* [PATCH v6 00/42] SEV-ES guest support
@ 2020-03-24 17:40 Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 01/42] MdePkg: Create PCDs to be used in support of SEV-ES Lendacky, Thomas
` (42 more replies)
0 siblings, 43 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh, Benjamin You,
Dandan Bi, Guo Dong, Hao A Wu, Jian J Wang, Maurice Ma
This patch series provides support for running EDK2/OVMF under SEV-ES.
Secure Encrypted Virtualization - Encrypted State (SEV-ES) expands on the
SEV support to protect the guest register state from the hypervisor. See
"AMD64 Architecture Programmer's Manual Volume 2: System Programming",
section "15.35 Encrypted State (SEV-ES)" [1].
In order to allow a hypervisor to perform functions on behalf of a guest,
there is architectural support for notifying a guest's operating system
when certain types of VMEXITs are about to occur. This allows the guest to
selectively share information with the hypervisor to satisfy the requested
function. The notification is performed using a new exception, the VMM
Communication exception (#VC). The information is shared through the
Guest-Hypervisor Communication Block (GHCB) using the VMGEXIT instruction.
The GHCB format and the protocol for using it is documented in "SEV-ES
Guest-Hypervisor Communication Block Standardization" [2].
The main areas of the EDK2 code that are updated to support SEV-ES are
around the exception handling support and the AP boot support.
Exception support is required starting in Sec, continuing through Pei
and into Dxe in order to handle #VC exceptions that are generated. Each
AP requires it's own GHCB page as well as a page to hold values specific
to that AP.
AP booting poses some interesting challenges. The INIT-SIPI-SIPI sequence
is typically used to boot the APs. However, the hypervisor is not allowed
to update the guest registers. The GHCB document [2] talks about how SMP
booting under SEV-ES is performed.
Since the GHCB page must be a shared (unencrypted) page, the processor
must be running in long mode in order for the guest and hypervisor to
communicate with each other. As a result, SEV-ES is only supported under
the X64 architecture.
[1] https://www.amd.com/system/files/TechDocs/24593.pdf
[2] https://developer.amd.com/wp-content/resources/56421.pdf
---
These patches are based on commit:
2f524a745e23 ("BaseTools:Fix build tools print traceback info issue")
Proper execution of SEV-ES relies on Bugzilla 2340 being fixed.
A version of the tree (with an extra patch to workaround Bugzilla 2340) can
be found at:
https://github.com/AMDESE/ovmf/tree/sev-es-v13
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Changes since v5:
- Remove extraneous VmgExitLib usage
- Miscellaneous changes to address feedback (coding style, etc.)
Changes since v4:
- Move the SEV-ES protocol negotiation out of the SEC exception handler
and into the SecMain.c file. As a result:
- Move the SecGhcb related PCDs out of UefiCpuPkg and into OvmfPkg
- Combine SecAMDSevVcHandler.c and PeiDxeAMDSevVcHandler.c into a
single AMDSevVcHandler.c
- Consolidate VmgExitLib usage into common LibraryClasses sections
- Add documentation comments to the VmgExitLib functions
Changes since v3:
- Remove the need for the MP library finalization routine. The AP
jump table address will be held by the hypervisor rather than
communicated via the GHCB MSR. This removes some fragility around
the UEFI to OS transition.
- Rename the SEV-ES RIP reset area to SEV-ES workarea and use it to
communicate the SEV-ES status, so that SEC CPU exception handling is
only established for an SEV-ES guest.
- Fix SMM build breakageAdd around QemuFlashPtrWrite().
- Fix SMM build breakage by adding VC exception support the SMM CPU
exception handling.
- Add memory fencing around the invocation of AsmVmgExit().
- Clarify comments around the SEV-ES AP reset RIP values and usage.
- Move some PCD definitions from MdeModulePkg to UefiCpuPkg.
- Remove the 16-bit code selector definition from MdeModulePkg
Changes since v2:
- Added a way to locate the SEV-ES fixed AP RIP address for starting
AP's to avoid updating the actual flash image (build time location
that is identified with a GUID value).
- Create a VmgExit library to replace static inline functions.
- Move some PCDs to the appropriate packages
- Add support for writing to QEMU flash under SEV-ES
- Add additional MMIO opcode support
- Cleaned up the GHCB MSR CPUID protocol support
Changes since v1:
- Patches reworked to be more specific to the component/area being updated
and order of definition/usage
- Created a library for VMGEXIT-related functions to replace use of inline
functions
- Allocation method for GDT changed from AllocatePool to AllocatePages
- Early caching only enabled for SEV-ES guests
- Ensure AP loop mode set to halt loop mode for SEV-ES guests
- Reserved SEC GHCB-related memory areas when S3 is enabled
Tom Lendacky (42):
MdePkg: Create PCDs to be used in support of SEV-ES
MdePkg: Add the MSR definition for the GHCB register
MdePkg: Add a structure definition for the GHCB
MdeModulePkg/DxeIplPeim: Support GHCB pages when creating page tables
MdePkg/BaseLib: Add support for the XGETBV instruction
MdePkg/BaseLib: Add support for the VMGEXIT instruction
UefiCpuPkg: Implement library support for VMGEXIT
OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library
UefiPayloadPkg: Prepare UefiPayloadPkg to use the VmgExitLib library
UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC exception
UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE events
UefiCpuPkg/CpuExceptionHandler: Support string IO for IOIO_PROT NAE
events
UefiCpuPkg/CpuExceptionHandler: Add support for CPUID NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE events (MMIO)
UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for INVD NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP NAE events
UefiCpuPkg/CpuExceptionHandler: Add support for MONITOR/MONITORX NAE
events
UefiCpuPkg/CpuExceptionHandler: Add support for MWAIT/MWAITX NAE
events
UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write NAE
events
OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator function
OvmfPkg: Add support to perform SEV-ES initialization
OvmfPkg: Create a GHCB page for use during Sec phase
OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is supported
OvmfPkg: Create GHCB pages for use during Pei and Dxe phase
OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is enabled
UefiCpuPkg: Create an SEV-ES workarea PCD
OvmfPkg: Reserve a page in memory for the SEV-ES usage
OvmfPkg/ResetVector: Add support for a 32-bit SEV check
OvmfPkg/Sec: Add #VC exception handling for Sec phase
OvmfPkg/Sec: Enable cache early to speed up booting
OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash detection with
SEV-ES is enabled
UefiCpuPkg: Add a 16-bit protected mode code segment descriptor
UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is
enabled
UefiCpuPkg: Allow AP booting under SEV-ES
OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector
OvmfPkg: Move the GHCB allocations into reserved memory
UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use
MdeModulePkg/MdeModulePkg.dec | 9 +
OvmfPkg/OvmfPkg.dec | 9 +
UefiCpuPkg/UefiCpuPkg.dec | 17 +
OvmfPkg/OvmfPkgIa32.dsc | 6 +
OvmfPkg/OvmfPkgIa32X64.dsc | 6 +
OvmfPkg/OvmfPkgX64.dsc | 6 +
OvmfPkg/OvmfXen.dsc | 1 +
UefiCpuPkg/UefiCpuPkg.dsc | 2 +
UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 2 +
UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc | 2 +
OvmfPkg/OvmfPkgX64.fdf | 9 +
MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf | 2 +
MdePkg/Library/BaseLib/BaseLib.inf | 4 +
OvmfPkg/PlatformPei/PlatformPei.inf | 7 +
.../FvbServicesRuntimeDxe.inf | 2 +
OvmfPkg/ResetVector/ResetVector.inf | 8 +
OvmfPkg/Sec/SecMain.inf | 4 +
.../DxeCpuExceptionHandlerLib.inf | 5 +
.../PeiCpuExceptionHandlerLib.inf | 5 +
.../SecPeiCpuExceptionHandlerLib.inf | 5 +
.../SmmCpuExceptionHandlerLib.inf | 5 +
UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf | 4 +
UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 4 +
UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf | 33 +
.../Core/DxeIplPeim/X64/VirtualMemory.h | 12 +-
MdePkg/Include/Library/BaseLib.h | 31 +
MdePkg/Include/Register/Amd/Fam17Msr.h | 42 +
MdePkg/Include/Register/Amd/Ghcb.h | 136 ++
OvmfPkg/Include/Library/MemEncryptSevLib.h | 12 +
.../QemuFlash.h | 6 +
UefiCpuPkg/CpuDxe/CpuGdt.h | 4 +-
UefiCpuPkg/Include/Library/VmgExitLib.h | 111 ++
.../CpuExceptionHandlerLib/AMDSevVcCommon.h | 26 +
.../CpuExceptionCommon.h | 2 +
UefiCpuPkg/Library/MpInitLib/MpLib.h | 68 +-
.../Core/DxeIplPeim/Ia32/DxeLoadFunc.c | 4 +-
.../Core/DxeIplPeim/X64/DxeLoadFunc.c | 11 +-
.../Core/DxeIplPeim/X64/VirtualMemory.c | 49 +-
MdePkg/Library/BaseLib/Ia32/GccInline.c | 45 +
MdePkg/Library/BaseLib/X64/GccInline.c | 47 +
.../MemEncryptSevLibInternal.c | 75 +-
OvmfPkg/PlatformPei/AmdSev.c | 82 ++
OvmfPkg/PlatformPei/MemDetect.c | 23 +
.../QemuFlash.c | 23 +-
.../QemuFlashDxe.c | 15 +
.../QemuFlashSmm.c | 9 +
OvmfPkg/Sec/SecMain.c | 160 ++-
UefiCpuPkg/CpuDxe/CpuGdt.c | 8 +-
.../CpuExceptionHandlerLib/AMDSevVcHandler.c | 29 +
.../CpuExceptionCommon.c | 2 +-
.../Ia32/ArchAMDSevVcHandler.c | 24 +
.../PeiDxeSmmCpuException.c | 16 +
.../SecPeiCpuException.c | 16 +
.../X64/ArchAMDSevVcHandler.c | 1237 +++++++++++++++++
UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 114 +-
UefiCpuPkg/Library/MpInitLib/MpLib.c | 257 +++-
UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 19 +
UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c | 249 ++++
UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c | 2 +-
MdePkg/Library/BaseLib/Ia32/VmgExit.nasm | 37 +
MdePkg/Library/BaseLib/Ia32/XGetBv.nasm | 31 +
MdePkg/Library/BaseLib/X64/VmgExit.nasm | 32 +
MdePkg/Library/BaseLib/X64/XGetBv.nasm | 34 +
OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 100 ++
OvmfPkg/ResetVector/Ia32/PageTables64.asm | 351 ++++-
OvmfPkg/ResetVector/ResetVector.nasmb | 20 +
.../X64/ExceptionHandlerAsm.nasm | 17 +
UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc | 2 +-
.../Library/MpInitLib/Ia32/MpFuncs.nasm | 15 +
UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc | 4 +-
UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 370 ++++-
UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni | 15 +
.../ResetVector/Vtf0/Ia16/Real16ToFlat32.asm | 9 +
73 files changed, 4061 insertions(+), 99 deletions(-)
create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
create mode 100644 MdePkg/Include/Register/Amd/Ghcb.h
create mode 100644 UefiCpuPkg/Include/Library/VmgExitLib.h
create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcCommon.h
create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcHandler.c
create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/Ia32/ArchAMDSevVcHandler.c
create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c
create mode 100644 MdePkg/Library/BaseLib/Ia32/VmgExit.nasm
create mode 100644 MdePkg/Library/BaseLib/Ia32/XGetBv.nasm
create mode 100644 MdePkg/Library/BaseLib/X64/VmgExit.nasm
create mode 100644 MdePkg/Library/BaseLib/X64/XGetBv.nasm
create mode 100644 OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni
--
2.17.1
^ permalink raw reply [flat|nested] 50+ messages in thread
* [PATCH v6 01/42] MdePkg: Create PCDs to be used in support of SEV-ES
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 02/42] MdePkg: Add the MSR definition for the GHCB register Lendacky, Thomas
` (41 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh, Jian J Wang,
Hao A Wu
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Three new dynamic PCDs are needed to support SEV-ES under OVMF:
- PcdSevEsIsEnabled: BOOLEAN value used to indicate if SEV-ES is enabled
- PcdGhcbBase: UINT64 value that is the base address of the GHCB
allocation.
- PcdGhcbSize: UINT64 value that is the size, in bytes, of the
GHCB allocation (size is dependent on the number of
APs).
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
MdeModulePkg/MdeModulePkg.dec | 9 +++++++++
UefiCpuPkg/UefiCpuPkg.dec | 6 ++++++
2 files changed, 15 insertions(+)
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 91a3c608231c..c144b23233db 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -2071,6 +2071,15 @@ [PcdsDynamic, PcdsDynamicEx]
# @Prompt If there is any test key used by the platform.
gEfiMdeModulePkgTokenSpaceGuid.PcdTestKeyUsed|FALSE|BOOLEAN|0x00030003
+ ## This dynamic PCD holds the base address of the GHCB pool allocation.
+ # @Prompt GHCB Pool Base Address
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase|0|UINT64|0x00030007
+
+ ## This dynamic PCD holds the total size of the GHCB pool allocation.
+ # The amount of memory allocated for GHCBs is dependent on the number of APs.
+ # @Prompt GHCB Pool Size
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbSize|0|UINT64|0x00030008
+
[PcdsDynamicEx]
## This dynamic PCD enables the default variable setting.
# Its value is the default store ID value. The default value is zero as Standard default.
diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec
index e91dc68cbeb2..2f30bf89615f 100644
--- a/UefiCpuPkg/UefiCpuPkg.dec
+++ b/UefiCpuPkg/UefiCpuPkg.dec
@@ -364,5 +364,11 @@ [PcdsDynamic, PcdsDynamicEx]
# @ValidRange 0x80000001 | 0 - 1
gUefiCpuPkgTokenSpaceGuid.PcdCpuProcTraceOutputScheme|0x0|UINT8|0x60000015
+ ## This dynamic PCD indicates whether SEV-ES is enabled
+ # TRUE - SEV-ES is enabled
+ # FALSE - SEV-ES is not enabled
+ # @Prompt SEV-ES Status
+ gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled|FALSE|BOOLEAN|0x60000016
+
[UserExtensions.TianoCore."ExtraFiles"]
UefiCpuPkgExtra.uni
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 02/42] MdePkg: Add the MSR definition for the GHCB register
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 01/42] MdePkg: Create PCDs to be used in support of SEV-ES Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 03/42] MdePkg: Add a structure definition for the GHCB Lendacky, Thomas
` (40 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
For SEV-ES, the GHCB page address is stored in the GHCB MSR register
(0xc0010130). Define the register and the format used for register
during GHCB protocol negotiation.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
MdePkg/Include/Register/Amd/Fam17Msr.h | 42 ++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/MdePkg/Include/Register/Amd/Fam17Msr.h b/MdePkg/Include/Register/Amd/Fam17Msr.h
index 6ef45a9b21d3..466a3143599c 100644
--- a/MdePkg/Include/Register/Amd/Fam17Msr.h
+++ b/MdePkg/Include/Register/Amd/Fam17Msr.h
@@ -17,6 +17,48 @@
#ifndef __FAM17_MSR_H__
#define __FAM17_MSR_H__
+/**
+ Secure Encrypted Virtualization - Encrypted State (SEV-ES) GHCB register
+
+**/
+#define MSR_SEV_ES_GHCB 0xc0010130
+
+/**
+ MSR information returned for #MSR_SEV_ES_GHCB
+**/
+typedef union {
+ struct {
+ UINT64 Function:12;
+ } GhcbInfo;
+
+ struct {
+ UINT8 Reserved[3];
+ UINT8 SevEncryptionBitPos;
+ UINT16 SevEsProtocolMin;
+ UINT16 SevEsProtocolMax;
+ } GhcbProtocol;
+
+ struct {
+ UINT64 Function:12;
+ UINT64 ReasonCodeSet:4;
+ UINT64 ReasonCode:8;
+ } GhcbTerminate;
+
+ VOID *Ghcb;
+
+ UINT64 GhcbPhysicalAddress;
+} MSR_SEV_ES_GHCB_REGISTER;
+
+#define GHCB_INFO_SEV_INFO 1
+#define GHCB_INFO_SEV_INFO_GET 2
+#define GHCB_INFO_CPUID_REQUEST 4
+#define GHCB_INFO_CPUID_RESPONSE 5
+#define GHCB_INFO_TERMINATE_REQUEST 256
+
+#define GHCB_TERMINATE_GHCB 0
+#define GHCB_TERMINATE_GHCB_GENERAL 0
+#define GHCB_TERMINATE_GHCB_PROTOCOL 1
+
/**
Secure Encrypted Virtualization (SEV) status register
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 03/42] MdePkg: Add a structure definition for the GHCB
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 01/42] MdePkg: Create PCDs to be used in support of SEV-ES Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 02/42] MdePkg: Add the MSR definition for the GHCB register Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 04/42] MdeModulePkg/DxeIplPeim: Support GHCB pages when creating page tables Lendacky, Thomas
` (39 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
The GHCB is used by an SEV-ES guest for communicating between the guest
and the hypervisor. Create the GHCB definition as defined by the GHCB
protocol definition.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
MdePkg/Include/Register/Amd/Ghcb.h | 136 +++++++++++++++++++++++++++++
1 file changed, 136 insertions(+)
create mode 100644 MdePkg/Include/Register/Amd/Ghcb.h
diff --git a/MdePkg/Include/Register/Amd/Ghcb.h b/MdePkg/Include/Register/Amd/Ghcb.h
new file mode 100644
index 000000000000..ffad7efd82d9
--- /dev/null
+++ b/MdePkg/Include/Register/Amd/Ghcb.h
@@ -0,0 +1,136 @@
+/** @file
+ Guest-Hypervisor Communication Block (GHCB) Definition.
+
+ Provides data types allowing an SEV-ES guest to interact with the hypervisor
+ using the GHCB protocol.
+
+ Copyright (c) 2020, Advanced Micro Devices, Inc. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+ @par Specification Reference:
+ SEV-ES Guest-Hypervisor Communication Block Standardization
+
+**/
+
+#ifndef __GHCB_H__
+#define __GHCB_H__
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+
+#define UD_EXCEPTION 6
+#define GP_EXCEPTION 13
+
+#define GHCB_VERSION_MIN 1
+#define GHCB_VERSION_MAX 1
+
+#define GHCB_STANDARD_USAGE 0
+
+typedef enum {
+ SvmExitDr7Read = 0x27,
+ SvmExitDr7Write = 0x37,
+ SvmExitRdtsc = 0x6E,
+ SvmExitRdpmc,
+ SvmExitCpuid = 0x72,
+ SvmExitInvd = 0x76,
+ SvmExitIoioProt = 0x7B,
+ SvmExitMsr,
+ SvmExitVmmCall = 0x81,
+ SvmExitRdtscp = 0x87,
+ SvmExitWbinvd = 0x89,
+ SvmExitMonitor,
+ SvmExitMwait,
+ SvmExitNpf = 0x400,
+
+ // VMG special exits
+ SvmExitMmioRead = 0x80000001,
+ SvmExitMmioWrite,
+ SvmExitNmiComplete,
+ SvmExitApResetHold,
+ SvmExitApJumpTable,
+
+ SvmExitUnsupported = 0x8000FFFF,
+} SVM_EXITCODE;
+
+typedef enum {
+ GhcbCpl = 25,
+ GhcbRflags = 46,
+ GhcbRip,
+ GhcbRsp = 59,
+ GhcbRax = 63,
+ GhcbRcx = 97,
+ GhcbRdx,
+ GhcbRbx,
+ GhcbRbp = 101,
+ GhcbRsi,
+ GhcbRdi,
+ GhcbR8,
+ GhcbR9,
+ GhcbR10,
+ GhcbR11,
+ GhcbR12,
+ GhcbR13,
+ GhcbR14,
+ GhcbR15,
+ GhcbXCr0 = 125,
+} GHCB_REGISTER;
+
+typedef struct {
+ UINT8 Reserved1[203];
+ UINT8 Cpl;
+ UINT8 Reserved2[148];
+ UINT64 Dr7;
+ UINT8 Reserved3[144];
+ UINT64 Rax;
+ UINT8 Reserved4[264];
+ UINT64 Rcx;
+ UINT64 Rdx;
+ UINT64 Rbx;
+ UINT8 Reserved5[112];
+ UINT64 SwExitCode;
+ UINT64 SwExitInfo1;
+ UINT64 SwExitInfo2;
+ UINT64 SwScratch;
+ UINT8 Reserved6[56];
+ UINT64 XCr0;
+ UINT8 ValidBitmap[16];
+ UINT64 X87StateGpa;
+ UINT8 Reserved7[1016];
+} __attribute__ ((__packed__)) GHCB_SAVE_AREA;
+
+typedef struct {
+ GHCB_SAVE_AREA SaveArea;
+ UINT8 SharedBuffer[2032];
+ UINT8 Reserved1[10];
+ UINT16 ProtocolVersion;
+ UINT32 GhcbUsage;
+} __attribute__ ((__packed__)) __attribute__ ((aligned(SIZE_4KB))) GHCB;
+
+typedef union {
+ struct {
+ UINT32 Lower32Bits;
+ UINT32 Upper32Bits;
+ } Elements;
+
+ UINT64 Uint64;
+} GHCB_EXIT_INFO;
+
+typedef union {
+ struct {
+ UINT32 Vector:8;
+ UINT32 Type:3;
+ UINT32 ErrorCodeValid:1;
+ UINT32 Rsvd:19;
+ UINT32 Valid:1;
+ UINT32 ErrorCode;
+ } Elements;
+
+ UINT64 Uint64;
+} GHCB_EVENT_INJECTION;
+
+#define GHCB_EVENT_INJECTION_TYPE_INT 0
+#define GHCB_EVENT_INJECTION_TYPE_NMI 2
+#define GHCB_EVENT_INJECTION_TYPE_EXCEPTION 3
+#define GHCB_EVENT_INJECTION_TYPE_SOFT_INT 4
+
+#endif
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 04/42] MdeModulePkg/DxeIplPeim: Support GHCB pages when creating page tables
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (2 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 03/42] MdePkg: Add a structure definition for the GHCB Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 05/42] MdePkg/BaseLib: Add support for the XGETBV instruction Lendacky, Thomas
` (38 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh, Jian J Wang,
Hao A Wu, Dandan Bi
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
GHCB pages must be mapped as shared pages, so modify the process of
creating identity mapped pagetable entries so that GHCB entries are
created without the encryption bit set.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf | 2 +
.../Core/DxeIplPeim/X64/VirtualMemory.h | 12 ++++-
.../Core/DxeIplPeim/Ia32/DxeLoadFunc.c | 4 +-
.../Core/DxeIplPeim/X64/DxeLoadFunc.c | 11 ++++-
.../Core/DxeIplPeim/X64/VirtualMemory.c | 49 ++++++++++++++-----
5 files changed, 62 insertions(+), 16 deletions(-)
diff --git a/MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf b/MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
index 98bc17fc9d1f..5e6b78e295e6 100644
--- a/MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
+++ b/MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
@@ -111,6 +111,8 @@ [Pcd.IA32,Pcd.X64]
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPropertyMask ## CONSUMES
gEfiMdeModulePkgTokenSpaceGuid.PcdCpuStackGuard ## CONSUMES
gEfiMdeModulePkgTokenSpaceGuid.PcdUse5LevelPageTable ## SOMETIMES_CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase ## CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbSize ## CONSUMES
[Pcd.IA32,Pcd.X64,Pcd.ARM,Pcd.AARCH64]
gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack ## SOMETIMES_CONSUMES
diff --git a/MdeModulePkg/Core/DxeIplPeim/X64/VirtualMemory.h b/MdeModulePkg/Core/DxeIplPeim/X64/VirtualMemory.h
index 2d0493f109e8..6b7c38a441d6 100644
--- a/MdeModulePkg/Core/DxeIplPeim/X64/VirtualMemory.h
+++ b/MdeModulePkg/Core/DxeIplPeim/X64/VirtualMemory.h
@@ -201,6 +201,8 @@ EnableExecuteDisableBit (
@param[in, out] PageEntry2M Pointer to 2M page entry.
@param[in] StackBase Stack base address.
@param[in] StackSize Stack size.
+ @param[in] GhcbBase GHCB page area base address.
+ @param[in] GhcbSize GHCB page area size.
**/
VOID
@@ -208,7 +210,9 @@ Split2MPageTo4K (
IN EFI_PHYSICAL_ADDRESS PhysicalAddress,
IN OUT UINT64 *PageEntry2M,
IN EFI_PHYSICAL_ADDRESS StackBase,
- IN UINTN StackSize
+ IN UINTN StackSize,
+ IN EFI_PHYSICAL_ADDRESS GhcbBase,
+ IN UINTN GhcbSize
);
/**
@@ -217,6 +221,8 @@ Split2MPageTo4K (
@param[in] StackBase Stack base address.
@param[in] StackSize Stack size.
+ @param[in] GhcbBase GHCB page area base address.
+ @param[in] GhcbSize GHCB page area size.
@return The address of 4 level page map.
@@ -224,7 +230,9 @@ Split2MPageTo4K (
UINTN
CreateIdentityMappingPageTables (
IN EFI_PHYSICAL_ADDRESS StackBase,
- IN UINTN StackSize
+ IN UINTN StackSize,
+ IN EFI_PHYSICAL_ADDRESS GhcbBase,
+ IN UINTN GhcbkSize
);
diff --git a/MdeModulePkg/Core/DxeIplPeim/Ia32/DxeLoadFunc.c b/MdeModulePkg/Core/DxeIplPeim/Ia32/DxeLoadFunc.c
index 6e8ca824d469..284b34818ca7 100644
--- a/MdeModulePkg/Core/DxeIplPeim/Ia32/DxeLoadFunc.c
+++ b/MdeModulePkg/Core/DxeIplPeim/Ia32/DxeLoadFunc.c
@@ -123,7 +123,7 @@ Create4GPageTablesIa32Pae (
//
// Need to split this 2M page that covers stack range.
//
- Split2MPageTo4K (PhysicalAddress, (UINT64 *) PageDirectoryEntry, StackBase, StackSize);
+ Split2MPageTo4K (PhysicalAddress, (UINT64 *) PageDirectoryEntry, StackBase, StackSize, 0, 0);
} else {
//
// Fill in the Page Directory entries
@@ -282,7 +282,7 @@ HandOffToDxeCore (
//
// Create page table and save PageMapLevel4 to CR3
//
- PageTables = CreateIdentityMappingPageTables (BaseOfStack, STACK_SIZE);
+ PageTables = CreateIdentityMappingPageTables (BaseOfStack, STACK_SIZE, 0, 0);
//
// End of PEI phase signal
diff --git a/MdeModulePkg/Core/DxeIplPeim/X64/DxeLoadFunc.c b/MdeModulePkg/Core/DxeIplPeim/X64/DxeLoadFunc.c
index f465eb1d8ac4..156a477d8467 100644
--- a/MdeModulePkg/Core/DxeIplPeim/X64/DxeLoadFunc.c
+++ b/MdeModulePkg/Core/DxeIplPeim/X64/DxeLoadFunc.c
@@ -35,6 +35,8 @@ HandOffToDxeCore (
UINT32 Index;
EFI_VECTOR_HANDOFF_INFO *VectorInfo;
EFI_PEI_VECTOR_HANDOFF_INFO_PPI *VectorHandoffInfoPpi;
+ VOID *GhcbBase;
+ UINTN GhcbSize;
//
// Clear page 0 and mark it as allocated if NULL pointer detection is enabled.
@@ -81,12 +83,19 @@ HandOffToDxeCore (
TopOfStack = (VOID *) ((UINTN) BaseOfStack + EFI_SIZE_TO_PAGES (STACK_SIZE) * EFI_PAGE_SIZE - CPU_STACK_ALIGNMENT);
TopOfStack = ALIGN_POINTER (TopOfStack, CPU_STACK_ALIGNMENT);
+ //
+ // Get the address and size of the GHCB pages
+ //
+ GhcbBase = (VOID *) PcdGet64 (PcdGhcbBase);
+ GhcbSize = PcdGet64 (PcdGhcbSize);
+
PageTables = 0;
if (FeaturePcdGet (PcdDxeIplBuildPageTables)) {
//
// Create page table and save PageMapLevel4 to CR3
//
- PageTables = CreateIdentityMappingPageTables ((EFI_PHYSICAL_ADDRESS) (UINTN) BaseOfStack, STACK_SIZE);
+ PageTables = CreateIdentityMappingPageTables ((EFI_PHYSICAL_ADDRESS) (UINTN) BaseOfStack, STACK_SIZE,
+ (EFI_PHYSICAL_ADDRESS) (UINTN) GhcbBase, GhcbSize);
} else {
//
// Set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE
diff --git a/MdeModulePkg/Core/DxeIplPeim/X64/VirtualMemory.c b/MdeModulePkg/Core/DxeIplPeim/X64/VirtualMemory.c
index 516cf908bc88..32a81d1f3c21 100644
--- a/MdeModulePkg/Core/DxeIplPeim/X64/VirtualMemory.c
+++ b/MdeModulePkg/Core/DxeIplPeim/X64/VirtualMemory.c
@@ -181,6 +181,8 @@ EnableExecuteDisableBit (
@param Size Size of the given physical memory.
@param StackBase Base address of stack.
@param StackSize Size of stack.
+ @param GhcbBase Base address of GHCB pages.
+ @param GhcbSize Size of GHCB area.
@retval TRUE Page table should be split.
@retval FALSE Page table should not be split.
@@ -190,7 +192,9 @@ ToSplitPageTable (
IN EFI_PHYSICAL_ADDRESS Address,
IN UINTN Size,
IN EFI_PHYSICAL_ADDRESS StackBase,
- IN UINTN StackSize
+ IN UINTN StackSize,
+ IN EFI_PHYSICAL_ADDRESS GhcbBase,
+ IN UINTN GhcbSize
)
{
if (IsNullDetectionEnabled () && Address == 0) {
@@ -209,6 +213,12 @@ ToSplitPageTable (
}
}
+ if (GhcbBase) {
+ if ((Address < GhcbBase + GhcbSize) && ((Address + Size) > GhcbBase)) {
+ return TRUE;
+ }
+ }
+
return FALSE;
}
/**
@@ -322,6 +332,8 @@ AllocatePageTableMemory (
@param[in, out] PageEntry2M Pointer to 2M page entry.
@param[in] StackBase Stack base address.
@param[in] StackSize Stack size.
+ @param[in] GhcbBase GHCB page area base address.
+ @param[in] GhcbSize GHCB page area size.
**/
VOID
@@ -329,7 +341,9 @@ Split2MPageTo4K (
IN EFI_PHYSICAL_ADDRESS PhysicalAddress,
IN OUT UINT64 *PageEntry2M,
IN EFI_PHYSICAL_ADDRESS StackBase,
- IN UINTN StackSize
+ IN UINTN StackSize,
+ IN EFI_PHYSICAL_ADDRESS GhcbBase,
+ IN UINTN GhcbSize
)
{
EFI_PHYSICAL_ADDRESS PhysicalAddress4K;
@@ -355,7 +369,12 @@ Split2MPageTo4K (
//
// Fill in the Page Table entries
//
- PageTableEntry->Uint64 = (UINT64) PhysicalAddress4K | AddressEncMask;
+ PageTableEntry->Uint64 = (UINT64) PhysicalAddress4K;
+ if (!GhcbBase
+ || (PhysicalAddress4K < GhcbBase)
+ || (PhysicalAddress4K >= GhcbBase + GhcbSize)) {
+ PageTableEntry->Uint64 |= AddressEncMask;
+ }
PageTableEntry->Bits.ReadWrite = 1;
if ((IsNullDetectionEnabled () && PhysicalAddress4K == 0) ||
@@ -383,6 +402,8 @@ Split2MPageTo4K (
@param[in, out] PageEntry1G Pointer to 1G page entry.
@param[in] StackBase Stack base address.
@param[in] StackSize Stack size.
+ @param[in] GhcbBase GHCB page area base address.
+ @param[in] GhcbSize GHCB page area size.
**/
VOID
@@ -390,7 +411,9 @@ Split1GPageTo2M (
IN EFI_PHYSICAL_ADDRESS PhysicalAddress,
IN OUT UINT64 *PageEntry1G,
IN EFI_PHYSICAL_ADDRESS StackBase,
- IN UINTN StackSize
+ IN UINTN StackSize,
+ IN EFI_PHYSICAL_ADDRESS GhcbBase,
+ IN UINTN GhcbSize
)
{
EFI_PHYSICAL_ADDRESS PhysicalAddress2M;
@@ -413,11 +436,11 @@ Split1GPageTo2M (
PhysicalAddress2M = PhysicalAddress;
for (IndexOfPageDirectoryEntries = 0; IndexOfPageDirectoryEntries < 512; IndexOfPageDirectoryEntries++, PageDirectoryEntry++, PhysicalAddress2M += SIZE_2MB) {
- if (ToSplitPageTable (PhysicalAddress2M, SIZE_2MB, StackBase, StackSize)) {
+ if (ToSplitPageTable (PhysicalAddress2M, SIZE_2MB, StackBase, StackSize, GhcbBase, GhcbSize)) {
//
// Need to split this 2M page that covers NULL or stack range.
//
- Split2MPageTo4K (PhysicalAddress2M, (UINT64 *) PageDirectoryEntry, StackBase, StackSize);
+ Split2MPageTo4K (PhysicalAddress2M, (UINT64 *) PageDirectoryEntry, StackBase, StackSize, GhcbBase, GhcbSize);
} else {
//
// Fill in the Page Directory entries
@@ -616,6 +639,8 @@ EnablePageTableProtection (
@param[in] StackBase Stack base address.
@param[in] StackSize Stack size.
+ @param[in] GhcbBase GHCB base address.
+ @param[in] GhcbSize GHCB size.
@return The address of 4 level page map.
@@ -623,7 +648,9 @@ EnablePageTableProtection (
UINTN
CreateIdentityMappingPageTables (
IN EFI_PHYSICAL_ADDRESS StackBase,
- IN UINTN StackSize
+ IN UINTN StackSize,
+ IN EFI_PHYSICAL_ADDRESS GhcbBase,
+ IN UINTN GhcbSize
)
{
UINT32 RegEax;
@@ -809,8 +836,8 @@ CreateIdentityMappingPageTables (
PageDirectory1GEntry = (VOID *) PageDirectoryPointerEntry;
for (IndexOfPageDirectoryEntries = 0; IndexOfPageDirectoryEntries < 512; IndexOfPageDirectoryEntries++, PageDirectory1GEntry++, PageAddress += SIZE_1GB) {
- if (ToSplitPageTable (PageAddress, SIZE_1GB, StackBase, StackSize)) {
- Split1GPageTo2M (PageAddress, (UINT64 *) PageDirectory1GEntry, StackBase, StackSize);
+ if (ToSplitPageTable (PageAddress, SIZE_1GB, StackBase, StackSize, GhcbBase, GhcbSize)) {
+ Split1GPageTo2M (PageAddress, (UINT64 *) PageDirectory1GEntry, StackBase, StackSize, GhcbBase, GhcbSize);
} else {
//
// Fill in the Page Directory entries
@@ -840,11 +867,11 @@ CreateIdentityMappingPageTables (
PageDirectoryPointerEntry->Bits.Present = 1;
for (IndexOfPageDirectoryEntries = 0; IndexOfPageDirectoryEntries < 512; IndexOfPageDirectoryEntries++, PageDirectoryEntry++, PageAddress += SIZE_2MB) {
- if (ToSplitPageTable (PageAddress, SIZE_2MB, StackBase, StackSize)) {
+ if (ToSplitPageTable (PageAddress, SIZE_2MB, StackBase, StackSize, GhcbBase, GhcbSize)) {
//
// Need to split this 2M page that covers NULL or stack range.
//
- Split2MPageTo4K (PageAddress, (UINT64 *) PageDirectoryEntry, StackBase, StackSize);
+ Split2MPageTo4K (PageAddress, (UINT64 *) PageDirectoryEntry, StackBase, StackSize, GhcbBase, GhcbSize);
} else {
//
// Fill in the Page Directory entries
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 05/42] MdePkg/BaseLib: Add support for the XGETBV instruction
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (3 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 04/42] MdeModulePkg/DxeIplPeim: Support GHCB pages when creating page tables Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 06/42] MdePkg/BaseLib: Add support for the VMGEXIT instruction Lendacky, Thomas
` (37 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a CPUID instruction requires the current value of the XCR0
register. In order to retrieve that value, the XGETBV instruction needs
to be executed.
Provide the necessary support to execute the XGETBV instruction.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
MdePkg/Library/BaseLib/BaseLib.inf | 2 ++
MdePkg/Include/Library/BaseLib.h | 17 +++++++++++++
MdePkg/Library/BaseLib/Ia32/GccInline.c | 28 ++++++++++++++++++++
MdePkg/Library/BaseLib/X64/GccInline.c | 30 ++++++++++++++++++++++
MdePkg/Library/BaseLib/Ia32/XGetBv.nasm | 31 ++++++++++++++++++++++
MdePkg/Library/BaseLib/X64/XGetBv.nasm | 34 +++++++++++++++++++++++++
6 files changed, 142 insertions(+)
create mode 100644 MdePkg/Library/BaseLib/Ia32/XGetBv.nasm
create mode 100644 MdePkg/Library/BaseLib/X64/XGetBv.nasm
diff --git a/MdePkg/Library/BaseLib/BaseLib.inf b/MdePkg/Library/BaseLib/BaseLib.inf
index 3586beb0ab5c..d7a1dd017e95 100644
--- a/MdePkg/Library/BaseLib/BaseLib.inf
+++ b/MdePkg/Library/BaseLib/BaseLib.inf
@@ -152,6 +152,7 @@ [Sources.Ia32]
Ia32/ARShiftU64.c | MSFT
Ia32/EnableCache.c | MSFT
Ia32/DisableCache.c | MSFT
+ Ia32/XGetBv.nasm | MSFT
Ia32/GccInline.c | GCC
@@ -286,6 +287,7 @@ [Sources.X64]
X64/ReadCr2.nasm| MSFT
X64/ReadCr0.nasm| MSFT
X64/ReadEflags.nasm| MSFT
+ X64/XGetBv.nasm | MSFT
X64/Non-existing.c
diff --git a/MdePkg/Include/Library/BaseLib.h b/MdePkg/Include/Library/BaseLib.h
index ecadff8b235e..d0cbb52ed8f9 100644
--- a/MdePkg/Include/Library/BaseLib.h
+++ b/MdePkg/Include/Library/BaseLib.h
@@ -7889,6 +7889,23 @@ AsmLfence (
VOID
);
+/**
+ Executes a XGETBV instruction
+
+ Executes a XGETBV instruction. This function is only available on IA-32 and
+ x64.
+
+ @param[in] Index Extended control register index
+
+ @retval The current value of the extended control register
+**/
+UINT64
+EFIAPI
+AsmXGetBv (
+ IN UINT32 Index
+ );
+
+
/**
Patch the immediate operand of an IA32 or X64 instruction such that the byte,
word, dword or qword operand is encoded at the end of the instruction's
diff --git a/MdePkg/Library/BaseLib/Ia32/GccInline.c b/MdePkg/Library/BaseLib/Ia32/GccInline.c
index 5287200f8754..591f0bb0e097 100644
--- a/MdePkg/Library/BaseLib/Ia32/GccInline.c
+++ b/MdePkg/Library/BaseLib/Ia32/GccInline.c
@@ -1763,3 +1763,31 @@ AsmFlushCacheLine (
}
+/**
+ Executes a XGETBV instruction
+
+ Executes a XGETBV instruction. This function is only available on IA-32 and
+ x64.
+
+ @param[in] Index Extended control register index
+
+ @retval The current value of the extended control register
+**/
+UINT64
+EFIAPI
+AsmXGetBv (
+ IN UINT32 Index
+ )
+{
+ UINT64 Data;
+
+ __asm__ __volatile__ (
+ "xgetbv"
+ : "=A" (Data)
+ : "c" (Index)
+ );
+
+ return Data;
+}
+
+
diff --git a/MdePkg/Library/BaseLib/X64/GccInline.c b/MdePkg/Library/BaseLib/X64/GccInline.c
index 154ce1f57e92..3eed1205adb2 100644
--- a/MdePkg/Library/BaseLib/X64/GccInline.c
+++ b/MdePkg/Library/BaseLib/X64/GccInline.c
@@ -1798,3 +1798,33 @@ AsmFlushCacheLine (
}
+/**
+ Executes a XGETBV instruction
+
+ Executes a XGETBV instruction. This function is only available on IA-32 and
+ x64.
+
+ @param[in] Index Extended control register index
+
+ @retval The current value of the extended control register
+**/
+UINT64
+EFIAPI
+AsmXGetBv (
+ IN UINT32 Index
+ )
+{
+ UINT32 LowData;
+ UINT32 HighData;
+
+ __asm__ __volatile__ (
+ "xgetbv"
+ : "=a" (LowData),
+ "=d" (HighData)
+ : "c" (Index)
+ );
+
+ return (((UINT64)HighData) << 32) | LowData;
+}
+
+
diff --git a/MdePkg/Library/BaseLib/Ia32/XGetBv.nasm b/MdePkg/Library/BaseLib/Ia32/XGetBv.nasm
new file mode 100644
index 000000000000..b6dee38af029
--- /dev/null
+++ b/MdePkg/Library/BaseLib/Ia32/XGetBv.nasm
@@ -0,0 +1,31 @@
+;------------------------------------------------------------------------------
+;
+; Copyright (c) 2020, Advanced Micro Devices, Inc. All rights reserved.<BR>
+; SPDX-License-Identifier: BSD-2-Clause-Patent
+;
+; Module Name:
+;
+; XGetBv.Asm
+;
+; Abstract:
+;
+; AsmXgetBv function
+;
+; Notes:
+;
+;------------------------------------------------------------------------------
+
+ SECTION .text
+
+;------------------------------------------------------------------------------
+; UINT64
+; EFIAPI
+; AsmXGetBv (
+; IN UINT32 Index
+; );
+;------------------------------------------------------------------------------
+global ASM_PFX(AsmXGetBv)
+ASM_PFX(AsmXGetBv):
+ mov ecx, [esp + 4]
+ xgetbv
+ ret
diff --git a/MdePkg/Library/BaseLib/X64/XGetBv.nasm b/MdePkg/Library/BaseLib/X64/XGetBv.nasm
new file mode 100644
index 000000000000..f3aec43e6813
--- /dev/null
+++ b/MdePkg/Library/BaseLib/X64/XGetBv.nasm
@@ -0,0 +1,34 @@
+;------------------------------------------------------------------------------
+;
+; Copyright (c) 2020, Advanced Micro Devices, Inc. All rights reserved.<BR>
+; SPDX-License-Identifier: BSD-2-Clause-Patent
+;
+; Module Name:
+;
+; XGetBv.Asm
+;
+; Abstract:
+;
+; AsmXgetBv function
+;
+; Notes:
+;
+;------------------------------------------------------------------------------
+
+ DEFAULT REL
+ SECTION .text
+
+;------------------------------------------------------------------------------
+; UINT64
+; EFIAPI
+; AsmXGetBv (
+; IN UINT32 Index
+; );
+;------------------------------------------------------------------------------
+global ASM_PFX(AsmXGetBv)
+ASM_PFX(AsmXGetBv):
+ xgetbv
+ shl rdx, 32
+ or rax, rdx
+ ret
+
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 06/42] MdePkg/BaseLib: Add support for the VMGEXIT instruction
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (4 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 05/42] MdePkg/BaseLib: Add support for the XGETBV instruction Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 07/42] UefiCpuPkg: Implement library support for VMGEXIT Lendacky, Thomas
` (36 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
VMGEXIT is a new instruction used for Hypervisor/Guest communication when
running as an SEV-ES guest. A VMGEXIT will cause an automatic exit (AE)
to occur, resulting in a #VMEXIT with an exit code value of 0x403.
Provide the necessary support to execute the VMGEXIT instruction, which
is "rep; vmmcall".
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
MdePkg/Library/BaseLib/BaseLib.inf | 2 ++
MdePkg/Include/Library/BaseLib.h | 14 +++++++++
MdePkg/Library/BaseLib/Ia32/GccInline.c | 17 +++++++++++
MdePkg/Library/BaseLib/X64/GccInline.c | 17 +++++++++++
MdePkg/Library/BaseLib/Ia32/VmgExit.nasm | 37 ++++++++++++++++++++++++
MdePkg/Library/BaseLib/X64/VmgExit.nasm | 32 ++++++++++++++++++++
6 files changed, 119 insertions(+)
create mode 100644 MdePkg/Library/BaseLib/Ia32/VmgExit.nasm
create mode 100644 MdePkg/Library/BaseLib/X64/VmgExit.nasm
diff --git a/MdePkg/Library/BaseLib/BaseLib.inf b/MdePkg/Library/BaseLib/BaseLib.inf
index d7a1dd017e95..62a09197b8a8 100644
--- a/MdePkg/Library/BaseLib/BaseLib.inf
+++ b/MdePkg/Library/BaseLib/BaseLib.inf
@@ -153,6 +153,7 @@ [Sources.Ia32]
Ia32/EnableCache.c | MSFT
Ia32/DisableCache.c | MSFT
Ia32/XGetBv.nasm | MSFT
+ Ia32/VmgExit.nasm | MSFT
Ia32/GccInline.c | GCC
@@ -288,6 +289,7 @@ [Sources.X64]
X64/ReadCr0.nasm| MSFT
X64/ReadEflags.nasm| MSFT
X64/XGetBv.nasm | MSFT
+ X64/VmgExit.nasm | MSFT
X64/Non-existing.c
diff --git a/MdePkg/Include/Library/BaseLib.h b/MdePkg/Include/Library/BaseLib.h
index d0cbb52ed8f9..99fff8af5a3c 100644
--- a/MdePkg/Include/Library/BaseLib.h
+++ b/MdePkg/Include/Library/BaseLib.h
@@ -7906,6 +7906,20 @@ AsmXGetBv (
);
+/**
+ Executes a VMGEXIT instruction (VMMCALL with a REP prefix)
+
+ Executes a VMGEXIT instruction. This function is only available on IA-32 and
+ x64.
+
+**/
+VOID
+EFIAPI
+AsmVmgExit (
+ VOID
+ );
+
+
/**
Patch the immediate operand of an IA32 or X64 instruction such that the byte,
word, dword or qword operand is encoded at the end of the instruction's
diff --git a/MdePkg/Library/BaseLib/Ia32/GccInline.c b/MdePkg/Library/BaseLib/Ia32/GccInline.c
index 591f0bb0e097..ee8c62c79c93 100644
--- a/MdePkg/Library/BaseLib/Ia32/GccInline.c
+++ b/MdePkg/Library/BaseLib/Ia32/GccInline.c
@@ -1791,3 +1791,20 @@ AsmXGetBv (
}
+/**
+ Executes a VMGEXIT instruction.
+
+ Executes a VMGEXIT instruction. This function is only available on IA-32 and
+ X64.
+
+**/
+VOID
+EFIAPI
+AsmVmgExit (
+ VOID
+ )
+{
+ __asm__ __volatile__ ("rep; vmmcall":::"memory");
+}
+
+
diff --git a/MdePkg/Library/BaseLib/X64/GccInline.c b/MdePkg/Library/BaseLib/X64/GccInline.c
index 3eed1205adb2..277974eff9ee 100644
--- a/MdePkg/Library/BaseLib/X64/GccInline.c
+++ b/MdePkg/Library/BaseLib/X64/GccInline.c
@@ -1828,3 +1828,20 @@ AsmXGetBv (
}
+/**
+ Executes a VMGEXIT instruction.
+
+ Executes a VMGEXIT instruction. This function is only available on IA-32 and
+ X64.
+
+**/
+VOID
+EFIAPI
+AsmVmgExit (
+ VOID
+ )
+{
+ __asm__ __volatile__ ("rep; vmmcall":::"memory");
+}
+
+
diff --git a/MdePkg/Library/BaseLib/Ia32/VmgExit.nasm b/MdePkg/Library/BaseLib/Ia32/VmgExit.nasm
new file mode 100644
index 000000000000..cdf727825400
--- /dev/null
+++ b/MdePkg/Library/BaseLib/Ia32/VmgExit.nasm
@@ -0,0 +1,37 @@
+;------------------------------------------------------------------------------
+;
+; Copyright (c) 2020, Advanced Micro Devices, Inc. All rights reserved.<BR>
+; SPDX-License-Identifier: BSD-2-Clause-Patent
+;
+; Module Name:
+;
+; VmgExit.Asm
+;
+; Abstract:
+;
+; AsmVmgExit function
+;
+; Notes:
+;
+;------------------------------------------------------------------------------
+
+ SECTION .text
+
+;------------------------------------------------------------------------------
+; VOID
+; EFIAPI
+; AsmVmgExit (
+; VOID
+; );
+;------------------------------------------------------------------------------
+global ASM_PFX(AsmVmgExit)
+ASM_PFX(AsmVmgExit):
+;
+; NASM doesn't support the vmmcall instruction in 32-bit mode, so work around
+; this by temporarily switching to 64-bit mode.
+;
+BITS 64
+ rep vmmcall
+BITS 32
+ ret
+
diff --git a/MdePkg/Library/BaseLib/X64/VmgExit.nasm b/MdePkg/Library/BaseLib/X64/VmgExit.nasm
new file mode 100644
index 000000000000..6537a97b273c
--- /dev/null
+++ b/MdePkg/Library/BaseLib/X64/VmgExit.nasm
@@ -0,0 +1,32 @@
+;------------------------------------------------------------------------------
+;
+; Copyright (c) 2020, Advanced Micro Devices, Inc. All rights reserved.<BR>
+; SPDX-License-Identifier: BSD-2-Clause-Patent
+;
+; Module Name:
+;
+; VmgExit.Asm
+;
+; Abstract:
+;
+; AsmVmgExit function
+;
+; Notes:
+;
+;------------------------------------------------------------------------------
+
+ DEFAULT REL
+ SECTION .text
+
+;------------------------------------------------------------------------------
+; VOID
+; EFIAPI
+; AsmVmgExit (
+; VOID
+; );
+;------------------------------------------------------------------------------
+global ASM_PFX(AsmVmgExit)
+ASM_PFX(AsmVmgExit):
+ rep vmmcall
+ ret
+
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 07/42] UefiCpuPkg: Implement library support for VMGEXIT
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (5 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 06/42] MdePkg/BaseLib: Add support for the VMGEXIT instruction Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 08/42] OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library Lendacky, Thomas
` (35 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
To support issuing a VMGEXIT instruction, create a library that can be
used to perform GHCB and VMGEXIT related operations and to issue the
actual VMGEXIT instruction when using the GHCB.
Additionally, two VMGEXIT / MMIO related functions are created to support
flash emulation. Flash emulation currently is done by marking the flash
area as read-only and taking a nested page fault to perform the emulation
of the instruction. However, emulation cannot be performed because there
is no instruction decode assist support when SEV-ES is enabled. Provide
routines to initiate an MMIO request to perform actual writes to flash.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
UefiCpuPkg/UefiCpuPkg.dec | 3 +
UefiCpuPkg/UefiCpuPkg.dsc | 2 +
UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf | 33 +++
UefiCpuPkg/Include/Library/VmgExitLib.h | 111 +++++++++
UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c | 249 +++++++++++++++++++
UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni | 15 ++
6 files changed, 413 insertions(+)
create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
create mode 100644 UefiCpuPkg/Include/Library/VmgExitLib.h
create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c
create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni
diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec
index 2f30bf89615f..795d1c8dedba 100644
--- a/UefiCpuPkg/UefiCpuPkg.dec
+++ b/UefiCpuPkg/UefiCpuPkg.dec
@@ -53,6 +53,9 @@ [LibraryClasses.IA32, LibraryClasses.X64]
##
MpInitLib|Include/Library/MpInitLib.h
+ ## @libraryclass Provides function to support VMGEXIT processing.
+ VmgExitLib|Include/Library/VmgExitLib.h
+
[Guids]
gUefiCpuPkgTokenSpaceGuid = { 0xac05bf33, 0x995a, 0x4ed4, { 0xaa, 0xb8, 0xef, 0x7a, 0xe8, 0xf, 0x5c, 0xb0 }}
gMsegSmramGuid = { 0x5802bce4, 0xeeee, 0x4e33, { 0xa1, 0x30, 0xeb, 0xad, 0x27, 0xf0, 0xe4, 0x39 }}
diff --git a/UefiCpuPkg/UefiCpuPkg.dsc b/UefiCpuPkg/UefiCpuPkg.dsc
index d28cb5cccb52..997840452218 100644
--- a/UefiCpuPkg/UefiCpuPkg.dsc
+++ b/UefiCpuPkg/UefiCpuPkg.dsc
@@ -56,6 +56,7 @@ [LibraryClasses]
PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf
TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
+ VmgExitLib|UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
[LibraryClasses.common.SEC]
PlatformSecLib|UefiCpuPkg/Library/PlatformSecLibNull/PlatformSecLibNull.inf
@@ -136,6 +137,7 @@ [Components.IA32, Components.X64]
UefiCpuPkg/Library/SmmCpuPlatformHookLibNull/SmmCpuPlatformHookLibNull.inf
UefiCpuPkg/Library/SmmCpuFeaturesLib/SmmCpuFeaturesLib.inf
UefiCpuPkg/Library/SmmCpuFeaturesLib/SmmCpuFeaturesLibStm.inf
+ UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
UefiCpuPkg/PiSmmCommunication/PiSmmCommunicationPei.inf
UefiCpuPkg/PiSmmCommunication/PiSmmCommunicationSmm.inf
UefiCpuPkg/SecCore/SecCore.inf
diff --git a/UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf b/UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
new file mode 100644
index 000000000000..6acfa779e75a
--- /dev/null
+++ b/UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
@@ -0,0 +1,33 @@
+## @file
+# VMGEXIT Support Library.
+#
+# Copyright (c) 2019, Advanced Micro Devices, Inc. All rights reserved.<BR>
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = VmgExitLib
+ MODULE_UNI_FILE = VmgExitLib.uni
+ FILE_GUID = 3cd7368f-ef9b-4a9b-9571-2ed93813677e
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = VmgExitLib
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64
+#
+
+[Sources]
+ VmgExitLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
+
+[LibraryClasses]
+ BaseLib
+
diff --git a/UefiCpuPkg/Include/Library/VmgExitLib.h b/UefiCpuPkg/Include/Library/VmgExitLib.h
new file mode 100644
index 000000000000..602b213f1f63
--- /dev/null
+++ b/UefiCpuPkg/Include/Library/VmgExitLib.h
@@ -0,0 +1,111 @@
+/** @file
+ Public header file for the VMGEXIT Support library class.
+
+ This library class defines some routines used when invoking the VMGEXIT
+ instruction in support of SEV-ES.
+
+ Copyright (c) 2019, Advanced Micro Devices, Inc. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __VMG_EXIT_LIB_H__
+#define __VMG_EXIT_LIB_H__
+
+#include <Register/Amd/Ghcb.h>
+
+
+/**
+ Perform VMGEXIT.
+
+ Sets the necessary fields of the GHCB, invokes the VMGEXIT instruction and
+ then handles the return actions.
+
+ @param[in] GHCB A pointer to the GHCB
+ @param[in] ExitCode VMGEXIT code to be assigned to the SwExitCode field of
+ the GHCB.
+ @param[in] ExitInfo1 VMGEXIT information to be assigned to the SwExitInfo1
+ field of the GHCB.
+ @param[in] ExitInfo2 VMGEXIT information to be assigned to the SwExitInfo2
+ field of the GHCB.
+
+ @retval 0 VMGEXIT succeeded.
+ @retval Others VMGEXIT processing did not succeed. Exception number to
+ be issued.
+
+**/
+UINTN
+EFIAPI
+VmgExit (
+ GHCB *Ghcb,
+ UINT64 ExitCode,
+ UINT64 ExitInfo1,
+ UINT64 ExitInfo2
+ );
+
+/**
+ Perform pre-VMGEXIT initialization/preparation.
+
+ Performs the necessary steps in preparation for invoking VMGEXIT.
+
+ @param[in] GHCB A pointer to the GHCB
+
+**/
+VOID
+EFIAPI
+VmgInit (
+ GHCB *Ghcb
+ );
+
+/**
+ Perform post-VMGEXIT cleanup.
+
+ Performs the necessary steps to cleanup after invoking VMGEXIT.
+
+ @param[in] GHCB A pointer to the GHCB
+
+**/
+VOID
+EFIAPI
+VmgDone (
+ GHCB *Ghcb
+ );
+
+#define VMGMMIO_READ False
+#define VMGMMIO_WRITE True
+
+/**
+ Perform MMIO write of a buffer to a non-MMIO marked range.
+
+ Performs an MMIO write without taking a #VC. This is useful
+ for Flash devices, which are marked read-only.
+
+ @param[in] UINT8 A pointer to the destination buffer
+ @param[in] UINTN The immediate value to write
+ @param[in] UINTN Number of bytes to write
+
+**/
+VOID
+EFIAPI
+VmgMmioWrite (
+ UINT8 *Dest,
+ UINT8 *Src,
+ UINTN Bytes
+ );
+
+/**
+ Issue the GHCB set AP Jump Table VMGEXIT.
+
+ Performs a VMGEXIT using the GHCB AP Jump Table exit code to save the
+ AP Jump Table address with the hypervisor for retrieval at a later time.
+
+ @param[in] EFI_PHYSICAL_ADDRESS Physical address of the AP Jump Table
+
+**/
+UINTN
+EFIAPI
+VmgExitSetAPJumpTable (
+ EFI_PHYSICAL_ADDRESS Address
+ );
+
+#endif
diff --git a/UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c b/UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c
new file mode 100644
index 000000000000..92194d5c1544
--- /dev/null
+++ b/UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c
@@ -0,0 +1,249 @@
+/** @file
+ VMGEXIT Support Library.
+
+ Copyright (c) 2019, Advanced Micro Devices, Inc. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Uefi.h>
+#include <Library/BaseMemoryLib.h>
+#include <Register/Amd/Ghcb.h>
+#include <Register/Amd/Msr.h>
+
+STATIC
+UINT64
+VmgExitErrorCheck (
+ GHCB *Ghcb
+ )
+{
+ GHCB_EVENT_INJECTION Event;
+ GHCB_EXIT_INFO ExitInfo;
+ UINT64 Status;
+
+ ExitInfo.Uint64 = Ghcb->SaveArea.SwExitInfo1;
+ ASSERT ((ExitInfo.Elements.Lower32Bits == 0) ||
+ (ExitInfo.Elements.Lower32Bits == 1));
+
+ Status = 0;
+ if (ExitInfo.Elements.Lower32Bits == 0) {
+ return Status;
+ }
+
+ if (ExitInfo.Elements.Lower32Bits == 1) {
+ ASSERT (Ghcb->SaveArea.SwExitInfo2 != 0);
+
+ // Check that the return event is valid
+ Event.Uint64 = Ghcb->SaveArea.SwExitInfo2;
+ if (Event.Elements.Valid &&
+ Event.Elements.Type == GHCB_EVENT_INJECTION_TYPE_EXCEPTION) {
+ switch (Event.Elements.Vector) {
+ case GP_EXCEPTION:
+ case UD_EXCEPTION:
+ // Use returned event as return code
+ Status = Event.Uint64;
+ }
+ }
+ }
+
+ if (Status == 0) {
+ GHCB_EVENT_INJECTION Event;
+
+ Event.Uint64 = 0;
+ Event.Elements.Vector = GP_EXCEPTION;
+ Event.Elements.Type = GHCB_EVENT_INJECTION_TYPE_EXCEPTION;
+ Event.Elements.Valid = 1;
+
+ Status = Event.Uint64;
+ }
+
+ return Status;
+}
+
+/**
+ Perform VMGEXIT.
+
+ Sets the necessary fields of the GHCB, invokes the VMGEXIT instruction and
+ then handles the return actions.
+
+ @param[in] GHCB A pointer to the GHCB
+ @param[in] ExitCode VMGEXIT code to be assigned to the SwExitCode field of
+ the GHCB.
+ @param[in] ExitInfo1 VMGEXIT information to be assigned to the SwExitInfo1
+ field of the GHCB.
+ @param[in] ExitInfo2 VMGEXIT information to be assigned to the SwExitInfo2
+ field of the GHCB.
+
+ @retval 0 VMGEXIT succeeded.
+ @retval Others VMGEXIT processing did not succeed. Exception number to
+ be issued.
+
+**/
+UINT64
+EFIAPI
+VmgExit (
+ GHCB *Ghcb,
+ UINT64 ExitCode,
+ UINT64 ExitInfo1,
+ UINT64 ExitInfo2
+ )
+{
+ Ghcb->SaveArea.SwExitCode = ExitCode;
+ Ghcb->SaveArea.SwExitInfo1 = ExitInfo1;
+ Ghcb->SaveArea.SwExitInfo2 = ExitInfo2;
+
+ //
+ // Guest memory is used for the guest-hypervisor communication, so fence
+ // the invocation of the VMGEXIT instruction to ensure GHCB accesses are
+ // synchronized properly.
+ //
+ MemoryFence ();
+ AsmVmgExit ();
+ MemoryFence ();
+
+ return VmgExitErrorCheck (Ghcb);
+}
+
+/**
+ Perform pre-VMGEXIT initialization/preparation.
+
+ Performs the necessary steps in preparation for invoking VMGEXIT.
+
+ @param[in] GHCB A pointer to the GHCB
+
+**/
+VOID
+EFIAPI
+VmgInit (
+ GHCB *Ghcb
+ )
+{
+ SetMem (&Ghcb->SaveArea, sizeof (Ghcb->SaveArea), 0);
+}
+
+/**
+ Perform post-VMGEXIT cleanup.
+
+ Performs the necessary steps to cleanup after invoking VMGEXIT.
+
+ @param[in] GHCB A pointer to the GHCB
+
+**/
+VOID
+EFIAPI
+VmgDone (
+ GHCB *Ghcb
+ )
+{
+}
+
+STATIC
+UINTN
+EFIAPI
+VmgMmio (
+ UINT8 *MmioAddress,
+ UINT8 *Buffer,
+ UINTN Bytes,
+ BOOLEAN Write
+ )
+{
+ UINT64 MmioOp, ExitInfo1, ExitInfo2, Status;
+ GHCB *Ghcb;
+ MSR_SEV_ES_GHCB_REGISTER Msr;
+
+ Msr.GhcbPhysicalAddress = AsmReadMsr64 (MSR_SEV_ES_GHCB);
+ Ghcb = Msr.Ghcb;
+
+ //
+ // This function is about to set fields in the GHCB. Do not execute
+ // anything that will cause a #VC before issuing the VmgExit(). Any #VC
+ // will result in all GHCB settings being overwritten (this means, e.g.,
+ // do not add DEBUG() statements).
+ //
+ VmgInit (Ghcb);
+
+ if (Write) {
+ MmioOp = SvmExitMmioWrite;
+ } else {
+ MmioOp = SvmExitMmioRead;
+ }
+
+ ExitInfo1 = (UINT64) (UINTN) MmioAddress;
+ ExitInfo2 = Bytes;
+
+ if (Write) {
+ CopyMem (Ghcb->SharedBuffer, Buffer, Bytes);
+ }
+
+ Ghcb->SaveArea.SwScratch = (UINT64) (UINTN) Ghcb->SharedBuffer;
+ Status = VmgExit (Ghcb, MmioOp, ExitInfo1, ExitInfo2);
+ if (Status != 0) {
+ return Status;
+ }
+
+ if (!Write) {
+ CopyMem (Buffer, Ghcb->SharedBuffer, Bytes);
+ }
+
+ VmgDone (Ghcb);
+
+ return 0;
+}
+
+/**
+ Perform MMIO write of a buffer to a non-MMIO marked range.
+
+ Performs an MMIO write without taking a #VC. This is useful
+ for Flash devices, which are marked read-only.
+
+ @param[in] UINT8 A pointer to the destination buffer
+ @param[in] UINTN The immediate value to write
+ @param[in] UINTN Number of bytes to write
+
+**/
+VOID
+EFIAPI
+VmgMmioWrite (
+ UINT8 *Dest,
+ UINT8 *Src,
+ UINTN Bytes
+ )
+{
+ VmgMmio (Dest, Src, Bytes, TRUE);
+}
+
+/**
+ Issue the GHCB set AP Jump Table VMGEXIT.
+
+ Performs a VMGEXIT using the GHCB AP Jump Table exit code to save the
+ AP Jump Table address with the hypervisor for retrieval at a later time.
+
+ @param[in] EFI_PHYSICAL_ADDRESS Physical address of the AP Jump Table
+
+**/
+UINTN
+EFIAPI
+VmgExitSetAPJumpTable (
+ EFI_PHYSICAL_ADDRESS Address
+ )
+{
+ UINT64 ExitInfo1, ExitInfo2, Status;
+ GHCB *Ghcb;
+ MSR_SEV_ES_GHCB_REGISTER Msr;
+
+ Msr.GhcbPhysicalAddress = AsmReadMsr64 (MSR_SEV_ES_GHCB);
+ Ghcb = Msr.Ghcb;
+
+ VmgInit (Ghcb);
+
+ ExitInfo1 = 0;
+ ExitInfo2 = (UINT64) (UINTN) Address;
+
+ Status = VmgExit (Ghcb, SvmExitApJumpTable, ExitInfo1, ExitInfo2);
+
+ VmgDone (Ghcb);
+
+ return Status;
+}
+
diff --git a/UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni b/UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni
new file mode 100644
index 000000000000..e8656aae4726
--- /dev/null
+++ b/UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni
@@ -0,0 +1,15 @@
+// /** @file
+// VMGEXIT support library instance.
+//
+// VMGEXIT support library instance.
+//
+// Copyright (c) 2019, Advanced Micro Devices, Inc. All rights reserved.<BR>
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT #language en-US "VMGEXIT Support Library."
+
+#string STR_MODULE_DESCRIPTION #language en-US "VMGEXIT Support Library."
+
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 08/42] OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (6 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 07/42] UefiCpuPkg: Implement library support for VMGEXIT Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 09/42] UefiPayloadPkg: Prepare UefiPayloadPkg " Lendacky, Thomas
` (34 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Various CpuExceptionHandlerLib libraries will updated to use the new
VmgExitLib library. To prevent any build breakage, update the OvmfPkg
DSC files that use a form of the CpuExceptionHandlerLib library to
include the VmgExitLib library.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
OvmfPkg/OvmfPkgIa32.dsc | 1 +
OvmfPkg/OvmfPkgIa32X64.dsc | 1 +
OvmfPkg/OvmfPkgX64.dsc | 1 +
OvmfPkg/OvmfXen.dsc | 1 +
4 files changed, 4 insertions(+)
diff --git a/OvmfPkg/OvmfPkgIa32.dsc b/OvmfPkg/OvmfPkgIa32.dsc
index 02ca17db8b2a..2701630be8f0 100644
--- a/OvmfPkg/OvmfPkgIa32.dsc
+++ b/OvmfPkg/OvmfPkgIa32.dsc
@@ -219,6 +219,7 @@ [LibraryClasses]
[LibraryClasses.common]
BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
+ VmgExitLib|UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
[LibraryClasses.common.SEC]
TimerLib|OvmfPkg/Library/AcpiTimerLib/BaseRomAcpiTimerLib.inf
diff --git a/OvmfPkg/OvmfPkgIa32X64.dsc b/OvmfPkg/OvmfPkgIa32X64.dsc
index d08cf558c6aa..671fdfbbd47d 100644
--- a/OvmfPkg/OvmfPkgIa32X64.dsc
+++ b/OvmfPkg/OvmfPkgIa32X64.dsc
@@ -223,6 +223,7 @@ [LibraryClasses]
[LibraryClasses.common]
BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
+ VmgExitLib|UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
[LibraryClasses.common.SEC]
TimerLib|OvmfPkg/Library/AcpiTimerLib/BaseRomAcpiTimerLib.inf
diff --git a/OvmfPkg/OvmfPkgX64.dsc b/OvmfPkg/OvmfPkgX64.dsc
index b2dccc40a865..5abf83e05480 100644
--- a/OvmfPkg/OvmfPkgX64.dsc
+++ b/OvmfPkg/OvmfPkgX64.dsc
@@ -223,6 +223,7 @@ [LibraryClasses]
[LibraryClasses.common]
BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
+ VmgExitLib|UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
[LibraryClasses.common.SEC]
TimerLib|OvmfPkg/Library/AcpiTimerLib/BaseRomAcpiTimerLib.inf
diff --git a/OvmfPkg/OvmfXen.dsc b/OvmfPkg/OvmfXen.dsc
index 85fe39f7896c..4bf6335be767 100644
--- a/OvmfPkg/OvmfXen.dsc
+++ b/OvmfPkg/OvmfXen.dsc
@@ -204,6 +204,7 @@ [LibraryClasses]
[LibraryClasses.common]
BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
+ VmgExitLib|UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
[LibraryClasses.common.SEC]
QemuFwCfgLib|OvmfPkg/Library/QemuFwCfgLib/QemuFwCfgSecLib.inf
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 09/42] UefiPayloadPkg: Prepare UefiPayloadPkg to use the VmgExitLib library
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (7 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 08/42] OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 10/42] UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC exception Lendacky, Thomas
` (33 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Various CpuExceptionHandlerLib libraries will updated to use the new
VmgExitLib library. To prevent any build breakage, update the
UefiPayloadPkg DSC files that use a form of the CpuExceptionHandlerLib
library to include the VmgExitLib library.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 2 ++
UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc | 2 ++
2 files changed, 4 insertions(+)
diff --git a/UefiPayloadPkg/UefiPayloadPkgIa32.dsc b/UefiPayloadPkg/UefiPayloadPkgIa32.dsc
index d52945442e0e..c2f7217c964e 100644
--- a/UefiPayloadPkg/UefiPayloadPkgIa32.dsc
+++ b/UefiPayloadPkg/UefiPayloadPkgIa32.dsc
@@ -233,6 +233,7 @@ [LibraryClasses.common.DXE_CORE]
DebugAgentLib|SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgentLib.inf
!endif
CpuExceptionHandlerLib|UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
+ VmgExitLib|UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
[LibraryClasses.common.DXE_DRIVER]
PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
@@ -244,6 +245,7 @@ [LibraryClasses.common.DXE_DRIVER]
DebugAgentLib|SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgentLib.inf
!endif
CpuExceptionHandlerLib|UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
+ VmgExitLib|UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
MpInitLib|UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
[LibraryClasses.common.DXE_RUNTIME_DRIVER]
diff --git a/UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc b/UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc
index 0736cd995476..b7cfeeff9b49 100644
--- a/UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc
+++ b/UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc
@@ -234,6 +234,7 @@ [LibraryClasses.common.DXE_CORE]
DebugAgentLib|SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgentLib.inf
!endif
CpuExceptionHandlerLib|UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
+ VmgExitLib|UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
[LibraryClasses.common.DXE_DRIVER]
PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
@@ -245,6 +246,7 @@ [LibraryClasses.common.DXE_DRIVER]
DebugAgentLib|SourceLevelDebugPkg/Library/DebugAgent/DxeDebugAgentLib.inf
!endif
CpuExceptionHandlerLib|UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
+ VmgExitLib|UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
MpInitLib|UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
[LibraryClasses.common.DXE_RUNTIME_DRIVER]
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 10/42] UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC exception
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (8 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 09/42] UefiPayloadPkg: Prepare UefiPayloadPkg " Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 11/42] UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE events Lendacky, Thomas
` (32 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh, Maurice Ma,
Guo Dong, Benjamin You
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Add base support to handle #VC exceptions. This includes a stub routine
to invoke when a #VC exception occurs and special checks in the common
exception handlers to invoke the #VC exception handler routine.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../DxeCpuExceptionHandlerLib.inf | 5 ++
.../PeiCpuExceptionHandlerLib.inf | 5 ++
.../SecPeiCpuExceptionHandlerLib.inf | 5 ++
.../SmmCpuExceptionHandlerLib.inf | 5 ++
.../CpuExceptionHandlerLib/AMDSevVcCommon.h | 26 ++++++++++
.../CpuExceptionCommon.h | 2 +
.../CpuExceptionHandlerLib/AMDSevVcHandler.c | 29 +++++++++++
.../CpuExceptionCommon.c | 2 +-
.../Ia32/ArchAMDSevVcHandler.c | 24 +++++++++
.../PeiDxeSmmCpuException.c | 16 ++++++
.../SecPeiCpuException.c | 16 ++++++
.../X64/ArchAMDSevVcHandler.c | 50 +++++++++++++++++++
12 files changed, 184 insertions(+), 1 deletion(-)
create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcCommon.h
create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcHandler.c
create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/Ia32/ArchAMDSevVcHandler.c
create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf b/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
index e41383573043..4d79c4910b18 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf
@@ -26,17 +26,21 @@ [Sources.Ia32]
Ia32/ExceptionTssEntryAsm.nasm
Ia32/ArchExceptionHandler.c
Ia32/ArchInterruptDefs.h
+ Ia32/ArchAMDSevVcHandler.c
[Sources.X64]
X64/ExceptionHandlerAsm.nasm
X64/ArchExceptionHandler.c
X64/ArchInterruptDefs.h
+ X64/ArchAMDSevVcHandler.c
[Sources.common]
CpuExceptionCommon.h
CpuExceptionCommon.c
PeiDxeSmmCpuException.c
DxeException.c
+ AMDSevVcHandler.c
+ AMDSevVcCommon.h
[Pcd]
gEfiMdeModulePkgTokenSpaceGuid.PcdCpuStackGuard
@@ -57,3 +61,4 @@ [LibraryClasses]
PeCoffGetEntryPointLib
MemoryAllocationLib
DebugLib
+ VmgExitLib
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/PeiCpuExceptionHandlerLib.inf b/UefiCpuPkg/Library/CpuExceptionHandlerLib/PeiCpuExceptionHandlerLib.inf
index f31423ac0f91..e8445e47eaa3 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/PeiCpuExceptionHandlerLib.inf
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/PeiCpuExceptionHandlerLib.inf
@@ -26,17 +26,21 @@ [Sources.Ia32]
Ia32/ExceptionTssEntryAsm.nasm
Ia32/ArchExceptionHandler.c
Ia32/ArchInterruptDefs.h
+ Ia32/ArchAMDSevVcHandler.c
[Sources.X64]
X64/ExceptionHandlerAsm.nasm
X64/ArchExceptionHandler.c
X64/ArchInterruptDefs.h
+ X64/ArchAMDSevVcHandler.c
[Sources.common]
CpuExceptionCommon.h
CpuExceptionCommon.c
PeiCpuException.c
PeiDxeSmmCpuException.c
+ AMDSevVcHandler.c
+ AMDSevVcCommon.h
[Packages]
MdePkg/MdePkg.dec
@@ -52,6 +56,7 @@ [LibraryClasses]
HobLib
MemoryAllocationLib
SynchronizationLib
+ VmgExitLib
[Pcd]
gEfiMdeModulePkgTokenSpaceGuid.PcdCpuStackGuard # CONSUMES
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf b/UefiCpuPkg/Library/CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf
index 6d25cafe2ca3..a15bf71b4052 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/SecPeiCpuExceptionHandlerLib.inf
@@ -26,16 +26,20 @@ [Sources.Ia32]
Ia32/ExceptionTssEntryAsm.nasm
Ia32/ArchExceptionHandler.c
Ia32/ArchInterruptDefs.h
+ Ia32/ArchAMDSevVcHandler.c
[Sources.X64]
X64/ExceptionHandlerAsm.nasm
X64/ArchExceptionHandler.c
X64/ArchInterruptDefs.h
+ X64/ArchAMDSevVcHandler.c
[Sources.common]
CpuExceptionCommon.h
CpuExceptionCommon.c
SecPeiCpuException.c
+ AMDSevVcHandler.c
+ AMDSevVcCommon.h
[Packages]
MdePkg/MdePkg.dec
@@ -48,3 +52,4 @@ [LibraryClasses]
PrintLib
LocalApicLib
PeCoffGetEntryPointLib
+ VmgExitLib
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/SmmCpuExceptionHandlerLib.inf b/UefiCpuPkg/Library/CpuExceptionHandlerLib/SmmCpuExceptionHandlerLib.inf
index 66c7f59e3c91..190d7dfcd42a 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/SmmCpuExceptionHandlerLib.inf
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/SmmCpuExceptionHandlerLib.inf
@@ -26,17 +26,21 @@ [Sources.Ia32]
Ia32/ExceptionTssEntryAsm.nasm
Ia32/ArchExceptionHandler.c
Ia32/ArchInterruptDefs.h
+ Ia32/ArchAMDSevVcHandler.c
[Sources.X64]
X64/ExceptionHandlerAsm.nasm
X64/ArchExceptionHandler.c
X64/ArchInterruptDefs.h
+ X64/ArchAMDSevVcHandler.c
[Sources.common]
CpuExceptionCommon.h
CpuExceptionCommon.c
PeiDxeSmmCpuException.c
SmmException.c
+ AMDSevVcHandler.c
+ AMDSevVcCommon.h
[Packages]
MdePkg/MdePkg.dec
@@ -51,4 +55,5 @@ [LibraryClasses]
LocalApicLib
PeCoffGetEntryPointLib
DebugLib
+ VmgExitLib
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcCommon.h b/UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcCommon.h
new file mode 100644
index 000000000000..f8af23844e75
--- /dev/null
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcCommon.h
@@ -0,0 +1,26 @@
+/** @file
+ Common header file for SEV-ES #VC Exception Handler Support.
+
+ Copyright (c) 2020, Advanced Micro Devices, Inc. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef _AMD_SEV_VC_COMMON_H_
+#define _AMD_SEV_VC_COMMON_H_
+
+#include <Protocol/DebugSupport.h>
+#include <Register/Amd/Ghcb.h>
+
+UINTN
+DoVcException (
+ EFI_SYSTEM_CONTEXT Context
+ );
+
+UINTN
+DoVcCommon (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT Context
+ );
+
+#endif
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.h b/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.h
index 805dd9cbb4ff..0f274e7ea328 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.h
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.h
@@ -24,6 +24,8 @@
#define CPU_INTERRUPT_NUM 256
#define HOOKAFTER_STUB_SIZE 16
+#define VC_EXCEPTION 29
+
//
// Exception Error Code of Page-Fault Exception
//
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcHandler.c
new file mode 100644
index 000000000000..e6fbbb621977
--- /dev/null
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcHandler.c
@@ -0,0 +1,29 @@
+/** @file
+ SEV-ES #VC Exception Handler functon.
+
+ Copyright (c) 2020, Advanced Micro Devices, Inc. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/BaseLib.h>
+#include <Register/Amd/Msr.h>
+#include "CpuExceptionCommon.h"
+#include "AMDSevVcCommon.h"
+
+UINTN
+DoVcException (
+ EFI_SYSTEM_CONTEXT Context
+ )
+{
+ MSR_SEV_ES_GHCB_REGISTER Msr;
+ GHCB *Ghcb;
+
+ Msr.GhcbPhysicalAddress = AsmReadMsr64 (MSR_SEV_ES_GHCB);
+ ASSERT (Msr.GhcbInfo.Function == 0);
+ ASSERT (Msr.Ghcb != 0);
+
+ Ghcb = Msr.Ghcb;
+
+ return DoVcCommon (Ghcb, Context);
+}
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.c
index 8adbd43fefb4..39e4dd9e9417 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/CpuExceptionCommon.c
@@ -14,7 +14,7 @@
//
// 1 means an error code will be pushed, otherwise 0
//
-CONST UINT32 mErrorCodeFlag = 0x00227d00;
+CONST UINT32 mErrorCodeFlag = 0x20227d00;
//
// Define the maximum message length
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/Ia32/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/Ia32/ArchAMDSevVcHandler.c
new file mode 100644
index 000000000000..bb00316e5cfb
--- /dev/null
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/Ia32/ArchAMDSevVcHandler.c
@@ -0,0 +1,24 @@
+/** @file
+ IA32 SEV-ES #VC Exception Handler functons.
+
+ Copyright (c) 2020, Advanced Micro Devices, Inc. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include "AMDSevVcCommon.h"
+
+UINTN
+DoVcCommon (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT Context
+ )
+{
+ EFI_SYSTEM_CONTEXT_IA32 *Regs = Context.SystemContextIa32;
+
+ Regs->ExceptionData = 0;
+
+ return GP_EXCEPTION;
+}
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/PeiDxeSmmCpuException.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/PeiDxeSmmCpuException.c
index 6a2670d55918..d565db547808 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/PeiDxeSmmCpuException.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/PeiDxeSmmCpuException.c
@@ -7,6 +7,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#include "CpuExceptionCommon.h"
+#include "AMDSevVcCommon.h"
#include <Library/DebugLib.h>
/**
@@ -86,6 +87,21 @@ CommonExceptionHandlerWorker (
break;
}
+ if (ExceptionType == VC_EXCEPTION) {
+ UINTN Status;
+ //
+ // #VC must be handled for an SEV-ES guest
+ //
+ Status = DoVcException (SystemContext);
+ if (Status) {
+ // Exception not handled - Status contains the desired exception now
+ ExceptionType = Status;
+ } else {
+ // Exception handled
+ return;
+ }
+ }
+
if (ExternalInterruptHandler != NULL &&
ExternalInterruptHandler[ExceptionType] != NULL) {
(ExternalInterruptHandler[ExceptionType]) (ExceptionType, SystemContext);
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/SecPeiCpuException.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/SecPeiCpuException.c
index 20148db74cf8..0716680d2f50 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/SecPeiCpuException.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/SecPeiCpuException.c
@@ -8,6 +8,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
#include <PiPei.h>
#include "CpuExceptionCommon.h"
+#include "AMDSevVcCommon.h"
CONST UINTN mDoFarReturnFlag = 0;
@@ -24,6 +25,21 @@ CommonExceptionHandler (
IN EFI_SYSTEM_CONTEXT SystemContext
)
{
+ if (ExceptionType == VC_EXCEPTION) {
+ UINTN Status;
+ //
+ // #VC must be handled for an SEV-ES guest
+ //
+ Status = DoVcException (SystemContext);
+ if (Status) {
+ // Exception not handled - Status contains the desired exception now
+ ExceptionType = Status;
+ } else {
+ // Exception handled
+ return;
+ }
+ }
+
//
// Initialize the serial port before dumping.
//
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
new file mode 100644
index 000000000000..7cbf89d9b1aa
--- /dev/null
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -0,0 +1,50 @@
+/** @file
+ X64 SEV-ES #VC Exception Handler functons.
+
+ Copyright (c) 2020, Advanced Micro Devices, Inc. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/VmgExitLib.h>
+#include "AMDSevVcCommon.h"
+
+UINTN
+DoVcCommon (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT Context
+ )
+{
+ EFI_SYSTEM_CONTEXT_X64 *Regs = Context.SystemContextX64;
+ UINT64 Status;
+ UINTN ExitCode, VcRet;
+
+ VmgInit (Ghcb);
+
+ ExitCode = Regs->ExceptionData;
+ switch (ExitCode) {
+ default:
+ Status = VmgExit (Ghcb, SvmExitUnsupported, ExitCode, 0);
+ if (Status == 0) {
+ Regs->ExceptionData = 0;
+ VcRet = GP_EXCEPTION;
+ } else {
+ GHCB_EVENT_INJECTION Event;
+
+ Event.Uint64 = Status;
+ if (Event.Elements.ErrorCodeValid) {
+ Regs->ExceptionData = Event.Elements.ErrorCode;
+ } else {
+ Regs->ExceptionData = 0;
+ }
+
+ VcRet = Event.Elements.Vector;
+ }
+ }
+
+ VmgDone (Ghcb);
+
+ return VcRet;
+}
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 11/42] UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE events
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (9 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 10/42] UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC exception Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 12/42] UefiCpuPkg/CpuExceptionHandler: Support string IO " Lendacky, Thomas
` (31 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a IOIO_PROT intercept generates a #VC exception. VMGEXIT
must be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a IOIO_PROT
NAE event. Parse the instruction that generated the #VC exception,
setting the required register values in the GHCB and creating the proper
SW_EXITINFO1 value in the GHCB.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../X64/ArchAMDSevVcHandler.c | 463 +++++++++++++++++-
1 file changed, 449 insertions(+), 14 deletions(-)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
index 7cbf89d9b1aa..577dacfb7ca5 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -11,6 +11,431 @@
#include <Library/VmgExitLib.h>
#include "AMDSevVcCommon.h"
+typedef enum {
+ LongMode64Bit = 0,
+ LongModeCompat32Bit,
+ LongModeCompat16Bit,
+} SEV_ES_INSTRUCTION_MODE;
+
+typedef enum {
+ Size8Bits = 0,
+ Size16Bits,
+ Size32Bits,
+ Size64Bits,
+} SEV_ES_INSTRUCTION_SIZE;
+
+typedef enum {
+ SegmentEs = 0,
+ SegmentCs,
+ SegmentSs,
+ SegmentDs,
+ SegmentFs,
+ SegmentGs,
+} SEV_ES_INSTRUCTION_SEGMENT;
+
+typedef enum {
+ RepNone = 0,
+ RepZ,
+ RepNZ,
+} SEV_ES_INSTRUCTION_REP;
+
+typedef union {
+ struct {
+ UINT8 B:1;
+ UINT8 X:1;
+ UINT8 R:1;
+ UINT8 W:1;
+ UINT8 REX:4;
+ } Bits;
+
+ UINT8 Uint8;
+} SEV_ES_INSTRUCTION_REX_PREFIX;
+
+typedef union {
+ struct {
+ UINT8 Rm:3;
+ UINT8 Reg:3;
+ UINT8 Mod:2;
+ } Bits;
+
+ UINT8 Uint8;
+} SEV_ES_INSTRUCTION_MODRM;
+
+typedef union {
+ struct {
+ UINT8 Base:3;
+ UINT8 Index:3;
+ UINT8 Scale:2;
+ } Bits;
+
+ UINT8 Uint8;
+} SEV_ES_INSTRUCTION_SIB;
+
+typedef struct {
+ struct {
+ UINT8 Rm;
+ UINT8 Reg;
+ UINT8 Mod;
+ } ModRm;
+
+ struct {
+ UINT8 Base;
+ UINT8 Index;
+ UINT8 Scale;
+ } Sib;
+
+ UINTN RegData;
+ UINTN RmData;
+} SEV_ES_INSTRUCTION_OPCODE_EXT;
+
+typedef struct {
+ GHCB *Ghcb;
+
+ SEV_ES_INSTRUCTION_MODE Mode;
+ SEV_ES_INSTRUCTION_SIZE DataSize;
+ SEV_ES_INSTRUCTION_SIZE AddrSize;
+ BOOLEAN SegmentSpecified;
+ SEV_ES_INSTRUCTION_SEGMENT Segment;
+ SEV_ES_INSTRUCTION_REP RepMode;
+
+ UINT8 *Begin;
+ UINT8 *End;
+
+ UINT8 *Prefixes;
+ UINT8 *OpCodes;
+ UINT8 *Displacement;
+ UINT8 *Immediate;
+
+ SEV_ES_INSTRUCTION_REX_PREFIX RexPrefix;
+
+ BOOLEAN ModRmPresent;
+ SEV_ES_INSTRUCTION_MODRM ModRm;
+
+ BOOLEAN SibPresent;
+ SEV_ES_INSTRUCTION_SIB Sib;
+
+ UINT8 PrefixSize;
+ UINT8 OpCodeSize;
+ UINT8 DisplacementSize;
+ UINT8 ImmediateSize;
+
+ SEV_ES_INSTRUCTION_OPCODE_EXT Ext;
+} SEV_ES_INSTRUCTION_DATA;
+
+typedef
+UINT64
+(*NAE_EXIT) (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ );
+
+
+STATIC
+BOOLEAN
+GhcbIsRegValid (
+ GHCB *Ghcb,
+ GHCB_REGISTER Reg
+ )
+{
+ UINT32 RegIndex = Reg / 8;
+ UINT32 RegBit = Reg & 0x07;
+
+ return (Ghcb->SaveArea.ValidBitmap[RegIndex] & (1 << RegBit));
+}
+
+STATIC
+VOID
+GhcbSetRegValid (
+ GHCB *Ghcb,
+ GHCB_REGISTER Reg
+ )
+{
+ UINT32 RegIndex = Reg / 8;
+ UINT32 RegBit = Reg & 0x07;
+
+ Ghcb->SaveArea.ValidBitmap[RegIndex] |= (1 << RegBit);
+}
+
+STATIC
+VOID
+DecodePrefixes (
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ SEV_ES_INSTRUCTION_MODE Mode;
+ SEV_ES_INSTRUCTION_SIZE ModeDataSize;
+ SEV_ES_INSTRUCTION_SIZE ModeAddrSize;
+ UINT8 *Byte;
+
+ /*TODO: Determine current mode - 64-bit for now */
+ Mode = LongMode64Bit;
+ ModeDataSize = Size32Bits;
+ ModeAddrSize = Size64Bits;
+
+ InstructionData->Mode = Mode;
+ InstructionData->DataSize = ModeDataSize;
+ InstructionData->AddrSize = ModeAddrSize;
+
+ InstructionData->Prefixes = InstructionData->Begin;
+
+ Byte = InstructionData->Prefixes;
+ for ( ; ; Byte++, InstructionData->PrefixSize++) {
+ switch (*Byte) {
+ case 0x26:
+ case 0x2E:
+ case 0x36:
+ case 0x3E:
+ if (Mode != LongMode64Bit) {
+ InstructionData->SegmentSpecified = TRUE;
+ InstructionData->Segment = (*Byte >> 3) & 3;
+ }
+ break;
+
+ case 0x40 ... 0x4F:
+ InstructionData->RexPrefix.Uint8 = *Byte;
+ if (*Byte & 0x08)
+ InstructionData->DataSize = Size64Bits;
+ break;
+
+ case 0x64:
+ InstructionData->SegmentSpecified = TRUE;
+ InstructionData->Segment = *Byte & 7;
+ break;
+
+ case 0x66:
+ if (!InstructionData->RexPrefix.Uint8) {
+ InstructionData->DataSize =
+ (Mode == LongMode64Bit) ? Size16Bits :
+ (Mode == LongModeCompat32Bit) ? Size16Bits :
+ (Mode == LongModeCompat16Bit) ? Size32Bits : 0;
+ }
+ break;
+
+ case 0x67:
+ InstructionData->AddrSize =
+ (Mode == LongMode64Bit) ? Size32Bits :
+ (Mode == LongModeCompat32Bit) ? Size16Bits :
+ (Mode == LongModeCompat16Bit) ? Size32Bits : 0;
+ break;
+
+ case 0xF0:
+ break;
+
+ case 0xF2:
+ InstructionData->RepMode = RepZ;
+ break;
+
+ case 0xF3:
+ InstructionData->RepMode = RepNZ;
+ break;
+
+ default:
+ InstructionData->OpCodes = Byte;
+ InstructionData->OpCodeSize = (*Byte == 0x0F) ? 2 : 1;
+
+ InstructionData->End = Byte + InstructionData->OpCodeSize;
+ InstructionData->Displacement = InstructionData->End;
+ InstructionData->Immediate = InstructionData->End;
+ return;
+ }
+ }
+}
+
+UINT64
+InstructionLength (
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ return (UINT64) (InstructionData->End - InstructionData->Begin);
+}
+
+STATIC
+VOID
+InitInstructionData (
+ SEV_ES_INSTRUCTION_DATA *InstructionData,
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs
+ )
+{
+ SetMem (InstructionData, sizeof (*InstructionData), 0);
+ InstructionData->Ghcb = Ghcb;
+ InstructionData->Begin = (UINT8 *) Regs->Rip;
+ InstructionData->End = (UINT8 *) Regs->Rip;
+
+ DecodePrefixes (Regs, InstructionData);
+}
+
+STATIC
+UINT64
+UnsupportedExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ UINT64 Status;
+
+ Status = VmgExit (Ghcb, SvmExitUnsupported, Regs->ExceptionData, 0);
+ if (Status == 0) {
+ GHCB_EVENT_INJECTION Event;
+
+ Event.Uint64 = 0;
+ Event.Elements.Vector = GP_EXCEPTION;
+ Event.Elements.Type = GHCB_EVENT_INJECTION_TYPE_EXCEPTION;
+ Event.Elements.Valid = 1;
+
+ Status = Event.Uint64;
+ }
+
+ return Status;
+}
+
+#define IOIO_TYPE_STR (1 << 2)
+#define IOIO_TYPE_IN 1
+#define IOIO_TYPE_INS (IOIO_TYPE_IN | IOIO_TYPE_STR)
+#define IOIO_TYPE_OUT 0
+#define IOIO_TYPE_OUTS (IOIO_TYPE_OUT | IOIO_TYPE_STR)
+
+#define IOIO_REP (1 << 3)
+
+#define IOIO_ADDR_64 (1 << 9)
+#define IOIO_ADDR_32 (1 << 8)
+#define IOIO_ADDR_16 (1 << 7)
+
+#define IOIO_DATA_32 (1 << 6)
+#define IOIO_DATA_16 (1 << 5)
+#define IOIO_DATA_8 (1 << 4)
+
+#define IOIO_SEG_ES (0 << 10)
+#define IOIO_SEG_DS (3 << 10)
+
+STATIC
+UINT64
+IoioExitInfo (
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ UINT64 ExitInfo = 0;
+
+ switch (*(InstructionData->OpCodes)) {
+ // IN immediate opcodes
+ case 0xE4:
+ case 0xE5:
+ InstructionData->ImmediateSize = 1;
+ InstructionData->End++;
+ ExitInfo |= IOIO_TYPE_IN;
+ ExitInfo |= ((*(InstructionData->OpCodes + 1)) << 16);
+ break;
+
+ // OUT immediate opcodes
+ case 0xE6:
+ case 0xE7:
+ InstructionData->ImmediateSize = 1;
+ InstructionData->End++;
+ ExitInfo |= IOIO_TYPE_OUT;
+ ExitInfo |= ((*(InstructionData->OpCodes + 1)) << 16) | IOIO_TYPE_OUT;
+ break;
+
+ // IN register opcodes
+ case 0xEC:
+ case 0xED:
+ ExitInfo |= IOIO_TYPE_IN;
+ ExitInfo |= ((Regs->Rdx & 0xffff) << 16);
+ break;
+
+ // OUT register opcodes
+ case 0xEE:
+ case 0xEF:
+ ExitInfo |= IOIO_TYPE_OUT;
+ ExitInfo |= ((Regs->Rdx & 0xffff) << 16);
+ break;
+
+ default:
+ return 0;
+ }
+
+ switch (*(InstructionData->OpCodes)) {
+ case 0xE4:
+ case 0xE6:
+ case 0xEC:
+ case 0xEE:
+ // Single-byte opcodes
+ ExitInfo |= IOIO_DATA_8;
+ break;
+
+ default:
+ // Length determined by instruction parsing
+ ExitInfo |= (InstructionData->DataSize == Size16Bits) ? IOIO_DATA_16
+ : IOIO_DATA_32;
+ }
+
+ switch (InstructionData->AddrSize) {
+ case Size16Bits:
+ ExitInfo |= IOIO_ADDR_16;
+ break;
+
+ case Size32Bits:
+ ExitInfo |= IOIO_ADDR_32;
+ break;
+
+ case Size64Bits:
+ ExitInfo |= IOIO_ADDR_64;
+ break;
+
+ default:
+ break;
+ }
+
+ if (InstructionData->RepMode) {
+ ExitInfo |= IOIO_REP;
+ }
+
+ return ExitInfo;
+}
+
+STATIC
+UINT64
+IoioExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ UINT64 ExitInfo1, Status;
+
+ ExitInfo1 = IoioExitInfo (Regs, InstructionData);
+ if (!ExitInfo1) {
+ return UnsupportedExit (Ghcb, Regs, InstructionData);
+ }
+
+ if (!(ExitInfo1 & IOIO_TYPE_IN)) {
+ Ghcb->SaveArea.Rax = Regs->Rax;
+ GhcbSetRegValid (Ghcb, GhcbRax);
+ }
+
+ //FIXME: This is likely needed for the merging cases (size<32 bits)
+ // Pass in zero and perform merge here (only for non-string)
+ Ghcb->SaveArea.Rax = Regs->Rax;
+ GhcbSetRegValid (Ghcb, GhcbRax);
+
+ Status = VmgExit (Ghcb, SvmExitIoioProt, ExitInfo1, 0);
+ if (Status) {
+ return Status;
+ }
+
+ if (ExitInfo1 & IOIO_TYPE_IN) {
+ if (!GhcbIsRegValid (Ghcb, GhcbRax)) {
+ return UnsupportedExit (Ghcb, Regs, InstructionData);
+ }
+ Regs->Rax = Ghcb->SaveArea.Rax;
+ }
+
+ return 0;
+}
+
UINTN
DoVcCommon (
GHCB *Ghcb,
@@ -18,6 +443,8 @@ DoVcCommon (
)
{
EFI_SYSTEM_CONTEXT_X64 *Regs = Context.SystemContextX64;
+ SEV_ES_INSTRUCTION_DATA InstructionData;
+ NAE_EXIT NaeExit;
UINT64 Status;
UINTN ExitCode, VcRet;
@@ -25,23 +452,31 @@ DoVcCommon (
ExitCode = Regs->ExceptionData;
switch (ExitCode) {
+ case SvmExitIoioProt:
+ NaeExit = IoioExit;
+ break;
+
default:
- Status = VmgExit (Ghcb, SvmExitUnsupported, ExitCode, 0);
- if (Status == 0) {
- Regs->ExceptionData = 0;
- VcRet = GP_EXCEPTION;
+ NaeExit = UnsupportedExit;
+ }
+
+ InitInstructionData (&InstructionData, Ghcb, Regs);
+
+ Status = NaeExit (Ghcb, Regs, &InstructionData);
+ if (Status == 0) {
+ Regs->Rip += InstructionLength (&InstructionData);
+ VcRet = 0;
+ } else {
+ GHCB_EVENT_INJECTION Event;
+
+ Event.Uint64 = Status;
+ if (Event.Elements.ErrorCodeValid) {
+ Regs->ExceptionData = Event.Elements.ErrorCode;
} else {
- GHCB_EVENT_INJECTION Event;
-
- Event.Uint64 = Status;
- if (Event.Elements.ErrorCodeValid) {
- Regs->ExceptionData = Event.Elements.ErrorCode;
- } else {
- Regs->ExceptionData = 0;
- }
-
- VcRet = Event.Elements.Vector;
+ Regs->ExceptionData = 0;
}
+
+ VcRet = Event.Elements.Vector;
}
VmgDone (Ghcb);
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 12/42] UefiCpuPkg/CpuExceptionHandler: Support string IO for IOIO_PROT NAE events
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (10 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 11/42] UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE events Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 13/42] UefiCpuPkg/CpuExceptionHandler: Add support for CPUID " Lendacky, Thomas
` (30 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Add support to the #VC exception handler to handle string IO. This
requires expanding the IO instruction parsing to recognize string based
IO instructions as well as preparing an un-encrypted buffer to be used
to transfer (either to or from the guest) the string contents for the IO
operation. The SW_EXITINFO2 and SW_SCRATCH fields of the GHCB are set
appropriately for the operation. Multiple VMGEXIT invocations may be
needed to complete the string IO operation.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../X64/ArchAMDSevVcHandler.c | 78 ++++++++++++++++---
1 file changed, 68 insertions(+), 10 deletions(-)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
index 577dacfb7ca5..24f746f994ca 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -321,6 +321,22 @@ IoioExitInfo (
UINT64 ExitInfo = 0;
switch (*(InstructionData->OpCodes)) {
+ // INS opcodes
+ case 0x6C:
+ case 0x6D:
+ ExitInfo |= IOIO_TYPE_INS;
+ ExitInfo |= IOIO_SEG_ES;
+ ExitInfo |= ((Regs->Rdx & 0xffff) << 16);
+ break;
+
+ // OUTS opcodes
+ case 0x6E:
+ case 0x6F:
+ ExitInfo |= IOIO_TYPE_OUTS;
+ ExitInfo |= IOIO_SEG_DS;
+ ExitInfo |= ((Regs->Rdx & 0xffff) << 16);
+ break;
+
// IN immediate opcodes
case 0xE4:
case 0xE5:
@@ -358,6 +374,8 @@ IoioExitInfo (
}
switch (*(InstructionData->OpCodes)) {
+ case 0x6C:
+ case 0x6E:
case 0xE4:
case 0xE6:
case 0xEC:
@@ -404,7 +422,8 @@ IoioExit (
SEV_ES_INSTRUCTION_DATA *InstructionData
)
{
- UINT64 ExitInfo1, Status;
+ UINT64 ExitInfo1, ExitInfo2, Status;
+ BOOLEAN String;
ExitInfo1 = IoioExitInfo (Regs, InstructionData);
if (!ExitInfo1) {
@@ -421,16 +440,55 @@ IoioExit (
Ghcb->SaveArea.Rax = Regs->Rax;
GhcbSetRegValid (Ghcb, GhcbRax);
- Status = VmgExit (Ghcb, SvmExitIoioProt, ExitInfo1, 0);
- if (Status) {
- return Status;
- }
-
- if (ExitInfo1 & IOIO_TYPE_IN) {
- if (!GhcbIsRegValid (Ghcb, GhcbRax)) {
- return UnsupportedExit (Ghcb, Regs, InstructionData);
+ String = (ExitInfo1 & IOIO_TYPE_STR) ? TRUE : FALSE;
+ if (String) {
+ UINTN IoBytes, VmgExitBytes;
+ UINTN GhcbCount, OpCount;
+
+ Status = 0;
+
+ IoBytes = (ExitInfo1 >> 4) & 0x7;
+ GhcbCount = sizeof (Ghcb->SharedBuffer) / IoBytes;
+
+ OpCount = (ExitInfo1 & IOIO_REP) ? Regs->Rcx : 1;
+ while (OpCount) {
+ ExitInfo2 = MIN (OpCount, GhcbCount);
+ VmgExitBytes = ExitInfo2 * IoBytes;
+
+ if (!(ExitInfo1 & IOIO_TYPE_IN)) {
+ CopyMem (Ghcb->SharedBuffer, (VOID *) Regs->Rsi, VmgExitBytes);
+ Regs->Rsi += VmgExitBytes;
+ }
+
+ Ghcb->SaveArea.SwScratch = (UINT64) Ghcb->SharedBuffer;
+ Status = VmgExit (Ghcb, SvmExitIoioProt, ExitInfo1, ExitInfo2);
+ if (Status) {
+ return Status;
+ }
+
+ if (ExitInfo1 & IOIO_TYPE_IN) {
+ CopyMem ((VOID *) Regs->Rdi, Ghcb->SharedBuffer, VmgExitBytes);
+ Regs->Rdi += VmgExitBytes;
+ }
+
+ if (ExitInfo1 & IOIO_REP) {
+ Regs->Rcx -= ExitInfo2;
+ }
+
+ OpCount -= ExitInfo2;
+ }
+ } else {
+ Status = VmgExit (Ghcb, SvmExitIoioProt, ExitInfo1, 0);
+ if (Status) {
+ return Status;
+ }
+
+ if (ExitInfo1 & IOIO_TYPE_IN) {
+ if (!GhcbIsRegValid (Ghcb, GhcbRax)) {
+ return UnsupportedExit (Ghcb, Regs, InstructionData);
+ }
+ Regs->Rax = Ghcb->SaveArea.Rax;
}
- Regs->Rax = Ghcb->SaveArea.Rax;
}
return 0;
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 13/42] UefiCpuPkg/CpuExceptionHandler: Add support for CPUID NAE events
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (11 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 12/42] UefiCpuPkg/CpuExceptionHandler: Support string IO " Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 14/42] UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT " Lendacky, Thomas
` (29 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a CPUID intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a CPUID NAE
event. Additionally, CPUID 0x0000_000d requires XCR0 to be supplied in
the GHCB, so add support to issue the XGETBV instruction.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../X64/ArchAMDSevVcHandler.c | 44 +++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
index 24f746f994ca..d57444b50719 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -11,6 +11,8 @@
#include <Library/VmgExitLib.h>
#include "AMDSevVcCommon.h"
+#define CR4_OSXSAVE (1 << 18)
+
typedef enum {
LongMode64Bit = 0,
LongModeCompat32Bit,
@@ -494,6 +496,44 @@ IoioExit (
return 0;
}
+STATIC
+UINT64
+CpuidExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ UINT64 Status;
+
+ Ghcb->SaveArea.Rax = Regs->Rax;
+ GhcbSetRegValid (Ghcb, GhcbRax);
+ Ghcb->SaveArea.Rcx = Regs->Rcx;
+ GhcbSetRegValid (Ghcb, GhcbRcx);
+ if (Regs->Rax == 0x0000000d) {
+ Ghcb->SaveArea.XCr0 = (AsmReadCr4 () & CR4_OSXSAVE) ? AsmXGetBv (0) : 1;
+ GhcbSetRegValid (Ghcb, GhcbXCr0);
+ }
+
+ Status = VmgExit (Ghcb, SvmExitCpuid, 0, 0);
+ if (Status) {
+ return Status;
+ }
+
+ if (!GhcbIsRegValid (Ghcb, GhcbRax) ||
+ !GhcbIsRegValid (Ghcb, GhcbRbx) ||
+ !GhcbIsRegValid (Ghcb, GhcbRcx) ||
+ !GhcbIsRegValid (Ghcb, GhcbRdx)) {
+ return UnsupportedExit (Ghcb, Regs, InstructionData);
+ }
+ Regs->Rax = Ghcb->SaveArea.Rax;
+ Regs->Rbx = Ghcb->SaveArea.Rbx;
+ Regs->Rcx = Ghcb->SaveArea.Rcx;
+ Regs->Rdx = Ghcb->SaveArea.Rdx;
+
+ return 0;
+}
+
UINTN
DoVcCommon (
GHCB *Ghcb,
@@ -510,6 +550,10 @@ DoVcCommon (
ExitCode = Regs->ExceptionData;
switch (ExitCode) {
+ case SvmExitCpuid:
+ NaeExit = CpuidExit;
+ break;
+
case SvmExitIoioProt:
NaeExit = IoioExit;
break;
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 14/42] UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT NAE events
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (12 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 13/42] UefiCpuPkg/CpuExceptionHandler: Add support for CPUID " Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 15/42] UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE events (MMIO) Lendacky, Thomas
` (28 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a MSR_PROT intercept generates a #VC exception. VMGEXIT must
be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support an MSR_PROT
NAE event. Parse the instruction that generated the #VC exception to
determine whether it is RDMSR or WRMSR, setting the required register
register values in the GHCB and creating the proper SW_EXIT_INFO1 value in
the GHCB.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../X64/ArchAMDSevVcHandler.c | 49 +++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
index d57444b50719..26de6304a176 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -294,6 +294,51 @@ UnsupportedExit (
return Status;
}
+STATIC
+UINT64
+MsrExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ UINT64 ExitInfo1, Status;
+
+ ExitInfo1 = 0;
+
+ switch (*(InstructionData->OpCodes + 1)) {
+ case 0x30: // WRMSR
+ ExitInfo1 = 1;
+ Ghcb->SaveArea.Rax = Regs->Rax;
+ GhcbSetRegValid (Ghcb, GhcbRax);
+ Ghcb->SaveArea.Rdx = Regs->Rdx;
+ GhcbSetRegValid (Ghcb, GhcbRdx);
+ /* Fallthrough */
+ case 0x32: // RDMSR
+ Ghcb->SaveArea.Rcx = Regs->Rcx;
+ GhcbSetRegValid (Ghcb, GhcbRcx);
+ break;
+ default:
+ return UnsupportedExit (Ghcb, Regs, InstructionData);
+ }
+
+ Status = VmgExit (Ghcb, SvmExitMsr, ExitInfo1, 0);
+ if (Status) {
+ return Status;
+ }
+
+ if (!ExitInfo1) {
+ if (!GhcbIsRegValid (Ghcb, GhcbRax) ||
+ !GhcbIsRegValid (Ghcb, GhcbRdx)) {
+ return UnsupportedExit (Ghcb, Regs, InstructionData);
+ }
+ Regs->Rax = Ghcb->SaveArea.Rax;
+ Regs->Rdx = Ghcb->SaveArea.Rdx;
+ }
+
+ return 0;
+}
+
#define IOIO_TYPE_STR (1 << 2)
#define IOIO_TYPE_IN 1
#define IOIO_TYPE_INS (IOIO_TYPE_IN | IOIO_TYPE_STR)
@@ -558,6 +603,10 @@ DoVcCommon (
NaeExit = IoioExit;
break;
+ case SvmExitMsr:
+ NaeExit = MsrExit;
+ break;
+
default:
NaeExit = UnsupportedExit;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 15/42] UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE events (MMIO)
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (13 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 14/42] UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT " Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 16/42] UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE events Lendacky, Thomas
` (27 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a NPF intercept for an NPT entry with a reserved bit set
generates a #VC exception. This condition is assumed to be an MMIO access.
VMGEXIT must be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a NPF NAE
event for MMIO. Parse the instruction that generated the #VC exception,
setting the required register values in the GHCB and creating the proper
SW_EXIT_INFO1, SW_EXITINFO2 and SW_SCRATCH values in the GHCB.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../X64/ArchAMDSevVcHandler.c | 305 +++++++++++++++++-
1 file changed, 303 insertions(+), 2 deletions(-)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
index 26de6304a176..3cac613c8889 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -86,8 +86,8 @@ typedef struct {
UINT8 Scale;
} Sib;
- UINTN RegData;
- UINTN RmData;
+ INTN RegData;
+ INTN RmData;
} SEV_ES_INSTRUCTION_OPCODE_EXT;
typedef struct {
@@ -159,6 +159,198 @@ GhcbSetRegValid (
Ghcb->SaveArea.ValidBitmap[RegIndex] |= (1 << RegBit);
}
+STATIC
+INT64 *
+GetRegisterPointer (
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ UINT8 Register
+ )
+{
+ UINT64 *Reg;
+
+ switch (Register) {
+ case 0:
+ Reg = &Regs->Rax;
+ break;
+ case 1:
+ Reg = &Regs->Rcx;
+ break;
+ case 2:
+ Reg = &Regs->Rdx;
+ break;
+ case 3:
+ Reg = &Regs->Rbx;
+ break;
+ case 4:
+ Reg = &Regs->Rsp;
+ break;
+ case 5:
+ Reg = &Regs->Rbp;
+ break;
+ case 6:
+ Reg = &Regs->Rsi;
+ break;
+ case 7:
+ Reg = &Regs->Rdi;
+ break;
+ case 8:
+ Reg = &Regs->R8;
+ break;
+ case 9:
+ Reg = &Regs->R9;
+ break;
+ case 10:
+ Reg = &Regs->R10;
+ break;
+ case 11:
+ Reg = &Regs->R11;
+ break;
+ case 12:
+ Reg = &Regs->R12;
+ break;
+ case 13:
+ Reg = &Regs->R13;
+ break;
+ case 14:
+ Reg = &Regs->R14;
+ break;
+ case 15:
+ Reg = &Regs->R15;
+ break;
+ default:
+ Reg = NULL;
+ }
+ ASSERT (Reg != NULL);
+
+ return (INT64 *) Reg;
+}
+
+STATIC
+VOID
+UpdateForDisplacement (
+ SEV_ES_INSTRUCTION_DATA *InstructionData,
+ UINTN Size
+ )
+{
+ InstructionData->DisplacementSize = Size;
+ InstructionData->Immediate += Size;
+ InstructionData->End += Size;
+}
+
+STATIC
+BOOLEAN
+IsRipRelative (
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ SEV_ES_INSTRUCTION_OPCODE_EXT *Ext = &InstructionData->Ext;
+
+ return ((InstructionData == LongMode64Bit) &&
+ (Ext->ModRm.Mod == 0) &&
+ (Ext->ModRm.Rm == 5) &&
+ (InstructionData->SibPresent == FALSE));
+}
+
+STATIC
+UINTN
+GetEffectiveMemoryAddress (
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ SEV_ES_INSTRUCTION_OPCODE_EXT *Ext = &InstructionData->Ext;
+ INTN EffectiveAddress = 0;
+
+ if (IsRipRelative (InstructionData)) {
+ /* RIP-relative displacement is a 32-bit signed value */
+ INT32 RipRelative = *(INT32 *) InstructionData->Displacement;
+
+ UpdateForDisplacement (InstructionData, 4);
+ return (UINTN) ((INTN) Regs->Rip + RipRelative);
+ }
+
+ switch (Ext->ModRm.Mod) {
+ case 1:
+ UpdateForDisplacement (InstructionData, 1);
+ EffectiveAddress += (INT8) (*(INT8 *) (InstructionData->Displacement));
+ break;
+ case 2:
+ switch (InstructionData->AddrSize) {
+ case Size16Bits:
+ UpdateForDisplacement (InstructionData, 2);
+ EffectiveAddress += (INT16) (*(INT16 *) (InstructionData->Displacement));
+ break;
+ default:
+ UpdateForDisplacement (InstructionData, 4);
+ EffectiveAddress += (INT32) (*(INT32 *) (InstructionData->Displacement));
+ break;
+ }
+ break;
+ }
+
+ if (InstructionData->SibPresent) {
+ if (Ext->Sib.Index != 4) {
+ EffectiveAddress += (*GetRegisterPointer (Regs, Ext->Sib.Index) << Ext->Sib.Scale);
+ }
+
+ if ((Ext->Sib.Base != 5) || Ext->ModRm.Mod) {
+ EffectiveAddress += *GetRegisterPointer (Regs, Ext->Sib.Base);
+ } else {
+ UpdateForDisplacement (InstructionData, 4);
+ EffectiveAddress += (INT32) (*(INT32 *) (InstructionData->Displacement));
+ }
+ } else {
+ EffectiveAddress += *GetRegisterPointer (Regs, Ext->ModRm.Rm);
+ }
+
+ return (UINTN) EffectiveAddress;
+}
+
+STATIC
+VOID
+DecodeModRm (
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ SEV_ES_INSTRUCTION_REX_PREFIX *RexPrefix = &InstructionData->RexPrefix;
+ SEV_ES_INSTRUCTION_OPCODE_EXT *Ext = &InstructionData->Ext;
+ SEV_ES_INSTRUCTION_MODRM *ModRm = &InstructionData->ModRm;
+ SEV_ES_INSTRUCTION_SIB *Sib = &InstructionData->Sib;
+
+ InstructionData->ModRmPresent = TRUE;
+ ModRm->Uint8 = *(InstructionData->End);
+
+ InstructionData->Displacement++;
+ InstructionData->Immediate++;
+ InstructionData->End++;
+
+ Ext->ModRm.Mod = ModRm->Bits.Mod;
+ Ext->ModRm.Reg = (RexPrefix->Bits.R << 3) | ModRm->Bits.Reg;
+ Ext->ModRm.Rm = (RexPrefix->Bits.B << 3) | ModRm->Bits.Rm;
+
+ Ext->RegData = *GetRegisterPointer (Regs, Ext->ModRm.Reg);
+
+ if (Ext->ModRm.Mod == 3) {
+ Ext->RmData = *GetRegisterPointer (Regs, Ext->ModRm.Rm);
+ } else {
+ if (ModRm->Bits.Rm == 4) {
+ InstructionData->SibPresent = TRUE;
+ Sib->Uint8 = *(InstructionData->End);
+
+ InstructionData->Displacement++;
+ InstructionData->Immediate++;
+ InstructionData->End++;
+
+ Ext->Sib.Scale = Sib->Bits.Scale;
+ Ext->Sib.Index = (RexPrefix->Bits.X << 3) | Sib->Bits.Index;
+ Ext->Sib.Base = (RexPrefix->Bits.B << 3) | Sib->Bits.Base;
+ }
+
+ Ext->RmData = GetEffectiveMemoryAddress (Regs, InstructionData);
+ }
+}
+
STATIC
VOID
DecodePrefixes (
@@ -294,6 +486,111 @@ UnsupportedExit (
return Status;
}
+STATIC
+UINT64
+MmioExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ UINT64 ExitInfo1, ExitInfo2, Status;
+ UINTN Bytes;
+ INTN *Register;
+
+ Bytes = 0;
+
+ switch (*(InstructionData->OpCodes)) {
+ /* MMIO write */
+ case 0x88:
+ Bytes = 1;
+ case 0x89:
+ DecodeModRm (Regs, InstructionData);
+ Bytes = (Bytes) ? Bytes
+ : (InstructionData->DataSize == Size16Bits) ? 2
+ : (InstructionData->DataSize == Size32Bits) ? 4
+ : (InstructionData->DataSize == Size64Bits) ? 8
+ : 0;
+
+ if (InstructionData->Ext.ModRm.Mod == 3) {
+ /* NPF on two register operands??? */
+ return UnsupportedExit (Ghcb, Regs, InstructionData);
+ }
+
+ ExitInfo1 = InstructionData->Ext.RmData;
+ ExitInfo2 = Bytes;
+ CopyMem (Ghcb->SharedBuffer, &InstructionData->Ext.RegData, Bytes);
+
+ Ghcb->SaveArea.SwScratch = (UINT64) Ghcb->SharedBuffer;
+ Status = VmgExit (Ghcb, SvmExitMmioWrite, ExitInfo1, ExitInfo2);
+ if (Status) {
+ return Status;
+ }
+ break;
+
+ case 0xC6:
+ Bytes = 1;
+ case 0xC7:
+ DecodeModRm (Regs, InstructionData);
+ Bytes = (Bytes) ? Bytes
+ : (InstructionData->DataSize == Size16Bits) ? 2
+ : (InstructionData->DataSize == Size32Bits) ? 4
+ : 0;
+
+ InstructionData->ImmediateSize = Bytes;
+ InstructionData->End += Bytes;
+
+ ExitInfo1 = InstructionData->Ext.RmData;
+ ExitInfo2 = Bytes;
+ CopyMem (Ghcb->SharedBuffer, InstructionData->Immediate, Bytes);
+
+ Ghcb->SaveArea.SwScratch = (UINT64) Ghcb->SharedBuffer;
+ Status = VmgExit (Ghcb, SvmExitMmioWrite, ExitInfo1, ExitInfo2);
+ if (Status) {
+ return Status;
+ }
+ break;
+
+ /* MMIO read */
+ case 0x8A:
+ Bytes = 1;
+ case 0x8B:
+ DecodeModRm (Regs, InstructionData);
+ Bytes = (Bytes) ? Bytes
+ : (InstructionData->DataSize == Size16Bits) ? 2
+ : (InstructionData->DataSize == Size32Bits) ? 4
+ : (InstructionData->DataSize == Size64Bits) ? 8
+ : 0;
+ if (InstructionData->Ext.ModRm.Mod == 3) {
+ /* NPF on two register operands??? */
+ return UnsupportedExit (Ghcb, Regs, InstructionData);
+ }
+
+ ExitInfo1 = InstructionData->Ext.RmData;
+ ExitInfo2 = Bytes;
+
+ Ghcb->SaveArea.SwScratch = (UINT64) Ghcb->SharedBuffer;
+ Status = VmgExit (Ghcb, SvmExitMmioRead, ExitInfo1, ExitInfo2);
+ if (Status) {
+ return Status;
+ }
+
+ Register = GetRegisterPointer (Regs, InstructionData->Ext.ModRm.Reg);
+ if (Bytes == 4) {
+ /* Zero-extend for 32-bit operation */
+ *Register = 0;
+ }
+ CopyMem (Register, Ghcb->SharedBuffer, Bytes);
+ break;
+
+ default:
+ Status = GP_EXCEPTION;
+ ASSERT (FALSE);
+ }
+
+ return Status;
+}
+
STATIC
UINT64
MsrExit (
@@ -607,6 +904,10 @@ DoVcCommon (
NaeExit = MsrExit;
break;
+ case SvmExitNpf:
+ NaeExit = MmioExit;
+ break;
+
default:
NaeExit = UnsupportedExit;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 16/42] UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE events
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (14 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 15/42] UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE events (MMIO) Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 17/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC " Lendacky, Thomas
` (26 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a WBINVD intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../X64/ArchAMDSevVcHandler.c | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
index 3cac613c8889..55e18c47921e 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -591,6 +591,24 @@ MmioExit (
return Status;
}
+STATIC
+UINT64
+WbinvdExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ UINT64 Status;
+
+ Status = VmgExit (Ghcb, SvmExitWbinvd, 0, 0);
+ if (Status) {
+ return Status;
+ }
+
+ return 0;
+}
+
STATIC
UINT64
MsrExit (
@@ -904,6 +922,10 @@ DoVcCommon (
NaeExit = MsrExit;
break;
+ case SvmExitWbinvd:
+ NaeExit = WbinvdExit;
+ break;
+
case SvmExitNpf:
NaeExit = MmioExit;
break;
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 17/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC NAE events
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (15 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 16/42] UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE events Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 18/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC " Lendacky, Thomas
` (25 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a RDTSC intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../X64/ArchAMDSevVcHandler.c | 29 +++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
index 55e18c47921e..9de04f6d31f6 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -894,6 +894,31 @@ CpuidExit (
return 0;
}
+STATIC
+UINT64
+RdtscExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ UINT64 Status;
+
+ Status = VmgExit (Ghcb, SvmExitRdtsc, 0, 0);
+ if (Status) {
+ return Status;
+ }
+
+ if (!GhcbIsRegValid (Ghcb, GhcbRax) ||
+ !GhcbIsRegValid (Ghcb, GhcbRdx)) {
+ return UnsupportedExit (Ghcb, Regs, InstructionData);
+ }
+ Regs->Rax = Ghcb->SaveArea.Rax;
+ Regs->Rdx = Ghcb->SaveArea.Rdx;
+
+ return 0;
+}
+
UINTN
DoVcCommon (
GHCB *Ghcb,
@@ -910,6 +935,10 @@ DoVcCommon (
ExitCode = Regs->ExceptionData;
switch (ExitCode) {
+ case SvmExitRdtsc:
+ NaeExit = RdtscExit;
+ break;
+
case SvmExitCpuid:
NaeExit = CpuidExit;
break;
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 18/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC NAE events
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (16 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 17/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC " Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 19/42] UefiCpuPkg/CpuExceptionHandler: Add support for INVD " Lendacky, Thomas
` (24 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a RDPMC intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../X64/ArchAMDSevVcHandler.c | 32 +++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
index 9de04f6d31f6..ea67648d12ff 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -894,6 +894,34 @@ CpuidExit (
return 0;
}
+STATIC
+UINT64
+RdpmcExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ UINT64 Status;
+
+ Ghcb->SaveArea.Rcx = Regs->Rcx;
+ GhcbSetRegValid (Ghcb, GhcbRcx);
+
+ Status = VmgExit (Ghcb, SvmExitRdpmc, 0, 0);
+ if (Status) {
+ return Status;
+ }
+
+ if (!GhcbIsRegValid (Ghcb, GhcbRax) ||
+ !GhcbIsRegValid (Ghcb, GhcbRdx)) {
+ return UnsupportedExit (Ghcb, Regs, InstructionData);
+ }
+ Regs->Rax = Ghcb->SaveArea.Rax;
+ Regs->Rdx = Ghcb->SaveArea.Rdx;
+
+ return 0;
+}
+
STATIC
UINT64
RdtscExit (
@@ -939,6 +967,10 @@ DoVcCommon (
NaeExit = RdtscExit;
break;
+ case SvmExitRdpmc:
+ NaeExit = RdpmcExit;
+ break;
+
case SvmExitCpuid:
NaeExit = CpuidExit;
break;
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 19/42] UefiCpuPkg/CpuExceptionHandler: Add support for INVD NAE events
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (17 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 18/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC " Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 20/42] UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL " Lendacky, Thomas
` (23 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a INVD intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../X64/ArchAMDSevVcHandler.c | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
index ea67648d12ff..acba14d995cb 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -856,6 +856,24 @@ IoioExit (
return 0;
}
+STATIC
+UINT64
+InvdExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ UINT64 Status;
+
+ Status = VmgExit (Ghcb, SvmExitInvd, 0, 0);
+ if (Status) {
+ return Status;
+ }
+
+ return 0;
+}
+
STATIC
UINT64
CpuidExit (
@@ -975,6 +993,10 @@ DoVcCommon (
NaeExit = CpuidExit;
break;
+ case SvmExitInvd:
+ NaeExit = InvdExit;
+ break;
+
case SvmExitIoioProt:
NaeExit = IoioExit;
break;
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 20/42] UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL NAE events
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (18 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 19/42] UefiCpuPkg/CpuExceptionHandler: Add support for INVD " Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 21/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP " Lendacky, Thomas
` (22 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a VMMCALL intercept generates a #VC exception. VMGEXIT must
be used to allow the hypervisor to handle this intercept.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../X64/ArchAMDSevVcHandler.c | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
index acba14d995cb..7b57229a770c 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -609,6 +609,36 @@ WbinvdExit (
return 0;
}
+STATIC
+UINT64
+VmmCallExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ UINT64 Status;
+
+ DecodeModRm (Regs, InstructionData);
+
+ Ghcb->SaveArea.Rax = Regs->Rax;
+ GhcbSetRegValid (Ghcb, GhcbRax);
+ Ghcb->SaveArea.Cpl = (UINT8) (Regs->Cs & 0x3);
+ GhcbSetRegValid (Ghcb, GhcbCpl);
+
+ Status = VmgExit (Ghcb, SvmExitVmmCall, 0, 0);
+ if (Status) {
+ return Status;
+ }
+
+ if (!GhcbIsRegValid (Ghcb, GhcbRax)) {
+ return UnsupportedExit (Ghcb, Regs, InstructionData);
+ }
+ Regs->Rax = Ghcb->SaveArea.Rax;
+
+ return 0;
+}
+
STATIC
UINT64
MsrExit (
@@ -1005,6 +1035,10 @@ DoVcCommon (
NaeExit = MsrExit;
break;
+ case SvmExitVmmCall:
+ NaeExit = VmmCallExit;
+ break;
+
case SvmExitWbinvd:
NaeExit = WbinvdExit;
break;
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 21/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP NAE events
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (19 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 20/42] UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL " Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 22/42] UefiCpuPkg/CpuExceptionHandler: Add support for MONITOR/MONITORX " Lendacky, Thomas
` (21 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a RDTSCP intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../X64/ArchAMDSevVcHandler.c | 33 +++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
index 7b57229a770c..fcd4738b2915 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -609,6 +609,35 @@ WbinvdExit (
return 0;
}
+STATIC
+UINT64
+RdtscpExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ UINT64 Status;
+
+ DecodeModRm (Regs, InstructionData);
+
+ Status = VmgExit (Ghcb, SvmExitRdtscp, 0, 0);
+ if (Status) {
+ return Status;
+ }
+
+ if (!GhcbIsRegValid (Ghcb, GhcbRax) ||
+ !GhcbIsRegValid (Ghcb, GhcbRcx) ||
+ !GhcbIsRegValid (Ghcb, GhcbRdx)) {
+ return UnsupportedExit (Ghcb, Regs, InstructionData);
+ }
+ Regs->Rax = Ghcb->SaveArea.Rax;
+ Regs->Rcx = Ghcb->SaveArea.Rcx;
+ Regs->Rdx = Ghcb->SaveArea.Rdx;
+
+ return 0;
+}
+
STATIC
UINT64
VmmCallExit (
@@ -1039,6 +1068,10 @@ DoVcCommon (
NaeExit = VmmCallExit;
break;
+ case SvmExitRdtscp:
+ NaeExit = RdtscpExit;
+ break;
+
case SvmExitWbinvd:
NaeExit = WbinvdExit;
break;
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 22/42] UefiCpuPkg/CpuExceptionHandler: Add support for MONITOR/MONITORX NAE events
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (20 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 21/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP " Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 23/42] UefiCpuPkg/CpuExceptionHandler: Add support for MWAIT/MWAITX " Lendacky, Thomas
` (20 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a MONITOR/MONITORX intercept generates a #VC exception.
VMGEXIT must be used to allow the hypervisor to handle this intercept.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../X64/ArchAMDSevVcHandler.c | 31 +++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
index fcd4738b2915..90255cd55e5e 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -591,6 +591,33 @@ MmioExit (
return Status;
}
+STATIC
+UINT64
+MonitorExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ UINT64 Status;
+
+ DecodeModRm (Regs, InstructionData);
+
+ Ghcb->SaveArea.Rax = Regs->Rax; // Identity mapped, so VA = PA
+ GhcbSetRegValid (Ghcb, GhcbRax);
+ Ghcb->SaveArea.Rcx = Regs->Rcx;
+ GhcbSetRegValid (Ghcb, GhcbRcx);
+ Ghcb->SaveArea.Rdx = Regs->Rdx;
+ GhcbSetRegValid (Ghcb, GhcbRdx);
+
+ Status = VmgExit (Ghcb, SvmExitMonitor, 0, 0);
+ if (Status) {
+ return Status;
+ }
+
+ return 0;
+}
+
STATIC
UINT64
WbinvdExit (
@@ -1076,6 +1103,10 @@ DoVcCommon (
NaeExit = WbinvdExit;
break;
+ case SvmExitMonitor:
+ NaeExit = MonitorExit;
+ break;
+
case SvmExitNpf:
NaeExit = MmioExit;
break;
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 23/42] UefiCpuPkg/CpuExceptionHandler: Add support for MWAIT/MWAITX NAE events
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (21 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 22/42] UefiCpuPkg/CpuExceptionHandler: Add support for MONITOR/MONITORX " Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 24/42] UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write " Lendacky, Thomas
` (19 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a MWAIT/MWAITX intercept generates a #VC exception.
VMGEXIT must be used to allow the hypervisor to handle this intercept.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../X64/ArchAMDSevVcHandler.c | 29 +++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
index 90255cd55e5e..1fdbb122c35d 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -591,6 +591,31 @@ MmioExit (
return Status;
}
+STATIC
+UINT64
+MwaitExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ UINT64 Status;
+
+ DecodeModRm (Regs, InstructionData);
+
+ Ghcb->SaveArea.Rax = Regs->Rax;
+ GhcbSetRegValid (Ghcb, GhcbRax);
+ Ghcb->SaveArea.Rcx = Regs->Rcx;
+ GhcbSetRegValid (Ghcb, GhcbRcx);
+
+ Status = VmgExit (Ghcb, SvmExitMwait, 0, 0);
+ if (Status) {
+ return Status;
+ }
+
+ return 0;
+}
+
STATIC
UINT64
MonitorExit (
@@ -1107,6 +1132,10 @@ DoVcCommon (
NaeExit = MonitorExit;
break;
+ case SvmExitMwait:
+ NaeExit = MwaitExit;
+ break;
+
case SvmExitNpf:
NaeExit = MmioExit;
break;
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 24/42] UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write NAE events
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (22 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 23/42] UefiCpuPkg/CpuExceptionHandler: Add support for MWAIT/MWAITX " Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 25/42] OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator function Lendacky, Thomas
` (18 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a DR7 read or write intercept generates a #VC exception.
The #VC handler must provide special support to the guest for this. On
a DR7 write, the #VC handler must cache the value and issue a VMGEXIT
to notify the hypervisor of the write. However, the #VC handler must
not actually set the value of the DR7 register. On a DR7 read, the #VC
handler must return the cached value of the DR7 register to the guest.
VMGEXIT is not invoked for a DR7 register read.
To avoid exception recursion, a #VC exception will not try to read and
push the actual debug registers into the EFI_SYSTEM_CONTEXT_X64 struct
and instead push zeroes. The #VC exception handler does not make use of
the debug registers from saved context.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../X64/ArchAMDSevVcHandler.c | 68 +++++++++++++++++++
.../X64/ExceptionHandlerAsm.nasm | 17 +++++
2 files changed, 85 insertions(+)
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
index 1fdbb122c35d..cca9481e8900 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
@@ -13,6 +13,12 @@
#define CR4_OSXSAVE (1 << 18)
+#define DR7_RESET_VALUE 0x400
+typedef struct {
+ BOOLEAN Dr7Cached;
+ UINT64 Dr7;
+} SEV_ES_PER_CPU_DATA;
+
typedef enum {
LongMode64Bit = 0,
LongModeCompat32Bit,
@@ -1076,6 +1082,60 @@ RdtscExit (
return 0;
}
+STATIC
+UINT64
+Dr7WriteExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ SEV_ES_INSTRUCTION_OPCODE_EXT *Ext = &InstructionData->Ext;
+ SEV_ES_PER_CPU_DATA *SevEsData = (SEV_ES_PER_CPU_DATA *) (Ghcb + 1);
+ INTN *Register;
+ UINT64 Status;
+
+ DecodeModRm (Regs, InstructionData);
+
+ /* MOV DRn always treats MOD == 3 no matter how encoded */
+ Register = GetRegisterPointer (Regs, Ext->ModRm.Rm);
+
+ /* Using a value of 0 for ExitInfo1 means RAX holds the value */
+ Ghcb->SaveArea.Rax = *Register;
+ GhcbSetRegValid (Ghcb, GhcbRax);
+
+ Status = VmgExit (Ghcb, SvmExitDr7Write, 0, 0);
+ if (Status) {
+ return Status;
+ }
+
+ SevEsData->Dr7 = *Register;
+ SevEsData->Dr7Cached = TRUE;
+
+ return 0;
+}
+
+STATIC
+UINT64
+Dr7ReadExit (
+ GHCB *Ghcb,
+ EFI_SYSTEM_CONTEXT_X64 *Regs,
+ SEV_ES_INSTRUCTION_DATA *InstructionData
+ )
+{
+ SEV_ES_INSTRUCTION_OPCODE_EXT *Ext = &InstructionData->Ext;
+ SEV_ES_PER_CPU_DATA *SevEsData = (SEV_ES_PER_CPU_DATA *) (Ghcb + 1);
+ INTN *Register;
+
+ DecodeModRm (Regs, InstructionData);
+
+ /* MOV DRn always treats MOD == 3 no matter how encoded */
+ Register = GetRegisterPointer (Regs, Ext->ModRm.Rm);
+ *Register = (SevEsData->Dr7Cached) ? SevEsData->Dr7 : DR7_RESET_VALUE;
+
+ return 0;
+}
+
UINTN
DoVcCommon (
GHCB *Ghcb,
@@ -1092,6 +1152,14 @@ DoVcCommon (
ExitCode = Regs->ExceptionData;
switch (ExitCode) {
+ case SvmExitDr7Read:
+ NaeExit = Dr7ReadExit;
+ break;
+
+ case SvmExitDr7Write:
+ NaeExit = Dr7WriteExit;
+ break;
+
case SvmExitRdtsc:
NaeExit = RdtscExit;
break;
diff --git a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ExceptionHandlerAsm.nasm b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ExceptionHandlerAsm.nasm
index 19198f273137..26cae56cc5cf 100644
--- a/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ExceptionHandlerAsm.nasm
+++ b/UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ExceptionHandlerAsm.nasm
@@ -18,6 +18,8 @@
; CommonExceptionHandler()
;
+%define VC_EXCEPTION 29
+
extern ASM_PFX(mErrorCodeFlag) ; Error code flags for exceptions
extern ASM_PFX(mDoFarReturnFlag) ; Do far return flag
extern ASM_PFX(CommonExceptionHandler)
@@ -225,6 +227,9 @@ HasErrorCode:
push rax
;; UINT64 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7;
+ cmp qword [rbp + 8], VC_EXCEPTION
+ je VcDebugRegs ; For SEV-ES (#VC) Debug registers ignored
+
mov rax, dr7
push rax
mov rax, dr6
@@ -237,7 +242,19 @@ HasErrorCode:
push rax
mov rax, dr0
push rax
+ jmp DrFinish
+VcDebugRegs:
+;; UINT64 Dr0, Dr1, Dr2, Dr3, Dr6, Dr7 are skipped for #VC to avoid exception recursion
+ xor rax, rax
+ push rax
+ push rax
+ push rax
+ push rax
+ push rax
+ push rax
+
+DrFinish:
;; FX_SAVE_STATE_X64 FxSaveState;
sub rsp, 512
mov rdi, rsp
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 25/42] OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator function
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (23 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 24/42] UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write " Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 26/42] OvmfPkg: Add support to perform SEV-ES initialization Lendacky, Thomas
` (17 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Create a function that can be used to determine if the VM is running
as an SEV-ES guest.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
OvmfPkg/Include/Library/MemEncryptSevLib.h | 12 +++
.../MemEncryptSevLibInternal.c | 75 ++++++++++++-------
2 files changed, 60 insertions(+), 27 deletions(-)
diff --git a/OvmfPkg/Include/Library/MemEncryptSevLib.h b/OvmfPkg/Include/Library/MemEncryptSevLib.h
index 64dd6977b0f8..a50a0de9c870 100644
--- a/OvmfPkg/Include/Library/MemEncryptSevLib.h
+++ b/OvmfPkg/Include/Library/MemEncryptSevLib.h
@@ -13,6 +13,18 @@
#include <Base.h>
+/**
+ Returns a boolean to indicate whether SEV-ES is enabled
+
+ @retval TRUE SEV-ES is enabled
+ @retval FALSE SEV-ES is not enabled
+**/
+BOOLEAN
+EFIAPI
+MemEncryptSevEsIsEnabled (
+ VOID
+ );
+
/**
Returns a boolean to indicate whether SEV is enabled
diff --git a/OvmfPkg/Library/BaseMemEncryptSevLib/MemEncryptSevLibInternal.c b/OvmfPkg/Library/BaseMemEncryptSevLib/MemEncryptSevLibInternal.c
index 96a66e373f11..933734fa4427 100644
--- a/OvmfPkg/Library/BaseMemEncryptSevLib/MemEncryptSevLibInternal.c
+++ b/OvmfPkg/Library/BaseMemEncryptSevLib/MemEncryptSevLibInternal.c
@@ -20,19 +20,17 @@
#include <Uefi/UefiBaseType.h>
STATIC BOOLEAN mSevStatus = FALSE;
+STATIC BOOLEAN mSevEsStatus = FALSE;
STATIC BOOLEAN mSevStatusChecked = FALSE;
/**
- Returns a boolean to indicate whether SEV is enabled
-
- @retval TRUE SEV is enabled
- @retval FALSE SEV is not enabled
+ Reads and sets the status of SEV features
**/
STATIC
-BOOLEAN
+VOID
EFIAPI
-InternalMemEncryptSevIsEnabled (
+InternalMemEncryptSevStatus (
VOID
)
{
@@ -56,32 +54,55 @@ InternalMemEncryptSevIsEnabled (
//
Msr.Uint32 = AsmReadMsr32 (MSR_SEV_STATUS);
if (Msr.Bits.SevBit) {
- return TRUE;
+ mSevStatus = TRUE;
+ }
+
+ //
+ // Check MSR_0xC0010131 Bit 1 (Sev-Es Enabled)
+ //
+ if (Msr.Bits.SevEsBit) {
+ mSevEsStatus = TRUE;
}
}
}
- return FALSE;
-}
-
-/**
- Returns a boolean to indicate whether SEV is enabled
-
- @retval TRUE SEV is enabled
- @retval FALSE SEV is not enabled
-**/
-BOOLEAN
-EFIAPI
-MemEncryptSevIsEnabled (
- VOID
- )
-{
- if (mSevStatusChecked) {
- return mSevStatus;
- }
-
- mSevStatus = InternalMemEncryptSevIsEnabled();
mSevStatusChecked = TRUE;
+}
+
+/**
+ Returns a boolean to indicate whether SEV-ES is enabled
+
+ @retval TRUE SEV-ES is enabled
+ @retval FALSE SEV-ES is not enabled
+**/
+BOOLEAN
+EFIAPI
+MemEncryptSevEsIsEnabled (
+ VOID
+ )
+{
+ if (!mSevStatusChecked) {
+ InternalMemEncryptSevStatus ();
+ }
+
+ return mSevEsStatus;
+}
+
+/**
+ Returns a boolean to indicate whether SEV is enabled
+
+ @retval TRUE SEV is enabled
+ @retval FALSE SEV is not enabled
+**/
+BOOLEAN
+EFIAPI
+MemEncryptSevIsEnabled (
+ VOID
+ )
+{
+ if (!mSevStatusChecked) {
+ InternalMemEncryptSevStatus ();
+ }
return mSevStatus;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 26/42] OvmfPkg: Add support to perform SEV-ES initialization
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (24 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 25/42] OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator function Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 27/42] OvmfPkg: Create a GHCB page for use during Sec phase Lendacky, Thomas
` (16 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
When SEV-ES is enabled, then SEV is also enabled. Add support to the SEV
initialization function to also check for SEV-ES being enabled, and if
enabled, set the SEV-ES enabled PCD (PcdSevEsIsEnabled).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
OvmfPkg/OvmfPkgIa32.dsc | 3 +++
OvmfPkg/OvmfPkgIa32X64.dsc | 3 +++
OvmfPkg/OvmfPkgX64.dsc | 3 +++
OvmfPkg/PlatformPei/PlatformPei.inf | 1 +
OvmfPkg/PlatformPei/AmdSev.c | 26 ++++++++++++++++++++++++++
5 files changed, 36 insertions(+)
diff --git a/OvmfPkg/OvmfPkgIa32.dsc b/OvmfPkg/OvmfPkgIa32.dsc
index 2701630be8f0..d6bb1f6e795c 100644
--- a/OvmfPkg/OvmfPkgIa32.dsc
+++ b/OvmfPkg/OvmfPkgIa32.dsc
@@ -580,6 +580,9 @@ [PcdsDynamicDefault]
# Set memory encryption mask
gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0
+ # Set SEV-ES defaults
+ gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled|0
+
!if $(SMM_REQUIRE) == TRUE
gUefiOvmfPkgTokenSpaceGuid.PcdQ35TsegMbytes|8
gUefiOvmfPkgTokenSpaceGuid.PcdQ35SmramAtDefaultSmbase|FALSE
diff --git a/OvmfPkg/OvmfPkgIa32X64.dsc b/OvmfPkg/OvmfPkgIa32X64.dsc
index 671fdfbbd47d..78d2107846a0 100644
--- a/OvmfPkg/OvmfPkgIa32X64.dsc
+++ b/OvmfPkg/OvmfPkgIa32X64.dsc
@@ -591,6 +591,9 @@ [PcdsDynamicDefault]
# Set memory encryption mask
gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0
+ # Set SEV-ES defaults
+ gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled|0
+
!if $(SMM_REQUIRE) == TRUE
gUefiOvmfPkgTokenSpaceGuid.PcdQ35TsegMbytes|8
gUefiOvmfPkgTokenSpaceGuid.PcdQ35SmramAtDefaultSmbase|FALSE
diff --git a/OvmfPkg/OvmfPkgX64.dsc b/OvmfPkg/OvmfPkgX64.dsc
index 5abf83e05480..65dd4c612073 100644
--- a/OvmfPkg/OvmfPkgX64.dsc
+++ b/OvmfPkg/OvmfPkgX64.dsc
@@ -590,6 +590,9 @@ [PcdsDynamicDefault]
# Set memory encryption mask
gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0
+ # Set SEV-ES defaults
+ gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled|0
+
!if $(SMM_REQUIRE) == TRUE
gUefiOvmfPkgTokenSpaceGuid.PcdQ35TsegMbytes|8
gUefiOvmfPkgTokenSpaceGuid.PcdQ35SmramAtDefaultSmbase|FALSE
diff --git a/OvmfPkg/PlatformPei/PlatformPei.inf b/OvmfPkg/PlatformPei/PlatformPei.inf
index 8531c63995c1..19fc6002cadb 100644
--- a/OvmfPkg/PlatformPei/PlatformPei.inf
+++ b/OvmfPkg/PlatformPei/PlatformPei.inf
@@ -102,6 +102,7 @@ [Pcd]
gUefiCpuPkgTokenSpaceGuid.PcdCpuMaxLogicalProcessorNumber
gUefiCpuPkgTokenSpaceGuid.PcdCpuBootLogicalProcessorNumber
gUefiCpuPkgTokenSpaceGuid.PcdCpuApStackSize
+ gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled
[FixedPcd]
gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress
diff --git a/OvmfPkg/PlatformPei/AmdSev.c b/OvmfPkg/PlatformPei/AmdSev.c
index e484f4b311fe..4dc5340caa7a 100644
--- a/OvmfPkg/PlatformPei/AmdSev.c
+++ b/OvmfPkg/PlatformPei/AmdSev.c
@@ -21,6 +21,27 @@
#include "Platform.h"
+/**
+
+ Initialize SEV-ES support if running as an SEV-ES guest.
+
+ **/
+STATIC
+VOID
+AmdSevEsInitialize (
+ VOID
+ )
+{
+ RETURN_STATUS PcdStatus;
+
+ if (!MemEncryptSevEsIsEnabled ()) {
+ return;
+ }
+
+ PcdStatus = PcdSetBoolS (PcdSevEsIsEnabled, TRUE);
+ ASSERT_RETURN_ERROR (PcdStatus);
+}
+
/**
Function checks if SEV support is available, if present then it sets
@@ -103,4 +124,9 @@ AmdSevInitialize (
);
}
}
+
+ //
+ // Check and perform SEV-ES initialization if required.
+ //
+ AmdSevEsInitialize ();
}
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 27/42] OvmfPkg: Create a GHCB page for use during Sec phase
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (25 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 26/42] OvmfPkg: Add support to perform SEV-ES initialization Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 28/42] OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is supported Lendacky, Thomas
` (15 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
A GHCB page is needed during the Sec phase, so this new page must be
created. Since the #VC exception handler routines assume that a per-CPU
variable area is immediately after the GHCB, this per-CPU variable area
must also be created. Since the GHCB must be marked as an un-encrypted,
or shared, page, an additional pagetable page is required to break down
the 2MB region where the GHCB page lives into 4K pagetable entries.
Create a new entry in the OVMF memory layout for the new page table
page and for the SEC GHCB and per-CPU variable pages. After breaking down
the 2MB page, update the GHCB page table entry to remove the encryption
mask.
The GHCB page will be used by the SEC #VC exception handler. The #VC
exception handler will fill in the necessary fields of the GHCB and exit
to the hypervisor using the VMGEXIT instruction. The hypervisor then
accesses the GHCB in order to perform the requested function.
Two new fixed PCDs are needed to support the SEC GHCB page:
- PcdOvmfSecGhcbBase UINT64 value that is the base address of the
GHCB used during the SEC phase.
- PcdOvmfSecGhcbSize UINT64 value that is the size, in bytes, of the
GHCB area used during the SEC phase.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
OvmfPkg/OvmfPkg.dec | 9 +++
OvmfPkg/OvmfPkgX64.fdf | 6 ++
OvmfPkg/ResetVector/ResetVector.inf | 5 ++
OvmfPkg/ResetVector/Ia32/PageTables64.asm | 76 +++++++++++++++++++++++
OvmfPkg/ResetVector/ResetVector.nasmb | 17 +++++
5 files changed, 113 insertions(+)
diff --git a/OvmfPkg/OvmfPkg.dec b/OvmfPkg/OvmfPkg.dec
index 913345d49e1f..8d28213629dd 100644
--- a/OvmfPkg/OvmfPkg.dec
+++ b/OvmfPkg/OvmfPkg.dec
@@ -241,6 +241,15 @@ [PcdsFixedAtBuild]
## Number of page frames to use for storing grant table entries.
gUefiOvmfPkgTokenSpaceGuid.PcdXenGrantFrames|4|UINT32|0x33
+ ## Specify the extra page table needed to mark the GHCB as unencrypted.
+ # The value should be a multiple of 4KB for each.
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbPageTableBase|0x0|UINT32|0x36
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbPageTableSize|0x0|UINT32|0x37
+
+ ## The base address of the SEC GHCB page used by SEV-ES.
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbBase|0|UINT32|0x38
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbSize|0|UINT32|0x39
+
[PcdsDynamic, PcdsDynamicEx]
gUefiOvmfPkgTokenSpaceGuid.PcdEmuVariableEvent|0|UINT64|2
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashVariablesEnable|FALSE|BOOLEAN|0x10
diff --git a/OvmfPkg/OvmfPkgX64.fdf b/OvmfPkg/OvmfPkgX64.fdf
index 0e2a5caaf906..f218ae10a78d 100644
--- a/OvmfPkg/OvmfPkgX64.fdf
+++ b/OvmfPkg/OvmfPkgX64.fdf
@@ -76,6 +76,12 @@ [FD.MEMFD]
0x007000|0x001000
gEfiMdePkgTokenSpaceGuid.PcdGuidedExtractHandlerTableAddress|gUefiOvmfPkgTokenSpaceGuid.PcdGuidedExtractHandlerTableSize
+0x008000|0x001000
+gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbPageTableBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbPageTableSize
+
+0x009000|0x002000
+gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbSize
+
0x010000|0x010000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamSize
diff --git a/OvmfPkg/ResetVector/ResetVector.inf b/OvmfPkg/ResetVector/ResetVector.inf
index b0ddfa5832a2..483fd90fe785 100644
--- a/OvmfPkg/ResetVector/ResetVector.inf
+++ b/OvmfPkg/ResetVector/ResetVector.inf
@@ -26,6 +26,7 @@ [Sources]
[Packages]
OvmfPkg/OvmfPkg.dec
MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
UefiCpuPkg/UefiCpuPkg.dec
[BuildOptions]
@@ -33,5 +34,9 @@ [BuildOptions]
*_*_X64_NASMB_FLAGS = -I$(WORKSPACE)/UefiCpuPkg/ResetVector/Vtf0/
[Pcd]
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbBase
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbSize
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbPageTableBase
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbPageTableSize
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesBase
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesSize
diff --git a/OvmfPkg/ResetVector/Ia32/PageTables64.asm b/OvmfPkg/ResetVector/Ia32/PageTables64.asm
index abad009f20f5..9f86ddf6f08f 100644
--- a/OvmfPkg/ResetVector/Ia32/PageTables64.asm
+++ b/OvmfPkg/ResetVector/Ia32/PageTables64.asm
@@ -21,6 +21,11 @@ BITS 32
%define PAGE_2M_MBO 0x080
%define PAGE_2M_PAT 0x01000
+%define PAGE_4K_PDE_ATTR (PAGE_ACCESSED + \
+ PAGE_DIRTY + \
+ PAGE_READ_WRITE + \
+ PAGE_PRESENT)
+
%define PAGE_2M_PDE_ATTR (PAGE_2M_MBO + \
PAGE_ACCESSED + \
PAGE_DIRTY + \
@@ -75,6 +80,37 @@ NoSev:
SevExit:
OneTimeCallRet CheckSevFeature
+; Check if Secure Encrypted Virtualization - Encrypted State (SEV-ES) feature
+; is enabled.
+;
+; Modified: EAX, EBX, ECX
+;
+; If SEV-ES is enabled then EAX will be non-zero.
+; If SEV-ES is disabled then EAX will be zero.
+;
+CheckSevEsFeature:
+ xor eax, eax
+
+ ; SEV-ES can't be enabled if SEV isn't, so first check the encryption
+ ; mask.
+ test edx, edx
+ jz NoSevEs
+
+ ; Save current value of encryption mask
+ mov ebx, edx
+
+ ; Check if SEV-ES is enabled
+ ; MSR_0xC0010131 - Bit 1 (SEV-ES enabled)
+ mov ecx, 0xc0010131
+ rdmsr
+ and eax, 2
+
+ ; Restore encryption mask
+ mov edx, ebx
+
+NoSevEs:
+ OneTimeCallRet CheckSevEsFeature
+
;
; Modified: EAX, EBX, ECX, EDX
;
@@ -139,6 +175,46 @@ pageTableEntriesLoop:
mov [(ecx * 8 + PT_ADDR (0x2000 - 8)) + 4], edx
loop pageTableEntriesLoop
+ OneTimeCall CheckSevEsFeature
+ test eax, eax
+ jz SetCr3
+
+ ;
+ ; The initial GHCB will live at GHCB_BASE and needs to be un-encrypted.
+ ; This requires the 2MB page for this range be broken down into 512 4KB
+ ; pages. All will be marked encrypted, except for the GHCB.
+ ;
+ mov ecx, (GHCB_BASE >> 21)
+ mov eax, GHCB_PT_ADDR + PAGE_PDP_ATTR
+ mov [ecx * 8 + PT_ADDR (0x2000)], eax
+
+ ;
+ ; Page Table Entries (512 * 4KB entries => 2MB)
+ ;
+ mov ecx, 512
+pageTableEntries4kLoop:
+ mov eax, ecx
+ dec eax
+ shl eax, 12
+ add eax, GHCB_BASE & 0xFFE0_0000
+ add eax, PAGE_4K_PDE_ATTR
+ mov [ecx * 8 + GHCB_PT_ADDR - 8], eax
+ mov [(ecx * 8 + GHCB_PT_ADDR - 8) + 4], edx
+ loop pageTableEntries4kLoop
+
+ ;
+ ; Clear the encryption bit from the GHCB entry
+ ;
+ mov ecx, (GHCB_BASE & 0x1F_FFFF) >> 12
+ mov [ecx * 8 + GHCB_PT_ADDR + 4], strict dword 0
+
+ mov ecx, GHCB_SIZE / 4
+ xor eax, eax
+clearGhcbMemoryLoop:
+ mov dword[ecx * 4 + GHCB_BASE - 4], eax
+ loop clearGhcbMemoryLoop
+
+SetCr3:
;
; Set CR3 now that the paging structures are available
;
diff --git a/OvmfPkg/ResetVector/ResetVector.nasmb b/OvmfPkg/ResetVector/ResetVector.nasmb
index 75cfe16654b1..bfb77e439105 100644
--- a/OvmfPkg/ResetVector/ResetVector.nasmb
+++ b/OvmfPkg/ResetVector/ResetVector.nasmb
@@ -53,8 +53,25 @@
%error "This implementation inherently depends on PcdOvmfSecPageTablesSize"
%endif
+ %if (FixedPcdGet32 (PcdOvmfSecGhcbPageTableSize) != 0x1000)
+ %error "This implementation inherently depends on PcdOvmfSecGhcbPageTableSize"
+ %endif
+
+ %if (FixedPcdGet32 (PcdOvmfSecGhcbSize) != 0x2000)
+ %error "This implementation inherently depends on PcdOvmfSecGhcbSize"
+ %endif
+
+ %if ((FixedPcdGet32 (PcdOvmfSecGhcbBase) >> 21) != \
+ ((FixedPcdGet32 (PcdOvmfSecGhcbBase) + FixedPcdGet32 (PcdOvmfSecGhcbSize) - 1) >> 21))
+ %error "This implementation inherently depends on PcdOvmfSecGhcbBase not straddling a 2MB boundary"
+ %endif
+
%define PT_ADDR(Offset) (FixedPcdGet32 (PcdOvmfSecPageTablesBase) + (Offset))
%include "Ia32/Flat32ToFlat64.asm"
+
+ %define GHCB_PT_ADDR (FixedPcdGet32 (PcdOvmfSecGhcbPageTableBase))
+ %define GHCB_BASE (FixedPcdGet32 (PcdOvmfSecGhcbBase))
+ %define GHCB_SIZE (FixedPcdGet32 (PcdOvmfSecGhcbSize))
%include "Ia32/PageTables64.asm"
%endif
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 28/42] OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is supported
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (26 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 27/42] OvmfPkg: Create a GHCB page for use during Sec phase Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 29/42] OvmfPkg: Create GHCB pages for use during Pei and Dxe phase Lendacky, Thomas
` (14 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh, Anthony Perard,
Julien Grall
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Protect the memory used by an SEV-ES guest when S3 is supported. This
includes the page table used to break down the 2MB page that contains
the GHCB so that it can be marked un-encrypted, as well as the GHCB
area.
Regarding the lifecycle of the GHCB-related memory areas:
PcdOvmfSecGhcbPageTableBase
PcdOvmfSecGhcbBase
(a) when and how it is initialized after first boot of the VM
If SEV-ES is enabled, the GHCB-related areas are initialized during
the SEC phase [OvmfPkg/ResetVector/Ia32/PageTables64.asm].
(b) how it is protected from memory allocations during DXE
If S3 and SEV-ES are enabled, then InitializeRamRegions()
[OvmfPkg/PlatformPei/MemDetect.c] protects the ranges with an AcpiNVS
memory allocation HOB, in PEI.
If S3 is disabled, then these ranges are not protected. DXE's own page
tables are first built while still in PEI (see HandOffToDxeCore()
[MdeModulePkg/Core/DxeIplPeim/X64/DxeLoadFunc.c]). Those tables are
located in permanent PEI memory. After CR3 is switched over to them
(which occurs before jumping to the DXE core entry point), we don't have
to preserve PcdOvmfSecGhcbPageTableBase. PEI switches to GHCB pages in
permanent PEI memory and DXE will use these PEI GHCB pages, so we don't
have to preserve PcdOvmfSecGhcbBase.
(c) how it is protected from the OS
If S3 is enabled, then (b) reserves it from the OS too.
If S3 is disabled, then the range needs no protection.
(d) how it is accessed on the S3 resume path
It is rewritten same as in (a), which is fine because (b) reserved it.
(e) how it is accessed on the warm reset path
It is rewritten same as in (a).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
OvmfPkg/PlatformPei/PlatformPei.inf | 4 ++++
OvmfPkg/PlatformPei/MemDetect.c | 23 +++++++++++++++++++++++
2 files changed, 27 insertions(+)
diff --git a/OvmfPkg/PlatformPei/PlatformPei.inf b/OvmfPkg/PlatformPei/PlatformPei.inf
index 19fc6002cadb..a9ad3f8ab522 100644
--- a/OvmfPkg/PlatformPei/PlatformPei.inf
+++ b/OvmfPkg/PlatformPei/PlatformPei.inf
@@ -73,6 +73,10 @@ [Pcd]
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamSize
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesBase
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesSize
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbPageTableBase
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbPageTableSize
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbBase
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbSize
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfLockBoxStorageBase
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfLockBoxStorageSize
gUefiOvmfPkgTokenSpaceGuid.PcdGuidedExtractHandlerTableSize
diff --git a/OvmfPkg/PlatformPei/MemDetect.c b/OvmfPkg/PlatformPei/MemDetect.c
index 47dc9c543719..200021098161 100644
--- a/OvmfPkg/PlatformPei/MemDetect.c
+++ b/OvmfPkg/PlatformPei/MemDetect.c
@@ -27,6 +27,7 @@ Module Name:
#include <Library/DebugLib.h>
#include <Library/HobLib.h>
#include <Library/IoLib.h>
+#include <Library/MemEncryptSevLib.h>
#include <Library/PcdLib.h>
#include <Library/PciLib.h>
#include <Library/PeimEntryPoint.h>
@@ -860,6 +861,28 @@ InitializeRamRegions (
(UINT64)(UINTN) PcdGet32 (PcdOvmfSecPageTablesSize),
EfiACPIMemoryNVS
);
+
+ if (MemEncryptSevEsIsEnabled ()) {
+ //
+ // If SEV-ES is enabled, reserve the GHCB-related memory area. This
+ // includes the extra page table used to break down the 2MB page
+ // mapping into 4KB page entries where the GHCB resides and the
+ // GHCB area itself.
+ //
+ // Since this memory range will be used by the Reset Vector on S3
+ // resume, it must be reserved as ACPI NVS.
+ //
+ BuildMemoryAllocationHob (
+ (EFI_PHYSICAL_ADDRESS)(UINTN) PcdGet32 (PcdOvmfSecGhcbPageTableBase),
+ (UINT64)(UINTN) PcdGet32 (PcdOvmfSecGhcbPageTableSize),
+ EfiACPIMemoryNVS
+ );
+ BuildMemoryAllocationHob (
+ (EFI_PHYSICAL_ADDRESS)(UINTN) PcdGet32 (PcdOvmfSecGhcbBase),
+ (UINT64)(UINTN) PcdGet32 (PcdOvmfSecGhcbSize),
+ EfiACPIMemoryNVS
+ );
+ }
#endif
}
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 29/42] OvmfPkg: Create GHCB pages for use during Pei and Dxe phase
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (27 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 28/42] OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is supported Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 30/42] OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is enabled Lendacky, Thomas
` (13 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Allocate memory for the GHCB pages and the per-CPU variable pages during
SEV initialization for use during Pei and Dxe phases. The GHCB page(s)
must be shared pages, so clear the encryption mask from the current page
table entries. Upon successful allocation, set the GHCB PCDs (PcdGhcbBase
and PcdGhcbSize).
The per-CPU variable page needs to be unique per AP. Using the page after
the GHCB ensures that it is unique per AP. But, it also ends up being
marked shared/unencrypted when it doesn't need to be. It is possible
during PEI to mark only the GHCB pages as shared (and that is done), but
DXE is not as easy. There needs to be a way to change the pagetables
created for DXE using CreateIdentityMappingPageTables() before switching
to them.
The GHCB pages (one per vCPU) will be used by the PEI and DXE #VC
exception handlers. The #VC exception handler will fill in the necessary
fields of the GHCB and exit to the hypervisor using the VMGEXIT
instruction. The hypervisor then accesses the GHCB associated with the
vCPU in order to perform the requested function.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
OvmfPkg/OvmfPkgIa32.dsc | 2 ++
OvmfPkg/OvmfPkgIa32X64.dsc | 2 ++
OvmfPkg/OvmfPkgX64.dsc | 2 ++
OvmfPkg/PlatformPei/PlatformPei.inf | 2 ++
OvmfPkg/PlatformPei/AmdSev.c | 38 ++++++++++++++++++++++++++++-
5 files changed, 45 insertions(+), 1 deletion(-)
diff --git a/OvmfPkg/OvmfPkgIa32.dsc b/OvmfPkg/OvmfPkgIa32.dsc
index d6bb1f6e795c..8934c7e78610 100644
--- a/OvmfPkg/OvmfPkgIa32.dsc
+++ b/OvmfPkg/OvmfPkgIa32.dsc
@@ -581,6 +581,8 @@ [PcdsDynamicDefault]
gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0
# Set SEV-ES defaults
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbSize|0
gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled|0
!if $(SMM_REQUIRE) == TRUE
diff --git a/OvmfPkg/OvmfPkgIa32X64.dsc b/OvmfPkg/OvmfPkgIa32X64.dsc
index 78d2107846a0..0bdff7f7db44 100644
--- a/OvmfPkg/OvmfPkgIa32X64.dsc
+++ b/OvmfPkg/OvmfPkgIa32X64.dsc
@@ -592,6 +592,8 @@ [PcdsDynamicDefault]
gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0
# Set SEV-ES defaults
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbSize|0
gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled|0
!if $(SMM_REQUIRE) == TRUE
diff --git a/OvmfPkg/OvmfPkgX64.dsc b/OvmfPkg/OvmfPkgX64.dsc
index 65dd4c612073..6e83a1e2f39d 100644
--- a/OvmfPkg/OvmfPkgX64.dsc
+++ b/OvmfPkg/OvmfPkgX64.dsc
@@ -591,6 +591,8 @@ [PcdsDynamicDefault]
gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0
# Set SEV-ES defaults
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase|0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbSize|0
gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled|0
!if $(SMM_REQUIRE) == TRUE
diff --git a/OvmfPkg/PlatformPei/PlatformPei.inf b/OvmfPkg/PlatformPei/PlatformPei.inf
index a9ad3f8ab522..c0bf4c2ee8b9 100644
--- a/OvmfPkg/PlatformPei/PlatformPei.inf
+++ b/OvmfPkg/PlatformPei/PlatformPei.inf
@@ -101,6 +101,8 @@ [Pcd]
gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable
gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbSize
gEfiSecurityPkgTokenSpaceGuid.PcdOptionRomImageVerificationPolicy
gUefiCpuPkgTokenSpaceGuid.PcdCpuLocalApicBaseAddress
gUefiCpuPkgTokenSpaceGuid.PcdCpuMaxLogicalProcessorNumber
diff --git a/OvmfPkg/PlatformPei/AmdSev.c b/OvmfPkg/PlatformPei/AmdSev.c
index 4dc5340caa7a..5f0946763507 100644
--- a/OvmfPkg/PlatformPei/AmdSev.c
+++ b/OvmfPkg/PlatformPei/AmdSev.c
@@ -10,12 +10,15 @@
// The package level header files this module uses
//
#include <IndustryStandard/Q35MchIch9.h>
+#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/HobLib.h>
#include <Library/MemEncryptSevLib.h>
+#include <Library/MemoryAllocationLib.h>
#include <Library/PcdLib.h>
#include <PiPei.h>
#include <Register/Amd/Cpuid.h>
+#include <Register/Amd/Msr.h>
#include <Register/Cpuid.h>
#include <Register/Intel/SmramSaveStateMap.h>
@@ -32,7 +35,10 @@ AmdSevEsInitialize (
VOID
)
{
- RETURN_STATUS PcdStatus;
+ VOID *GhcbBase;
+ PHYSICAL_ADDRESS GhcbBasePa;
+ UINTN GhcbPageCount;
+ RETURN_STATUS PcdStatus, DecryptStatus;
if (!MemEncryptSevEsIsEnabled ()) {
return;
@@ -40,6 +46,36 @@ AmdSevEsInitialize (
PcdStatus = PcdSetBoolS (PcdSevEsIsEnabled, TRUE);
ASSERT_RETURN_ERROR (PcdStatus);
+
+ //
+ // Allocate GHCB and per-CPU variable pages.
+ //
+ GhcbPageCount = mMaxCpuCount * 2;
+ GhcbBase = AllocatePages (GhcbPageCount);
+ ASSERT (GhcbBase != NULL);
+
+ GhcbBasePa = (PHYSICAL_ADDRESS)(UINTN) GhcbBase;
+
+ DecryptStatus = MemEncryptSevClearPageEncMask (
+ 0,
+ GhcbBasePa,
+ GhcbPageCount,
+ TRUE
+ );
+ ASSERT_RETURN_ERROR (DecryptStatus);
+
+ ZeroMem (GhcbBase, EFI_PAGES_TO_SIZE (GhcbPageCount));
+
+ PcdStatus = PcdSet64S (PcdGhcbBase, GhcbBasePa);
+ ASSERT_RETURN_ERROR (PcdStatus);
+ PcdStatus = PcdSet64S (PcdGhcbSize, EFI_PAGES_TO_SIZE (GhcbPageCount));
+ ASSERT_RETURN_ERROR (PcdStatus);
+
+ DEBUG ((DEBUG_INFO,
+ "SEV-ES is enabled, %lu GHCB pages allocated starting at 0x%p\n",
+ (UINT64)GhcbPageCount, GhcbBase));
+
+ AsmWriteMsr64 (MSR_SEV_ES_GHCB, GhcbBasePa);
}
/**
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 30/42] OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is enabled
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (28 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 29/42] OvmfPkg: Create GHCB pages for use during Pei and Dxe phase Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 31/42] UefiCpuPkg: Create an SEV-ES workarea PCD Lendacky, Thomas
` (12 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
The SEV support will clear the C-bit from non-RAM areas. The early GDT
lives in a non-RAM area, so when an exception occurs (like a #VC) the GDT
will be read as un-encrypted even though it is encrypted. This will result
in a failure to be able to handle the exception.
Move the GDT into RAM so it can be accessed without error when running as
an SEV-ES guest.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
OvmfPkg/PlatformPei/AmdSev.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/OvmfPkg/PlatformPei/AmdSev.c b/OvmfPkg/PlatformPei/AmdSev.c
index 5f0946763507..38885de359af 100644
--- a/OvmfPkg/PlatformPei/AmdSev.c
+++ b/OvmfPkg/PlatformPei/AmdSev.c
@@ -39,6 +39,8 @@ AmdSevEsInitialize (
PHYSICAL_ADDRESS GhcbBasePa;
UINTN GhcbPageCount;
RETURN_STATUS PcdStatus, DecryptStatus;
+ IA32_DESCRIPTOR Gdtr;
+ VOID *Gdt;
if (!MemEncryptSevEsIsEnabled ()) {
return;
@@ -76,6 +78,22 @@ AmdSevEsInitialize (
(UINT64)GhcbPageCount, GhcbBase));
AsmWriteMsr64 (MSR_SEV_ES_GHCB, GhcbBasePa);
+
+ //
+ // The SEV support will clear the C-bit from non-RAM areas. The early GDT
+ // lives in a non-RAM area, so when an exception occurs (like a #VC) the GDT
+ // will be read as un-encrypted even though it was created before the C-bit
+ // was cleared (encrypted). This will result in a failure to be able to
+ // handle the exception.
+ //
+ AsmReadGdtr (&Gdtr);
+
+ Gdt = AllocatePages (EFI_SIZE_TO_PAGES ((UINTN) Gdtr.Limit + 1));
+ ASSERT (Gdt != NULL);
+
+ CopyMem (Gdt, (VOID *) Gdtr.Base, Gdtr.Limit + 1);
+ Gdtr.Base = (UINTN) Gdt;
+ AsmWriteGdtr (&Gdtr);
}
/**
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 31/42] UefiCpuPkg: Create an SEV-ES workarea PCD
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (29 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 30/42] OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is enabled Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 32/42] OvmfPkg: Reserve a page in memory for the SEV-ES usage Lendacky, Thomas
` (11 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Create an SEV-ES workarea PCD. This PCD will be used for BSP communication
during SEC and for AP startup during PEI and DXE phases, the latter is the
reason for creating it in the UefiCpuPkg.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
UefiCpuPkg/UefiCpuPkg.dec | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec
index 795d1c8dedba..c3c2c7bc78de 100644
--- a/UefiCpuPkg/UefiCpuPkg.dec
+++ b/UefiCpuPkg/UefiCpuPkg.dec
@@ -161,6 +161,14 @@ [PcdsFixedAtBuild]
# @Prompt Specify the count of pre allocated SMM MP tokens per chunk.
gUefiCpuPkgTokenSpaceGuid.PcdCpuSmmMpTokenCountPerChunk|64|UINT32|0x30002002
+ ## Area of memory where the SEV-ES work area block lives.
+ # @Prompt Configure the SEV-ES work area base
+ gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaBase|0x0|UINT32|0x30002005
+
+ ## Size of teh area of memory where the SEV-ES work area block lives.
+ # @Prompt Configure the SEV-ES work area base
+ gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaSize|0x0|UINT32|0x30002006
+
[PcdsFixedAtBuild, PcdsPatchableInModule]
## This value is the CPU Local APIC base address, which aligns the address on a 4-KByte boundary.
# @Prompt Configure base address of CPU Local APIC
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 32/42] OvmfPkg: Reserve a page in memory for the SEV-ES usage
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (30 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 31/42] UefiCpuPkg: Create an SEV-ES workarea PCD Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 33/42] OvmfPkg/ResetVector: Add support for a 32-bit SEV check Lendacky, Thomas
` (10 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Reserve a fixed area of memory for SEV-ES use and set a fixed PCD,
PcdSevEsWorkAreaBase, to this value.
This area will be used by SEV-ES support for two purposes:
1. Communicating the SEV-ES status during BSP boot to SEC:
Using a byte of memory from the page, the BSP reset vector code can
communicate the SEV-ES status to SEC for use before exception
handling can be enabled in SEC. After SEC, this field is no longer
valid and the standard way of determine if SEV-ES is active should
be used.
2. Establishing an area of memory for AP boot support:
A hypervisor is not allowed to update an SEV-ES guest's register
state, so when booting an SEV-ES guest AP, the hypervisor is not
allowed to set the RIP to the guest requested value. Instead an
SEV-ES AP must be re-directed from within the guest to the actual
requested staring location as specified in the INIT-SIPI-SIPI
sequence.
Use this memory for reset vector code that can be programmed to have
the AP jump to the desired RIP location after starting the AP. This
is required for only the very first AP reset.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
OvmfPkg/OvmfPkgX64.fdf | 3 +++
1 file changed, 3 insertions(+)
diff --git a/OvmfPkg/OvmfPkgX64.fdf b/OvmfPkg/OvmfPkgX64.fdf
index f218ae10a78d..c0889338803e 100644
--- a/OvmfPkg/OvmfPkgX64.fdf
+++ b/OvmfPkg/OvmfPkgX64.fdf
@@ -82,6 +82,9 @@ [FD.MEMFD]
0x009000|0x002000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbSize
+0x00B000|0x001000
+gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaBase|gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaSize
+
0x010000|0x010000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamSize
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 33/42] OvmfPkg/ResetVector: Add support for a 32-bit SEV check
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (31 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 32/42] OvmfPkg: Reserve a page in memory for the SEV-ES usage Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 34/42] OvmfPkg/Sec: Add #VC exception handling for Sec phase Lendacky, Thomas
` (9 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
During BSP startup, the reset vector code will issue a CPUID instruction
while in 32-bit mode. When running as an SEV-ES guest, this will trigger
a #VC exception.
Add exception handling support to the early reset vector code to catch
these exceptions. Also, since the guest is in 32-bit mode at this point,
writes to the GHCB will be encrypted and thus not able to be read by the
hypervisor, so use the GHCB CPUID request/response protocol to obtain the
requested CPUID function values and provide these to the guest.
The exception handling support is active during the SEV check and uses the
OVMF temporary RAM space for a stack. After the SEV check is complete, the
exception handling support is removed and the stack pointer cleared.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
OvmfPkg/ResetVector/ResetVector.inf | 3 +
OvmfPkg/ResetVector/Ia32/PageTables64.asm | 275 +++++++++++++++++++++-
OvmfPkg/ResetVector/ResetVector.nasmb | 2 +
3 files changed, 277 insertions(+), 3 deletions(-)
diff --git a/OvmfPkg/ResetVector/ResetVector.inf b/OvmfPkg/ResetVector/ResetVector.inf
index 483fd90fe785..a53ae6c194ae 100644
--- a/OvmfPkg/ResetVector/ResetVector.inf
+++ b/OvmfPkg/ResetVector/ResetVector.inf
@@ -34,9 +34,12 @@ [BuildOptions]
*_*_X64_NASMB_FLAGS = -I$(WORKSPACE)/UefiCpuPkg/ResetVector/Vtf0/
[Pcd]
+ gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaBase
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbBase
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbSize
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbPageTableBase
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbPageTableSize
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesBase
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesSize
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamBase
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamSize
diff --git a/OvmfPkg/ResetVector/Ia32/PageTables64.asm b/OvmfPkg/ResetVector/Ia32/PageTables64.asm
index 9f86ddf6f08f..7c72128a84d6 100644
--- a/OvmfPkg/ResetVector/Ia32/PageTables64.asm
+++ b/OvmfPkg/ResetVector/Ia32/PageTables64.asm
@@ -36,13 +36,58 @@ BITS 32
PAGE_READ_WRITE + \
PAGE_PRESENT)
+;
+; SEV-ES #VC exception handler support
+;
+; #VC handler local variable locations
+;
+%define VC_CPUID_RESULT_EAX 0
+%define VC_CPUID_RESULT_EBX 4
+%define VC_CPUID_RESULT_ECX 8
+%define VC_CPUID_RESULT_EDX 12
+%define VC_GHCB_MSR_EDX 16
+%define VC_GHCB_MSR_EAX 20
+%define VC_CPUID_REQUEST_REGISTER 24
+%define VC_CPUID_FUNCTION 28
+
+; #VC handler total local variable size
+;
+%define VC_VARIABLE_SIZE 32
+
+; #VC handler GHCB CPUID request/response protocol values
+;
+%define GHCB_CPUID_REQUEST 4
+%define GHCB_CPUID_RESPONSE 5
+%define GHCB_CPUID_REGISTER_SHIFT 30
+%define CPUID_INSN_LEN 2
+
+
; Check if Secure Encrypted Virtualization (SEV) feature is enabled
;
-; If SEV is enabled then EAX will be at least 32
+; Modified: EAX, EBX, ECX, EDX, ESP
+;
+; If SEV is enabled then EAX will be at least 32.
; If SEV is disabled then EAX will be zero.
;
CheckSevFeature:
+ ; Set the first byte of the workarea to zero to communicate to the SEC
+ ; phase that SEV-ES is not enabled. If SEV-ES is enabled, the CPUID
+ ; instruction will trigger a #VC exception where the first byte of the
+ ; workarea will be set to one.
+ mov byte[SEV_ES_WORK_AREA], 0
+
+ ;
+ ; Set up exception handlers to check for SEV-ES
+ ; Load temporary RAM stack based on PCDs (see SevEsIdtVmmComm for
+ ; stack usage)
+ ; Establish exception handlers
+ ;
+ mov esp, SEV_ES_VC_TOP_OF_STACK
+ mov eax, ADDR_OF(Idtr)
+ lidt [cs:eax]
+
; Check if we have a valid (0x8000_001F) CPUID leaf
+ ; CPUID raises a #VC exception if running as an SEV-ES guest
mov eax, 0x80000000
cpuid
@@ -53,8 +98,8 @@ CheckSevFeature:
jl NoSev
; Check for memory encryption feature:
- ; CPUID Fn8000_001F[EAX] - Bit 1
- ;
+ ; CPUID Fn8000_001F[EAX] - Bit 1
+ ; CPUID raises a #VC exception if running as an SEV-ES guest
mov eax, 0x8000001f
cpuid
bt eax, 1
@@ -78,6 +123,15 @@ NoSev:
xor eax, eax
SevExit:
+ ;
+ ; Clear exception handlers and stack
+ ;
+ push eax
+ mov eax, ADDR_OF(IdtrClear)
+ lidt [cs:eax]
+ pop eax
+ mov esp, 0
+
OneTimeCallRet CheckSevFeature
; Check if Secure Encrypted Virtualization - Encrypted State (SEV-ES) feature
@@ -222,3 +276,218 @@ SetCr3:
mov cr3, eax
OneTimeCallRet SetCr3ForPageTables64
+
+;
+; Start of #VC exception handling routines
+;
+
+SevEsIdtNotCpuid:
+ ;
+ ; Use VMGEXIT to request termination.
+ ; 1 - #VC was not for CPUID
+ ;
+ mov eax, 1
+ jmp SevEsIdtTerminate
+
+SevEsIdtNoCpuidResponse:
+ ;
+ ; Use VMGEXIT to request termination.
+ ; 2 - GHCB_CPUID_RESPONSE not received
+ ;
+ mov eax, 2
+
+SevEsIdtTerminate:
+ ;
+ ; Use VMGEXIT to request termination. At this point the reason code is
+ ; located in EAX, so shift it left 16 bits to the proper location.
+ ;
+ ; EAX[11:0] => 0x100 - request termination
+ ; EAX[15:12] => 0x1 - OVMF
+ ; EAX[23:16] => 0xXX - REASON CODE
+ ;
+ shl eax, 16
+ or eax, 0x1100
+ xor edx, edx
+ mov ecx, 0xc0010130
+ wrmsr
+ ;
+ ; Issue VMGEXIT - NASM doesn't support the vmmcall instruction in 32-bit
+ ; mode, so work around this by temporarily switching to 64-bit mode.
+ ;
+BITS 64
+ rep vmmcall
+BITS 32
+
+ ;
+ ; We shouldn't come back from the VMGEXIT, but if we do, just loop.
+ ;
+SevEsIdtHlt:
+ hlt
+ jmp SevEsIdtHlt
+ iret
+
+ ;
+ ; Total stack usage for the #VC handler is 44 bytes:
+ ; - 12 bytes for the exception IRET (after popping error code)
+ ; - 32 bytes for the local variables.
+ ;
+SevEsIdtVmmComm:
+ ;
+ ; If we're here, then we are an SEV-ES guest and this
+ ; was triggered by a CPUID instruction
+ ;
+ ; Set the first byte of the workarea to one to communicate to the SEC
+ ; phase that SEV-ES is enabled.
+ mov byte[SEV_ES_WORK_AREA], 1
+
+ pop ecx ; Error code
+ cmp ecx, 0x72 ; Be sure it was CPUID
+ jne SevEsIdtNotCpuid
+
+ ; Set up local variable room on the stack
+ ; CPUID function : + 28
+ ; CPUID request register : + 24
+ ; GHCB MSR (EAX) : + 20
+ ; GHCB MSR (EDX) : + 16
+ ; CPUID result (EDX) : + 12
+ ; CPUID result (ECX) : + 8
+ ; CPUID result (EBX) : + 4
+ ; CPUID result (EAX) : + 0
+ sub esp, VC_VARIABLE_SIZE
+
+ ; Save the CPUID function being requested
+ mov [esp + VC_CPUID_FUNCTION], eax
+
+ ; The GHCB CPUID protocol uses the following mapping to request
+ ; a specific register:
+ ; 0 => EAX, 1 => EBX, 2 => ECX, 3 => EDX
+ ;
+ ; Set EAX as the first register to request. This will also be used as a
+ ; loop variable to request all register values (EAX to EDX).
+ xor eax, eax
+ mov [esp + VC_CPUID_REQUEST_REGISTER], eax
+
+ ; Save current GHCB MSR value
+ mov ecx, 0xc0010130
+ rdmsr
+ mov [esp + VC_GHCB_MSR_EAX], eax
+ mov [esp + VC_GHCB_MSR_EDX], edx
+
+NextReg:
+ ;
+ ; Setup GHCB MSR
+ ; GHCB_MSR[63:32] = CPUID function
+ ; GHCB_MSR[31:30] = CPUID register
+ ; GHCB_MSR[11:0] = CPUID request protocol
+ ;
+ mov eax, [esp + VC_CPUID_REQUEST_REGISTER]
+ cmp eax, 4
+ jge VmmDone
+
+ shl eax, GHCB_CPUID_REGISTER_SHIFT
+ or eax, GHCB_CPUID_REQUEST
+ mov edx, [esp + VC_CPUID_FUNCTION]
+ mov ecx, 0xc0010130
+ wrmsr
+
+ ;
+ ; Issue VMGEXIT - NASM doesn't support the vmmcall instruction in 32-bit
+ ; mode, so work around this by temporarily switching to 64-bit mode.
+ ;
+BITS 64
+ rep vmmcall
+BITS 32
+
+ ;
+ ; Read GHCB MSR
+ ; GHCB_MSR[63:32] = CPUID register value
+ ; GHCB_MSR[31:30] = CPUID register
+ ; GHCB_MSR[11:0] = CPUID response protocol
+ ;
+ mov ecx, 0xc0010130
+ rdmsr
+ mov ecx, eax
+ and ecx, 0xfff
+ cmp ecx, GHCB_CPUID_RESPONSE
+ jne SevEsIdtNoCpuidResponse
+
+ ; Save returned value
+ shr eax, GHCB_CPUID_REGISTER_SHIFT
+ mov [esp + eax * 4], edx
+
+ ; Next register
+ inc word [esp + VC_CPUID_REQUEST_REGISTER]
+
+ jmp NextReg
+
+VmmDone:
+ ;
+ ; At this point we have all CPUID register values. Restore the GHCB MSR,
+ ; set the return register values and return.
+ ;
+ mov eax, [esp + VC_GHCB_MSR_EAX]
+ mov edx, [esp + VC_GHCB_MSR_EDX]
+ mov ecx, 0xc0010130
+ wrmsr
+
+ mov eax, [esp + VC_CPUID_RESULT_EAX]
+ mov ebx, [esp + VC_CPUID_RESULT_EBX]
+ mov ecx, [esp + VC_CPUID_RESULT_ECX]
+ mov edx, [esp + VC_CPUID_RESULT_EDX]
+
+ add esp, VC_VARIABLE_SIZE
+
+ ; Update the EIP value to skip over the now handled CPUID instruction
+ ; (the CPUID instruction has a length of 2)
+ add word [esp], CPUID_INSN_LEN
+ iret
+
+ALIGN 2
+
+Idtr:
+ dw IDT_END - IDT_BASE - 1 ; Limit
+ dd ADDR_OF(IDT_BASE) ; Base
+
+IdtrClear:
+ dw 0 ; Limit
+ dd 0 ; Base
+
+ALIGN 16
+
+;
+; The Interrupt Descriptor Table (IDT)
+; This will be used to determine if SEV-ES is enabled. Upon execution
+; of the CPUID instruction, a VMM Communication Exception will occur.
+; This will tell us if SEV-ES is enabled. We can use the current value
+; of the GHCB MSR to determine the SEV attributes.
+;
+IDT_BASE:
+;
+; Vectors 0 - 28 (No handlers)
+;
+%rep 29
+ dw 0 ; Offset low bits 15..0
+ dw 0x10 ; Selector
+ db 0 ; Reserved
+ db 0x8E ; Gate Type (IA32_IDT_GATE_TYPE_INTERRUPT_32)
+ dw 0 ; Offset high bits 31..16
+%endrep
+;
+; Vector 29 (VMM Communication Exception)
+;
+ dw (ADDR_OF(SevEsIdtVmmComm) & 0xffff) ; Offset low bits 15..0
+ dw 0x10 ; Selector
+ db 0 ; Reserved
+ db 0x8E ; Gate Type (IA32_IDT_GATE_TYPE_INTERRUPT_32)
+ dw (ADDR_OF(SevEsIdtVmmComm) >> 16) ; Offset high bits 31..16
+;
+; Vectors 30 - 31 (No handlers)
+;
+%rep 2
+ dw 0 ; Offset low bits 15..0
+ dw 0x10 ; Selector
+ db 0 ; Reserved
+ db 0x8E ; Gate Type (IA32_IDT_GATE_TYPE_INTERRUPT_32)
+ dw 0 ; Offset high bits 31..16
+%endrep
+IDT_END:
diff --git a/OvmfPkg/ResetVector/ResetVector.nasmb b/OvmfPkg/ResetVector/ResetVector.nasmb
index bfb77e439105..762661115d50 100644
--- a/OvmfPkg/ResetVector/ResetVector.nasmb
+++ b/OvmfPkg/ResetVector/ResetVector.nasmb
@@ -72,6 +72,8 @@
%define GHCB_PT_ADDR (FixedPcdGet32 (PcdOvmfSecGhcbPageTableBase))
%define GHCB_BASE (FixedPcdGet32 (PcdOvmfSecGhcbBase))
%define GHCB_SIZE (FixedPcdGet32 (PcdOvmfSecGhcbSize))
+ %define SEV_ES_WORK_AREA (FixedPcdGet32 (PcdSevEsWorkAreaBase))
+ %define SEV_ES_VC_TOP_OF_STACK (FixedPcdGet32 (PcdOvmfSecPeiTempRamBase) + FixedPcdGet32 (PcdOvmfSecPeiTempRamSize))
%include "Ia32/PageTables64.asm"
%endif
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 34/42] OvmfPkg/Sec: Add #VC exception handling for Sec phase
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (32 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 33/42] OvmfPkg/ResetVector: Add support for a 32-bit SEV check Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 36/42] OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash detection with SEV-ES is enabled Lendacky, Thomas
` (8 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
An SEV-ES guest will generate a #VC exception when it encounters a
non-automatic exit (NAE) event. It is expected that the #VC exception
handler will communicate with the hypervisor using the GHCB to handle
the NAE event.
NAE events can occur during the Sec phase, so initialize exception
handling early in the OVMF Sec support.
Before establishing the exception handling, validate that the supported
version of the SEV-ES protocol in OVMF is supported by the hypervisor.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
OvmfPkg/Sec/SecMain.inf | 4 ++
OvmfPkg/Sec/SecMain.c | 153 ++++++++++++++++++++++++++++++++++++----
2 files changed, 144 insertions(+), 13 deletions(-)
diff --git a/OvmfPkg/Sec/SecMain.inf b/OvmfPkg/Sec/SecMain.inf
index 63ba4cb555fb..7f78dcee2772 100644
--- a/OvmfPkg/Sec/SecMain.inf
+++ b/OvmfPkg/Sec/SecMain.inf
@@ -50,15 +50,19 @@ [LibraryClasses]
PeCoffExtraActionLib
ExtractGuidedSectionLib
LocalApicLib
+ CpuExceptionHandlerLib
[Ppis]
gEfiTemporaryRamSupportPpiGuid # PPI ALWAYS_PRODUCED
[Pcd]
+ gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaBase
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvBase
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvSize
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvBase
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvSize
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbBase
+ gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbSize
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesBase
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamBase
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamSize
diff --git a/OvmfPkg/Sec/SecMain.c b/OvmfPkg/Sec/SecMain.c
index bae9764577f0..1dd185aabc8a 100644
--- a/OvmfPkg/Sec/SecMain.c
+++ b/OvmfPkg/Sec/SecMain.c
@@ -24,6 +24,9 @@
#include <Library/PeCoffExtraActionLib.h>
#include <Library/ExtractGuidedSectionLib.h>
#include <Library/LocalApicLib.h>
+#include <Library/CpuExceptionHandlerLib.h>
+#include <Register/Amd/Ghcb.h>
+#include <Register/Amd/Msr.h>
#include <Ppi/TemporaryRamSupport.h>
@@ -34,6 +37,10 @@ typedef struct _SEC_IDT_TABLE {
IA32_IDT_GATE_DESCRIPTOR IdtTable[SEC_IDT_ENTRY_COUNT];
} SEC_IDT_TABLE;
+typedef struct _SEC_SEV_ES_WORK_AREA {
+ UINT8 SevEsEnabled;
+} SEC_SEV_ES_WORK_AREA;
+
VOID
EFIAPI
SecStartupPhase2 (
@@ -712,6 +719,92 @@ FindAndReportEntryPoints (
return;
}
+STATIC
+VOID
+SevEsProtocolFailure (
+ IN UINT8 ReasonCode
+ )
+{
+ MSR_SEV_ES_GHCB_REGISTER Msr;
+
+ //
+ // Use the GHCB MSR Protocol to request termination by the hypervisor
+ //
+ Msr.GhcbPhysicalAddress = 0;
+ Msr.GhcbTerminate.Function = GHCB_INFO_TERMINATE_REQUEST;
+ Msr.GhcbTerminate.ReasonCodeSet = GHCB_TERMINATE_GHCB;
+ Msr.GhcbTerminate.ReasonCode = ReasonCode;
+ AsmWriteMsr64 (MSR_SEV_ES_GHCB, Msr.GhcbPhysicalAddress);
+
+ AsmVmgExit ();
+
+ ASSERT (FALSE);
+ CpuDeadLoop ();
+}
+
+STATIC
+VOID
+SevEsProtocolCheck (
+ VOID
+ )
+{
+ MSR_SEV_ES_GHCB_REGISTER Msr;
+ GHCB *Ghcb;
+
+ //
+ // Use the GHCB MSR Protocol to obtain the GHCB SEV-ES Information for
+ // protocol checking
+ //
+ Msr.GhcbPhysicalAddress = 0;
+ Msr.GhcbInfo.Function = GHCB_INFO_SEV_INFO_GET;
+ AsmWriteMsr64 (MSR_SEV_ES_GHCB, Msr.GhcbPhysicalAddress);
+
+ AsmVmgExit ();
+
+ Msr.GhcbPhysicalAddress = AsmReadMsr64 (MSR_SEV_ES_GHCB);
+
+ if (Msr.GhcbInfo.Function != GHCB_INFO_SEV_INFO) {
+ SevEsProtocolFailure (GHCB_TERMINATE_GHCB_GENERAL);
+ }
+
+ if (Msr.GhcbProtocol.SevEsProtocolMin > Msr.GhcbProtocol.SevEsProtocolMax) {
+ SevEsProtocolFailure (GHCB_TERMINATE_GHCB_PROTOCOL);
+ }
+
+ if ((Msr.GhcbProtocol.SevEsProtocolMin > GHCB_VERSION_MAX) ||
+ (Msr.GhcbProtocol.SevEsProtocolMax < GHCB_VERSION_MIN)) {
+ SevEsProtocolFailure (GHCB_TERMINATE_GHCB_PROTOCOL);
+ }
+
+ //
+ // SEV-ES protocol checking succeeded, set the initial GHCB address
+ //
+ Msr.GhcbPhysicalAddress = FixedPcdGet32 (PcdOvmfSecGhcbBase);
+ AsmWriteMsr64 (MSR_SEV_ES_GHCB, Msr.GhcbPhysicalAddress);
+
+ Ghcb = Msr.Ghcb;
+ SetMem (Ghcb, sizeof (*Ghcb), 0);
+
+ //
+ // Set the version to the maximum that can be supported
+ //
+ Ghcb->ProtocolVersion = MIN (Msr.GhcbProtocol.SevEsProtocolMax, GHCB_VERSION_MAX);
+ Ghcb->GhcbUsage = GHCB_STANDARD_USAGE;
+}
+
+STATIC
+BOOLEAN
+SevEsIsEnabled (
+ VOID
+ )
+{
+ SEC_SEV_ES_WORK_AREA *SevEsWorkArea;
+
+ SevEsWorkArea = (SEC_SEV_ES_WORK_AREA *) FixedPcdGet32 (PcdSevEsWorkAreaBase);
+
+ return ((SevEsWorkArea != NULL) && (SevEsWorkArea->SevEsEnabled != 0));
+}
+
VOID
EFIAPI
SecCoreStartupWithStack (
@@ -737,8 +830,55 @@ SecCoreStartupWithStack (
Table[Index] = 0;
}
+ //
+ // Initialize IDT - Since this is before library constructors are called,
+ // we use a loop rather than CopyMem.
+ //
+ IdtTableInStack.PeiService = NULL;
+ for (Index = 0; Index < SEC_IDT_ENTRY_COUNT; Index ++) {
+ UINT8 *Src, *Dst;
+ UINTN Byte;
+
+ Src = (UINT8 *) &mIdtEntryTemplate;
+ Dst = (UINT8 *) &IdtTableInStack.IdtTable[Index];
+ for (Byte = 0; Byte < sizeof (mIdtEntryTemplate); Byte++) {
+ Dst[Byte] = Src[Byte];
+ }
+ }
+
+ IdtDescriptor.Base = (UINTN)&IdtTableInStack.IdtTable;
+ IdtDescriptor.Limit = (UINT16)(sizeof (IdtTableInStack.IdtTable) - 1);
+
+ if (SevEsIsEnabled ()) {
+ SevEsProtocolCheck ();
+
+ //
+ // For SEV-ES guests, the exception handler is needed before calling
+ // ProcessLibraryConstructorList() because some of the library constructors
+ // perform some functions that result in #VC exceptions being generated.
+ //
+ // Due to this code executing before library constructors, *all* library
+ // API calls are theoretically interface contract violations. However,
+ // because this is SEC (executing in flash), those constructors cannot
+ // write variables with static storage duration anyway. Furthermore, only
+ // a small, restricted set of APIs, such as AsmWriteIdtr() and
+ // InitializeCpuExceptionHandlers(), are called, where we require that the
+ // underlying library not require constructors to have been invoked and
+ // that the library instance not trigger any #VC exceptions.
+ //
+ AsmWriteIdtr (&IdtDescriptor);
+ InitializeCpuExceptionHandlers (NULL);
+ }
+
ProcessLibraryConstructorList (NULL, NULL);
+ if (!SevEsIsEnabled ()) {
+ //
+ // For non SEV-ES guests, just load the IDTR.
+ //
+ AsmWriteIdtr (&IdtDescriptor);
+ }
+
DEBUG ((EFI_D_INFO,
"SecCoreStartupWithStack(0x%x, 0x%x)\n",
(UINT32)(UINTN)BootFv,
@@ -751,19 +891,6 @@ SecCoreStartupWithStack (
//
InitializeFloatingPointUnits ();
- //
- // Initialize IDT
- //
- IdtTableInStack.PeiService = NULL;
- for (Index = 0; Index < SEC_IDT_ENTRY_COUNT; Index ++) {
- CopyMem (&IdtTableInStack.IdtTable[Index], &mIdtEntryTemplate, sizeof (mIdtEntryTemplate));
- }
-
- IdtDescriptor.Base = (UINTN)&IdtTableInStack.IdtTable;
- IdtDescriptor.Limit = (UINT16)(sizeof (IdtTableInStack.IdtTable) - 1);
-
- AsmWriteIdtr (&IdtDescriptor);
-
#if defined (MDE_CPU_X64)
//
// ASSERT that the Page Tables were set by the reset vector code to
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 36/42] OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash detection with SEV-ES is enabled
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (33 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 34/42] OvmfPkg/Sec: Add #VC exception handling for Sec phase Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 37/42] UefiCpuPkg: Add a 16-bit protected mode code segment descriptor Lendacky, Thomas
` (7 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
The flash detection routine will attempt to determine how the flash
device behaves (e.g. ROM, RAM, Flash). But when SEV-ES is enabled and
the flash device behaves as a ROM device (meaning it is marked read-only
by the hypervisor), this check may result in an infinite nested page fault
because of the attempted write. Since the instruction cannot be emulated
when SEV-ES is enabled, the RIP is never advanced, resulting in repeated
nested page faults.
When SEV-ES is enabled, exit the flash detection early and assume that
the FD behaves as Flash. This will result in QemuFlashWrite() being called
to store EFI variables, which will also result in an infinite nested page
fault when the write is performed. In this case, update QemuFlashWrite()
to use the VmgMmioWrite function from the VmgExitLib library to have the
hypervisor perform the write without having to emulate the instruction.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
.../FvbServicesRuntimeDxe.inf | 2 ++
.../QemuFlash.h | 6 +++++
.../QemuFlash.c | 23 ++++++++++++++++---
.../QemuFlashDxe.c | 15 ++++++++++++
.../QemuFlashSmm.c | 9 ++++++++
5 files changed, 52 insertions(+), 3 deletions(-)
diff --git a/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf b/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
index 72cabba4357d..8bb2325157ea 100644
--- a/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
+++ b/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
@@ -38,6 +38,7 @@ [Sources]
[Packages]
MdePkg/MdePkg.dec
MdeModulePkg/MdeModulePkg.dec
+ UefiCpuPkg/UefiCpuPkg.dec
OvmfPkg/OvmfPkg.dec
[LibraryClasses]
@@ -52,6 +53,7 @@ [LibraryClasses]
UefiBootServicesTableLib
UefiDriverEntryPoint
UefiRuntimeLib
+ VmgExitLib
[Guids]
gEfiEventVirtualAddressChangeGuid # ALWAYS_CONSUMED
diff --git a/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlash.h b/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlash.h
index f1afabcbe6ae..19ac1f733279 100644
--- a/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlash.h
+++ b/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlash.h
@@ -89,5 +89,11 @@ QemuFlashBeforeProbe (
IN UINTN FdBlockCount
);
+VOID
+QemuFlashPtrWrite (
+ IN volatile UINT8 *Ptr,
+ IN UINT8 Value
+ );
+
#endif
diff --git a/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlash.c b/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlash.c
index c81c58972bf2..358bce3336f2 100644
--- a/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlash.c
+++ b/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlash.c
@@ -9,6 +9,7 @@
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
+#include <Library/MemEncryptSevLib.h>
#include <Library/PcdLib.h>
#include "QemuFlash.h"
@@ -80,6 +81,21 @@ QemuFlashDetected (
DEBUG ((EFI_D_INFO, "QEMU Flash: Attempting flash detection at %p\n", Ptr));
+ if (MemEncryptSevEsIsEnabled ()) {
+ //
+ // When SEV-ES is enabled, the check below can result in an infinite
+ // loop with respect to a nested page fault. When the memslot is mapped
+ // read-only, the nested page table entry is read-only. The check below
+ // will cause a nested page fault that cannot be emulated, causing
+ // the instruction to retried over and over. For SEV-ES, acknowledge that
+ // the FD appears as ROM and not as FLASH, but report FLASH anyway because
+ // FLASH behavior can be simulated using VMGEXIT.
+ //
+ DEBUG ((DEBUG_INFO,
+ "QEMU Flash: SEV-ES enabled, assuming FD behaves as FLASH\n"));
+ return TRUE;
+ }
+
OriginalUint8 = *Ptr;
*Ptr = CLEAR_STATUS_CMD;
ProbeUint8 = *Ptr;
@@ -181,8 +197,9 @@ QemuFlashWrite (
//
Ptr = QemuFlashPtr (Lba, Offset);
for (Loop = 0; Loop < *NumBytes; Loop++) {
- *Ptr = WRITE_BYTE_CMD;
- *Ptr = Buffer[Loop];
+ QemuFlashPtrWrite (Ptr, WRITE_BYTE_CMD);
+ QemuFlashPtrWrite (Ptr, Buffer[Loop]);
+
Ptr++;
}
@@ -190,7 +207,7 @@ QemuFlashWrite (
// Restore flash to read mode
//
if (*NumBytes > 0) {
- *(Ptr - 1) = READ_ARRAY_CMD;
+ QemuFlashPtrWrite (Ptr - 1, READ_ARRAY_CMD);
}
return EFI_SUCCESS;
diff --git a/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlashDxe.c b/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlashDxe.c
index 5aabe9d7b59c..83856f575083 100644
--- a/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlashDxe.c
+++ b/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlashDxe.c
@@ -10,6 +10,8 @@
**/
#include <Library/UefiRuntimeLib.h>
+#include <Library/MemEncryptSevLib.h>
+#include <Library/VmgExitLib.h>
#include "QemuFlash.h"
@@ -32,3 +34,16 @@ QemuFlashBeforeProbe (
// Do nothing
//
}
+
+VOID
+QemuFlashPtrWrite (
+ IN volatile UINT8 *Ptr,
+ IN UINT8 Value
+ )
+{
+ if (MemEncryptSevEsIsEnabled ()) {
+ VmgMmioWrite ((UINT8 *) Ptr, &Value, 1);
+ } else {
+ *Ptr = Value;
+ }
+}
diff --git a/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlashSmm.c b/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlashSmm.c
index 7eb426e03855..eff40ae28032 100644
--- a/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlashSmm.c
+++ b/OvmfPkg/QemuFlashFvbServicesRuntimeDxe/QemuFlashSmm.c
@@ -46,3 +46,12 @@ QemuFlashBeforeProbe (
);
ASSERT_EFI_ERROR (Status);
}
+
+VOID
+QemuFlashPtrWrite (
+ IN volatile UINT8 *Ptr,
+ IN UINT8 Value
+ )
+{
+ *Ptr = Value;
+}
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 37/42] UefiCpuPkg: Add a 16-bit protected mode code segment descriptor
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (34 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 36/42] OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash detection with SEV-ES is enabled Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 38/42] UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is enabled Lendacky, Thomas
` (6 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
A hypervisor is not allowed to update an SEV-ES guests register state,
so when booting an SEV-ES guest AP, the hypervisor is not allowed to
set the RIP to the guest requested value. Instead, an SEV-ES AP must be
transition from 64-bit long mode to 16-bit real mode in response to an
INIT-SIPI-SIPI sequence. This requires a 16-bit code segment descriptor.
For PEI, create this descriptor in the reset vector GDT table. For DXE,
create this descriptor from the newly reserved entry at location 0x28.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
UefiCpuPkg/CpuDxe/CpuGdt.h | 4 ++--
UefiCpuPkg/CpuDxe/CpuGdt.c | 8 ++++----
UefiCpuPkg/ResetVector/Vtf0/Ia16/Real16ToFlat32.asm | 9 +++++++++
3 files changed, 15 insertions(+), 6 deletions(-)
diff --git a/UefiCpuPkg/CpuDxe/CpuGdt.h b/UefiCpuPkg/CpuDxe/CpuGdt.h
index 3a0210b2f172..1c94487cbee8 100644
--- a/UefiCpuPkg/CpuDxe/CpuGdt.h
+++ b/UefiCpuPkg/CpuDxe/CpuGdt.h
@@ -36,7 +36,7 @@ struct _GDT_ENTRIES {
GDT_ENTRY LinearCode;
GDT_ENTRY SysData;
GDT_ENTRY SysCode;
- GDT_ENTRY Spare4;
+ GDT_ENTRY SysCode16;
GDT_ENTRY LinearData64;
GDT_ENTRY LinearCode64;
GDT_ENTRY Spare5;
@@ -49,7 +49,7 @@ struct _GDT_ENTRIES {
#define LINEAR_CODE_SEL OFFSET_OF (GDT_ENTRIES, LinearCode)
#define SYS_DATA_SEL OFFSET_OF (GDT_ENTRIES, SysData)
#define SYS_CODE_SEL OFFSET_OF (GDT_ENTRIES, SysCode)
-#define SPARE4_SEL OFFSET_OF (GDT_ENTRIES, Spare4)
+#define SYS_CODE16_SEL OFFSET_OF (GDT_ENTRIES, SysCode16)
#define LINEAR_DATA64_SEL OFFSET_OF (GDT_ENTRIES, LinearData64)
#define LINEAR_CODE64_SEL OFFSET_OF (GDT_ENTRIES, LinearCode64)
#define SPARE5_SEL OFFSET_OF (GDT_ENTRIES, Spare5)
diff --git a/UefiCpuPkg/CpuDxe/CpuGdt.c b/UefiCpuPkg/CpuDxe/CpuGdt.c
index 64efadeba601..a1ab543f2da5 100644
--- a/UefiCpuPkg/CpuDxe/CpuGdt.c
+++ b/UefiCpuPkg/CpuDxe/CpuGdt.c
@@ -70,14 +70,14 @@ STATIC GDT_ENTRIES GdtTemplate = {
0x0,
},
//
- // SPARE4_SEL
+ // SYS_CODE16_SEL
//
{
- 0x0, // limit 15:0
+ 0x0FFFF, // limit 15:0
0x0, // base 15:0
0x0, // base 23:16
- 0x0, // type
- 0x0, // limit 19:16, flags
+ 0x09A, // present, ring 0, code, execute/read
+ 0x08F, // page-granular, 16-bit
0x0, // base 31:24
},
//
diff --git a/UefiCpuPkg/ResetVector/Vtf0/Ia16/Real16ToFlat32.asm b/UefiCpuPkg/ResetVector/Vtf0/Ia16/Real16ToFlat32.asm
index ce4ebfffb688..0e79a3984b16 100644
--- a/UefiCpuPkg/ResetVector/Vtf0/Ia16/Real16ToFlat32.asm
+++ b/UefiCpuPkg/ResetVector/Vtf0/Ia16/Real16ToFlat32.asm
@@ -129,5 +129,14 @@ LINEAR_CODE64_SEL equ $-GDT_BASE
DB 0 ; base 31:24
%endif
+; linear code segment descriptor
+LINEAR_CODE16_SEL equ $-GDT_BASE
+ DW 0xffff ; limit 15:0
+ DW 0 ; base 15:0
+ DB 0 ; base 23:16
+ DB PRESENT_FLAG(1)|DPL(0)|SYSTEM_FLAG(1)|DESC_TYPE(CODE32_TYPE)
+ DB GRANULARITY_FLAG(1)|DEFAULT_SIZE32(0)|CODE64_FLAG(0)|UPPER_LIMIT(0xf)
+ DB 0 ; base 31:24
+
GDT_END:
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 38/42] UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is enabled
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (35 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 37/42] UefiCpuPkg: Add a 16-bit protected mode code segment descriptor Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 39/42] UefiCpuPkg: Allow AP booting under SEV-ES Lendacky, Thomas
` (5 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
When starting APs in an SMP configuration, the AP needs to know if it is
running as an SEV-ES guest in order to assign a GHCB page.
Add a field to the CPU_MP_DATA structure that will indicate if SEV-ES is
enabled. This new field is set during MP library initialization with the
PCD value PcdSevEsIsEnabled. This flag can then be used to determine if
SEV-ES is enabled.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf | 1 +
UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 1 +
UefiCpuPkg/Library/MpInitLib/MpLib.h | 2 ++
UefiCpuPkg/Library/MpInitLib/MpLib.c | 1 +
4 files changed, 5 insertions(+)
diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf b/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
index 45aaa179ff2e..8b0eb1df9594 100644
--- a/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
+++ b/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
@@ -69,5 +69,6 @@ [Pcd]
gUefiCpuPkgTokenSpaceGuid.PcdCpuMicrocodePatchRegionSize ## CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdCpuApLoopMode ## CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdCpuApTargetCstate ## SOMETIMES_CONSUMES
+ gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled ## CONSUMES
gEfiMdeModulePkgTokenSpaceGuid.PcdCpuStackGuard ## CONSUMES
diff --git a/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf b/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
index d78d328b4252..b4dc7e69d829 100644
--- a/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
+++ b/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
@@ -60,6 +60,7 @@ [Pcd]
gUefiCpuPkgTokenSpaceGuid.PcdCpuMicrocodePatchRegionSize ## CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdCpuApLoopMode ## CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdCpuApTargetCstate ## SOMETIMES_CONSUMES
+ gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled ## CONSUMES
[Ppis]
gEdkiiPeiShadowMicrocodePpiGuid ## SOMETIMES_CONSUMES
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h b/UefiCpuPkg/Library/MpInitLib/MpLib.h
index 0c89f8a6e732..edd936f06396 100755
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
@@ -275,6 +275,8 @@ struct _CPU_MP_DATA {
// driver.
//
BOOLEAN WakeUpByInitSipiSipi;
+
+ BOOLEAN SevEsIsEnabled;
};
extern EFI_GUID mCpuInitMpLibHobGuid;
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index 64a4c3546e22..81c5b1a5b701 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -1714,6 +1714,7 @@ MpInitLibInitialize (
CpuMpData->CpuData = (CPU_AP_DATA *) (CpuMpData + 1);
CpuMpData->CpuInfoInHob = (UINT64) (UINTN) (CpuMpData->CpuData + MaxLogicalProcessorNumber);
InitializeSpinLock(&CpuMpData->MpLock);
+ CpuMpData->SevEsIsEnabled = PcdGetBool (PcdSevEsIsEnabled);
//
// Make sure no memory usage outside of the allocated buffer.
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 39/42] UefiCpuPkg: Allow AP booting under SEV-ES
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (36 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 38/42] UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is enabled Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 40/42] OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector Lendacky, Thomas
` (4 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Typically, an AP is booted using the INIT-SIPI-SIPI sequence. This
sequence is intercepted by the hypervisor, which sets the AP's registers
to the values requested by the sequence. At that point, the hypervisor can
start the AP, which will then begin execution at the appropriate location.
Under SEV-ES, AP booting presents some challenges since the hypervisor is
not allowed to alter the AP's register state. In this situation, we have
to distinguish between the AP's first boot and AP's subsequent boots.
First boot:
Once the AP's register state has been defined (which is before the guest
is first booted) it cannot be altered. Should the hypervisor attempt to
alter the register state, the change would be detected by the hardware
and the VMRUN instruction would fail. Given this, the first boot for the
AP is required to begin execution with this initial register state, which
is typically the reset vector. This prevents the BSP from directing the
AP startup location through the INIT-SIPI-SIPI sequence.
To work around this, the firmware will provide a build time reserved area
that can be used as the initial IP value. The hypervisor can extract this
location value by checking for the SEV-ES reset block GUID that must be
located 48-bytes from the end of the firmware. The format of the SEV-ES
reset block area is:
0x00 - 0x01 - SEV-ES Reset IP
0x02 - 0x03 - SEV-ES Reset CS Segment Base[31:16]
0x04 - 0x05 - Size of the SEV-ES reset block
0x06 - 0x15 - SEV-ES Reset Block GUID
(00f771de-1a7e-4fcb-890e-68c77e2fb44e)
The total size is 22 bytes. Any expansion to this block must be done
by adding new values before existing values.
The hypervisor will use the IP and CS values obtained from the SEV-ES
reset block to set as the AP's initial values. The CS Segment Base
represents the upper 16 bits of the CS segment base and must be left
shifted by 16 bits to form the complete CS segment base value.
Before booting the AP for the first time, the BSP must initialize the
SEV-ES reset area. This consists of programming a FAR JMP instruction
to the contents of a memory location that is also located in the SEV-ES
reset area. The BSP must program the IP and CS values for the FAR JMP
based on values drived from the INIT-SIPI-SIPI sequence.
Subsequent boots:
Again, the hypervisor cannot alter the AP register state, so a method is
required to take the AP out of halt state and redirect it to the desired
IP location. If it is determined that the AP is running in an SEV-ES
guest, then instead of calling CpuSleep(), a VMGEXIT is issued with the
AP Reset Hold exit code (0x80000004). The hypervisor will put the AP in
a halt state, waiting for an INIT-SIPI-SIPI sequence. Once the sequence
is recognized, the hypervisor will resume the AP. At this point the AP
must transition from the current 64-bit long mode down to 16-bit real
mode and begin executing at the derived location from the INIT-SIPI-SIPI
sequence.
Another change is around the area of obtaining the (x2)APIC ID during AP
startup. During AP startup, the AP can't take a #VC exception before the
AP has established a stack. However, the AP stack is set by using the
(x2)APIC ID, which is obtained through CPUID instructions. A CPUID
instruction will cause a #VC, so a different method must be used. The
GHCB protocol supports a method to obtain CPUID information from the
hypervisor through the GHCB MSR. This method does not require a stack,
so it is used to obtain the necessary CPUID information to determine the
(x2)APIC ID.
The new 16-bit protected mode GDT entry is used in order to transition
from 64-bit long mode down to 16-bit real mode.
A new assembler routine is created that takes the AP from 64-bit long mode
to 16-bit real mode. This is located under 1MB in memory and transitions
from 64-bit long mode to 32-bit compatibility mode to 16-bit protected
mode and finally 16-bit real mode.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf | 3 +
UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 3 +
UefiCpuPkg/Library/MpInitLib/MpLib.h | 60 ++++
UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 70 ++++-
UefiCpuPkg/Library/MpInitLib/MpLib.c | 256 +++++++++++++++++-
UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 19 ++
UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c | 2 +-
UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc | 2 +-
.../Library/MpInitLib/Ia32/MpFuncs.nasm | 15 +
UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc | 4 +-
UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 239 ++++++++++++++++
11 files changed, 659 insertions(+), 14 deletions(-)
diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf b/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
index 8b0eb1df9594..12c175608c3a 100644
--- a/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
+++ b/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
@@ -51,6 +51,7 @@ [LibraryClasses]
UefiBootServicesTableLib
DebugAgentLib
SynchronizationLib
+ VmgExitLib
[Protocols]
gEfiTimerArchProtocolGuid ## SOMETIMES_CONSUMES
@@ -70,5 +71,7 @@ [Pcd]
gUefiCpuPkgTokenSpaceGuid.PcdCpuApLoopMode ## CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdCpuApTargetCstate ## SOMETIMES_CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled ## CONSUMES
+ gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaBase ## SOMETIMES_CONSUMES
gEfiMdeModulePkgTokenSpaceGuid.PcdCpuStackGuard ## CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase ## CONSUMES
diff --git a/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf b/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
index b4dc7e69d829..c684bb4812c1 100644
--- a/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
+++ b/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
@@ -50,6 +50,7 @@ [LibraryClasses]
UefiCpuLib
SynchronizationLib
PeiServicesLib
+ VmgExitLib
[Pcd]
gUefiCpuPkgTokenSpaceGuid.PcdCpuMaxLogicalProcessorNumber ## CONSUMES
@@ -61,6 +62,8 @@ [Pcd]
gUefiCpuPkgTokenSpaceGuid.PcdCpuApLoopMode ## CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdCpuApTargetCstate ## SOMETIMES_CONSUMES
gUefiCpuPkgTokenSpaceGuid.PcdSevEsIsEnabled ## CONSUMES
+ gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaBase ## SOMETIMES_CONSUMES
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase ## CONSUMES
[Ppis]
gEdkiiPeiShadowMicrocodePpiGuid ## SOMETIMES_CONSUMES
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h b/UefiCpuPkg/Library/MpInitLib/MpLib.h
index edd936f06396..56bfd9cc253c 100755
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
@@ -172,6 +172,11 @@ typedef struct {
UINT8 *RelocateApLoopFuncAddress;
UINTN RelocateApLoopFuncSize;
UINTN ModeTransitionOffset;
+ UINTN SwitchToRealSize;
+ UINTN SwitchToRealOffset;
+ UINTN SwitchToRealNoNxOffset;
+ UINTN SwitchToRealPM16ModeOffset;
+ UINTN SwitchToRealPM16ModeSize;
} MP_ASSEMBLY_ADDRESS_MAP;
typedef struct _CPU_MP_DATA CPU_MP_DATA;
@@ -210,6 +215,8 @@ typedef struct {
// Enable5LevelPaging indicates whether 5-level paging is enabled in long mode.
//
BOOLEAN Enable5LevelPaging;
+ BOOLEAN SevEsIsEnabled;
+ UINTN GhcbBase;
} MP_CPU_EXCHANGE_INFO;
#pragma pack()
@@ -256,6 +263,7 @@ struct _CPU_MP_DATA {
UINT8 ApLoopMode;
UINT8 ApTargetCState;
UINT16 PmCodeSegment;
+ UINT16 Pm16CodeSegment;
CPU_AP_DATA *CpuData;
volatile MP_CPU_EXCHANGE_INFO *MpCpuExchangeInfo;
@@ -277,8 +285,47 @@ struct _CPU_MP_DATA {
BOOLEAN WakeUpByInitSipiSipi;
BOOLEAN SevEsIsEnabled;
+ UINTN SevEsAPBuffer;
+ UINTN SevEsAPResetStackStart;
+ CPU_MP_DATA *NewCpuMpData;
+
+ UINT64 GhcbBase;
};
+#define AP_RESET_STACK_SIZE 64
+
+#pragma pack(1)
+
+typedef struct {
+ UINT8 InsnBuffer[8];
+ UINT16 Rip;
+ UINT16 Segment;
+} SEV_ES_AP_JMP_FAR;
+
+#pragma pack()
+
+/**
+ Assembly code to move an AP from long mode to real mode.
+
+ Move an AP from long mode to real mode in preparation to invoking
+ the reset vector. This is used for SEV-ES guests where a hypervisor
+ is not allowed to set the CS and RIP to point to the reset vector.
+
+ @param[in] BufferStart The reset vector target.
+ @param[in] Code16 16-bit protected mode code segment value.
+ @param[in] Code32 32-bit protected mode code segment value.
+ @param[in] StackStart The start of a stack to be used for transitioning
+ from long mode to real mode.
+**/
+typedef
+VOID
+(EFIAPI AP_RESET) (
+ IN UINTN BufferStart,
+ IN UINT16 Code16,
+ IN UINT16 Code32,
+ IN UINTN StackStart
+ );
+
extern EFI_GUID mCpuInitMpLibHobGuid;
/**
@@ -384,6 +431,19 @@ GetModeTransitionBuffer (
IN UINTN BufferSize
);
+/**
+ Return the address of the SEV-ES AP jump table.
+
+ This buffer is required in order for an SEV-ES guest to transition from
+ UEFI into an OS.
+
+ @retval other Return SEV-ES AP jump table buffer
+**/
+UINTN
+GetSevEsAPMemory (
+ VOID
+ );
+
/**
This function will be called by BSP to wakeup AP.
diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
index a987c3210957..8510a13145f3 100644
--- a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
@@ -12,6 +12,8 @@
#include <Library/UefiBootServicesTableLib.h>
#include <Library/DebugAgentLib.h>
#include <Library/DxeServicesTableLib.h>
+#include <Register/Amd/Fam17Msr.h>
+#include <Register/Amd/Ghcb.h>
#include <Protocol/Timer.h>
@@ -145,6 +147,39 @@ GetModeTransitionBuffer (
return (UINTN)StartAddress;
}
+/**
+ Return the address of the SEV-ES AP jump table.
+
+ This buffer is required in order for an SEV-ES guest to transition from
+ UEFI into an OS.
+
+ @retval other Return SEV-ES AP jump table buffer
+**/
+UINTN
+GetSevEsAPMemory (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS StartAddress;
+
+ //
+ // Allocate 1 page for AP jump table page
+ //
+ StartAddress = BASE_4GB - 1;
+ Status = gBS->AllocatePages (
+ AllocateMaxAddress,
+ EfiReservedMemoryType,
+ 1,
+ &StartAddress
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ DEBUG ((DEBUG_INFO, "Dxe: SevEsAPMemory = %lx\n", (UINTN) StartAddress));
+
+ return (UINTN) StartAddress;
+}
+
/**
Checks APs status and updates APs status if needed.
@@ -219,6 +254,38 @@ CheckApsStatus (
}
}
+/**
+ Get Protected mode code segment with 16-bit default addressing
+ from current GDT table.
+
+ @return Protected mode 16-bit code segment value.
+**/
+UINT16
+GetProtectedMode16CS (
+ VOID
+ )
+{
+ IA32_DESCRIPTOR GdtrDesc;
+ IA32_SEGMENT_DESCRIPTOR *GdtEntry;
+ UINTN GdtEntryCount;
+ UINT16 Index;
+
+ Index = (UINT16) -1;
+ AsmReadGdtr (&GdtrDesc);
+ GdtEntryCount = (GdtrDesc.Limit + 1) / sizeof (IA32_SEGMENT_DESCRIPTOR);
+ GdtEntry = (IA32_SEGMENT_DESCRIPTOR *) GdtrDesc.Base;
+ for (Index = 0; Index < GdtEntryCount; Index++) {
+ if (GdtEntry->Bits.L == 0) {
+ if (GdtEntry->Bits.Type > 8 && GdtEntry->Bits.DB == 0) {
+ break;
+ }
+ }
+ GdtEntry++;
+ }
+ ASSERT (Index != GdtEntryCount);
+ return Index * 8;
+}
+
/**
Get Protected mode code segment from current GDT table.
@@ -239,7 +306,7 @@ GetProtectedModeCS (
GdtEntry = (IA32_SEGMENT_DESCRIPTOR *) GdtrDesc.Base;
for (Index = 0; Index < GdtEntryCount; Index++) {
if (GdtEntry->Bits.L == 0) {
- if (GdtEntry->Bits.Type > 8 && GdtEntry->Bits.L == 0) {
+ if (GdtEntry->Bits.Type > 8 && GdtEntry->Bits.DB == 1) {
break;
}
}
@@ -301,6 +368,7 @@ MpInitChangeApLoopCallback (
CpuMpData = GetCpuMpData ();
CpuMpData->PmCodeSegment = GetProtectedModeCS ();
+ CpuMpData->Pm16CodeSegment = GetProtectedMode16CS ();
CpuMpData->ApLoopMode = PcdGet8 (PcdCpuApLoopMode);
mNumberToFinish = CpuMpData->CpuCount - 1;
WakeUpAP (CpuMpData, TRUE, 0, RelocateApLoop, NULL, TRUE);
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index 81c5b1a5b701..6b83eee7adad 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -9,6 +9,9 @@
**/
#include "MpLib.h"
+#include <Library/VmgExitLib.h>
+#include <Register/Amd/Fam17Msr.h>
+#include <Register/Amd/Ghcb.h>
EFI_GUID mCpuInitMpLibHobGuid = CPU_INIT_MP_LIB_HOB_GUID;
@@ -314,6 +317,14 @@ GetApLoopMode (
//
ApLoopMode = ApInHltLoop;
}
+
+ if (PcdGetBool (PcdSevEsIsEnabled)) {
+ //
+ // For SEV-ES, force AP in Hlt-loop mode in order to use the GHCB
+ // protocol for starting APs
+ //
+ ApLoopMode = ApInHltLoop;
+ }
}
if (ApLoopMode != ApInMwaitLoop) {
@@ -610,6 +621,108 @@ InitializeApData (
SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateIdle);
}
+/**
+ Get Protected mode code segment with 16-bit default addressing
+ from current GDT table.
+
+ @return Protected mode 16-bit code segment value.
+**/
+STATIC
+UINT16
+GetProtectedMode16CS (
+ VOID
+ )
+{
+ IA32_DESCRIPTOR GdtrDesc;
+ IA32_SEGMENT_DESCRIPTOR *GdtEntry;
+ UINTN GdtEntryCount;
+ UINT16 Index;
+
+ Index = (UINT16) -1;
+ AsmReadGdtr (&GdtrDesc);
+ GdtEntryCount = (GdtrDesc.Limit + 1) / sizeof (IA32_SEGMENT_DESCRIPTOR);
+ GdtEntry = (IA32_SEGMENT_DESCRIPTOR *) GdtrDesc.Base;
+ for (Index = 0; Index < GdtEntryCount; Index++) {
+ if (GdtEntry->Bits.L == 0 &&
+ GdtEntry->Bits.DB == 0 &&
+ GdtEntry->Bits.Type > 8) {
+ break;
+ }
+ GdtEntry++;
+ }
+ ASSERT (Index != GdtEntryCount);
+ return Index * 8;
+}
+
+/**
+ Get Protected mode code segment with 32-bit default addressing
+ from current GDT table.
+
+ @return Protected mode 32-bit code segment value.
+**/
+STATIC
+UINT16
+GetProtectedMode32CS (
+ VOID
+ )
+{
+ IA32_DESCRIPTOR GdtrDesc;
+ IA32_SEGMENT_DESCRIPTOR *GdtEntry;
+ UINTN GdtEntryCount;
+ UINT16 Index;
+
+ Index = (UINT16) -1;
+ AsmReadGdtr (&GdtrDesc);
+ GdtEntryCount = (GdtrDesc.Limit + 1) / sizeof (IA32_SEGMENT_DESCRIPTOR);
+ GdtEntry = (IA32_SEGMENT_DESCRIPTOR *) GdtrDesc.Base;
+ for (Index = 0; Index < GdtEntryCount; Index++) {
+ if (GdtEntry->Bits.L == 0 &&
+ GdtEntry->Bits.DB == 1 &&
+ GdtEntry->Bits.Type > 8) {
+ break;
+ }
+ GdtEntry++;
+ }
+ ASSERT (Index != GdtEntryCount);
+ return Index * 8;
+}
+
+/**
+ Reset an AP when in SEV-ES mode.
+
+ @retval EFI_DEVICE_ERROR Reset of AP failed.
+**/
+STATIC
+VOID
+MpInitLibSevEsAPReset (
+ GHCB *Ghcb,
+ CPU_MP_DATA *CpuMpData
+ )
+{
+ UINT16 Code16, Code32;
+ AP_RESET *APResetFn;
+ UINTN BufferStart;
+ UINTN StackStart;
+
+ Code16 = GetProtectedMode16CS ();
+ Code32 = GetProtectedMode32CS ();
+
+ if (CpuMpData->WakeupBufferHigh != 0) {
+ APResetFn = (AP_RESET *) (CpuMpData->WakeupBufferHigh + CpuMpData->AddressMap.SwitchToRealNoNxOffset);
+ } else {
+ APResetFn = (AP_RESET *) (CpuMpData->MpCpuExchangeInfo->BufferStart + CpuMpData->AddressMap.SwitchToRealOffset);
+ }
+
+ BufferStart = CpuMpData->MpCpuExchangeInfo->BufferStart;
+ StackStart = CpuMpData->SevEsAPResetStackStart -
+ (AP_RESET_STACK_SIZE * GetApicId ());
+
+ //
+ // This call never returns.
+ //
+ APResetFn (BufferStart, Code16, Code32, StackStart);
+}
+
/**
This function will be called from AP reset code if BSP uses WakeUpAP.
@@ -765,7 +878,28 @@ ApWakeupFunction (
//
while (TRUE) {
DisableInterrupts ();
- CpuSleep ();
+ if (CpuMpData->SevEsIsEnabled) {
+ MSR_SEV_ES_GHCB_REGISTER Msr;
+ GHCB *Ghcb;
+
+ Msr.GhcbPhysicalAddress = AsmReadMsr64 (MSR_SEV_ES_GHCB);
+ Ghcb = Msr.Ghcb;
+
+ VmgInit (Ghcb);
+ VmgExit (Ghcb, SvmExitApResetHold, 0, 0);
+ /*TODO: Check return value to verify SIPI issued */
+
+ //
+ // Awakened in a new phase? Use the new CpuMpData
+ //
+ if (CpuMpData->NewCpuMpData) {
+ CpuMpData = CpuMpData->NewCpuMpData;
+ }
+
+ MpInitLibSevEsAPReset (Ghcb, CpuMpData);
+ } else {
+ CpuSleep ();
+ }
CpuPause ();
}
}
@@ -878,6 +1012,9 @@ FillExchangeInfoData (
ExchangeInfo->Enable5LevelPaging = (BOOLEAN) (Cr4.Bits.LA57 == 1);
DEBUG ((DEBUG_INFO, "%a: 5-Level Paging = %d\n", gEfiCallerBaseName, ExchangeInfo->Enable5LevelPaging));
+ ExchangeInfo->SevEsIsEnabled = CpuMpData->SevEsIsEnabled;
+ ExchangeInfo->GhcbBase = CpuMpData->GhcbBase;
+
//
// Get the BSP's data of GDT and IDT
//
@@ -904,8 +1041,9 @@ FillExchangeInfoData (
// EfiBootServicesCode to avoid page fault if NX memory protection is enabled.
//
if (CpuMpData->WakeupBufferHigh != 0) {
- Size = CpuMpData->AddressMap.RendezvousFunnelSize -
- CpuMpData->AddressMap.ModeTransitionOffset;
+ Size = CpuMpData->AddressMap.RendezvousFunnelSize +
+ CpuMpData->AddressMap.SwitchToRealSize -
+ CpuMpData->AddressMap.ModeTransitionOffset;
CopyMem (
(VOID *)CpuMpData->WakeupBufferHigh,
CpuMpData->AddressMap.RendezvousFunnelAddress +
@@ -958,7 +1096,8 @@ BackupAndPrepareWakeupBuffer(
CopyMem (
(VOID *) CpuMpData->WakeupBuffer,
(VOID *) CpuMpData->AddressMap.RendezvousFunnelAddress,
- CpuMpData->AddressMap.RendezvousFunnelSize
+ CpuMpData->AddressMap.RendezvousFunnelSize +
+ CpuMpData->AddressMap.SwitchToRealSize
);
}
@@ -979,6 +1118,40 @@ RestoreWakeupBuffer(
);
}
+/**
+ Calculate the size of the reset stack.
+**/
+STATIC
+UINTN
+GetApResetStackSize (
+ VOID
+ )
+{
+ return AP_RESET_STACK_SIZE * PcdGet32(PcdCpuMaxLogicalProcessorNumber);
+}
+
+/**
+ Calculate the size of the reset vector.
+
+ @param[in] AddressMap The pointer to Address Map structure.
+**/
+STATIC
+UINTN
+GetApResetVectorSize (
+ IN MP_ASSEMBLY_ADDRESS_MAP *AddressMap
+ )
+{
+ UINTN Size;
+
+ Size = ALIGN_VALUE (AddressMap->RendezvousFunnelSize +
+ AddressMap->SwitchToRealSize +
+ sizeof (MP_CPU_EXCHANGE_INFO),
+ CPU_STACK_ALIGNMENT);
+ Size += GetApResetStackSize ();
+
+ return Size;
+}
+
/**
Allocate reset vector buffer.
@@ -992,16 +1165,22 @@ AllocateResetVector (
UINTN ApResetVectorSize;
if (CpuMpData->WakeupBuffer == (UINTN) -1) {
- ApResetVectorSize = CpuMpData->AddressMap.RendezvousFunnelSize +
- sizeof (MP_CPU_EXCHANGE_INFO);
+ ApResetVectorSize = GetApResetVectorSize (&CpuMpData->AddressMap);
CpuMpData->WakeupBuffer = GetWakeupBuffer (ApResetVectorSize);
CpuMpData->MpCpuExchangeInfo = (MP_CPU_EXCHANGE_INFO *) (UINTN)
- (CpuMpData->WakeupBuffer + CpuMpData->AddressMap.RendezvousFunnelSize);
+ (CpuMpData->WakeupBuffer +
+ CpuMpData->AddressMap.RendezvousFunnelSize +
+ CpuMpData->AddressMap.SwitchToRealSize);
CpuMpData->WakeupBufferHigh = GetModeTransitionBuffer (
- CpuMpData->AddressMap.RendezvousFunnelSize -
+ CpuMpData->AddressMap.RendezvousFunnelSize +
+ CpuMpData->AddressMap.SwitchToRealSize -
CpuMpData->AddressMap.ModeTransitionOffset
);
+ //
+ // The reset stack starts at the end of the buffer.
+ //
+ CpuMpData->SevEsAPResetStackStart = CpuMpData->WakeupBuffer + ApResetVectorSize;
}
BackupAndPrepareWakeupBuffer (CpuMpData);
}
@@ -1016,7 +1195,31 @@ FreeResetVector (
IN CPU_MP_DATA *CpuMpData
)
{
- RestoreWakeupBuffer (CpuMpData);
+ //
+ // If SEV-ES is enabled, the reset area is needed for AP parking and
+ // and AP startup in the OS, so the reset area is reserved. Do not
+ // perform the restore as this will overwrite memory which has data
+ // needed by SEV-ES.
+ //
+ if (!CpuMpData->SevEsIsEnabled) {
+ RestoreWakeupBuffer (CpuMpData);
+ }
+}
+
+/**
+ Allocate the SEV-ES AP jump table buffer.
+
+ @param[in, out] CpuMpData The pointer to CPU MP Data structure.
+**/
+VOID
+AllocateSevEsAPMemory (
+ IN OUT CPU_MP_DATA *CpuMpData
+ )
+{
+ if (CpuMpData->SevEsAPBuffer == (UINTN) -1) {
+ CpuMpData->SevEsAPBuffer =
+ CpuMpData->SevEsIsEnabled ? GetSevEsAPMemory () : 0;
+ }
}
/**
@@ -1053,6 +1256,7 @@ WakeUpAP (
CpuMpData->InitFlag != ApInitDone) {
ResetVectorRequired = TRUE;
AllocateResetVector (CpuMpData);
+ AllocateSevEsAPMemory (CpuMpData);
FillExchangeInfoData (CpuMpData);
SaveLocalApicTimerSetting (CpuMpData);
}
@@ -1089,6 +1293,35 @@ WakeUpAP (
}
}
if (ResetVectorRequired) {
+ //
+ // For SEV-ES, the initial AP boot address will be defined by
+ // PcdSevEsWorkAreaBase. The Segment/Rip must be the jump address
+ // from the original INIT-SIPI-SIPI.
+ //
+ if (CpuMpData->SevEsIsEnabled) {
+ SEV_ES_AP_JMP_FAR *JmpFar;
+ UINT32 Offset, InsnByte;
+ UINT8 LoNib, HiNib;
+
+ JmpFar = (SEV_ES_AP_JMP_FAR *) FixedPcdGet32 (PcdSevEsWorkAreaBase);
+ ASSERT (JmpFar != NULL);
+
+ Offset = FixedPcdGet32 (PcdSevEsWorkAreaBase);
+ Offset += sizeof (JmpFar->InsnBuffer);
+ LoNib = (UINT8) Offset;
+ HiNib = (UINT8) (Offset >> 8);
+
+ // JMP FAR [CS:XXYY] => 2E FF 2E YY XX
+ InsnByte = 0;
+ JmpFar->InsnBuffer[InsnByte++] = 0x2E; // CS override prefix
+ JmpFar->InsnBuffer[InsnByte++] = 0xFF; // JMP (FAR)
+ JmpFar->InsnBuffer[InsnByte++] = 0x2E; // ModRM (JMP memory location)
+ JmpFar->InsnBuffer[InsnByte++] = LoNib; // YY offset ...
+ JmpFar->InsnBuffer[InsnByte++] = HiNib; // XX offset ...
+
+ JmpFar->Rip = 0;
+ JmpFar->Segment = (UINT16) (ExchangeInfo->BufferStart >> 4);
+ }
//
// Wakeup all APs
//
@@ -1656,7 +1889,7 @@ MpInitLibInitialize (
ASSERT (MaxLogicalProcessorNumber != 0);
AsmGetAddressMap (&AddressMap);
- ApResetVectorSize = AddressMap.RendezvousFunnelSize + sizeof (MP_CPU_EXCHANGE_INFO);
+ ApResetVectorSize = GetApResetVectorSize (&AddressMap);
ApStackSize = PcdGet32(PcdCpuApStackSize);
ApLoopMode = GetApLoopMode (&MonitorFilterSize);
@@ -1715,6 +1948,8 @@ MpInitLibInitialize (
CpuMpData->CpuInfoInHob = (UINT64) (UINTN) (CpuMpData->CpuData + MaxLogicalProcessorNumber);
InitializeSpinLock(&CpuMpData->MpLock);
CpuMpData->SevEsIsEnabled = PcdGetBool (PcdSevEsIsEnabled);
+ CpuMpData->SevEsAPBuffer = (UINTN) -1;
+ CpuMpData->GhcbBase = PcdGet64 (PcdGhcbBase);
//
// Make sure no memory usage outside of the allocated buffer.
@@ -1773,6 +2008,7 @@ MpInitLibInitialize (
// APs have been wakeup before, just get the CPU Information
// from HOB
//
+ OldCpuMpData->NewCpuMpData = CpuMpData;
CpuMpData->CpuCount = OldCpuMpData->CpuCount;
CpuMpData->BspNumber = OldCpuMpData->BspNumber;
CpuMpData->CpuInfoInHob = OldCpuMpData->CpuInfoInHob;
diff --git a/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c b/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
index 17b60903c5a6..36f7764d5fe8 100644
--- a/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
@@ -280,6 +280,25 @@ GetModeTransitionBuffer (
return 0;
}
+/**
+ Return the address of the SEV-ES AP jump table.
+
+ This buffer is required in order for an SEV-ES guest to transition from
+ UEFI into an OS.
+
+ @retval other Return SEV-ES AP jump table buffer
+**/
+UINTN
+GetSevEsAPMemory (
+ VOID
+ )
+{
+ //
+ // PEI phase doesn't need to do such transition. So simply return 0.
+ //
+ return 0;
+}
+
/**
Checks APs status and updates APs status if needed.
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c b/UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c
index 6298571e29b2..28f8e8e133e5 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c
@@ -121,7 +121,7 @@ GetProtectedModeCS (
GdtEntry = (IA32_SEGMENT_DESCRIPTOR *) GdtrDesc.Base;
for (Index = 0; Index < GdtEntryCount; Index++) {
if (GdtEntry->Bits.L == 0) {
- if (GdtEntry->Bits.Type > 8 && GdtEntry->Bits.L == 0) {
+ if (GdtEntry->Bits.Type > 8 && GdtEntry->Bits.DB == 1) {
break;
}
}
diff --git a/UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc b/UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc
index efb1bc2bf7cb..4f5a7c859a56 100644
--- a/UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc
+++ b/UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc
@@ -19,7 +19,7 @@ CPU_SWITCH_STATE_IDLE equ 0
CPU_SWITCH_STATE_STORED equ 1
CPU_SWITCH_STATE_LOADED equ 2
-LockLocation equ (RendezvousFunnelProcEnd - RendezvousFunnelProcStart)
+LockLocation equ (SwitchToRealProcEnd - RendezvousFunnelProcStart)
StackStartAddressLocation equ LockLocation + 04h
StackSizeLocation equ LockLocation + 08h
ApProcedureLocation equ LockLocation + 0Ch
diff --git a/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm b/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm
index b74046b76af3..309d53bf3b37 100644
--- a/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm
+++ b/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm
@@ -215,6 +215,16 @@ CProcedureInvoke:
jmp $ ; Never reach here
RendezvousFunnelProcEnd:
+;-------------------------------------------------------------------------------------
+;SwitchToRealProc procedure follows.
+;NOT USED IN 32 BIT MODE.
+;-------------------------------------------------------------------------------------
+global ASM_PFX(SwitchToRealProc)
+ASM_PFX(SwitchToRealProc):
+SwitchToRealProcStart:
+ jmp $ ; Never reach here
+SwitchToRealProcEnd:
+
;-------------------------------------------------------------------------------------
; AsmRelocateApLoop (MwaitSupport, ApTargetCState, PmCodeSegment, TopOfApStack, CountTofinish);
;-------------------------------------------------------------------------------------
@@ -263,6 +273,11 @@ ASM_PFX(AsmGetAddressMap):
mov dword [ebx + 0Ch], AsmRelocateApLoopStart
mov dword [ebx + 10h], AsmRelocateApLoopEnd - AsmRelocateApLoopStart
mov dword [ebx + 14h], Flat32Start - RendezvousFunnelProcStart
+ mov dword [ebx + 18h], SwitchToRealProcEnd - SwitchToRealProcStart ; SwitchToRealSize
+ mov dword [ebx + 1Ch], SwitchToRealProcStart - RendezvousFunnelProcStart ; SwitchToRealOffset
+ mov dword [ebx + 20h], SwitchToRealProcStart - Flat32Start ; SwitchToRealNoNxOffset
+ mov dword [ebx + 24h], 0 ; SwitchToRealPM16ModeOffset
+ mov dword [ebx + 28h], 0 ; SwitchToRealPM16ModeSize
popad
ret
diff --git a/UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc b/UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc
index 58ef369342a7..c92daaaffd6b 100644
--- a/UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc
+++ b/UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc
@@ -19,7 +19,7 @@ CPU_SWITCH_STATE_IDLE equ 0
CPU_SWITCH_STATE_STORED equ 1
CPU_SWITCH_STATE_LOADED equ 2
-LockLocation equ (RendezvousFunnelProcEnd - RendezvousFunnelProcStart)
+LockLocation equ (SwitchToRealProcEnd - RendezvousFunnelProcStart)
StackStartAddressLocation equ LockLocation + 08h
StackSizeLocation equ LockLocation + 10h
ApProcedureLocation equ LockLocation + 18h
@@ -41,3 +41,5 @@ ModeTransitionSegmentLocation equ LockLocation + 98h
ModeHighMemoryLocation equ LockLocation + 9Ah
ModeHighSegmentLocation equ LockLocation + 9Eh
Enable5LevelPagingLocation equ LockLocation + 0A0h
+SevEsIsEnabledLocation equ LockLocation + 0A1h
+GhcbBaseLocation equ LockLocation + 0A2h
diff --git a/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm b/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
index 87f2523e856f..6956b408d004 100644
--- a/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
+++ b/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
@@ -184,9 +184,97 @@ Releaselock:
add edi, StackStartAddressLocation
add rax, qword [edi]
mov rsp, rax
+
+ lea edi, [esi + SevEsIsEnabledLocation]
+ cmp byte [edi], 1 ; SevEsIsEnabled
+ jne CProcedureInvoke
+
+ ;
+ ; program GHCB
+ ; Each page after the GHCB is a per-CPU page, so the calculation programs
+ ; a GHCB to be every 8KB.
+ ;
+ mov eax, SIZE_4KB
+ shl eax, 1 ; EAX = SIZE_4K * 2
+ mov ecx, ebx
+ mul ecx ; EAX = SIZE_4K * 2 * CpuNumber
+ mov edi, esi
+ add edi, GhcbBaseLocation
+ add rax, qword [edi]
+ mov rdx, rax
+ shr rdx, 32
+ mov rcx, 0xc0010130
+ wrmsr
jmp CProcedureInvoke
GetApicId:
+ lea edi, [esi + SevEsIsEnabledLocation]
+ cmp byte [edi], 1 ; SevEsIsEnabled
+ jne DoCpuid
+
+ ;
+ ; Since we don't have a stack yet, we can't take a #VC
+ ; exception. Use the GHCB protocol to perform the CPUID
+ ; calls.
+ ;
+ mov rcx, 0xc0010130
+ rdmsr
+ shl rdx, 32
+ or rax, rdx
+ mov rdi, rax ; RDI now holds the original GHCB GPA
+
+ mov rdx, 0 ; CPUID function 0
+ mov rax, 0 ; RAX register requested
+ or rax, 4
+ wrmsr
+ rep vmmcall
+ rdmsr
+ cmp edx, 0bh
+ jb NoX2ApicSevEs ; CPUID level below CPUID_EXTENDED_TOPOLOGY
+
+ mov rdx, 0bh ; CPUID function 0x0b
+ mov rax, 040000000h ; RBX register requested
+ or rax, 4
+ wrmsr
+ rep vmmcall
+ rdmsr
+ test edx, 0ffffh
+ jz NoX2ApicSevEs ; CPUID.0BH:EBX[15:0] is zero
+
+ mov rdx, 0bh ; CPUID function 0x0b
+ mov rax, 0c0000000h ; RDX register requested
+ or rax, 4
+ wrmsr
+ rep vmmcall
+ rdmsr
+
+ ; Processor is x2APIC capable; 32-bit x2APIC ID is now in EDX
+ jmp RestoreGhcb
+
+NoX2ApicSevEs:
+ ; Processor is not x2APIC capable, so get 8-bit APIC ID
+ mov rdx, 1 ; CPUID function 1
+ mov rax, 040000000h ; RBX register requested
+ or rax, 4
+ wrmsr
+ rep vmmcall
+ rdmsr
+ shr edx, 24
+
+RestoreGhcb:
+ mov rbx, rdx ; Save x2APIC/APIC ID
+
+ mov rdx, rdi ; RDI holds the saved GHCB GPA
+ shr rdx, 32
+ mov eax, edi
+ wrmsr
+
+ mov rdx, rbx
+
+ ; x2APIC ID or APIC ID is in EDX
+ jmp GetProcessorNumber
+
+DoCpuid:
mov eax, 0
cpuid
cmp eax, 0bh
@@ -253,12 +341,158 @@ CProcedureInvoke:
RendezvousFunnelProcEnd:
+;-------------------------------------------------------------------------------------
+;SwitchToRealProc procedure follows.
+;ALSO THIS PROCEDURE IS EXECUTED BY APs TRANSITIONING TO 16 BIT MODE. HENCE THIS PROC
+;IS IN MACHINE CODE.
+; SwitchToRealProc (UINTN BufferStart, UINT16 Code16, UINT16 Code32, UINTN StackStart)
+; rcx - Buffer Start
+; rdx - Code16 Selector Offset
+; r8 - Code32 Selector Offset
+; r9 - Stack Start
+;-------------------------------------------------------------------------------------
+global ASM_PFX(SwitchToRealProc)
+ASM_PFX(SwitchToRealProc):
+SwitchToRealProcStart:
+BITS 64
+ cli
+
+ ;
+ ; Get RDX reset value before changing stacks since the
+ ; new stack won't be able to accomodate a #VC exception.
+ ;
+ push rax
+ push rbx
+ push rcx
+ push rdx
+
+ mov rax, 1
+ cpuid
+ mov rsi, rax ; Save off the reset value for RDX
+
+ pop rdx
+ pop rcx
+ pop rbx
+ pop rax
+
+ ;
+ ; Establish stack below 1MB
+ ;
+ mov rsp, r9
+
+ ;
+ ; Push ultimate Reset Vector onto the stack
+ ;
+ mov rax, rcx
+ shr rax, 4
+ push word 0x0002 ; RFLAGS
+ push ax ; CS
+ push word 0x0000 ; RIP
+ push word 0x0000 ; For alignment, will be discarded
+
+ ;
+ ; Get address of "16-bit operand size" label
+ ;
+ lea rbx, [PM16Mode]
+
+ ;
+ ; Push addresses used to change to compatibility mode
+ ;
+ lea rax, [CompatMode]
+ push r8
+ push rax
+
+ ;
+ ; Clear R8 - R15, for reset, before going into 32-bit mode
+ ;
+ xor r8, r8
+ xor r9, r9
+ xor r10, r10
+ xor r11, r11
+ xor r12, r12
+ xor r13, r13
+ xor r14, r14
+ xor r15, r15
+
+ ;
+ ; Far return into 32-bit mode
+ ;
+o64 retf
+
+BITS 32
+CompatMode:
+ ;
+ ; Set up stack to prepare for exiting protected mode
+ ;
+ push edx ; Code16 CS
+ push ebx ; PM16Mode label address
+
+ ;
+ ; Disable paging
+ ;
+ mov eax, cr0 ; Read CR0
+ btr eax, 31 ; Set PG=0
+ mov cr0, eax ; Write CR0
+
+ ;
+ ; Disable long mode
+ ;
+ mov ecx, 0c0000080h ; EFER MSR number
+ rdmsr ; Read EFER
+ btr eax, 8 ; Set LME=0
+ wrmsr ; Write EFER
+
+ ;
+ ; Disable PAE
+ ;
+ mov eax, cr4 ; Read CR4
+ btr eax, 5 ; Set PAE=0
+ mov cr4, eax ; Write CR4
+
+ mov edx, esi ; Restore RDX reset value
+
+ ;
+ ; Switch to 16-bit operand size
+ ;
+ retf
+
+BITS 16
+ ;
+ ; At entry to this label
+ ; - RDX will have its reset value
+ ; - On the top of the stack
+ ; - Alignment data (two bytes) to be discarded
+ ; - IP for Real Mode (two bytes)
+ ; - CS for Real Mode (two bytes)
+ ;
+PM16Mode:
+ mov eax, cr0 ; Read CR0
+ btr eax, 0 ; Set PE=0
+ mov cr0, eax ; Write CR0
+
+ pop ax ; Discard alignment data
+
+ ;
+ ; Clear registers (except RDX and RSP) before going into 16-bit mode
+ ;
+ xor eax, eax
+ xor ebx, ebx
+ xor ecx, ecx
+ xor esi, esi
+ xor edi, edi
+ xor ebp, ebp
+
+ iret
+
+SwitchToRealProcEnd:
+
;-------------------------------------------------------------------------------------
; AsmRelocateApLoop (MwaitSupport, ApTargetCState, PmCodeSegment, TopOfApStack, CountTofinish);
;-------------------------------------------------------------------------------------
global ASM_PFX(AsmRelocateApLoop)
ASM_PFX(AsmRelocateApLoop):
AsmRelocateApLoopStart:
+BITS 64
cli ; Disable interrupt before switching to 32-bit mode
mov rax, [rsp + 40] ; CountTofinish
lock dec dword [rax] ; (*CountTofinish)--
@@ -324,6 +558,11 @@ ASM_PFX(AsmGetAddressMap):
mov qword [rcx + 18h], rax
mov qword [rcx + 20h], AsmRelocateApLoopEnd - AsmRelocateApLoopStart
mov qword [rcx + 28h], Flat32Start - RendezvousFunnelProcStart
+ mov qword [rcx + 30h], SwitchToRealProcEnd - SwitchToRealProcStart ; SwitchToRealSize
+ mov qword [rcx + 38h], SwitchToRealProcStart - RendezvousFunnelProcStart ; SwitchToRealOffset
+ mov qword [rcx + 40h], SwitchToRealProcStart - Flat32Start ; SwitchToRealNoNxOffset
+ mov qword [rcx + 48h], PM16Mode - RendezvousFunnelProcStart ; SwitchToRealPM16ModeOffset
+ mov qword [rcx + 50h], SwitchToRealProcEnd - PM16Mode ; SwitchToRealPM16ModeSize
ret
;-------------------------------------------------------------------------------------
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 40/42] OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (37 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 39/42] UefiCpuPkg: Allow AP booting under SEV-ES Lendacky, Thomas
@ 2020-03-24 17:40 ` Lendacky, Thomas
2020-03-24 19:44 ` [PATCH v6 35/42] OvmfPkg/Sec: Enable cache early to speed up booting Lendacky, Thomas
` (3 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 17:40 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
A hypervisor is not allowed to update an SEV-ES guest's register state,
so when booting an SEV-ES guest AP, the hypervisor is not allowed to
set the RIP to the guest requested value. Instead an SEV-ES AP must be
re-directed from within the guest to the actual requested staring location
as specified in the INIT-SIPI-SIPI sequence.
Use the SEV-ES work area for the reset vector code that contains support
to jump to the desired RIP location after having been started. This is
required for only the very first AP reset.
This new OVMF source file, ResetVectorVtf0.asm, is used in place of the
original file through the use of the include path order set in
OvmfPkg/ResetVector/ResetVector.inf under "[BuildOptions]".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 100 +++++++++++++++++++
OvmfPkg/ResetVector/ResetVector.nasmb | 1 +
2 files changed, 101 insertions(+)
create mode 100644 OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
diff --git a/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm b/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
new file mode 100644
index 000000000000..980e0138e7fe
--- /dev/null
+++ b/OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
@@ -0,0 +1,100 @@
+;------------------------------------------------------------------------------
+; @file
+; First code executed by processor after resetting.
+; Derived from UefiCpuPkg/ResetVector/Vtf0/Ia16/ResetVectorVtf0.asm
+;
+; Copyright (c) 2008 - 2014, Intel Corporation. All rights reserved.<BR>
+; SPDX-License-Identifier: BSD-2-Clause-Patent
+;
+;------------------------------------------------------------------------------
+
+BITS 16
+
+ALIGN 16
+
+;
+; Pad the image size to 4k when page tables are in VTF0
+;
+; If the VTF0 image has page tables built in, then we need to make
+; sure the end of VTF0 is 4k above where the page tables end.
+;
+; This is required so the page tables will be 4k aligned when VTF0 is
+; located just below 0x100000000 (4GB) in the firmware device.
+;
+%ifdef ALIGN_TOP_TO_4K_FOR_PAGING
+ TIMES (0x1000 - ($ - EndOfPageTables) - 0x20) DB 0
+%endif
+
+;
+; SEV-ES Processor Reset support
+;
+; sevEsResetBlock:
+; For the initial boot of an AP under SEV-ES, the "reset" RIP must be
+; programmed to the RAM area defined by SEV_ES_AP_RESET_IP. A known offset
+; and GUID will be used to locate this block in the firmware and extract
+; the build time RIP value. The GUID must always be 48 bytes from the
+; end of the firmware.
+;
+; 0xffffffca (-0x36) - IP value
+; 0xffffffcc (-0x34) - CS segment base [31:16]
+; 0xffffffce (-0x32) - Size of the SEV-ES reset block
+; 0xffffffd0 (-0x30) - SEV-ES reset block GUID
+; (00f771de-1a7e-4fcb-890e-68c77e2fb44e)
+;
+; A hypervisor reads the CS segement base and IP value. The CS segment base
+; value represents the high order 16-bits of the CS segment base, so the
+; hypervisor must left shift the value of the CS segement base by 16 bits to
+; form the full CS segment base for the CS segment register. It would then
+; program the EIP register with the IP value as read.
+;
+
+TIMES (32 - (sevEsResetBlockEnd - sevEsResetBlockStart)) DB 0
+
+sevEsResetBlockStart:
+ DD SEV_ES_AP_RESET_IP
+ DW sevEsResetBlockEnd - sevEsResetBlockStart
+ DB 0xDE, 0x71, 0xF7, 0x00, 0x7E, 0x1A, 0xCB, 0x4F
+ DB 0x89, 0x0E, 0x68, 0xC7, 0x7E, 0x2F, 0xB4, 0x4E
+sevEsResetBlockEnd:
+
+ALIGN 16
+
+applicationProcessorEntryPoint:
+;
+; Application Processors entry point
+;
+; GenFv generates code aligned on a 4k boundary which will jump to this
+; location. (0xffffffe0) This allows the Local APIC Startup IPI to be
+; used to wake up the application processors.
+;
+ jmp EarlyApInitReal16
+
+ALIGN 8
+
+ DD 0
+
+;
+; The VTF signature
+;
+; VTF-0 means that the VTF (Volume Top File) code does not require
+; any fixups.
+;
+vtfSignature:
+ DB 'V', 'T', 'F', 0
+
+ALIGN 16
+
+resetVector:
+;
+; Reset Vector
+;
+; This is where the processor will begin execution
+;
+ nop
+ nop
+ jmp EarlyBspInitReal16
+
+ALIGN 16
+
+fourGigabytes:
+
diff --git a/OvmfPkg/ResetVector/ResetVector.nasmb b/OvmfPkg/ResetVector/ResetVector.nasmb
index 762661115d50..4913b379a993 100644
--- a/OvmfPkg/ResetVector/ResetVector.nasmb
+++ b/OvmfPkg/ResetVector/ResetVector.nasmb
@@ -82,5 +82,6 @@
%include "Main.asm"
+ %define SEV_ES_AP_RESET_IP FixedPcdGet32 (PcdSevEsWorkAreaBase)
%include "Ia16/ResetVectorVtf0.asm"
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 35/42] OvmfPkg/Sec: Enable cache early to speed up booting
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (38 preceding siblings ...)
2020-03-24 17:40 ` [PATCH v6 40/42] OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector Lendacky, Thomas
@ 2020-03-24 19:44 ` Lendacky, Thomas
2020-03-24 19:44 ` [PATCH v6 41/42] OvmfPkg: Move the GHCB allocations into reserved memory Lendacky, Thomas
` (2 subsequent siblings)
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 19:44 UTC (permalink / raw)
To: devel
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Currently, the OVMF code relies on the hypervisor to enable the cache
support on the processor in order to improve the boot speed. However,
with SEV-ES, the hypervisor is not allowed to change the CR0 register
to enable caching.
Update the OVMF Sec support to enable caching in order to improve the
boot speed when running as an SEV-ES guest.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
OvmfPkg/Sec/SecMain.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/OvmfPkg/Sec/SecMain.c b/OvmfPkg/Sec/SecMain.c
index 1dd185aabc8a..fa66ced816dd 100644
--- a/OvmfPkg/Sec/SecMain.c
+++ b/OvmfPkg/Sec/SecMain.c
@@ -877,6 +877,13 @@ SecCoreStartupWithStack (
// For non SEV-ES guests, just load the IDTR.
//
AsmWriteIdtr (&IdtDescriptor);
+ } else {
+ //
+ // Under SEV-ES, the hypervisor can't modify CR0 and so can't enable
+ // caching in order to speed up the boot. Enable caching early for
+ // an SEV-ES guest.
+ //
+ AsmEnableCache ();
}
DEBUG ((EFI_D_INFO,
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 41/42] OvmfPkg: Move the GHCB allocations into reserved memory
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (39 preceding siblings ...)
2020-03-24 19:44 ` [PATCH v6 35/42] OvmfPkg/Sec: Enable cache early to speed up booting Lendacky, Thomas
@ 2020-03-24 19:44 ` Lendacky, Thomas
2020-03-24 19:44 ` [PATCH v6 42/42] UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use Lendacky, Thomas
2020-03-30 16:53 ` [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 19:44 UTC (permalink / raw)
To: devel
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
After having transitioned from UEFI to the OS, the OS will need to boot
the APs. For an SEV-ES guest, the APs will have been parked by UEFI using
GHCB pages allocated by UEFI. The hypervisor will write to the GHCB
SW_EXITINFO2 field of the GHCB when the AP is booted. As a result, the
GHCB pages must be marked reserved so that the OS does not attempt to use
them and experience memory corruption because of the hypervisor write.
Change the GHCB allocation from the default boot services memory to
reserved memory.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
OvmfPkg/PlatformPei/AmdSev.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/OvmfPkg/PlatformPei/AmdSev.c b/OvmfPkg/PlatformPei/AmdSev.c
index 38885de359af..2b6c965808e9 100644
--- a/OvmfPkg/PlatformPei/AmdSev.c
+++ b/OvmfPkg/PlatformPei/AmdSev.c
@@ -51,9 +51,11 @@ AmdSevEsInitialize (
//
// Allocate GHCB and per-CPU variable pages.
+ // Since the pages must survive across the UEFI to OS transition
+ // make them reserved.
//
GhcbPageCount = mMaxCpuCount * 2;
- GhcbBase = AllocatePages (GhcbPageCount);
+ GhcbBase = AllocateReservedPages (GhcbPageCount);
ASSERT (GhcbBase != NULL);
GhcbBasePa = (PHYSICAL_ADDRESS)(UINTN) GhcbBase;
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* [PATCH v6 42/42] UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (40 preceding siblings ...)
2020-03-24 19:44 ` [PATCH v6 41/42] OvmfPkg: Move the GHCB allocations into reserved memory Lendacky, Thomas
@ 2020-03-24 19:44 ` Lendacky, Thomas
2020-03-30 16:53 ` [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
42 siblings, 0 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-24 19:44 UTC (permalink / raw)
To: devel
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Before UEFI transfers control to the OS, it must park the AP. This is
done using the AsmRelocateApLoop function to transition into 32-bit
non-paging mode. For an SEV-ES guest, a few additional things must be
done:
- AsmRelocateApLoop must be updated to support SEV-ES. This means
performing a VMGEXIT AP Reset Hold instead of an MWAIT or HLT loop.
- Since the AP must transition to real mode, a small routine is copied
to the WakeupBuffer area. Since the WakeupBuffer will be used by
the AP during OS booting, it must be placed in reserved memory.
Additionally, the AP stack must be located where it can be accessed
in real mode.
- Once the AP is in real mode it will transfer control to the
destination specified by the OS in the SEV-ES AP Jump Table. The
SEV-ES AP Jump Table address is saved by the hypervisor for the OS
using the GHCB VMGEXIT AP Jump Table exit code.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
UefiCpuPkg/Library/MpInitLib/MpLib.h | 8 +-
UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 44 +++++-
UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 131 ++++++++++++++++--
3 files changed, 166 insertions(+), 17 deletions(-)
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h b/UefiCpuPkg/Library/MpInitLib/MpLib.h
index 56bfd9cc253c..0cc92d011bd8 100755
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
@@ -292,7 +292,8 @@ struct _CPU_MP_DATA {
UINT64 GhcbBase;
};
-#define AP_RESET_STACK_SIZE 64
+#define AP_SAFE_STACK_SIZE 128
+#define AP_RESET_STACK_SIZE AP_SAFE_STACK_SIZE
#pragma pack(1)
@@ -348,8 +349,11 @@ VOID
IN BOOLEAN MwaitSupport,
IN UINTN ApTargetCState,
IN UINTN PmCodeSegment,
+ IN UINTN Pm16CodeSegment,
IN UINTN TopOfApStack,
- IN UINTN NumberToFinish
+ IN UINTN NumberToFinish,
+ IN UINTN SevEsAPJumpTable,
+ IN UINTN WakeupBuffer
);
/**
diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
index 8510a13145f3..db15f88a3f29 100644
--- a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
@@ -12,13 +12,13 @@
#include <Library/UefiBootServicesTableLib.h>
#include <Library/DebugAgentLib.h>
#include <Library/DxeServicesTableLib.h>
+#include <Library/VmgExitLib.h>
#include <Register/Amd/Fam17Msr.h>
#include <Register/Amd/Ghcb.h>
#include <Protocol/Timer.h>
#define AP_CHECK_INTERVAL (EFI_TIMER_PERIOD_MILLISECONDS (100))
-#define AP_SAFE_STACK_SIZE 128
CPU_MP_DATA *mCpuMpData = NULL;
EFI_EVENT mCheckAllApsEvent = NULL;
@@ -86,6 +86,13 @@ GetWakeupBuffer (
{
EFI_STATUS Status;
EFI_PHYSICAL_ADDRESS StartAddress;
+ EFI_MEMORY_TYPE MemoryType;
+
+ if (PcdGetBool (PcdSevEsIsEnabled)) {
+ MemoryType = EfiReservedMemoryType;
+ } else {
+ MemoryType = EfiBootServicesData;
+ }
//
// Try to allocate buffer below 1M for waking vector.
@@ -98,7 +105,7 @@ GetWakeupBuffer (
StartAddress = 0x88000;
Status = gBS->AllocatePages (
AllocateMaxAddress,
- EfiBootServicesData,
+ MemoryType,
EFI_SIZE_TO_PAGES (WakeupBufferSize),
&StartAddress
);
@@ -177,6 +184,11 @@ GetSevEsAPMemory (
DEBUG ((DEBUG_INFO, "Dxe: SevEsAPMemory = %lx\n", (UINTN) StartAddress));
+ //
+ // Save the SevEsAPMemory as the AP jump table.
+ //
+ VmgExitSetAPJumpTable (StartAddress);
+
return (UINTN) StartAddress;
}
@@ -331,17 +343,26 @@ RelocateApLoop (
BOOLEAN MwaitSupport;
ASM_RELOCATE_AP_LOOP AsmRelocateApLoopFunc;
UINTN ProcessorNumber;
+ UINTN StackStart;
MpInitLibWhoAmI (&ProcessorNumber);
CpuMpData = GetCpuMpData ();
MwaitSupport = IsMwaitSupport ();
+ if (CpuMpData->SevEsIsEnabled) {
+ StackStart = CpuMpData->SevEsAPResetStackStart;
+ } else {
+ StackStart = mReservedTopOfApStack;
+ }
AsmRelocateApLoopFunc = (ASM_RELOCATE_AP_LOOP) (UINTN) mReservedApLoopFunc;
AsmRelocateApLoopFunc (
MwaitSupport,
CpuMpData->ApTargetCState,
CpuMpData->PmCodeSegment,
- mReservedTopOfApStack - ProcessorNumber * AP_SAFE_STACK_SIZE,
- (UINTN) &mNumberToFinish
+ CpuMpData->Pm16CodeSegment,
+ StackStart - ProcessorNumber * AP_SAFE_STACK_SIZE,
+ (UINTN) &mNumberToFinish,
+ CpuMpData->SevEsAPBuffer,
+ CpuMpData->WakeupBuffer
);
//
// It should never reach here
@@ -375,6 +396,21 @@ MpInitChangeApLoopCallback (
while (mNumberToFinish > 0) {
CpuPause ();
}
+
+ if (CpuMpData->SevEsIsEnabled && (CpuMpData->WakeupBuffer != (UINTN) -1)) {
+ //
+ // There are APs present. Re-use reserved memory area below 1MB from
+ // WakeupBuffer as the area to be used for transitioning to 16-bit mode
+ // in support of booting of the AP by an OS.
+ //
+ CopyMem (
+ (VOID *) CpuMpData->WakeupBuffer,
+ (VOID *) CpuMpData->AddressMap.RendezvousFunnelAddress +
+ CpuMpData->AddressMap.SwitchToRealPM16ModeOffset,
+ CpuMpData->AddressMap.SwitchToRealPM16ModeSize
+ );
+ }
+
DEBUG ((DEBUG_INFO, "%a() done!\n", __FUNCTION__));
}
diff --git a/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm b/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
index 6956b408d004..3b8ec477b8b3 100644
--- a/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
+++ b/UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm
@@ -465,6 +465,10 @@ BITS 16
; - IP for Real Mode (two bytes)
; - CS for Real Mode (two bytes)
;
+ ; This label is also used with AsmRelocateApLoop. During MP finalization,
+ ; the code from PM16Mode to SwitchToRealProcEnd is copied to the start of
+ ; the WakeupBuffer, allowing a parked AP to be booted by an OS.
+ ;
PM16Mode:
mov eax, cr0 ; Read CR0
btr eax, 0 ; Set PE=0
@@ -487,32 +491,95 @@ PM16Mode:
SwitchToRealProcEnd:
;-------------------------------------------------------------------------------------
-; AsmRelocateApLoop (MwaitSupport, ApTargetCState, PmCodeSegment, TopOfApStack, CountTofinish);
+; AsmRelocateApLoop (MwaitSupport, ApTargetCState, PmCodeSegment, Pm16CodeSegment, TopOfApStack, CountTofinish, SevEsAPJumpTable, WakeupBuffer);
;-------------------------------------------------------------------------------------
global ASM_PFX(AsmRelocateApLoop)
ASM_PFX(AsmRelocateApLoop):
AsmRelocateApLoopStart:
BITS 64
+ cmp qword [rsp + 56], 0
+ je NoSevEs
+
+ ;
+ ; Perform some SEV-ES related setup before leaving 64-bit mode
+ ;
+ push rcx
+ push rdx
+
+ ;
+ ; Get the RDX reset value using CPUID
+ ;
+ mov rax, 1
+ cpuid
+ mov rsi, rax ; Save off the reset value for RDX
+
+ ;
+ ; Prepare the GHCB for the AP_HLT_LOOP VMGEXIT call
+ ; - Must be done while in 64-bit long mode so that writes to
+ ; the GHCB memory will be unencrypted.
+ ; - No NAE events can be generated once this is set otherwise
+ ; the AP_RESET_HOLD SW_EXITCODE will be overwritten.
+ ;
+ mov rcx, 0xc0010130
+ rdmsr ; Retrieve current GHCB address
+ shl rdx, 32
+ or rdx, rax
+
+ mov rdi, rdx
+ xor rax, rax
+ mov rcx, 0x800
+ shr rcx, 3
+ rep stosq ; Clear the GHCB
+
+ mov rax, 0x80000004 ; VMGEXIT AP_RESET_HOLD
+ mov [rdx + 0x390], rax
+
+ pop rdx
+ pop rcx
+
+NoSevEs:
cli ; Disable interrupt before switching to 32-bit mode
- mov rax, [rsp + 40] ; CountTofinish
+ mov rax, [rsp + 48] ; CountTofinish
lock dec dword [rax] ; (*CountTofinish)--
- mov rsp, r9
- push rcx
- push rdx
- lea rsi, [PmEntry] ; rsi <- The start address of transition code
+ mov rax, [rsp + 56] ; SevEsAPJumpTable
+ mov rbx, [rsp + 64] ; WakeupBuffer
+ mov rsp, [rsp + 40] ; TopOfApStack
+
+ push rax ; Save SevEsAPJumpTable
+ push rbx ; Save WakeupBuffer
+ push r9 ; Save Pm16CodeSegment
+ push rcx ; Save MwaitSupport
+ push rdx ; Save ApTargetCState
+
+ lea rax, [PmEntry] ; rax <- The start address of transition code
push r8
- push rsi
- DB 0x48
- retf
+ push rax
+
+ ;
+ ; Clear R8 - R15, for reset, before going into 32-bit mode
+ ;
+ xor r8, r8
+ xor r9, r9
+ xor r10, r10
+ xor r11, r11
+ xor r12, r12
+ xor r13, r13
+ xor r14, r14
+ xor r15, r15
+
+ ;
+ ; Far return into 32-bit mode
+ ;
+o64 retf
+
BITS 32
PmEntry:
mov eax, cr0
btr eax, 31 ; Clear CR0.PG
mov cr0, eax ; Disable paging and caches
- mov ebx, edx ; Save EntryPoint to rbx, for rdmsr will overwrite rdx
mov ecx, 0xc0000080
rdmsr
and ah, ~ 1 ; Clear LME
@@ -525,6 +592,8 @@ PmEntry:
add esp, 4
pop ecx,
add esp, 4
+
+MwaitCheck:
cmp cl, 1 ; Check mwait-monitor support
jnz HltLoop
mov ebx, edx ; Save C-State to ebx
@@ -538,10 +607,50 @@ MwaitLoop:
shl eax, 4
mwait
jmp MwaitLoop
+
HltLoop:
+ pop edx ; PM16CodeSegment
+ add esp, 4
+ pop ebx ; WakeupBuffer
+ add esp, 4
+ pop eax ; SevEsAPJumpTable
+ add esp, 4
+ cmp eax, 0 ; Check for SEV-ES
+ je DoHlt
+
+ cli
+ ;
+ ; SEV-ES is enabled, use VMGEXIT (GHCB information already
+ ; set by caller)
+ ;
+BITS 64
+ rep vmmcall
+BITS 32
+
+ ;
+ ; Back from VMGEXIT AP_HLT_LOOP
+ ; Push the FLAGS/CS/IP values to use
+ ;
+ push word 0x0002 ; EFLAGS
+ xor ecx, ecx
+ mov cx, [eax + 2] ; CS
+ push cx
+ mov cx, [eax] ; IP
+ push cx
+ push word 0x0000 ; For alignment, will be discarded
+
+ push edx
+ push ebx
+
+ mov edx, esi ; Restore RDX reset value
+
+ retf
+
+DoHlt:
cli
hlt
- jmp HltLoop
+ jmp DoHlt
+
BITS 64
AsmRelocateApLoopEnd:
--
2.17.1
^ permalink raw reply related [flat|nested] 50+ messages in thread
* Re: [PATCH v6 00/42] SEV-ES guest support
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
` (41 preceding siblings ...)
2020-03-24 19:44 ` [PATCH v6 42/42] UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use Lendacky, Thomas
@ 2020-03-30 16:53 ` Lendacky, Thomas
2020-03-31 0:47 ` [edk2-devel] " Dong, Eric
42 siblings, 1 reply; 50+ messages in thread
From: Lendacky, Thomas @ 2020-03-30 16:53 UTC (permalink / raw)
To: devel
Cc: Jordan Justen, Laszlo Ersek, Ard Biesheuvel, Michael D Kinney,
Liming Gao, Eric Dong, Ray Ni, Brijesh Singh, Benjamin You,
Dandan Bi, Guo Dong, Hao A Wu, Jian J Wang, Maurice Ma
I've gotten some nice feedback from Laszlo, especially on the OvmfPkg side
of this patchset, but haven't seen much response from the other
maintainers. Is there any feedback on the MdePkg, MdeModulePkg and
UefiCpuPkg changes that needs to be addressed in order to merge this?
I do have some minor changes on ensuring the per-CPU variable page stays
encrypted, but not much beyond that. Those changes can be submitted
afterwards or as a new version before inclusion.
Thanks,
Tom
On 3/24/20 12:40 PM, Tom Lendacky wrote:
> This patch series provides support for running EDK2/OVMF under SEV-ES.
>
> Secure Encrypted Virtualization - Encrypted State (SEV-ES) expands on the
> SEV support to protect the guest register state from the hypervisor. See
> "AMD64 Architecture Programmer's Manual Volume 2: System Programming",
> section "15.35 Encrypted State (SEV-ES)" [1].
>
> In order to allow a hypervisor to perform functions on behalf of a guest,
> there is architectural support for notifying a guest's operating system
> when certain types of VMEXITs are about to occur. This allows the guest to
> selectively share information with the hypervisor to satisfy the requested
> function. The notification is performed using a new exception, the VMM
> Communication exception (#VC). The information is shared through the
> Guest-Hypervisor Communication Block (GHCB) using the VMGEXIT instruction.
> The GHCB format and the protocol for using it is documented in "SEV-ES
> Guest-Hypervisor Communication Block Standardization" [2].
>
> The main areas of the EDK2 code that are updated to support SEV-ES are
> around the exception handling support and the AP boot support.
>
> Exception support is required starting in Sec, continuing through Pei
> and into Dxe in order to handle #VC exceptions that are generated. Each
> AP requires it's own GHCB page as well as a page to hold values specific
> to that AP.
>
> AP booting poses some interesting challenges. The INIT-SIPI-SIPI sequence
> is typically used to boot the APs. However, the hypervisor is not allowed
> to update the guest registers. The GHCB document [2] talks about how SMP
> booting under SEV-ES is performed.
>
> Since the GHCB page must be a shared (unencrypted) page, the processor
> must be running in long mode in order for the guest and hypervisor to
> communicate with each other. As a result, SEV-ES is only supported under
> the X64 architecture.
>
> [1] https://www.amd.com/system/files/TechDocs/24593.pdf
> [2] https://developer.amd.com/wp-content/resources/56421.pdf
>
> ---
>
> These patches are based on commit:
> 2f524a745e23 ("BaseTools:Fix build tools print traceback info issue")
>
> Proper execution of SEV-ES relies on Bugzilla 2340 being fixed.
>
> A version of the tree (with an extra patch to workaround Bugzilla 2340) can
> be found at:
> https://github.com/AMDESE/ovmf/tree/sev-es-v13
>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Benjamin You <benjamin.you@intel.com>
> Cc: Dandan Bi <dandan.bi@intel.com>
> Cc: Eric Dong <eric.dong@intel.com>
> Cc: Guo Dong <guo.dong@intel.com>
> Cc: Hao A Wu <hao.a.wu@intel.com>
> Cc: Jian J Wang <jian.j.wang@intel.com>
> Cc: Jordan Justen <jordan.l.justen@intel.com>
> Cc: Laszlo Ersek <lersek@redhat.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Cc: Maurice Ma <maurice.ma@intel.com>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Ray Ni <ray.ni@intel.com>
>
> Changes since v5:
> - Remove extraneous VmgExitLib usage
> - Miscellaneous changes to address feedback (coding style, etc.)
>
> Changes since v4:
> - Move the SEV-ES protocol negotiation out of the SEC exception handler
> and into the SecMain.c file. As a result:
> - Move the SecGhcb related PCDs out of UefiCpuPkg and into OvmfPkg
> - Combine SecAMDSevVcHandler.c and PeiDxeAMDSevVcHandler.c into a
> single AMDSevVcHandler.c
> - Consolidate VmgExitLib usage into common LibraryClasses sections
> - Add documentation comments to the VmgExitLib functions
>
> Changes since v3:
> - Remove the need for the MP library finalization routine. The AP
> jump table address will be held by the hypervisor rather than
> communicated via the GHCB MSR. This removes some fragility around
> the UEFI to OS transition.
> - Rename the SEV-ES RIP reset area to SEV-ES workarea and use it to
> communicate the SEV-ES status, so that SEC CPU exception handling is
> only established for an SEV-ES guest.
> - Fix SMM build breakageAdd around QemuFlashPtrWrite().
> - Fix SMM build breakage by adding VC exception support the SMM CPU
> exception handling.
> - Add memory fencing around the invocation of AsmVmgExit().
> - Clarify comments around the SEV-ES AP reset RIP values and usage.
> - Move some PCD definitions from MdeModulePkg to UefiCpuPkg.
> - Remove the 16-bit code selector definition from MdeModulePkg
>
> Changes since v2:
> - Added a way to locate the SEV-ES fixed AP RIP address for starting
> AP's to avoid updating the actual flash image (build time location
> that is identified with a GUID value).
> - Create a VmgExit library to replace static inline functions.
> - Move some PCDs to the appropriate packages
> - Add support for writing to QEMU flash under SEV-ES
> - Add additional MMIO opcode support
> - Cleaned up the GHCB MSR CPUID protocol support
>
> Changes since v1:
> - Patches reworked to be more specific to the component/area being updated
> and order of definition/usage
> - Created a library for VMGEXIT-related functions to replace use of inline
> functions
> - Allocation method for GDT changed from AllocatePool to AllocatePages
> - Early caching only enabled for SEV-ES guests
> - Ensure AP loop mode set to halt loop mode for SEV-ES guests
> - Reserved SEC GHCB-related memory areas when S3 is enabled
>
> Tom Lendacky (42):
> MdePkg: Create PCDs to be used in support of SEV-ES
> MdePkg: Add the MSR definition for the GHCB register
> MdePkg: Add a structure definition for the GHCB
> MdeModulePkg/DxeIplPeim: Support GHCB pages when creating page tables
> MdePkg/BaseLib: Add support for the XGETBV instruction
> MdePkg/BaseLib: Add support for the VMGEXIT instruction
> UefiCpuPkg: Implement library support for VMGEXIT
> OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library
> UefiPayloadPkg: Prepare UefiPayloadPkg to use the VmgExitLib library
> UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC exception
> UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE events
> UefiCpuPkg/CpuExceptionHandler: Support string IO for IOIO_PROT NAE
> events
> UefiCpuPkg/CpuExceptionHandler: Add support for CPUID NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE events (MMIO)
> UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for INVD NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for MONITOR/MONITORX NAE
> events
> UefiCpuPkg/CpuExceptionHandler: Add support for MWAIT/MWAITX NAE
> events
> UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write NAE
> events
> OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator function
> OvmfPkg: Add support to perform SEV-ES initialization
> OvmfPkg: Create a GHCB page for use during Sec phase
> OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is supported
> OvmfPkg: Create GHCB pages for use during Pei and Dxe phase
> OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is enabled
> UefiCpuPkg: Create an SEV-ES workarea PCD
> OvmfPkg: Reserve a page in memory for the SEV-ES usage
> OvmfPkg/ResetVector: Add support for a 32-bit SEV check
> OvmfPkg/Sec: Add #VC exception handling for Sec phase
> OvmfPkg/Sec: Enable cache early to speed up booting
> OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash detection with
> SEV-ES is enabled
> UefiCpuPkg: Add a 16-bit protected mode code segment descriptor
> UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is
> enabled
> UefiCpuPkg: Allow AP booting under SEV-ES
> OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector
> OvmfPkg: Move the GHCB allocations into reserved memory
> UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use
>
> MdeModulePkg/MdeModulePkg.dec | 9 +
> OvmfPkg/OvmfPkg.dec | 9 +
> UefiCpuPkg/UefiCpuPkg.dec | 17 +
> OvmfPkg/OvmfPkgIa32.dsc | 6 +
> OvmfPkg/OvmfPkgIa32X64.dsc | 6 +
> OvmfPkg/OvmfPkgX64.dsc | 6 +
> OvmfPkg/OvmfXen.dsc | 1 +
> UefiCpuPkg/UefiCpuPkg.dsc | 2 +
> UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 2 +
> UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc | 2 +
> OvmfPkg/OvmfPkgX64.fdf | 9 +
> MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf | 2 +
> MdePkg/Library/BaseLib/BaseLib.inf | 4 +
> OvmfPkg/PlatformPei/PlatformPei.inf | 7 +
> .../FvbServicesRuntimeDxe.inf | 2 +
> OvmfPkg/ResetVector/ResetVector.inf | 8 +
> OvmfPkg/Sec/SecMain.inf | 4 +
> .../DxeCpuExceptionHandlerLib.inf | 5 +
> .../PeiCpuExceptionHandlerLib.inf | 5 +
> .../SecPeiCpuExceptionHandlerLib.inf | 5 +
> .../SmmCpuExceptionHandlerLib.inf | 5 +
> UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf | 4 +
> UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 4 +
> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf | 33 +
> .../Core/DxeIplPeim/X64/VirtualMemory.h | 12 +-
> MdePkg/Include/Library/BaseLib.h | 31 +
> MdePkg/Include/Register/Amd/Fam17Msr.h | 42 +
> MdePkg/Include/Register/Amd/Ghcb.h | 136 ++
> OvmfPkg/Include/Library/MemEncryptSevLib.h | 12 +
> .../QemuFlash.h | 6 +
> UefiCpuPkg/CpuDxe/CpuGdt.h | 4 +-
> UefiCpuPkg/Include/Library/VmgExitLib.h | 111 ++
> .../CpuExceptionHandlerLib/AMDSevVcCommon.h | 26 +
> .../CpuExceptionCommon.h | 2 +
> UefiCpuPkg/Library/MpInitLib/MpLib.h | 68 +-
> .../Core/DxeIplPeim/Ia32/DxeLoadFunc.c | 4 +-
> .../Core/DxeIplPeim/X64/DxeLoadFunc.c | 11 +-
> .../Core/DxeIplPeim/X64/VirtualMemory.c | 49 +-
> MdePkg/Library/BaseLib/Ia32/GccInline.c | 45 +
> MdePkg/Library/BaseLib/X64/GccInline.c | 47 +
> .../MemEncryptSevLibInternal.c | 75 +-
> OvmfPkg/PlatformPei/AmdSev.c | 82 ++
> OvmfPkg/PlatformPei/MemDetect.c | 23 +
> .../QemuFlash.c | 23 +-
> .../QemuFlashDxe.c | 15 +
> .../QemuFlashSmm.c | 9 +
> OvmfPkg/Sec/SecMain.c | 160 ++-
> UefiCpuPkg/CpuDxe/CpuGdt.c | 8 +-
> .../CpuExceptionHandlerLib/AMDSevVcHandler.c | 29 +
> .../CpuExceptionCommon.c | 2 +-
> .../Ia32/ArchAMDSevVcHandler.c | 24 +
> .../PeiDxeSmmCpuException.c | 16 +
> .../SecPeiCpuException.c | 16 +
> .../X64/ArchAMDSevVcHandler.c | 1237 +++++++++++++++++
> UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 114 +-
> UefiCpuPkg/Library/MpInitLib/MpLib.c | 257 +++-
> UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 19 +
> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c | 249 ++++
> UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c | 2 +-
> MdePkg/Library/BaseLib/Ia32/VmgExit.nasm | 37 +
> MdePkg/Library/BaseLib/Ia32/XGetBv.nasm | 31 +
> MdePkg/Library/BaseLib/X64/VmgExit.nasm | 32 +
> MdePkg/Library/BaseLib/X64/XGetBv.nasm | 34 +
> OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 100 ++
> OvmfPkg/ResetVector/Ia32/PageTables64.asm | 351 ++++-
> OvmfPkg/ResetVector/ResetVector.nasmb | 20 +
> .../X64/ExceptionHandlerAsm.nasm | 17 +
> UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc | 2 +-
> .../Library/MpInitLib/Ia32/MpFuncs.nasm | 15 +
> UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc | 4 +-
> UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 370 ++++-
> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni | 15 +
> .../ResetVector/Vtf0/Ia16/Real16ToFlat32.asm | 9 +
> 73 files changed, 4061 insertions(+), 99 deletions(-)
> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
> create mode 100644 MdePkg/Include/Register/Amd/Ghcb.h
> create mode 100644 UefiCpuPkg/Include/Library/VmgExitLib.h
> create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcCommon.h
> create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcHandler.c
> create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/Ia32/ArchAMDSevVcHandler.c
> create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c
> create mode 100644 MdePkg/Library/BaseLib/Ia32/VmgExit.nasm
> create mode 100644 MdePkg/Library/BaseLib/Ia32/XGetBv.nasm
> create mode 100644 MdePkg/Library/BaseLib/X64/VmgExit.nasm
> create mode 100644 MdePkg/Library/BaseLib/X64/XGetBv.nasm
> create mode 100644 OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni
>
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
2020-03-30 16:53 ` [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
@ 2020-03-31 0:47 ` Dong, Eric
2020-04-01 20:42 ` Lendacky, Thomas
0 siblings, 1 reply; 50+ messages in thread
From: Dong, Eric @ 2020-03-31 0:47 UTC (permalink / raw)
To: devel@edk2.groups.io, thomas.lendacky@amd.com
Cc: Justen, Jordan L, Laszlo Ersek, Ard Biesheuvel, Kinney, Michael D,
Gao, Liming, Ni, Ray, Brijesh Singh, You, Benjamin, Bi, Dandan,
Dong, Guo, Wu, Hao A, Wang, Jian J, Ma, Maurice
[-- Attachment #1: Type: text/plain, Size: 15944 bytes --]
Hi Tom,
Sorry for late response. It’s a huge patch, please give me two more weeks to detail review them.
I have rough go through these patches and have some basic comments for them now:
1. It’s better to spit patch if changes files not in same package. Like patch 1/42.
2. All functions need to have comments for them. Miss comments in patch 10/42 and others.
Please update patches to fix above basic checks first.
Thanks,
Eric
From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of Lendacky, Thomas
Sent: Tuesday, March 31, 2020 12:54 AM
To: devel@edk2.groups.io
Cc: Justen, Jordan L <jordan.l.justen@intel.com>; Laszlo Ersek <lersek@redhat.com>; Ard Biesheuvel <ard.biesheuvel@linaro.org>; Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming <liming.gao@intel.com>; Dong, Eric <eric.dong@intel.com>; Ni, Ray <ray.ni@intel.com>; Brijesh Singh <brijesh.singh@amd.com>; You, Benjamin <benjamin.you@intel.com>; Bi, Dandan <dandan.bi@intel.com>; Dong, Guo <guo.dong@intel.com>; Wu, Hao A <hao.a.wu@intel.com>; Wang, Jian J <jian.j.wang@intel.com>; Ma, Maurice <maurice.ma@intel.com>
Subject: Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
I've gotten some nice feedback from Laszlo, especially on the OvmfPkg side
of this patchset, but haven't seen much response from the other
maintainers. Is there any feedback on the MdePkg, MdeModulePkg and
UefiCpuPkg changes that needs to be addressed in order to merge this?
I do have some minor changes on ensuring the per-CPU variable page stays
encrypted, but not much beyond that. Those changes can be submitted
afterwards or as a new version before inclusion.
Thanks,
Tom
On 3/24/20 12:40 PM, Tom Lendacky wrote:
> This patch series provides support for running EDK2/OVMF under SEV-ES.
>
> Secure Encrypted Virtualization - Encrypted State (SEV-ES) expands on the
> SEV support to protect the guest register state from the hypervisor. See
> "AMD64 Architecture Programmer's Manual Volume 2: System Programming",
> section "15.35 Encrypted State (SEV-ES)" [1].
>
> In order to allow a hypervisor to perform functions on behalf of a guest,
> there is architectural support for notifying a guest's operating system
> when certain types of VMEXITs are about to occur. This allows the guest to
> selectively share information with the hypervisor to satisfy the requested
> function. The notification is performed using a new exception, the VMM
> Communication exception (#VC). The information is shared through the
> Guest-Hypervisor Communication Block (GHCB) using the VMGEXIT instruction.
> The GHCB format and the protocol for using it is documented in "SEV-ES
> Guest-Hypervisor Communication Block Standardization" [2].
>
> The main areas of the EDK2 code that are updated to support SEV-ES are
> around the exception handling support and the AP boot support.
>
> Exception support is required starting in Sec, continuing through Pei
> and into Dxe in order to handle #VC exceptions that are generated. Each
> AP requires it's own GHCB page as well as a page to hold values specific
> to that AP.
>
> AP booting poses some interesting challenges. The INIT-SIPI-SIPI sequence
> is typically used to boot the APs. However, the hypervisor is not allowed
> to update the guest registers. The GHCB document [2] talks about how SMP
> booting under SEV-ES is performed.
>
> Since the GHCB page must be a shared (unencrypted) page, the processor
> must be running in long mode in order for the guest and hypervisor to
> communicate with each other. As a result, SEV-ES is only supported under
> the X64 architecture.
>
> [1] https://www.amd.com/system/files/TechDocs/24593.pdf
> [2] https://developer.amd.com/wp-content/resources/56421.pdf
>
> ---
>
> These patches are based on commit:
> 2f524a745e23 ("BaseTools:Fix build tools print traceback info issue")
>
> Proper execution of SEV-ES relies on Bugzilla 2340 being fixed.
>
> A version of the tree (with an extra patch to workaround Bugzilla 2340) can
> be found at:
> https://github.com/AMDESE/ovmf/tree/sev-es-v13
>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org<mailto:ard.biesheuvel@linaro.org>>
> Cc: Benjamin You <benjamin.you@intel.com<mailto:benjamin.you@intel.com>>
> Cc: Dandan Bi <dandan.bi@intel.com<mailto:dandan.bi@intel.com>>
> Cc: Eric Dong <eric.dong@intel.com<mailto:eric.dong@intel.com>>
> Cc: Guo Dong <guo.dong@intel.com<mailto:guo.dong@intel.com>>
> Cc: Hao A Wu <hao.a.wu@intel.com<mailto:hao.a.wu@intel.com>>
> Cc: Jian J Wang <jian.j.wang@intel.com<mailto:jian.j.wang@intel.com>>
> Cc: Jordan Justen <jordan.l.justen@intel.com<mailto:jordan.l.justen@intel.com>>
> Cc: Laszlo Ersek <lersek@redhat.com<mailto:lersek@redhat.com>>
> Cc: Liming Gao <liming.gao@intel.com<mailto:liming.gao@intel.com>>
> Cc: Maurice Ma <maurice.ma@intel.com<mailto:maurice.ma@intel.com>>
> Cc: Michael D Kinney <michael.d.kinney@intel.com<mailto:michael.d.kinney@intel.com>>
> Cc: Ray Ni <ray.ni@intel.com<mailto:ray.ni@intel.com>>
>
> Changes since v5:
> - Remove extraneous VmgExitLib usage
> - Miscellaneous changes to address feedback (coding style, etc.)
>
> Changes since v4:
> - Move the SEV-ES protocol negotiation out of the SEC exception handler
> and into the SecMain.c file. As a result:
> - Move the SecGhcb related PCDs out of UefiCpuPkg and into OvmfPkg
> - Combine SecAMDSevVcHandler.c and PeiDxeAMDSevVcHandler.c into a
> single AMDSevVcHandler.c
> - Consolidate VmgExitLib usage into common LibraryClasses sections
> - Add documentation comments to the VmgExitLib functions
>
> Changes since v3:
> - Remove the need for the MP library finalization routine. The AP
> jump table address will be held by the hypervisor rather than
> communicated via the GHCB MSR. This removes some fragility around
> the UEFI to OS transition.
> - Rename the SEV-ES RIP reset area to SEV-ES workarea and use it to
> communicate the SEV-ES status, so that SEC CPU exception handling is
> only established for an SEV-ES guest.
> - Fix SMM build breakageAdd around QemuFlashPtrWrite().
> - Fix SMM build breakage by adding VC exception support the SMM CPU
> exception handling.
> - Add memory fencing around the invocation of AsmVmgExit().
> - Clarify comments around the SEV-ES AP reset RIP values and usage.
> - Move some PCD definitions from MdeModulePkg to UefiCpuPkg.
> - Remove the 16-bit code selector definition from MdeModulePkg
>
> Changes since v2:
> - Added a way to locate the SEV-ES fixed AP RIP address for starting
> AP's to avoid updating the actual flash image (build time location
> that is identified with a GUID value).
> - Create a VmgExit library to replace static inline functions.
> - Move some PCDs to the appropriate packages
> - Add support for writing to QEMU flash under SEV-ES
> - Add additional MMIO opcode support
> - Cleaned up the GHCB MSR CPUID protocol support
>
> Changes since v1:
> - Patches reworked to be more specific to the component/area being updated
> and order of definition/usage
> - Created a library for VMGEXIT-related functions to replace use of inline
> functions
> - Allocation method for GDT changed from AllocatePool to AllocatePages
> - Early caching only enabled for SEV-ES guests
> - Ensure AP loop mode set to halt loop mode for SEV-ES guests
> - Reserved SEC GHCB-related memory areas when S3 is enabled
>
> Tom Lendacky (42):
> MdePkg: Create PCDs to be used in support of SEV-ES
> MdePkg: Add the MSR definition for the GHCB register
> MdePkg: Add a structure definition for the GHCB
> MdeModulePkg/DxeIplPeim: Support GHCB pages when creating page tables
> MdePkg/BaseLib: Add support for the XGETBV instruction
> MdePkg/BaseLib: Add support for the VMGEXIT instruction
> UefiCpuPkg: Implement library support for VMGEXIT
> OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library
> UefiPayloadPkg: Prepare UefiPayloadPkg to use the VmgExitLib library
> UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC exception
> UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE events
> UefiCpuPkg/CpuExceptionHandler: Support string IO for IOIO_PROT NAE
> events
> UefiCpuPkg/CpuExceptionHandler: Add support for CPUID NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE events (MMIO)
> UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for INVD NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP NAE events
> UefiCpuPkg/CpuExceptionHandler: Add support for MONITOR/MONITORX NAE
> events
> UefiCpuPkg/CpuExceptionHandler: Add support for MWAIT/MWAITX NAE
> events
> UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write NAE
> events
> OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator function
> OvmfPkg: Add support to perform SEV-ES initialization
> OvmfPkg: Create a GHCB page for use during Sec phase
> OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is supported
> OvmfPkg: Create GHCB pages for use during Pei and Dxe phase
> OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is enabled
> UefiCpuPkg: Create an SEV-ES workarea PCD
> OvmfPkg: Reserve a page in memory for the SEV-ES usage
> OvmfPkg/ResetVector: Add support for a 32-bit SEV check
> OvmfPkg/Sec: Add #VC exception handling for Sec phase
> OvmfPkg/Sec: Enable cache early to speed up booting
> OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash detection with
> SEV-ES is enabled
> UefiCpuPkg: Add a 16-bit protected mode code segment descriptor
> UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is
> enabled
> UefiCpuPkg: Allow AP booting under SEV-ES
> OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector
> OvmfPkg: Move the GHCB allocations into reserved memory
> UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use
>
> MdeModulePkg/MdeModulePkg.dec | 9 +
> OvmfPkg/OvmfPkg.dec | 9 +
> UefiCpuPkg/UefiCpuPkg.dec | 17 +
> OvmfPkg/OvmfPkgIa32.dsc | 6 +
> OvmfPkg/OvmfPkgIa32X64.dsc | 6 +
> OvmfPkg/OvmfPkgX64.dsc | 6 +
> OvmfPkg/OvmfXen.dsc | 1 +
> UefiCpuPkg/UefiCpuPkg.dsc | 2 +
> UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 2 +
> UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc | 2 +
> OvmfPkg/OvmfPkgX64.fdf | 9 +
> MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf | 2 +
> MdePkg/Library/BaseLib/BaseLib.inf | 4 +
> OvmfPkg/PlatformPei/PlatformPei.inf | 7 +
> .../FvbServicesRuntimeDxe.inf | 2 +
> OvmfPkg/ResetVector/ResetVector.inf | 8 +
> OvmfPkg/Sec/SecMain.inf | 4 +
> .../DxeCpuExceptionHandlerLib.inf | 5 +
> .../PeiCpuExceptionHandlerLib.inf | 5 +
> .../SecPeiCpuExceptionHandlerLib.inf | 5 +
> .../SmmCpuExceptionHandlerLib.inf | 5 +
> UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf | 4 +
> UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 4 +
> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf | 33 +
> .../Core/DxeIplPeim/X64/VirtualMemory.h | 12 +-
> MdePkg/Include/Library/BaseLib.h | 31 +
> MdePkg/Include/Register/Amd/Fam17Msr.h | 42 +
> MdePkg/Include/Register/Amd/Ghcb.h | 136 ++
> OvmfPkg/Include/Library/MemEncryptSevLib.h | 12 +
> .../QemuFlash.h | 6 +
> UefiCpuPkg/CpuDxe/CpuGdt.h | 4 +-
> UefiCpuPkg/Include/Library/VmgExitLib.h | 111 ++
> .../CpuExceptionHandlerLib/AMDSevVcCommon.h | 26 +
> .../CpuExceptionCommon.h | 2 +
> UefiCpuPkg/Library/MpInitLib/MpLib.h | 68 +-
> .../Core/DxeIplPeim/Ia32/DxeLoadFunc.c | 4 +-
> .../Core/DxeIplPeim/X64/DxeLoadFunc.c | 11 +-
> .../Core/DxeIplPeim/X64/VirtualMemory.c | 49 +-
> MdePkg/Library/BaseLib/Ia32/GccInline.c | 45 +
> MdePkg/Library/BaseLib/X64/GccInline.c | 47 +
> .../MemEncryptSevLibInternal.c | 75 +-
> OvmfPkg/PlatformPei/AmdSev.c | 82 ++
> OvmfPkg/PlatformPei/MemDetect.c | 23 +
> .../QemuFlash.c | 23 +-
> .../QemuFlashDxe.c | 15 +
> .../QemuFlashSmm.c | 9 +
> OvmfPkg/Sec/SecMain.c | 160 ++-
> UefiCpuPkg/CpuDxe/CpuGdt.c | 8 +-
> .../CpuExceptionHandlerLib/AMDSevVcHandler.c | 29 +
> .../CpuExceptionCommon.c | 2 +-
> .../Ia32/ArchAMDSevVcHandler.c | 24 +
> .../PeiDxeSmmCpuException.c | 16 +
> .../SecPeiCpuException.c | 16 +
> .../X64/ArchAMDSevVcHandler.c | 1237 +++++++++++++++++
> UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 114 +-
> UefiCpuPkg/Library/MpInitLib/MpLib.c | 257 +++-
> UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 19 +
> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c | 249 ++++
> UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c | 2 +-
> MdePkg/Library/BaseLib/Ia32/VmgExit.nasm | 37 +
> MdePkg/Library/BaseLib/Ia32/XGetBv.nasm | 31 +
> MdePkg/Library/BaseLib/X64/VmgExit.nasm | 32 +
> MdePkg/Library/BaseLib/X64/XGetBv.nasm | 34 +
> OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 100 ++
> OvmfPkg/ResetVector/Ia32/PageTables64.asm | 351 ++++-
> OvmfPkg/ResetVector/ResetVector.nasmb | 20 +
> .../X64/ExceptionHandlerAsm.nasm | 17 +
> UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc | 2 +-
> .../Library/MpInitLib/Ia32/MpFuncs.nasm | 15 +
> UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc | 4 +-
> UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 370 ++++-
> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni | 15 +
> .../ResetVector/Vtf0/Ia16/Real16ToFlat32.asm | 9 +
> 73 files changed, 4061 insertions(+), 99 deletions(-)
> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
> create mode 100644 MdePkg/Include/Register/Amd/Ghcb.h
> create mode 100644 UefiCpuPkg/Include/Library/VmgExitLib.h
> create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcCommon.h
> create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcHandler.c
> create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/Ia32/ArchAMDSevVcHandler.c
> create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c
> create mode 100644 MdePkg/Library/BaseLib/Ia32/VmgExit.nasm
> create mode 100644 MdePkg/Library/BaseLib/Ia32/XGetBv.nasm
> create mode 100644 MdePkg/Library/BaseLib/X64/VmgExit.nasm
> create mode 100644 MdePkg/Library/BaseLib/X64/XGetBv.nasm
> create mode 100644 OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni
>
[-- Attachment #2: Type: text/html, Size: 48621 bytes --]
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
2020-03-31 0:47 ` [edk2-devel] " Dong, Eric
@ 2020-04-01 20:42 ` Lendacky, Thomas
2020-04-02 0:12 ` Dong, Eric
[not found] ` <1601D84A636A7BFC.25844@groups.io>
0 siblings, 2 replies; 50+ messages in thread
From: Lendacky, Thomas @ 2020-04-01 20:42 UTC (permalink / raw)
To: Dong, Eric, devel@edk2.groups.io
Cc: Justen, Jordan L, Laszlo Ersek, Ard Biesheuvel, Kinney, Michael D,
Gao, Liming, Ni, Ray, Brijesh Singh, You, Benjamin, Bi, Dandan,
Dong, Guo, Wu, Hao A, Wang, Jian J, Ma, Maurice
On 3/30/20 7:47 PM, Dong, Eric wrote:
> Hi Tom,
>
> Sorry for late response. It’s a huge patch, please give me two more weeks
> to detail review them.
>
> I have rough go through these patches and have some basic comments for
> them now:
>
> 1.It’s better to spit patch if changes files not in same package. Like
> patch 1/42.
Ok, will do.
>
> 2.All functions need to have comments for them. Miss comments in patch
> 10/42 and others.
Just external functions or both external and internal (STATIC) functions, too?
Thanks,
Tom
>
> Please update patches to fix above basic checks first.
>
> Thanks,
>
> Eric
>
> *From:*devel@edk2.groups.io [mailto:devel@edk2.groups.io] *On Behalf Of
> *Lendacky, Thomas
> *Sent:* Tuesday, March 31, 2020 12:54 AM
> *To:* devel@edk2.groups.io
> *Cc:* Justen, Jordan L <jordan.l.justen@intel.com>; Laszlo Ersek
> <lersek@redhat.com>; Ard Biesheuvel <ard.biesheuvel@linaro.org>; Kinney,
> Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <liming.gao@intel.com>; Dong, Eric <eric.dong@intel.com>; Ni, Ray
> <ray.ni@intel.com>; Brijesh Singh <brijesh.singh@amd.com>; You, Benjamin
> <benjamin.you@intel.com>; Bi, Dandan <dandan.bi@intel.com>; Dong, Guo
> <guo.dong@intel.com>; Wu, Hao A <hao.a.wu@intel.com>; Wang, Jian J
> <jian.j.wang@intel.com>; Ma, Maurice <maurice.ma@intel.com>
> *Subject:* Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
>
> I've gotten some nice feedback from Laszlo, especially on the OvmfPkg side
> of this patchset, but haven't seen much response from the other
> maintainers. Is there any feedback on the MdePkg, MdeModulePkg and
> UefiCpuPkg changes that needs to be addressed in order to merge this?
>
> I do have some minor changes on ensuring the per-CPU variable page stays
> encrypted, but not much beyond that. Those changes can be submitted
> afterwards or as a new version before inclusion.
>
> Thanks,
> Tom
>
> On 3/24/20 12:40 PM, Tom Lendacky wrote:
>> This patch series provides support for running EDK2/OVMF under SEV-ES.
>>
>> Secure Encrypted Virtualization - Encrypted State (SEV-ES) expands on the
>> SEV support to protect the guest register state from the hypervisor. See
>> "AMD64 Architecture Programmer's Manual Volume 2: System Programming",
>> section "15.35 Encrypted State (SEV-ES)" [1].
>>
>> In order to allow a hypervisor to perform functions on behalf of a guest,
>> there is architectural support for notifying a guest's operating system
>> when certain types of VMEXITs are about to occur. This allows the guest to
>> selectively share information with the hypervisor to satisfy the requested
>> function. The notification is performed using a new exception, the VMM
>> Communication exception (#VC). The information is shared through the
>> Guest-Hypervisor Communication Block (GHCB) using the VMGEXIT instruction.
>> The GHCB format and the protocol for using it is documented in "SEV-ES
>> Guest-Hypervisor Communication Block Standardization" [2].
>>
>> The main areas of the EDK2 code that are updated to support SEV-ES are
>> around the exception handling support and the AP boot support.
>>
>> Exception support is required starting in Sec, continuing through Pei
>> and into Dxe in order to handle #VC exceptions that are generated. Each
>> AP requires it's own GHCB page as well as a page to hold values specific
>> to that AP.
>>
>> AP booting poses some interesting challenges. The INIT-SIPI-SIPI sequence
>> is typically used to boot the APs. However, the hypervisor is not allowed
>> to update the guest registers. The GHCB document [2] talks about how SMP
>> booting under SEV-ES is performed.
>>
>> Since the GHCB page must be a shared (unencrypted) page, the processor
>> must be running in long mode in order for the guest and hypervisor to
>> communicate with each other. As a result, SEV-ES is only supported under
>> the X64 architecture.
>>
>> [1] https://www.amd.com/system/files/TechDocs/24593.pdf
> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.amd.com%2Fsystem%2Ffiles%2FTechDocs%2F24593.pdf&data=02%7C01%7Cthomas.lendacky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637212125835211690&sdata=Q%2BIjeq%2FRDgiovKtPeA4TGDVorCK07jQVNZ7N9kvD%2BuE%3D&reserved=0>
>> [2] https://developer.amd.com/wp-content/resources/56421.pdf
> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdeveloper.amd.com%2Fwp-content%2Fresources%2F56421.pdf&data=02%7C01%7Cthomas.lendacky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637212125835221679&sdata=bos02T0YR3i5xji9rhjPl7jpS5uJPKt1Q0hhdy%2FoMR0%3D&reserved=0>
>>
>> ---
>>
>> These patches are based on commit:
>> 2f524a745e23 ("BaseTools:Fix build tools print traceback info issue")
>>
>> Proper execution of SEV-ES relies on Bugzilla 2340 being fixed.
>>
>> A version of the tree (with an extra patch to workaround Bugzilla 2340) can
>> be found at:
>> https://github.com/AMDESE/ovmf/tree/sev-es-v13
> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FAMDESE%2Fovmf%2Ftree%2Fsev-es-v13&data=02%7C01%7Cthomas.lendacky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637212125835221679&sdata=fmIyS5QBB7YGDSqTFiBIe%2BBdH1zatcEplUdNC2wi%2Fhc%3D&reserved=0>
>>
>> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org <mailto:ard.biesheuvel@linaro.org>>
>> Cc: Benjamin You <benjamin.you@intel.com <mailto:benjamin.you@intel.com>>
>> Cc: Dandan Bi <dandan.bi@intel.com <mailto:dandan.bi@intel.com>>
>> Cc: Eric Dong <eric.dong@intel.com <mailto:eric.dong@intel.com>>
>> Cc: Guo Dong <guo.dong@intel.com <mailto:guo.dong@intel.com>>
>> Cc: Hao A Wu <hao.a.wu@intel.com <mailto:hao.a.wu@intel.com>>
>> Cc: Jian J Wang <jian.j.wang@intel.com <mailto:jian.j.wang@intel.com>>
>> Cc: Jordan Justen <jordan.l.justen@intel.com <mailto:jordan.l.justen@intel.com>>
>> Cc: Laszlo Ersek <lersek@redhat.com <mailto:lersek@redhat.com>>
>> Cc: Liming Gao <liming.gao@intel.com <mailto:liming.gao@intel.com>>
>> Cc: Maurice Ma <maurice.ma@intel.com <mailto:maurice.ma@intel.com>>
>> Cc: Michael D Kinney <michael.d.kinney@intel.com <mailto:michael.d.kinney@intel.com>>
>> Cc: Ray Ni <ray.ni@intel.com <mailto:ray.ni@intel.com>>
>>
>> Changes since v5:
>> - Remove extraneous VmgExitLib usage
>> - Miscellaneous changes to address feedback (coding style, etc.)
>>
>> Changes since v4:
>> - Move the SEV-ES protocol negotiation out of the SEC exception handler
>> and into the SecMain.c file. As a result:
>> - Move the SecGhcb related PCDs out of UefiCpuPkg and into OvmfPkg
>> - Combine SecAMDSevVcHandler.c and PeiDxeAMDSevVcHandler.c into a
>> single AMDSevVcHandler.c
>> - Consolidate VmgExitLib usage into common LibraryClasses sections
>> - Add documentation comments to the VmgExitLib functions
>>
>> Changes since v3:
>> - Remove the need for the MP library finalization routine. The AP
>> jump table address will be held by the hypervisor rather than
>> communicated via the GHCB MSR. This removes some fragility around
>> the UEFI to OS transition.
>> - Rename the SEV-ES RIP reset area to SEV-ES workarea and use it to
>> communicate the SEV-ES status, so that SEC CPU exception handling is
>> only established for an SEV-ES guest.
>> - Fix SMM build breakageAdd around QemuFlashPtrWrite().
>> - Fix SMM build breakage by adding VC exception support the SMM CPU
>> exception handling.
>> - Add memory fencing around the invocation of AsmVmgExit().
>> - Clarify comments around the SEV-ES AP reset RIP values and usage.
>> - Move some PCD definitions from MdeModulePkg to UefiCpuPkg.
>> - Remove the 16-bit code selector definition from MdeModulePkg
>>
>> Changes since v2:
>> - Added a way to locate the SEV-ES fixed AP RIP address for starting
>> AP's to avoid updating the actual flash image (build time location
>> that is identified with a GUID value).
>> - Create a VmgExit library to replace static inline functions.
>> - Move some PCDs to the appropriate packages
>> - Add support for writing to QEMU flash under SEV-ES
>> - Add additional MMIO opcode support
>> - Cleaned up the GHCB MSR CPUID protocol support
>>
>> Changes since v1:
>> - Patches reworked to be more specific to the component/area being updated
>> and order of definition/usage
>> - Created a library for VMGEXIT-related functions to replace use of inline
>> functions
>> - Allocation method for GDT changed from AllocatePool to AllocatePages
>> - Early caching only enabled for SEV-ES guests
>> - Ensure AP loop mode set to halt loop mode for SEV-ES guests
>> - Reserved SEC GHCB-related memory areas when S3 is enabled
>>
>> Tom Lendacky (42):
>> MdePkg: Create PCDs to be used in support of SEV-ES
>> MdePkg: Add the MSR definition for the GHCB register
>> MdePkg: Add a structure definition for the GHCB
>> MdeModulePkg/DxeIplPeim: Support GHCB pages when creating page tables
>> MdePkg/BaseLib: Add support for the XGETBV instruction
>> MdePkg/BaseLib: Add support for the VMGEXIT instruction
>> UefiCpuPkg: Implement library support for VMGEXIT
>> OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library
>> UefiPayloadPkg: Prepare UefiPayloadPkg to use the VmgExitLib library
>> UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC exception
>> UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE events
>> UefiCpuPkg/CpuExceptionHandler: Support string IO for IOIO_PROT NAE
>> events
>> UefiCpuPkg/CpuExceptionHandler: Add support for CPUID NAE events
>> UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT NAE events
>> UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE events (MMIO)
>> UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE events
>> UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC NAE events
>> UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC NAE events
>> UefiCpuPkg/CpuExceptionHandler: Add support for INVD NAE events
>> UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL NAE events
>> UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP NAE events
>> UefiCpuPkg/CpuExceptionHandler: Add support for MONITOR/MONITORX NAE
>> events
>> UefiCpuPkg/CpuExceptionHandler: Add support for MWAIT/MWAITX NAE
>> events
>> UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write NAE
>> events
>> OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator function
>> OvmfPkg: Add support to perform SEV-ES initialization
>> OvmfPkg: Create a GHCB page for use during Sec phase
>> OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is supported
>> OvmfPkg: Create GHCB pages for use during Pei and Dxe phase
>> OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is enabled
>> UefiCpuPkg: Create an SEV-ES workarea PCD
>> OvmfPkg: Reserve a page in memory for the SEV-ES usage
>> OvmfPkg/ResetVector: Add support for a 32-bit SEV check
>> OvmfPkg/Sec: Add #VC exception handling for Sec phase
>> OvmfPkg/Sec: Enable cache early to speed up booting
>> OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash detection with
>> SEV-ES is enabled
>> UefiCpuPkg: Add a 16-bit protected mode code segment descriptor
>> UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is
>> enabled
>> UefiCpuPkg: Allow AP booting under SEV-ES
>> OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector
>> OvmfPkg: Move the GHCB allocations into reserved memory
>> UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use
>>
>> MdeModulePkg/MdeModulePkg.dec | 9 +
>> OvmfPkg/OvmfPkg.dec | 9 +
>> UefiCpuPkg/UefiCpuPkg.dec | 17 +
>> OvmfPkg/OvmfPkgIa32.dsc | 6 +
>> OvmfPkg/OvmfPkgIa32X64.dsc | 6 +
>> OvmfPkg/OvmfPkgX64.dsc | 6 +
>> OvmfPkg/OvmfXen.dsc | 1 +
>> UefiCpuPkg/UefiCpuPkg.dsc | 2 +
>> UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 2 +
>> UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc | 2 +
>> OvmfPkg/OvmfPkgX64.fdf | 9 +
>> MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf | 2 +
>> MdePkg/Library/BaseLib/BaseLib.inf | 4 +
>> OvmfPkg/PlatformPei/PlatformPei.inf | 7 +
>> .../FvbServicesRuntimeDxe.inf | 2 +
>> OvmfPkg/ResetVector/ResetVector.inf | 8 +
>> OvmfPkg/Sec/SecMain.inf | 4 +
>> .../DxeCpuExceptionHandlerLib.inf | 5 +
>> .../PeiCpuExceptionHandlerLib.inf | 5 +
>> .../SecPeiCpuExceptionHandlerLib.inf | 5 +
>> .../SmmCpuExceptionHandlerLib.inf | 5 +
>> UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf | 4 +
>> UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 4 +
>> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf | 33 +
>> .../Core/DxeIplPeim/X64/VirtualMemory.h | 12 +-
>> MdePkg/Include/Library/BaseLib.h | 31 +
>> MdePkg/Include/Register/Amd/Fam17Msr.h | 42 +
>> MdePkg/Include/Register/Amd/Ghcb.h | 136 ++
>> OvmfPkg/Include/Library/MemEncryptSevLib.h | 12 +
>> .../QemuFlash.h | 6 +
>> UefiCpuPkg/CpuDxe/CpuGdt.h | 4 +-
>> UefiCpuPkg/Include/Library/VmgExitLib.h | 111 ++
>> .../CpuExceptionHandlerLib/AMDSevVcCommon.h | 26 +
>> .../CpuExceptionCommon.h | 2 +
>> UefiCpuPkg/Library/MpInitLib/MpLib.h | 68 +-
>> .../Core/DxeIplPeim/Ia32/DxeLoadFunc.c | 4 +-
>> .../Core/DxeIplPeim/X64/DxeLoadFunc.c | 11 +-
>> .../Core/DxeIplPeim/X64/VirtualMemory.c | 49 +-
>> MdePkg/Library/BaseLib/Ia32/GccInline.c | 45 +
>> MdePkg/Library/BaseLib/X64/GccInline.c | 47 +
>> .../MemEncryptSevLibInternal.c | 75 +-
>> OvmfPkg/PlatformPei/AmdSev.c | 82 ++
>> OvmfPkg/PlatformPei/MemDetect.c | 23 +
>> .../QemuFlash.c | 23 +-
>> .../QemuFlashDxe.c | 15 +
>> .../QemuFlashSmm.c | 9 +
>> OvmfPkg/Sec/SecMain.c | 160 ++-
>> UefiCpuPkg/CpuDxe/CpuGdt.c | 8 +-
>> .../CpuExceptionHandlerLib/AMDSevVcHandler.c | 29 +
>> .../CpuExceptionCommon.c | 2 +-
>> .../Ia32/ArchAMDSevVcHandler.c | 24 +
>> .../PeiDxeSmmCpuException.c | 16 +
>> .../SecPeiCpuException.c | 16 +
>> .../X64/ArchAMDSevVcHandler.c | 1237 +++++++++++++++++
>> UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 114 +-
>> UefiCpuPkg/Library/MpInitLib/MpLib.c | 257 +++-
>> UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 19 +
>> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c | 249 ++++
>> UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c | 2 +-
>> MdePkg/Library/BaseLib/Ia32/VmgExit.nasm | 37 +
>> MdePkg/Library/BaseLib/Ia32/XGetBv.nasm | 31 +
>> MdePkg/Library/BaseLib/X64/VmgExit.nasm | 32 +
>> MdePkg/Library/BaseLib/X64/XGetBv.nasm | 34 +
>> OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 100 ++
>> OvmfPkg/ResetVector/Ia32/PageTables64.asm | 351 ++++-
>> OvmfPkg/ResetVector/ResetVector.nasmb | 20 +
>> .../X64/ExceptionHandlerAsm.nasm | 17 +
>> UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc | 2 +-
>> .../Library/MpInitLib/Ia32/MpFuncs.nasm | 15 +
>> UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc | 4 +-
>> UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 370 ++++-
>> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni | 15 +
>> .../ResetVector/Vtf0/Ia16/Real16ToFlat32.asm | 9 +
>> 73 files changed, 4061 insertions(+), 99 deletions(-)
>> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
>> create mode 100644 MdePkg/Include/Register/Amd/Ghcb.h
>> create mode 100644 UefiCpuPkg/Include/Library/VmgExitLib.h
>> create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcCommon.h
>> create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcHandler.c
>> create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/Ia32/ArchAMDSevVcHandler.c
>> create mode 100644 UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
>> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c
>> create mode 100644 MdePkg/Library/BaseLib/Ia32/VmgExit.nasm
>> create mode 100644 MdePkg/Library/BaseLib/Ia32/XGetBv.nasm
>> create mode 100644 MdePkg/Library/BaseLib/X64/VmgExit.nasm
>> create mode 100644 MdePkg/Library/BaseLib/X64/XGetBv.nasm
>> create mode 100644 OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
>> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni
>>
>
>
>
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
2020-04-01 20:42 ` Lendacky, Thomas
@ 2020-04-02 0:12 ` Dong, Eric
[not found] ` <1601D84A636A7BFC.25844@groups.io>
1 sibling, 0 replies; 50+ messages in thread
From: Dong, Eric @ 2020-04-02 0:12 UTC (permalink / raw)
To: devel@edk2.groups.io, thomas.lendacky@amd.com
Cc: Justen, Jordan L, Laszlo Ersek, Ard Biesheuvel, Kinney, Michael D,
Gao, Liming, Ni, Ray, Brijesh Singh, You, Benjamin, Bi, Dandan,
Dong, Guo, Wu, Hao A, Wang, Jian J, Ma, Maurice
> -----Original Message-----
> From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of
> Lendacky, Thomas
> Sent: Thursday, April 2, 2020 4:42 AM
> To: Dong, Eric <eric.dong@intel.com>; devel@edk2.groups.io
> Cc: Justen, Jordan L <jordan.l.justen@intel.com>; Laszlo Ersek
> <lersek@redhat.com>; Ard Biesheuvel <ard.biesheuvel@linaro.org>; Kinney,
> Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <liming.gao@intel.com>; Ni, Ray <ray.ni@intel.com>; Brijesh Singh
> <brijesh.singh@amd.com>; You, Benjamin <benjamin.you@intel.com>; Bi,
> Dandan <dandan.bi@intel.com>; Dong, Guo <guo.dong@intel.com>; Wu,
> Hao A <hao.a.wu@intel.com>; Wang, Jian J <jian.j.wang@intel.com>; Ma,
> Maurice <maurice.ma@intel.com>
> Subject: Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
>
> On 3/30/20 7:47 PM, Dong, Eric wrote:
> > Hi Tom,
> >
> > Sorry for late response. It’s a huge patch, please give me two more
> > weeks to detail review them.
> >
> > I have rough go through these patches and have some basic comments for
> > them now:
> >
> > 1.It’s better to spit patch if changes files not in same package. Like
> > patch 1/42.
>
> Ok, will do.
>
> >
> > 2.All functions need to have comments for them. Miss comments in patch
> > 10/42 and others.
>
> Just external functions or both external and internal (STATIC) functions, too?
All the functions.
Thanks,
Eric
>
> Thanks,
> Tom
>
> >
> > Please update patches to fix above basic checks first.
> >
> > Thanks,
> >
> > Eric
> >
> > *From:*devel@edk2.groups.io [mailto:devel@edk2.groups.io] *On Behalf
> > Of *Lendacky, Thomas
> > *Sent:* Tuesday, March 31, 2020 12:54 AM
> > *To:* devel@edk2.groups.io
> > *Cc:* Justen, Jordan L <jordan.l.justen@intel.com>; Laszlo Ersek
> > <lersek@redhat.com>; Ard Biesheuvel <ard.biesheuvel@linaro.org>;
> > Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> > <liming.gao@intel.com>; Dong, Eric <eric.dong@intel.com>; Ni, Ray
> > <ray.ni@intel.com>; Brijesh Singh <brijesh.singh@amd.com>; You,
> > Benjamin <benjamin.you@intel.com>; Bi, Dandan <dandan.bi@intel.com>;
> > Dong, Guo <guo.dong@intel.com>; Wu, Hao A <hao.a.wu@intel.com>;
> Wang,
> > Jian J <jian.j.wang@intel.com>; Ma, Maurice <maurice.ma@intel.com>
> > *Subject:* Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
> >
> > I've gotten some nice feedback from Laszlo, especially on the OvmfPkg
> > side of this patchset, but haven't seen much response from the other
> > maintainers. Is there any feedback on the MdePkg, MdeModulePkg and
> > UefiCpuPkg changes that needs to be addressed in order to merge this?
> >
> > I do have some minor changes on ensuring the per-CPU variable page
> > stays encrypted, but not much beyond that. Those changes can be
> > submitted afterwards or as a new version before inclusion.
> >
> > Thanks,
> > Tom
> >
> > On 3/24/20 12:40 PM, Tom Lendacky wrote:
> >> This patch series provides support for running EDK2/OVMF under SEV-ES.
> >>
> >> Secure Encrypted Virtualization - Encrypted State (SEV-ES) expands on
> >> the SEV support to protect the guest register state from the
> >> hypervisor. See
> >> "AMD64 Architecture Programmer's Manual Volume 2: System
> >> Programming", section "15.35 Encrypted State (SEV-ES)" [1].
> >>
> >> In order to allow a hypervisor to perform functions on behalf of a
> >> guest, there is architectural support for notifying a guest's
> >> operating system when certain types of VMEXITs are about to occur.
> >> This allows the guest to selectively share information with the
> >> hypervisor to satisfy the requested function. The notification is
> >> performed using a new exception, the VMM Communication exception
> >> (#VC). The information is shared through the Guest-Hypervisor
> Communication Block (GHCB) using the VMGEXIT instruction.
> >> The GHCB format and the protocol for using it is documented in
> >> "SEV-ES Guest-Hypervisor Communication Block Standardization" [2].
> >>
> >> The main areas of the EDK2 code that are updated to support SEV-ES
> >> are around the exception handling support and the AP boot support.
> >>
> >> Exception support is required starting in Sec, continuing through Pei
> >> and into Dxe in order to handle #VC exceptions that are generated.
> >> Each AP requires it's own GHCB page as well as a page to hold values
> >> specific to that AP.
> >>
> >> AP booting poses some interesting challenges. The INIT-SIPI-SIPI
> >> sequence is typically used to boot the APs. However, the hypervisor
> >> is not allowed to update the guest registers. The GHCB document [2]
> >> talks about how SMP booting under SEV-ES is performed.
> >>
> >> Since the GHCB page must be a shared (unencrypted) page, the
> >> processor must be running in long mode in order for the guest and
> >> hypervisor to communicate with each other. As a result, SEV-ES is
> >> only supported under the X64 architecture.
> >>
> >> [1] https://www.amd.com/system/files/TechDocs/24593.pdf
> >
> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> ww
> > .amd.com%2Fsystem%2Ffiles%2FTechDocs%2F24593.pdf&data=02%7C01%
> 7Cthomas
> > .lendacky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3dd89
> 61fe4884
> >
> e608e11a82d994e183d%7C0%7C0%7C637212125835211690&sdata=Q%2BIjeq
> %2FRDgi
> > ovKtPeA4TGDVorCK07jQVNZ7N9kvD%2BuE%3D&reserved=0>
> >> [2] https://developer.amd.com/wp-content/resources/56421.pdf
> >
> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fde
> v
> > eloper.amd.com%2Fwp-
> content%2Fresources%2F56421.pdf&data=02%7C01%7Ctho
> >
> mas.lendacky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3dd
> 8961fe4
> >
> 884e608e11a82d994e183d%7C0%7C0%7C637212125835221679&sdata=bos02
> T0YR3i5
> > xji9rhjPl7jpS5uJPKt1Q0hhdy%2FoMR0%3D&reserved=0>
> >>
> >> ---
> >>
> >> These patches are based on commit:
> >> 2f524a745e23 ("BaseTools:Fix build tools print traceback info issue")
> >>
> >> Proper execution of SEV-ES relies on Bugzilla 2340 being fixed.
> >>
> >> A version of the tree (with an extra patch to workaround Bugzilla
> >> 2340) can be found at:
> >> https://github.com/AMDESE/ovmf/tree/sev-es-v13
> >
> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit
> > hub.com%2FAMDESE%2Fovmf%2Ftree%2Fsev-es-
> v13&data=02%7C01%7Cthomas.lend
> >
> acky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3dd8961fe48
> 84e608e
> >
> 11a82d994e183d%7C0%7C0%7C637212125835221679&sdata=fmIyS5QBB7YG
> DSqTFiBI
> > e%2BBdH1zatcEplUdNC2wi%2Fhc%3D&reserved=0>
> >>
> >> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org
> >> <mailto:ard.biesheuvel@linaro.org>>
> >> Cc: Benjamin You <benjamin.you@intel.com
> >> <mailto:benjamin.you@intel.com>>
> >> Cc: Dandan Bi <dandan.bi@intel.com <mailto:dandan.bi@intel.com>>
> >> Cc: Eric Dong <eric.dong@intel.com <mailto:eric.dong@intel.com>>
> >> Cc: Guo Dong <guo.dong@intel.com <mailto:guo.dong@intel.com>>
> >> Cc: Hao A Wu <hao.a.wu@intel.com <mailto:hao.a.wu@intel.com>>
> >> Cc: Jian J Wang <jian.j.wang@intel.com
> >> <mailto:jian.j.wang@intel.com>>
> >> Cc: Jordan Justen <jordan.l.justen@intel.com
> >> <mailto:jordan.l.justen@intel.com>>
> >> Cc: Laszlo Ersek <lersek@redhat.com <mailto:lersek@redhat.com>>
> >> Cc: Liming Gao <liming.gao@intel.com <mailto:liming.gao@intel.com>>
> >> Cc: Maurice Ma <maurice.ma@intel.com <mailto:maurice.ma@intel.com>>
> >> Cc: Michael D Kinney <michael.d.kinney@intel.com
> >> <mailto:michael.d.kinney@intel.com>>
> >> Cc: Ray Ni <ray.ni@intel.com <mailto:ray.ni@intel.com>>
> >>
> >> Changes since v5:
> >> - Remove extraneous VmgExitLib usage
> >> - Miscellaneous changes to address feedback (coding style, etc.)
> >>
> >> Changes since v4:
> >> - Move the SEV-ES protocol negotiation out of the SEC exception handler
> >> and into the SecMain.c file. As a result:
> >> - Move the SecGhcb related PCDs out of UefiCpuPkg and into OvmfPkg
> >> - Combine SecAMDSevVcHandler.c and PeiDxeAMDSevVcHandler.c into
> a
> >> single AMDSevVcHandler.c
> >> - Consolidate VmgExitLib usage into common LibraryClasses sections
> >> - Add documentation comments to the VmgExitLib functions
> >>
> >> Changes since v3:
> >> - Remove the need for the MP library finalization routine. The AP
> >> jump table address will be held by the hypervisor rather than
> >> communicated via the GHCB MSR. This removes some fragility around
> >> the UEFI to OS transition.
> >> - Rename the SEV-ES RIP reset area to SEV-ES workarea and use it to
> >> communicate the SEV-ES status, so that SEC CPU exception handling is
> >> only established for an SEV-ES guest.
> >> - Fix SMM build breakageAdd around QemuFlashPtrWrite().
> >> - Fix SMM build breakage by adding VC exception support the SMM CPU
> >> exception handling.
> >> - Add memory fencing around the invocation of AsmVmgExit().
> >> - Clarify comments around the SEV-ES AP reset RIP values and usage.
> >> - Move some PCD definitions from MdeModulePkg to UefiCpuPkg.
> >> - Remove the 16-bit code selector definition from MdeModulePkg
> >>
> >> Changes since v2:
> >> - Added a way to locate the SEV-ES fixed AP RIP address for starting
> >> AP's to avoid updating the actual flash image (build time location
> >> that is identified with a GUID value).
> >> - Create a VmgExit library to replace static inline functions.
> >> - Move some PCDs to the appropriate packages
> >> - Add support for writing to QEMU flash under SEV-ES
> >> - Add additional MMIO opcode support
> >> - Cleaned up the GHCB MSR CPUID protocol support
> >>
> >> Changes since v1:
> >> - Patches reworked to be more specific to the component/area being
> updated
> >> and order of definition/usage
> >> - Created a library for VMGEXIT-related functions to replace use of inline
> >> functions
> >> - Allocation method for GDT changed from AllocatePool to
> >> AllocatePages
> >> - Early caching only enabled for SEV-ES guests
> >> - Ensure AP loop mode set to halt loop mode for SEV-ES guests
> >> - Reserved SEC GHCB-related memory areas when S3 is enabled
> >>
> >> Tom Lendacky (42):
> >> MdePkg: Create PCDs to be used in support of SEV-ES
> >> MdePkg: Add the MSR definition for the GHCB register
> >> MdePkg: Add a structure definition for the GHCB
> >> MdeModulePkg/DxeIplPeim: Support GHCB pages when creating page
> tables
> >> MdePkg/BaseLib: Add support for the XGETBV instruction
> >> MdePkg/BaseLib: Add support for the VMGEXIT instruction
> >> UefiCpuPkg: Implement library support for VMGEXIT
> >> OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library
> >> UefiPayloadPkg: Prepare UefiPayloadPkg to use the VmgExitLib library
> >> UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC
> exception
> >> UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE
> events
> >> UefiCpuPkg/CpuExceptionHandler: Support string IO for IOIO_PROT NAE
> >> events
> >> UefiCpuPkg/CpuExceptionHandler: Add support for CPUID NAE events
> >> UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT NAE
> events
> >> UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE events
> (MMIO)
> >> UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE
> events
> >> UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC NAE events
> >> UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC NAE events
> >> UefiCpuPkg/CpuExceptionHandler: Add support for INVD NAE events
> >> UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL NAE
> events
> >> UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP NAE events
> >> UefiCpuPkg/CpuExceptionHandler: Add support for
> MONITOR/MONITORX NAE
> >> events
> >> UefiCpuPkg/CpuExceptionHandler: Add support for MWAIT/MWAITX
> NAE
> >> events
> >> UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write
> NAE
> >> events
> >> OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator function
> >> OvmfPkg: Add support to perform SEV-ES initialization
> >> OvmfPkg: Create a GHCB page for use during Sec phase
> >> OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is supported
> >> OvmfPkg: Create GHCB pages for use during Pei and Dxe phase
> >> OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is enabled
> >> UefiCpuPkg: Create an SEV-ES workarea PCD
> >> OvmfPkg: Reserve a page in memory for the SEV-ES usage
> >> OvmfPkg/ResetVector: Add support for a 32-bit SEV check
> >> OvmfPkg/Sec: Add #VC exception handling for Sec phase
> >> OvmfPkg/Sec: Enable cache early to speed up booting
> >> OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash detection
> with
> >> SEV-ES is enabled
> >> UefiCpuPkg: Add a 16-bit protected mode code segment descriptor
> >> UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is
> >> enabled
> >> UefiCpuPkg: Allow AP booting under SEV-ES
> >> OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector
> >> OvmfPkg: Move the GHCB allocations into reserved memory
> >> UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use
> >>
> >> MdeModulePkg/MdeModulePkg.dec | 9 +
> >> OvmfPkg/OvmfPkg.dec | 9 +
> >> UefiCpuPkg/UefiCpuPkg.dec | 17 +
> >> OvmfPkg/OvmfPkgIa32.dsc | 6 +
> >> OvmfPkg/OvmfPkgIa32X64.dsc | 6 +
> >> OvmfPkg/OvmfPkgX64.dsc | 6 +
> >> OvmfPkg/OvmfXen.dsc | 1 +
> >> UefiCpuPkg/UefiCpuPkg.dsc | 2 +
> >> UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 2 +
> >> UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc | 2 +
> >> OvmfPkg/OvmfPkgX64.fdf | 9 +
> >> MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf | 2 +
> >> MdePkg/Library/BaseLib/BaseLib.inf | 4 +
> >> OvmfPkg/PlatformPei/PlatformPei.inf | 7 +
> >> .../FvbServicesRuntimeDxe.inf | 2 +
> >> OvmfPkg/ResetVector/ResetVector.inf | 8 +
> >> OvmfPkg/Sec/SecMain.inf | 4 +
> >> .../DxeCpuExceptionHandlerLib.inf | 5 +
> >> .../PeiCpuExceptionHandlerLib.inf | 5 +
> >> .../SecPeiCpuExceptionHandlerLib.inf | 5 +
> >> .../SmmCpuExceptionHandlerLib.inf | 5 +
> >> UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf | 4 +
> >> UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 4 +
> >> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf | 33 +
> >> .../Core/DxeIplPeim/X64/VirtualMemory.h | 12 +-
> >> MdePkg/Include/Library/BaseLib.h | 31 +
> >> MdePkg/Include/Register/Amd/Fam17Msr.h | 42 +
> >> MdePkg/Include/Register/Amd/Ghcb.h | 136 ++
> >> OvmfPkg/Include/Library/MemEncryptSevLib.h | 12 +
> >> .../QemuFlash.h | 6 +
> >> UefiCpuPkg/CpuDxe/CpuGdt.h | 4 +-
> >> UefiCpuPkg/Include/Library/VmgExitLib.h | 111 ++
> >> .../CpuExceptionHandlerLib/AMDSevVcCommon.h | 26 +
> >> .../CpuExceptionCommon.h | 2 +
> >> UefiCpuPkg/Library/MpInitLib/MpLib.h | 68 +-
> >> .../Core/DxeIplPeim/Ia32/DxeLoadFunc.c | 4 +-
> >> .../Core/DxeIplPeim/X64/DxeLoadFunc.c | 11 +-
> >> .../Core/DxeIplPeim/X64/VirtualMemory.c | 49 +-
> >> MdePkg/Library/BaseLib/Ia32/GccInline.c | 45 +
> >> MdePkg/Library/BaseLib/X64/GccInline.c | 47 +
> >> .../MemEncryptSevLibInternal.c | 75 +-
> >> OvmfPkg/PlatformPei/AmdSev.c | 82 ++
> >> OvmfPkg/PlatformPei/MemDetect.c | 23 +
> >> .../QemuFlash.c | 23 +-
> >> .../QemuFlashDxe.c | 15 +
> >> .../QemuFlashSmm.c | 9 +
> >> OvmfPkg/Sec/SecMain.c | 160 ++-
> >> UefiCpuPkg/CpuDxe/CpuGdt.c | 8 +-
> >> .../CpuExceptionHandlerLib/AMDSevVcHandler.c | 29 +
> >> .../CpuExceptionCommon.c | 2 +-
> >> .../Ia32/ArchAMDSevVcHandler.c | 24 +
> >> .../PeiDxeSmmCpuException.c | 16 +
> >> .../SecPeiCpuException.c | 16 +
> >> .../X64/ArchAMDSevVcHandler.c | 1237 +++++++++++++++++
> >> UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 114 +-
> >> UefiCpuPkg/Library/MpInitLib/MpLib.c | 257 +++-
> >> UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 19 +
> >> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c | 249 ++++
> >> UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c | 2 +-
> >> MdePkg/Library/BaseLib/Ia32/VmgExit.nasm | 37 +
> >> MdePkg/Library/BaseLib/Ia32/XGetBv.nasm | 31 +
> >> MdePkg/Library/BaseLib/X64/VmgExit.nasm | 32 +
> >> MdePkg/Library/BaseLib/X64/XGetBv.nasm | 34 +
> >> OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 100 ++
> >> OvmfPkg/ResetVector/Ia32/PageTables64.asm | 351 ++++-
> >> OvmfPkg/ResetVector/ResetVector.nasmb | 20 +
> >> .../X64/ExceptionHandlerAsm.nasm | 17 +
> >> UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc | 2 +-
> >> .../Library/MpInitLib/Ia32/MpFuncs.nasm | 15 +
> >> UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc | 4 +-
> >> UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 370 ++++-
> >> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni | 15 +
> >> .../ResetVector/Vtf0/Ia16/Real16ToFlat32.asm | 9 +
> >> 73 files changed, 4061 insertions(+), 99 deletions(-)
> >> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
> >> create mode 100644 MdePkg/Include/Register/Amd/Ghcb.h
> >> create mode 100644 UefiCpuPkg/Include/Library/VmgExitLib.h
> >> create mode 100644
> UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcCommon.h
> >> create mode 100644
> UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcHandler.c
> >> create mode 100644
> UefiCpuPkg/Library/CpuExceptionHandlerLib/Ia32/ArchAMDSevVcHandler.c
> >> create mode 100644
> UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
> >> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c
> >> create mode 100644 MdePkg/Library/BaseLib/Ia32/VmgExit.nasm
> >> create mode 100644 MdePkg/Library/BaseLib/Ia32/XGetBv.nasm
> >> create mode 100644 MdePkg/Library/BaseLib/X64/VmgExit.nasm
> >> create mode 100644 MdePkg/Library/BaseLib/X64/XGetBv.nasm
> >> create mode 100644 OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
> >> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni
> >>
> >
> >
> >
>
>
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
[not found] ` <1601D84A636A7BFC.25844@groups.io>
@ 2020-04-14 15:30 ` Dong, Eric
2020-04-16 13:46 ` Lendacky, Thomas
0 siblings, 1 reply; 50+ messages in thread
From: Dong, Eric @ 2020-04-14 15:30 UTC (permalink / raw)
To: devel@edk2.groups.io, Dong, Eric, thomas.lendacky@amd.com
Cc: Justen, Jordan L, Laszlo Ersek, Ard Biesheuvel, Kinney, Michael D,
Gao, Liming, Ni, Ray, Brijesh Singh, You, Benjamin, Bi, Dandan,
Dong, Guo, Wu, Hao A, Wang, Jian J, Ma, Maurice
> > -----Original Message-----
> > From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of
> > Lendacky, Thomas
> > Sent: Thursday, April 2, 2020 4:42 AM
> > To: Dong, Eric <eric.dong@intel.com>; devel@edk2.groups.io
> > Cc: Justen, Jordan L <jordan.l.justen@intel.com>; Laszlo Ersek
> > <lersek@redhat.com>; Ard Biesheuvel <ard.biesheuvel@linaro.org>;
> > Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> > <liming.gao@intel.com>; Ni, Ray <ray.ni@intel.com>; Brijesh Singh
> > <brijesh.singh@amd.com>; You, Benjamin <benjamin.you@intel.com>; Bi,
> > Dandan <dandan.bi@intel.com>; Dong, Guo <guo.dong@intel.com>; Wu,
> Hao
> > A <hao.a.wu@intel.com>; Wang, Jian J <jian.j.wang@intel.com>; Ma,
> > Maurice <maurice.ma@intel.com>
> > Subject: Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
> >
> > On 3/30/20 7:47 PM, Dong, Eric wrote:
> > > Hi Tom,
> > >
> > > Sorry for late response. It’s a huge patch, please give me two more
> > > weeks to detail review them.
> > >
> > > I have rough go through these patches and have some basic comments
> > > for them now:
> > >
> > > 1.It’s better to spit patch if changes files not in same package.
> > > Like patch 1/42.
> >
> > Ok, will do.
> >
> > >
> > > 2.All functions need to have comments for them. Miss comments in
> > > patch
> > > 10/42 and others.
> >
> > Just external functions or both external and internal (STATIC) functions, too?
>
> All the functions.
you can use ECC tool to help you find all the coding style related issues.
You can reference link https://github.com/tianocore/tianocore.github.io/wiki/ECC-tool to know how to run this tool.
Thanks,
Eric
>
> Thanks,
> Eric
>
> >
> > Thanks,
> > Tom
> >
> > >
> > > Please update patches to fix above basic checks first.
> > >
> > > Thanks,
> > >
> > > Eric
> > >
> > > *From:*devel@edk2.groups.io [mailto:devel@edk2.groups.io] *On
> Behalf
> > > Of *Lendacky, Thomas
> > > *Sent:* Tuesday, March 31, 2020 12:54 AM
> > > *To:* devel@edk2.groups.io
> > > *Cc:* Justen, Jordan L <jordan.l.justen@intel.com>; Laszlo Ersek
> > > <lersek@redhat.com>; Ard Biesheuvel <ard.biesheuvel@linaro.org>;
> > > Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> > > <liming.gao@intel.com>; Dong, Eric <eric.dong@intel.com>; Ni, Ray
> > > <ray.ni@intel.com>; Brijesh Singh <brijesh.singh@amd.com>; You,
> > > Benjamin <benjamin.you@intel.com>; Bi, Dandan
> <dandan.bi@intel.com>;
> > > Dong, Guo <guo.dong@intel.com>; Wu, Hao A <hao.a.wu@intel.com>;
> > Wang,
> > > Jian J <jian.j.wang@intel.com>; Ma, Maurice <maurice.ma@intel.com>
> > > *Subject:* Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
> > >
> > > I've gotten some nice feedback from Laszlo, especially on the
> > > OvmfPkg side of this patchset, but haven't seen much response from
> > > the other maintainers. Is there any feedback on the MdePkg,
> > > MdeModulePkg and UefiCpuPkg changes that needs to be addressed in
> order to merge this?
> > >
> > > I do have some minor changes on ensuring the per-CPU variable page
> > > stays encrypted, but not much beyond that. Those changes can be
> > > submitted afterwards or as a new version before inclusion.
> > >
> > > Thanks,
> > > Tom
> > >
> > > On 3/24/20 12:40 PM, Tom Lendacky wrote:
> > >> This patch series provides support for running EDK2/OVMF under SEV-
> ES.
> > >>
> > >> Secure Encrypted Virtualization - Encrypted State (SEV-ES) expands
> > >> on the SEV support to protect the guest register state from the
> > >> hypervisor. See
> > >> "AMD64 Architecture Programmer's Manual Volume 2: System
> > >> Programming", section "15.35 Encrypted State (SEV-ES)" [1].
> > >>
> > >> In order to allow a hypervisor to perform functions on behalf of a
> > >> guest, there is architectural support for notifying a guest's
> > >> operating system when certain types of VMEXITs are about to occur.
> > >> This allows the guest to selectively share information with the
> > >> hypervisor to satisfy the requested function. The notification is
> > >> performed using a new exception, the VMM Communication exception
> > >> (#VC). The information is shared through the Guest-Hypervisor
> > Communication Block (GHCB) using the VMGEXIT instruction.
> > >> The GHCB format and the protocol for using it is documented in
> > >> "SEV-ES Guest-Hypervisor Communication Block Standardization" [2].
> > >>
> > >> The main areas of the EDK2 code that are updated to support SEV-ES
> > >> are around the exception handling support and the AP boot support.
> > >>
> > >> Exception support is required starting in Sec, continuing through
> > >> Pei and into Dxe in order to handle #VC exceptions that are generated.
> > >> Each AP requires it's own GHCB page as well as a page to hold
> > >> values specific to that AP.
> > >>
> > >> AP booting poses some interesting challenges. The INIT-SIPI-SIPI
> > >> sequence is typically used to boot the APs. However, the hypervisor
> > >> is not allowed to update the guest registers. The GHCB document [2]
> > >> talks about how SMP booting under SEV-ES is performed.
> > >>
> > >> Since the GHCB page must be a shared (unencrypted) page, the
> > >> processor must be running in long mode in order for the guest and
> > >> hypervisor to communicate with each other. As a result, SEV-ES is
> > >> only supported under the X64 architecture.
> > >>
> > >> [1] https://www.amd.com/system/files/TechDocs/24593.pdf
> > >
> >
> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> > ww
> > > .amd.com%2Fsystem%2Ffiles%2FTechDocs%2F24593.pdf&data=02%7C01%
> > 7Cthomas
> > > .lendacky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3dd8
> 9
> > 61fe4884
> > >
> >
> e608e11a82d994e183d%7C0%7C0%7C637212125835211690&sdata=Q%2BIjeq
> > %2FRDgi
> > > ovKtPeA4TGDVorCK07jQVNZ7N9kvD%2BuE%3D&reserved=0>
> > >> [2] https://developer.amd.com/wp-content/resources/56421.pdf
> > >
> >
> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fde
> > v
> > > eloper.amd.com%2Fwp-
> > content%2Fresources%2F56421.pdf&data=02%7C01%7Ctho
> > >
> >
> mas.lendacky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3dd
> > 8961fe4
> > >
> >
> 884e608e11a82d994e183d%7C0%7C0%7C637212125835221679&sdata=bos02
> > T0YR3i5
> > > xji9rhjPl7jpS5uJPKt1Q0hhdy%2FoMR0%3D&reserved=0>
> > >>
> > >> ---
> > >>
> > >> These patches are based on commit:
> > >> 2f524a745e23 ("BaseTools:Fix build tools print traceback info
> > >> issue")
> > >>
> > >> Proper execution of SEV-ES relies on Bugzilla 2340 being fixed.
> > >>
> > >> A version of the tree (with an extra patch to workaround Bugzilla
> > >> 2340) can be found at:
> > >> https://github.com/AMDESE/ovmf/tree/sev-es-v13
> > >
> >
> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit
> > > hub.com%2FAMDESE%2Fovmf%2Ftree%2Fsev-es-
> > v13&data=02%7C01%7Cthomas.lend
> > >
> >
> acky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3dd8961fe48
> > 84e608e
> > >
> >
> 11a82d994e183d%7C0%7C0%7C637212125835221679&sdata=fmIyS5QBB7YG
> > DSqTFiBI
> > > e%2BBdH1zatcEplUdNC2wi%2Fhc%3D&reserved=0>
> > >>
> > >> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org
> > >> <mailto:ard.biesheuvel@linaro.org>>
> > >> Cc: Benjamin You <benjamin.you@intel.com
> > >> <mailto:benjamin.you@intel.com>>
> > >> Cc: Dandan Bi <dandan.bi@intel.com <mailto:dandan.bi@intel.com>>
> > >> Cc: Eric Dong <eric.dong@intel.com <mailto:eric.dong@intel.com>>
> > >> Cc: Guo Dong <guo.dong@intel.com <mailto:guo.dong@intel.com>>
> > >> Cc: Hao A Wu <hao.a.wu@intel.com <mailto:hao.a.wu@intel.com>>
> > >> Cc: Jian J Wang <jian.j.wang@intel.com
> > >> <mailto:jian.j.wang@intel.com>>
> > >> Cc: Jordan Justen <jordan.l.justen@intel.com
> > >> <mailto:jordan.l.justen@intel.com>>
> > >> Cc: Laszlo Ersek <lersek@redhat.com <mailto:lersek@redhat.com>>
> > >> Cc: Liming Gao <liming.gao@intel.com <mailto:liming.gao@intel.com>>
> > >> Cc: Maurice Ma <maurice.ma@intel.com
> <mailto:maurice.ma@intel.com>>
> > >> Cc: Michael D Kinney <michael.d.kinney@intel.com
> > >> <mailto:michael.d.kinney@intel.com>>
> > >> Cc: Ray Ni <ray.ni@intel.com <mailto:ray.ni@intel.com>>
> > >>
> > >> Changes since v5:
> > >> - Remove extraneous VmgExitLib usage
> > >> - Miscellaneous changes to address feedback (coding style, etc.)
> > >>
> > >> Changes since v4:
> > >> - Move the SEV-ES protocol negotiation out of the SEC exception
> handler
> > >> and into the SecMain.c file. As a result:
> > >> - Move the SecGhcb related PCDs out of UefiCpuPkg and into
> OvmfPkg
> > >> - Combine SecAMDSevVcHandler.c and PeiDxeAMDSevVcHandler.c
> into
> > a
> > >> single AMDSevVcHandler.c
> > >> - Consolidate VmgExitLib usage into common LibraryClasses sections
> > >> - Add documentation comments to the VmgExitLib functions
> > >>
> > >> Changes since v3:
> > >> - Remove the need for the MP library finalization routine. The AP
> > >> jump table address will be held by the hypervisor rather than
> > >> communicated via the GHCB MSR. This removes some fragility around
> > >> the UEFI to OS transition.
> > >> - Rename the SEV-ES RIP reset area to SEV-ES workarea and use it to
> > >> communicate the SEV-ES status, so that SEC CPU exception handling is
> > >> only established for an SEV-ES guest.
> > >> - Fix SMM build breakageAdd around QemuFlashPtrWrite().
> > >> - Fix SMM build breakage by adding VC exception support the SMM CPU
> > >> exception handling.
> > >> - Add memory fencing around the invocation of AsmVmgExit().
> > >> - Clarify comments around the SEV-ES AP reset RIP values and usage.
> > >> - Move some PCD definitions from MdeModulePkg to UefiCpuPkg.
> > >> - Remove the 16-bit code selector definition from MdeModulePkg
> > >>
> > >> Changes since v2:
> > >> - Added a way to locate the SEV-ES fixed AP RIP address for starting
> > >> AP's to avoid updating the actual flash image (build time location
> > >> that is identified with a GUID value).
> > >> - Create a VmgExit library to replace static inline functions.
> > >> - Move some PCDs to the appropriate packages
> > >> - Add support for writing to QEMU flash under SEV-ES
> > >> - Add additional MMIO opcode support
> > >> - Cleaned up the GHCB MSR CPUID protocol support
> > >>
> > >> Changes since v1:
> > >> - Patches reworked to be more specific to the component/area being
> > updated
> > >> and order of definition/usage
> > >> - Created a library for VMGEXIT-related functions to replace use of inline
> > >> functions
> > >> - Allocation method for GDT changed from AllocatePool to
> > >> AllocatePages
> > >> - Early caching only enabled for SEV-ES guests
> > >> - Ensure AP loop mode set to halt loop mode for SEV-ES guests
> > >> - Reserved SEC GHCB-related memory areas when S3 is enabled
> > >>
> > >> Tom Lendacky (42):
> > >> MdePkg: Create PCDs to be used in support of SEV-ES
> > >> MdePkg: Add the MSR definition for the GHCB register
> > >> MdePkg: Add a structure definition for the GHCB
> > >> MdeModulePkg/DxeIplPeim: Support GHCB pages when creating page
> > tables
> > >> MdePkg/BaseLib: Add support for the XGETBV instruction
> > >> MdePkg/BaseLib: Add support for the VMGEXIT instruction
> > >> UefiCpuPkg: Implement library support for VMGEXIT
> > >> OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library
> > >> UefiPayloadPkg: Prepare UefiPayloadPkg to use the VmgExitLib library
> > >> UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC
> > exception
> > >> UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE
> > events
> > >> UefiCpuPkg/CpuExceptionHandler: Support string IO for IOIO_PROT
> NAE
> > >> events
> > >> UefiCpuPkg/CpuExceptionHandler: Add support for CPUID NAE events
> > >> UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT NAE
> > events
> > >> UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE events
> > (MMIO)
> > >> UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE
> > events
> > >> UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC NAE events
> > >> UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC NAE
> events
> > >> UefiCpuPkg/CpuExceptionHandler: Add support for INVD NAE events
> > >> UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL NAE
> > events
> > >> UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP NAE
> events
> > >> UefiCpuPkg/CpuExceptionHandler: Add support for
> > MONITOR/MONITORX NAE
> > >> events
> > >> UefiCpuPkg/CpuExceptionHandler: Add support for MWAIT/MWAITX
> > NAE
> > >> events
> > >> UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write
> > NAE
> > >> events
> > >> OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator function
> > >> OvmfPkg: Add support to perform SEV-ES initialization
> > >> OvmfPkg: Create a GHCB page for use during Sec phase
> > >> OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is supported
> > >> OvmfPkg: Create GHCB pages for use during Pei and Dxe phase
> > >> OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is
> enabled
> > >> UefiCpuPkg: Create an SEV-ES workarea PCD
> > >> OvmfPkg: Reserve a page in memory for the SEV-ES usage
> > >> OvmfPkg/ResetVector: Add support for a 32-bit SEV check
> > >> OvmfPkg/Sec: Add #VC exception handling for Sec phase
> > >> OvmfPkg/Sec: Enable cache early to speed up booting
> > >> OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash detection
> > with
> > >> SEV-ES is enabled
> > >> UefiCpuPkg: Add a 16-bit protected mode code segment descriptor
> > >> UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is
> > >> enabled
> > >> UefiCpuPkg: Allow AP booting under SEV-ES
> > >> OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector
> > >> OvmfPkg: Move the GHCB allocations into reserved memory
> > >> UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use
> > >>
> > >> MdeModulePkg/MdeModulePkg.dec | 9 +
> > >> OvmfPkg/OvmfPkg.dec | 9 +
> > >> UefiCpuPkg/UefiCpuPkg.dec | 17 +
> > >> OvmfPkg/OvmfPkgIa32.dsc | 6 +
> > >> OvmfPkg/OvmfPkgIa32X64.dsc | 6 +
> > >> OvmfPkg/OvmfPkgX64.dsc | 6 +
> > >> OvmfPkg/OvmfXen.dsc | 1 +
> > >> UefiCpuPkg/UefiCpuPkg.dsc | 2 +
> > >> UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 2 +
> > >> UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc | 2 +
> > >> OvmfPkg/OvmfPkgX64.fdf | 9 +
> > >> MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf | 2 +
> > >> MdePkg/Library/BaseLib/BaseLib.inf | 4 +
> > >> OvmfPkg/PlatformPei/PlatformPei.inf | 7 +
> > >> .../FvbServicesRuntimeDxe.inf | 2 +
> > >> OvmfPkg/ResetVector/ResetVector.inf | 8 +
> > >> OvmfPkg/Sec/SecMain.inf | 4 +
> > >> .../DxeCpuExceptionHandlerLib.inf | 5 +
> > >> .../PeiCpuExceptionHandlerLib.inf | 5 +
> > >> .../SecPeiCpuExceptionHandlerLib.inf | 5 +
> > >> .../SmmCpuExceptionHandlerLib.inf | 5 +
> > >> UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf | 4 +
> > >> UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 4 +
> > >> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf | 33 +
> > >> .../Core/DxeIplPeim/X64/VirtualMemory.h | 12 +-
> > >> MdePkg/Include/Library/BaseLib.h | 31 +
> > >> MdePkg/Include/Register/Amd/Fam17Msr.h | 42 +
> > >> MdePkg/Include/Register/Amd/Ghcb.h | 136 ++
> > >> OvmfPkg/Include/Library/MemEncryptSevLib.h | 12 +
> > >> .../QemuFlash.h | 6 +
> > >> UefiCpuPkg/CpuDxe/CpuGdt.h | 4 +-
> > >> UefiCpuPkg/Include/Library/VmgExitLib.h | 111 ++
> > >> .../CpuExceptionHandlerLib/AMDSevVcCommon.h | 26 +
> > >> .../CpuExceptionCommon.h | 2 +
> > >> UefiCpuPkg/Library/MpInitLib/MpLib.h | 68 +-
> > >> .../Core/DxeIplPeim/Ia32/DxeLoadFunc.c | 4 +-
> > >> .../Core/DxeIplPeim/X64/DxeLoadFunc.c | 11 +-
> > >> .../Core/DxeIplPeim/X64/VirtualMemory.c | 49 +-
> > >> MdePkg/Library/BaseLib/Ia32/GccInline.c | 45 +
> > >> MdePkg/Library/BaseLib/X64/GccInline.c | 47 +
> > >> .../MemEncryptSevLibInternal.c | 75 +-
> > >> OvmfPkg/PlatformPei/AmdSev.c | 82 ++
> > >> OvmfPkg/PlatformPei/MemDetect.c | 23 +
> > >> .../QemuFlash.c | 23 +-
> > >> .../QemuFlashDxe.c | 15 +
> > >> .../QemuFlashSmm.c | 9 +
> > >> OvmfPkg/Sec/SecMain.c | 160 ++-
> > >> UefiCpuPkg/CpuDxe/CpuGdt.c | 8 +-
> > >> .../CpuExceptionHandlerLib/AMDSevVcHandler.c | 29 +
> > >> .../CpuExceptionCommon.c | 2 +-
> > >> .../Ia32/ArchAMDSevVcHandler.c | 24 +
> > >> .../PeiDxeSmmCpuException.c | 16 +
> > >> .../SecPeiCpuException.c | 16 +
> > >> .../X64/ArchAMDSevVcHandler.c | 1237 +++++++++++++++++
> > >> UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 114 +-
> > >> UefiCpuPkg/Library/MpInitLib/MpLib.c | 257 +++-
> > >> UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 19 +
> > >> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c | 249 ++++
> > >> UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c | 2 +-
> > >> MdePkg/Library/BaseLib/Ia32/VmgExit.nasm | 37 +
> > >> MdePkg/Library/BaseLib/Ia32/XGetBv.nasm | 31 +
> > >> MdePkg/Library/BaseLib/X64/VmgExit.nasm | 32 +
> > >> MdePkg/Library/BaseLib/X64/XGetBv.nasm | 34 +
> > >> OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 100 ++
> > >> OvmfPkg/ResetVector/Ia32/PageTables64.asm | 351 ++++-
> > >> OvmfPkg/ResetVector/ResetVector.nasmb | 20 +
> > >> .../X64/ExceptionHandlerAsm.nasm | 17 +
> > >> UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc | 2 +-
> > >> .../Library/MpInitLib/Ia32/MpFuncs.nasm | 15 +
> > >> UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc | 4 +-
> > >> UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 370 ++++-
> > >> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni | 15 +
> > >> .../ResetVector/Vtf0/Ia16/Real16ToFlat32.asm | 9 +
> > >> 73 files changed, 4061 insertions(+), 99 deletions(-)
> > >> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
> > >> create mode 100644 MdePkg/Include/Register/Amd/Ghcb.h
> > >> create mode 100644 UefiCpuPkg/Include/Library/VmgExitLib.h
> > >> create mode 100644
> > UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcCommon.h
> > >> create mode 100644
> > UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcHandler.c
> > >> create mode 100644
> >
> UefiCpuPkg/Library/CpuExceptionHandlerLib/Ia32/ArchAMDSevVcHandler.c
> > >> create mode 100644
> >
> UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
> > >> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c
> > >> create mode 100644 MdePkg/Library/BaseLib/Ia32/VmgExit.nasm
> > >> create mode 100644 MdePkg/Library/BaseLib/Ia32/XGetBv.nasm
> > >> create mode 100644 MdePkg/Library/BaseLib/X64/VmgExit.nasm
> > >> create mode 100644 MdePkg/Library/BaseLib/X64/XGetBv.nasm
> > >> create mode 100644 OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
> > >> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni
> > >>
> > >
> > >
> > >
> >
> >
>
>
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
2020-04-14 15:30 ` Dong, Eric
@ 2020-04-16 13:46 ` Lendacky, Thomas
2020-04-17 9:10 ` Dong, Eric
0 siblings, 1 reply; 50+ messages in thread
From: Lendacky, Thomas @ 2020-04-16 13:46 UTC (permalink / raw)
To: devel, eric.dong
Cc: Justen, Jordan L, Laszlo Ersek, Ard Biesheuvel, Kinney, Michael D,
Gao, Liming, Ni, Ray, Brijesh Singh, You, Benjamin, Bi, Dandan,
Dong, Guo, Wu, Hao A, Wang, Jian J, Ma, Maurice
On 4/14/20 10:30 AM, Dong, Eric via groups.io wrote:
>>> -----Original Message-----
>>> From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of
>>> Lendacky, Thomas
>>> Sent: Thursday, April 2, 2020 4:42 AM
>>> To: Dong, Eric <eric.dong@intel.com>; devel@edk2.groups.io
>>> Cc: Justen, Jordan L <jordan.l.justen@intel.com>; Laszlo Ersek
>>> <lersek@redhat.com>; Ard Biesheuvel <ard.biesheuvel@linaro.org>;
>>> Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
>>> <liming.gao@intel.com>; Ni, Ray <ray.ni@intel.com>; Brijesh Singh
>>> <brijesh.singh@amd.com>; You, Benjamin <benjamin.you@intel.com>; Bi,
>>> Dandan <dandan.bi@intel.com>; Dong, Guo <guo.dong@intel.com>; Wu,
>> Hao
>>> A <hao.a.wu@intel.com>; Wang, Jian J <jian.j.wang@intel.com>; Ma,
>>> Maurice <maurice.ma@intel.com>
>>> Subject: Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
>>>
>>> On 3/30/20 7:47 PM, Dong, Eric wrote:
>>>> Hi Tom,
>>>>
>>>> Sorry for late response. It’s a huge patch, please give me two more
>>>> weeks to detail review them.
>>>>
>>>> I have rough go through these patches and have some basic comments
>>>> for them now:
>>>>
>>>> 1.It’s better to spit patch if changes files not in same package.
>>>> Like patch 1/42.
>>>
>>> Ok, will do.
>>>
>>>>
>>>> 2.All functions need to have comments for them. Miss comments in
>>>> patch
>>>> 10/42 and others.
>>>
>>> Just external functions or both external and internal (STATIC) functions, too?
>>
>> All the functions.
>
> you can use ECC tool to help you find all the coding style related issues.
> You can reference link https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Ftianocore%2Ftianocore.github.io%2Fwiki%2FECC-tool&data=02%7C01%7Cthomas.lendacky%40amd.com%7C437e3b872cc046cf645208d7e088d6dc%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637224752713456520&sdata=rjRgLrtyDu2dXoRddbaTWkPtENLLZK93MEsmxR36Fkc%3D&reserved=0 to know how to run this tool.
Thanks for the pointer. I have addressed all issues identified by ECC with
respect to the code that I have added with these patches.
Are you waiting for another version with these changes before reviewing
further? If so, I'll submit that now, otherwise I'll wait for your review
of the current version.
Thanks,
Tom
>
> Thanks,
> Eric
>>
>> Thanks,
>> Eric
>>
>>>
>>> Thanks,
>>> Tom
>>>
>>>>
>>>> Please update patches to fix above basic checks first.
>>>>
>>>> Thanks,
>>>>
>>>> Eric
>>>>
>>>> *From:*devel@edk2.groups.io [mailto:devel@edk2.groups.io] *On
>> Behalf
>>>> Of *Lendacky, Thomas
>>>> *Sent:* Tuesday, March 31, 2020 12:54 AM
>>>> *To:* devel@edk2.groups.io
>>>> *Cc:* Justen, Jordan L <jordan.l.justen@intel.com>; Laszlo Ersek
>>>> <lersek@redhat.com>; Ard Biesheuvel <ard.biesheuvel@linaro.org>;
>>>> Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
>>>> <liming.gao@intel.com>; Dong, Eric <eric.dong@intel.com>; Ni, Ray
>>>> <ray.ni@intel.com>; Brijesh Singh <brijesh.singh@amd.com>; You,
>>>> Benjamin <benjamin.you@intel.com>; Bi, Dandan
>> <dandan.bi@intel.com>;
>>>> Dong, Guo <guo.dong@intel.com>; Wu, Hao A <hao.a.wu@intel.com>;
>>> Wang,
>>>> Jian J <jian.j.wang@intel.com>; Ma, Maurice <maurice.ma@intel.com>
>>>> *Subject:* Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
>>>>
>>>> I've gotten some nice feedback from Laszlo, especially on the
>>>> OvmfPkg side of this patchset, but haven't seen much response from
>>>> the other maintainers. Is there any feedback on the MdePkg,
>>>> MdeModulePkg and UefiCpuPkg changes that needs to be addressed in
>> order to merge this?
>>>>
>>>> I do have some minor changes on ensuring the per-CPU variable page
>>>> stays encrypted, but not much beyond that. Those changes can be
>>>> submitted afterwards or as a new version before inclusion.
>>>>
>>>> Thanks,
>>>> Tom
>>>>
>>>> On 3/24/20 12:40 PM, Tom Lendacky wrote:
>>>>> This patch series provides support for running EDK2/OVMF under SEV-
>> ES.
>>>>>
>>>>> Secure Encrypted Virtualization - Encrypted State (SEV-ES) expands
>>>>> on the SEV support to protect the guest register state from the
>>>>> hypervisor. See
>>>>> "AMD64 Architecture Programmer's Manual Volume 2: System
>>>>> Programming", section "15.35 Encrypted State (SEV-ES)" [1].
>>>>>
>>>>> In order to allow a hypervisor to perform functions on behalf of a
>>>>> guest, there is architectural support for notifying a guest's
>>>>> operating system when certain types of VMEXITs are about to occur.
>>>>> This allows the guest to selectively share information with the
>>>>> hypervisor to satisfy the requested function. The notification is
>>>>> performed using a new exception, the VMM Communication exception
>>>>> (#VC). The information is shared through the Guest-Hypervisor
>>> Communication Block (GHCB) using the VMGEXIT instruction.
>>>>> The GHCB format and the protocol for using it is documented in
>>>>> "SEV-ES Guest-Hypervisor Communication Block Standardization" [2].
>>>>>
>>>>> The main areas of the EDK2 code that are updated to support SEV-ES
>>>>> are around the exception handling support and the AP boot support.
>>>>>
>>>>> Exception support is required starting in Sec, continuing through
>>>>> Pei and into Dxe in order to handle #VC exceptions that are generated.
>>>>> Each AP requires it's own GHCB page as well as a page to hold
>>>>> values specific to that AP.
>>>>>
>>>>> AP booting poses some interesting challenges. The INIT-SIPI-SIPI
>>>>> sequence is typically used to boot the APs. However, the hypervisor
>>>>> is not allowed to update the guest registers. The GHCB document [2]
>>>>> talks about how SMP booting under SEV-ES is performed.
>>>>>
>>>>> Since the GHCB page must be a shared (unencrypted) page, the
>>>>> processor must be running in long mode in order for the guest and
>>>>> hypervisor to communicate with each other. As a result, SEV-ES is
>>>>> only supported under the X64 architecture.
>>>>>
>>>>> [1] https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.amd.com%2Fsystem%2Ffiles%2FTechDocs%2F24593.pdf&data=02%7C01%7Cthomas.lendacky%40amd.com%7C437e3b872cc046cf645208d7e088d6dc%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637224752713456520&sdata=Lau3rXHXtoEXdfQaq8BH3XpHzLQbBEcEUfgiQWSfwwU%3D&reserved=0
>>>>
>>>
>> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
>>> ww
>>>> .amd.com%2Fsystem%2Ffiles%2FTechDocs%2F24593.pdf&data=02%7C01%
>>> 7Cthomas
>>>> .lendacky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3dd8
>> 9
>>> 61fe4884
>>>>
>>>
>> e608e11a82d994e183d%7C0%7C0%7C637212125835211690&sdata=Q%2BIjeq
>>> %2FRDgi
>>>> ovKtPeA4TGDVorCK07jQVNZ7N9kvD%2BuE%3D&reserved=0>
>>>>> [2] https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdeveloper.amd.com%2Fwp-content%2Fresources%2F56421.pdf&data=02%7C01%7Cthomas.lendacky%40amd.com%7C437e3b872cc046cf645208d7e088d6dc%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637224752713456520&sdata=HtmOAIvANBFusy3WrliSbrPUiuMQmjFjURttM5IXuk4%3D&reserved=0
>>>>
>>>
>> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fde
>>> v
>>>> eloper.amd.com%2Fwp-
>>> content%2Fresources%2F56421.pdf&data=02%7C01%7Ctho
>>>>
>>>
>> mas.lendacky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3dd
>>> 8961fe4
>>>>
>>>
>> 884e608e11a82d994e183d%7C0%7C0%7C637212125835221679&sdata=bos02
>>> T0YR3i5
>>>> xji9rhjPl7jpS5uJPKt1Q0hhdy%2FoMR0%3D&reserved=0>
>>>>>
>>>>> ---
>>>>>
>>>>> These patches are based on commit:
>>>>> 2f524a745e23 ("BaseTools:Fix build tools print traceback info
>>>>> issue")
>>>>>
>>>>> Proper execution of SEV-ES relies on Bugzilla 2340 being fixed.
>>>>>
>>>>> A version of the tree (with an extra patch to workaround Bugzilla
>>>>> 2340) can be found at:
>>>>> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FAMDESE%2Fovmf%2Ftree%2Fsev-es-v13&data=02%7C01%7Cthomas.lendacky%40amd.com%7C437e3b872cc046cf645208d7e088d6dc%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637224752713456520&sdata=%2BxdUQmdZo1vnkRB4v8kVHUGToXxNICpWpUxd4BPZx%2Bs%3D&reserved=0
>>>>
>>>
>> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit
>>>> hub.com%2FAMDESE%2Fovmf%2Ftree%2Fsev-es-
>>> v13&data=02%7C01%7Cthomas.lend
>>>>
>>>
>> acky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3dd8961fe48
>>> 84e608e
>>>>
>>>
>> 11a82d994e183d%7C0%7C0%7C637212125835221679&sdata=fmIyS5QBB7YG
>>> DSqTFiBI
>>>> e%2BBdH1zatcEplUdNC2wi%2Fhc%3D&reserved=0>
>>>>>
>>>>> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org
>>>>> <mailto:ard.biesheuvel@linaro.org>>
>>>>> Cc: Benjamin You <benjamin.you@intel.com
>>>>> <mailto:benjamin.you@intel.com>>
>>>>> Cc: Dandan Bi <dandan.bi@intel.com <mailto:dandan.bi@intel.com>>
>>>>> Cc: Eric Dong <eric.dong@intel.com <mailto:eric.dong@intel.com>>
>>>>> Cc: Guo Dong <guo.dong@intel.com <mailto:guo.dong@intel.com>>
>>>>> Cc: Hao A Wu <hao.a.wu@intel.com <mailto:hao.a.wu@intel.com>>
>>>>> Cc: Jian J Wang <jian.j.wang@intel.com
>>>>> <mailto:jian.j.wang@intel.com>>
>>>>> Cc: Jordan Justen <jordan.l.justen@intel.com
>>>>> <mailto:jordan.l.justen@intel.com>>
>>>>> Cc: Laszlo Ersek <lersek@redhat.com <mailto:lersek@redhat.com>>
>>>>> Cc: Liming Gao <liming.gao@intel.com <mailto:liming.gao@intel.com>>
>>>>> Cc: Maurice Ma <maurice.ma@intel.com
>> <mailto:maurice.ma@intel.com>>
>>>>> Cc: Michael D Kinney <michael.d.kinney@intel.com
>>>>> <mailto:michael.d.kinney@intel.com>>
>>>>> Cc: Ray Ni <ray.ni@intel.com <mailto:ray.ni@intel.com>>
>>>>>
>>>>> Changes since v5:
>>>>> - Remove extraneous VmgExitLib usage
>>>>> - Miscellaneous changes to address feedback (coding style, etc.)
>>>>>
>>>>> Changes since v4:
>>>>> - Move the SEV-ES protocol negotiation out of the SEC exception
>> handler
>>>>> and into the SecMain.c file. As a result:
>>>>> - Move the SecGhcb related PCDs out of UefiCpuPkg and into
>> OvmfPkg
>>>>> - Combine SecAMDSevVcHandler.c and PeiDxeAMDSevVcHandler.c
>> into
>>> a
>>>>> single AMDSevVcHandler.c
>>>>> - Consolidate VmgExitLib usage into common LibraryClasses sections
>>>>> - Add documentation comments to the VmgExitLib functions
>>>>>
>>>>> Changes since v3:
>>>>> - Remove the need for the MP library finalization routine. The AP
>>>>> jump table address will be held by the hypervisor rather than
>>>>> communicated via the GHCB MSR. This removes some fragility around
>>>>> the UEFI to OS transition.
>>>>> - Rename the SEV-ES RIP reset area to SEV-ES workarea and use it to
>>>>> communicate the SEV-ES status, so that SEC CPU exception handling is
>>>>> only established for an SEV-ES guest.
>>>>> - Fix SMM build breakageAdd around QemuFlashPtrWrite().
>>>>> - Fix SMM build breakage by adding VC exception support the SMM CPU
>>>>> exception handling.
>>>>> - Add memory fencing around the invocation of AsmVmgExit().
>>>>> - Clarify comments around the SEV-ES AP reset RIP values and usage.
>>>>> - Move some PCD definitions from MdeModulePkg to UefiCpuPkg.
>>>>> - Remove the 16-bit code selector definition from MdeModulePkg
>>>>>
>>>>> Changes since v2:
>>>>> - Added a way to locate the SEV-ES fixed AP RIP address for starting
>>>>> AP's to avoid updating the actual flash image (build time location
>>>>> that is identified with a GUID value).
>>>>> - Create a VmgExit library to replace static inline functions.
>>>>> - Move some PCDs to the appropriate packages
>>>>> - Add support for writing to QEMU flash under SEV-ES
>>>>> - Add additional MMIO opcode support
>>>>> - Cleaned up the GHCB MSR CPUID protocol support
>>>>>
>>>>> Changes since v1:
>>>>> - Patches reworked to be more specific to the component/area being
>>> updated
>>>>> and order of definition/usage
>>>>> - Created a library for VMGEXIT-related functions to replace use of inline
>>>>> functions
>>>>> - Allocation method for GDT changed from AllocatePool to
>>>>> AllocatePages
>>>>> - Early caching only enabled for SEV-ES guests
>>>>> - Ensure AP loop mode set to halt loop mode for SEV-ES guests
>>>>> - Reserved SEC GHCB-related memory areas when S3 is enabled
>>>>>
>>>>> Tom Lendacky (42):
>>>>> MdePkg: Create PCDs to be used in support of SEV-ES
>>>>> MdePkg: Add the MSR definition for the GHCB register
>>>>> MdePkg: Add a structure definition for the GHCB
>>>>> MdeModulePkg/DxeIplPeim: Support GHCB pages when creating page
>>> tables
>>>>> MdePkg/BaseLib: Add support for the XGETBV instruction
>>>>> MdePkg/BaseLib: Add support for the VMGEXIT instruction
>>>>> UefiCpuPkg: Implement library support for VMGEXIT
>>>>> OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library
>>>>> UefiPayloadPkg: Prepare UefiPayloadPkg to use the VmgExitLib library
>>>>> UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC
>>> exception
>>>>> UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE
>>> events
>>>>> UefiCpuPkg/CpuExceptionHandler: Support string IO for IOIO_PROT
>> NAE
>>>>> events
>>>>> UefiCpuPkg/CpuExceptionHandler: Add support for CPUID NAE events
>>>>> UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT NAE
>>> events
>>>>> UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE events
>>> (MMIO)
>>>>> UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE
>>> events
>>>>> UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC NAE events
>>>>> UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC NAE
>> events
>>>>> UefiCpuPkg/CpuExceptionHandler: Add support for INVD NAE events
>>>>> UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL NAE
>>> events
>>>>> UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP NAE
>> events
>>>>> UefiCpuPkg/CpuExceptionHandler: Add support for
>>> MONITOR/MONITORX NAE
>>>>> events
>>>>> UefiCpuPkg/CpuExceptionHandler: Add support for MWAIT/MWAITX
>>> NAE
>>>>> events
>>>>> UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write
>>> NAE
>>>>> events
>>>>> OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator function
>>>>> OvmfPkg: Add support to perform SEV-ES initialization
>>>>> OvmfPkg: Create a GHCB page for use during Sec phase
>>>>> OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is supported
>>>>> OvmfPkg: Create GHCB pages for use during Pei and Dxe phase
>>>>> OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is
>> enabled
>>>>> UefiCpuPkg: Create an SEV-ES workarea PCD
>>>>> OvmfPkg: Reserve a page in memory for the SEV-ES usage
>>>>> OvmfPkg/ResetVector: Add support for a 32-bit SEV check
>>>>> OvmfPkg/Sec: Add #VC exception handling for Sec phase
>>>>> OvmfPkg/Sec: Enable cache early to speed up booting
>>>>> OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash detection
>>> with
>>>>> SEV-ES is enabled
>>>>> UefiCpuPkg: Add a 16-bit protected mode code segment descriptor
>>>>> UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is
>>>>> enabled
>>>>> UefiCpuPkg: Allow AP booting under SEV-ES
>>>>> OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector
>>>>> OvmfPkg: Move the GHCB allocations into reserved memory
>>>>> UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use
>>>>>
>>>>> MdeModulePkg/MdeModulePkg.dec | 9 +
>>>>> OvmfPkg/OvmfPkg.dec | 9 +
>>>>> UefiCpuPkg/UefiCpuPkg.dec | 17 +
>>>>> OvmfPkg/OvmfPkgIa32.dsc | 6 +
>>>>> OvmfPkg/OvmfPkgIa32X64.dsc | 6 +
>>>>> OvmfPkg/OvmfPkgX64.dsc | 6 +
>>>>> OvmfPkg/OvmfXen.dsc | 1 +
>>>>> UefiCpuPkg/UefiCpuPkg.dsc | 2 +
>>>>> UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 2 +
>>>>> UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc | 2 +
>>>>> OvmfPkg/OvmfPkgX64.fdf | 9 +
>>>>> MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf | 2 +
>>>>> MdePkg/Library/BaseLib/BaseLib.inf | 4 +
>>>>> OvmfPkg/PlatformPei/PlatformPei.inf | 7 +
>>>>> .../FvbServicesRuntimeDxe.inf | 2 +
>>>>> OvmfPkg/ResetVector/ResetVector.inf | 8 +
>>>>> OvmfPkg/Sec/SecMain.inf | 4 +
>>>>> .../DxeCpuExceptionHandlerLib.inf | 5 +
>>>>> .../PeiCpuExceptionHandlerLib.inf | 5 +
>>>>> .../SecPeiCpuExceptionHandlerLib.inf | 5 +
>>>>> .../SmmCpuExceptionHandlerLib.inf | 5 +
>>>>> UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf | 4 +
>>>>> UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 4 +
>>>>> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf | 33 +
>>>>> .../Core/DxeIplPeim/X64/VirtualMemory.h | 12 +-
>>>>> MdePkg/Include/Library/BaseLib.h | 31 +
>>>>> MdePkg/Include/Register/Amd/Fam17Msr.h | 42 +
>>>>> MdePkg/Include/Register/Amd/Ghcb.h | 136 ++
>>>>> OvmfPkg/Include/Library/MemEncryptSevLib.h | 12 +
>>>>> .../QemuFlash.h | 6 +
>>>>> UefiCpuPkg/CpuDxe/CpuGdt.h | 4 +-
>>>>> UefiCpuPkg/Include/Library/VmgExitLib.h | 111 ++
>>>>> .../CpuExceptionHandlerLib/AMDSevVcCommon.h | 26 +
>>>>> .../CpuExceptionCommon.h | 2 +
>>>>> UefiCpuPkg/Library/MpInitLib/MpLib.h | 68 +-
>>>>> .../Core/DxeIplPeim/Ia32/DxeLoadFunc.c | 4 +-
>>>>> .../Core/DxeIplPeim/X64/DxeLoadFunc.c | 11 +-
>>>>> .../Core/DxeIplPeim/X64/VirtualMemory.c | 49 +-
>>>>> MdePkg/Library/BaseLib/Ia32/GccInline.c | 45 +
>>>>> MdePkg/Library/BaseLib/X64/GccInline.c | 47 +
>>>>> .../MemEncryptSevLibInternal.c | 75 +-
>>>>> OvmfPkg/PlatformPei/AmdSev.c | 82 ++
>>>>> OvmfPkg/PlatformPei/MemDetect.c | 23 +
>>>>> .../QemuFlash.c | 23 +-
>>>>> .../QemuFlashDxe.c | 15 +
>>>>> .../QemuFlashSmm.c | 9 +
>>>>> OvmfPkg/Sec/SecMain.c | 160 ++-
>>>>> UefiCpuPkg/CpuDxe/CpuGdt.c | 8 +-
>>>>> .../CpuExceptionHandlerLib/AMDSevVcHandler.c | 29 +
>>>>> .../CpuExceptionCommon.c | 2 +-
>>>>> .../Ia32/ArchAMDSevVcHandler.c | 24 +
>>>>> .../PeiDxeSmmCpuException.c | 16 +
>>>>> .../SecPeiCpuException.c | 16 +
>>>>> .../X64/ArchAMDSevVcHandler.c | 1237 +++++++++++++++++
>>>>> UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 114 +-
>>>>> UefiCpuPkg/Library/MpInitLib/MpLib.c | 257 +++-
>>>>> UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 19 +
>>>>> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c | 249 ++++
>>>>> UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c | 2 +-
>>>>> MdePkg/Library/BaseLib/Ia32/VmgExit.nasm | 37 +
>>>>> MdePkg/Library/BaseLib/Ia32/XGetBv.nasm | 31 +
>>>>> MdePkg/Library/BaseLib/X64/VmgExit.nasm | 32 +
>>>>> MdePkg/Library/BaseLib/X64/XGetBv.nasm | 34 +
>>>>> OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 100 ++
>>>>> OvmfPkg/ResetVector/Ia32/PageTables64.asm | 351 ++++-
>>>>> OvmfPkg/ResetVector/ResetVector.nasmb | 20 +
>>>>> .../X64/ExceptionHandlerAsm.nasm | 17 +
>>>>> UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc | 2 +-
>>>>> .../Library/MpInitLib/Ia32/MpFuncs.nasm | 15 +
>>>>> UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc | 4 +-
>>>>> UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 370 ++++-
>>>>> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni | 15 +
>>>>> .../ResetVector/Vtf0/Ia16/Real16ToFlat32.asm | 9 +
>>>>> 73 files changed, 4061 insertions(+), 99 deletions(-)
>>>>> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
>>>>> create mode 100644 MdePkg/Include/Register/Amd/Ghcb.h
>>>>> create mode 100644 UefiCpuPkg/Include/Library/VmgExitLib.h
>>>>> create mode 100644
>>> UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcCommon.h
>>>>> create mode 100644
>>> UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcHandler.c
>>>>> create mode 100644
>>>
>> UefiCpuPkg/Library/CpuExceptionHandlerLib/Ia32/ArchAMDSevVcHandler.c
>>>>> create mode 100644
>>>
>> UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
>>>>> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c
>>>>> create mode 100644 MdePkg/Library/BaseLib/Ia32/VmgExit.nasm
>>>>> create mode 100644 MdePkg/Library/BaseLib/Ia32/XGetBv.nasm
>>>>> create mode 100644 MdePkg/Library/BaseLib/X64/VmgExit.nasm
>>>>> create mode 100644 MdePkg/Library/BaseLib/X64/XGetBv.nasm
>>>>> create mode 100644 OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
>>>>> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni
>>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
>
^ permalink raw reply [flat|nested] 50+ messages in thread
* Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
2020-04-16 13:46 ` Lendacky, Thomas
@ 2020-04-17 9:10 ` Dong, Eric
0 siblings, 0 replies; 50+ messages in thread
From: Dong, Eric @ 2020-04-17 9:10 UTC (permalink / raw)
To: devel@edk2.groups.io, thomas.lendacky@amd.com
Cc: Justen, Jordan L, Laszlo Ersek, Ard Biesheuvel, Kinney, Michael D,
Gao, Liming, Ni, Ray, Brijesh Singh, You, Benjamin, Bi, Dandan,
Dong, Guo, Wu, Hao A, Wang, Jian J, Ma, Maurice
> -----Original Message-----
> From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf Of
> Lendacky, Thomas
> Sent: Thursday, April 16, 2020 9:47 PM
> To: devel@edk2.groups.io; Dong, Eric <eric.dong@intel.com>
> Cc: Justen, Jordan L <jordan.l.justen@intel.com>; Laszlo Ersek
> <lersek@redhat.com>; Ard Biesheuvel <ard.biesheuvel@linaro.org>; Kinney,
> Michael D <michael.d.kinney@intel.com>; Gao, Liming
> <liming.gao@intel.com>; Ni, Ray <ray.ni@intel.com>; Brijesh Singh
> <brijesh.singh@amd.com>; You, Benjamin <benjamin.you@intel.com>; Bi,
> Dandan <dandan.bi@intel.com>; Dong, Guo <guo.dong@intel.com>; Wu,
> Hao A <hao.a.wu@intel.com>; Wang, Jian J <jian.j.wang@intel.com>; Ma,
> Maurice <maurice.ma@intel.com>
> Subject: Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
>
> On 4/14/20 10:30 AM, Dong, Eric via groups.io wrote:
> >>> -----Original Message-----
> >>> From: devel@edk2.groups.io [mailto:devel@edk2.groups.io] On Behalf
> Of
> >>> Lendacky, Thomas
> >>> Sent: Thursday, April 2, 2020 4:42 AM
> >>> To: Dong, Eric <eric.dong@intel.com>; devel@edk2.groups.io
> >>> Cc: Justen, Jordan L <jordan.l.justen@intel.com>; Laszlo Ersek
> >>> <lersek@redhat.com>; Ard Biesheuvel <ard.biesheuvel@linaro.org>;
> >>> Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> >>> <liming.gao@intel.com>; Ni, Ray <ray.ni@intel.com>; Brijesh Singh
> >>> <brijesh.singh@amd.com>; You, Benjamin <benjamin.you@intel.com>;
> Bi,
> >>> Dandan <dandan.bi@intel.com>; Dong, Guo <guo.dong@intel.com>;
> Wu,
> >> Hao
> >>> A <hao.a.wu@intel.com>; Wang, Jian J <jian.j.wang@intel.com>; Ma,
> >>> Maurice <maurice.ma@intel.com>
> >>> Subject: Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
> >>>
> >>> On 3/30/20 7:47 PM, Dong, Eric wrote:
> >>>> Hi Tom,
> >>>>
> >>>> Sorry for late response. It’s a huge patch, please give me two more
> >>>> weeks to detail review them.
> >>>>
> >>>> I have rough go through these patches and have some basic comments
> >>>> for them now:
> >>>>
> >>>> 1.It’s better to spit patch if changes files not in same package.
> >>>> Like patch 1/42.
> >>>
> >>> Ok, will do.
> >>>
> >>>>
> >>>> 2.All functions need to have comments for them. Miss comments in
> >>>> patch
> >>>> 10/42 and others.
> >>>
> >>> Just external functions or both external and internal (STATIC) functions,
> too?
> >>
> >> All the functions.
> >
> > you can use ECC tool to help you find all the coding style related issues.
> > You can reference link
> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith
> ub.com%2Ftianocore%2Ftianocore.github.io%2Fwiki%2FECC-
> tool&data=02%7C01%7Cthomas.lendacky%40amd.com%7C437e3b872cc
> 046cf645208d7e088d6dc%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0
> %7C637224752713456520&sdata=rjRgLrtyDu2dXoRddbaTWkPtENLLZK93
> MEsmxR36Fkc%3D&reserved=0 to know how to run this tool.
>
> Thanks for the pointer. I have addressed all issues identified by ECC with
> respect to the code that I have added with these patches.
>
> Are you waiting for another version with these changes before reviewing
> further? If so, I'll submit that now, otherwise I'll wait for your review
> of the current version.
>
I have detail go through all your changes, I think it's good and should have no
impact for existing code if we don't enable this feature.
If you already fixed all the ECC issues, please send your new patches.
I will base on latest code to give my review-by tag.
Thanks,
Eric
> Thanks,
> Tom
>
> >
> > Thanks,
> > Eric
> >>
> >> Thanks,
> >> Eric
> >>
> >>>
> >>> Thanks,
> >>> Tom
> >>>
> >>>>
> >>>> Please update patches to fix above basic checks first.
> >>>>
> >>>> Thanks,
> >>>>
> >>>> Eric
> >>>>
> >>>> *From:*devel@edk2.groups.io [mailto:devel@edk2.groups.io] *On
> >> Behalf
> >>>> Of *Lendacky, Thomas
> >>>> *Sent:* Tuesday, March 31, 2020 12:54 AM
> >>>> *To:* devel@edk2.groups.io
> >>>> *Cc:* Justen, Jordan L <jordan.l.justen@intel.com>; Laszlo Ersek
> >>>> <lersek@redhat.com>; Ard Biesheuvel <ard.biesheuvel@linaro.org>;
> >>>> Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming
> >>>> <liming.gao@intel.com>; Dong, Eric <eric.dong@intel.com>; Ni, Ray
> >>>> <ray.ni@intel.com>; Brijesh Singh <brijesh.singh@amd.com>; You,
> >>>> Benjamin <benjamin.you@intel.com>; Bi, Dandan
> >> <dandan.bi@intel.com>;
> >>>> Dong, Guo <guo.dong@intel.com>; Wu, Hao A <hao.a.wu@intel.com>;
> >>> Wang,
> >>>> Jian J <jian.j.wang@intel.com>; Ma, Maurice <maurice.ma@intel.com>
> >>>> *Subject:* Re: [edk2-devel] [PATCH v6 00/42] SEV-ES guest support
> >>>>
> >>>> I've gotten some nice feedback from Laszlo, especially on the
> >>>> OvmfPkg side of this patchset, but haven't seen much response from
> >>>> the other maintainers. Is there any feedback on the MdePkg,
> >>>> MdeModulePkg and UefiCpuPkg changes that needs to be addressed
> in
> >> order to merge this?
> >>>>
> >>>> I do have some minor changes on ensuring the per-CPU variable page
> >>>> stays encrypted, but not much beyond that. Those changes can be
> >>>> submitted afterwards or as a new version before inclusion.
> >>>>
> >>>> Thanks,
> >>>> Tom
> >>>>
> >>>> On 3/24/20 12:40 PM, Tom Lendacky wrote:
> >>>>> This patch series provides support for running EDK2/OVMF under
> SEV-
> >> ES.
> >>>>>
> >>>>> Secure Encrypted Virtualization - Encrypted State (SEV-ES) expands
> >>>>> on the SEV support to protect the guest register state from the
> >>>>> hypervisor. See
> >>>>> "AMD64 Architecture Programmer's Manual Volume 2: System
> >>>>> Programming", section "15.35 Encrypted State (SEV-ES)" [1].
> >>>>>
> >>>>> In order to allow a hypervisor to perform functions on behalf of a
> >>>>> guest, there is architectural support for notifying a guest's
> >>>>> operating system when certain types of VMEXITs are about to occur.
> >>>>> This allows the guest to selectively share information with the
> >>>>> hypervisor to satisfy the requested function. The notification is
> >>>>> performed using a new exception, the VMM Communication
> exception
> >>>>> (#VC). The information is shared through the Guest-Hypervisor
> >>> Communication Block (GHCB) using the VMGEXIT instruction.
> >>>>> The GHCB format and the protocol for using it is documented in
> >>>>> "SEV-ES Guest-Hypervisor Communication Block Standardization" [2].
> >>>>>
> >>>>> The main areas of the EDK2 code that are updated to support SEV-ES
> >>>>> are around the exception handling support and the AP boot support.
> >>>>>
> >>>>> Exception support is required starting in Sec, continuing through
> >>>>> Pei and into Dxe in order to handle #VC exceptions that are generated.
> >>>>> Each AP requires it's own GHCB page as well as a page to hold
> >>>>> values specific to that AP.
> >>>>>
> >>>>> AP booting poses some interesting challenges. The INIT-SIPI-SIPI
> >>>>> sequence is typically used to boot the APs. However, the hypervisor
> >>>>> is not allowed to update the guest registers. The GHCB document [2]
> >>>>> talks about how SMP booting under SEV-ES is performed.
> >>>>>
> >>>>> Since the GHCB page must be a shared (unencrypted) page, the
> >>>>> processor must be running in long mode in order for the guest and
> >>>>> hypervisor to communicate with each other. As a result, SEV-ES is
> >>>>> only supported under the X64 architecture.
> >>>>>
> >>>>> [1]
> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fww
> w.amd.com%2Fsystem%2Ffiles%2FTechDocs%2F24593.pdf&data=02%7
> C01%7Cthomas.lendacky%40amd.com%7C437e3b872cc046cf645208d7e088d6
> dc%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637224752713456
> 520&sdata=Lau3rXHXtoEXdfQaq8BH3XpHzLQbBEcEUfgiQWSfwwU%3D&
> amp;reserved=0
> >>>>
> >>>
> >>
> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw
> >>> ww
> >>>> .amd.com%2Fsystem%2Ffiles%2FTechDocs%2F24593.pdf&data=02%7C
> 01%
> >>> 7Cthomas
> >>>> .lendacky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3d
> d8
> >> 9
> >>> 61fe4884
> >>>>
> >>>
> >>
> e608e11a82d994e183d%7C0%7C0%7C637212125835211690&sdata=Q%2BIjeq
> >>> %2FRDgi
> >>>> ovKtPeA4TGDVorCK07jQVNZ7N9kvD%2BuE%3D&reserved=0>
> >>>>> [2]
> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdev
> eloper.amd.com%2Fwp-
> content%2Fresources%2F56421.pdf&data=02%7C01%7Cthomas.lendac
> ky%40amd.com%7C437e3b872cc046cf645208d7e088d6dc%7C3dd8961fe4884
> e608e11a82d994e183d%7C0%7C0%7C637224752713456520&sdata=Htm
> OAIvANBFusy3WrliSbrPUiuMQmjFjURttM5IXuk4%3D&reserved=0
> >>>>
> >>>
> >>
> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fde
> >>> v
> >>>> eloper.amd.com%2Fwp-
> >>> content%2Fresources%2F56421.pdf&data=02%7C01%7Ctho
> >>>>
> >>>
> >>
> mas.lendacky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3dd
> >>> 8961fe4
> >>>>
> >>>
> >>
> 884e608e11a82d994e183d%7C0%7C0%7C637212125835221679&sdata=bos02
> >>> T0YR3i5
> >>>> xji9rhjPl7jpS5uJPKt1Q0hhdy%2FoMR0%3D&reserved=0>
> >>>>>
> >>>>> ---
> >>>>>
> >>>>> These patches are based on commit:
> >>>>> 2f524a745e23 ("BaseTools:Fix build tools print traceback info
> >>>>> issue")
> >>>>>
> >>>>> Proper execution of SEV-ES relies on Bugzilla 2340 being fixed.
> >>>>>
> >>>>> A version of the tree (with an extra patch to workaround Bugzilla
> >>>>> 2340) can be found at:
> >>>>>
> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgith
> ub.com%2FAMDESE%2Fovmf%2Ftree%2Fsev-es-
> v13&data=02%7C01%7Cthomas.lendacky%40amd.com%7C437e3b872cc
> 046cf645208d7e088d6dc%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0
> %7C637224752713456520&sdata=%2BxdUQmdZo1vnkRB4v8kVHUGToX
> xNICpWpUxd4BPZx%2Bs%3D&reserved=0
> >>>>
> >>>
> >>
> <https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit
> >>>> hub.com%2FAMDESE%2Fovmf%2Ftree%2Fsev-es-
> >>> v13&data=02%7C01%7Cthomas.lend
> >>>>
> >>>
> >>
> acky%40amd.com%7C2ee33c1d932a4906558f08d7d50d1ca2%7C3dd8961fe48
> >>> 84e608e
> >>>>
> >>>
> >>
> 11a82d994e183d%7C0%7C0%7C637212125835221679&sdata=fmIyS5QBB7YG
> >>> DSqTFiBI
> >>>> e%2BBdH1zatcEplUdNC2wi%2Fhc%3D&reserved=0>
> >>>>>
> >>>>> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org
> >>>>> <mailto:ard.biesheuvel@linaro.org>>
> >>>>> Cc: Benjamin You <benjamin.you@intel.com
> >>>>> <mailto:benjamin.you@intel.com>>
> >>>>> Cc: Dandan Bi <dandan.bi@intel.com <mailto:dandan.bi@intel.com>>
> >>>>> Cc: Eric Dong <eric.dong@intel.com <mailto:eric.dong@intel.com>>
> >>>>> Cc: Guo Dong <guo.dong@intel.com <mailto:guo.dong@intel.com>>
> >>>>> Cc: Hao A Wu <hao.a.wu@intel.com <mailto:hao.a.wu@intel.com>>
> >>>>> Cc: Jian J Wang <jian.j.wang@intel.com
> >>>>> <mailto:jian.j.wang@intel.com>>
> >>>>> Cc: Jordan Justen <jordan.l.justen@intel.com
> >>>>> <mailto:jordan.l.justen@intel.com>>
> >>>>> Cc: Laszlo Ersek <lersek@redhat.com <mailto:lersek@redhat.com>>
> >>>>> Cc: Liming Gao <liming.gao@intel.com <mailto:liming.gao@intel.com>>
> >>>>> Cc: Maurice Ma <maurice.ma@intel.com
> >> <mailto:maurice.ma@intel.com>>
> >>>>> Cc: Michael D Kinney <michael.d.kinney@intel.com
> >>>>> <mailto:michael.d.kinney@intel.com>>
> >>>>> Cc: Ray Ni <ray.ni@intel.com <mailto:ray.ni@intel.com>>
> >>>>>
> >>>>> Changes since v5:
> >>>>> - Remove extraneous VmgExitLib usage
> >>>>> - Miscellaneous changes to address feedback (coding style, etc.)
> >>>>>
> >>>>> Changes since v4:
> >>>>> - Move the SEV-ES protocol negotiation out of the SEC exception
> >> handler
> >>>>> and into the SecMain.c file. As a result:
> >>>>> - Move the SecGhcb related PCDs out of UefiCpuPkg and into
> >> OvmfPkg
> >>>>> - Combine SecAMDSevVcHandler.c and PeiDxeAMDSevVcHandler.c
> >> into
> >>> a
> >>>>> single AMDSevVcHandler.c
> >>>>> - Consolidate VmgExitLib usage into common LibraryClasses sections
> >>>>> - Add documentation comments to the VmgExitLib functions
> >>>>>
> >>>>> Changes since v3:
> >>>>> - Remove the need for the MP library finalization routine. The AP
> >>>>> jump table address will be held by the hypervisor rather than
> >>>>> communicated via the GHCB MSR. This removes some fragility
> around
> >>>>> the UEFI to OS transition.
> >>>>> - Rename the SEV-ES RIP reset area to SEV-ES workarea and use it to
> >>>>> communicate the SEV-ES status, so that SEC CPU exception handling
> is
> >>>>> only established for an SEV-ES guest.
> >>>>> - Fix SMM build breakageAdd around QemuFlashPtrWrite().
> >>>>> - Fix SMM build breakage by adding VC exception support the SMM
> CPU
> >>>>> exception handling.
> >>>>> - Add memory fencing around the invocation of AsmVmgExit().
> >>>>> - Clarify comments around the SEV-ES AP reset RIP values and usage.
> >>>>> - Move some PCD definitions from MdeModulePkg to UefiCpuPkg.
> >>>>> - Remove the 16-bit code selector definition from MdeModulePkg
> >>>>>
> >>>>> Changes since v2:
> >>>>> - Added a way to locate the SEV-ES fixed AP RIP address for starting
> >>>>> AP's to avoid updating the actual flash image (build time location
> >>>>> that is identified with a GUID value).
> >>>>> - Create a VmgExit library to replace static inline functions.
> >>>>> - Move some PCDs to the appropriate packages
> >>>>> - Add support for writing to QEMU flash under SEV-ES
> >>>>> - Add additional MMIO opcode support
> >>>>> - Cleaned up the GHCB MSR CPUID protocol support
> >>>>>
> >>>>> Changes since v1:
> >>>>> - Patches reworked to be more specific to the component/area being
> >>> updated
> >>>>> and order of definition/usage
> >>>>> - Created a library for VMGEXIT-related functions to replace use of
> inline
> >>>>> functions
> >>>>> - Allocation method for GDT changed from AllocatePool to
> >>>>> AllocatePages
> >>>>> - Early caching only enabled for SEV-ES guests
> >>>>> - Ensure AP loop mode set to halt loop mode for SEV-ES guests
> >>>>> - Reserved SEC GHCB-related memory areas when S3 is enabled
> >>>>>
> >>>>> Tom Lendacky (42):
> >>>>> MdePkg: Create PCDs to be used in support of SEV-ES
> >>>>> MdePkg: Add the MSR definition for the GHCB register
> >>>>> MdePkg: Add a structure definition for the GHCB
> >>>>> MdeModulePkg/DxeIplPeim: Support GHCB pages when creating
> page
> >>> tables
> >>>>> MdePkg/BaseLib: Add support for the XGETBV instruction
> >>>>> MdePkg/BaseLib: Add support for the VMGEXIT instruction
> >>>>> UefiCpuPkg: Implement library support for VMGEXIT
> >>>>> OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library
> >>>>> UefiPayloadPkg: Prepare UefiPayloadPkg to use the VmgExitLib
> library
> >>>>> UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC
> >>> exception
> >>>>> UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE
> >>> events
> >>>>> UefiCpuPkg/CpuExceptionHandler: Support string IO for IOIO_PROT
> >> NAE
> >>>>> events
> >>>>> UefiCpuPkg/CpuExceptionHandler: Add support for CPUID NAE
> events
> >>>>> UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT NAE
> >>> events
> >>>>> UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE
> events
> >>> (MMIO)
> >>>>> UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE
> >>> events
> >>>>> UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC NAE
> events
> >>>>> UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC NAE
> >> events
> >>>>> UefiCpuPkg/CpuExceptionHandler: Add support for INVD NAE
> events
> >>>>> UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL NAE
> >>> events
> >>>>> UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP NAE
> >> events
> >>>>> UefiCpuPkg/CpuExceptionHandler: Add support for
> >>> MONITOR/MONITORX NAE
> >>>>> events
> >>>>> UefiCpuPkg/CpuExceptionHandler: Add support for
> MWAIT/MWAITX
> >>> NAE
> >>>>> events
> >>>>> UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write
> >>> NAE
> >>>>> events
> >>>>> OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator
> function
> >>>>> OvmfPkg: Add support to perform SEV-ES initialization
> >>>>> OvmfPkg: Create a GHCB page for use during Sec phase
> >>>>> OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is
> supported
> >>>>> OvmfPkg: Create GHCB pages for use during Pei and Dxe phase
> >>>>> OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is
> >> enabled
> >>>>> UefiCpuPkg: Create an SEV-ES workarea PCD
> >>>>> OvmfPkg: Reserve a page in memory for the SEV-ES usage
> >>>>> OvmfPkg/ResetVector: Add support for a 32-bit SEV check
> >>>>> OvmfPkg/Sec: Add #VC exception handling for Sec phase
> >>>>> OvmfPkg/Sec: Enable cache early to speed up booting
> >>>>> OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash
> detection
> >>> with
> >>>>> SEV-ES is enabled
> >>>>> UefiCpuPkg: Add a 16-bit protected mode code segment descriptor
> >>>>> UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is
> >>>>> enabled
> >>>>> UefiCpuPkg: Allow AP booting under SEV-ES
> >>>>> OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector
> >>>>> OvmfPkg: Move the GHCB allocations into reserved memory
> >>>>> UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use
> >>>>>
> >>>>> MdeModulePkg/MdeModulePkg.dec | 9 +
> >>>>> OvmfPkg/OvmfPkg.dec | 9 +
> >>>>> UefiCpuPkg/UefiCpuPkg.dec | 17 +
> >>>>> OvmfPkg/OvmfPkgIa32.dsc | 6 +
> >>>>> OvmfPkg/OvmfPkgIa32X64.dsc | 6 +
> >>>>> OvmfPkg/OvmfPkgX64.dsc | 6 +
> >>>>> OvmfPkg/OvmfXen.dsc | 1 +
> >>>>> UefiCpuPkg/UefiCpuPkg.dsc | 2 +
> >>>>> UefiPayloadPkg/UefiPayloadPkgIa32.dsc | 2 +
> >>>>> UefiPayloadPkg/UefiPayloadPkgIa32X64.dsc | 2 +
> >>>>> OvmfPkg/OvmfPkgX64.fdf | 9 +
> >>>>> MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf | 2 +
> >>>>> MdePkg/Library/BaseLib/BaseLib.inf | 4 +
> >>>>> OvmfPkg/PlatformPei/PlatformPei.inf | 7 +
> >>>>> .../FvbServicesRuntimeDxe.inf | 2 +
> >>>>> OvmfPkg/ResetVector/ResetVector.inf | 8 +
> >>>>> OvmfPkg/Sec/SecMain.inf | 4 +
> >>>>> .../DxeCpuExceptionHandlerLib.inf | 5 +
> >>>>> .../PeiCpuExceptionHandlerLib.inf | 5 +
> >>>>> .../SecPeiCpuExceptionHandlerLib.inf | 5 +
> >>>>> .../SmmCpuExceptionHandlerLib.inf | 5 +
> >>>>> UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf | 4 +
> >>>>> UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 4 +
> >>>>> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf | 33 +
> >>>>> .../Core/DxeIplPeim/X64/VirtualMemory.h | 12 +-
> >>>>> MdePkg/Include/Library/BaseLib.h | 31 +
> >>>>> MdePkg/Include/Register/Amd/Fam17Msr.h | 42 +
> >>>>> MdePkg/Include/Register/Amd/Ghcb.h | 136 ++
> >>>>> OvmfPkg/Include/Library/MemEncryptSevLib.h | 12 +
> >>>>> .../QemuFlash.h | 6 +
> >>>>> UefiCpuPkg/CpuDxe/CpuGdt.h | 4 +-
> >>>>> UefiCpuPkg/Include/Library/VmgExitLib.h | 111 ++
> >>>>> .../CpuExceptionHandlerLib/AMDSevVcCommon.h | 26 +
> >>>>> .../CpuExceptionCommon.h | 2 +
> >>>>> UefiCpuPkg/Library/MpInitLib/MpLib.h | 68 +-
> >>>>> .../Core/DxeIplPeim/Ia32/DxeLoadFunc.c | 4 +-
> >>>>> .../Core/DxeIplPeim/X64/DxeLoadFunc.c | 11 +-
> >>>>> .../Core/DxeIplPeim/X64/VirtualMemory.c | 49 +-
> >>>>> MdePkg/Library/BaseLib/Ia32/GccInline.c | 45 +
> >>>>> MdePkg/Library/BaseLib/X64/GccInline.c | 47 +
> >>>>> .../MemEncryptSevLibInternal.c | 75 +-
> >>>>> OvmfPkg/PlatformPei/AmdSev.c | 82 ++
> >>>>> OvmfPkg/PlatformPei/MemDetect.c | 23 +
> >>>>> .../QemuFlash.c | 23 +-
> >>>>> .../QemuFlashDxe.c | 15 +
> >>>>> .../QemuFlashSmm.c | 9 +
> >>>>> OvmfPkg/Sec/SecMain.c | 160 ++-
> >>>>> UefiCpuPkg/CpuDxe/CpuGdt.c | 8 +-
> >>>>> .../CpuExceptionHandlerLib/AMDSevVcHandler.c | 29 +
> >>>>> .../CpuExceptionCommon.c | 2 +-
> >>>>> .../Ia32/ArchAMDSevVcHandler.c | 24 +
> >>>>> .../PeiDxeSmmCpuException.c | 16 +
> >>>>> .../SecPeiCpuException.c | 16 +
> >>>>> .../X64/ArchAMDSevVcHandler.c | 1237
> +++++++++++++++++
> >>>>> UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 114 +-
> >>>>> UefiCpuPkg/Library/MpInitLib/MpLib.c | 257 +++-
> >>>>> UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 19 +
> >>>>> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c | 249 ++++
> >>>>> UefiCpuPkg/PiSmmCpuDxeSmm/X64/SmmFuncsArch.c | 2 +-
> >>>>> MdePkg/Library/BaseLib/Ia32/VmgExit.nasm | 37 +
> >>>>> MdePkg/Library/BaseLib/Ia32/XGetBv.nasm | 31 +
> >>>>> MdePkg/Library/BaseLib/X64/VmgExit.nasm | 32 +
> >>>>> MdePkg/Library/BaseLib/X64/XGetBv.nasm | 34 +
> >>>>> OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm | 100 ++
> >>>>> OvmfPkg/ResetVector/Ia32/PageTables64.asm | 351 ++++-
> >>>>> OvmfPkg/ResetVector/ResetVector.nasmb | 20 +
> >>>>> .../X64/ExceptionHandlerAsm.nasm | 17 +
> >>>>> UefiCpuPkg/Library/MpInitLib/Ia32/MpEqu.inc | 2 +-
> >>>>> .../Library/MpInitLib/Ia32/MpFuncs.nasm | 15 +
> >>>>> UefiCpuPkg/Library/MpInitLib/X64/MpEqu.inc | 4 +-
> >>>>> UefiCpuPkg/Library/MpInitLib/X64/MpFuncs.nasm | 370 ++++-
> >>>>> UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni | 15 +
> >>>>> .../ResetVector/Vtf0/Ia16/Real16ToFlat32.asm | 9 +
> >>>>> 73 files changed, 4061 insertions(+), 99 deletions(-)
> >>>>> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.inf
> >>>>> create mode 100644 MdePkg/Include/Register/Amd/Ghcb.h
> >>>>> create mode 100644 UefiCpuPkg/Include/Library/VmgExitLib.h
> >>>>> create mode 100644
> >>> UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcCommon.h
> >>>>> create mode 100644
> >>> UefiCpuPkg/Library/CpuExceptionHandlerLib/AMDSevVcHandler.c
> >>>>> create mode 100644
> >>>
> >>
> UefiCpuPkg/Library/CpuExceptionHandlerLib/Ia32/ArchAMDSevVcHandler.c
> >>>>> create mode 100644
> >>>
> >>
> UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/ArchAMDSevVcHandler.c
> >>>>> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.c
> >>>>> create mode 100644 MdePkg/Library/BaseLib/Ia32/VmgExit.nasm
> >>>>> create mode 100644 MdePkg/Library/BaseLib/Ia32/XGetBv.nasm
> >>>>> create mode 100644 MdePkg/Library/BaseLib/X64/VmgExit.nasm
> >>>>> create mode 100644 MdePkg/Library/BaseLib/X64/XGetBv.nasm
> >>>>> create mode 100644
> OvmfPkg/ResetVector/Ia16/ResetVectorVtf0.asm
> >>>>> create mode 100644 UefiCpuPkg/Library/VmgExitLib/VmgExitLib.uni
> >>>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>
> >>
> >
> >
> >
>
>
^ permalink raw reply [flat|nested] 50+ messages in thread
end of thread, other threads:[~2020-04-17 9:10 UTC | newest]
Thread overview: 50+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-03-24 17:40 [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 01/42] MdePkg: Create PCDs to be used in support of SEV-ES Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 02/42] MdePkg: Add the MSR definition for the GHCB register Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 03/42] MdePkg: Add a structure definition for the GHCB Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 04/42] MdeModulePkg/DxeIplPeim: Support GHCB pages when creating page tables Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 05/42] MdePkg/BaseLib: Add support for the XGETBV instruction Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 06/42] MdePkg/BaseLib: Add support for the VMGEXIT instruction Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 07/42] UefiCpuPkg: Implement library support for VMGEXIT Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 08/42] OvmfPkg: Prepare OvmfPkg to use the VmgExitLib library Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 09/42] UefiPayloadPkg: Prepare UefiPayloadPkg " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 10/42] UefiCpuPkg/CpuExceptionHandler: Add base support for the #VC exception Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 11/42] UefiCpuPkg/CpuExceptionHandler: Add support for IOIO_PROT NAE events Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 12/42] UefiCpuPkg/CpuExceptionHandler: Support string IO " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 13/42] UefiCpuPkg/CpuExceptionHandler: Add support for CPUID " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 14/42] UefiCpuPkg/CpuExceptionHandler: Add support for MSR_PROT " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 15/42] UefiCpuPkg/CpuExceptionHandler: Add support for NPF NAE events (MMIO) Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 16/42] UefiCpuPkg/CpuExceptionHandler: Add support for WBINVD NAE events Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 17/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDTSC " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 18/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDPMC " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 19/42] UefiCpuPkg/CpuExceptionHandler: Add support for INVD " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 20/42] UefiCpuPkg/CpuExceptionHandler: Add support for VMMCALL " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 21/42] UefiCpuPkg/CpuExceptionHandler: Add support for RDTSCP " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 22/42] UefiCpuPkg/CpuExceptionHandler: Add support for MONITOR/MONITORX " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 23/42] UefiCpuPkg/CpuExceptionHandler: Add support for MWAIT/MWAITX " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 24/42] UefiCpuPkg/CpuExceptionHandler: Add support for DR7 Read/Write " Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 25/42] OvmfPkg/MemEncryptSevLib: Add an SEV-ES guest indicator function Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 26/42] OvmfPkg: Add support to perform SEV-ES initialization Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 27/42] OvmfPkg: Create a GHCB page for use during Sec phase Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 28/42] OvmfPkg/PlatformPei: Reserve GHCB-related areas if S3 is supported Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 29/42] OvmfPkg: Create GHCB pages for use during Pei and Dxe phase Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 30/42] OvmfPkg/PlatformPei: Move early GDT into ram when SEV-ES is enabled Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 31/42] UefiCpuPkg: Create an SEV-ES workarea PCD Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 32/42] OvmfPkg: Reserve a page in memory for the SEV-ES usage Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 33/42] OvmfPkg/ResetVector: Add support for a 32-bit SEV check Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 34/42] OvmfPkg/Sec: Add #VC exception handling for Sec phase Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 36/42] OvmfPkg/QemuFlashFvbServicesRuntimeDxe: Bypass flash detection with SEV-ES is enabled Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 37/42] UefiCpuPkg: Add a 16-bit protected mode code segment descriptor Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 38/42] UefiCpuPkg/MpInitLib: Add CPU MP data flag to indicate if SEV-ES is enabled Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 39/42] UefiCpuPkg: Allow AP booting under SEV-ES Lendacky, Thomas
2020-03-24 17:40 ` [PATCH v6 40/42] OvmfPkg: Use the SEV-ES work area for the SEV-ES AP reset vector Lendacky, Thomas
2020-03-24 19:44 ` [PATCH v6 35/42] OvmfPkg/Sec: Enable cache early to speed up booting Lendacky, Thomas
2020-03-24 19:44 ` [PATCH v6 41/42] OvmfPkg: Move the GHCB allocations into reserved memory Lendacky, Thomas
2020-03-24 19:44 ` [PATCH v6 42/42] UefiCpuPkg/MpInitLib: Prepare SEV-ES guest APs for OS use Lendacky, Thomas
2020-03-30 16:53 ` [PATCH v6 00/42] SEV-ES guest support Lendacky, Thomas
2020-03-31 0:47 ` [edk2-devel] " Dong, Eric
2020-04-01 20:42 ` Lendacky, Thomas
2020-04-02 0:12 ` Dong, Eric
[not found] ` <1601D84A636A7BFC.25844@groups.io>
2020-04-14 15:30 ` Dong, Eric
2020-04-16 13:46 ` Lendacky, Thomas
2020-04-17 9:10 ` Dong, Eric
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox