From: "Jeff Brasen" <jbrasen@nvidia.com>
To: Pierre Gondois <pierre.gondois@arm.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Sami.Mujawar@arm.com" <Sami.Mujawar@arm.com>,
"Alexei.Fedorov@arm.com" <Alexei.Fedorov@arm.com>
Subject: Re: [PATCH 4/4] DynamicTablesPkg: AcpiSsdtPcieLibArm: Add support for override protocol
Date: Fri, 8 Jul 2022 15:36:38 +0000 [thread overview]
Message-ID: <DS7PR12MB5789F3F0EDF19EE4983B25DDCB829@DS7PR12MB5789.namprd12.prod.outlook.com> (raw)
In-Reply-To: <dcd408c2-aaa9-dc6b-a809-1ea1a6ed8b06@arm.com>
I think this would work. Instead of GeneratePciDeviceInfo the function we would want to break out would be GeneratePciSlots. I'll work on changing my patch series to this. Unless you have a better name will call this library SsdtPciSupportLib and place in under Library/Common
Going to also pass PciInfo into AddOscMethod in this new approach in case client needs to have different _OSC per controller (And to GeneratePciSlots as well).
Thanks,
Jeff
> -----Original Message-----
> From: Pierre Gondois <pierre.gondois@arm.com>
> Sent: Monday, July 4, 2022 2:48 AM
> To: Jeff Brasen <jbrasen@nvidia.com>; devel@edk2.groups.io
> Cc: Sami.Mujawar@arm.com; Alexei.Fedorov@arm.com
> Subject: Re: [PATCH 4/4] DynamicTablesPkg: AcpiSsdtPcieLibArm: Add
> support for override protocol
>
> External email: Use caution opening links or attachments
>
>
> Hello Jeff,
> I think it would ideally be better to have the code adding/replacing the
> methods/objects you noted inside the edk2/edk2-platfoms repositories. The
> methods/objects that you want to replace seem to only concern:
> -the objects available in the 'Device (PCIx)' node -the _OSC method
>
> If a library with the following two methods (extracted from
> SsdtPcieLibArm.inf) was created, would it be sufficient for all the
> replacements you want to do ?
> Like this we would have a generic implementation and specific ones.
>
> EFI_STATUS
> EFIAPI
> GeneratePciDeviceInfo (
> IN CONST CM_ARM_PCI_CONFIG_SPACE_INFO *PciInfo,
> IN UINT32 Uid,
> IN OUT AML_OBJECT_NODE_HANDLE PciNode
> )
>
> EFI_STATUS
> EFIAPI
> AddOscMethod (
> IN OUT AML_OBJECT_NODE_HANDLE PciNode
> )
>
> Regards,
> Pierre
>
> On 7/1/22 17:52, Jeff Brasen wrote:
> > Currently we do the following in this call.
> >
> > Remove and replace the _OSC method on certain targets. I originally
> > had this pass the template over but removed that when I added this
> > more generic override support Add a _RST method to the root port
> > device sub node Add a _DSD for device properties Conditionally add an
> > entry for the device attached to the PCIe bus if we need to add
> > properties or _RST methods. This will likely eventually move to
> > another driver (which is the purpose of patch 2/4 in this series)
> >
> > I figured trying to get the generator to handle that would be more difficult
> as these would be hard to generalize.
> >
> >
> > Thanks,
> > Jeff
> >
> >> -----Original Message-----
> >> From: Pierre Gondois <pierre.gondois@arm.com>
> >> Sent: Friday, July 1, 2022 6:40 AM
> >> To: Jeff Brasen <jbrasen@nvidia.com>; devel@edk2.groups.io
> >> Cc: Sami.Mujawar@arm.com; Alexei.Fedorov@arm.com
> >> Subject: Re: [PATCH 4/4] DynamicTablesPkg: AcpiSsdtPcieLibArm: Add
> >> support for override protocol
> >>
> >> External email: Use caution opening links or attachments
> >>
> >>
> >> Hello Jeff,
> >> Is it possible to know what the UpdateTable() function would do ?
> >> Maybe it would be possible to integrate the alternative
> >> implementation without adding a new protocol.
> >>
> >> Regards,
> >> Pierre
> >>
> >> On 6/30/22 17:48, Jeff Brasen wrote:
> >>> Some platfoms may want to modify the ACPI table created.
> >>> Add support for protocol that can provide an alternative
> implementation.
> >>>
> >>> Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
> >>> ---
> >>> DynamicTablesPkg/DynamicTablesPkg.dec | 3 +
> >>> .../Protocol/SsdtPcieOverrideProtocol.h | 63
> +++++++++++++++++++
> >>> .../AcpiSsdtPcieLibArm/SsdtPcieGenerator.c | 31 ++++++++-
> >>> .../Arm/AcpiSsdtPcieLibArm/SsdtPcieLibArm.inf | 4 ++
> >>> 4 files changed, 98 insertions(+), 3 deletions(-)
> >>> create mode 100644
> >>> DynamicTablesPkg/Include/Protocol/SsdtPcieOverrideProtocol.h
> >>>
> >>> diff --git a/DynamicTablesPkg/DynamicTablesPkg.dec
> >>> b/DynamicTablesPkg/DynamicTablesPkg.dec
> >>> index a890a048be..bb66bdaf14 100644
> >>> --- a/DynamicTablesPkg/DynamicTablesPkg.dec
> >>> +++ b/DynamicTablesPkg/DynamicTablesPkg.dec
> >>> @@ -43,6 +43,9 @@
> >>> # Dynamic Table Factory Protocol GUID
> >>> gEdkiiDynamicTableFactoryProtocolGuid = { 0x91d1e327, 0xfe5a,
> >>> 0x49b8, { 0xab, 0x65, 0xe, 0xce, 0x2d, 0xdb, 0x45, 0xec } }
> >>>
> >>> + # Protocol to override PCI SSDT table generation
> >>> + gEdkiiDynamicTableSsdtPcieOverrideProtocolGuid = { 0x962e8b44,
> >>> + 0x23b3, 0x41da, { 0x9f, 0x36, 0xca, 0xde, 0x68, 0x49, 0xfb, 0xf6 }
> >>> + }
> >>> +
> >>> [PcdsFixedAtBuild]
> >>>
> >>> # Maximum number of Custom ACPI Generators diff --git
> >>> a/DynamicTablesPkg/Include/Protocol/SsdtPcieOverrideProtocol.h
> >>> b/DynamicTablesPkg/Include/Protocol/SsdtPcieOverrideProtocol.h
> >>> new file mode 100644
> >>> index 0000000000..29568a0159
> >>> --- /dev/null
> >>> +++ b/DynamicTablesPkg/Include/Protocol/SsdtPcieOverrideProtocol.h
> >>> @@ -0,0 +1,63 @@
> >>> +/** @file
> >>> +
> >>> + Copyright (c) 2022, NVIDIA CORPORATION. All rights reserved.
> >>> +
> >>> + SPDX-License-Identifier: BSD-2-Clause-Patent
> >>> +
> >>> +**/
> >>> +
> >>> +#ifndef SSDT_PCIE_OVERRIDE_PROTOCOL_H_ #define
> >>> +SSDT_PCIE_OVERRIDE_PROTOCOL_H_
> >>> +
> >>> +#include <ArmNameSpaceObjects.h>
> >>> +#include <Library/AmlLib/AmlLib.h>
> >>> +
> >>> +/** This macro defines the SSDT PCI Override Protocol GUID.
> >>> +
> >>> + GUID: {D85A4835-5A82-4894-AC02-706F43D5978E}
> >>> +*/
> >>> +#define EDKII_SSDT_PCI_OVERRIDE_PROTOCOL_GUID \
> >>> + { 0x962e8b44, 0x23b3, 0x41da, \
> >>> + { 0x9f, 0x36, 0xca, 0xde, 0x68, 0x49, 0xfb, 0xf6 } \
> >>> + };
> >>> +
> >>> +/**
> >>> + Forward declarations:
> >>> +*/
> >>> +typedef struct SsdtOverridePciProtocol
> >>> +EDKII_SSDT_PCI_OVERRIDE_PROTOCOL;
> >>> +
> >>> +/** The UpdateTable function allows the override protocol to update
> the
> >>> + * PCIe SSDT table prior to being created.
> >>> +
> >>> + @param [in] This Pointer to the SSDT PCI Override Protocol.
> >>> + @param [in] PciInfo The PCIe configuration info for this node.
> >>> + @param [in] Uid UID that was selected for this PCIe node.
> >>> + @param [in, out] PciNode Pointer to the PCI node of this ACPI table.
> >>> +
> >>> + @retval EFI_SUCCESS Success.
> >>> + @retval EFI_INVALID_PARAMETER A parameter is invalid.
> >>> + @retval EFI_DEVICE_ERROR Failed to update the table.
> >>> +**/
> >>> +typedef
> >>> +EFI_STATUS
> >>> +(EFIAPI *EDKII_SSDT_PCI_OVERRIDE_PROTOCOL_UPDATE_TABLE)(
> >>> + IN CONST EDKII_SSDT_PCI_OVERRIDE_PROTOCOL *CONST This,
> >>> + IN CONST CM_ARM_PCI_CONFIG_SPACE_INFO *PciInfo,
> >>> + IN UINT32 Uid,
> >>> + IN OUT AML_ROOT_NODE_HANDLE *PciNode
> >>> + );
> >>> +
> >>> +/** The EDKII_CONFIGURATION_MANAGER_PROTOCOL structure
> >> describes the
> >>> + Configuration Manager Protocol interface.
> >>> +*/
> >>> +typedef struct SsdtOverridePciProtocol {
> >>> + /** The interface used to update the ACPI table for PCI.
> >>> + */
> >>> + EDKII_SSDT_PCI_OVERRIDE_PROTOCOL_UPDATE_TABLE
> UpdateTable;
> >>> +} EDKII_SSDT_PCI_OVERRIDE_PROTOCOL;
> >>> +
> >>> +/** The SSDT PCI Override Protocol GUID.
> >>> +*/
> >>> +extern EFI_GUID gEdkiiDynamicTableSsdtPcieOverrideProtocolGuid;
> >>> +
> >>> +#endif // SSDT_PCIE_OVERRIDE_PROTOCOL_H_
> >>> diff --git
> >>>
> >>
> a/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtPcieLibArm/SsdtPcieGenera
> >> t
> >>> or.c
> >>>
> >>
> b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtPcieLibArm/SsdtPcieGenera
> >> t
> >>> or.c
> >>> index c5b23d91d0..d5982c24ff 100644
> >>> ---
> >>>
> >>
> a/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtPcieLibArm/SsdtPcieGenera
> >> t
> >>> or.c
> >>> +++
> >> b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtPcieLibArm/SsdtPcieGen
> >>> +++ erator.c
> >>> @@ -20,6 +20,7 @@
> >>> #include <Library/BaseMemoryLib.h>
> >>> #include <Library/DebugLib.h>
> >>> #include <Library/MemoryAllocationLib.h>
> >>> +#include <Library/UefiBootServicesTableLib.h>
> >>> #include <Protocol/AcpiTable.h>
> >>>
> >>> // Module specific include files.
> >>> @@ -30,6 +31,7 @@
> >>> #include <Library/TableHelperLib.h>
> >>> #include <Library/AmlLib/AmlLib.h>
> >>> #include <Protocol/ConfigurationManagerProtocol.h>
> >>> +#include <Protocol/SsdtPcieOverrideProtocol.h>
> >>>
> >>> #include "SsdtPcieGenerator.h"
> >>>
> >>> @@ -798,9 +800,10 @@ GeneratePciDevice (
> >>> {
> >>> EFI_STATUS Status;
> >>>
> >>> - CHAR8 AslName[AML_NAME_SEG_SIZE + 1];
> >>> - AML_OBJECT_NODE_HANDLE ScopeNode;
> >>> - AML_OBJECT_NODE_HANDLE PciNode;
> >>> + CHAR8 AslName[AML_NAME_SEG_SIZE + 1];
> >>> + AML_OBJECT_NODE_HANDLE ScopeNode;
> >>> + AML_OBJECT_NODE_HANDLE PciNode;
> >>> + EDKII_SSDT_PCI_OVERRIDE_PROTOCOL *OverrideProtocol;
> >>>
> >>> ASSERT (Generator != NULL);
> >>> ASSERT (CfgMgrProtocol != NULL); @@ -860,6 +863,28 @@
> >>> GeneratePciDevice (
> >>>
> >>> // Add the template _OSC method.
> >>> Status = AddOscMethod (PciNode);
> >>> + if (EFI_ERROR (Status)) {
> >>> + ASSERT (0);
> >>> + return Status;
> >>> + }
> >>> +
> >>> + Status = gBS->LocateProtocol (
> >>> + &gEdkiiDynamicTableSsdtPcieOverrideProtocolGuid,
> >>> + NULL,
> >>> + (VOID **)&OverrideProtocol
> >>> + );
> >>> + if (!EFI_ERROR (Status)) {
> >>> + Status = OverrideProtocol->UpdateTable (
> >>> + OverrideProtocol,
> >>> + PciInfo,
> >>> + Uid,
> >>> + PciNode
> >>> + ); } else {
> >>> + // Not an error if override protocol is not found
> >>> + Status = EFI_SUCCESS;
> >>> + }
> >>> +
> >>> ASSERT_EFI_ERROR (Status);
> >>> return Status;
> >>> }
> >>> diff --git
> >>>
> >>
> a/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtPcieLibArm/SsdtPcieLibArm.
> >>> inf
> >>>
> >>
> b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtPcieLibArm/SsdtPcieLibArm.
> >>> inf
> >>> index 431e32a777..8e916f15e9 100644
> >>> ---
> >>>
> >>
> a/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtPcieLibArm/SsdtPcieLibArm.
> >>> inf
> >>> +++
> >> b/DynamicTablesPkg/Library/Acpi/Arm/AcpiSsdtPcieLibArm/SsdtPcieLib
> >>> +++ Arm.inf
> >>> @@ -30,6 +30,10 @@
> >>> AcpiHelperLib
> >>> AmlLib
> >>> BaseLib
> >>> + UefiBootServicesTableLib
> >>>
> >>> [Pcd]
> >>> gEdkiiDynamicTablesPkgTokenSpaceGuid.PcdPciUseSegmentAsUid
> >>> +
> >>> +[Protocols]
> >>> + gEdkiiDynamicTableSsdtPcieOverrideProtocolGuid
next prev parent reply other threads:[~2022-07-08 15:36 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-30 15:48 [PATCH 0/4] DynamicTablesPkg: Pcie generation updates Jeff Brasen
2022-06-30 15:48 ` [PATCH 1/4] DynamicTablesPkg: AcpiSsdtPcieLibArm: Correct translation value Jeff Brasen
2022-07-01 12:40 ` PierreGondois
2022-07-01 15:48 ` Jeff Brasen
2022-06-30 15:48 ` [PATCH 2/4] DynamicTablesPkg: AcpiSsdtPcieLibArm: Allow use of segment number as UID Jeff Brasen
2022-07-01 12:42 ` PierreGondois
2022-07-01 15:54 ` Jeff Brasen
2022-07-04 8:37 ` PierreGondois
2022-07-08 15:24 ` Jeff Brasen
2022-06-30 15:48 ` [PATCH 3/4] DynamicTablesPkg: AcpiSsdtPcieLibArm: Support UID > 0xF Jeff Brasen
2022-06-30 15:48 ` [PATCH 4/4] DynamicTablesPkg: AcpiSsdtPcieLibArm: Add support for override protocol Jeff Brasen
2022-07-01 12:39 ` PierreGondois
2022-07-01 15:52 ` Jeff Brasen
2022-07-04 8:47 ` PierreGondois
2022-07-08 15:36 ` Jeff Brasen [this message]
2022-07-11 15:01 ` PierreGondois
2022-07-11 15:32 ` Jeff Brasen
2022-07-11 17:14 ` PierreGondois
2022-07-11 17:56 ` Jeff Brasen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DS7PR12MB5789F3F0EDF19EE4983B25DDCB829@DS7PR12MB5789.namprd12.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox