From: "Gao, Zhichao" <zhichao.gao@intel.com>
To: Krzysztof Koch <Krzysztof.Koch@arm.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>,
"Ni, Ray" <ray.ni@intel.com>
Cc: Sami Mujawar <Sami.Mujawar@arm.com>,
Matteo Carlini <Matteo.Carlini@arm.com>,
Laura Moretta <Laura.Moretta@arm.com>, nd <nd@arm.com>
Subject: Re: [edk2-devel] [PATCH v1 0/3] Check if required ACPI tables are installed
Date: Thu, 7 May 2020 02:22:07 +0000 [thread overview]
Message-ID: <DM6PR11MB4425B2235602C45DCEE2D246F6A50@DM6PR11MB4425.namprd11.prod.outlook.com> (raw)
In-Reply-To: <AM5PR0801MB1777CC519FE0BDFFA57C003D84AB0@AM5PR0801MB1777.eurprd08.prod.outlook.com>
Pushed at 8af507c1f16d9cc311e83397881016e3887acfbb.. faef5a367c8345df906be3755e15e0dabc3105b3
> -----Original Message-----
> From: Krzysztof Koch <Krzysztof.Koch@arm.com>
> Sent: Friday, May 1, 2020 7:27 PM
> To: devel@edk2.groups.io; Gao, Zhichao <zhichao.gao@intel.com>; Ni, Ray
> <ray.ni@intel.com>
> Cc: Sami Mujawar <Sami.Mujawar@arm.com>; Matteo Carlini
> <Matteo.Carlini@arm.com>; Laura Moretta <Laura.Moretta@arm.com>; nd
> <nd@arm.com>
> Subject: RE: [edk2-devel] [PATCH v1 0/3] Check if required ACPI tables are
> installed
>
> Hi Zhichao,
>
> Any idea when this patch set will get merged?
>
> Kind regards,
>
> Krzysztof
>
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Gao, Zhichao
> via groups.io
> Sent: Friday, April 17, 2020 8:20
> To: Krzysztof Koch <Krzysztof.Koch@arm.com>; devel@edk2.groups.io; Ni, Ray
> <ray.ni@intel.com>
> Cc: Sami Mujawar <Sami.Mujawar@arm.com>; Matteo Carlini
> <Matteo.Carlini@arm.com>; Laura Moretta <Laura.Moretta@arm.com>; nd
> <nd@arm.com>
> Subject: Re: [edk2-devel] [PATCH v1 0/3] Check if required ACPI tables are
> installed
>
> For the patch set:
> Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
>
> Thanks,
> Zhichao
>
> > -----Original Message-----
> > From: Krzysztof Koch <Krzysztof.Koch@arm.com>
> > Sent: Tuesday, April 14, 2020 4:50 PM
> > To: devel@edk2.groups.io; Ni, Ray <ray.ni@intel.com>; Gao, Zhichao
> > <zhichao.gao@intel.com>
> > Cc: Sami Mujawar <Sami.Mujawar@arm.com>; Matteo Carlini
> > <Matteo.Carlini@arm.com>; Laura Moretta <Laura.Moretta@arm.com>; nd
> > <nd@arm.com>
> > Subject: RE: [edk2-devel] [PATCH v1 0/3] Check if required ACPI tables
> > are installed
> >
> > Hi,
> >
> > Can I get a review for this patch series?
> >
> > Thanks,
> >
> > Krzysztof
> >
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > Krzysztof Koch via Groups.Io
> > Sent: Wednesday, March 25, 2020 9:39
> > To: devel@edk2.groups.io
> > Cc: ray.ni@intel.com; zhichao.gao@intel.com; Sami Mujawar
> > <Sami.Mujawar@arm.com>; Matteo Carlini <Matteo.Carlini@arm.com>;
> Laura
> > Moretta <Laura.Moretta@arm.com>; nd <nd@arm.com>
> > Subject: [edk2-devel] [PATCH v1 0/3] Check if required ACPI tables are
> > installed
> >
> > This patch series adds a new capability to the Acpiview UEFI shell tool.
> > Using the -r command line parameter, it is now possible to choose a
> > specification which lists mandatory ACPI tables. The parameter value
> > is then consumed by a library which validates ACPI tables identified
> > on the platform against these requirements.
> >
> > The -r parameter is architecture agnostic. However, as of now, the
> > possible values for the parameter are only defined in the context of
> > the Arm architecture.
> >
> > For Arm-based platforms, it is now possible to validate that Server
> > Base Boot Requirements (SBBR) mandatory ACPI tables are present on the
> platform.
> >
> > Changes can be seen at:
> > https://github.com/KrzysztofKoch1/edk2/tree/617_sbbr_validate_acpi_tab
> > l
> > e_counts_v1
> >
> > Krzysztof Koch (3):
> > ShellPkg: acpiview: Add -r parameter for table requirements validation
> > ShellPkg: acpiview: Add library for SBBR ACPI requirements validation
> > ShellPkg: acpiview: Check if SBBR mandatory ACPI tables are
> > installed
> >
> > ShellPkg/Library/UefiShellAcpiViewCommandLib/AcpiTableParser.c |
> > 16 ++
> > ShellPkg/Library/UefiShellAcpiViewCommandLib/AcpiView.c | 104
> > ++++++++-
> > ShellPkg/Library/UefiShellAcpiViewCommandLib/AcpiView.h | 44
> > +++-
> > ShellPkg/Library/UefiShellAcpiViewCommandLib/Arm/SbbrValidator.c
> > | 222 ++++++++++++++++++++
> > ShellPkg/Library/UefiShellAcpiViewCommandLib/Arm/SbbrValidator.h
> > | 91 ++++++++
> >
> > ShellPkg/Library/UefiShellAcpiViewCommandLib/UefiShellAcpiViewComman
> > dLib.inf | 6 +-
> >
> > ShellPkg/Library/UefiShellAcpiViewCommandLib/UefiShellAcpiViewComman
> > dLib.uni | 14 +-
> > 7 files changed, 492 insertions(+), 5 deletions(-) create mode
> > 100644
> > ShellPkg/Library/UefiShellAcpiViewCommandLib/Arm/SbbrValidator.c
> > create mode 100644
> > ShellPkg/Library/UefiShellAcpiViewCommandLib/Arm/SbbrValidator.h
> >
> > --
> > 'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
> >
> >
> >
>
>
>
prev parent reply other threads:[~2020-05-07 2:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <15FF82990C57A035.32445@groups.io>
2020-04-14 8:50 ` [edk2-devel] [PATCH v1 0/3] Check if required ACPI tables are installed Krzysztof Koch
2020-04-17 7:20 ` Gao, Zhichao
2020-05-01 11:26 ` Krzysztof Koch
2020-05-07 2:22 ` Gao, Zhichao [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM6PR11MB4425B2235602C45DCEE2D246F6A50@DM6PR11MB4425.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox