From: "Zhang, Chao B" <chao.b.zhang@intel.com>
To: "Yao, Jiewen" <jiewen.yao@intel.com>,
"edk2-devel@lists.01.org" <edk2-devel@lists.01.org>
Cc: "Zeng, Star" <star.zeng@intel.com>
Subject: Re: [PATCH 1/2] SecurityPkg: Tcg2Dxe: Log Startup Locality Event
Date: Tue, 24 Jan 2017 00:20:26 +0000 [thread overview]
Message-ID: <FF72C7E4248F3C4E9BDF19D4918E90F2494F8C7A@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <74D8A39837DF1E4DA445A8C0B3885C503A8E467A@shsmsx102.ccr.corp.intel.com>
Jiewen:
Actually I tried item 2 in PEI & produce hob for DXE to consume. But basing on my test
No TPM we have can support such feature defined in PTP00.47. PCR[0] after Startup(CLEAR) always
shows zero.
I will choose option 1 first.
From: Yao, Jiewen
Sent: Monday, January 23, 2017 11:25 PM
To: Zhang, Chao B <chao.b.zhang@intel.com>; edk2-devel@lists.01.org
Cc: Zhang, Chao B <chao.b.zhang@intel.com>; Zeng, Star <star.zeng@intel.com>
Subject: RE: [edk2] [PATCH 1/2] SecurityPkg: Tcg2Dxe: Log Startup Locality Event
Hi
StartupLocality is a platform policy. We should not hardcode it.
We may use one of below ways:
1) Define a new PCD.
2) Detect if there is an startuplocality event hob reported in PEI phase.
Thank you
Yao Jiewen
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of Zhang,
> Chao B
> Sent: Monday, January 23, 2017 4:52 PM
> To: edk2-devel@lists.01.org<mailto:edk2-devel@lists.01.org>
> Cc: Yao, Jiewen <jiewen.yao@intel.com<mailto:jiewen.yao@intel.com>>; Zhang, Chao B
> <chao.b.zhang@intel.com<mailto:chao.b.zhang@intel.com>>; Zeng, Star <star.zeng@intel.com<mailto:star.zeng@intel.com>>
> Subject: [edk2] [PATCH 1/2] SecurityPkg: Tcg2Dxe: Log Startup Locality Event
>
> Log Startup Locality Event according to TCG PC Client PFP 00.21.
> Event should be placed before any extend to PCR[0]
> http://www.trustedcomputinggroup.org/wp-content/uploads/PC-ClientSpecific
> _Platform_Profile_for_TPM_2p0_Systems_v21.pdf
>
> Cc: Star Zeng <star.zeng@intel.com<mailto:star.zeng@intel.com>>
> Cc: Yao Jiewen <jiewen.yao@intel.com<mailto:jiewen.yao@intel.com>>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Chao Zhang <chao.b.zhang@intel.com<mailto:chao.b.zhang@intel.com>>
> ---
> SecurityPkg/Tcg/Tcg2Dxe/Tcg2Dxe.c | 48
> ++++++++++++++++++++++++++++++---------
> 1 file changed, 37 insertions(+), 11 deletions(-)
>
> diff --git a/SecurityPkg/Tcg/Tcg2Dxe/Tcg2Dxe.c
> b/SecurityPkg/Tcg/Tcg2Dxe/Tcg2Dxe.c
> index 3534fd1..2658944 100644
> --- a/SecurityPkg/Tcg/Tcg2Dxe/Tcg2Dxe.c
> +++ b/SecurityPkg/Tcg/Tcg2Dxe/Tcg2Dxe.c
> @@ -1381,11 +1381,12 @@ SetupEventLog (
> UINT32 HashAlgorithmMaskCopied;
> TCG_EfiSpecIDEventStruct *TcgEfiSpecIdEventStruct;
> UINT8
> TempBuf[sizeof(TCG_EfiSpecIDEventStruct) + sizeof(UINT32) + (HASH_COUNT *
> sizeof(TCG_EfiSpecIdEventAlgorithmSize)) + sizeof(UINT8)];
> - TCG_PCR_EVENT_HDR FirstPcrEvent;
> + TCG_PCR_EVENT_HDR NoActionEvent;
> TCG_EfiSpecIdEventAlgorithmSize *DigestSize;
> TCG_EfiSpecIdEventAlgorithmSize *TempDigestSize;
> UINT8 *VendorInfoSize;
> UINT32 NumberOfAlgorithms;
> + TCG_EfiStartupLocalityEvent StartupLocalityEvent;
>
> DEBUG ((EFI_D_INFO, "SetupEventLog\n"));
>
> @@ -1468,24 +1469,49 @@ SetupEventLog (
> VendorInfoSize = (UINT8 *)TempDigestSize;
> *VendorInfoSize = 0;
>
> + NoActionEvent.PCRIndex = 0;
> + NoActionEvent.EventType = EV_NO_ACTION;
> + ZeroMem (&NoActionEvent.Digest, sizeof(NoActionEvent.Digest));
> + NoActionEvent.EventSize = (UINT32)GetTcgEfiSpecIdEventStructSize
> (TcgEfiSpecIdEventStruct);
> +
> //
> - // FirstPcrEvent
> + // Log TcgEfiSpecIdEventStruct as the first Event
> + // TCG PC Client PFP spec. Section 9.2 Measurement Event Entries
> and Log
> //
> - FirstPcrEvent.PCRIndex = 0;
> - FirstPcrEvent.EventType = EV_NO_ACTION;
> - ZeroMem (&FirstPcrEvent.Digest, sizeof(FirstPcrEvent.Digest));
> - FirstPcrEvent.EventSize = (UINT32)GetTcgEfiSpecIdEventStructSize
> (TcgEfiSpecIdEventStruct);
> + Status = TcgDxeLogEvent (
> + mTcg2EventInfo[Index].LogFormat,
> + &NoActionEvent,
> + sizeof(NoActionEvent),
> + (UINT8 *)TcgEfiSpecIdEventStruct,
> + NoActionEvent.EventSize
> + );
>
> //
> - // Record
> + // EfiStartupLocalityEvent
> + //
> + CopyMem (StartupLocalityEvent.Signature,
> TCG_EfiStartupLocalityEvent_SIGNATURE,
> sizeof(StartupLocalityEvent.Signature));
> + //
> + // SRTM uses Locality 0 to access the TPM according to PC Client PFP
> spec 2.2.1
> + //
> + StartupLocalityEvent.StartupLocality = LOCALITY_0_INDICATOR;
> +
> + NoActionEvent.PCRIndex = 0;
> + NoActionEvent.EventType = EV_NO_ACTION;
> + ZeroMem (&NoActionEvent.Digest, sizeof(NoActionEvent.Digest));
> + NoActionEvent.EventSize = sizeof(StartupLocalityEvent);
> +
> + //
> + // Log EfiStartupLocalityEvent as the second Event
> + // TCG PC Client PFP spec. Section 9.3.4.3 Startup Locality Event
> //
> Status = TcgDxeLogEvent (
> mTcg2EventInfo[Index].LogFormat,
> - &FirstPcrEvent,
> - sizeof(FirstPcrEvent),
> - (UINT8 *)TcgEfiSpecIdEventStruct,
> - FirstPcrEvent.EventSize
> + &NoActionEvent,
> + sizeof(NoActionEvent),
> + (UINT8 *)&StartupLocalityEvent,
> + NoActionEvent.EventSize
> );
> +
> }
> }
> }
> --
> 1.9.5.msysgit.1
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org<mailto:edk2-devel@lists.01.org>
> https://lists.01.org/mailman/listinfo/edk2-devel
prev parent reply other threads:[~2017-01-24 0:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-23 8:51 [PATCH 1/2] SecurityPkg: Tcg2Dxe: Log Startup Locality Event Zhang, Chao B
2017-01-23 8:51 ` [PATCH 2/2] MdePkg : UefiTcgPlatform.h: Define Startup Locality Event & Indicator Zhang, Chao B
2017-01-23 15:25 ` [PATCH 1/2] SecurityPkg: Tcg2Dxe: Log Startup Locality Event Yao, Jiewen
2017-01-24 0:20 ` Zhang, Chao B [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=FF72C7E4248F3C4E9BDF19D4918E90F2494F8C7A@shsmsx102.ccr.corp.intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox