Re: [edk2-devel] [PATCH v1 3/3] MdeModulePkg/ConSplitter: Change StdErr color to EFI_LIGHTGRAY

["Samer El-Haj-Mahmoud" <samer.el-haj-mahmoud@arm.com>]

[-- Attachment #1: Type: text/plain, Size: 15361 bytes --]

StdErr console is required to be implemented by the UEFI spec to fill in the pointers in ST (even with a stubbed protocol implementation).

So if we agree that the color of the StdErr (required but low to no usage) is impacting the serial debug prints (high usage for DEBUG targets), why do we still insist on keeping the MAGENTA color for StdErr? Yes adding PCDs would be nice for platforms to select their default colors (and it should be done for both ConOut and StdErr), but that can be added later if there is a real ask for it.

I still do not see why the original patch of simply changing StdErr default color from MAGENTA to LIGHTGRAY (and avoid all of this headache) is problematic?! Please consider the original patch so we can close on this topic and move on.

Thanks,
--Samer

From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Gao, Zhichao via groups.io
Sent: Friday, December 4, 2020 12:24 AM
To: devel@edk2.groups.io; Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>; lersek@redhat.com; gaoliming <gaoliming@byosoft.com.cn>
Cc: Wang, Jian J <jian.j.wang@intel.com>; Wu, Hao A <hao.a.wu@intel.com>; Ni, Ray <ray.ni@intel.com>; Ard Biesheuvel <Ard.Biesheuvel@arm.com>; 'Andy Lutomirski' <luto@kernel.org>
Subject: Re: [edk2-devel] [PATCH v1 3/3] MdeModulePkg/ConSplitter: Change StdErr color to EFI_LIGHTGRAY

Normal DebugLib usually outputs string debug message only. It would show at the serial device with it current attributes. ErrOut and ConOut would change the attribute. That is why the color changes.
Actually I don’t see many usage of the ErrOut. I would suggest to remove ErrOut if you’re not using it for debug output.
For the Pcds, I agree to let the consumer to choose their wonder default color. But it is better to get the MdeModulePkg maintainers’ point.

Thanks,
Zhichao

From: devel@edk2.groups.io<mailto:devel@edk2.groups.io> <devel@edk2.groups.io<mailto:devel@edk2.groups.io>> On Behalf Of Samer El-Haj-Mahmoud
Sent: Friday, December 4, 2020 9:21 AM
To: devel@edk2.groups.io<mailto:devel@edk2.groups.io>; Gao, Zhichao <zhichao.gao@intel.com<mailto:zhichao.gao@intel.com>>; lersek@redhat.com<mailto:lersek@redhat.com>; gaoliming <gaoliming@byosoft.com.cn<mailto:gaoliming@byosoft.com.cn>>
Cc: Wang, Jian J <jian.j.wang@intel.com<mailto:jian.j.wang@intel.com>>; Wu, Hao A <hao.a.wu@intel.com<mailto:hao.a.wu@intel.com>>; Ni, Ray <ray.ni@intel.com<mailto:ray.ni@intel.com>>; Ard Biesheuvel <Ard.Biesheuvel@arm.com<mailto:Ard.Biesheuvel@arm.com>>; 'Andy Lutomirski' <luto@kernel.org<mailto:luto@kernel.org>>
Subject: Re: [edk2-devel] [PATCH v1 3/3] MdeModulePkg/ConSplitter: Change StdErr color to EFI_LIGHTGRAY

It's actually all *DebugLibSerialPort :


https://github.com/tianocore/edk2-platforms/blob/master/Platform/RaspberryPi/RPi4/RPi4.dsc


DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
DebugLib|MdePkg/Library/DxeRuntimeDebugLibSerialPort/DxeRuntimeDebugLibSerialPort.inf
But I have seen this on other systems as well.




________________________________
From: gaoliming <gaoliming@byosoft.com.cn<mailto:gaoliming@byosoft.com.cn>>
Sent: Thursday, December 3, 2020, 8:11 PM
To: devel@edk2.groups.io<mailto:devel@edk2.groups.io>; Samer El-Haj-Mahmoud; zhichao.gao@intel.com<mailto:zhichao.gao@intel.com>; lersek@redhat.com<mailto:lersek@redhat.com>
Cc: 'Wang, Jian J'; 'Wu, Hao A'; 'Ni, Ray'; Ard Biesheuvel; 'Andy Lutomirski'
Subject: 回复: [edk2-devel] [PATCH v1 3/3] MdeModulePkg/ConSplitter: Change StdErr color to EFI_LIGHTGRAY

Samer:
 Does all debug message output by PeiDxeDebugLibReportStatusCode? There is not debug message to print as UefiDebugLibStdErr or UefiDebugLibConOut. Right?

Thanks
Liming
> -----邮件原件-----
> 发件人: bounce+27952+68301+4905953+8761045@groups.io<mailto:bounce+27952+68301+4905953+8761045@groups.io>
> <bounce+27952+68301+4905953+8761045@groups.io<mailto:bounce+27952+68301+4905953+8761045@groups.io>> 代表 Samer
> El-Haj-Mahmoud
> 发送时间: 2020年12月4日 8:05
> 收件人: devel@edk2.groups.io<mailto:devel@edk2.groups.io>; zhichao.gao@intel.com<mailto:zhichao.gao@intel.com>; lersek@redhat.com<mailto:lersek@redhat.com>
> 抄送: Wang, Jian J <jian.j.wang@intel.com<mailto:jian.j.wang@intel.com>>; Wu, Hao A
> <hao.a.wu@intel.com<mailto:hao.a.wu@intel.com>>; Ni, Ray <ray.ni@intel.com<mailto:ray.ni@intel.com>>; Ard Biesheuvel
> <Ard.Biesheuvel@arm.com<mailto:Ard.Biesheuvel@arm.com>>; Andy Lutomirski <luto@kernel.org<mailto:luto@kernel.org>>; Samer
> El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com<mailto:Samer.El-Haj-Mahmoud@arm.com>>
> 主题: Re: [edk2-devel] [PATCH v1 3/3] MdeModulePkg/ConSplitter: Change
> StdErr color to EFI_LIGHTGRAY
>
> Zhichao,
>
> I can understand the rationale if this is truly only for StdErr (although it would
> have been nice to allow platforms to customize the color with a PCD).
> However, I see the inconsistency in debug output with platforms I tested with.
> For example, on the RPi, with DEBUG build, and all ConOut/StdErr and
> DebugLiub using the same serial console. The serial debug starts with
> LIGHTGRAY (attached screenshot 1), until gEfiStandardErrorDeviceGuid is
> installed. At that point, the debug output switches to MAGENTA, and
> continues to do so until entering the UI or booting to UEFI Shell, where the
> color switches back to LIGHTGRAY (attached screenshot2). After that, all
> ConOut and Debug output is LIGHTGRAY . I do not really know of any actual
> StdErr output from the Shell.
>
> So, there might be a bug somewhere that causes DEBUG output to switch to
> MAGENTA and back. I am not really sure. But this inconsistency is annoying.
> Can we simply avoid this by using a consistent color for all console output? Or
> at least allow platforms to decide?
>
>
> > -----Original Message-----
> > From: devel@edk2.groups.io<mailto:devel@edk2.groups.io> <devel@edk2.groups.io<mailto:devel@edk2.groups.io>> On Behalf Of Gao,
> > Zhichao via groups.io
> > Sent: Wednesday, December 2, 2020 6:05 AM
> > To: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com<mailto:Samer.El-Haj-Mahmoud@arm.com>>;
> > devel@edk2.groups.io<mailto:devel@edk2.groups.io>; lersek@redhat.com<mailto:lersek@redhat.com>
> > Cc: Wang, Jian J <jian.j.wang@intel.com<mailto:jian.j.wang@intel.com>>; Wu, Hao A
> > <hao.a.wu@intel.com<mailto:hao.a.wu@intel.com>>; Ni, Ray <ray.ni@intel.com<mailto:ray.ni@intel.com>>; Ard Biesheuvel
> > <Ard.Biesheuvel@arm.com<mailto:Ard.Biesheuvel@arm.com>>; Andy Lutomirski <luto@kernel.org<mailto:luto@kernel.org>>
> > Subject: Re: [edk2-devel] [PATCH v1 3/3] MdeModulePkg/ConSplitter:
> > Change StdErr color to EFI_LIGHTGRAY
> >
> >
> >
> > > -----Original Message-----
> > > From: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com<mailto:Samer.El-Haj-Mahmoud@arm.com>>
> > > Sent: Tuesday, December 1, 2020 11:17 PM
> > > To: Gao, Zhichao <zhichao.gao@intel.com<mailto:zhichao.gao@intel.com>>; devel@edk2.groups.io<mailto:devel@edk2.groups.io>;
> > > lersek@redhat.com<mailto:lersek@redhat.com>
> > > Cc: Wang, Jian J <jian.j.wang@intel.com<mailto:jian.j.wang@intel.com>>; Wu, Hao A
> > > <hao.a.wu@intel.com<mailto:hao.a.wu@intel.com>>; Ni, Ray <ray.ni@intel.com<mailto:ray.ni@intel.com>>; Ard Biesheuvel
> > > <Ard.Biesheuvel@arm.com<mailto:Ard.Biesheuvel@arm.com>>; Andy Lutomirski <luto@kernel.org<mailto:luto@kernel.org>>; Samer
> > > El-Haj-Mahmoud <Samer.El-Haj- Mahmoud@arm.com<mailto:Mahmoud@arm.com>>
> > > Subject: RE: [edk2-devel] [PATCH v1 3/3] MdeModulePkg/ConSplitter:
> > > Change StdErr color to EFI_LIGHTGRAY
> > >
> > > Why does StdErr have to be a different color from ConOut? If the
> > > system redirected both streams to the same console output then that is
> > their choice.
> > > Serial DEBUG output is not a different color even if the DEBUG is
> > > redirected to the same console as ConOut and StdErr. Also, from what I
> > > have seen, StdErr does not seem to always retain this MAGENTA color
> > > later (for example, after booting a UEFI Shell?).
> >
> > Can you share the use case of StdErr? Seems when using StdErr-
> > >OutputString, the output is not always MAGENTA color. If so, it is a bug of
> > console driver.
> >
> > I am thinking of one case. The platform only have the serial port without any
> > other display device. System boots to uefi shell and run a debug build
> > application. And the app would have both print output and debug print. If
> > the color are same, the info of normal print and debug print would be mixed
> > up. I am saying StdErr output not normal DebugLib.
> >
> > Thanks,
> > Zhichao
> >
> > >
> > > Do users really care (other than being annoyed by the inconsistency of
> > "some"
> > > text showing up in purple?). Using the same color for consoles/DEBUG
> > > output by default is consistent and clean. Applications/users can
> > > always change the colors later to whatever is the preference for that
> > particular UI/CLI.
> > >
> > > Thanks,
> > > --Samer
> > >
> > >
> > > > -----Original Message-----
> > > > From: Gao, Zhichao <zhichao.gao@intel.com<mailto:zhichao.gao@intel.com>>
> > > > Sent: Monday, November 30, 2020 8:00 PM
> > > > To: devel@edk2.groups.io<mailto:devel@edk2.groups.io>; lersek@redhat.com<mailto:lersek@redhat.com>; Samer El-Haj-Mahmoud
> > > > <Samer.El-Haj-Mahmoud@arm.com<mailto:Samer.El-Haj-Mahmoud@arm.com>>
> > > > Cc: Wang, Jian J <jian.j.wang@intel.com<mailto:jian.j.wang@intel.com>>; Wu, Hao A
> > > > <hao.a.wu@intel.com<mailto:hao.a.wu@intel.com>>; Ni, Ray <ray.ni@intel.com<mailto:ray.ni@intel.com>>; Ard Biesheuvel
> > > > <Ard.Biesheuvel@arm.com<mailto:Ard.Biesheuvel@arm.com>>; Andy Lutomirski <luto@kernel.org<mailto:luto@kernel.org>>
> > > > Subject: RE: [edk2-devel] [PATCH v1 3/3] MdeModulePkg/ConSplitter:
> > > > Change StdErr color to EFI_LIGHTGRAY
> > > >
> > > > I agree the EFI_MAGENTA is not a good choose. But this may be a
> > > > different issue. Many platforms would set serial port as ConOut and
> > > > ErrOut. The different colors for them can differ the origin. I don't
> > > > think change them to the same color is a good idea.
> > > >
> > > > Thanks,
> > > > Zhichao
> > > >
> > > > > -----Original Message-----
> > > > > From: devel@edk2.groups.io<mailto:devel@edk2.groups.io> <devel@edk2.groups.io<mailto:devel@edk2.groups.io>> On Behalf Of
> > > > > Laszlo Ersek
> > > > > Sent: Wednesday, November 25, 2020 7:30 AM
> > > > > To: devel@edk2.groups.io<mailto:devel@edk2.groups.io>; samer.el-haj-mahmoud@arm.com<mailto:samer.el-haj-mahmoud@arm.com>
> > > > > Cc: Wang, Jian J <jian.j.wang@intel.com<mailto:jian.j.wang@intel.com>>; Wu, Hao A
> > > > > <hao.a.wu@intel.com<mailto:hao.a.wu@intel.com>>; Gao, Zhichao <zhichao.gao@intel.com<mailto:zhichao.gao@intel.com>>; Ni,
> > > > > Ray <ray.ni@intel.com<mailto:ray.ni@intel.com>>; Ard Biesheuvel <Ard.Biesheuvel@arm.com<mailto:Ard.Biesheuvel@arm.com>>;
> > > > > Andy Lutomirski <luto@kernel.org<mailto:luto@kernel.org>>
> > > > > Subject: Re: [edk2-devel] [PATCH v1 3/3] MdeModulePkg/ConSplitter:
> > > > > Change StdErr color to EFI_LIGHTGRAY
> > > > >
> > > > > On 11/24/20 20:15, Samer El-Haj-Mahmoud wrote:
> > > > > > ConSplitter was using EFI_LIGHTGRAY foreground color for ConOut
> > > > > > and EFI_MAGENTA for StdErr.
> > > > > >
> > > > > > This does not work all the time, and StdErr ends up showing
> > > > > > parts in MAGENTA and other parts in LIGHTGRAY. Changing StdErr
> > > > > > to LIGHTGRAY looks better and is more consistent.
> > > > > >
> > > > > > Cc: Jian J Wang <jian.j.wang@intel.com<mailto:jian.j.wang@intel.com>>
> > > > > > Cc: Hao A Wu <hao.a.wu@intel.com<mailto:hao.a.wu@intel.com>>
> > > > > > Cc: Zhichao Gao <zhichao.gao@intel.com<mailto:zhichao.gao@intel.com>>
> > > > > > Cc: Ray Ni <ray.ni@intel.com<mailto:ray.ni@intel.com>>
> > > > > > Cc: Ard Biesheuvel <Ard.Biesheuvel@arm.com<mailto:Ard.Biesheuvel@arm.com>>
> > > > > > Signed-off-by: Samer El-Haj-Mahmoud <Samer.El-Haj-
> > > > Mahmoud@arm.com<mailto:Mahmoud@arm.com>>
> > > > > > ---
> > > > > >  MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitter.c |
> 2
> > > > > > +-
> > > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git
> > > > > > a/MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitter.c
> > > > > > b/MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitter.c
> > > > > > index b090de288517..e8cd4ce120a0 100644
> > > > > > ---
> > > > > > a/MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitter.c
> > > > > > +++
> > b/MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitter.
> > > > > > +++ c
> > > > > > @@ -1476,7 +1476,7 @@ ConSplitterStdErrDriverBindingStart (
> > > > > >    // their MaxMode and QueryData should be the intersection of
> > both.
> > > > > >    //
> > > > > >    Status = ConSplitterTextOutAddDevice (&mStdErr, TextOut,
> > > > > > NULL, NULL);
> > > > > > -  ConSplitterTextOutSetAttribute (&mStdErr.TextOut,
> > > > > > EFI_TEXT_ATTR (EFI_MAGENTA, EFI_BLACK));
> > > > > > +  ConSplitterTextOutSetAttribute (&mStdErr.TextOut,
> > > > > > + EFI_TEXT_ATTR (EFI_LIGHTGRAY, EFI_BLACK));
> > > > > >
> > > > > >    return Status;
> > > > > >  }
> > > > > >
> > > > >
> > > > > I am very curious as to how this patch is going to fare, as Andy
> > > > > Lutomirski (CC'd) reported the same symptom in a Fedora bugzilla
> > > > > ticket
> > > > > 4+ years ago:
> > > > >
> > > > > https://bugzilla.redhat.com/show_bug.cgi?id=1355913
> > > > >
> > > > > As you can see in that BZ, I found the same code location, I just
> > > > > didn't feel up to starting another crusade on edk2-devel -- about
> > > > > colors even!... So I'll be watching this one now. :)
> > > > >
> > > > > Thanks
> > > > > Laszlo
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > >
> > > IMPORTANT NOTICE: The contents of this email and any attachments are
> > > confidential and may also be privileged. If you are not the intended
> > > recipient, please notify the sender immediately and do not disclose
> > > the contents to any other person, use it for any purpose, or store or
> > > copy the information in any medium. Thank you.
> >
> >
> >
> >
>
> IMPORTANT NOTICE: The contents of this email and any attachments are
> confidential and may also be privileged. If you are not the intended recipient,
> please notify the sender immediately and do not disclose the contents to any
> other person, use it for any purpose, or store or copy the information in any
> medium. Thank you.
>
>
>
>


IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

[-- Attachment #2: Type: text/html, Size: 32793 bytes --]