* [PATCH v2 0/1] MdeModulePkg: Put USB DEBUGs that occur for bulk timeouts under VERBOSE
@ 2022-12-06 14:30 Rebecca Cran
2022-12-06 14:30 ` [PATCH v2 1/1] " Rebecca Cran
0 siblings, 1 reply; 4+ messages in thread
From: Rebecca Cran @ 2022-12-06 14:30 UTC (permalink / raw)
To: devel, Liming Gao, Ray Ni, J Wang, Hao Wu; +Cc: Rebecca Cran
*Changes between v1 and v2*
Only switch to DEBUG_VERBOSE for EFI_TIMEOUT errors.
Test Pull Request: https://github.com/tianocore/edk2/pull/3705
---
MdeModulePkg: Put USB DEBUGs that occur for bulk timeouts under VERBOSE
With the pending commit of UsbNetworkPkg, it will become common for
UsbBulkTransfer calls to timeout, given that the drivers are called from
MnpSystemPoll every MNP_SYS_POLL_INTERVAL milliseconds: the drivers
check for network packets by calling UsbBulkTransfer with a timeout of
1ms.
Avoid console spam by moving DEBUG messages that occur each time a bulk
transfer request times out from DEBUG_ERROR to DEBUG_VERBOSE, for both
EHCI and XHCI drivers.
Rebecca Cran (1):
MdeModulePkg: Put USB DEBUGs that occur for bulk timeouts under
VERBOSE
MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c | 9 ++++++++-
MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c | 2 +-
MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c | 9 ++++++++-
MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c | 6 +++---
4 files changed, 20 insertions(+), 6 deletions(-)
--
2.30.2
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH v2 1/1] MdeModulePkg: Put USB DEBUGs that occur for bulk timeouts under VERBOSE 2022-12-06 14:30 [PATCH v2 0/1] MdeModulePkg: Put USB DEBUGs that occur for bulk timeouts under VERBOSE Rebecca Cran @ 2022-12-06 14:30 ` Rebecca Cran 2022-12-07 1:07 ` Wu, Hao A 0 siblings, 1 reply; 4+ messages in thread From: Rebecca Cran @ 2022-12-06 14:30 UTC (permalink / raw) To: devel, Liming Gao, Ray Ni, J Wang, Hao Wu; +Cc: Rebecca Cran With the pending commit of UsbNetworkPkg, it will become common for UsbBulkTransfer calls to timeout, given that the drivers are called from MnpSystemPoll every MNP_SYS_POLL_INTERVAL milliseconds: the drivers check for network packets by calling UsbBulkTransfer with a timeout of 1ms. Avoid console spam by moving DEBUG messages that occur each time a bulk transfer request times out from DEBUG_ERROR to DEBUG_VERBOSE, for both EHCI and XHCI drivers. Signed-off-by: Rebecca Cran <rebecca@quicinc.com> --- MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c | 9 ++++++++- MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c | 2 +- MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c | 9 ++++++++- MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c | 6 +++--- 4 files changed, 20 insertions(+), 6 deletions(-) diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c b/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c index 0b7270f4e930..e903593b0198 100644 --- a/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c +++ b/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c @@ -848,6 +848,7 @@ EhcBulkTransfer ( URB *Urb; EFI_TPL OldTpl; EFI_STATUS Status; + UINTN DebugErrorLevel; // // Validate the parameters @@ -932,7 +933,13 @@ EhcBulkTransfer ( gBS->RestoreTPL (OldTpl); if (EFI_ERROR (Status)) { - DEBUG ((DEBUG_ERROR, "EhcBulkTransfer: error - %r, transfer - %x\n", Status, *TransferResult)); + if (Status == EFI_TIMEOUT) { + DebugErrorLevel = DEBUG_VERBOSE; + } else { + DebugErrorLevel = DEBUG_ERROR; + } + + DEBUG ((DebugErrorLevel, "EhcBulkTransfer: error - %r, transfer - %x\n", Status, *TransferResult)); } return Status; diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c b/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c index 5da26afbe120..6967aabceb78 100644 --- a/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c +++ b/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c @@ -702,7 +702,7 @@ EhcExecTransfer ( } if (!Finished) { - DEBUG ((DEBUG_ERROR, "EhcExecTransfer: transfer not finished in %dms\n", (UINT32)TimeOut)); + DEBUG ((DEBUG_VERBOSE, "EhcExecTransfer: transfer not finished in %dms\n", (UINT32)TimeOut)); EhcDumpQh (Urb->Qh, NULL, FALSE); Status = EFI_TIMEOUT; diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c index c05431ff30ec..15fb49f28fa0 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c +++ b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c @@ -1242,6 +1242,7 @@ XhcBulkTransfer ( UINT8 SlotId; EFI_STATUS Status; EFI_TPL OldTpl; + UINTN DebugErrorLevel; // // Validate the parameters @@ -1304,7 +1305,13 @@ XhcBulkTransfer ( ON_EXIT: if (EFI_ERROR (Status)) { - DEBUG ((DEBUG_ERROR, "XhcBulkTransfer: error - %r, transfer - %x\n", Status, *TransferResult)); + if (Status == EFI_TIMEOUT) { + DebugErrorLevel = DEBUG_VERBOSE; + } else { + DebugErrorLevel = DEBUG_ERROR; + } + + DEBUG ((DebugErrorLevel, "XhcBulkTransfer: error - %r, transfer - %x\n", Status, *TransferResult)); } gBS->RestoreTPL (OldTpl); diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c index 13b0400e83d7..13247f7b0dfc 100644 --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c @@ -734,7 +734,7 @@ XhcDequeueTrbFromEndpoint ( Dci = XhcEndpointToDci (Urb->Ep.EpAddr, (UINT8)(Urb->Ep.Direction)); ASSERT (Dci < 32); - DEBUG ((DEBUG_INFO, "Stop Slot = %x,Dci = %x\n", SlotId, Dci)); + DEBUG ((DEBUG_VERBOSE, "Stop Slot = %x,Dci = %x\n", SlotId, Dci)); // // 1) Send Stop endpoint command to stop xHC from executing of the TDs on the endpoint @@ -3376,7 +3376,7 @@ XhcStopEndpoint ( EVT_TRB_COMMAND_COMPLETION *EvtTrb; CMD_TRB_STOP_ENDPOINT CmdTrbStopED; - DEBUG ((DEBUG_INFO, "XhcStopEndpoint: Slot = 0x%x, Dci = 0x%x\n", SlotId, Dci)); + DEBUG ((DEBUG_VERBOSE, "XhcStopEndpoint: Slot = 0x%x, Dci = 0x%x\n", SlotId, Dci)); // // When XhcCheckUrbResult waits for the Stop_Endpoint completion, it also checks @@ -3497,7 +3497,7 @@ XhcSetTrDequeuePointer ( CMD_SET_TR_DEQ_POINTER CmdSetTRDeq; EFI_PHYSICAL_ADDRESS PhyAddr; - DEBUG ((DEBUG_INFO, "XhcSetTrDequeuePointer: Slot = 0x%x, Dci = 0x%x, Urb = 0x%x\n", SlotId, Dci, Urb)); + DEBUG ((DEBUG_VERBOSE, "XhcSetTrDequeuePointer: Slot = 0x%x, Dci = 0x%x, Urb = 0x%x\n", SlotId, Dci, Urb)); // // Send stop endpoint command to transit Endpoint from running to stop state -- 2.30.2 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2 1/1] MdeModulePkg: Put USB DEBUGs that occur for bulk timeouts under VERBOSE 2022-12-06 14:30 ` [PATCH v2 1/1] " Rebecca Cran @ 2022-12-07 1:07 ` Wu, Hao A 2022-12-08 3:01 ` [edk2-devel] " Wu, Hao A 0 siblings, 1 reply; 4+ messages in thread From: Wu, Hao A @ 2022-12-07 1:07 UTC (permalink / raw) To: Rebecca Cran, devel@edk2.groups.io, Gao, Liming, Ni, Ray, Wang, Jian J Reviewed-by: Hao A Wu <hao.a.wu@intel.com> Will wait a couple of days before merging to see if comments from other reviewers. Best Regards, Hao Wu > -----Original Message----- > From: Rebecca Cran <rebecca@quicinc.com> > Sent: Tuesday, December 6, 2022 10:31 PM > To: devel@edk2.groups.io; Gao, Liming <gaoliming@byosoft.com.cn>; Ni, > Ray <ray.ni@intel.com>; Wang, Jian J <jian.j.wang@intel.com>; Wu, Hao A > <hao.a.wu@intel.com> > Cc: Rebecca Cran <rebecca@quicinc.com> > Subject: [PATCH v2 1/1] MdeModulePkg: Put USB DEBUGs that occur for bulk > timeouts under VERBOSE > > With the pending commit of UsbNetworkPkg, it will become common for > UsbBulkTransfer calls to timeout, given that the drivers are called from > MnpSystemPoll every MNP_SYS_POLL_INTERVAL milliseconds: the drivers > check for network packets by calling UsbBulkTransfer with a timeout of > 1ms. > > Avoid console spam by moving DEBUG messages that occur each time a bulk > transfer request times out from DEBUG_ERROR to DEBUG_VERBOSE, for > both > EHCI and XHCI drivers. > > Signed-off-by: Rebecca Cran <rebecca@quicinc.com> > --- > MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c | 9 ++++++++- > MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c | 2 +- > MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c | 9 ++++++++- > MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c | 6 +++--- > 4 files changed, 20 insertions(+), 6 deletions(-) > > diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c > b/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c > index 0b7270f4e930..e903593b0198 100644 > --- a/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c > +++ b/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c > @@ -848,6 +848,7 @@ EhcBulkTransfer ( > URB *Urb; > EFI_TPL OldTpl; > EFI_STATUS Status; > + UINTN DebugErrorLevel; > > // > // Validate the parameters > @@ -932,7 +933,13 @@ EhcBulkTransfer ( > gBS->RestoreTPL (OldTpl); > > if (EFI_ERROR (Status)) { > - DEBUG ((DEBUG_ERROR, "EhcBulkTransfer: error - %r, transfer - %x\n", > Status, *TransferResult)); > + if (Status == EFI_TIMEOUT) { > + DebugErrorLevel = DEBUG_VERBOSE; > + } else { > + DebugErrorLevel = DEBUG_ERROR; > + } > + > + DEBUG ((DebugErrorLevel, "EhcBulkTransfer: error - %r, transfer - %x\n", > Status, *TransferResult)); > } > > return Status; > diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c > b/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c > index 5da26afbe120..6967aabceb78 100644 > --- a/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c > +++ b/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c > @@ -702,7 +702,7 @@ EhcExecTransfer ( > } > > if (!Finished) { > - DEBUG ((DEBUG_ERROR, "EhcExecTransfer: transfer not finished > in %dms\n", (UINT32)TimeOut)); > + DEBUG ((DEBUG_VERBOSE, "EhcExecTransfer: transfer not finished > in %dms\n", (UINT32)TimeOut)); > EhcDumpQh (Urb->Qh, NULL, FALSE); > > Status = EFI_TIMEOUT; > diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c > b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c > index c05431ff30ec..15fb49f28fa0 100644 > --- a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c > +++ b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c > @@ -1242,6 +1242,7 @@ XhcBulkTransfer ( > UINT8 SlotId; > EFI_STATUS Status; > EFI_TPL OldTpl; > + UINTN DebugErrorLevel; > > // > // Validate the parameters > @@ -1304,7 +1305,13 @@ XhcBulkTransfer ( > > ON_EXIT: > if (EFI_ERROR (Status)) { > - DEBUG ((DEBUG_ERROR, "XhcBulkTransfer: error - %r, transfer - %x\n", > Status, *TransferResult)); > + if (Status == EFI_TIMEOUT) { > + DebugErrorLevel = DEBUG_VERBOSE; > + } else { > + DebugErrorLevel = DEBUG_ERROR; > + } > + > + DEBUG ((DebugErrorLevel, "XhcBulkTransfer: error - %r, transfer - %x\n", > Status, *TransferResult)); > } > > gBS->RestoreTPL (OldTpl); > diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c > b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c > index 13b0400e83d7..13247f7b0dfc 100644 > --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c > +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c > @@ -734,7 +734,7 @@ XhcDequeueTrbFromEndpoint ( > Dci = XhcEndpointToDci (Urb->Ep.EpAddr, (UINT8)(Urb->Ep.Direction)); > ASSERT (Dci < 32); > > - DEBUG ((DEBUG_INFO, "Stop Slot = %x,Dci = %x\n", SlotId, Dci)); > + DEBUG ((DEBUG_VERBOSE, "Stop Slot = %x,Dci = %x\n", SlotId, Dci)); > > // > // 1) Send Stop endpoint command to stop xHC from executing of the TDs > on the endpoint > @@ -3376,7 +3376,7 @@ XhcStopEndpoint ( > EVT_TRB_COMMAND_COMPLETION *EvtTrb; > CMD_TRB_STOP_ENDPOINT CmdTrbStopED; > > - DEBUG ((DEBUG_INFO, "XhcStopEndpoint: Slot = 0x%x, Dci = 0x%x\n", > SlotId, Dci)); > + DEBUG ((DEBUG_VERBOSE, "XhcStopEndpoint: Slot = 0x%x, Dci = 0x%x\n", > SlotId, Dci)); > > // > // When XhcCheckUrbResult waits for the Stop_Endpoint completion, it > also checks > @@ -3497,7 +3497,7 @@ XhcSetTrDequeuePointer ( > CMD_SET_TR_DEQ_POINTER CmdSetTRDeq; > EFI_PHYSICAL_ADDRESS PhyAddr; > > - DEBUG ((DEBUG_INFO, "XhcSetTrDequeuePointer: Slot = 0x%x, Dci = 0x%x, > Urb = 0x%x\n", SlotId, Dci, Urb)); > + DEBUG ((DEBUG_VERBOSE, "XhcSetTrDequeuePointer: Slot = 0x%x, Dci = > 0x%x, Urb = 0x%x\n", SlotId, Dci, Urb)); > > // > // Send stop endpoint command to transit Endpoint from running to stop > state > -- > 2.30.2 ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [edk2-devel] [PATCH v2 1/1] MdeModulePkg: Put USB DEBUGs that occur for bulk timeouts under VERBOSE 2022-12-07 1:07 ` Wu, Hao A @ 2022-12-08 3:01 ` Wu, Hao A 0 siblings, 0 replies; 4+ messages in thread From: Wu, Hao A @ 2022-12-08 3:01 UTC (permalink / raw) To: devel@edk2.groups.io, Rebecca Cran, Gao, Liming, Ni, Ray, Wang, Jian J Pushed via: PR - https://github.com/tianocore/edk2/pull/3733 Commit - https://github.com/tianocore/edk2/commit/d9e7f6fe49738421c02381425d289767d7055ef1 Best Regards, Hao Wu > -----Original Message----- > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Wu, Hao > A > Sent: Wednesday, December 7, 2022 9:08 AM > To: Rebecca Cran <rebecca@quicinc.com>; devel@edk2.groups.io; Gao, > Liming <gaoliming@byosoft.com.cn>; Ni, Ray <ray.ni@intel.com>; Wang, > Jian J <jian.j.wang@intel.com> > Subject: Re: [edk2-devel] [PATCH v2 1/1] MdeModulePkg: Put USB DEBUGs > that occur for bulk timeouts under VERBOSE > > Reviewed-by: Hao A Wu <hao.a.wu@intel.com> > Will wait a couple of days before merging to see if comments from other > reviewers. > > Best Regards, > Hao Wu > > > -----Original Message----- > > From: Rebecca Cran <rebecca@quicinc.com> > > Sent: Tuesday, December 6, 2022 10:31 PM > > To: devel@edk2.groups.io; Gao, Liming <gaoliming@byosoft.com.cn>; Ni, > > Ray <ray.ni@intel.com>; Wang, Jian J <jian.j.wang@intel.com>; Wu, Hao A > > <hao.a.wu@intel.com> > > Cc: Rebecca Cran <rebecca@quicinc.com> > > Subject: [PATCH v2 1/1] MdeModulePkg: Put USB DEBUGs that occur for > bulk > > timeouts under VERBOSE > > > > With the pending commit of UsbNetworkPkg, it will become common for > > UsbBulkTransfer calls to timeout, given that the drivers are called from > > MnpSystemPoll every MNP_SYS_POLL_INTERVAL milliseconds: the drivers > > check for network packets by calling UsbBulkTransfer with a timeout of > > 1ms. > > > > Avoid console spam by moving DEBUG messages that occur each time a > bulk > > transfer request times out from DEBUG_ERROR to DEBUG_VERBOSE, for > > both > > EHCI and XHCI drivers. > > > > Signed-off-by: Rebecca Cran <rebecca@quicinc.com> > > --- > > MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c | 9 ++++++++- > > MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c | 2 +- > > MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c | 9 ++++++++- > > MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c | 6 +++--- > > 4 files changed, 20 insertions(+), 6 deletions(-) > > > > diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c > > b/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c > > index 0b7270f4e930..e903593b0198 100644 > > --- a/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c > > +++ b/MdeModulePkg/Bus/Pci/EhciDxe/Ehci.c > > @@ -848,6 +848,7 @@ EhcBulkTransfer ( > > URB *Urb; > > EFI_TPL OldTpl; > > EFI_STATUS Status; > > + UINTN DebugErrorLevel; > > > > // > > // Validate the parameters > > @@ -932,7 +933,13 @@ EhcBulkTransfer ( > > gBS->RestoreTPL (OldTpl); > > > > if (EFI_ERROR (Status)) { > > - DEBUG ((DEBUG_ERROR, "EhcBulkTransfer: error - %r, transfer - %x\n", > > Status, *TransferResult)); > > + if (Status == EFI_TIMEOUT) { > > + DebugErrorLevel = DEBUG_VERBOSE; > > + } else { > > + DebugErrorLevel = DEBUG_ERROR; > > + } > > + > > + DEBUG ((DebugErrorLevel, "EhcBulkTransfer: error - %r, transfer - > %x\n", > > Status, *TransferResult)); > > } > > > > return Status; > > diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c > > b/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c > > index 5da26afbe120..6967aabceb78 100644 > > --- a/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c > > +++ b/MdeModulePkg/Bus/Pci/EhciDxe/EhciSched.c > > @@ -702,7 +702,7 @@ EhcExecTransfer ( > > } > > > > if (!Finished) { > > - DEBUG ((DEBUG_ERROR, "EhcExecTransfer: transfer not finished > > in %dms\n", (UINT32)TimeOut)); > > + DEBUG ((DEBUG_VERBOSE, "EhcExecTransfer: transfer not finished > > in %dms\n", (UINT32)TimeOut)); > > EhcDumpQh (Urb->Qh, NULL, FALSE); > > > > Status = EFI_TIMEOUT; > > diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c > > b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c > > index c05431ff30ec..15fb49f28fa0 100644 > > --- a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c > > +++ b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c > > @@ -1242,6 +1242,7 @@ XhcBulkTransfer ( > > UINT8 SlotId; > > EFI_STATUS Status; > > EFI_TPL OldTpl; > > + UINTN DebugErrorLevel; > > > > // > > // Validate the parameters > > @@ -1304,7 +1305,13 @@ XhcBulkTransfer ( > > > > ON_EXIT: > > if (EFI_ERROR (Status)) { > > - DEBUG ((DEBUG_ERROR, "XhcBulkTransfer: error - %r, transfer - %x\n", > > Status, *TransferResult)); > > + if (Status == EFI_TIMEOUT) { > > + DebugErrorLevel = DEBUG_VERBOSE; > > + } else { > > + DebugErrorLevel = DEBUG_ERROR; > > + } > > + > > + DEBUG ((DebugErrorLevel, "XhcBulkTransfer: error - %r, transfer - > %x\n", > > Status, *TransferResult)); > > } > > > > gBS->RestoreTPL (OldTpl); > > diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c > > b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c > > index 13b0400e83d7..13247f7b0dfc 100644 > > --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c > > +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c > > @@ -734,7 +734,7 @@ XhcDequeueTrbFromEndpoint ( > > Dci = XhcEndpointToDci (Urb->Ep.EpAddr, (UINT8)(Urb->Ep.Direction)); > > ASSERT (Dci < 32); > > > > - DEBUG ((DEBUG_INFO, "Stop Slot = %x,Dci = %x\n", SlotId, Dci)); > > + DEBUG ((DEBUG_VERBOSE, "Stop Slot = %x,Dci = %x\n", SlotId, Dci)); > > > > // > > // 1) Send Stop endpoint command to stop xHC from executing of the TDs > > on the endpoint > > @@ -3376,7 +3376,7 @@ XhcStopEndpoint ( > > EVT_TRB_COMMAND_COMPLETION *EvtTrb; > > CMD_TRB_STOP_ENDPOINT CmdTrbStopED; > > > > - DEBUG ((DEBUG_INFO, "XhcStopEndpoint: Slot = 0x%x, Dci = 0x%x\n", > > SlotId, Dci)); > > + DEBUG ((DEBUG_VERBOSE, "XhcStopEndpoint: Slot = 0x%x, Dci = > 0x%x\n", > > SlotId, Dci)); > > > > // > > // When XhcCheckUrbResult waits for the Stop_Endpoint completion, it > > also checks > > @@ -3497,7 +3497,7 @@ XhcSetTrDequeuePointer ( > > CMD_SET_TR_DEQ_POINTER CmdSetTRDeq; > > EFI_PHYSICAL_ADDRESS PhyAddr; > > > > - DEBUG ((DEBUG_INFO, "XhcSetTrDequeuePointer: Slot = 0x%x, Dci = > 0x%x, > > Urb = 0x%x\n", SlotId, Dci, Urb)); > > + DEBUG ((DEBUG_VERBOSE, "XhcSetTrDequeuePointer: Slot = 0x%x, Dci = > > 0x%x, Urb = 0x%x\n", SlotId, Dci, Urb)); > > > > // > > // Send stop endpoint command to transit Endpoint from running to stop > > state > > -- > > 2.30.2 > > > > > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-12-08 3:01 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-12-06 14:30 [PATCH v2 0/1] MdeModulePkg: Put USB DEBUGs that occur for bulk timeouts under VERBOSE Rebecca Cran 2022-12-06 14:30 ` [PATCH v2 1/1] " Rebecca Cran 2022-12-07 1:07 ` Wu, Hao A 2022-12-08 3:01 ` [edk2-devel] " Wu, Hao A
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox