* [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool @ 2018-11-20 6:50 Lokesh B V 2018-11-20 8:45 ` Jin, Eric 2018-11-26 20:26 ` Supreeth Venkatesh 0 siblings, 2 replies; 6+ messages in thread From: Lokesh B V @ 2018-11-20 6:50 UTC (permalink / raw) To: edk2-devel, supreeth.venkatesh, eric.jin Some windows editors uses "\r\n" for line feed. While processing uefi testcase info file, the GenBin tool logic to skip line feed doesn't consider the presence of carraige return(\r) in line feed. So this results in incorrect format error. Signed-off-by: Lokesh B V <lokesh.bv@arm.com> --- uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c b/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c index 61bb35b..ce271a1 100644 --- a/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c +++ b/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c @@ -176,6 +176,7 @@ Trim ( for (Index1 = 0; Index1 < Length; Index1++) { if ((String[Index1] != ' ' ) && (String[Index1] != '\t') && + (String[Index1] != '\r') && (String[Index1] != '\n')) { break; } @@ -193,6 +194,7 @@ Trim ( for (Index1 = 0; Index1 < Length; Index1++) { if ((String[Length - 1 - Index1] != ' ' ) && (String[Length - 1 - Index1] != '\t') && + (String[Length - 1 - Index1] != '\r') && (String[Length - 1 - Index1] != '\n')) { break; } -- 2.7.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool 2018-11-20 6:50 [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool Lokesh B V @ 2018-11-20 8:45 ` Jin, Eric 2018-11-26 20:26 ` Supreeth Venkatesh 1 sibling, 0 replies; 6+ messages in thread From: Jin, Eric @ 2018-11-20 8:45 UTC (permalink / raw) To: Lokesh B V, edk2-devel@lists.01.org, supreeth.venkatesh@arm.com; +Cc: Jin, Eric Please don't forget to change the copyright info when commit patch. Reviewed-by: Eric Jin <eric.jin@intel.com> -----Original Message----- From: Lokesh B V <lokesh.bv@arm.com> Sent: Tuesday, November 20, 2018 2:50 PM To: edk2-devel@lists.01.org; supreeth.venkatesh@arm.com; Jin, Eric <eric.jin@intel.com> Cc: Lokesh B V <lokesh.bv@arm.com> Subject: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool Some windows editors uses "\r\n" for line feed. While processing uefi testcase info file, the GenBin tool logic to skip line feed doesn't consider the presence of carraige return(\r) in line feed. So this results in incorrect format error. Signed-off-by: Lokesh B V <lokesh.bv@arm.com> --- uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c b/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c index 61bb35b..ce271a1 100644 --- a/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c +++ b/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c @@ -176,6 +176,7 @@ Trim ( for (Index1 = 0; Index1 < Length; Index1++) { if ((String[Index1] != ' ' ) && (String[Index1] != '\t') && + (String[Index1] != '\r') && (String[Index1] != '\n')) { break; } @@ -193,6 +194,7 @@ Trim ( for (Index1 = 0; Index1 < Length; Index1++) { if ((String[Length - 1 - Index1] != ' ' ) && (String[Length - 1 - Index1] != '\t') && + (String[Length - 1 - Index1] != '\r') && (String[Length - 1 - Index1] != '\n')) { break; } -- 2.7.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool 2018-11-20 6:50 [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool Lokesh B V 2018-11-20 8:45 ` Jin, Eric @ 2018-11-26 20:26 ` Supreeth Venkatesh 2018-11-27 8:04 ` Lokesh Belathur Veerappa 1 sibling, 1 reply; 6+ messages in thread From: Supreeth Venkatesh @ 2018-11-26 20:26 UTC (permalink / raw) To: Lokesh Belathur Veerappa, edk2-devel@lists.01.org, eric.jin@intel.com With the latest edk2, I am getting this compilation error (even when this patch is applied). I will be looking at it tomorrow. Please check this out if you get a chance. GenBin /data/users/supreeth/supven01/work/sct_workspace/edk2/SctPkg/TestCase/UEFI/EFI/Protocol/Decompress/BlackBoxTest/Dependency/UncompressedFile2/UncompressedFile2.ini /data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/Decompress_UncompressedFile2.ucmp Error: Invalid format (Line 30) Error: Cannot generate the binary file GNUmakefile:232: recipe for target '/data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/Decompress_UncompressedFile2.ucmp' failed make: *** [/data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/Decompress_UncompressedFile2.ucmp] Error 255 build.py... : error 7000: Failed to execute command make tbuild [/data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/SctPkg/TestCase/UEFI/EFI/Protocol/Decompress/BlackBoxTest/Dependency/UncompressedFile2/UncompressedFile2] Thanks, Supreeth -----Original Message----- From: Lokesh B V <lokesh.bv@arm.com> Sent: Tuesday, November 20, 2018 12:50 AM To: edk2-devel@lists.01.org; Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>; eric.jin@intel.com Cc: Lokesh Belathur Veerappa <Lokesh.BV@arm.com> Subject: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool Some windows editors uses "\r\n" for line feed. While processing uefi testcase info file, the GenBin tool logic to skip line feed doesn't consider the presence of carraige return(\r) in line feed. So this results in incorrect format error. Signed-off-by: Lokesh B V <lokesh.bv@arm.com> --- uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c b/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c index 61bb35b..ce271a1 100644 --- a/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c +++ b/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c @@ -176,6 +176,7 @@ Trim ( for (Index1 = 0; Index1 < Length; Index1++) { if ((String[Index1] != ' ' ) && (String[Index1] != '\t') && + (String[Index1] != '\r') && (String[Index1] != '\n')) { break; } @@ -193,6 +194,7 @@ Trim ( for (Index1 = 0; Index1 < Length; Index1++) { if ((String[Length - 1 - Index1] != ' ' ) && (String[Length - 1 - Index1] != '\t') && + (String[Length - 1 - Index1] != '\r') && (String[Length - 1 - Index1] != '\n')) { break; } -- 2.7.4 IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool 2018-11-26 20:26 ` Supreeth Venkatesh @ 2018-11-27 8:04 ` Lokesh Belathur Veerappa 2018-11-27 14:37 ` Supreeth Venkatesh 0 siblings, 1 reply; 6+ messages in thread From: Lokesh Belathur Veerappa @ 2018-11-27 8:04 UTC (permalink / raw) To: Supreeth Venkatesh, edk2-devel@lists.01.org, eric.jin@intel.com Hi Supreeth, The 'GenBin' tool has to be rebuilt with this change. The GenBin tool build support is added in the patch "[edk2-test][PATCH] SctPkg/build: Add support for GenBin tool build". I will upload a single patch which includes both the changes. Please verify and merge it. Thanks, Lokesh -----Original Message----- From: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com> Sent: Tuesday, November 27, 2018 1:56 AM To: Lokesh Belathur Veerappa <Lokesh.BV@arm.com>; edk2-devel@lists.01.org; eric.jin@intel.com Cc: Lokesh Belathur Veerappa <Lokesh.BV@arm.com> Subject: RE: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool With the latest edk2, I am getting this compilation error (even when this patch is applied). I will be looking at it tomorrow. Please check this out if you get a chance. GenBin /data/users/supreeth/supven01/work/sct_workspace/edk2/SctPkg/TestCase/UEFI/EFI/Protocol/Decompress/BlackBoxTest/Dependency/UncompressedFile2/UncompressedFile2.ini /data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/Decompress_UncompressedFile2.ucmp Error: Invalid format (Line 30) Error: Cannot generate the binary file GNUmakefile:232: recipe for target '/data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/Decompress_UncompressedFile2.ucmp' failed make: *** [/data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/Decompress_UncompressedFile2.ucmp] Error 255 build.py... : error 7000: Failed to execute command make tbuild [/data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/SctPkg/TestCase/UEFI/EFI/Protocol/Decompress/BlackBoxTest/Dependency/UncompressedFile2/UncompressedFile2] Thanks, Supreeth -----Original Message----- From: Lokesh B V <lokesh.bv@arm.com> Sent: Tuesday, November 20, 2018 12:50 AM To: edk2-devel@lists.01.org; Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>; eric.jin@intel.com Cc: Lokesh Belathur Veerappa <Lokesh.BV@arm.com> Subject: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool Some windows editors uses "\r\n" for line feed. While processing uefi testcase info file, the GenBin tool logic to skip line feed doesn't consider the presence of carraige return(\r) in line feed. So this results in incorrect format error. Signed-off-by: Lokesh B V <lokesh.bv@arm.com> --- uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c b/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c index 61bb35b..ce271a1 100644 --- a/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c +++ b/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c @@ -176,6 +176,7 @@ Trim ( for (Index1 = 0; Index1 < Length; Index1++) { if ((String[Index1] != ' ' ) && (String[Index1] != '\t') && + (String[Index1] != '\r') && (String[Index1] != '\n')) { break; } @@ -193,6 +194,7 @@ Trim ( for (Index1 = 0; Index1 < Length; Index1++) { if ((String[Length - 1 - Index1] != ' ' ) && (String[Length - 1 - Index1] != '\t') && + (String[Length - 1 - Index1] != '\r') && (String[Length - 1 - Index1] != '\n')) { break; } -- 2.7.4 IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool 2018-11-27 8:04 ` Lokesh Belathur Veerappa @ 2018-11-27 14:37 ` Supreeth Venkatesh 2018-11-27 16:51 ` Lokesh Belathur Veerappa 0 siblings, 1 reply; 6+ messages in thread From: Supreeth Venkatesh @ 2018-11-27 14:37 UTC (permalink / raw) To: Lokesh Belathur Veerappa; +Cc: eric.jin@intel.com, edk2-devel@lists.01.org Lokesh, I had applied the GenBin tool rebuild patch before this. I will check again on my side but please recheck on your side. Thanks, Supreeth -----Original Message----- From: Lokesh Belathur Veerappa <Lokesh.BV@arm.com> Sent: Tuesday, November 27, 2018 2:04 AM To: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>; edk2-devel@lists.01.org; eric.jin@intel.com Subject: RE: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool Hi Supreeth, The 'GenBin' tool has to be rebuilt with this change. The GenBin tool build support is added in the patch "[edk2-test][PATCH] SctPkg/build: Add support for GenBin tool build". I will upload a single patch which includes both the changes. Please verify and merge it. Thanks, Lokesh -----Original Message----- From: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com> Sent: Tuesday, November 27, 2018 1:56 AM To: Lokesh Belathur Veerappa <Lokesh.BV@arm.com>; edk2-devel@lists.01.org; eric.jin@intel.com Cc: Lokesh Belathur Veerappa <Lokesh.BV@arm.com> Subject: RE: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool With the latest edk2, I am getting this compilation error (even when this patch is applied). I will be looking at it tomorrow. Please check this out if you get a chance. GenBin /data/users/supreeth/supven01/work/sct_workspace/edk2/SctPkg/TestCase/UEFI/EFI/Protocol/Decompress/BlackBoxTest/Dependency/UncompressedFile2/UncompressedFile2.ini /data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/Decompress_UncompressedFile2.ucmp Error: Invalid format (Line 30) Error: Cannot generate the binary file GNUmakefile:232: recipe for target '/data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/Decompress_UncompressedFile2.ucmp' failed make: *** [/data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/Decompress_UncompressedFile2.ucmp] Error 255 build.py... : error 7000: Failed to execute command make tbuild [/data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/SctPkg/TestCase/UEFI/EFI/Protocol/Decompress/BlackBoxTest/Dependency/UncompressedFile2/UncompressedFile2] Thanks, Supreeth -----Original Message----- From: Lokesh B V <lokesh.bv@arm.com> Sent: Tuesday, November 20, 2018 12:50 AM To: edk2-devel@lists.01.org; Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>; eric.jin@intel.com Cc: Lokesh Belathur Veerappa <Lokesh.BV@arm.com> Subject: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool Some windows editors uses "\r\n" for line feed. While processing uefi testcase info file, the GenBin tool logic to skip line feed doesn't consider the presence of carraige return(\r) in line feed. So this results in incorrect format error. Signed-off-by: Lokesh B V <lokesh.bv@arm.com> --- uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c b/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c index 61bb35b..ce271a1 100644 --- a/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c +++ b/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c @@ -176,6 +176,7 @@ Trim ( for (Index1 = 0; Index1 < Length; Index1++) { if ((String[Index1] != ' ' ) && (String[Index1] != '\t') && + (String[Index1] != '\r') && (String[Index1] != '\n')) { break; } @@ -193,6 +194,7 @@ Trim ( for (Index1 = 0; Index1 < Length; Index1++) { if ((String[Length - 1 - Index1] != ' ' ) && (String[Length - 1 - Index1] != '\t') && + (String[Length - 1 - Index1] != '\r') && (String[Length - 1 - Index1] != '\n')) { break; } -- 2.7.4 IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool 2018-11-27 14:37 ` Supreeth Venkatesh @ 2018-11-27 16:51 ` Lokesh Belathur Veerappa 0 siblings, 0 replies; 6+ messages in thread From: Lokesh Belathur Veerappa @ 2018-11-27 16:51 UTC (permalink / raw) To: Supreeth Venkatesh; +Cc: eric.jin@intel.com, edk2-devel@lists.01.org Hi Supreeth, The GenBin tool was not being rebuilt due to the existence of previously built intermediate binary. To resolve this, intermediate binary has to be cleaned after the build. I will upload the new patch with the this change. Thanks, Lokesh -----Original Message----- From: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com> Sent: Tuesday, November 27, 2018 8:07 PM To: Lokesh Belathur Veerappa <Lokesh.BV@arm.com> Cc: eric.jin@intel.com; edk2-devel@lists.01.org Subject: RE: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool Lokesh, I had applied the GenBin tool rebuild patch before this. I will check again on my side but please recheck on your side. Thanks, Supreeth -----Original Message----- From: Lokesh Belathur Veerappa <Lokesh.BV@arm.com> Sent: Tuesday, November 27, 2018 2:04 AM To: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>; edk2-devel@lists.01.org; eric.jin@intel.com Subject: RE: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool Hi Supreeth, The 'GenBin' tool has to be rebuilt with this change. The GenBin tool build support is added in the patch "[edk2-test][PATCH] SctPkg/build: Add support for GenBin tool build". I will upload a single patch which includes both the changes. Please verify and merge it. Thanks, Lokesh -----Original Message----- From: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com> Sent: Tuesday, November 27, 2018 1:56 AM To: Lokesh Belathur Veerappa <Lokesh.BV@arm.com>; edk2-devel@lists.01.org; eric.jin@intel.com Cc: Lokesh Belathur Veerappa <Lokesh.BV@arm.com> Subject: RE: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool With the latest edk2, I am getting this compilation error (even when this patch is applied). I will be looking at it tomorrow. Please check this out if you get a chance. GenBin /data/users/supreeth/supven01/work/sct_workspace/edk2/SctPkg/TestCase/UEFI/EFI/Protocol/Decompress/BlackBoxTest/Dependency/UncompressedFile2/UncompressedFile2.ini /data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/Decompress_UncompressedFile2.ucmp Error: Invalid format (Line 30) Error: Cannot generate the binary file GNUmakefile:232: recipe for target '/data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/Decompress_UncompressedFile2.ucmp' failed make: *** [/data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/Decompress_UncompressedFile2.ucmp] Error 255 build.py... : error 7000: Failed to execute command make tbuild [/data/users/supreeth/supven01/work/sct_workspace/edk2/Build/UefiSct/DEBUG_GCC49/AARCH64/SctPkg/TestCase/UEFI/EFI/Protocol/Decompress/BlackBoxTest/Dependency/UncompressedFile2/UncompressedFile2] Thanks, Supreeth -----Original Message----- From: Lokesh B V <lokesh.bv@arm.com> Sent: Tuesday, November 20, 2018 12:50 AM To: edk2-devel@lists.01.org; Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>; eric.jin@intel.com Cc: Lokesh Belathur Veerappa <Lokesh.BV@arm.com> Subject: [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool Some windows editors uses "\r\n" for line feed. While processing uefi testcase info file, the GenBin tool logic to skip line feed doesn't consider the presence of carraige return(\r) in line feed. So this results in incorrect format error. Signed-off-by: Lokesh B V <lokesh.bv@arm.com> --- uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c b/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c index 61bb35b..ce271a1 100644 --- a/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c +++ b/uefi-sct/SctPkg/Tools/Source/GenBin/GenBin.c @@ -176,6 +176,7 @@ Trim ( for (Index1 = 0; Index1 < Length; Index1++) { if ((String[Index1] != ' ' ) && (String[Index1] != '\t') && + (String[Index1] != '\r') && (String[Index1] != '\n')) { break; } @@ -193,6 +194,7 @@ Trim ( for (Index1 = 0; Index1 < Length; Index1++) { if ((String[Length - 1 - Index1] != ' ' ) && (String[Length - 1 - Index1] != '\t') && + (String[Length - 1 - Index1] != '\r') && (String[Length - 1 - Index1] != '\n')) { break; } -- 2.7.4 IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. ^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-11-27 16:51 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-11-20 6:50 [edk2-test][PATCH] SctPkg/Tools: Fix incorrect line ending detection by GenBin tool Lokesh B V 2018-11-20 8:45 ` Jin, Eric 2018-11-26 20:26 ` Supreeth Venkatesh 2018-11-27 8:04 ` Lokesh Belathur Veerappa 2018-11-27 14:37 ` Supreeth Venkatesh 2018-11-27 16:51 ` Lokesh Belathur Veerappa
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox