public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Kinney, Michael D" <michael.d.kinney@intel.com>
To: "Zeng, Star" <star.zeng@intel.com>,
	"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>,
	"Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Dong, Eric" <eric.dong@intel.com>
Subject: Re: [Patch] MdeModulePkg/UsbMassStorageDxe: Fix USB Mass Storage detection
Date: Mon, 13 Nov 2017 17:03:06 +0000	[thread overview]
Message-ID: <E92EE9817A31E24EB0585FDF735412F5A7DBFC42@ORSMSX113.amr.corp.intel.com> (raw)
In-Reply-To: <0C09AFA07DD0434D9E2A0C6AEB0483103B9B4922@shsmsx102.ccr.corp.intel.com>

Star,

No.  I have not evaluated the PEI use case.

I will test that and provide an updated patch if
needed.

Thanks,

Mike

> -----Original Message-----
> From: Zeng, Star
> Sent: Monday, November 13, 2017 1:22 AM
> To: Kinney, Michael D <michael.d.kinney@intel.com>; edk2-
> devel@lists.01.org
> Cc: Dong, Eric <eric.dong@intel.com>; Zeng, Star
> <star.zeng@intel.com>
> Subject: RE: [Patch] MdeModulePkg/UsbMassStorageDxe: Fix
> USB Mass Storage detection
> 
> Mike,
> 
> Have you evaluated whether the code in
> PeiUsbRequestSense() of PeiAtapi.c also needs to be
> updated?
> 
> 
> Thanks,
> Star
> -----Original Message-----
> From: Kinney, Michael D
> Sent: Thursday, November 9, 2017 6:03 AM
> To: edk2-devel@lists.01.org
> Cc: Zeng, Star <star.zeng@intel.com>; Dong, Eric
> <eric.dong@intel.com>
> Subject: [Patch] MdeModulePkg/UsbMassStorageDxe: Fix USB
> Mass Storage detection
> 
> https://bugzilla.tianocore.org/show_bug.cgi?id=766
> 
> Update logic to not return an error from
> UsbBootRequestSense() if a Request Sense command responds
> with no sense information.
> It is legal for a USB mass storage device to respond to a
> Request Sense command with a SenseKey of
> USB_BOOT_SENSE_NO_SENSE and an Additional Sense Code of
> USB_BOOT_ASC_NO_ADDITIONAL_SENSE_INFORMATION.
> 
> This is described in Section 3.3 of the Universal Serial
> Bus Mass Storage Specification For Bootability:
> 
> http://www.usb.org/developers/docs/devclass_docs/usb_msc_
> boot_1.0.pdf
> 
> The previous logic returned an error of EFI_NO_RESPONSE
> and this caused USB mass storage devices such as a USB
> floppy drive to not be detected.
> 
> Cc: Star Zeng <star.zeng@intel.com>
> Cc: Eric Dong <eric.dong@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Michael D Kinney
> <michael.d.kinney@intel.com>
> ---
>  MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c |
> 11 +++++++++--
> MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h |  9
> +++++----
>  2 files changed, 14 insertions(+), 6 deletions(-)
> 
> diff --git
> a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
> b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
> index 0c46f888eb..2eb30f0c5f 100644
> ---
> a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
> +++
> b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.c
> @@ -2,7 +2,7 @@
>    Implementation of the command set of USB Mass Storage
> Specification
>    for Bootability, Revision 1.0.
> 
> -Copyright (c) 2007 - 2016, Intel Corporation. All rights
> reserved.<BR>
> +Copyright (c) 2007 - 2017, Intel Corporation. All rights
> reserved.<BR>
>  This program and the accompanying materials  are
> licensed and made available under the terms and
> conditions of the BSD License  which accompanies this
> distribution.  The full text of the license may be found
> at @@ -80,7 +80,14 @@ UsbBootRequestSense (
>    switch (USB_BOOT_SENSE_KEY (SenseData.SenseKey)) {
> 
>    case USB_BOOT_SENSE_NO_SENSE:
> -    Status = EFI_NO_RESPONSE;
> +    if (SenseData.Asc ==
> USB_BOOT_ASC_NO_ADDITIONAL_SENSE_INFORMATION) {
> +      //
> +      // It is not an error if a device does not have
> additional sense information
> +      //
> +      Status = EFI_SUCCESS;
> +    } else {
> +      Status = EFI_NO_RESPONSE;
> +    }
>      break;
> 
>    case USB_BOOT_SENSE_RECOVERED:
> diff --git
> a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h
> b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h
> index c4082558fa..13a926035c 100644
> ---
> a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h
> +++
> b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBoot.h
> @@ -2,7 +2,7 @@
>    Definition of the command set of USB Mass Storage
> Specification
>    for Bootability, Revision 1.0.
> 
> -Copyright (c) 2007 - 2012, Intel Corporation. All rights
> reserved.<BR>
> +Copyright (c) 2007 - 2017, Intel Corporation. All rights
> reserved.<BR>
>  This program and the accompanying materials  are
> licensed and made available under the terms and
> conditions of the BSD License  which accompanies this
> distribution.  The full text of the license may be found
> at @@ -51,9 +51,10 @@ WITHOUT WARRANTIES OR
> REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
>  #define USB_BOOT_SENSE_VOLUME_OVERFLOW  0x0D ///<
> Partition overflow
>  #define USB_BOOT_SENSE_MISCOMPARE       0x0E ///< Source
> data mis-match while verfying.
> 
> -#define USB_BOOT_ASC_NOT_READY          0x04
> -#define USB_BOOT_ASC_NO_MEDIA           0x3A
> -#define USB_BOOT_ASC_MEDIA_CHANGE       0x28
> +#define USB_BOOT_ASC_NO_ADDITIONAL_SENSE_INFORMATION
> 0x00
> +#define USB_BOOT_ASC_NOT_READY
> 0x04
> +#define USB_BOOT_ASC_NO_MEDIA
> 0x3A
> +#define USB_BOOT_ASC_MEDIA_CHANGE
> 0x28
> 
>  //
>  // Supported PDT codes, or Peripheral Device Type
> --
> 2.14.2.windows.3



  reply	other threads:[~2017-11-13 16:59 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-08 22:02 [Patch] MdeModulePkg/UsbMassStorageDxe: Fix USB Mass Storage detection Michael D Kinney
2017-11-13  9:22 ` Zeng, Star
2017-11-13 17:03   ` Kinney, Michael D [this message]
2017-11-13 19:53     ` Kinney, Michael D
2017-11-14  1:03       ` Zeng, Star

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E92EE9817A31E24EB0585FDF735412F5A7DBFC42@ORSMSX113.amr.corp.intel.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox