Re: [edk2-devel] [PATCH v1 1/2] Add the volatile keyword to NvmExpressDxe's Passthru CQs and SQs.

["Wu, Hao A" <hao.a.wu@intel.com>]

Thanks Oliver,

For the Submission Queue pointer "Sq", I think it is being used to format the command that will be sent to the NVME controller.
NvmExpressPassThru() does not read back its content for checking after the command gets submitted.
My opinion is that it might be not necessary to add volatile attribute for it.

For the Completion Queue pointer "Cq", I am not sure which of the following is better:
a) Introduce a volatile pointer to "Cq->Pt", or
b) Mark "Cq" as volatile
Would like to get your feedback on this. Thanks. 

Best Regards,
Hao Wu

> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Oliver
> Smith-Denny
> Sent: Thursday, April 20, 2023 11:48 PM
> To: devel@edk2.groups.io; Ni, Ray <ray.ni@intel.com>
> Cc: Wu, Hao A <hao.a.wu@intel.com>; Wang, Jian J <jian.j.wang@intel.com>;
> Gao, Liming <gaoliming@byosoft.com.cn>; Michael Kubacki
> <mikuback@linux.microsoft.com>; Sean Brogan <sean.brogan@microsoft.com>
> Subject: Re: [edk2-devel] [PATCH v1 1/2] Add the volatile keyword to
> NvmExpressDxe's Passthru CQs and SQs.
> 
> Hi Ray,
> 
> This is not a pure copy from HW to SW memory, we are also polling the CQ to
> see if a transaction has completed:
> 
>    //
>    // Wait for completion queue to get filled in.
>    //
>    Status = EFI_TIMEOUT;
>    while (EFI_ERROR (gBS->CheckEvent (TimerEvent))) {
>      if (Cq->Pt != Private->Pt[QueueId]) {
>        Status = EFI_SUCCESS;
>        break;
>      }
>    }
> 
> 
> What we have seen happen is that without the volatile keyword, the compiler
> can move the Cq->Pt read outside of the loop and only do register compares
> inside the loop, i.e. we end up going the full timeout even if the CQ reports it is
> finished.
> 
> Here is the issue that was filed on the project Mu side:
> https://github.com/microsoft/mu_basecore/issues/324.
> 
> Thanks,
> Oliver
> 
> On 4/19/2023 5:48 PM, Ni, Ray wrote:
> > If it's to copy from hw to sw memory, why do we need volatile?
> >
> > Thanks,
> > Ray
> >
> >> -----Original Message-----
> >> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Oliver
> >> Smith-Denny
> >> Sent: Thursday, April 20, 2023 7:41 AM
> >> To: devel@edk2.groups.io
> >> Cc: Wu, Hao A <hao.a.wu@intel.com>; Ni, Ray <ray.ni@intel.com>; Wang,
> >> Jian J <jian.j.wang@intel.com>; Gao, Liming
> >> <gaoliming@byosoft.com.cn>; Michael Kubacki
> >> <mikuback@linux.microsoft.com>; Sean Brogan
> >> <sean.brogan@microsoft.com>
> >> Subject: [edk2-devel][PATCH v1 1/2] Add the volatile keyword to
> >> NvmExpressDxe's Passthru CQs and SQs.
> >>
> >> This updates the relevant functions that expect a non-volatile
> >>
> >> structure to be passed to them to take casts of the CQ and SQ,
> >>
> >> now that they are volatile.
> >>
> >>
> >>
> >> Cc: Hao A Wu <hao.a.wu@intel.com>
> >>
> >> Cc: Ray Ni <ray.ni@intel.com>
> >>
> >> Cc: Jian J Wang <jian.j.wang@intel.com>
> >>
> >> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> >>
> >> Cc: Michael Kubacki <mikuback@linux.microsoft.com>
> >>
> >> Cc: Sean Brogan <sean.brogan@microsoft.com>
> >>
> >> Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
> >>
> >> ---
> >>
> >>   MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressPassthru.c | 10
> >> +++++-----
> >>
> >>   1 file changed, 5 insertions(+), 5 deletions(-)
> >>
> >>
> >>
> >> diff --git a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressPassthru.c
> >> b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressPassthru.c
> >>
> >> index f37baa626a16..1a7e39500ac0 100644
> >>
> >> --- a/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressPassthru.c
> >>
> >> +++ b/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressPassthru.c
> >>
> >> @@ -459,8 +459,8 @@ NvmExpressPassThru (
> >>
> >>     EFI_STATUS                     Status;
> >>
> >>     EFI_STATUS                     PreviousStatus;
> >>
> >>     EFI_PCI_IO_PROTOCOL            *PciIo;
> >>
> >> -  NVME_SQ                        *Sq;
> >>
> >> -  NVME_CQ                        *Cq;
> >>
> >> +  volatile NVME_SQ               *Sq;
> >>
> >> +  volatile NVME_CQ               *Cq;
> >>
> >>     UINT16                         QueueId;
> >>
> >>     UINT16                         QueueSize;
> >>
> >>     UINT32                         Bytes;
> >>
> >> @@ -581,7 +581,7 @@ NvmExpressPassThru (
> >>
> >>       return EFI_INVALID_PARAMETER;
> >>
> >>     }
> >>
> >>
> >>
> >> -  ZeroMem (Sq, sizeof (NVME_SQ));
> >>
> >> +  ZeroMem ((VOID *)Sq, sizeof (NVME_SQ));
> >>
> >>     Sq->Opc  = (UINT8)Packet->NvmeCmd->Cdw0.Opcode;
> >>
> >>     Sq->Fuse = (UINT8)Packet->NvmeCmd->Cdw0.FusedOperation;
> >>
> >>     Sq->Cid  = Private->Cid[QueueId]++;
> >>
> >> @@ -815,14 +815,14 @@ NvmExpressPassThru (
> >>
> >>         // Dump every completion entry status for debugging.
> >>
> >>         //
> >>
> >>         DEBUG_CODE_BEGIN ();
> >>
> >> -      NvmeDumpStatus (Cq);
> >>
> >> +      NvmeDumpStatus ((NVME_CQ *)Cq);
> >>
> >>         DEBUG_CODE_END ();
> >>
> >>       }
> >>
> >>
> >>
> >>       //
> >>
> >>       // Copy the Respose Queue entry for this command to the callers
> >> response buffer
> >>
> >>       //
> >>
> >> -    CopyMem (Packet->NvmeCompletion, Cq, sizeof
> >> (EFI_NVM_EXPRESS_COMPLETION));
> >>
> >> +    CopyMem (Packet->NvmeCompletion, (VOID *)Cq, sizeof
> >> (EFI_NVM_EXPRESS_COMPLETION));
> >>
> >>     } else {
> >>
> >>       //
> >>
> >>       // Timeout occurs for an NVMe command. Reset the controller to
> >> abort the
> >>
> >> --
> >>
> >> 2.39.2
> >>
> >>
> >>
> >>
> >>
> >> -=-=-=-=-=-=
> >> Groups.io Links: You receive all messages sent to this group.
> >> View/Reply Online (#103263):
> >> https://edk2.groups.io/g/devel/message/103263
> >> Mute This Topic: https://groups.io/mt/98378948/1712937
> >> Group Owner: devel+owner@edk2.groups.io
> >> Unsubscribe: https://edk2.groups.io/g/devel/unsub [ray.ni@intel.com]
> >> -=-=-=-=-=-=
> >>
> >
> >
> >
> >
> >
> 
> 
> 
>