public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
* [PATCH v3] MdeModulePkg: Enabling OS boot from SD card through UEFI payload
@ 2022-01-20 18:53 Aiman Rosli
  2022-01-21  0:57 ` [edk2-devel] " Wu, Hao A
  0 siblings, 1 reply; 3+ messages in thread
From: Aiman Rosli @ 2022-01-20 18:53 UTC (permalink / raw)
  To: devel; +Cc: Aiman Rosli

This changes is by adding 50ms delay during voltage switching from 3.3V to 1.8V,
plus adding a goto Voltage33Retry for 3.3V checking and retrying.

Signed-off-by: Aiman Rosli <muhammad.aiman.rosli@intel.com>
---
 MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c | 39 +++++++++++++++++--
 1 file changed, 36 insertions(+), 3 deletions(-)

diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
index 662f9f483c..f5a3607e47 100644
--- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
+++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
@@ -1213,9 +1213,14 @@ SdCardIdentification (
   UINT32                         PresentState;
   UINT8                          HostCtrl2;
   UINTN                          Retry;
+  BOOLEAN                        ForceVoltage33;
+
+  ForceVoltage33 = FALSE;
 
   PciIo    = Private->PciIo;
   PassThru = &Private->PassThru;
+
+Voltage33Retry:
   //
   // 1. Send Cmd0 to the device
   //
@@ -1294,6 +1299,13 @@ SdCardIdentification (
     return EFI_UNSUPPORTED;
   }
 
+  //
+  // 1.8V had failed in the previous run, forcing a retry with 3.3V instead
+  //
+  if (ForceVoltage33 == TRUE) {
+    S18r = FALSE;
+  }
+
   //
   // 5. Repeatly send Acmd41 with supply voltage window to the device.
   //    Note here we only support the cards complied with SD physical
@@ -1366,9 +1378,30 @@ SdCardIdentification (
 
       SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_PRESENT_STATE, TRUE, sizeof (PresentState), &PresentState);
       if (((PresentState >> 20) & 0xF) != 0xF) {
-        DEBUG ((DEBUG_ERROR, "SdCardIdentification: SwitchVoltage fails with PresentState = 0x%x, It should be 0xF\n", PresentState));
-        Status = EFI_DEVICE_ERROR;
-        goto Error;
+        //
+        // Delay 50 milliseconds in order for clock to stabilize, retry reading the SD_MMC_HC_PRESENT_STATE
+        //
+        gBS->Stall (50000);
+        SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_PRESENT_STATE, TRUE, sizeof (PresentState), &PresentState);
+        if (((PresentState >> 20) & 0xF) != 0xF) {
+          DEBUG ((DEBUG_ERROR, "SdCardIdentification: SwitchVoltage fails with PresentState = 0x%x, It should be 0xF\n", PresentState));
+          //
+          // Reset and reinitialize the slot before the 3.3V retry.
+          //
+          Status = SdMmcHcReset (Private, Slot);
+          if (EFI_ERROR (Status)) {
+            goto Error;
+          }
+
+          Status = SdMmcHcInitHost (Private, Slot);
+          if (EFI_ERROR (Status)) {
+            goto Error;
+          }
+
+          DEBUG ((DEBUG_ERROR, "SdCardIdentification: Switching to 1.8V failed, forcing a retry with 3.3V instead\n"));
+          ForceVoltage33 = TRUE;
+          goto Voltage33Retry;
+        }
       }
     }
 
-- 
2.34.1.windows.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [edk2-devel] [PATCH v3] MdeModulePkg: Enabling OS boot from SD card through UEFI payload
  2022-01-20 18:53 [PATCH v3] MdeModulePkg: Enabling OS boot from SD card through UEFI payload Aiman Rosli
@ 2022-01-21  0:57 ` Wu, Hao A
  2022-01-24  2:02   ` Wu, Hao A
  0 siblings, 1 reply; 3+ messages in thread
From: Wu, Hao A @ 2022-01-21  0:57 UTC (permalink / raw)
  To: devel@edk2.groups.io, Rosli, Muhammad Aiman, Wang, Jian J,
	Gao, Liming, Ni, Ray

(Add missing maintainers/reviewers)

Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Will wait until early next week for the merging to see if any comment from other reviewers.

Best Regards,
Hao Wu

> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Aiman
> Rosli
> Sent: Friday, January 21, 2022 2:53 AM
> To: devel@edk2.groups.io
> Cc: Rosli, Muhammad Aiman <muhammad.aiman.rosli@intel.com>
> Subject: [edk2-devel] [PATCH v3] MdeModulePkg: Enabling OS boot from SD
> card through UEFI payload
> 
> This changes is by adding 50ms delay during voltage switching from 3.3V to
> 1.8V, plus adding a goto Voltage33Retry for 3.3V checking and retrying.
> 
> Signed-off-by: Aiman Rosli <muhammad.aiman.rosli@intel.com>
> ---
>  MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c | 39
> +++++++++++++++++--
>  1 file changed, 36 insertions(+), 3 deletions(-)
> 
> diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> index 662f9f483c..f5a3607e47 100644
> --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> @@ -1213,9 +1213,14 @@ SdCardIdentification (
>    UINT32                         PresentState;
>    UINT8                          HostCtrl2;
>    UINTN                          Retry;
> +  BOOLEAN                        ForceVoltage33;
> +
> +  ForceVoltage33 = FALSE;
> 
>    PciIo    = Private->PciIo;
>    PassThru = &Private->PassThru;
> +
> +Voltage33Retry:
>    //
>    // 1. Send Cmd0 to the device
>    //
> @@ -1294,6 +1299,13 @@ SdCardIdentification (
>      return EFI_UNSUPPORTED;
>    }
> 
> +  //
> +  // 1.8V had failed in the previous run, forcing a retry with 3.3V
> + instead  //  if (ForceVoltage33 == TRUE) {
> +    S18r = FALSE;
> +  }
> +
>    //
>    // 5. Repeatly send Acmd41 with supply voltage window to the device.
>    //    Note here we only support the cards complied with SD physical
> @@ -1366,9 +1378,30 @@ SdCardIdentification (
> 
>        SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_PRESENT_STATE, TRUE,
> sizeof (PresentState), &PresentState);
>        if (((PresentState >> 20) & 0xF) != 0xF) {
> -        DEBUG ((DEBUG_ERROR, "SdCardIdentification: SwitchVoltage fails with
> PresentState = 0x%x, It should be 0xF\n", PresentState));
> -        Status = EFI_DEVICE_ERROR;
> -        goto Error;
> +        //
> +        // Delay 50 milliseconds in order for clock to stabilize, retry reading the
> SD_MMC_HC_PRESENT_STATE
> +        //
> +        gBS->Stall (50000);
> +        SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_PRESENT_STATE, TRUE,
> sizeof (PresentState), &PresentState);
> +        if (((PresentState >> 20) & 0xF) != 0xF) {
> +          DEBUG ((DEBUG_ERROR, "SdCardIdentification: SwitchVoltage fails
> with PresentState = 0x%x, It should be 0xF\n", PresentState));
> +          //
> +          // Reset and reinitialize the slot before the 3.3V retry.
> +          //
> +          Status = SdMmcHcReset (Private, Slot);
> +          if (EFI_ERROR (Status)) {
> +            goto Error;
> +          }
> +
> +          Status = SdMmcHcInitHost (Private, Slot);
> +          if (EFI_ERROR (Status)) {
> +            goto Error;
> +          }
> +
> +          DEBUG ((DEBUG_ERROR, "SdCardIdentification: Switching to 1.8V
> failed, forcing a retry with 3.3V instead\n"));
> +          ForceVoltage33 = TRUE;
> +          goto Voltage33Retry;
> +        }
>        }
>      }
> 
> --
> 2.34.1.windows.1
> 
> 
> 
> 
> 


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [edk2-devel] [PATCH v3] MdeModulePkg: Enabling OS boot from SD card through UEFI payload
  2022-01-21  0:57 ` [edk2-devel] " Wu, Hao A
@ 2022-01-24  2:02   ` Wu, Hao A
  0 siblings, 0 replies; 3+ messages in thread
From: Wu, Hao A @ 2022-01-24  2:02 UTC (permalink / raw)
  To: devel@edk2.groups.io, Wu, Hao A, Rosli, Muhammad Aiman,
	Wang, Jian J, Gao, Liming, Ni, Ray

Change the subject of the commit to "MdeModulePkg/SdMmcPciHcDxe: Robust improvements for SD card 1.8V switch" in order to better reflect the purpose of the change.

Patch merged via:
PR - https://github.com/tianocore/edk2/pull/2438
Commit - https://github.com/tianocore/edk2/commit/7e5c603cba0823fd97456984f4cfc21c4c831b52

Best Regards,
Hao Wu

> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Wu, Hao
> A
> Sent: Friday, January 21, 2022 8:57 AM
> To: devel@edk2.groups.io; Rosli, Muhammad Aiman
> <muhammad.aiman.rosli@intel.com>; Wang, Jian J <jian.j.wang@intel.com>;
> Gao, Liming <gaoliming@byosoft.com.cn>; Ni, Ray <ray.ni@intel.com>
> Subject: Re: [edk2-devel] [PATCH v3] MdeModulePkg: Enabling OS boot
> from SD card through UEFI payload
> 
> (Add missing maintainers/reviewers)
> 
> Reviewed-by: Hao A Wu <hao.a.wu@intel.com> Will wait until early next
> week for the merging to see if any comment from other reviewers.
> 
> Best Regards,
> Hao Wu
> 
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Aiman
> > Rosli
> > Sent: Friday, January 21, 2022 2:53 AM
> > To: devel@edk2.groups.io
> > Cc: Rosli, Muhammad Aiman <muhammad.aiman.rosli@intel.com>
> > Subject: [edk2-devel] [PATCH v3] MdeModulePkg: Enabling OS boot from
> > SD card through UEFI payload
> >
> > This changes is by adding 50ms delay during voltage switching from
> > 3.3V to 1.8V, plus adding a goto Voltage33Retry for 3.3V checking and
> retrying.
> >
> > Signed-off-by: Aiman Rosli <muhammad.aiman.rosli@intel.com>
> > ---
> >  MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c | 39
> > +++++++++++++++++--
> >  1 file changed, 36 insertions(+), 3 deletions(-)
> >
> > diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> > b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> > index 662f9f483c..f5a3607e47 100644
> > --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> > +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdDevice.c
> > @@ -1213,9 +1213,14 @@ SdCardIdentification (
> >    UINT32                         PresentState;
> >    UINT8                          HostCtrl2;
> >    UINTN                          Retry;
> > +  BOOLEAN                        ForceVoltage33;
> > +
> > +  ForceVoltage33 = FALSE;
> >
> >    PciIo    = Private->PciIo;
> >    PassThru = &Private->PassThru;
> > +
> > +Voltage33Retry:
> >    //
> >    // 1. Send Cmd0 to the device
> >    //
> > @@ -1294,6 +1299,13 @@ SdCardIdentification (
> >      return EFI_UNSUPPORTED;
> >    }
> >
> > +  //
> > +  // 1.8V had failed in the previous run, forcing a retry with 3.3V
> > + instead  //  if (ForceVoltage33 == TRUE) {
> > +    S18r = FALSE;
> > +  }
> > +
> >    //
> >    // 5. Repeatly send Acmd41 with supply voltage window to the device.
> >    //    Note here we only support the cards complied with SD physical
> > @@ -1366,9 +1378,30 @@ SdCardIdentification (
> >
> >        SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_PRESENT_STATE, TRUE,
> > sizeof (PresentState), &PresentState);
> >        if (((PresentState >> 20) & 0xF) != 0xF) {
> > -        DEBUG ((DEBUG_ERROR, "SdCardIdentification: SwitchVoltage fails
> with
> > PresentState = 0x%x, It should be 0xF\n", PresentState));
> > -        Status = EFI_DEVICE_ERROR;
> > -        goto Error;
> > +        //
> > +        // Delay 50 milliseconds in order for clock to stabilize,
> > + retry reading the
> > SD_MMC_HC_PRESENT_STATE
> > +        //
> > +        gBS->Stall (50000);
> > +        SdMmcHcRwMmio (PciIo, Slot, SD_MMC_HC_PRESENT_STATE, TRUE,
> > sizeof (PresentState), &PresentState);
> > +        if (((PresentState >> 20) & 0xF) != 0xF) {
> > +          DEBUG ((DEBUG_ERROR, "SdCardIdentification: SwitchVoltage
> > + fails
> > with PresentState = 0x%x, It should be 0xF\n", PresentState));
> > +          //
> > +          // Reset and reinitialize the slot before the 3.3V retry.
> > +          //
> > +          Status = SdMmcHcReset (Private, Slot);
> > +          if (EFI_ERROR (Status)) {
> > +            goto Error;
> > +          }
> > +
> > +          Status = SdMmcHcInitHost (Private, Slot);
> > +          if (EFI_ERROR (Status)) {
> > +            goto Error;
> > +          }
> > +
> > +          DEBUG ((DEBUG_ERROR, "SdCardIdentification: Switching to
> > + 1.8V
> > failed, forcing a retry with 3.3V instead\n"));
> > +          ForceVoltage33 = TRUE;
> > +          goto Voltage33Retry;
> > +        }
> >        }
> >      }
> >
> > --
> > 2.34.1.windows.1
> >
> >
> >
> >
> >
> 
> 
> 
> 
> 


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2022-01-24  2:02 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-01-20 18:53 [PATCH v3] MdeModulePkg: Enabling OS boot from SD card through UEFI payload Aiman Rosli
2022-01-21  0:57 ` [edk2-devel] " Wu, Hao A
2022-01-24  2:02   ` Wu, Hao A

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox