From: "Li, Gary (HPS SW)" <garyli@hpe.com>
To: "Ye, Ting" <ting.ye@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Fu, Siyuan" <siyuan.fu@intel.com>,
"Wu, Jiaxin" <jiaxin.wu@intel.com>,
"Li, Gary (HPS SW)" <garyli@hpe.com>
Subject: Re: [PATCH] NetworkPkg: Fix RSOD issue in Ip6Dxe
Date: Thu, 22 Sep 2016 21:52:03 +0000 [thread overview]
Message-ID: <DF4PR84MB02821236EB669404E19FDEA6C0C90@DF4PR84MB0282.NAMPRD84.PROD.OUTLOOK.COM> (raw)
In-Reply-To: <BC0C045B0E2A584CA4575E779FA2C12A17E738CC@SHSMSX103.ccr.corp.intel.com>
Hi Ting,
This issue can be reproduce by switching POST hotkey quickly and repeatedly.
Regards,
Gary Li
Platform SW Engineering
Servers
Office: +886 (2) 8722 9977
-----Original Message-----
From: Ye, Ting [mailto:ting.ye@intel.com]
Sent: Thursday, September 22, 2016 4:48 PM
To: Li, Gary (HPS SW) <garyli@hpe.com>; edk2-devel@lists.01.org
Cc: Fu, Siyuan <siyuan.fu@intel.com>; Wu, Jiaxin <jiaxin.wu@intel.com>
Subject: RE: [edk2] [PATCH] NetworkPkg: Fix RSOD issue in Ip6Dxe
Hi Gary,
Do you mind sharing more details about how to reproduce this issue? We are not clear why this would happen.
It seems the code should continue executing the previous Ip6NdFasterTimerTicking function rather than dispatching the new timer event.
Thanks,
Ye Ting
-----Original Message-----
From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Gary Li
Sent: Thursday, September 22, 2016 2:38 PM
To: edk2-devel@lists.01.org
Cc: Ye, Ting <ting.ye@intel.com>; Fu, Siyuan <siyuan.fu@intel.com>; Wu, Jiaxin <jiaxin.wu@intel.com>
Subject: [edk2] [PATCH] NetworkPkg: Fix RSOD issue in Ip6Dxe
Avoid the Ip6NdFasterTimerTicking is executed again before the previous Ip6NdFasterTimerTicking is done.
When user presses hotkey between the below line, it makes the Ip6NdFasterTimerTicking is dispatched again before the previous Ip6NdFasterTimerTicking is done.
Therefore, the DelayNode node will be removed twice.
DelayNode = NET_LIST_USER_STRUCT (Entry2, IP6_DELAY_JOIN_LIST, Link); ...
RemoveEntryList (&DelayNode->Link);
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Li <garyli@hpe.com>
---
NetworkPkg/Ip6Dxe/Ip6Nd.c | 31 +++++++++++++++++++++----------
1 file changed, 21 insertions(+), 10 deletions(-)
diff --git a/NetworkPkg/Ip6Dxe/Ip6Nd.c b/NetworkPkg/Ip6Dxe/Ip6Nd.c index a3f49bb..d400d7c 100644
--- a/NetworkPkg/Ip6Dxe/Ip6Nd.c
+++ b/NetworkPkg/Ip6Dxe/Ip6Nd.c
@@ -2,6 +2,7 @@
Implementation of Neighbor Discovery support routines.
Copyright (c) 2009 - 2016, Intel Corporation. All rights reserved.<BR>
+ (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License @@ -16,6 +17,7 @@ #include "Ip6Impl.h"
EFI_MAC_ADDRESS mZeroMacAddress;
+BOOLEAN mIsInIp6NdFasterTimerTicking = FALSE;
/**
Update the ReachableTime in IP6 service binding instance data, in milliseconds.
@@ -2774,6 +2776,12 @@ Ip6NdFasterTimerTicking (
IP6_SERVICE *IpSb;
BOOLEAN Flag;
+ if (!mIsInIp6NdFasterTimerTicking) {
+ mIsInIp6NdFasterTimerTicking = TRUE; } else {
+ return;
+ }
+
IpSb = (IP6_SERVICE *) Context;
NET_CHECK_SIGNATURE (IpSb, IP6_SERVICE_SIGNATURE);
@@ -2848,7 +2856,7 @@ Ip6NdFasterTimerTicking (
NULL
);
if (EFI_ERROR (Status)) {
- return;
+ goto Exit;
}
DupAddrDetect->Transmit++;
@@ -2896,7 +2904,7 @@ Ip6NdFasterTimerTicking (
Ip6CreateSNMulticastAddr (&NeighborCache->Neighbor, &Destination);
Status = Ip6SelectSourceAddress (IpSb, &NeighborCache->Neighbor, &Source);
if (EFI_ERROR (Status)) {
- return;
+ goto Exit;
}
Status = Ip6SendNeighborSolicit ( @@ -2907,7 +2915,7 @@ Ip6NdFasterTimerTicking (
&IpSb->SnpMode.CurrentAddress
);
if (EFI_ERROR (Status)) {
- return;
+ goto Exit;
}
}
@@ -2934,7 +2942,7 @@ Ip6NdFasterTimerTicking (
NULL
);
if (EFI_ERROR (Status)) {
- return;
+ goto Exit;
}
}
@@ -2965,7 +2973,7 @@ Ip6NdFasterTimerTicking (
NULL
);
if (EFI_ERROR (Status)) {
- return;
+ goto Exit;
}
} else {
NeighborCache->State = EfiNeighborStale; @@ -2986,7 +2994,7 @@ Ip6NdFasterTimerTicking (
//
Status = Ip6SelectSourceAddress (IpSb, &NeighborCache->Neighbor, &Source);
if (EFI_ERROR (Status)) {
- return;
+ goto Exit;
}
Status = Ip6SendNeighborSolicit ( @@ -2997,7 +3005,7 @@ Ip6NdFasterTimerTicking (
&IpSb->SnpMode.CurrentAddress
);
if (EFI_ERROR (Status)) {
- return;
+ goto Exit;
}
NeighborCache->Transmit--;
@@ -3023,7 +3031,7 @@ Ip6NdFasterTimerTicking (
//
Status = Ip6SelectSourceAddress (IpSb, &NeighborCache->Neighbor, &Source);
if (EFI_ERROR (Status)) {
- return;
+ goto Exit;
}
Status = Ip6SendNeighborSolicit ( @@ -3034,7 +3042,7 @@ Ip6NdFasterTimerTicking (
&IpSb->SnpMode.CurrentAddress
);
if (EFI_ERROR (Status)) {
- return;
+ goto Exit;
}
}
@@ -3061,7 +3069,7 @@ Ip6NdFasterTimerTicking (
NULL
);
if (EFI_ERROR (Status)) {
- return;
+ goto Exit;
}
}
@@ -3071,6 +3079,9 @@ Ip6NdFasterTimerTicking (
break;
}
}
+
+Exit:
+ mIsInIp6NdFasterTimerTicking = FALSE;
}
/**
--
2.7.2.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
next prev parent reply other threads:[~2016-09-22 21:52 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-22 6:38 [PATCH] NetworkPkg: Fix RSOD issue in Ip6Dxe Gary Li
2016-09-22 8:47 ` Ye, Ting
2016-09-22 21:52 ` Li, Gary (HPS SW) [this message]
2016-09-23 2:51 ` Wu, Jiaxin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DF4PR84MB02821236EB669404E19FDEA6C0C90@DF4PR84MB0282.NAMPRD84.PROD.OUTLOOK.COM \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox