From: "Wu, Hao A" <hao.a.wu@intel.com>
To: "mikuback@linux.microsoft.com" <mikuback@linux.microsoft.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Bi, Dandan" <dandan.bi@intel.com>,
"Jiang, Guomin" <guomin.jiang@intel.com>,
"Wang, Jian J" <jian.j.wang@intel.com>,
"Gao, Liming" <gaoliming@byosoft.com.cn>,
"Ni, Ray" <ray.ni@intel.com>
Subject: Re: [PATCH v1 3/5] MdeModulePkg: Fix imbalanced debug macros
Date: Wed, 3 Aug 2022 01:29:25 +0000 [thread overview]
Message-ID: <DM6PR11MB4025DE2476AD5A5ACA9911EDCA9C9@DM6PR11MB4025.namprd11.prod.outlook.com> (raw)
In-Reply-To: <20220802180418.880-4-mikuback@linux.microsoft.com>
For changes in:
MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c
MdeModulePkg/Bus/Usb/UsbBusDxe/UsbEnumer.c
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Best Regards,
Hao Wu
> -----Original Message-----
> From: mikuback@linux.microsoft.com <mikuback@linux.microsoft.com>
> Sent: Wednesday, August 3, 2022 2:04 AM
> To: devel@edk2.groups.io
> Cc: Bi, Dandan <dandan.bi@intel.com>; Jiang, Guomin
> <guomin.jiang@intel.com>; Wu, Hao A <hao.a.wu@intel.com>; Wang, Jian J
> <jian.j.wang@intel.com>; Gao, Liming <gaoliming@byosoft.com.cn>; Ni, Ray
> <ray.ni@intel.com>
> Subject: [PATCH v1 3/5] MdeModulePkg: Fix imbalanced debug macros
>
> From: Michael Kubacki <michael.kubacki@microsoft.com>
>
> Updates debug macros in the package that have an imbalanced number of
> print specifiers to arguments. These changes try to preserve what was likely
> intended by the author. In cases information was missing due to the bug, the
> specifier may be removed since it was not previously accurately printing the
> expected value.
>
> Cc: Dandan Bi <dandan.bi@intel.com>
> Cc: Guomin Jiang <guomin.jiang@intel.com>
> Cc: Hao A Wu <hao.a.wu@intel.com>
> Cc: Jian J Wang <jian.j.wang@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Ray Ni <ray.ni@intel.com>
> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
> ---
> MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c
> | 2 +-
> MdeModulePkg/Bus/Usb/UsbBusDxe/UsbEnumer.c
> | 8 ++++----
> MdeModulePkg/Core/Dxe/Image/Image.c | 2 +-
>
> MdeModulePkg/Library/DisplayUpdateProgressLibGraphics/DisplayUpdateP
> rogressLibGraphics.c | 2 +-
> 4 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c
> b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c
> index 53b63ab52b93..dd45167a009e 100644
> --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c
> +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c
> @@ -64,7 +64,7 @@ DumpCapabilityReg (
> DEBUG ((DEBUG_INFO, " Driver Type D %a\n", Capability->DriverTypeD ?
> "TRUE" : "FALSE"));
> DEBUG ((DEBUG_INFO, " Driver Type 4 %a\n", Capability->DriverType4 ?
> "TRUE" : "FALSE"));
> if (Capability->TimerCount == 0) {
> - DEBUG ((DEBUG_INFO, " Retuning TimerCnt Disabled\n", 2 * (Capability-
> >TimerCount - 1)));
> + DEBUG ((DEBUG_INFO, " Retuning TimerCnt Disabled\n"));
> } else {
> DEBUG ((DEBUG_INFO, " Retuning TimerCnt %dseconds\n", 2 *
> (Capability->TimerCount - 1)));
> }
> diff --git a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbEnumer.c
> b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbEnumer.c
> index 5495b324b381..aed34596f469 100644
> --- a/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbEnumer.c
> +++ b/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbEnumer.c
> @@ -941,7 +941,7 @@ UsbEnumeratePort (
> // which probably is caused by short circuit. It has to wait system
> hardware
> // to perform recovery.
> //
> - DEBUG ((DEBUG_ERROR, "UsbEnumeratePort: Critical Over Current\n",
> Port));
> + DEBUG ((DEBUG_ERROR, "UsbEnumeratePort: Critical Over Current
> + (port %d)\n", Port));
> return EFI_DEVICE_ERROR;
> }
>
> @@ -951,7 +951,7 @@ UsbEnumeratePort (
> // over current. As a result, all ports are nearly power-off, so
> // it's necessary to detach and enumerate all ports again.
> //
> - DEBUG ((DEBUG_ERROR, "UsbEnumeratePort: 2.0 device Recovery Over
> Current\n", Port));
> + DEBUG ((DEBUG_ERROR, "UsbEnumeratePort: 2.0 device Recovery Over
> + Current (port %d)\n", Port));
> }
>
> if (USB_BIT_IS_SET (PortState.PortChangeStatus,
> USB_PORT_STAT_C_ENABLE)) { @@ -961,7 +961,7 @@ UsbEnumeratePort (
> // on 2.0 roothub does. When over-current has influence on 1.1 device,
> the port
> // would be disabled, so it's also necessary to detach and enumerate
> again.
> //
> - DEBUG ((DEBUG_ERROR, "UsbEnumeratePort: 1.1 device Recovery Over
> Current\n", Port));
> + DEBUG ((DEBUG_ERROR, "UsbEnumeratePort: 1.1 device Recovery Over
> + Current (port %d)\n", Port));
> }
>
> if (USB_BIT_IS_SET (PortState.PortChangeStatus,
> USB_PORT_STAT_C_CONNECTION)) { @@ -969,7 +969,7 @@
> UsbEnumeratePort (
> // Case4:
> // Device connected or disconnected normally.
> //
> - DEBUG ((DEBUG_INFO, "UsbEnumeratePort: Device Connect/Disconnect
> Normally\n", Port));
> + DEBUG ((DEBUG_INFO, "UsbEnumeratePort: Device Connect/Disconnect
> + Normally (port %d)\n", Port));
> }
>
> //
> diff --git a/MdeModulePkg/Core/Dxe/Image/Image.c
> b/MdeModulePkg/Core/Dxe/Image/Image.c
> index 68bde5c15c52..06cc6744b8c6 100644
> --- a/MdeModulePkg/Core/Dxe/Image/Image.c
> +++ b/MdeModulePkg/Core/Dxe/Image/Image.c
> @@ -1741,7 +1741,7 @@ CoreStartImage (
> if ((Image->ExitDataSize != 0) || (Image->ExitData != NULL)) {
> DEBUG ((DEBUG_LOAD, "StartImage: ExitDataSize %d, ExitData %p",
> (UINT32)Image->ExitDataSize, Image->ExitData));
> if (Image->ExitData != NULL) {
> - DEBUG ((DEBUG_LOAD, " (%hs)", Image->ExitData));
> + DEBUG ((DEBUG_LOAD, " (%s)", Image->ExitData));
> }
>
> DEBUG ((DEBUG_LOAD, "\n"));
> diff --git
> a/MdeModulePkg/Library/DisplayUpdateProgressLibGraphics/DisplayUpdat
> eProgressLibGraphics.c
> b/MdeModulePkg/Library/DisplayUpdateProgressLibGraphics/DisplayUpdat
> eProgressLibGraphics.c
> index 83053464e06e..6b012fed35db 100644
> ---
> a/MdeModulePkg/Library/DisplayUpdateProgressLibGraphics/DisplayUpdat
> eProgressLibGraphics.c
> +++
> b/MdeModulePkg/Library/DisplayUpdateProgressLibGraphics/DisplayUpdat
> +++ eProgressLibGraphics.c
> @@ -148,7 +148,7 @@ FindDim (
> (VOID **)&BootLogo
> );
> if ((BootLogo == NULL) || (EFI_ERROR (Status))) {
> - DEBUG ((DEBUG_ERROR, "Failed to locate gEdkiiBootLogo2ProtocolGuid.
> No Progress bar support. \n", Status));
> + DEBUG ((DEBUG_ERROR, "Failed to locate gEdkiiBootLogo2ProtocolGuid
> + Status = %r. No Progress bar support. \n", Status));
> return;
> }
>
> --
> 2.28.0.windows.1
next prev parent reply other threads:[~2022-08-03 1:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-02 18:04 [PATCH v1 0/5] Fix imbalanced debug macros Michael Kubacki
2022-08-02 18:04 ` [PATCH v1 1/5] ArmPlatformPkg/NorFlashDxe: Remove unused debug print specifier Michael Kubacki
2022-08-03 6:23 ` Ard Biesheuvel
2022-08-02 18:04 ` [PATCH v1 2/5] FatPkg/FatPei: Remove extraneous debug message argument Michael Kubacki
2022-08-02 18:04 ` [PATCH v1 3/5] MdeModulePkg: Fix imbalanced debug macros Michael Kubacki
2022-08-03 1:29 ` Wu, Hao A [this message]
2022-08-05 2:51 ` 回复: " gaoliming
2022-08-02 18:04 ` [PATCH v1 4/5] RedfishPkg/RedfishRestExDxe: Remove extra debug macro argument Michael Kubacki
2022-08-03 0:48 ` Chang, Abner
2022-08-02 18:04 ` [PATCH v1 5/5] SecurityPkg/SmmTcg2PhysicalPresenceLib: Add missing debug print specifier Michael Kubacki
2022-08-02 23:43 ` Yao, Jiewen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM6PR11MB4025DE2476AD5A5ACA9911EDCA9C9@DM6PR11MB4025.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox