From: "Dong, Eric" <eric.dong@intel.com>
To: "Ni, Ruiyu" <ruiyu.ni@intel.com>,
Laszlo Ersek <lersek@redhat.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: Crystal Lee <CrystalLee@ami.com.tw>
Subject: Re: [Patch] UefiCpuPkg/MpInitLib: Avoid call PcdGe* in Ap & Bsp.
Date: Fri, 20 Oct 2017 02:42:31 +0000 [thread overview]
Message-ID: <ED077930C258884BBCB450DB737E66224AA3BD9E@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <734D49CCEBEEF84792F5B80ED585239D5BA9EC0A@SHSMSX104.ccr.corp.intel.com>
Hi Laszlo & Ruiyu,
I have fix the typo and push the change. Thanks.
Thanks,
Eric
> -----Original Message-----
> From: Ni, Ruiyu
> Sent: Thursday, October 19, 2017 5:23 PM
> To: Laszlo Ersek <lersek@redhat.com>; Dong, Eric <eric.dong@intel.com>;
> edk2-devel@lists.01.org
> Cc: Crystal Lee <CrystalLee@ami.com.tw>
> Subject: RE: [edk2] [Patch] UefiCpuPkg/MpInitLib: Avoid call PcdGe* in Ap &
> Bsp.
>
> With the subject change suggested by Laszlo, Reviewed-by: Ruiyu Ni
> <Ruiyu.ni@Intel.com>
>
> Thanks/Ray
>
> > -----Original Message-----
> > From: Laszlo Ersek [mailto:lersek@redhat.com]
> > Sent: Thursday, October 19, 2017 4:08 PM
> > To: Dong, Eric <eric.dong@intel.com>; edk2-devel@lists.01.org
> > Cc: Ni, Ruiyu <ruiyu.ni@intel.com>; Crystal Lee
> > <CrystalLee@ami.com.tw>
> > Subject: Re: [edk2] [Patch] UefiCpuPkg/MpInitLib: Avoid call PcdGe* in
> > Ap & Bsp.
> >
> > On 10/19/17 04:42, Eric Dong wrote:
> > > MicrocodeDetect function will run by every threads, and it will use
> > > PcdGet to get PcdCpuMicrocodePatchAddress and
> > > PcdCpuMicrocodePatchRegionSize, if change both PCD default to
> > > dynamic, system will in non-deterministic behavior.
> > >
> > > By design, UEFI/PI services are single threaded and not re-entrant
> > > so Multi processor code should not use UEFI/PI services. Here, Pcd
> > > protocol/PPI is used to access dynamic PCDs so it would result in
> > > non-deterministic behavior.
> > >
> > > This code get PCD value in BSP and save them in CPU_MP_DATA for Ap.
> > >
> > > https://bugzilla.tianocore.org/show_bug.cgi?id=726
> > >
> > > Cc: Crystal Lee <CrystalLee@ami.com.tw>
> > > Cc: Ruiyu Ni <ruiyu.ni@intel.com>
> > > Contributed-under: TianoCore Contribution Agreement 1.1
> > > Signed-off-by: Eric Dong <eric.dong@intel.com>
> > > ---
> > > UefiCpuPkg/Library/MpInitLib/Microcode.c | 10 +++-------
> > > UefiCpuPkg/Library/MpInitLib/MpLib.c | 2 ++
> > > UefiCpuPkg/Library/MpInitLib/MpLib.h | 2 ++
> > > 3 files changed, 7 insertions(+), 7 deletions(-)
> >
> > Eric, can you please fix up the subject line after you get an R-b and
> > are about to push the patch?
> >
> > -UefiCpuPkg/MpInitLib: Avoid call PcdGe* in Ap & Bsp.
> > +UefiCpuPkg/MpInitLib: Avoid call PcdGet* in Ap & Bsp.
> >
> > Thanks!
> > Laszlo
> >
> >
> > > diff --git a/UefiCpuPkg/Library/MpInitLib/Microcode.c
> > > b/UefiCpuPkg/Library/MpInitLib/Microcode.c
> > > index 982995b..35f66f7 100644
> > > --- a/UefiCpuPkg/Library/MpInitLib/Microcode.c
> > > +++ b/UefiCpuPkg/Library/MpInitLib/Microcode.c
> > > @@ -42,8 +42,6 @@ MicrocodeDetect (
> > > IN CPU_MP_DATA *CpuMpData
> > > )
> > > {
> > > - UINT64 MicrocodePatchAddress;
> > > - UINT64 MicrocodePatchRegionSize;
> > > UINT32 ExtendedTableLength;
> > > UINT32 ExtendedTableCount;
> > > CPU_MICROCODE_EXTENDED_TABLE *ExtendedTable;
> > > @@ -61,9 +59,7 @@ MicrocodeDetect (
> > > VOID *MicrocodeData;
> > > MSR_IA32_PLATFORM_ID_REGISTER PlatformIdMsr;
> > >
> > > - MicrocodePatchAddress = PcdGet64
> (PcdCpuMicrocodePatchAddress);
> > > - MicrocodePatchRegionSize = PcdGet64
> > > (PcdCpuMicrocodePatchRegionSize);
> > > - if (MicrocodePatchRegionSize == 0) {
> > > + if (CpuMpData->MicrocodePatchRegionSize == 0) {
> > > //
> > > // There is no microcode patches
> > > //
> > > @@ -93,8 +89,8 @@ MicrocodeDetect (
> > >
> > > LatestRevision = 0;
> > > MicrocodeData = NULL;
> > > - MicrocodeEnd = (UINTN) (MicrocodePatchAddress +
> > > MicrocodePatchRegionSize);
> > > - MicrocodeEntryPoint = (CPU_MICROCODE_HEADER *) (UINTN)
> > > MicrocodePatchAddress;
> > > + MicrocodeEnd = (UINTN) (CpuMpData->MicrocodePatchAddress +
> > > + CpuMpData->MicrocodePatchRegionSize);
> > > + MicrocodeEntryPoint = (CPU_MICROCODE_HEADER *) (UINTN)
> > > + CpuMpData->MicrocodePatchAddress;
> > > do {
> > > //
> > > // Check if the microcode is for the Cpu and the version is
> > > newer diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c
> > > b/UefiCpuPkg/Library/MpInitLib/MpLib.c
> > > index 924b909..f3ee6d4 100644
> > > --- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
> > > +++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
> > > @@ -1458,6 +1458,8 @@ MpInitLibInitialize (
> > > CpuMpData->SwitchBspFlag = FALSE;
> > > CpuMpData->CpuData = (CPU_AP_DATA *) (CpuMpData + 1);
> > > CpuMpData->CpuInfoInHob = (UINT64) (UINTN) (CpuMpData-
> > >CpuData + MaxLogicalProcessorNumber);
> > > + CpuMpData->MicrocodePatchAddress = PcdGet64
> > (PcdCpuMicrocodePatchAddress);
> > > + CpuMpData->MicrocodePatchRegionSize = PcdGet64
> > > + (PcdCpuMicrocodePatchRegionSize);
> > > InitializeSpinLock(&CpuMpData->MpLock);
> > > //
> > > // Save BSP's Control registers to APs diff --git
> > > a/UefiCpuPkg/Library/MpInitLib/MpLib.h
> > > b/UefiCpuPkg/Library/MpInitLib/MpLib.h
> > > index 19defda..84ae24f 100644
> > > --- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
> > > +++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
> > > @@ -233,6 +233,8 @@ struct _CPU_MP_DATA {
> > > UINT8 Vector;
> > > BOOLEAN PeriodicMode;
> > > BOOLEAN TimerInterruptState;
> > > + UINT64 MicrocodePatchAddress;
> > > + UINT64 MicrocodePatchRegionSize;
> > > };
> > >
> > > extern EFI_GUID mCpuInitMpLibHobGuid;
> > >
prev parent reply other threads:[~2017-10-20 2:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-19 2:42 [Patch] UefiCpuPkg/MpInitLib: Avoid call PcdGe* in Ap & Bsp Eric Dong
2017-10-19 8:08 ` Laszlo Ersek
2017-10-19 9:22 ` Ni, Ruiyu
2017-10-20 2:42 ` Dong, Eric [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ED077930C258884BBCB450DB737E66224AA3BD9E@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox