Hello Bob and Liming, Liming: > Order may not resolve the problem. Build tool needs to know their relationship, and generate the correct dependency between ASL and C source file. > If there is no dependency between them in Makefile, Makefile multiple thread build (make -jn) may break it. I agree. The patch I sent is just re-ordering the files in the "CODA_TARGET" makfefile target, putting the '.aml' file before the '.c' file. The outcome is as below in the generated Makefile: CODA_TARGET = [AbsolutePathTo]\OUTPUT\SsdtSerialTemplate.aml \ [AbsolutePathTo]\OUTPUT\AcpiSsdtSerialLibArm.lib \ For a multiple thread build, the dependency would not be respected. The patch I sent cannot work. Bob: > I meet another problem related to .asl file. In one of platforms build process, there is a step which need to compile a .asl file a .h file firstly and that .h file will be included by a module’s source code. > That step cannot be handled in edk2 build since the compilation command use different build option, so it’s done in a pre-build script. I want to make edk2 build be able to handle such case. So > together with your case, I think we may need a solution that can do: > 1. Create a module which contains the .asl file and the build option to compile that .asl file. > 2. Find a way to describe the dependency relation between the module contains .asl and the corresponding module contains .c file We have tested the solution you suggested and the build is working. We split our module in two modules: * a first one containing the '.asl' files to compile. It looks like: [Sources] SsdtSerialTemplate.asl * a second one containing the '.c' and '.h' files. It resolves the dependency on the generated '.hex' file via the 'TemplateLibClass' library class. It looks like: AcpiSsdtSerialLibArm.inf: [Sources] SourceFile1.h SourceFile1.c SourceFile2.h SourceFile2.c [LibraryClasses] TemplateLibClass [BuildOptions] *_*_*_PLATFORM_FLAGS = -I$(OUTPUT_DIR) *_*_*_PLATFORM_FLAGS = -I$(OUTPUT_DIR)$(MODULE_RELATIVE_DIR)Template/OUTPUT Our '.dsc' file build both modules like: DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtSerialLibArm/AcpiSsdtSerialLibArm.inf TemplateLibClass|DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtSerialLibArm/Template.inf This solution is working. However we have to create two modules for one single feature. Thus we need to include output files from two modules. These modules need to be correctly configured to make the build work, which I feel is not straightforward. You say you have a similar issue. Having a more intuitive and standard solution to impose a build order within a module would potentially help other people. It would also simplify their build configuration. I think having a new [SourceOrder] section in '.inf' files could avoid us to do this. We just need to create an intermediate target in the Makefile for the CODA_TARGET target. For instance, for the following order in a '.inf' file: [SourceOrder] .c # Build '.c' files first .asl # Build '.asl' second This would create the following Makefile tagets: # CODA_TARGET needs to build FIRST_TARGET, SECOND_TARGET and UNORDERED_TARGET. # We create as many targets as the number of elements in the [SourceOrder] section. CODA_TARGET = $(FIRST_TARGET) $(SECOND_TARGET) $(UNORDERED_TARGET) # Build SECOND_TARGET before UNORDERED_TARGET UNORDERED_TARGET: SECOND_TARGET # Build FIRST_TARGET before SECOND_TARGET SECOND_TARGET: FIRST_TARGET # Build the .aml first, then the .c files, then the unordered files (none here). FIRST_TARGET = $(OUTPUT_DIR)\SsdtSerialTemplate.aml SECOND_TARGET = $(OUTPUT_DIR)\AcpiSsdtSerialLibArm.lib UNORDERED_TARGET = Again, I am ok to write a prototype if this solution is acceptable to you. Regards, Pierre From: Feng, Bob C Sent: 13 November 2019 01:40 To: devel@edk2.groups.io; Pierre Gondois ; Gao, Liming ; nd Cc: Sami Mujawar Subject: RE: [edk2-devel] [PATCH v1 1/1] BaseTools: Build ASL files before C files Hi Pierre, I meet another problem related to .asl file. In one of platforms build process, there is a step which need to compile a .asl file a .h file firstly and that .h file will be included by a module’s source code. That step cannot be handled in edk2 build since the compilation command use different build option, so it’s done in a pre-build script. I want to make edk2 build be able to handle such case. So together with your case, I think we may need a solution that can do: 1. Create a module which contains the .asl file and the build option to compile that .asl file. 2. Find a way to describe the dependency relation between the module contains .asl and the corresponding module contains .c file Thanks, Bob From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of PierreGondois Sent: Tuesday, November 12, 2019 9:34 PM To: devel@edk2.groups.io; Feng, Bob C >; Gao, Liming >; nd > Cc: Sami Mujawar > Subject: Re: [edk2-devel] [PATCH v1 1/1] BaseTools: Build ASL files before C files Hello Bob and Liming, Do you think the solution suggested earlier could be acceptable? I refer to the solution below, i.e. having a new section in the ‘.inf’ files describing an extension build order. E.g.: [SourceOrder] asl c In this example, ‘.asl’ files would be built first, then ‘.c’ files, then any other files present in the modules. Among ‘.asl’ files, the order would be preserved. Same among ‘.c’ files. If this solution suits you, we can begin to do a first implementation. Regards, Pierre From: devel@edk2.groups.io > On Behalf Of Bob Feng via Groups.Io Sent: 04 November 2019 07:50 To: devel@edk2.groups.io; Pierre Gondois >; Gao, Liming > Subject: Re: [edk2-devel] [PATCH v1 1/1] BaseTools: Build ASL files before C files Hi Pierre, How do you compile 'SsdtSerialPortTemplate.asl' with the '-tc' to the .HEX file? , based on the build_rule.txt, I think the .asl output file is a .aml file. [Acpi-Source-Language-File] ?.asl, ?.Asl, ?.ASL $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.aml Thanks, Bob From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of PierreGondois Sent: Thursday, October 31, 2019 7:12 PM To: Gao; Gao, Liming >; devel@edk2.groups.io Subject: Re: [edk2-devel] [PATCH v1 1/1] BaseTools: Build ASL files before C files Hello Liming, Please find my answers marked [PIERRE] inline. >> Can you give the whole solution for this usage model? [Pierre] We are planning to modify specific values in pre-compiled AML definition blocks at run-time, and then install these AML definition blocks as SSDT tables. Instead of having multiple ASL describing the same kind of device (e.g.: a serial port), we would have one template describing this kind of device (e.g.: an ASL description of a serial port). This template would be generic for the type of device it is describing, and compiled as one standalone AML definition block. Platform specific values of this template would then be modified at run-time. >> Does it mean C source file depends on ASL file? [Pierre] Yes. To do this, we need to embed these pre-compiled AML definition blocks. The .c file doing the fix-up needs to include this template. Thus this template needs to be compiled first. The '.inf' file responsible of the fix-up looks like: [SOURCES] SsdtSerialPortTemplate.asl SerialPortFixup.c Compilation of 'SsdtSerialPortTemplate.asl' with the '-tc' option outputs a 'SsdtSerialPortTemplate.hex' file. '.hex' file's content looks like: unsigned char ssdtserialtemplate_aml_code[] = { 0x53,0x53,0x44,0x54,0xC8,0x00,0x00,0x00, /* 00000000 "SSDT...." */ ... } The 'SerialPortFixup.c' includes the '.hex' file as shown below: #include "SsdtSerialPortTemplate.hex" >> This is related to the priority of source file type. [Pierre] Yes, the 'SsdtSerialPortTemplate.asl' needs to be compiled (so that the 'SsdtSerialPortTemplate.hex' is generated) prior to the compilation of 'SerialPortFixup.c'. >> Now, there is no method to let user configure them. I suggest to introduce the generic way instead of the specific handle. [Pierre] I agree that we should have a generic way to configure the order in which the files should be compiled. A new "SourceOrder" section could be introduced. This section would describe file extensions to compile first, and their order. Unreferenced file extensions would be compiled at the end, unordered. e.g.: [SourceOrder] asl c Here, '.asl' files would be compiled first, then '.c' files. '.asl' files would remain unordered in among all '.asl' files. '.c' files would remain unordered in among all '.c' files. Any remaining files in the "Sources" section would be compiled at the end, unordered. Regards, Pierre IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you. IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.