From: "Dong, Eric" <eric.dong@intel.com>
To: "Chen, Chen A" <chen.a.chen@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: Laszlo Ersek <lersek@redhat.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>
Subject: Re: [PATCH 36/37] UefiCpuPkg: Removing ipf which is no longer supported from edk2.
Date: Wed, 13 Jun 2018 08:51:01 +0000 [thread overview]
Message-ID: <ED077930C258884BBCB450DB737E66224AC17CFE@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <20180613034616.11780-1-chen.a.chen@intel.com>
Hi Chen,
For SecPeiDxeTimerLibUefiCpu.inf file, please change [Sources.Ia32, Sources.X64] to [Sources] because after remove IPF, these info is not needed. Also change others similar parts in this file.
With above changes, Reviewed-by: Eric Dong <eric.dong@intel.com>
-----Original Message-----
From: Chen, Chen A
Sent: Wednesday, June 13, 2018 11:46 AM
To: edk2-devel@lists.01.org
Cc: Chen, Chen A <chen.a.chen@intel.com>; Dong, Eric <eric.dong@intel.com>; Laszlo Ersek <lersek@redhat.com>; Kinney, Michael D <michael.d.kinney@intel.com>
Subject: [PATCH 36/37] UefiCpuPkg: Removing ipf which is no longer supported from edk2.
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: chenc2 <chen.a.chen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
---
UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf | 2 +-
UefiCpuPkg/CpuIoPei/CpuIoPei.inf | 2 +-
.../Library/SecPeiDxeTimerLibUefiCpu/IpfTimerLib.c | 216 ---------------------
.../SecPeiDxeTimerLibUefiCpu.inf | 10 +-
UefiCpuPkg/SecCore/SecCore.inf | 2 +-
UefiCpuPkg/UefiCpuPkg.dsc | 5 +-
6 files changed, 5 insertions(+), 232 deletions(-) delete mode 100644 UefiCpuPkg/Library/SecPeiDxeTimerLibUefiCpu/IpfTimerLib.c
diff --git a/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf b/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
index 55036622ca..28dce937b0 100644
--- a/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
+++ b/UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
@@ -26,7 +26,7 @@
#
# The following information is for reference only and not required by the build tools.
#
-# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+# VALID_ARCHITECTURES = IA32 X64 EBC
#
[Sources]
diff --git a/UefiCpuPkg/CpuIoPei/CpuIoPei.inf b/UefiCpuPkg/CpuIoPei/CpuIoPei.inf
index b72ad6bfaf..724999d7cd 100644
--- a/UefiCpuPkg/CpuIoPei/CpuIoPei.inf
+++ b/UefiCpuPkg/CpuIoPei/CpuIoPei.inf
@@ -24,7 +24,7 @@
#
# The following information is for reference only and not required by the build tools.
#
-# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+# VALID_ARCHITECTURES = IA32 X64 EBC
#
[Sources]
diff --git a/UefiCpuPkg/Library/SecPeiDxeTimerLibUefiCpu/IpfTimerLib.c b/UefiCpuPkg/Library/SecPeiDxeTimerLibUefiCpu/IpfTimerLib.c
deleted file mode 100644
index 714b99eec4..0000000000
--- a/UefiCpuPkg/Library/SecPeiDxeTimerLibUefiCpu/IpfTimerLib.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/** @file
- Timer Library functions built upon ITC on IPF.
-
- Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include <Base.h>
-#include <Library/TimerLib.h>
-#include <Library/BaseLib.h>
-#include <Library/PalLib.h>
-
-
-/**
- Performs a delay measured as number of ticks.
-
- An internal function to perform a delay measured as number of ticks. It's
- invoked by MicroSecondDelay() and NanoSecondDelay().
-
- @param Delay The number of ticks to delay.
-
-**/
-VOID
-EFIAPI
-InternalIpfDelay (
- IN INT64 Delay
- )
-{
- INT64 Ticks;
-
- //
- // The target timer count is calculated here
- //
- Ticks = (INT64)AsmReadItc () + Delay;
-
- //
- // Wait until time out
- // Delay > 2^63 could not be handled by this function
- // Timer wrap-arounds are handled correctly by this function
- //
- while (Ticks - (INT64)AsmReadItc() >= 0); -}
-
-/**
- Stalls the CPU for at least the given number of microseconds.
-
- Stalls the CPU for the number of microseconds specified by MicroSeconds.
-
- @param MicroSeconds The minimum number of microseconds to delay.
-
- @return The value of MicroSeconds inputted.
-
-**/
-UINTN
-EFIAPI
-MicroSecondDelay (
- IN UINTN MicroSeconds
- )
-{
- InternalIpfDelay (
- GetPerformanceCounterProperties (NULL, NULL) *
- MicroSeconds /
- 1000000
- );
- return MicroSeconds;
-}
-
-/**
- Stalls the CPU for at least the given number of nanoseconds.
-
- Stalls the CPU for the number of nanoseconds specified by NanoSeconds.
-
- @param NanoSeconds The minimum number of nanoseconds to delay.
-
- @return The value of NanoSeconds inputted.
-
-**/
-UINTN
-EFIAPI
-NanoSecondDelay (
- IN UINTN NanoSeconds
- )
-{
- InternalIpfDelay (
- GetPerformanceCounterProperties (NULL, NULL) *
- NanoSeconds /
- 1000000000
- );
- return NanoSeconds;
-}
-
-/**
- Retrieves the current value of a 64-bit free running performance counter.
-
- The counter can either count up by 1 or count down by 1. If the physical
- performance counter counts by a larger increment, then the counter values
- must be translated. The properties of the counter can be retrieved from
- GetPerformanceCounterProperties().
-
- @return The current value of the free running performance counter.
-
-**/
-UINT64
-EFIAPI
-GetPerformanceCounter (
- VOID
- )
-{
- return AsmReadItc ();
-}
-
-/**
- Retrieves the 64-bit frequency in Hz and the range of performance counter
- values.
-
- If StartValue is not NULL, then the value that the performance counter starts
- with immediately after is it rolls over is returned in StartValue. If
- EndValue is not NULL, then the value that the performance counter end with
- immediately before it rolls over is returned in EndValue. The 64-bit
- frequency of the performance counter in Hz is always returned. If StartValue
- is less than EndValue, then the performance counter counts up. If StartValue
- is greater than EndValue, then the performance counter counts down. For
- example, a 64-bit free running counter that counts up would have a StartValue
- of 0 and an EndValue of 0xFFFFFFFFFFFFFFFF. A 24-bit free running counter
- that counts down would have a StartValue of 0xFFFFFF and an EndValue of 0.
-
- @param StartValue The value the performance counter starts with when it
- rolls over.
- @param EndValue The value that the performance counter ends with before
- it rolls over.
-
- @return The frequency in Hz.
-
-**/
-UINT64
-EFIAPI
-GetPerformanceCounterProperties (
- OUT UINT64 *StartValue, OPTIONAL
- OUT UINT64 *EndValue OPTIONAL
- )
-{
- PAL_CALL_RETURN PalRet;
- UINT64 BaseFrequence;
-
- if (StartValue != NULL) {
- *StartValue = 0;
- }
-
- if (EndValue != NULL) {
- *EndValue = (UINT64)(-1);
- }
-
- PalRet = PalCall (PAL_FREQ_BASE, 0, 0, 0);
- if (PalRet.Status != 0) {
- return 1000000;
- }
- BaseFrequence = PalRet.r9;
-
- PalRet = PalCall (PAL_FREQ_RATIOS, 0, 0, 0);
- if (PalRet.Status != 0) {
- return 1000000;
- }
-
- return BaseFrequence * (PalRet.r11 >> 32) / (UINT32)PalRet.r11; -}
-
-/**
- Converts elapsed ticks of performance counter to time in nanoseconds.
-
- This function converts the elapsed ticks of running performance counter to
- time value in unit of nanoseconds.
-
- @param Ticks The number of elapsed ticks of running performance counter.
-
- @return The elapsed time in nanoseconds.
-
-**/
-UINT64
-EFIAPI
-GetTimeInNanoSecond (
- IN UINT64 Ticks
- )
-{
- UINT64 Frequency;
- UINT64 NanoSeconds;
- UINT64 Remainder;
- INTN Shift;
-
- Frequency = GetPerformanceCounterProperties (NULL, NULL);
-
- //
- // Ticks
- // Time = --------- x 1,000,000,000
- // Frequency
- //
- NanoSeconds = MultU64x32 (DivU64x64Remainder (Ticks, Frequency, &Remainder), 1000000000u);
-
- //
- // Ensure (Remainder * 1,000,000,000) will not overflow 64-bit.
- // Since 2^29 < 1,000,000,000 = 0x3B9ACA00 < 2^30, Remainder should < 2^(64-30) = 2^34,
- // i.e. highest bit set in Remainder should <= 33.
- //
- Shift = MAX (0, HighBitSet64 (Remainder) - 33);
- Remainder = RShiftU64 (Remainder, (UINTN) Shift);
- Frequency = RShiftU64 (Frequency, (UINTN) Shift);
- NanoSeconds += DivU64x64Remainder (MultU64x32 (Remainder, 1000000000u), Frequency, NULL);
-
- return NanoSeconds;
-}
diff --git a/UefiCpuPkg/Library/SecPeiDxeTimerLibUefiCpu/SecPeiDxeTimerLibUefiCpu.inf b/UefiCpuPkg/Library/SecPeiDxeTimerLibUefiCpu/SecPeiDxeTimerLibUefiCpu.inf
index a25e94a61a..e520e1cb78 100644
--- a/UefiCpuPkg/Library/SecPeiDxeTimerLibUefiCpu/SecPeiDxeTimerLibUefiCpu.inf
+++ b/UefiCpuPkg/Library/SecPeiDxeTimerLibUefiCpu/SecPeiDxeTimerLibUefiC
+++ pu.inf
@@ -36,16 +36,12 @@
#
-# VALID_ARCHITECTURES = IA32 X64 IPF
+# VALID_ARCHITECTURES = IA32 X64
#
[Sources.Ia32, Sources.X64]
X86TimerLib.c
-[Sources.IPF]
- IpfTimerLib.c
-
-
[Packages]
MdePkg/MdePkg.dec
UefiCpuPkg/UefiCpuPkg.dec
@@ -58,10 +54,6 @@
DebugLib
LocalApicLib
-[LibraryClasses.IPF]
- PalLib
-
-
[Pcd.IA32, Pcd.X64]
gEfiMdePkgTokenSpaceGuid.PcdFSBClock ## SOMETIMES_CONSUMES
diff --git a/UefiCpuPkg/SecCore/SecCore.inf b/UefiCpuPkg/SecCore/SecCore.inf index a8f8a6da27..3805fda42a 100644
--- a/UefiCpuPkg/SecCore/SecCore.inf
+++ b/UefiCpuPkg/SecCore/SecCore.inf
@@ -30,7 +30,7 @@
#
# The following information is for reference only and not required by the build tools.
#
-# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+# VALID_ARCHITECTURES = IA32 X64 EBC
#
[Sources]
diff --git a/UefiCpuPkg/UefiCpuPkg.dsc b/UefiCpuPkg/UefiCpuPkg.dsc index 2e4b0fd776..5c2239967f 100644
--- a/UefiCpuPkg/UefiCpuPkg.dsc
+++ b/UefiCpuPkg/UefiCpuPkg.dsc
@@ -19,7 +19,7 @@
PLATFORM_VERSION = 0.90
DSC_SPECIFICATION = 0x00010005
OUTPUT_DIRECTORY = Build/UefiCpu
- SUPPORTED_ARCHITECTURES = IA32|IPF|X64
+ SUPPORTED_ARCHITECTURES = IA32|X64
BUILD_TARGETS = DEBUG|RELEASE|NOOPT
SKUID_IDENTIFIER = DEFAULT
@@ -81,9 +81,6 @@
PeiServicesTablePointerLib|MdePkg/Library/PeiServicesTablePointerLibIdt/PeiServicesTablePointerLibIdt.inf
CpuExceptionHandlerLib|UefiCpuPkg/Library/CpuExceptionHandlerLib/PeiCpuExceptionHandlerLib.inf
-[LibraryClasses.IPF.PEIM]
- PeiServicesTablePointerLib|MdePkg/Library/PeiServicesTablePointerLibKr7/PeiServicesTablePointerLibKr7.inf
-
[LibraryClasses.common.DXE_DRIVER]
MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
--
2.16.2.windows.1
prev parent reply other threads:[~2018-06-13 8:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-13 3:46 [PATCH 36/37] UefiCpuPkg: Removing ipf which is no longer supported from edk2 chenc2
2018-06-13 8:51 ` Dong, Eric [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ED077930C258884BBCB450DB737E66224AC17CFE@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox