From: "Wu, Hao A" <hao.a.wu@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"Wu, Hao A" <hao.a.wu@intel.com>,
"Rosli, Muhammad Aiman" <muhammad.aiman.rosli@intel.com>,
"Wang, Jian J" <jian.j.wang@intel.com>,
"Gao, Liming" <gaoliming@byosoft.com.cn>,
"Ni, Ray" <ray.ni@intel.com>
Subject: Re: [edk2-devel] [PATCH v3] MdeModulePkg: Enabling OS boot from SD card through UEFI payload
Date: Mon, 24 Jan 2022 02:02:00 +0000 [thread overview]
Message-ID: <DM6PR11MB4025C50358F2A58EE3477F2FCA5E9@DM6PR11MB4025.namprd11.prod.outlook.com> (raw)
In-Reply-To: <DM6PR11MB4025FB319675361E08509C68CA5B9@DM6PR11MB4025.namprd11.prod.outlook.com>
Change the subject of the commit to "MdeModulePkg/SdMmcPciHcDxe: Robust improvements for SD card 1.8V switch" in order to better reflect the purpose of the change.
Patch merged via:
PR - https://github.com/tianocore/edk2/pull/2438
Commit - https://github.com/tianocore/edk2/commit/7e5c603cba0823fd97456984f4cfc21c4c831b52
Best Regards,
Hao Wu
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Wu, Hao
> A
> Sent: Friday, January 21, 2022 8:57 AM
> To: devel@edk2.groups.io; Rosli, Muhammad Aiman
> <muhammad.aiman.rosli@intel.com>; Wang, Jian J <jian.j.wang@intel.com>;
> Gao, Liming <gaoliming@byosoft.com.cn>; Ni, Ray <ray.ni@intel.com>
> Subject: Re: [edk2-devel] [PATCH v3] MdeModulePkg: Enabling OS boot
> from SD card through UEFI payload
>
> (Add missing maintainers/reviewers)
>
> Reviewed-by: Hao A Wu <hao.a.wu@intel.com> Will wait until early next
> week for the merging to see if any comment from other reviewers.
>
> Best Regards,
> Hao Wu
>
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Aiman
> > Rosli
> > Sent: Friday, January 21, 2022 2:53 AM
> > To: devel@edk2.groups.io
> > Cc: Rosli, Muhammad Aiman <muhammad.aiman.rosli@intel.com>
> > Subject: [edk2-devel] [PATCH v3] MdeModulePkg: Enabling OS boot from
> > SD card through UEFI payload
> >
> > This changes is by adding 50ms delay during voltage switching from
> > 3.3V to 1.8V, plus adding a goto Voltage33Retry for 3.3V checking and
> retrying.
> >
> > Signed-off-by: Aiman Rosli <muhammad.aiman.rosli@intel.com>
> > ---
> > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c | 39
> > +++++++++++++++++--
> > 1 file changed, 36 insertions(+), 3 deletions(-)
> >
> > diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> > b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> > index 662f9f483c..f5a3607e47 100644
> > --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> > +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> > @@ -1213,9 +1213,14 @@ SdCardIdentification (
> > UINT32 PresentState;
> > UINT8 HostCtrl2;
> > UINTN Retry;
> > + BOOLEAN ForceVoltage33;
> > +
> > + ForceVoltage33 = FALSE;
> >
> > PciIo = Private->PciIo;
> > PassThru = &Private->PassThru;
> > +
> > +Voltage33Retry:
> > //
> > // 1. Send Cmd0 to the device
> > //
> > @@ -1294,6 +1299,13 @@ SdCardIdentification (
> > return EFI_UNSUPPORTED;
> > }
> >
> > + //
> > + // 1.8V had failed in the previous run, forcing a retry with 3.3V
> > + instead // if (ForceVoltage33 == TRUE) {
> > + S18r = FALSE;
> > + }
> > +
> > //
> > // 5. Repeatly send Acmd41 with supply voltage window to the device.
> > // Note here we only support the cards complied with SD physical
> > @@ -1366,9 +1378,30 @@ SdCardIdentification (
> >
> > SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_PRESENT_STATE, TRUE,
> > sizeof (PresentState), &PresentState);
> > if (((PresentState >> 20) & 0xF) != 0xF) {
> > - DEBUG ((DEBUG_ERROR, "SdCardIdentification: SwitchVoltage fails
> with
> > PresentState = 0x%x, It should be 0xF\n", PresentState));
> > - Status = EFI_DEVICE_ERROR;
> > - goto Error;
> > + //
> > + // Delay 50 milliseconds in order for clock to stabilize,
> > + retry reading the
> > SD_MMC_HC_PRESENT_STATE
> > + //
> > + gBS->Stall (50000);
> > + SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_PRESENT_STATE, TRUE,
> > sizeof (PresentState), &PresentState);
> > + if (((PresentState >> 20) & 0xF) != 0xF) {
> > + DEBUG ((DEBUG_ERROR, "SdCardIdentification: SwitchVoltage
> > + fails
> > with PresentState = 0x%x, It should be 0xF\n", PresentState));
> > + //
> > + // Reset and reinitialize the slot before the 3.3V retry.
> > + //
> > + Status = SdMmcHcReset (Private, Slot);
> > + if (EFI_ERROR (Status)) {
> > + goto Error;
> > + }
> > +
> > + Status = SdMmcHcInitHost (Private, Slot);
> > + if (EFI_ERROR (Status)) {
> > + goto Error;
> > + }
> > +
> > + DEBUG ((DEBUG_ERROR, "SdCardIdentification: Switching to
> > + 1.8V
> > failed, forcing a retry with 3.3V instead\n"));
> > + ForceVoltage33 = TRUE;
> > + goto Voltage33Retry;
> > + }
> > }
> > }
> >
> > --
> > 2.34.1.windows.1
> >
> >
> >
> >
> >
>
>
>
>
>
prev parent reply other threads:[~2022-01-24 2:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-20 18:53 [PATCH v3] MdeModulePkg: Enabling OS boot from SD card through UEFI payload Aiman Rosli
2022-01-21 0:57 ` [edk2-devel] " Wu, Hao A
2022-01-24 2:02 ` Wu, Hao A [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM6PR11MB4025C50358F2A58EE3477F2FCA5E9@DM6PR11MB4025.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox