8);
> -}
> -
> -###################################################################
> -# EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> -###################################################################
> -Struct EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS {
> - UINT32 DupAddrDetectTransmits;
> -}
> -
> -###################################################################
> -# EFI_IP6_CONFIG_MANUAL_ADDRESS
> -###################################################################
> -Struct EFI_IP6_CONFIG_MANUAL_ADDRESS {
> - EFI_IPv6_ADDRESS Address;
> - BOOLEAN IsAnycast;
> - UINT8 PrefixLength;
> -}
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +if {[info exist IP6CONFIG_INC] == 1} {
> + return
> +}
> +set IP6CONFIG_INC 1
> +
> +Include Include/EntsProtocolTest.inc.tcl
> +Include Include/EntsConfigure.tcl
> +Include Include/EfiBootService.inc.tcl
> +Include Include/EfiGenericService.inc.tcl
> +Include EfiUtil/EfiInclude.tcl
> +
> +Include IP6/Include/Ip6.inc.tcl
> +Include IP6Config/Include/Ip6ConfigDefine.tcl
> +Include IP6Config/Include/Ip6Config.proc.tcl
> +Include IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> +Include Include/GenericAssertionGuid.tcl
> +
> +###################################################################
> +# Function Declaration
> +###################################################################
> +Func Ip6Config->SetData {
> + UINT32
> + UINTN
> + POINTER
> + POINTER
> +}
> +
> +Func Ip6Config->GetData {
> + UINT32
> + POINTER
> + POINTER
> + POINTER
> +}
> +
> +Func Ip6Config->RegisterDataNotify {
> + UINT32
> + UINTN
> + POINTER
> +}
> +
> +Func Ip6Config->UnregisterDataNotify {
> + UINT32
> + UINTN
> + POINTER
> +}
> +
> +
> +###################################################################
> +# EFI_IP6_CONFIG_INTERFACE_INFO
> +###################################################################
> +Struct EFI_IP6_CONFIG_INTERFACE_INFO {
> + CHAR16 Name(32);
> + UINT8 IfType;
> + UINT32 HwAddressSize;
> + EFI_MAC_ADDRESS HwAddress;
> + UINT32 AddressInfoCount;
> + POINTER AddressInfo;
> + UINT32 RouteCount;
> + POINTER RouteTable;
> +}
> +
> +###################################################################
> +# EFI_IP6_CONFIG_INTERFACE_ID
> +###################################################################
> +Struct EFI_IP6_CONFIG_INTERFACE_ID {
> + UINT8 Id(8);
> +}
> +
> +###################################################################
> +# EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
> +###################################################################
> +Struct EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS {
> + UINT32 DupAddrDetectTransmits;
> +}
> +
> +###################################################################
> +# EFI_IP6_CONFIG_MANUAL_ADDRESS
> +###################################################################
> +Struct EFI_IP6_CONFIG_MANUAL_ADDRESS {
> + EFI_IPv6_ADDRESS Address;
> + BOOLEAN IsAnycast;
> + UINT8 PrefixLength;
> +}
> +
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
> index de40066..f2a2dda 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6Config.proc.tcl
> @@ -1,16 +1,16 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -if {[info exist IP6CONFIG_PROC] == 1} {
> - return
> -}
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +if {[info exist IP6CONFIG_PROC] == 1} {
> + return
> +}
> set IP6CONFIG_PROC 1
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> index 9356240..da69bf9 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigAssertionGuid.tcl
> @@ -1,84 +1,96 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -#
> -# Guid for SetData() interface
> -#
> -set Ip6ConfigSetDataConf1AssertionGuid001 7A224CCE-B79B-472a-9B8C-A47E074D5EEF
> -set Ip6ConfigSetDataConf2AssertionGuid001 46F12872-61F2-46e4-A2F9-5F685B419479
> -set Ip6ConfigSetDataConf2AssertionGuid002 1CAC93D3-732A-4e30-894D-EE63B6F486A0
> -set Ip6ConfigSetDataConf2AssertionGuid003 D005EBF3-CFD6-498a-9005-C2B3702EB4FC
> -set Ip6ConfigSetDataConf2AssertionGuid004 389806D5-4506-4319-8D17-9B4FC9D97E25
> -set Ip6ConfigSetDataConf2AssertionGuid005 5AEFDB0C-322F-49c3-9DD2-DFE21B66B308
> -set Ip6ConfigSetDataConf2AssertionGuid006 D339988F-2595-4fb5-81AE-A94DC470B234
> -set Ip6ConfigSetDataConf3AssertionGuid001 4319A43B-7641-47c0-84BB-985C479902A2
> -set Ip6ConfigSetDataConf4AssertionGuid001 01F3B344-EB52-4086-B949-55D7E4DC5BDE
> -set Ip6ConfigSetDataConf4AssertionGuid002 F612AF26-2519-497c-B205-37A2914AEE05
> -set Ip6ConfigSetDataConf4AssertionGuid003 592C1F3D-249E-4654-B4B1-600421624DD1
> -set Ip6ConfigSetDataConf5AssertionGuid001 D70BEC29-8026-4e1b-BA8B-36A313B45859
> -set Ip6ConfigSetDataConf5AssertionGuid002 FE793490-53F8-4991-8348-E624530E83E9
> -set Ip6ConfigSetDataConf5AssertionGuid003 42CCB2EF-D706-4d1a-B247-F42BBA99F707
> -set Ip6ConfigSetDataConf5AssertionGuid004 9168CB20-C891-42da-BB9F-7ADBE488B012
> -set Ip6ConfigSetDataConf5AssertionGuid005 AD058D87-1015-4b2d-A351-5BD4B0930B7B
> -set Ip6ConfigSetDataConf5AssertionGuid006 388BE3F6-D63E-4cbf-A3D9-3D941823259B
> -set Ip6ConfigSetDataConf6AssertionGuid001 2886BAE1-383A-400f-8F88-66376B2A0FF5
> -set Ip6ConfigSetDataConf7AssertionGuid001 D2C61F06-8822-4a09-89A1-7F0667FCAF0E
> -set Ip6ConfigSetDataFunc1AssertionGuid001 0A5902DA-4142-4494-AC66-2B731FFEA671
> -set Ip6ConfigSetDataFunc1AssertionGuid002 D9A9EF5E-D819-49d0-BB12-25ADEC52DDB3
> -set Ip6ConfigSetDataFunc1AssertionGuid003 14E96019-0815-4486-916C-E440E166628E
> -set Ip6ConfigSetDataFunc1AssertionGuid004 3458BBE0-0D7E-48ec-B380-2A885F44E104
> -
> -
> -#
> -# Guid for GetData() interface
> -#
> -set Ip6ConfigGetDataConf1AssertionGuid001 D15E421D-6228-4fea-8D5A-330FFF3F80D2
> -set Ip6ConfigGetDataConf2AssertionGuid001 38B36C04-12E9-4e96-B24F-C453851E6C1D
> -set Ip6ConfigGetDataConf3AssertionGuid001 D05A6C59-617F-4549-9659-4E0CFC3C3336
> -set Ip6ConfigGetDataConf3AssertionGuid002 ED45C2FE-9EC1-4553-AFA4-771E9D4F7611
> -set Ip6ConfigGetDataConf4AssertionGuid001 59118C46-2F2A-4029-ABD6-767418920369
> -set Ip6ConfigGetDataConf5AssertionGuid001 55955D09-C806-4777-9FF0-95C00E79AC28
> -set Ip6ConfigGetDataFunc1AssertionGuid001 FEAAC1A0-95BD-4dcb-91C3-9F08504BEFA1
> -set Ip6ConfigGetDataFunc1AssertionGuid002 3649D729-D6D0-456e-84AE-C7E7B8464343
> -set Ip6ConfigGetDataFunc1AssertionGuid003 165E79B4-C987-4100-8AA2-8AB115B07FAD
> -set Ip6ConfigGetDataFunc1AssertionGuid004 DB420311-17F7-40cf-A0B1-0294D5DCCC92
> -
> -#
> -# Guid for RegisterDataNotify() interface
> -#
> -set Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 7E3F6157-EC75-4ecd-A79B-4926F3AA1C0D
> -set Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 70DC8C71-C54D-4446-8AD9-BAC086E43D17
> -set Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 2D88F18B-0BEF-4616-BDE5-CA4E0086E1D3
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 9A98DC85-D018-45aa-B851-34EE2F6716D4
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 39F7FB37-9F9F-485e-8DBC-0F3191DA9909
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 D13DA599-37E7-474a-9343-83C9EFE80893
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 5428BDD5-4332-4e3b-841F-3E60540AA35D
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 1844A7C8-730C-4927-8E02-CE0A6CA08DCC
> -set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 B0E66591-9076-48e3-8DF6-2A1D59A572DB
> -
> -
> -#
> -# Guid for UnregisterDataNotify() interface
> -#
> -set Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 8AB0E5A2-A4E1-4282-87B5-E377C763AD2F
> -set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 5C68228F-AAAE-4d0b-9927-7664476EF360
> -set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 55D8193E-F58E-4800-924B-73C902098DD8
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 42EB4628-8DF6-4704-81E5-F7EAE6CBB270
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 174CEC07-E573-434b-8E99-77F8AE9C55B5
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid003 1F5EF1AF-8A19-48d6-831F-51BE00B32AA5
> -set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid004 388C8838-7790-4a1f-9DB7-5017D7AA60DB
> -
> -
> -
> -
> -
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +#
> +# Guid for SetData() interface
> +#
> +set Ip6ConfigSetDataConf1AssertionGuid001 7A224CCE-B79B-472a-9B8C-A47E074D5EEF
> +set Ip6ConfigSetDataConf2AssertionGuid001 46F12872-61F2-46e4-A2F9-5F685B419479
> +set Ip6ConfigSetDataConf2AssertionGuid002 1CAC93D3-732A-4e30-894D-EE63B6F486A0
> +set Ip6ConfigSetDataConf2AssertionGuid003 D005EBF3-CFD6-498a-9005-C2B3702EB4FC
> +set Ip6ConfigSetDataConf2AssertionGuid004 389806D5-4506-4319-8D17-9B4FC9D97E25
> +set Ip6ConfigSetDataConf2AssertionGuid005 5AEFDB0C-322F-49c3-9DD2-DFE21B66B308
> +set Ip6ConfigSetDataConf2AssertionGuid006 D339988F-2595-4fb5-81AE-A94DC470B234
> +set Ip6ConfigSetDataConf3AssertionGuid001 4319A43B-7641-47c0-84BB-985C479902A2
> +set Ip6ConfigSetDataConf4AssertionGuid001 01F3B344-EB52-4086-B949-55D7E4DC5BDE
> +set Ip6ConfigSetDataConf4AssertionGuid002 F612AF26-2519-497c-B205-37A2914AEE05
> +set Ip6ConfigSetDataConf4AssertionGuid003 592C1F3D-249E-4654-B4B1-600421624DD1
> +set Ip6ConfigSetDataConf5AssertionGuid001 D70BEC29-8026-4e1b-BA8B-36A313B45859
> +set Ip6ConfigSetDataConf5AssertionGuid002 FE793490-53F8-4991-8348-E624530E83E9
> +set Ip6ConfigSetDataConf5AssertionGuid003 42CCB2EF-D706-4d1a-B247-F42BBA99F707
> +set Ip6ConfigSetDataConf5AssertionGuid004 9168CB20-C891-42da-BB9F-7ADBE488B012
> +set Ip6ConfigSetDataConf5AssertionGuid005 AD058D87-1015-4b2d-A351-5BD4B0930B7B
> +set Ip6ConfigSetDataConf5AssertionGuid006 388BE3F6-D63E-4cbf-A3D9-3D941823259B
> +set Ip6ConfigSetDataConf6AssertionGuid001 2886BAE1-383A-400f-8F88-66376B2A0FF5
> +set Ip6ConfigSetDataConf7AssertionGuid001 D2C61F06-8822-4a09-89A1-7F0667FCAF0E
> +set Ip6ConfigSetDataFunc1AssertionGuid001 0A5902DA-4142-4494-AC66-2B731FFEA671
> +set Ip6ConfigSetDataFunc1AssertionGuid002 D9A9EF5E-D819-49d0-BB12-25ADEC52DDB3
> +set Ip6ConfigSetDataFunc1AssertionGuid003 14E96019-0815-4486-916C-E440E166628E
> +set Ip6ConfigSetDataFunc1AssertionGuid004 3458BBE0-0D7E-48ec-B380-2A885F44E104
> +
> +set Ip6ConfigSetDataFunc2AssertionGuid001 B533A7CF-6C27-421A-A816-B075E7EA4573
> +set Ip6ConfigSetDataFunc2AssertionGuid002 C816C0EE-52C0-400E-A9CC-25C263E27B04
> +set Ip6ConfigSetDataFunc2AssertionGuid003 2CF2435A-C444-4E09-BC8A-56A6F33CED9C
> +set Ip6ConfigSetDataFunc2AssertionGuid004 3B673875-4CE8-4F23-8FE1-E440376604FD
> +set Ip6ConfigSetDataFunc2AssertionGuid005 05B7BF41-9CE9-481B-B9A4-2E83AD5E89E3
> +set Ip6ConfigSetDataFunc2AssertionGuid006 4D49A668-A44D-4D69-9F20-40B7F147988E
> +set Ip6ConfigSetDataFunc2AssertionGuid007 23000969-DFDE-4B04-AD44-0844D595AA66
> +set Ip6ConfigSetDataFunc2AssertionGuid008 E444B75C-B559-48C4-8D15-8F882AC7F81E
> +set Ip6ConfigSetDataFunc2AssertionGuid009 AC649D07-2063-4045-9DAE-29B4E38E46BB
> +set Ip6ConfigSetDataFunc2AssertionGuid010 4EDBB740-405F-4E6D-A4A5-D77122D16278
> +set Ip6ConfigSetDataFunc2AssertionGuid011 D131A6D9-CCAB-4460-8402-80ED252FEB09
> +set Ip6ConfigSetDataFunc2AssertionGuid012 A5D75088-D8D3-47DD-A623-F6098DF70546
> +
> +#
> +# Guid for GetData() interface
> +#
> +set Ip6ConfigGetDataConf1AssertionGuid001 D15E421D-6228-4fea-8D5A-330FFF3F80D2
> +set Ip6ConfigGetDataConf2AssertionGuid001 38B36C04-12E9-4e96-B24F-C453851E6C1D
> +set Ip6ConfigGetDataConf3AssertionGuid001 D05A6C59-617F-4549-9659-4E0CFC3C3336
> +set Ip6ConfigGetDataConf3AssertionGuid002 ED45C2FE-9EC1-4553-AFA4-771E9D4F7611
> +set Ip6ConfigGetDataConf4AssertionGuid001 59118C46-2F2A-4029-ABD6-767418920369
> +set Ip6ConfigGetDataConf5AssertionGuid001 55955D09-C806-4777-9FF0-95C00E79AC28
> +set Ip6ConfigGetDataFunc1AssertionGuid001 FEAAC1A0-95BD-4dcb-91C3-9F08504BEFA1
> +set Ip6ConfigGetDataFunc1AssertionGuid002 3649D729-D6D0-456e-84AE-C7E7B8464343
> +set Ip6ConfigGetDataFunc1AssertionGuid003 165E79B4-C987-4100-8AA2-8AB115B07FAD
> +set Ip6ConfigGetDataFunc1AssertionGuid004 DB420311-17F7-40cf-A0B1-0294D5DCCC92
> +
> +#
> +# Guid for RegisterDataNotify() interface
> +#
> +set Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 7E3F6157-EC75-4ecd-A79B-4926F3AA1C0D
> +set Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 70DC8C71-C54D-4446-8AD9-BAC086E43D17
> +set Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 2D88F18B-0BEF-4616-BDE5-CA4E0086E1D3
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 9A98DC85-D018-45aa-B851-34EE2F6716D4
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 39F7FB37-9F9F-485e-8DBC-0F3191DA9909
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 D13DA599-37E7-474a-9343-83C9EFE80893
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 5428BDD5-4332-4e3b-841F-3E60540AA35D
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 1844A7C8-730C-4927-8E02-CE0A6CA08DCC
> +set Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 B0E66591-9076-48e3-8DF6-2A1D59A572DB
> +
> +
> +#
> +# Guid for UnregisterDataNotify() interface
> +#
> +set Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 8AB0E5A2-A4E1-4282-87B5-E377C763AD2F
> +set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 5C68228F-AAAE-4d0b-9927-7664476EF360
> +set Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 55D8193E-F58E-4800-924B-73C902098DD8
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 42EB4628-8DF6-4704-81E5-F7EAE6CBB270
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 174CEC07-E573-434b-8E99-77F8AE9C55B5
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid003 1F5EF1AF-8A19-48d6-831F-51BE00B32AA5
> +set Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid004 388C8838-7790-4a1f-9DB7-5017D7AA60DB
> +
> +
> +
> +
> +
> +
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
> index 0d78321..1fcd579 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/Include/Ip6ConfigDefine.tcl
> @@ -1,51 +1,51 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -if {[info exist IP6CONFIG_DEFINE] == 1} {
> - return
> -}
> -set IP6CONFIG_DEFINE 1
> -
> -#
> -# EUT/ENTS Connection Definition
> -#
> -#set DEF_EUT_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:0001"
> -#set DEF_EUT_MAC_ADDR [GetTargetMac]
> -#set DEF_EUT_PRT 0
> -
> -#set DEF_ENTS_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:4321"
> -#set DEF_ENTS_MAC_ADDR [GetHostMac]
> -#set DEF_ENTS_PRT 8888
> -
> -#
> -# EFI_IP6_CONFIG_DATA_TYPE
> -#
> -set IP6CDT(InterfaceInfo) 0
> -set IP6CDT(AltInterfaceId) 1
> -set IP6CDT(Policy) 2
> -set IP6CDT(DupAddrDetectTransmits) 3
> -set IP6CDT(ManualAddress) 4
> -set IP6CDT(Gateway) 5
> -set IP6CDT(DnsServer) 6
> -set IP6CDT(Maximum) 7
> -
> -#
> -# EFI_IP6_CONFIG_POLICY
> -#
> -set IP6CP(Manual) 0
> -set IP6CP(Automatic) 1
> -
> -#
> -# Timers
> -#
> -set i 0
> -set L_TimeOut 30
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +if {[info exist IP6CONFIG_DEFINE] == 1} {
> + return
> +}
> +set IP6CONFIG_DEFINE 1
> +
> +#
> +# EUT/ENTS Connection Definition
> +#
> +#set DEF_EUT_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:0001"
> +#set DEF_EUT_MAC_ADDR [GetTargetMac]
> +#set DEF_EUT_PRT 0
> +
> +#set DEF_ENTS_IP_ADDR "2002:0000:0000:0000:0000:0000:0000:4321"
> +#set DEF_ENTS_MAC_ADDR [GetHostMac]
> +#set DEF_ENTS_PRT 8888
> +
> +#
> +# EFI_IP6_CONFIG_DATA_TYPE
> +#
> +set IP6CDT(InterfaceInfo) 0
> +set IP6CDT(AltInterfaceId) 1
> +set IP6CDT(Policy) 2
> +set IP6CDT(DupAddrDetectTransmits) 3
> +set IP6CDT(ManualAddress) 4
> +set IP6CDT(Gateway) 5
> +set IP6CDT(DnsServer) 6
> +set IP6CDT(Maximum) 7
> +
> +#
> +# EFI_IP6_CONFIG_POLICY
> +#
> +set IP6CP(Manual) 0
> +set IP6CP(Automatic) 1
> +
> +#
> +# Timers
> +#
> +set i 0
> +set L_TimeOut 30
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
> index f8a97a1..aa60cb8 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf1.Case1.tcl
> @@ -1,90 +1,90 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid F76B637C-BA5F-4451-8DF4-A13E1CCAB3A0
> -CaseName RegisterDataNotify.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must not succeed when event is NULL.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->RegisterDataNotify with event NULL
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 \
> - "Ip6Config.RegisterDataNotify - Register notification event with the event NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid F76B637C-BA5F-4451-8DF4-A13E1CCAB3A0
> +CaseName RegisterDataNotify.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must not succeed when event is NULL.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->RegisterDataNotify with event NULL
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf1AssertionGuid001 \
> + "Ip6Config.RegisterDataNotify - Register notification event with the event NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
> index 3e72249..38b7431 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf2.Case1.tcl
> @@ -1,90 +1,90 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid E5221141-97BC-4e5f-9ABA-304BB11EADA0
> -CaseName RegisterDataNotify.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must not succeed when data type is not supported.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -UINTN R_Ip6ConfigDataTypeMaximum
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINTN]
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->RegisterDataNotify with the datatype not supported
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 \
> - "Ip6Config.RegisterDataNotify - Register notification event with the data type not supported." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid E5221141-97BC-4e5f-9ABA-304BB11EADA0
> +CaseName RegisterDataNotify.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must not succeed when data type is not supported.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +UINTN R_Ip6ConfigDataTypeMaximum
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINTN]
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->RegisterDataNotify with the datatype not supported
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf2AssertionGuid001 \
> + "Ip6Config.RegisterDataNotify - Register notification event with the data type not supported." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
> index 8c8363c..77d9ef5 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Conf3.Case1.tcl
> @@ -1,109 +1,109 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid B00EBD2E-F23E-434e-80E8-2A17C3BCFDFE
> -CaseName RegisterDataNotify.Conf3.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must not succeed when event has already registered.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->RegisterDataNotify with valid parameters
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event with valid parameters." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point : Call RegisterDataNotify() with the same event (has been registered)
> -#
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 \
> - "Ip6Config.RegisterDataNotify - Register notification event with the event registered already." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
> -
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid B00EBD2E-F23E-434e-80E8-2A17C3BCFDFE
> +CaseName RegisterDataNotify.Conf3.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must not succeed when event has already registered.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->RegisterDataNotify with valid parameters
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event with valid parameters." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point : Call RegisterDataNotify() with the same event (has been registered)
> +#
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyConf3AssertionGuid001 \
> + "Ip6Config.RegisterDataNotify - Register notification event with the event registered already." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
> +
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_CONF3
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
> index 38be04c..b2b777c 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case1.tcl
> @@ -1,539 +1,539 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 7D041B9B-4F68-434a-A0C6-63FDC415D078
> -CaseName RegisterDataNotify.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on one data type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Context1
> -UINTN R_DoneEvent1
> -UINTN R_Context2
> -UINTN R_DoneEvent2
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits 0
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 0
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 0 } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid parameter
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -#
> -# Register Event for Manual Address
> -#
> -SetVar R_Context2 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context2,\
> - &@R_DoneEvent2, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context2
> - if { $R_Context2 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -#
> -# Check Events for registered datatype
> -#
> -GetVar R_Context2
> -if { $R_Context2 == 1 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 \
> - "Ip6Config.RegisterDataNotify - Registered event is signaled."
> -
> -#
> -# GetData to verfiy the data setting
> -#
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get manual address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -GetVar R_Ip6ConfigManualAddress.IsAnycast
> -if { ${R_Ip6ConfigManualAddress.IsAnycast} == FALSE } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -GetVar R_Ip6ConfigManualAddress.PrefixLength
> -if { ${R_Ip6ConfigManualAddress.PrefixLength} == 64 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -GetVar R_Ip6ConfigManualAddress.Address
> -set L_ManualAddress "2002:0000:0000:0000:0000:0000:0000:5000"
> -set L_RemoteAddress [ GetIpv6Address {R_Ip6ConfigManualAddress.Address} ]
> -if { [ string compare $L_RemoteAddress $L_ManualAddress ] == 0 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 7D041B9B-4F68-434a-A0C6-63FDC415D078
> +CaseName RegisterDataNotify.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on one data type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Context1
> +UINTN R_DoneEvent1
> +UINTN R_Context2
> +UINTN R_DoneEvent2
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 0
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 0
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 0." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 0 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +#
> +# Register Event for Manual Address
> +#
> +SetVar R_Context2 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context2,\
> + &@R_DoneEvent2, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid001 \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context2
> + if { $R_Context2 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +#
> +# Check Events for registered datatype
> +#
> +GetVar R_Context2
> +if { $R_Context2 == 1 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid002 \
> + "Ip6Config.RegisterDataNotify - Registered event is signaled."
> +
> +#
> +# GetData to verfiy the data setting
> +#
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get manual address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigManualAddress.IsAnycast
> +if { ${R_Ip6ConfigManualAddress.IsAnycast} == FALSE } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +GetVar R_Ip6ConfigManualAddress.PrefixLength
> +if { ${R_Ip6ConfigManualAddress.PrefixLength} == 64 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +GetVar R_Ip6ConfigManualAddress.Address
> +set L_ManualAddress "2002:0000:0000:0000:0000:0000:0000:5000"
> +set L_RemoteAddress [ GetIpv6Address {R_Ip6ConfigManualAddress.Address} ]
> +if { [ string compare $L_RemoteAddress $L_ManualAddress ] == 0 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set ManualAddress succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent2,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent2,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
> index bd52067..6f7e51f 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/RegisterDataNotify.Func1.Case2.tcl
> @@ -1,266 +1,266 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 886AE98A-5D43-47b4-A339-85FB089F21FA
> -CaseName RegisterDataNotify.Func1.Case2
> -CaseCategory IP6Config
> -CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on two data types.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
> -#
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 [expr { $L_Context1 + 1 }]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -GetVar R_Context
> -if { $R_Context == $L_Context2 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 \
> - "Ip6Config.RegisterDataNotify - Event is signaled for DataType - Policy."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 [expr { $L_Context1 + 1 }]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -GetVar R_Context
> -if { $R_Context == $L_Context2 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 \
> - "Ip6Config.RegisterDataNotify - Event is signaled for DataType - DadXmits."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 886AE98A-5D43-47b4-A339-85FB089F21FA
> +CaseName RegisterDataNotify.Func1.Case2
> +CaseCategory IP6Config
> +CaseDescription {RegisterDataNotify must succeed with valid parameters when one event registered on two data types.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 [expr { $L_Context1 + 1 }]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +GetVar R_Context
> +if { $R_Context == $L_Context2 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid005 \
> + "Ip6Config.RegisterDataNotify - Event is signaled for DataType - Policy."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 [expr { $L_Context1 + 1 }]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +GetVar R_Context
> +if { $R_Context == $L_Context2 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid006 \
> + "Ip6Config.RegisterDataNotify - Event is signaled for DataType - DadXmits."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_REGISTERDATANOTIFY_FUNC1_CASE2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
> index 2213ec9..8c33521 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf1.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid EF4CCB73-577C-4b8c-96E3-91517F0B7056
> -CaseName SetData.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data is NULL.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->SetData with data is NULL.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,NULL,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf1AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData with Data NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -EndScope _IP6CONFIG_SETDATA_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid EF4CCB73-577C-4b8c-96E3-91517F0B7056
> +CaseName SetData.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data is NULL.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->SetData with data is NULL.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,NULL,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf1AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData with Data NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +EndScope _IP6CONFIG_SETDATA_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
> index f14a5bb..bbf7830 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf2.Case1.tcl
> @@ -1,299 +1,299 @@
> -#
> -# Copyright 2006 - 2017 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid A9BBCC37-3ED5-4c11-B6B6-BE52A1131568
> -CaseName SetData.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when one or more fields in data is invalid.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF2
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF2
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with "::"
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "::"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address (Not Unicast or Linklocal)." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point : Set Manual Address with duplication of list entries
> -#
> -set L_ManualListLen 3
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress($L_ManualListLen)
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress(0) @R_Temp_Ip6ConfigManualAddress
> -
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> -SetVar R_Ip6ConfigManualAddress(1) @R_Temp_Ip6ConfigManualAddress
> -
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress(2) @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid002 \
> - "Ip6Config.SetData - Call SetData to set manual address (duplication of list entries)." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Points : Set Gateway with "ff02::1" (multicast address)
> -#
> -set L_GatewayListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "ff02::1"
> -SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set gateway with multicast address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Gateway with duplication of list entries
> -#
> -set L_GatewayListLen 3
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway($L_GatewayListLen)
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> -SetVar R_Ip6ConfigGateway(0) @R_Temp_Ip6ConfigGateway
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> -SetVar R_Ip6ConfigGateway(1) @R_Temp_Ip6ConfigGateway
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> -SetVar R_Ip6ConfigGateway(2) @R_Temp_Ip6ConfigGateway
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid004 \
> - "Ip6Config.SetData - Call SetData to set gateway with duplication of list entries." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Dns Server with "ff02::1" (link local address)
> -#
> -set L_DnsServerListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> -EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigDnsServer "ff02::1"
> -SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid005 \
> - "Ip6Config.SetData - Call SetData to set dns server with multicast address." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -DelVar R_Ip6ConfigDnsServer
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF2
> -
> +#
> +# Copyright 2006 - 2017 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid A9BBCC37-3ED5-4c11-B6B6-BE52A1131568
> +CaseName SetData.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when one or more fields in data is invalid.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF2
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF2
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with "::"
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "::"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address (Not Unicast or Linklocal)." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point : Set Manual Address with duplication of list entries
> +#
> +set L_ManualListLen 3
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress($L_ManualListLen)
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress(0) @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> +SetVar R_Ip6ConfigManualAddress(1) @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress(2) @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid002 \
> + "Ip6Config.SetData - Call SetData to set manual address (duplication of list entries)." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Points : Set Gateway with "ff02::1" (multicast address)
> +#
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "ff02::1"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set gateway with multicast address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Gateway with duplication of list entries
> +#
> +set L_GatewayListLen 3
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway($L_GatewayListLen)
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> +SetVar R_Ip6ConfigGateway(0) @R_Temp_Ip6ConfigGateway
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway(1) @R_Temp_Ip6ConfigGateway
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5000"
> +SetVar R_Ip6ConfigGateway(2) @R_Temp_Ip6ConfigGateway
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid004 \
> + "Ip6Config.SetData - Call SetData to set gateway with duplication of list entries." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Dns Server with "ff02::1" (link local address)
> +#
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "ff02::1"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigSetDataConf2AssertionGuid005 \
> + "Ip6Config.SetData - Call SetData to set dns server with multicast address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +DelVar R_Ip6ConfigDnsServer
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
> index 84a13c6..1cfc489 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf3.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 2FCE7A2D-09F4-4c8e-97CD-68A0045E34B8
> -CaseName SetData.Conf3.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data is read-only type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF3
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point: Call Ip6Config->SetData with data is read only.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf3AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData with data is read only." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -EndScope _IP6CONFIG_SETDATA_CONF3
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 2FCE7A2D-09F4-4c8e-97CD-68A0045E34B8
> +CaseName SetData.Conf3.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data is read-only type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF3
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point: Call Ip6Config->SetData with data is read only.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(InterfaceInfo)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_INFO]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceInfo,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf3AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData with data is read only." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> +
> +EndScope _IP6CONFIG_SETDATA_CONF3
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
> index 04235cc..597fdac 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf4.Case1.tcl
> @@ -1,238 +1,238 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid D0A2D271-0BBF-4092-A61E-96FB23208DE0
> -CaseName SetData.Conf4.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data is not configurable in current policy.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF4
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF4
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF4
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set automatic policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF4
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set automatic policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address under automatic policy
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address under automatic poilcy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Points : Set Gateway under automatic policy
> -#
> -set L_GatewayListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> -SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid002 \
> - "Ip6Config.SetData - Call SetData to set gateway under automatic policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Dns Server under automatic policy
> -#
> -set L_DnsServerListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> -EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -
> -SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5001"
> -SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set dns server under automatic policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> -
> -DelVar R_Ip6ConfigDnsServer
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF4
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid D0A2D271-0BBF-4092-A61E-96FB23208DE0
> +CaseName SetData.Conf4.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data is not configurable in current policy.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF4
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF4
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF4
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set automatic policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF4
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set automatic policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address under automatic policy
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address under automatic poilcy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Points : Set Gateway under automatic policy
> +#
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid002 \
> + "Ip6Config.SetData - Call SetData to set gateway under automatic policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Dns Server under automatic policy
> +#
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5001"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_WRITE_PROTECTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf4AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set dns server under automatic policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_WRITE_PROTECTED"
> +
> +DelVar R_Ip6ConfigDnsServer
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF4
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
> index 9b7e9c1..5e5a3e1 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf5.Case1.tcl
> @@ -1,279 +1,279 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 1F1728C3-BB62-4f28-9D75-6E631F7A6833
> -CaseName SetData.Conf5.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data size does not match the data type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF5
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF5
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF5
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF5
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with wrong data size
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize 16
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Points : Set Gateway with wrong data size
> -#
> -set L_GatewayListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> -EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> -SetVar R_Ip6ConfigDataSize 8
> -
> -SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> -SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid002 \
> - "Ip6Config.SetData - Call SetData to set gateway with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -DelVar R_Ip6ConfigGateway
> -
> -#
> -# Check Point : Set Dns Server with wrong data size
> -#
> -set L_DnsServerListLen 1
> -EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> -EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> -set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> -SetVar R_Ip6ConfigDataSize 8
> -
> -SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
> -SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set dns server with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -DelVar R_Ip6ConfigDnsServer
> -
> -#
> -# Check Point : Set Altlfld with wrong data size
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -SetVar R_Ip6ConfigDataSize 1
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid004 \
> - "Ip6Config.SetData - Call SetData to set Altlfld with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -#
> -# Check Point : Set DadXmits with wrong data size
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize 1
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid005 \
> - "Ip6Config.SetData - Call SetData to set DadXmits with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -#
> -# Check Point : Set Policy with wrong data size
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize 1
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> -RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid006 \
> - "Ip6Config.SetData - Call SetData to set Policy with wrong data size." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF5
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 1F1728C3-BB62-4f28-9D75-6E631F7A6833
> +CaseName SetData.Conf5.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data size does not match the data type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF5
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF5
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF5
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF5
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with wrong data size
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize 16
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Points : Set Gateway with wrong data size
> +#
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize 8
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid002 \
> + "Ip6Config.SetData - Call SetData to set gateway with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +DelVar R_Ip6ConfigGateway
> +
> +#
> +# Check Point : Set Dns Server with wrong data size
> +#
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize 8
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set dns server with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +DelVar R_Ip6ConfigDnsServer
> +
> +#
> +# Check Point : Set Altlfld with wrong data size
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +SetVar R_Ip6ConfigDataSize 1
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid004 \
> + "Ip6Config.SetData - Call SetData to set Altlfld with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +#
> +# Check Point : Set DadXmits with wrong data size
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize 1
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid005 \
> + "Ip6Config.SetData - Call SetData to set DadXmits with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +#
> +# Check Point : Set Policy with wrong data size
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize 1
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_BAD_BUFFER_SIZE]
> +RecordAssertion $assert $Ip6ConfigSetDataConf5AssertionGuid006 \
> + "Ip6Config.SetData - Call SetData to set Policy with wrong data size." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_BAD_BUFFER_SIZE"
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF5
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
> index 0430336..0bc8880 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf6.Case1.tcl
> @@ -1,72 +1,72 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 6C5FB23E-96A5-475a-8B7E-24B9BBB99C2A
> -CaseName SetData.Conf6.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when data type is not supported.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF6
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -UINT32 R_Ip6ConfigMaximum
> -#
> -# Check Point: Call Ip6Config->SetData when data type is not supported.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximum,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf6AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData with the data type not supported." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
> -
> -EndScope _IP6CONFIG_SETDATA_CONF6
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 6C5FB23E-96A5-475a-8B7E-24B9BBB99C2A
> +CaseName SetData.Conf6.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when data type is not supported.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF6
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +UINT32 R_Ip6ConfigMaximum
> +#
> +# Check Point: Call Ip6Config->SetData when data type is not supported.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Maximum)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigMaximum,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_UNSUPPORTED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf6AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData with the data type not supported." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_UNSUPPORTED"
> +
> +EndScope _IP6CONFIG_SETDATA_CONF6
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
> index 15e118b..22b5676 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Conf7.Case1.tcl
> @@ -1,510 +1,510 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 477D07AC-6FEB-460b-BA92-A98245862D09
> -CaseName SetData.Conf7.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_CONF7
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Context1
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get policy value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set manual policy succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits 20
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point : Set Manual Address with valid parameter
> -#
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> -
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_NOT_READY } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> -
> -DelVar R_Ip6ConfigManualAddress
> -
> -#
> -# Check Point : Set Manual Address with valid parameter before the former setting finishes
> -#
> -set L_ManualListLen 1
> -EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> -set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize $L_ListLen
> -SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> -SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> -SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> -SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> -RecordAssertion $assert $Ip6ConfigSetDataConf7AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set manual address with valid parameter before the former setting finishes." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
> -
> -
> -#
> -# Make sure the former configurations succeeds
> -# (Eliminate the side-effect to other cases)
> -#
> -set i 0
> -set L_TimeOut 30
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> -GetAck
> -GetVar R_Status
> -set assert pass
> -while { $R_Status == $EFI_NOT_READY } {
> - Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> - GetAck
> - GetVar R_Status
> - if { $R_Status == $EFI_SUCCESS } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> -}
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - former SetData finishes." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -#
> -# Set automatic policy (this will clean up all address information configured)
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> -
> -SetVar R_Context 0
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - set assert pass
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Ip6ConfigPolicy
> -if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> - set assert pass
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> -
> - EndScope _IP6CONFIG_SETDATA_CONF7
> - EndLog
> -
> - return
> -}
> -
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> - "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> -
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_CONF7
> -
> -EndLog
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 477D07AC-6FEB-460b-BA92-A98245862D09
> +CaseName SetData.Conf7.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must not succeed when the last asynchronous process for the data type has not been finished yet.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_CONF7
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Context1
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 20
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_NOT_READY } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_READY"
> +
> +DelVar R_Ip6ConfigManualAddress
> +
> +#
> +# Check Point : Set Manual Address with valid parameter before the former setting finishes
> +#
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5001"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_ACCESS_DENIED]
> +RecordAssertion $assert $Ip6ConfigSetDataConf7AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set manual address with valid parameter before the former setting finishes." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_ACCESS_DENIED"
> +
> +
> +#
> +# Make sure the former configurations succeeds
> +# (Eliminate the side-effect to other cases)
> +#
> +set i 0
> +set L_TimeOut 30
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +set assert pass
> +while { $R_Status == $EFI_NOT_READY } {
> + Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> + GetAck
> + GetVar R_Status
> + if { $R_Status == $EFI_SUCCESS } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - former SetData finishes." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +#
> +# Set automatic policy (this will clean up all address information configured)
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Automatic)
> +
> +SetVar R_Context 0
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + set assert pass
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Automatic) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> +
> + EndScope _IP6CONFIG_SETDATA_CONF7
> + EndLog
> +
> + return
> +}
> +
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Set automatic policy to clean up the former configuration." \
> + "TimeUsed - $i, TimeOut Value- $L_TimeOut"
> +
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_CONF7
> +
> +EndLog
> +
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
> index 2053775..d35f104 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func1.Case1.tcl
> @@ -1,274 +1,274 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid EF8FF5B4-8855-4fbd-87C5-C28C7312302A
> -CaseName SetData.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {SetData must succeed with valid parameters.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_SETDATA_FUNC1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_Context1
> -UINTN R_DoneEvent
> -UINTN R_DoneEvent1
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set AltInterfaceId
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> -SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> -SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> -SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> -SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> -SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> -SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> -SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> -SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> - "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> - return
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigInterfaceId
> -if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid002 \
> - "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set DadXmits
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -SetVar R_Context1 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> - &@R_DoneEvent1, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context1
> - if { $R_Context1 == 1 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> - "Ip6Config.SetData - Call SetData to set manual DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_SETDATA_FUNC1
> - EndLog
> -}
> -
> -Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.GetData - Call GetData to get DadXmits value." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -GetVar R_Ip6ConfigDadTransmits
> -if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid004 \
> - "Set DadXmits succeeds(event is signaled correctly and data correct)."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_SETDATA_FUNC1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid EF8FF5B4-8855-4fbd-87C5-C28C7312302A
> +CaseName SetData.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData must succeed with valid parameters.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_FUNC1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_Context1
> +UINTN R_DoneEvent
> +UINTN R_DoneEvent1
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set AltInterfaceId
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_INTERFACE_ID]
> +SetVar R_Ip6ConfigInterfaceId.Id(0) 0
> +SetVar R_Ip6ConfigInterfaceId.Id(1) 1
> +SetVar R_Ip6ConfigInterfaceId.Id(2) 2
> +SetVar R_Ip6ConfigInterfaceId.Id(3) 3
> +SetVar R_Ip6ConfigInterfaceId.Id(4) 4
> +SetVar R_Ip6ConfigInterfaceId.Id(5) 5
> +SetVar R_Ip6ConfigInterfaceId.Id(6) 6
> +SetVar R_Ip6ConfigInterfaceId.Id(7) 7
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set AltInterfaceId." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> + return
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigInterfaceId,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get AltInterfaceId value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigInterfaceId
> +if { ${R_Ip6ConfigInterfaceId.Id(0)} == 0 && ${R_Ip6ConfigInterfaceId.Id(1)} == 1 && ${R_Ip6ConfigInterfaceId.Id(2)} == 2 && ${R_Ip6ConfigInterfaceId.Id(3)} == 3 && ${R_Ip6ConfigInterfaceId.Id(4)} == 4 && ${R_Ip6ConfigInterfaceId.Id(5)} == 5 && ${R_Ip6ConfigInterfaceId.Id(6)} == 6 && ${R_Ip6ConfigInterfaceId.Id(7)} == 7} {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid002 \
> + "Set AltInterfaceId succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +SetVar R_Context1 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context1,\
> + &@R_DoneEvent1, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context1
> + if { $R_Context1 == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to set manual DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC1
> + EndLog
> +}
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 3 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigSetDataFunc1AssertionGuid004 \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(AltInterfaceId)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent1,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +BS->CloseEvent {@R_DoneEvent1,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_SETDATA_FUNC1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
> new file mode 100644
> index 0000000..4d9ec42
> --- /dev/null
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/SetData.Func2.Case1.tcl
> @@ -0,0 +1,838 @@
> +#
> +# Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 79F40434-2684-459C-8EEB-DCFB822D93F7
> +CaseName SetData.Func2.Case1
> +CaseCategory IP6Config
> +CaseDescription {SetData to clear the configuration.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_SETDATA_FUNC2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get policy value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigPolicy
> +if { $R_Ip6ConfigPolicy == $IP6CP(Manual) } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy fails(event is signaled correctly but data is incorrect)."
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set manual policy succeeds(event is signaled correctly and data correct)."
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set DadXmits 20
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 20
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits 20." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DadXmits value." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +GetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits
> +if { ${R_Ip6ConfigDadTransmits.DupAddrDetectTransmits} == 20 } {
> + set assert pass
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits fails(event is signaled correctly but data is incorrect)."
> +
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Set DadXmits succeeds(event is signaled correctly and data correct)."
> +
> +Stall 30
> +
> +#
> +# Check Point : Set Manual Address with valid parameter
> +#
> +
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Temp_Ip6ConfigManualAddress
> +
> +set L_ManualListLen 1
> +EFI_IP6_CONFIG_MANUAL_ADDRESS R_Ip6ConfigManualAddress
> +set L_UnitLen [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_ManualListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +SetVar R_Temp_Ip6ConfigManualAddress.IsAnycast FALSE
> +SetVar R_Temp_Ip6ConfigManualAddress.PrefixLength 64
> +SetIpv6Address R_Temp_Ip6ConfigManualAddress.Address "2002::5000"
> +SetVar R_Ip6ConfigManualAddress @R_Temp_Ip6ConfigManualAddress
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid001 \
> + "SetData to set MANUAL ADDRESS fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid001 \
> + "Ip6Config.SetData - Call SetData to set MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigManualAddress
> +
> +set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigManualAddress.Address}]
> +if { [string compare $L_Proc_Ipv6Address 2002:0000:0000:0000:0000:0000:0000:5000] != 0 } {
> + puts $L_Proc_Ipv6Address
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
> +} elseif {${R_Ip6ConfigManualAddress.PrefixLength} != 64} {
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
> +
> +} elseif {${R_Ip6ConfigManualAddress.IsAnycast} != false} {
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
> +
> +} else {
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid002 \
> + "Ip6Config.SetData - Set Gateway success(event is signaled correctly and data is correct.)"
> +}
> +
> +#
> +# Clear the Manual Address
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to clear MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid003 \
> + "SetData to clear MANUAL ADDRESS fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid003 \
> + "Ip6Config.SetData - Call SetData to clear MANUAL ADDRESS." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigManualAddress,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid004 \
> + "Ip6Config.GetData - Call GetData to get Manual Address." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +#
> +# Check Point : Set Gateway with valid parameter
> +#
> +
> +set L_GatewayListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigGateway
> +EFI_IPv6_ADDRESS R_Ip6ConfigGateway
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_GatewayListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigGateway "2002::5001"
> +SetVar R_Ip6ConfigGateway @R_Temp_Ip6ConfigGateway
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid005 \
> + "Ip6Config.SetData - Call SetData to set Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid005 \
> + "SetData to set Gateway fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid005 \
> + "Ip6Config.SetData - Call SetData to set Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigGateway
> +
> +set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigGateway}]
> +if { [string compare $L_Proc_Ipv6Address 2002:0000:0000:0000:0000:0000:0000:5001] != 0 } {
> + puts $L_Proc_Ipv6Address
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid006 \
> + "Ip6Config.SetData - Set Gateway fail(event is signaled correctly but data is incorrect.)"
> +} else {
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid006 \
> + "Ip6Config.SetData - Set Gateway success(event is signaled correctly and data is correct.)"
> +}
> +
> +#
> +# Clear the Gateway
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid007 \
> + "Ip6Config.SetData - Call SetData to clear Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid007 \
> + "SetData to clear Gateway fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid007 \
> + "Ip6Config.SetData - Call SetData to clear Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Gateway)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigGateway,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid008 \
> + "Ip6Config.GetData - Call GetData to get Gateway." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +#
> +# Check Point : Set DnsServer with valid parameter
> +#
> +
> +set L_DnsServerListLen 1
> +EFI_IPv6_ADDRESS R_Temp_Ip6ConfigDnsServer
> +EFI_IPv6_ADDRESS R_Ip6ConfigDnsServer
> +set L_UnitLen [Sizeof EFI_IPv6_ADDRESS]
> +set L_ListLen [expr {$L_UnitLen * $L_DnsServerListLen}]
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +SetVar R_Ip6ConfigDataSize $L_ListLen
> +
> +SetIpv6Address R_Temp_Ip6ConfigDnsServer "2002::5002"
> +SetVar R_Ip6ConfigDnsServer @R_Temp_Ip6ConfigDnsServer
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid009 \
> + "Ip6Config.SetData - Call SetData to set DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid009 \
> + "SetData to set DnsServer fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid009 \
> + "Ip6Config.SetData - Call SetData to set DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.GetData - Call GetData to get DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +GetVar R_Ip6ConfigDnsServer
> +
> +set L_Proc_Ipv6Address [GetIpv6Address {R_Ip6ConfigDnsServer}]
> +if { [string compare $L_Proc_Ipv6Address 2002:0000:0000:0000:0000:0000:0000:5002] != 0 } {
> + set assert fail
> +
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid010 \
> + "Ip6Config.SetData - Set DnsServer fail(event is signaled correctly but data is incorrect.)"
> +} else {
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid010 \
> + "Ip6Config.SetData - Set DnsServer success(event is signaled correctly and data is correct.)"
> +}
> +
> +#
> +# Clear the DnsServer
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,0,NULL,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid011 \
> + "Ip6Config.SetData - Call SetData to clear DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == 1 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid011 \
> + "SetData to clear DnsServer fail.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid011 \
> + "Ip6Config.SetData - Call SetData to clear DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_SETDATA_FUNC2
> + EndLog
> + return
> +}
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DnsServer)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +Ip6Config->GetData "@R_Ip6ConfigDataType,&@R_Ip6ConfigDataSize,&@R_Ip6ConfigDnsServer,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigSetDataFunc2AssertionGuid012 \
> + "Ip6Config.GetData - Call GetData to get DnsServer." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +
> +EndScope _IP6CONFIG_SETDATA_FUNC2
> +
> +EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
> index a36469f..35b36ce 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf1.Case1.tcl
> @@ -1,90 +1,90 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 8B7B6AA6-2DCB-434b-9533-6346ABCC686D
> -CaseName UnregisterDataNotify.Conf1.Case1
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must not succeed when event is NULL.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set manual policy
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Config->UnregisterDataNotify with the event NULL
> -#
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with the event NULL." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 8B7B6AA6-2DCB-434b-9533-6346ABCC686D
> +CaseName UnregisterDataNotify.Conf1.Case1
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must not succeed when event is NULL.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set manual policy
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Config->UnregisterDataNotify with the event NULL
> +#
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, 0 ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_INVALID_PARAMETER]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf1AssertionGuid001 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with the event NULL." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_INVALID_PARAMETER"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
> index d41f141..7eb5808 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case1.tcl
> @@ -1,83 +1,83 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 9CE66A42-FADC-4d44-B577-B58CED8E984B
> -CaseName UnregisterDataNotify.Conf2.Case1
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must not succeed when then event has not been registered for the data type ever.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -
> -#
> -# Check Point: Call Ip6Config->UnregisterDataNotify with the event not registered
> -#
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with the event not registered." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 9CE66A42-FADC-4d44-B577-B58CED8E984B
> +CaseName UnregisterDataNotify.Conf2.Case1
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must not succeed when then event has not been registered for the data type ever.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +
> +#
> +# Check Point: Call Ip6Config->UnregisterDataNotify with the event not registered
> +#
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid001 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with the event not registered." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
> index 5608dbe..e56d26a 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Conf2.Case2.tcl
> @@ -1,99 +1,99 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel CONFORMANCE
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid EB679CF9-9A56-4a9f-B5CF-2D845B044560
> -CaseName UnregisterDataNotify.Conf2.Case2
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must not succeed when the event was registered and then unregistered for the data type.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -
> -#
> -# Check Point: Register event for Datatype - ManualAddress and then unregister it
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with correct parameters." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Unregister the event again
> -#
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event with the event has been unregistered." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> -
> -#
> -# Clean up
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel CONFORMANCE
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid EB679CF9-9A56-4a9f-B5CF-2D845B044560
> +CaseName UnregisterDataNotify.Conf2.Case2
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must not succeed when the event was registered and then unregistered for the data type.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +
> +#
> +# Check Point: Register event for Datatype - ManualAddress and then unregister it
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(ManualAddress)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_MANUAL_ADDRESS]
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with correct parameters." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Unregister the event again
> +#
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_NOT_FOUND]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyConf2AssertionGuid002 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event with the event has been unregistered." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_NOT_FOUND"
> +
> +#
> +# Clean up
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_CONF2_CASE2
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
> index 5b88510..6315fa7 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case1.tcl
> @@ -1,98 +1,98 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid 769658B4-3397-4367-8E10-C4513407FFB8
> -CaseName UnregisterDataNotify.Func1.Case1
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling signal datatype.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Create Event and RegisterDataNotify
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "IfConfig6.RegisterDataNotify() with valid parameter." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point : Call Ip6Config->UnregisterDataNotify with valid parameter
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Close event
> -#
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid 769658B4-3397-4367-8E10-C4513407FFB8
> +CaseName UnregisterDataNotify.Func1.Case1
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling signal datatype.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Create Event and RegisterDataNotify
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType, @R_DoneEvent ,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "IfConfig6.RegisterDataNotify() with valid parameter." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point : Call Ip6Config->UnregisterDataNotify with valid parameter
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid001 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Close event
> +#
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE1
> +
> EndLog
> \ No newline at end of file
> diff --git a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
> index 9f30136..cf1a374 100644
> --- a/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
> +++ b/uefi-sct/EMS/Bin/TestCase/IP6Config/UnregisterDataNotify.Func1.Case2.tcl
> @@ -1,237 +1,237 @@
> -#
> -# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> -# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> -#
> -# This program and the accompanying materials
> -# are licensed and made available under the terms and conditions of the BSD License
> -# which accompanies this distribution. The full text of the license may be found at
> -# http://opensource.org/licenses/bsd-license.php
> -#
> -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> -#
> -################################################################################
> -CaseLevel FUNCTION
> -CaseAttribute AUTO
> -CaseVerboseLevel DEFAULT
> -set reportfile report.csv
> -
> -#
> -# test case Name, category, description, GUID...
> -#
> -CaseGuid C206AA15-2F53-4860-BD78-453C4EA463B6
> -CaseName UnregisterDataNotify.Func1.Case2
> -CaseCategory IP6Config
> -CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling multiple datatype.}
> -
> -################################################################################
> -Include IP6Config/Include/Ip6Config.inc.tcl
> -
> -
> -#
> -# Begin log ...
> -#
> -BeginLog
> -
> -#
> -# BeginScope
> -#
> -BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> -
> -#
> -# Parameter Definition
> -# R_ represents "Remote EFI Side Parameter"
> -# L_ represents "Local ENTS Side Parameter"
> -#
> -UINTN R_Status
> -UINTN R_Context
> -UINTN R_DoneEvent
> -UINTN R_Ip6ConfigDataSize
> -UINT32 R_Ip6ConfigDataType
> -EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> -EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> -UINT32 R_Ip6ConfigPolicy
> -EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> -
> -#
> -# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
> -#
> -SetVar R_Context 0
> -BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> - &@R_DoneEvent, &@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "BS.CreateEvent." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Unregister the event on Datatype [Policy]
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for Datatype - Policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -#
> -# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> -SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> -SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 $L_Context1
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> -GetAck
> -GetVar R_Status
> -if { $R_Status == $EFI_SUCCESS } {
> - Stall 5
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - set assert pass
> - } else {
> - set assert fail
> - }
> - RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
> - "Ip6Config.UnregisterDataNotify - Event should not be signaled for DataType - Policy."
> -} else {
> - set assert fail
> -
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set manual policy." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -#
> -# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> -SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> -
> -GetVar R_Context
> -set L_Context1 $R_Context
> -set L_Context2 [expr { $L_Context1 + 1 }]
> -
> -Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> -GetAck
> -GetVar R_Status
> -
> -if { $R_Status == $EFI_SUCCESS } {
> - set assert pass
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -} elseif { $R_Status == $EFI_NOT_READY } {
> - set i 0
> - set L_TimeOut 30
> - while { 1 > 0 } {
> - GetVar R_Context
> - if { $R_Context == $L_Context2 } {
> - break
> - } elseif { $i == $L_TimeOut } {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> - "TIMEOUT value is $L_TimeOut (sec), "
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> - }
> - incr i
> - Stall 1
> - }
> -} else {
> - set assert fail
> - RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.SetData - Call SetData to set DadXmits." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> - SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> - Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> - GetAck
> - BS->CloseEvent {@R_DoneEvent,&@R_Status}
> - GetAck
> - EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> - EndLog
> - return
> -}
> -
> -GetVar R_Context
> -if { $R_Context == $L_Context2 } {
> - set assert pass
> -} else {
> - set assert fail
> -}
> -RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
> - "Ip6Config.RegisterDataNotify - Event should be signaled for DataType - DadXmits."
> -
> -#
> -# Clean up
> -#
> -SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> -Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> -GetAck
> -set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> -RecordAssertion $assert $GenericAssertionGuid \
> - "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> - "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> -
> -BS->CloseEvent {@R_DoneEvent,&@R_Status}
> -GetAck
> -
> -EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> -
> +#
> +# Copyright 2006 - 2010 Unified EFI, Inc.<BR>
> +# Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +################################################################################
> +CaseLevel FUNCTION
> +CaseAttribute AUTO
> +CaseVerboseLevel DEFAULT
> +set reportfile report.csv
> +
> +#
> +# test case Name, category, description, GUID...
> +#
> +CaseGuid C206AA15-2F53-4860-BD78-453C4EA463B6
> +CaseName UnregisterDataNotify.Func1.Case2
> +CaseCategory IP6Config
> +CaseDescription {UnregisterDataNotify must succeed with valid parameters when handling multiple datatype.}
> +
> +################################################################################
> +Include IP6Config/Include/Ip6Config.inc.tcl
> +
> +
> +#
> +# Begin log ...
> +#
> +BeginLog
> +
> +#
> +# BeginScope
> +#
> +BeginScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> +
> +#
> +# Parameter Definition
> +# R_ represents "Remote EFI Side Parameter"
> +# L_ represents "Local ENTS Side Parameter"
> +#
> +UINTN R_Status
> +UINTN R_Context
> +UINTN R_DoneEvent
> +UINTN R_Ip6ConfigDataSize
> +UINT32 R_Ip6ConfigDataType
> +EFI_IP6_CONFIG_INTERFACE_INFO R_Ip6ConfigInterfaceInfo
> +EFI_IP6_CONFIG_INTERFACE_ID R_Ip6ConfigInterfaceId
> +UINT32 R_Ip6ConfigPolicy
> +EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS R_Ip6ConfigDadTransmits
> +
> +#
> +# Check Point: Create Event and register it with data type [Policy] and [DadXmits]
> +#
> +SetVar R_Context 0
> +BS->CreateEvent "$EVT_NOTIFY_SIGNAL, $EFI_TPL_NOTIFY, 1, &@R_Context,\
> + &@R_DoneEvent, &@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "BS.CreateEvent." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +Ip6Config->RegisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.RegisterDataNotify - Register notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Unregister the event on Datatype [Policy]
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $Ip6ConfigUnregisterDataNotifyFunc1AssertionGuid002 \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for Datatype - Policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +#
> +# Check Point: Call Ip6Cofnig->SetData to set [Policy] and check whether the event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> +SetVar R_Ip6ConfigDataSize [Sizeof UINT32]
> +SetVar R_Ip6ConfigPolicy $IP6CP(Manual)
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 $L_Context1
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigPolicy,&@R_Status"
> +GetAck
> +GetVar R_Status
> +if { $R_Status == $EFI_SUCCESS } {
> + Stall 5
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + set assert pass
> + } else {
> + set assert fail
> + }
> + RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid003 \
> + "Ip6Config.UnregisterDataNotify - Event should not be signaled for DataType - Policy."
> +} else {
> + set assert fail
> +
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set manual policy." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +#
> +# Check Point: Call Ip6Config->SetData to set [DadXmits] and check whether the event is signaled.
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +SetVar R_Ip6ConfigDataSize [Sizeof EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS]
> +SetVar R_Ip6ConfigDadTransmits.DupAddrDetectTransmits 3
> +
> +GetVar R_Context
> +set L_Context1 $R_Context
> +set L_Context2 [expr { $L_Context1 + 1 }]
> +
> +Ip6Config->SetData "@R_Ip6ConfigDataType,@R_Ip6ConfigDataSize,&@R_Ip6ConfigDadTransmits,&@R_Status"
> +GetAck
> +GetVar R_Status
> +
> +if { $R_Status == $EFI_SUCCESS } {
> + set assert pass
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +} elseif { $R_Status == $EFI_NOT_READY } {
> + set i 0
> + set L_TimeOut 30
> + while { 1 > 0 } {
> + GetVar R_Context
> + if { $R_Context == $L_Context2 } {
> + break
> + } elseif { $i == $L_TimeOut } {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "SetData failed.(event hasn't been signaled before TIMEOUT)." \
> + "TIMEOUT value is $L_TimeOut (sec), "
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> + }
> + incr i
> + Stall 1
> + }
> +} else {
> + set assert fail
> + RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.SetData - Call SetData to set DadXmits." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> + SetVar R_Ip6ConfigDataType $IP6CDT(Policy)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> + Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> + GetAck
> + BS->CloseEvent {@R_DoneEvent,&@R_Status}
> + GetAck
> + EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> + EndLog
> + return
> +}
> +
> +GetVar R_Context
> +if { $R_Context == $L_Context2 } {
> + set assert pass
> +} else {
> + set assert fail
> +}
> +RecordAssertion $assert $Ip6ConfigRegisterDataNotifyFunc1AssertionGuid004 \
> + "Ip6Config.RegisterDataNotify - Event should be signaled for DataType - DadXmits."
> +
> +#
> +# Clean up
> +#
> +SetVar R_Ip6ConfigDataType $IP6CDT(DupAddrDetectTransmits)
> +Ip6Config->UnregisterDataNotify "@R_Ip6ConfigDataType,@R_DoneEvent,&@R_Status"
> +GetAck
> +set assert [VerifyReturnStatus R_Status $EFI_SUCCESS]
> +RecordAssertion $assert $GenericAssertionGuid \
> + "Ip6Config.UnregisterDataNotify - Unregister notification event for configuration." \
> + "ReturnStatus - $R_Status, ExpectedStatus - $EFI_SUCCESS"
> +
> +BS->CloseEvent {@R_DoneEvent,&@R_Status}
> +GetAck
> +
> +EndScope _IP6CONFIG_UNREGISTERDATANOTIFY_FUNC1_CASE2
> +
> EndLog
> \ No newline at end of file
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2018-10-12 17:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-12 8:20 [edk2-test][Patch] uefi-sct/EMS:Add the checkpoint for SetData Eric Jin
2018-10-12 8:57 ` Supreeth Venkatesh
2018-10-12 17:01 ` Jin, Eric [this message]
2018-10-13 1:55 ` Wu, Jiaxin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DA72DC7456565B47808A57108259571F636E2C50@SHSMSX103.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox