* [PATCH] MdeModulePkg/Usb/Keyboard.c: Don't request protocol before setting @ 2022-02-24 11:38 Sean Rhodes 2022-03-02 2:10 ` Wu, Hao A 0 siblings, 1 reply; 3+ messages in thread From: Sean Rhodes @ 2022-02-24 11:38 UTC (permalink / raw) To: devel Cc: guo.dong, Sean Rhodes, Hao A Wu, Ray Ni, Matt DeVillier, Patrick Rudolph No need to check the interface protocol then conditionally setting, just set it to BOOT_PROTOCOL and check for error. This is what Linux does for HID devices as some don't follow the USB spec. One example is the Aspeed BMC HID keyboard device, which adds a massive boot delay without this patch as it doesn't respond to 'GetProtocolRequest'. Cc: Hao A Wu <hao.a.wu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Sean Rhodes <sean@starlabs.systems> --- MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c b/MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c index 5a94a4dda7..b5a6459a35 100644 --- a/MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c +++ b/MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c @@ -805,7 +805,6 @@ InitUSBKeyboard ( ) { UINT16 ConfigValue; - UINT8 Protocol; EFI_STATUS Status; UINT32 TransferResult; @@ -854,22 +853,15 @@ InitUSBKeyboard ( } } - UsbGetProtocolRequest ( - UsbKeyboardDevice->UsbIo, - UsbKeyboardDevice->InterfaceDescriptor.InterfaceNumber, - &Protocol - ); // // Set boot protocol for the USB Keyboard. // This driver only supports boot protocol. // - if (Protocol != BOOT_PROTOCOL) { - UsbSetProtocolRequest ( - UsbKeyboardDevice->UsbIo, - UsbKeyboardDevice->InterfaceDescriptor.InterfaceNumber, - BOOT_PROTOCOL - ); - } + UsbSetProtocolRequest ( + UsbKeyboardDevice->UsbIo, + UsbKeyboardDevice->InterfaceDescriptor.InterfaceNumber, + BOOT_PROTOCOL + ); UsbKeyboardDevice->CtrlOn = FALSE; UsbKeyboardDevice->AltOn = FALSE; -- 2.32.0 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] MdeModulePkg/Usb/Keyboard.c: Don't request protocol before setting 2022-02-24 11:38 [PATCH] MdeModulePkg/Usb/Keyboard.c: Don't request protocol before setting Sean Rhodes @ 2022-03-02 2:10 ` Wu, Hao A 2022-03-03 6:27 ` [edk2-devel] " Wu, Hao A 0 siblings, 1 reply; 3+ messages in thread From: Wu, Hao A @ 2022-03-02 2:10 UTC (permalink / raw) To: Rhodes, Sean, devel@edk2.groups.io Cc: Dong, Guo, Rhodes, Sean, Ni, Ray, Matt DeVillier, Patrick Rudolph Reviewed-by: Hao A Wu <hao.a.wu@intel.com> Best Regards, Hao Wu > -----Original Message----- > From: Sean Rhodes <sean@starlabs.systems> > Sent: Thursday, February 24, 2022 7:38 PM > To: devel@edk2.groups.io > Cc: Dong, Guo <guo.dong@intel.com>; Rhodes, Sean > <sean@starlabs.systems>; Wu, Hao A <hao.a.wu@intel.com>; Ni, Ray > <ray.ni@intel.com>; Matt DeVillier <matt.devillier@gmail.com>; Patrick > Rudolph <patrick.rudolph@9elements.com> > Subject: [PATCH] MdeModulePkg/Usb/Keyboard.c: Don't request protocol > before setting > > No need to check the interface protocol then conditionally setting, > just set it to BOOT_PROTOCOL and check for error. > > This is what Linux does for HID devices as some don't follow the USB spec. > One example is the Aspeed BMC HID keyboard device, which adds a massive > boot delay without this patch as it doesn't respond to 'GetProtocolRequest'. > > Cc: Hao A Wu <hao.a.wu@intel.com> > Cc: Ray Ni <ray.ni@intel.com> > Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> > Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> > Signed-off-by: Sean Rhodes <sean@starlabs.systems> > --- > MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c | 18 +++++------------- > 1 file changed, 5 insertions(+), 13 deletions(-) > > diff --git a/MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c > b/MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c > index 5a94a4dda7..b5a6459a35 100644 > --- a/MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c > +++ b/MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c > @@ -805,7 +805,6 @@ InitUSBKeyboard ( > ) > > { > > UINT16 ConfigValue; > > - UINT8 Protocol; > > EFI_STATUS Status; > > UINT32 TransferResult; > > > > @@ -854,22 +853,15 @@ InitUSBKeyboard ( > } > > } > > > > - UsbGetProtocolRequest ( > > - UsbKeyboardDevice->UsbIo, > > - UsbKeyboardDevice->InterfaceDescriptor.InterfaceNumber, > > - &Protocol > > - ); > > // > > // Set boot protocol for the USB Keyboard. > > // This driver only supports boot protocol. > > // > > - if (Protocol != BOOT_PROTOCOL) { > > - UsbSetProtocolRequest ( > > - UsbKeyboardDevice->UsbIo, > > - UsbKeyboardDevice->InterfaceDescriptor.InterfaceNumber, > > - BOOT_PROTOCOL > > - ); > > - } > > + UsbSetProtocolRequest ( > > + UsbKeyboardDevice->UsbIo, > > + UsbKeyboardDevice->InterfaceDescriptor.InterfaceNumber, > > + BOOT_PROTOCOL > > + ); > > > > UsbKeyboardDevice->CtrlOn = FALSE; > > UsbKeyboardDevice->AltOn = FALSE; > > -- > 2.32.0 ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [edk2-devel] [PATCH] MdeModulePkg/Usb/Keyboard.c: Don't request protocol before setting 2022-03-02 2:10 ` Wu, Hao A @ 2022-03-03 6:27 ` Wu, Hao A 0 siblings, 0 replies; 3+ messages in thread From: Wu, Hao A @ 2022-03-03 6:27 UTC (permalink / raw) To: devel@edk2.groups.io, Wu, Hao A, Rhodes, Sean Cc: Dong, Guo, Ni, Ray, Matt DeVillier, Patrick Rudolph Pushed via: PR - https://github.com/tianocore/edk2/pull/2574 Commit - https://github.com/tianocore/edk2/commit/589d51df260465e2561979b8a988e77b0f32a6e8 Best Regards, Hao Wu > -----Original Message----- > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Wu, Hao > A > Sent: Wednesday, March 2, 2022 10:10 AM > To: Rhodes, Sean <sean@starlabs.systems>; devel@edk2.groups.io > Cc: Dong, Guo <guo.dong@intel.com>; Rhodes, Sean > <sean@starlabs.systems>; Ni, Ray <ray.ni@intel.com>; Matt DeVillier > <matt.devillier@gmail.com>; Patrick Rudolph > <patrick.rudolph@9elements.com> > Subject: Re: [edk2-devel] [PATCH] MdeModulePkg/Usb/Keyboard.c: Don't > request protocol before setting > > Reviewed-by: Hao A Wu <hao.a.wu@intel.com> > > Best Regards, > Hao Wu > > > -----Original Message----- > > From: Sean Rhodes <sean@starlabs.systems> > > Sent: Thursday, February 24, 2022 7:38 PM > > To: devel@edk2.groups.io > > Cc: Dong, Guo <guo.dong@intel.com>; Rhodes, Sean > > <sean@starlabs.systems>; Wu, Hao A <hao.a.wu@intel.com>; Ni, Ray > > <ray.ni@intel.com>; Matt DeVillier <matt.devillier@gmail.com>; Patrick > > Rudolph <patrick.rudolph@9elements.com> > > Subject: [PATCH] MdeModulePkg/Usb/Keyboard.c: Don't request protocol > > before setting > > > > No need to check the interface protocol then conditionally setting, > > just set it to BOOT_PROTOCOL and check for error. > > > > This is what Linux does for HID devices as some don't follow the USB spec. > > One example is the Aspeed BMC HID keyboard device, which adds a > > massive boot delay without this patch as it doesn't respond to > 'GetProtocolRequest'. > > > > Cc: Hao A Wu <hao.a.wu@intel.com> > > Cc: Ray Ni <ray.ni@intel.com> > > Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> > > Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> > > Signed-off-by: Sean Rhodes <sean@starlabs.systems> > > --- > > MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c | 18 +++++------------- > > 1 file changed, 5 insertions(+), 13 deletions(-) > > > > diff --git a/MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c > > b/MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c > > index 5a94a4dda7..b5a6459a35 100644 > > --- a/MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c > > +++ b/MdeModulePkg/Bus/Usb/UsbKbDxe/KeyBoard.c > > @@ -805,7 +805,6 @@ InitUSBKeyboard ( > > ) > > > > { > > > > UINT16 ConfigValue; > > > > - UINT8 Protocol; > > > > EFI_STATUS Status; > > > > UINT32 TransferResult; > > > > > > > > @@ -854,22 +853,15 @@ InitUSBKeyboard ( > > } > > > > } > > > > > > > > - UsbGetProtocolRequest ( > > > > - UsbKeyboardDevice->UsbIo, > > > > - UsbKeyboardDevice->InterfaceDescriptor.InterfaceNumber, > > > > - &Protocol > > > > - ); > > > > // > > > > // Set boot protocol for the USB Keyboard. > > > > // This driver only supports boot protocol. > > > > // > > > > - if (Protocol != BOOT_PROTOCOL) { > > > > - UsbSetProtocolRequest ( > > > > - UsbKeyboardDevice->UsbIo, > > > > - UsbKeyboardDevice->InterfaceDescriptor.InterfaceNumber, > > > > - BOOT_PROTOCOL > > > > - ); > > > > - } > > > > + UsbSetProtocolRequest ( > > > > + UsbKeyboardDevice->UsbIo, > > > > + UsbKeyboardDevice->InterfaceDescriptor.InterfaceNumber, > > > > + BOOT_PROTOCOL > > > > + ); > > > > > > > > UsbKeyboardDevice->CtrlOn = FALSE; > > > > UsbKeyboardDevice->AltOn = FALSE; > > > > -- > > 2.32.0 > > > > > ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-03-03 6:27 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-02-24 11:38 [PATCH] MdeModulePkg/Usb/Keyboard.c: Don't request protocol before setting Sean Rhodes 2022-03-02 2:10 ` Wu, Hao A 2022-03-03 6:27 ` [edk2-devel] " Wu, Hao A
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox