public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Pethaiyan, Madhan" <madhan.pethaiyan@intel.com>
To: gaoliming <gaoliming@byosoft.com.cn>,
	"Kinney, Michael D" <michael.d.kinney@intel.com>,
	"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Liu, Zhiguang" <zhiguang.liu@intel.com>,
	"Li, Yi1" <yi1.li@intel.com>, 'GuoX Xu' <guox.xu@intel.com>
Subject: Re: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details
Date: Mon, 13 May 2024 12:09:31 +0000	[thread overview]
Message-ID: <DM4PR11MB5295B769F33E96EBBD7156E999E22@DM4PR11MB5295.namprd11.prod.outlook.com> (raw)
In-Reply-To: <062701da80ac$bfad0b10$3f072130$@byosoft.com.cn>

Hi all ,

I had created EDK2 PR, few weeks ago, thought it will be reviewed and approved . Please help to check and approve. 

https://github.com/tianocore/edk2/pull/5584
https://github.com/tianocore/edk2/pull/5586
https://github.com/tianocore/edk2/pull/5587

Thanks,
P. Madhan

-----Original Message-----
From: gaoliming <gaoliming@byosoft.com.cn> 
Sent: Thursday, March 28, 2024 6:41 AM
To: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>; devel@edk2.groups.io
Cc: Liu, Zhiguang <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; 'GuoX Xu' <guox.xu@intel.com>
Subject: 回复: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details

Madhan:
  I have no comments for this patch set. Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
  
  Have you create Edk2 PR to verify the changes?

Thanks
Liming
> -----邮件原件-----
> 发件人: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>
> 发送时间: 2024年3月14日 16:17
> 收件人: Kinney, Michael D <michael.d.kinney@intel.com>; 
> devel@edk2.groups.io
> 抄送: Liming Gao <gaoliming@byosoft.com.cn>; Liu, Zhiguang 
> <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; GuoX Xu 
> <guox.xu@intel.com>
> 主题: RE: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo 
> description details
> 
> Hi Mike ,
> 
> I had raised new code review addressing the coding standard errors and
those
> were not part of my change any way ..
> 
> Thanks,
> P. Madhan
> 
> -----Original Message-----
> From: Kinney, Michael D <michael.d.kinney@intel.com>
> Sent: Sunday, March 10, 2024 1:47 AM
> To: devel@edk2.groups.io; Pethaiyan, Madhan 
> <madhan.pethaiyan@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>; Liu, Zhiguang 
> <zhiguang.liu@intel.com>; Li, Yi1 <yi1.li@intel.com>; GuoX Xu 
> <guox.xu@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>
> Subject: RE: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , 
> GetImageInfo description details
> 
> Hi Madhan,
> 
> I created a PR with all 3 related patches to run through EDK II CI.
> 
> https://github.com/tianocore/edk2/pull/5453
> 
> There are CI failures.  Please resolve and send updated patches.
> 
> Thanks,
> 
> Mike
> 
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of 
> > Pethaiyan Madhan
> > Sent: Friday, March 8, 2024 3:17 PM
> > To: devel@edk2.groups.io
> > Cc: Pethaiyan, Madhan <madhan.pethaiyan@intel.com>; Kinney, Michael 
> > D <michael.d.kinney@intel.com>; Liming Gao 
> > <gaoliming@byosoft.com.cn>; Liu, Zhiguang <zhiguang.liu@intel.com>; 
> > Li, Yi1 <yi1.li@intel.com>; GuoX Xu <guox.xu@intel.com>
> > Subject: [edk2-devel] [PATCH V1] MdePkg: Update GetImage , 
> > GetImageInfo description details
> >
> > 1.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():
> > Add the following sentence at the end of the Image parameter 
> > description. "May be NULL with a zero ImageSize in order to 
> > determine the size of the buffer needed".
> >
> > Modify the description of "EFI_INVALID_PARAMETER" return code as 
> > "The ImageSize is not too small and Image is NULL."
> >
> > 2.For EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImageInfo():
> > Add the following sentence at the end of the ImageInfo parameter 
> > description."May be NULL with a zero ImageInfoSize in order to 
> > determine the size of the buffer needed".
> >
> > Modify the description of "EFI_INVALID_PARAMETER" return code as 
> > "The ImageInfoSize is not too small and Image is NULL." and add new 
> > descriptions for "EFI_INVALID_PARAMETER" return code.
> >
> >  REF: UEFI spec v2.10 23.1.2
> >  REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4660
> >
> > Cc: Michael D Kinney <michael.d.kinney@intel.com>
> > Cc: Liming Gao <gaoliming@byosoft.com.cn>
> > Cc: Zhiguang Liu <zhiguang.liu@intel.com>
> > Cc: Yi Li <yi1.li@intel.com>
> > Cc: GuoX Xu <guox.xu@intel.com>
> > Signed-off-by: Pethaiyan Madhan <madhan.pethaiyan@intel.com>
> > ---
> >  MdePkg/Include/Protocol/FirmwareManagement.h | 14 ++++++++++++--
> >  1 file changed, 12 insertions(+), 2 deletions(-)
> >
> > diff --git a/MdePkg/Include/Protocol/FirmwareManagement.h
> > b/MdePkg/Include/Protocol/FirmwareManagement.h
> > index e535bb697d..90b7d83c8f 100644
> > --- a/MdePkg/Include/Protocol/FirmwareManagement.h
> > +++ b/MdePkg/Include/Protocol/FirmwareManagement.h
> > @@ -294,6 +294,8 @@ EFI_STATUS
> >                                       to contain the image(s) 
> > information if the buffer was too small.
> >    @param[in, out] ImageInfo          A pointer to the buffer in which
> > firmware places the current image(s)
> >                                       information. The
> information is
> > an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.
> > +                                     May be NULL with a zero
> > ImageInfoSize in order to determine the size of the
> > +                                     buffer needed.
> >    @param[out]     DescriptorVersion  A pointer to the location in
> > which firmware returns the version number
> >                                       associated with the 
> > EFI_FIRMWARE_IMAGE_DESCRIPTOR.
> >    @param[out]     DescriptorCount    A pointer to the location in
> > which firmware returns the number of @@ -314,7 +316,12 @@ EFI_STATUS
> >    @retval EFI_SUCCESS                The device was successfully
> > updated with the new image.
> >    @retval EFI_BUFFER_TOO_SMALL       The ImageInfo buffer was
> too
> > small. The current buffer size
> >                                       needed to hold the image(s) 
> > information is returned in ImageInfoSize.
> > -  @retval EFI_INVALID_PARAMETER      ImageInfoSize is NULL.
> > +  @retval EFI_INVALID_PARAMETER      ImageInfoSize is not too small
> > and ImageInfo is NULL.
> > +  @retval EFI_INVALID_PARAMETER      ImageInfoSize is non-zero and
> > DescriptorVersion is NULL.
> > +  @retval EFI_INVALID_PARAMETER      ImageInfoSize is non-zero and
> > DescriptorCount is NULL.
> > +  @retval EFI_INVALID_PARAMETER      ImageInfoSize is non-zero and
> > DescriptorSize is NULL.
> > +  @retval EFI_INVALID_PARAMETER      ImageInfoSize is non-zero and
> > PackageVersion is NULL.
> > +  @retval EFI_INVALID_PARAMETER      ImageInfoSize is non-zero and
> > PackageVersionName is NULL.
> >    @retval EFI_DEVICE_ERROR           Valid information could not
> be
> > returned. Possible corrupted image.
> >
> >  **/
> > @@ -341,6 +348,9 @@ EFI_STATUS
> >    @param[in]      ImageIndex     A unique number identifying the
> > firmware image(s) within the device.
> >                                   The number is between 1 and 
> > DescriptorCount.
> >    @param[out]     Image          Points to the buffer where the
> > current image is copied to.
> > +                                 May be NULL with a zero
> ImageSize in
> > order to determine the size of the
> > +                                 buffer needed.
> > +
> >    @param[in, out] ImageSize      On entry, points to the size of the
> > buffer pointed to by Image, in bytes.
> >                                   On return, points to the length of 
> > the image, in bytes.
> >
> > @@ -348,7 +358,7 @@ EFI_STATUS
> >    @retval EFI_BUFFER_TOO_SMALL   The buffer specified by ImageSize
> is
> > too small to hold the
> >                                   image. The current buffer size 
> > needed to hold the image is returned
> >                                   in ImageSize.
> > -  @retval EFI_INVALID_PARAMETER  The Image was NULL.
> > +  @retval EFI_INVALID_PARAMETER  The ImageSize is not too small and
> > Image is NULL.
> >    @retval EFI_NOT_FOUND          The current image is not copied
> to
> > the buffer.
> >    @retval EFI_UNSUPPORTED        The operation is not supported.
> >    @retval EFI_SECURITY_VIOLATION The operation could not be
> performed
> > due to an authentication failure.
> > --
> > 2.38.1.windows.1
> >
> >
> >
> > 
> >





-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#118868): https://edk2.groups.io/g/devel/message/118868
Mute This Topic: https://groups.io/mt/106075537/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-



  reply	other threads:[~2024-05-13 15:43 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-08 23:16 [edk2-devel] [PATCH V1] MdePkg: Update GetImage , GetImageInfo description details Pethaiyan Madhan
2024-03-09 19:34 ` Michael D Kinney
2024-03-09 20:17 ` Michael D Kinney
2024-03-14  8:16   ` Pethaiyan, Madhan
2024-03-26  5:51     ` Pethaiyan, Madhan
2024-03-28  1:10     ` 回复: " gaoliming via groups.io
2024-05-13 12:09       ` Pethaiyan, Madhan [this message]
2024-05-13 13:11         ` gaoliming via groups.io

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DM4PR11MB5295B769F33E96EBBD7156E999E22@DM4PR11MB5295.namprd11.prod.outlook.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox