Please grant me some time to review this patch. Really sorry that I am not able to provide an estimated time for the review. Best Regards, Hao Wu From: Ashish Singhal Sent: Friday, October 13, 2023 10:13 AM To: Rick Tseng ; devel@edk2.groups.io; Wu, Hao A ; Ni, Ray ; Wang, Jian J ; Gao, Liming Cc: Jeff Brasen Subject: Re: [PATCH] MdeModulePkg/UsbBus: Get device/config descriptor after port reset Hello Hao/Ray/Jian/Gao, Any feedback on this patch? Thanks Ashish ________________________________ From: Rick Tseng > Sent: Sunday, September 24, 2023 7:54 PM To: devel@edk2.groups.io > Cc: hao.a.wu@intel.com >; ray.ni@intel.com >; jian.j.wang@intel.com >; gaoliming@byosoft.com.cn >; Ashish Singhal >; Jeff Brasen >; Rick Tseng > Subject: [PATCH] MdeModulePkg/UsbBus: Get device/config descriptor after port reset To fix the assert due to ASSERT(TrsRing !=NULL) in XhcSyncTrsRing. There is a recovery in usb mass stroage driver to do port reset after fail in transfer. And port reset operation makes that all memory resources(descriptors, endpoint memory) belonging to this device are reclaimed in underlying Xhci driver. Because USB descriptors are reclaimed in underlying Xhci driver, the next "set config" would not trigger the "Configuration Endpoint" command in Xhci driver as there is no existing configuation descriptor. It would prevent from allocating memory from xhci for endpoints. Thus there is no memmory allocated for transfering on non-default endpoint, it makes the assert happens when usb mass stroage tries to transfer after reset. This change is to refetch the device and config descriptor after port reset, it would rebuild device and configuration descriptor in Xhci driver. So the "set config" command would trigger the "Configuration Endpoint" in xhci and allocate memory for endpoints. Signed-off-by: Rick Tseng > --- MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c | 77 ++++++++++++++++++++++-- MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.h | 25 ++++++++ 2 files changed, 96 insertions(+), 6 deletions(-) diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c index c25f3cc2f2..f6e1f88b3d 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c +++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c @@ -815,12 +815,16 @@ UsbIoPortReset ( IN EFI_USB_IO_PROTOCOL *This ) { - USB_INTERFACE *UsbIf; - USB_INTERFACE *HubIf; - USB_DEVICE *Dev; - EFI_TPL OldTpl; - EFI_STATUS Status; - UINT8 DevAddress; + USB_INTERFACE *UsbIf; + USB_INTERFACE *HubIf; + USB_DEVICE *Dev; + EFI_TPL OldTpl; + EFI_STATUS Status; + UINT8 DevAddress; + USB_DEVICE_DESC DevDesc; + UINT8 NumConfig; + VOID *Buf; + UINT8 Index; OldTpl = gBS->RaiseTPL (USB_BUS_TPL); @@ -882,6 +886,67 @@ UsbIoPortReset ( // is in CONFIGURED state. // if (Dev->ActiveConfig != NULL) { + // + // We just do a port reset, so we need to do as a new device enumeration. + // Need to get the device descriptor, configuration descriptor before set config + // + Status = UsbCtrlGetDesc (Dev, USB_DESC_TYPE_DEVICE, 0, 0, &DevDesc, sizeof (DevDesc)); + if (EFI_ERROR (Status)) { + DEBUG (( + DEBUG_ERROR, + "UsbIoPortReset: failed to get device desc for device %d - %r\n", + Dev->Address, + Status + )); + goto ON_EXIT; + } + + NumConfig = Dev->DevDesc->Desc.NumConfigurations; + if (NumConfig == 0) { + DEBUG (( + DEBUG_ERROR, + "UsbIoPortReset: no configuration descriptor for device %d - %r\n", + Dev->Address, + Status + )); + goto ON_EXIT; + } + + for (Index = 0; Index < NumConfig; Index++) { + if (Dev->DevDesc->Configs[Index] == NULL) { + DEBUG (( + DEBUG_ERROR, + "UsbIoPortReset: no configuration descriptor for index %d - %r\n", + Index, + Status + )); + goto ON_EXIT; + } + + Buf = AllocateZeroPool (Dev->DevDesc->Configs[Index]->Desc.TotalLength); + if (Buf == NULL) { + DEBUG (( + DEBUG_ERROR, + "UsbIoPortReset: allocation memory fail for configuration desc - %r\n", + Status + )); + goto ON_EXIT; + } + + Status = UsbCtrlGetDesc (Dev, USB_DESC_TYPE_CONFIG, Index, 0, Buf, Dev->DevDesc->Configs[Index]->Desc.TotalLength); + FreePool (Buf); + + if (EFI_ERROR (Status)) { + DEBUG (( + DEBUG_ERROR, + "UsbIoPortReset: failed to get config desc for device %d - %r\n", + Dev->Address, + Status + )); + goto ON_EXIT; + } + } + Status = UsbSetConfig (Dev, Dev->ActiveConfig->Desc.ConfigurationValue); if (EFI_ERROR (Status)) { diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.h b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.h index ce205e706d..5ae5c4056b 100644 --- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.h +++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbDesc.h @@ -224,4 +224,29 @@ UsbIoClearFeature ( IN UINT16 Index ); +/** + Get the standard descriptors. + + @param UsbDev The USB device to read descriptor from. + @param DescType The type of descriptor to read. + @param DescIndex The index of descriptor to read. + @param LangId Language ID, only used to get string, otherwise set + it to 0. + @param Buf The buffer to hold the descriptor read. + @param Length The length of the buffer. + + @retval EFI_SUCCESS The descriptor is read OK. + @retval Others Failed to retrieve the descriptor. + +**/ +EFI_STATUS +UsbCtrlGetDesc ( + IN USB_DEVICE *UsbDev, + IN UINTN DescType, + IN UINTN DescIndex, + IN UINT16 LangId, + OUT VOID *Buf, + IN UINTN Length + ); + #endif -- 2.17.1 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#109619): https://edk2.groups.io/g/devel/message/109619 Mute This Topic: https://groups.io/mt/101576341/7686176 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io] -=-=-=-=-=-=-=-=-=-=-=-