Re: [EXTERNAL] [edk2-devel] EDK2 environment setup

["Guomin Jiang" <guomin.jiang@intel.com>]

[-- Attachment #1.1: Type: text/plain, Size: 7560 bytes --]

It is known issue and can refer https://bugzilla.tianocore.org/show_bug.cgi?id=2637 for detail.

It have been fixed in newest repository, you can update to the newest repository and try again.

From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Navdeeppal.Singh@dell.com
Sent: Tuesday, April 28, 2020 5:15 PM
To: spbrogan@outlook.com; devel@edk2.groups.io; sean.brogan@microsoft.com; Bret.Barkelew@microsoft.com; jim.slaughter@sage-micro.com
Subject: Re: [EXTERNAL] [edk2-devel] EDK2 environment setup


Hi,

Yes I am using edksetup.bat.

I was able to fix VFR compiler after making path changes.

And I was able to build MdeModulePkg Successfully.

But while building Emulator Pkg. I see the following Linker Error. Do I need to build some other module before building Emulator Pkg.



[cid:image001.jpg@01D61D83.5E9F0750]



Regards,

Navdeep

-----Original Message-----
From: Sean Brogan <spbrogan@outlook.com<mailto:spbrogan@outlook.com>>
Sent: Tuesday, April 28, 2020 2:28 AM
To: devel@edk2.groups.io<mailto:devel@edk2.groups.io>; Singh, Navdeeppal; sean.brogan@microsoft.com<mailto:sean.brogan@microsoft.com>; Bret.Barkelew@microsoft.com<mailto:Bret.Barkelew@microsoft.com>; jim.slaughter@sage-micro.com<mailto:jim.slaughter@sage-micro.com>
Subject: Re: [EXTERNAL] [edk2-devel] EDK2 environment setup





[EXTERNAL EMAIL]



Are you using edksetup.bat?  I would have expected this code to set the path for you.

https://github.com/tianocore/edk2/blob/master/BaseTools/toolsetup.bat#L134

  So without more logs i don't know.







If you want to use "stuart" (my preferred method) I have a commit here for EmulatorPkg which has a platformbuild.py and readme.md that describes the process.  This should be committed to edk2 master this week to enable Platform CI for every PR.



Here is the readme and details.

https://github.com/spbrogan/edk2/tree/PlatformAndCoreCIForOvmfArmVirtEmulatorPackages_v10/EmulatorPkg/PlatformCI



Here is the commit you should cherry-pick if you want to try it.



https://github.com/spbrogan/edk2/commit/8bdb9075b52a9d1c196b068729eefd76f068d0a2







Thanks

Sean







On 4/27/2020 1:26 AM, Navdeeppal.Singh@dell.com<mailto:Navdeeppal.Singh@dell.com> wrote:

> Hi,

>

> Thanks for your help.

>

> I am to build base tools and able to generate bin files.

>

> "Build" command is generated.

>

> Later, I am trying to build "EmulatorPkg".

>

> And running into VfrCompile error.

>

> 'VfrCompile' is not recognized as an internal or external command,

>

> operable program or batch file.

>

> NMAKE : fatal error U1077: '"VfrCompile' : return code '0x1'

>

> Stop.

>

> 'VfrCompile' is not recognized as an internal or external command,

>

> operable program or batch file.

>

> I can see VfrCompile.exe generated in "BaseTools".

>

> Attached build log for "Emulator Pkg".

>

> I tried checking the Env Paths .

>

> Regards,

>

> Navdeep

>

> *From:* Sean Brogan <sean.brogan@microsoft.com<mailto:sean.brogan@microsoft.com>>

> *Sent:* Friday, April 24, 2020 12:33 AM

> *To:* devel@edk2.groups.io<mailto:devel@edk2.groups.io>; Singh, Navdeeppal; Bret Barkelew;

> jim.slaughter@sage-micro.com<mailto:jim.slaughter@sage-micro.com>

> *Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup

>

> [EXTERNAL EMAIL]

>

> Navdeep,

>

> Yes since the 202002 stable tag there have been submodules introduced

> to the basetools.  If you look closely you will see in the CI process

> this required a change where stuart_setup is run before calling

> edk2toolsbuild.py.

>

> https://github.com/tianocore/edk2/commit/e1fbff3ded87704fb0086f9b5fb36

> 8080eb4db51#diff-6973939bf9ad6f6a3082d99ce3b32ff1

>

> If you are using "stuart" to build then that is the suggested path as

> stuar_setup will init your submodules listed in the RequiredSubmodules

> (https://github.com/tianocore/edk2/blob/master/.pytool/CISettings.py#L136).

> Given that the edk2 project and ecosystem has numerous ways to setup

> your environment and build, you can also just make sure your workspace

> is complete prior to running Edk2ToolsBuild.py.  In this case you only

> need to run "git submodule update --init"

>

> I just did this and it works fine with VS2019.

>

> Jim,

>

> Just as fyi as I know there are lots of reasons for toolchain selection.

>

> I believe the Visual studio build tools are available free of charge

> (not the IDE but the compilers).   Directions here.

> https://microsoft.github.io/mu/CodeDevelopment/prerequisites/#visual-s

> tudio-2019-preferred

>

> Thanks

>

> Sean

>

> *From:* devel@edk2.groups.io<mailto:devel@edk2.groups.io> <mailto:devel@edk2.groups.io>

> <devel@edk2.groups.io <mailto:devel@edk2.groups.io<mailto:devel@edk2.groups.io%20%3cmailto:devel@edk2.groups.io>>> *On Behalf Of

> *Navdeeppal.Singh via groups.io

> *Sent:* Thursday, April 23, 2020 9:14 AM

> *To:* Bret Barkelew <Bret.Barkelew@microsoft.com

> <mailto:Bret.Barkelew@microsoft.com>>; devel@edk2.groups.io<mailto:devel@edk2.groups.io>

> <mailto:devel@edk2.groups.io>

> *Subject:* Re: [EXTERNAL] [edk2-devel] EDK2 environment setup

>

> Hi Bret,

>

> Yes PIP requirements are up to date.

>

> On further digging through the logging file BASETOOLS_BUILD.txt.

>

> INFO - subprocess not exit successfully

>

> INFO - Error while execute command 'nmake all' in direcotry

> C:\edk2\BaseTools\Source\C\BrotliCompress

>

> Regards,

>

> Navdeep

>

> *From:* Bret Barkelew <Bret.Barkelew@microsoft.com

> <mailto:Bret.Barkelew@microsoft.com>>

> *Sent:* Thursday, April 23, 2020 9:37 PM

> *To:* devel@edk2.groups.io<mailto:devel@edk2.groups.io> <mailto:devel@edk2.groups.io>; Singh,

> Navdeeppal

> *Subject:* RE: [EXTERNAL] [edk2-devel] EDK2 environment setup

>

> [EXTERNAL EMAIL]

>

> Have you installed the up-to-date Python requirements? "pip install

> -upgrade -r pip-requirements.txt"?

>

> That's the first thing I would check. Otherwise, happy to look at the

> problem with you.

>

> - Bret

>

> *From: *NAVDEEPPAL_SINGH via groups.io

> <mailto:NAVDEEPPAL_SINGH=DELL.COM@groups.io>

> *Sent: *Thursday, April 23, 2020 6:05 AM

> *To: *devel@edk2.groups.io<mailto:*devel@edk2.groups.io> <mailto:devel@edk2.groups.io>

> *Subject: *[EXTERNAL] [edk2-devel] EDK2 environment setup

>

> I am trying to setup EDK2 environment setup from Tianocore/EDK2.

> While doing the Base Tool setup. After running

> BaseTool/EDK2ToolsBuild.py -t VS2019 Getting following error :-

> c:\edk2\BaseTools>python Edk2ToolsBuild.py  -t VS2019 SECTION - Init

> SDE SECTION - Loading Plugins SECTION - Start Invocable Tool Traceback

> (most recent call last):

>    File "Edk2ToolsBuild.py", line 177, in <module>

>      main()

>    File "Edk2ToolsBuild.py", line 173, in main

>      Edk2ToolsBuild().Invoke()

>    File "C:\Program

> Files\Python38\lib\site-packages\edk2toolext\base_abstract_invocable.p

> y", line 141, in Invoke

>      retcode = self.Go()

>    File "Edk2ToolsBuild.py", line 139, in Go

>      raise Exception("Failed to build.")

> Exception: Failed to build.

>

> set EDK_TOOLS_PATH=C:\edk2\BaseTools

> set EDK_TOOLS_BIN=C:\edk2\BaseTools\Bin\Win32

> Can some one help

>


[-- Attachment #1.2: Type: text/html, Size: 20971 bytes --]

[-- Attachment #2: image001.jpg --]
[-- Type: image/jpeg, Size: 190382 bytes --]