From: "Dong, Eric" <eric.dong@intel.com>
To: "Kubacki, Michael A" <michael.a.kubacki@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Gao, Liming" <liming.gao@intel.com>
Subject: Re: [edk2-platforms][PATCH V2 3/3] BoardModulePkg/FirmwareBootMediaInfoPei: Add module
Date: Tue, 8 Oct 2019 07:02:23 +0000 [thread overview]
Message-ID: <ED077930C258884BBCB450DB737E662259F0955E@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <20191004172924.20240-4-michael.a.kubacki@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
> -----Original Message-----
> From: Kubacki, Michael A
> Sent: Saturday, October 5, 2019 1:29 AM
> To: devel@edk2.groups.io
> Cc: Dong, Eric <eric.dong@intel.com>; Gao, Liming <liming.gao@intel.com>
> Subject: [edk2-platforms][PATCH V2 3/3]
> BoardModulePkg/FirmwareBootMediaInfoPei: Add module
>
> REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2229
>
> Adds a new module that is responsible for publishing the boot
> media device information that will be used in the boot flow for
> system initialization decisions dependent upon firmware boot
> media.
>
> The module depends on a library class to implement the board-
> specific details to get the firmware boot media device. This
> allows the module to remain consistent in its responsibility
> across implementations and the details to be easily substituted.
>
> Cc: Eric Dong <eric.dong@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
> ---
> Platform/Intel/BoardModulePkg/BoardModulePkg.dsc | 3 +
>
> Platform/Intel/BoardModulePkg/FirmwareBootMediaInfo/FirmwareBootMedi
> aInfoPei.inf | 46 ++++++++++++
>
> Platform/Intel/BoardModulePkg/FirmwareBootMediaInfo/FirmwareBootMedi
> aInfoPei.c | 76 ++++++++++++++++++++
> 3 files changed, 125 insertions(+)
>
> diff --git a/Platform/Intel/BoardModulePkg/BoardModulePkg.dsc
> b/Platform/Intel/BoardModulePkg/BoardModulePkg.dsc
> index 3d605cf876..5ec68ceebf 100644
> --- a/Platform/Intel/BoardModulePkg/BoardModulePkg.dsc
> +++ b/Platform/Intel/BoardModulePkg/BoardModulePkg.dsc
> @@ -31,9 +31,11 @@
> DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
> PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
> DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf
> + PeimEntryPoint|MdePkg/Library/PeimEntryPoint/PeimEntryPoint.inf
>
> [LibraryClasses.common.PEIM]
>
> FirmwareBootMediaLib|IntelSiliconPkg/Library/PeiDxeSmmBootMediaLib/PeiFi
> rmwareBootMediaLib.inf
> +
> FirmwareBootMediaInfoLib|BoardModulePkg/Library/PeiFirmwareBootMediaI
> nfoLib/PeiFirmwareBootMediaInfoLib.inf
> HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
>
> MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAll
> ocationLib.inf
>
> @@ -73,6 +75,7 @@
>
> ###############################################################
> ####################################
>
> [Components]
> + BoardModulePkg/FirmwareBootMediaInfo/FirmwareBootMediaInfoPei.inf
> BoardModulePkg/Library/CmosAccessLib/CmosAccessLib.inf
>
> BoardModulePkg/Library/PlatformCmosAccessLibNull/PlatformCmosAccessLib
> Null.inf
>
> diff --git
> a/Platform/Intel/BoardModulePkg/FirmwareBootMediaInfo/FirmwareBootMe
> diaInfoPei.inf
> b/Platform/Intel/BoardModulePkg/FirmwareBootMediaInfo/FirmwareBootMe
> diaInfoPei.inf
> new file mode 100644
> index 0000000000..a81932f2a1
> --- /dev/null
> +++
> b/Platform/Intel/BoardModulePkg/FirmwareBootMediaInfo/FirmwareBootMe
> diaInfoPei.inf
> @@ -0,0 +1,46 @@
> +## @file
> +# Firmware Boot Media Info Module
> +#
> +# This module publishes firmware boot media device information used in the
> boot flow for system initialization
> +# decisions dependent upon the firmware boot media.
> +#
> +# This module depends upon a library instance to actually perform firmware
> boot media device detection since the
> +# detection mechanism will vary across systems. In many cases, the media
> type may simply be set to a single firmware
> +# boot media device with no run-time logic required. In any case, this module
> should dispatch as early as possible in
> +# the system boot flow so the firmware boot media information is available
> for other modules. If any dependencies are
> +# required to dynamically determine the firmware boot media device, those
> should be in the DEPEX section of the active
> +# FirmwareBootMediaInfoLib such that this module will dispatch once those
> dependencies are satisfied.
> +#
> +# Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x00010017
> + BASE_NAME = FirmwareBootMediaInfoPei
> + FILE_GUID = A8F14FA9-FC88-45F4-A622-F06E6C56E632
> + VERSION_STRING = 1.0
> + MODULE_TYPE = PEIM
> + ENTRY_POINT = FirmwareBootMediaInfoPeiEntry
> +
> +[LibraryClasses]
> + BaseLib
> + DebugLib
> + FirmwareBootMediaLib
> + FirmwareBootMediaInfoLib
> + HobLib
> + PeimEntryPoint
> + PeiServicesLib
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> + IntelSiliconPkg/IntelSiliconPkg.dec
> + BoardModulePkg/BoardModulePkg.dec
> +
> +[Sources]
> + FirmwareBootMediaInfoPei.c
> +
> +[Depex]
> + TRUE
> diff --git
> a/Platform/Intel/BoardModulePkg/FirmwareBootMediaInfo/FirmwareBootMe
> diaInfoPei.c
> b/Platform/Intel/BoardModulePkg/FirmwareBootMediaInfo/FirmwareBootMe
> diaInfoPei.c
> new file mode 100644
> index 0000000000..7a71071053
> --- /dev/null
> +++
> b/Platform/Intel/BoardModulePkg/FirmwareBootMediaInfo/FirmwareBootMe
> diaInfoPei.c
> @@ -0,0 +1,76 @@
> +/** @file
> + Firmware Boot Media Info Module
> +
> + This module publishes firmware boot media device information used in the
> boot flow for system initialization
> + decisions dependent upon the firmware boot media.
> +
> + This module depends upon a library instance to actually perform firmware
> boot media device detection since the
> + detection mechanism will vary across systems. In many cases, the media
> type may simply be set to a single firmware
> + boot media device with no run-time logic required. In any case, this module
> should dispatch as early as possible in
> + the system boot flow so the firmware boot media information is available for
> other modules. If any dependencies are
> + required to dynamically determine the firmware boot media device, those
> should be in the DEPEX section of the active
> + FirmwareBootMediaInfoLib such that this module will dispatch once those
> dependencies are satisfied.
> +
> +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
> +SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#include <Library/BaseLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/FirmwareBootMediaLib.h>
> +#include <Library/FirmwareBootMediaInfoLib.h>
> +#include <Library/HobLib.h>
> +
> +/**
> + Produces a gFirmwareBootMediaHobGuid HOB instance.
> +
> + @retval EFI_SUCCESS The firmware boot media HOB was produced
> successfully.
> + @retval EFI_NOT_FOUND The firmware boot media device information
> could not be found to produce the
> + the firmware boot media HOB.
> +**/
> +EFI_STATUS
> +EFIAPI
> +ProduceFirmwareBootMediaHob (
> + VOID
> + )
> +{
> + FW_BOOT_MEDIA_HOB_DATA FwBootMediaHobData;
> +
> + FwBootMediaHobData.BootMedia = IdentifyFirmwareBootMediaType ();
> + if (FwBootMediaHobData.BootMedia == FwBootMediaMax) {
> + return EFI_NOT_FOUND;
> + }
> +
> + BuildGuidDataHob (
> + &gFirmwareBootMediaHobGuid,
> + &FwBootMediaHobData,
> + sizeof (FW_BOOT_MEDIA_HOB_DATA)
> + );
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Attempts to publish the firmware boot media HOB.
> +
> + @param FileHandle Handle of the file being invoked.
> + @param PeiServices Describes the list of possible PEI Services.
> +
> + @retval EFI_SUCCESS Produce the BootMedia Hob successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +FirmwareBootMediaInfoPeiEntry (
> + IN EFI_PEI_FILE_HANDLE FileHandle,
> + IN CONST EFI_PEI_SERVICES **PeiServices
> + )
> +{
> + EFI_STATUS Status;
> +
> + Status = ProduceFirmwareBootMediaHob ();
> + ASSERT_EFI_ERROR (Status);
> +
> + return Status;
> +}
> --
> 2.16.2.windows.1
prev parent reply other threads:[~2019-10-08 7:02 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-04 17:29 [edk2-platforms][PATCH V2 0/3] Add FW Boot Media Device Indicator Kubacki, Michael A
2019-10-04 17:29 ` [edk2-platforms][PATCH V2 1/3] IntelSiliconPkg/FirmwareBootMediaLib: Add library Kubacki, Michael A
2019-10-07 1:45 ` Chaganty, Rangasai V
2019-10-09 9:35 ` Ni, Ray
2019-10-09 16:33 ` Kubacki, Michael A
2019-10-10 2:21 ` Ni, Ray
2019-10-10 4:42 ` Kubacki, Michael A
2019-10-10 5:44 ` Ni, Ray
2019-10-04 17:29 ` [edk2-platforms][PATCH V2 2/3] BoardModulePkg/FirmwareBootMediaInfoLib: " Kubacki, Michael A
2019-10-08 7:01 ` Dong, Eric
2019-10-04 17:29 ` [edk2-platforms][PATCH V2 3/3] BoardModulePkg/FirmwareBootMediaInfoPei: Add module Kubacki, Michael A
2019-10-08 7:02 ` Dong, Eric [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ED077930C258884BBCB450DB737E662259F0955E@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox