public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
* [Patch] MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN value
@ 2017-11-08 22:19 Michael D Kinney
  2017-11-13  9:44 ` Zeng, Star
  0 siblings, 1 reply; 6+ messages in thread
From: Michael D Kinney @ 2017-11-08 22:19 UTC (permalink / raw)
  To: edk2-devel; +Cc: Star Zeng, Eric Dong

The USB Mass Storage Class Specification states that a
maximum LUN value larger than 0x0F is invalid.  Add
a check to make sure this maximum LUN value is in this
valid range, and if it is not, then assume that the
device does not support multiple LUNs and return a
maximum LUN value of 0.

This change improves compatibility with USB FLASH drives
that have a single LUN, but return invalid maximum LUN
values.

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
---
 MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
index 4bb7222b89..c7436cf036 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
@@ -2,7 +2,7 @@
   Implementation of the USB mass storage Bulk-Only Transport protocol,
   according to USB Mass Storage Class Bulk-Only Transport, Revision 1.0.
 
-Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2017, Intel Corporation. All rights reserved.<BR>
 This program and the accompanying materials
 are licensed and made available under the terms and conditions of the BSD License
 which accompanies this distribution.  The full text of the license may be found at
@@ -576,6 +576,14 @@ UsbBotGetMaxLun (
                             1,
                             &Result
                             );
+  if (!EFI_ERROR (Status) && *MaxLun > USB_BOT_MAX_LUN) {
+    //
+    // If MaxLun is larger than the maximum LUN value (0x0f) supported by the
+    // USB Mass Storage Class Bulk-Only Transport Spec, then set MaxLun to 0
+    // which means no LUN is associated with the device.
+    //
+    *MaxLun = 0;
+  }
 
   return Status;
 }
-- 
2.14.2.windows.3



^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [Patch] MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN value
  2017-11-08 22:19 [Patch] MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN value Michael D Kinney
@ 2017-11-13  9:44 ` Zeng, Star
  2017-11-13 10:03   ` Zeng, Star
  0 siblings, 1 reply; 6+ messages in thread
From: Zeng, Star @ 2017-11-13  9:44 UTC (permalink / raw)
  To: Kinney, Michael D, edk2-devel@lists.01.org; +Cc: Dong, Eric, Zeng, Star

Reviewed-by: Star Zeng <star.zeng@intel.com>

How about also adding the compatibility info(now in commit log) to the code comments?
For example,

+    //
+    // If MaxLun is larger than the maximum LUN value (0x0f) supported by the
+    // USB Mass Storage Class Bulk-Only Transport Spec, then set MaxLun to 0
+    // which means no LUN is associated with the device.
+    // It improves compatibility with USB FLASH drives that have a single LUN,
+    // but return invalid maximum LUN values.
+    //

Thanks,
Star
-----Original Message-----
From: Kinney, Michael D 
Sent: Thursday, November 9, 2017 6:19 AM
To: edk2-devel@lists.01.org
Cc: Zeng, Star <star.zeng@intel.com>; Dong, Eric <eric.dong@intel.com>
Subject: [Patch] MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN value

The USB Mass Storage Class Specification states that a maximum LUN value larger than 0x0F is invalid.  Add a check to make sure this maximum LUN value is in this valid range, and if it is not, then assume that the device does not support multiple LUNs and return a maximum LUN value of 0.

This change improves compatibility with USB FLASH drives that have a single LUN, but return invalid maximum LUN values.

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
---
 MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
index 4bb7222b89..c7436cf036 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
@@ -2,7 +2,7 @@
   Implementation of the USB mass storage Bulk-Only Transport protocol,
   according to USB Mass Storage Class Bulk-Only Transport, Revision 1.0.
 
-Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2017, Intel Corporation. All rights reserved.<BR>
 This program and the accompanying materials  are licensed and made available under the terms and conditions of the BSD License  which accompanies this distribution.  The full text of the license may be found at @@ -576,6 +576,14 @@ UsbBotGetMaxLun (
                             1,
                             &Result
                             );
+  if (!EFI_ERROR (Status) && *MaxLun > USB_BOT_MAX_LUN) {
+    //
+    // If MaxLun is larger than the maximum LUN value (0x0f) supported by the
+    // USB Mass Storage Class Bulk-Only Transport Spec, then set MaxLun to 0
+    // which means no LUN is associated with the device.
+    //
+    *MaxLun = 0;
+  }
 
   return Status;
 }
--
2.14.2.windows.3



^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [Patch] MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN value
  2017-11-13  9:44 ` Zeng, Star
@ 2017-11-13 10:03   ` Zeng, Star
  2017-11-13 17:08     ` Kinney, Michael D
  0 siblings, 1 reply; 6+ messages in thread
From: Zeng, Star @ 2017-11-13 10:03 UTC (permalink / raw)
  To: Kinney, Michael D, edk2-devel@lists.01.org; +Cc: Dong, Eric, Zeng, Star

Mike,

Just curious about what is the value returned for MaxLun in the case you met before this patch?

Could *MaxLun  &= USB_BOT_MAX_LUN work?


Thanks,
Star
-----Original Message-----
From: Zeng, Star 
Sent: Monday, November 13, 2017 5:45 PM
To: Kinney, Michael D <michael.d.kinney@intel.com>; edk2-devel@lists.01.org
Cc: Dong, Eric <eric.dong@intel.com>; Zeng, Star <star.zeng@intel.com>
Subject: RE: [Patch] MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN value

Reviewed-by: Star Zeng <star.zeng@intel.com>

How about also adding the compatibility info(now in commit log) to the code comments?
For example,

+    //
+    // If MaxLun is larger than the maximum LUN value (0x0f) supported by the
+    // USB Mass Storage Class Bulk-Only Transport Spec, then set MaxLun to 0
+    // which means no LUN is associated with the device.
+    // It improves compatibility with USB FLASH drives that have a single LUN,
+    // but return invalid maximum LUN values.
+    //

Thanks,
Star
-----Original Message-----
From: Kinney, Michael D 
Sent: Thursday, November 9, 2017 6:19 AM
To: edk2-devel@lists.01.org
Cc: Zeng, Star <star.zeng@intel.com>; Dong, Eric <eric.dong@intel.com>
Subject: [Patch] MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN value

The USB Mass Storage Class Specification states that a maximum LUN value larger than 0x0F is invalid.  Add a check to make sure this maximum LUN value is in this valid range, and if it is not, then assume that the device does not support multiple LUNs and return a maximum LUN value of 0.

This change improves compatibility with USB FLASH drives that have a single LUN, but return invalid maximum LUN values.

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
---
 MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
index 4bb7222b89..c7436cf036 100644
--- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
+++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
@@ -2,7 +2,7 @@
   Implementation of the USB mass storage Bulk-Only Transport protocol,
   according to USB Mass Storage Class Bulk-Only Transport, Revision 1.0.
 
-Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2007 - 2017, Intel Corporation. All rights reserved.<BR>
 This program and the accompanying materials  are licensed and made available under the terms and conditions of the BSD License  which accompanies this distribution.  The full text of the license may be found at @@ -576,6 +576,14 @@ UsbBotGetMaxLun (
                             1,
                             &Result
                             );
+  if (!EFI_ERROR (Status) && *MaxLun > USB_BOT_MAX_LUN) {
+    //
+    // If MaxLun is larger than the maximum LUN value (0x0f) supported by the
+    // USB Mass Storage Class Bulk-Only Transport Spec, then set MaxLun to 0
+    // which means no LUN is associated with the device.
+    //
+    *MaxLun = 0;
+  }
 
   return Status;
 }
--
2.14.2.windows.3



^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [Patch] MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN value
  2017-11-13 10:03   ` Zeng, Star
@ 2017-11-13 17:08     ` Kinney, Michael D
  2017-11-14  0:47       ` Zeng, Star
  0 siblings, 1 reply; 6+ messages in thread
From: Kinney, Michael D @ 2017-11-13 17:08 UTC (permalink / raw)
  To: Zeng, Star, edk2-devel@lists.01.org, Kinney, Michael D
  Cc: Dong, Eric, Zeng, Star

Star,

I do not recall the exact value I saw.

However, the spec states that one byte is returned
with the max LUN value.  It does not state that
the byte is composed of bitfields with the lower
bits being the max LUN, so I prefer the value
check instead if the and mask.

Thanks,

Mike
 

> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org]
> On Behalf Of Zeng, Star
> Sent: Monday, November 13, 2017 2:03 AM
> To: Kinney, Michael D <michael.d.kinney@intel.com>; edk2-
> devel@lists.01.org
> Cc: Dong, Eric <eric.dong@intel.com>; Zeng, Star
> <star.zeng@intel.com>
> Subject: Re: [edk2] [Patch]
> MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN value
> 
> Mike,
> 
> Just curious about what is the value returned for MaxLun
> in the case you met before this patch?
> 
> Could *MaxLun  &= USB_BOT_MAX_LUN work?
> 
> 
> Thanks,
> Star
> -----Original Message-----
> From: Zeng, Star
> Sent: Monday, November 13, 2017 5:45 PM
> To: Kinney, Michael D <michael.d.kinney@intel.com>; edk2-
> devel@lists.01.org
> Cc: Dong, Eric <eric.dong@intel.com>; Zeng, Star
> <star.zeng@intel.com>
> Subject: RE: [Patch] MdeModulePkg/UsbMassStorageDxe:
> Verify Get Max LUN value
> 
> Reviewed-by: Star Zeng <star.zeng@intel.com>
> 
> How about also adding the compatibility info(now in
> commit log) to the code comments?
> For example,
> 
> +    //
> +    // If MaxLun is larger than the maximum LUN value
> (0x0f) supported by the
> +    // USB Mass Storage Class Bulk-Only Transport Spec,
> then set MaxLun to 0
> +    // which means no LUN is associated with the device.
> +    // It improves compatibility with USB FLASH drives
> that have a single LUN,
> +    // but return invalid maximum LUN values.
> +    //
> 
> Thanks,
> Star
> -----Original Message-----
> From: Kinney, Michael D
> Sent: Thursday, November 9, 2017 6:19 AM
> To: edk2-devel@lists.01.org
> Cc: Zeng, Star <star.zeng@intel.com>; Dong, Eric
> <eric.dong@intel.com>
> Subject: [Patch] MdeModulePkg/UsbMassStorageDxe: Verify
> Get Max LUN value
> 
> The USB Mass Storage Class Specification states that a
> maximum LUN value larger than 0x0F is invalid.  Add a
> check to make sure this maximum LUN value is in this
> valid range, and if it is not, then assume that the
> device does not support multiple LUNs and return a
> maximum LUN value of 0.
> 
> This change improves compatibility with USB FLASH drives
> that have a single LUN, but return invalid maximum LUN
> values.
> 
> Cc: Star Zeng <star.zeng@intel.com>
> Cc: Eric Dong <eric.dong@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Michael D Kinney
> <michael.d.kinney@intel.com>
> ---
>  MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c | 10
> +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git
> a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
> b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
> index 4bb7222b89..c7436cf036 100644
> --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
> +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
> @@ -2,7 +2,7 @@
>    Implementation of the USB mass storage Bulk-Only
> Transport protocol,
>    according to USB Mass Storage Class Bulk-Only
> Transport, Revision 1.0.
> 
> -Copyright (c) 2007 - 2011, Intel Corporation. All rights
> reserved.<BR>
> +Copyright (c) 2007 - 2017, Intel Corporation. All rights
> reserved.<BR>
>  This program and the accompanying materials  are
> licensed and made available under the terms and
> conditions of the BSD License  which accompanies this
> distribution.  The full text of the license may be found
> at @@ -576,6 +576,14 @@ UsbBotGetMaxLun (
>                              1,
>                              &Result
>                              );
> +  if (!EFI_ERROR (Status) && *MaxLun > USB_BOT_MAX_LUN)
> {
> +    //
> +    // If MaxLun is larger than the maximum LUN value
> (0x0f) supported by the
> +    // USB Mass Storage Class Bulk-Only Transport Spec,
> then set MaxLun to 0
> +    // which means no LUN is associated with the device.
> +    //
> +    *MaxLun = 0;
> +  }
> 
>    return Status;
>  }
> --
> 2.14.2.windows.3
> 
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [Patch] MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN value
  2017-11-13 17:08     ` Kinney, Michael D
@ 2017-11-14  0:47       ` Zeng, Star
  2017-11-14  1:13         ` Kinney, Michael D
  0 siblings, 1 reply; 6+ messages in thread
From: Zeng, Star @ 2017-11-14  0:47 UTC (permalink / raw)
  To: Kinney, Michael D, edk2-devel@lists.01.org; +Cc: Dong, Eric, Zeng, Star

That is fine.

Reviewed-by: Star Zeng <star.zeng@intel.com>

Thanks,
Star
-----Original Message-----
From: Kinney, Michael D 
Sent: Tuesday, November 14, 2017 1:08 AM
To: Zeng, Star <star.zeng@intel.com>; edk2-devel@lists.01.org; Kinney, Michael D <michael.d.kinney@intel.com>
Cc: Dong, Eric <eric.dong@intel.com>; Zeng, Star <star.zeng@intel.com>
Subject: RE: [Patch] MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN value

Star,

I do not recall the exact value I saw.

However, the spec states that one byte is returned with the max LUN value.  It does not state that the byte is composed of bitfields with the lower bits being the max LUN, so I prefer the value check instead if the and mask.

Thanks,

Mike
 

> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org]
> On Behalf Of Zeng, Star
> Sent: Monday, November 13, 2017 2:03 AM
> To: Kinney, Michael D <michael.d.kinney@intel.com>; edk2- 
> devel@lists.01.org
> Cc: Dong, Eric <eric.dong@intel.com>; Zeng, Star <star.zeng@intel.com>
> Subject: Re: [edk2] [Patch]
> MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN value
> 
> Mike,
> 
> Just curious about what is the value returned for MaxLun in the case 
> you met before this patch?
> 
> Could *MaxLun  &= USB_BOT_MAX_LUN work?
> 
> 
> Thanks,
> Star
> -----Original Message-----
> From: Zeng, Star
> Sent: Monday, November 13, 2017 5:45 PM
> To: Kinney, Michael D <michael.d.kinney@intel.com>; edk2- 
> devel@lists.01.org
> Cc: Dong, Eric <eric.dong@intel.com>; Zeng, Star <star.zeng@intel.com>
> Subject: RE: [Patch] MdeModulePkg/UsbMassStorageDxe:
> Verify Get Max LUN value
> 
> Reviewed-by: Star Zeng <star.zeng@intel.com>
> 
> How about also adding the compatibility info(now in commit log) to the 
> code comments?
> For example,
> 
> +    //
> +    // If MaxLun is larger than the maximum LUN value
> (0x0f) supported by the
> +    // USB Mass Storage Class Bulk-Only Transport Spec,
> then set MaxLun to 0
> +    // which means no LUN is associated with the device.
> +    // It improves compatibility with USB FLASH drives
> that have a single LUN,
> +    // but return invalid maximum LUN values.
> +    //
> 
> Thanks,
> Star
> -----Original Message-----
> From: Kinney, Michael D
> Sent: Thursday, November 9, 2017 6:19 AM
> To: edk2-devel@lists.01.org
> Cc: Zeng, Star <star.zeng@intel.com>; Dong, Eric <eric.dong@intel.com>
> Subject: [Patch] MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN 
> value
> 
> The USB Mass Storage Class Specification states that a maximum LUN 
> value larger than 0x0F is invalid.  Add a check to make sure this 
> maximum LUN value is in this valid range, and if it is not, then 
> assume that the device does not support multiple LUNs and return a 
> maximum LUN value of 0.
> 
> This change improves compatibility with USB FLASH drives that have a 
> single LUN, but return invalid maximum LUN values.
> 
> Cc: Star Zeng <star.zeng@intel.com>
> Cc: Eric Dong <eric.dong@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Michael D Kinney
> <michael.d.kinney@intel.com>
> ---
>  MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c | 10
> +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git
> a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
> b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
> index 4bb7222b89..c7436cf036 100644
> --- a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
> +++ b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
> @@ -2,7 +2,7 @@
>    Implementation of the USB mass storage Bulk-Only Transport 
> protocol,
>    according to USB Mass Storage Class Bulk-Only Transport, Revision 
> 1.0.
> 
> -Copyright (c) 2007 - 2011, Intel Corporation. All rights 
> reserved.<BR>
> +Copyright (c) 2007 - 2017, Intel Corporation. All rights
> reserved.<BR>
>  This program and the accompanying materials  are licensed and made 
> available under the terms and conditions of the BSD License  which 
> accompanies this distribution.  The full text of the license may be 
> found at @@ -576,6 +576,14 @@ UsbBotGetMaxLun (
>                              1,
>                              &Result
>                              );
> +  if (!EFI_ERROR (Status) && *MaxLun > USB_BOT_MAX_LUN)
> {
> +    //
> +    // If MaxLun is larger than the maximum LUN value
> (0x0f) supported by the
> +    // USB Mass Storage Class Bulk-Only Transport Spec,
> then set MaxLun to 0
> +    // which means no LUN is associated with the device.
> +    //
> +    *MaxLun = 0;
> +  }
> 
>    return Status;
>  }
> --
> 2.14.2.windows.3
> 
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [Patch] MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN value
  2017-11-14  0:47       ` Zeng, Star
@ 2017-11-14  1:13         ` Kinney, Michael D
  0 siblings, 0 replies; 6+ messages in thread
From: Kinney, Michael D @ 2017-11-14  1:13 UTC (permalink / raw)
  To: Zeng, Star, edk2-devel@lists.01.org, Kinney, Michael D; +Cc: Dong, Eric

Star,

I may drop this patch.  The range check is valid, but 
may want to change to an error condition instead of 
forcing to 0 if out of range.

I just found that this device is returning different
values for the max LUN.  I saw examples today of a
single LUN device returning 4.  This appears to be due to 
the request for max LUN returning a buffer with 0
DataLength, and the 1 byte data buffer is being returned
with random data.

I believe the root cause is a USB Control Transfer
with Direction of EfiUsbDataIn and the length of 
data written is less than the amount of data requested.

In this case 1 byte is requested, and 0 bytes are written.

The USB I/O Protocol ControlTransfer() API has a DataLength
parameter as an IN, but there is no method to know how 
much data was written.  The USB HC Protocol ControlTransfer()
API has DataLength as an IN/OUT, so the amount of data 
written is known at the HC level.

I am thinking the USB HC ControlTransfer() API needs to
return an error if the amount of data written is less than
requested.

I will work on a new patch with this approach.

Best regards,

Mike

> -----Original Message-----
> From: Zeng, Star
> Sent: Monday, November 13, 2017 4:48 PM
> To: Kinney, Michael D <michael.d.kinney@intel.com>; edk2-
> devel@lists.01.org
> Cc: Dong, Eric <eric.dong@intel.com>; Zeng, Star
> <star.zeng@intel.com>
> Subject: RE: [Patch] MdeModulePkg/UsbMassStorageDxe:
> Verify Get Max LUN value
> 
> That is fine.
> 
> Reviewed-by: Star Zeng <star.zeng@intel.com>
> 
> Thanks,
> Star
> -----Original Message-----
> From: Kinney, Michael D
> Sent: Tuesday, November 14, 2017 1:08 AM
> To: Zeng, Star <star.zeng@intel.com>; edk2-
> devel@lists.01.org; Kinney, Michael D
> <michael.d.kinney@intel.com>
> Cc: Dong, Eric <eric.dong@intel.com>; Zeng, Star
> <star.zeng@intel.com>
> Subject: RE: [Patch] MdeModulePkg/UsbMassStorageDxe:
> Verify Get Max LUN value
> 
> Star,
> 
> I do not recall the exact value I saw.
> 
> However, the spec states that one byte is returned with
> the max LUN value.  It does not state that the byte is
> composed of bitfields with the lower bits being the max
> LUN, so I prefer the value check instead if the and mask.
> 
> Thanks,
> 
> Mike
> 
> 
> > -----Original Message-----
> > From: edk2-devel [mailto:edk2-devel-
> bounces@lists.01.org]
> > On Behalf Of Zeng, Star
> > Sent: Monday, November 13, 2017 2:03 AM
> > To: Kinney, Michael D <michael.d.kinney@intel.com>;
> edk2-
> > devel@lists.01.org
> > Cc: Dong, Eric <eric.dong@intel.com>; Zeng, Star
> <star.zeng@intel.com>
> > Subject: Re: [edk2] [Patch]
> > MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN
> value
> >
> > Mike,
> >
> > Just curious about what is the value returned for
> MaxLun in the case
> > you met before this patch?
> >
> > Could *MaxLun  &= USB_BOT_MAX_LUN work?
> >
> >
> > Thanks,
> > Star
> > -----Original Message-----
> > From: Zeng, Star
> > Sent: Monday, November 13, 2017 5:45 PM
> > To: Kinney, Michael D <michael.d.kinney@intel.com>;
> edk2-
> > devel@lists.01.org
> > Cc: Dong, Eric <eric.dong@intel.com>; Zeng, Star
> <star.zeng@intel.com>
> > Subject: RE: [Patch] MdeModulePkg/UsbMassStorageDxe:
> > Verify Get Max LUN value
> >
> > Reviewed-by: Star Zeng <star.zeng@intel.com>
> >
> > How about also adding the compatibility info(now in
> commit log) to the
> > code comments?
> > For example,
> >
> > +    //
> > +    // If MaxLun is larger than the maximum LUN value
> > (0x0f) supported by the
> > +    // USB Mass Storage Class Bulk-Only Transport
> Spec,
> > then set MaxLun to 0
> > +    // which means no LUN is associated with the
> device.
> > +    // It improves compatibility with USB FLASH drives
> > that have a single LUN,
> > +    // but return invalid maximum LUN values.
> > +    //
> >
> > Thanks,
> > Star
> > -----Original Message-----
> > From: Kinney, Michael D
> > Sent: Thursday, November 9, 2017 6:19 AM
> > To: edk2-devel@lists.01.org
> > Cc: Zeng, Star <star.zeng@intel.com>; Dong, Eric
> <eric.dong@intel.com>
> > Subject: [Patch] MdeModulePkg/UsbMassStorageDxe: Verify
> Get Max LUN
> > value
> >
> > The USB Mass Storage Class Specification states that a
> maximum LUN
> > value larger than 0x0F is invalid.  Add a check to make
> sure this
> > maximum LUN value is in this valid range, and if it is
> not, then
> > assume that the device does not support multiple LUNs
> and return a
> > maximum LUN value of 0.
> >
> > This change improves compatibility with USB FLASH
> drives that have a
> > single LUN, but return invalid maximum LUN values.
> >
> > Cc: Star Zeng <star.zeng@intel.com>
> > Cc: Eric Dong <eric.dong@intel.com>
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Michael D Kinney
> > <michael.d.kinney@intel.com>
> > ---
> >  MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c |
> 10
> > +++++++++-
> >  1 file changed, 9 insertions(+), 1 deletion(-)
> >
> > diff --git
> > a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
> > b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
> > index 4bb7222b89..c7436cf036 100644
> > ---
> a/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
> > +++
> b/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.c
> > @@ -2,7 +2,7 @@
> >    Implementation of the USB mass storage Bulk-Only
> Transport
> > protocol,
> >    according to USB Mass Storage Class Bulk-Only
> Transport, Revision
> > 1.0.
> >
> > -Copyright (c) 2007 - 2011, Intel Corporation. All
> rights
> > reserved.<BR>
> > +Copyright (c) 2007 - 2017, Intel Corporation. All
> rights
> > reserved.<BR>
> >  This program and the accompanying materials  are
> licensed and made
> > available under the terms and conditions of the BSD
> License  which
> > accompanies this distribution.  The full text of the
> license may be
> > found at @@ -576,6 +576,14 @@ UsbBotGetMaxLun (
> >                              1,
> >                              &Result
> >                              );
> > +  if (!EFI_ERROR (Status) && *MaxLun >
> USB_BOT_MAX_LUN)
> > {
> > +    //
> > +    // If MaxLun is larger than the maximum LUN value
> > (0x0f) supported by the
> > +    // USB Mass Storage Class Bulk-Only Transport
> Spec,
> > then set MaxLun to 0
> > +    // which means no LUN is associated with the
> device.
> > +    //
> > +    *MaxLun = 0;
> > +  }
> >
> >    return Status;
> >  }
> > --
> > 2.14.2.windows.3
> >
> > _______________________________________________
> > edk2-devel mailing list
> > edk2-devel@lists.01.org
> > https://lists.01.org/mailman/listinfo/edk2-devel


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2017-11-14  1:09 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-11-08 22:19 [Patch] MdeModulePkg/UsbMassStorageDxe: Verify Get Max LUN value Michael D Kinney
2017-11-13  9:44 ` Zeng, Star
2017-11-13 10:03   ` Zeng, Star
2017-11-13 17:08     ` Kinney, Michael D
2017-11-14  0:47       ` Zeng, Star
2017-11-14  1:13         ` Kinney, Michael D

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox