[edk2-devel] USB Enumeration Timeout on Warm Reset with XhciDxe in EDK2+SlimBootloader

[edk2-devel] USB Enumeration Timeout on Warm Reset with XhciDxe in EDK2+SlimBootloader

[Hamit Can Karaca via groups.io]

[-- Attachment #1: Type: text/plain, Size: 1323 bytes --]

Hello,

On a cold boot, the USB stick enumerates normally. On a warm reset (UEFI Reset/Reboot) the same device hits a timeout during slot enable / address assignment. This is the log i get:
…
Enable Slot Successfully, The Slot ID = 0x2
Slot 2 address not assigned successfully. Status = Time out
Command Ring Control set Command Abort, SlotId: 2
Disable device slot 2!
XhcDisableSlotCmd: Disable Slot Command Failed, Status = Time out
XhcControlTransfer: error - Device Error, transfer - 100
UsbEnumerateNewDev: failed to set device address - Device Error
…

After that failure, a second warm reset succeeds, but the failure recurs on the next reset. On a cold shutdown + power-on, enumeration always works. Release and Debug builds show the same behavior. Removing certain USB sticks in the UEFI Boot Manager occasionally hangs the menu—requiring a full power-cycle.

I couldn't find any solutions, can you please help me?

Thanks.


-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#121290): https://edk2.groups.io/g/devel/message/121290
Mute This Topic: https://groups.io/mt/112501554/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-



[-- Attachment #2: Type: text/html, Size: 2086 bytes --]