From: "G Edhaya Chandran" <edhaya.chandran@arm.com>
To: Heinrich Schuchardt <xypron.glpk@gmx.de>,
EDK II Development <devel@edk2.groups.io>
Cc: Eric Jin <eric.jin@intel.com>, Barton Gao <gaojie@byosoft.com.cn>,
Arvin Chen <arvinx.chen@intel.com>,
Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Subject: Re: [PATCH edk2-test 1/1] uefi-sct/SctPkg: type mismatch in Simple Network test
Date: Mon, 5 Apr 2021 14:43:12 +0000 [thread overview]
Message-ID: <HE1PR0801MB16914D438ED981CC642328EDE8779@HE1PR0801MB1691.eurprd08.prod.outlook.com> (raw)
In-Reply-To: <20210330150341.91221-1-xypron.glpk@gmx.de>
Reviewed-by: G Edhaya Chandran<edhaya.chandran@arm.com>
> -----Original Message-----
> From: Heinrich Schuchardt <xypron.glpk@gmx.de>
> Sent: 30 March 2021 20:34
> To: EDK II Development <devel@edk2.groups.io>
> Cc: Eric Jin <eric.jin@intel.com>; G Edhaya Chandran
> <Edhaya.Chandran@arm.com>; Barton Gao <gaojie@byosoft.com.cn>; Arvin
> Chen <arvinx.chen@intel.com>; Samer El-Haj-Mahmoud <Samer.El-Haj-
> Mahmoud@arm.com>; Heinrich Schuchardt <xypron.glpk@gmx.de>
> Subject: [PATCH edk2-test 1/1] uefi-sct/SctPkg: type mismatch in Simple
> Network test
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3257
>
> SctPrint() requires that %x and %d refers to an UINTN parameter.
>
> SimpleNetworkBBTestFunction.c tries to print INT32 using %x, %d without
> converting to UINTN resulting in corrupted output like:
>
> SimpleNetworkBBTestFunction.c:891:
> Status - Unsupported, Filter - AAAA00000000
>
> Mode->ReceiveFilterSetting has only 32 bit. The true value is 0.
>
> Convert the parameters to UINTN.
>
> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
> ---
> .../SimpleNetworkBBTestFunction.c | 52 +++++++++----------
> 1 file changed, 26 insertions(+), 26 deletions(-)
>
> diff --git a/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleNetwork/BlackBoxTest/SimpleNe
> tworkBBTestFunction.c b/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleNetwork/BlackBoxTest/SimpleNe
> tworkBBTestFunction.c
> index 8767e68e92d4..5fc01aadd96a 100644
> --- a/uefi-
> sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleNetwork/BlackBoxTest/SimpleNe
> tworkBBTestFunction.c
> +++ b/uefi-sct/SctPkg/TestCase/UEFI/EFI/Protocol/SimpleNetwork/BlackBoxT
> +++ est/SimpleNetworkBBTestFunction.c
> @@ -775,7 +775,7 @@ BBTestReceiveFilterFunctionTest (
> __FILE__,
> (UINTN)__LINE__,
> Status,
> - SnpInterface->Mode->ReceiveFilterSetting
> + (UINTN)SnpInterface->Mode->ReceiveFilterSetting
> );
>
> // Check point A. Enable Specified bit.
> @@ -797,7 +797,7 @@ BBTestReceiveFilterFunctionTest (
> __FILE__,
> (UINTN)__LINE__,
> Status,
> - SnpInterface->Mode->ReceiveFilterSetting
> + (UINTN)SnpInterface->Mode->ReceiveFilterSetting
> );
>
> // Check point C. Enable and Disable Specified bit together.
> @@ -819,7 +819,7 @@ BBTestReceiveFilterFunctionTest (
> __FILE__,
> (UINTN)__LINE__,
> Status,
> - SnpInterface->Mode->ReceiveFilterSetting
> + (UINTN)SnpInterface->Mode->ReceiveFilterSetting
> );
> }
>
> @@ -856,12 +856,12 @@ BBTestReceiveFilterFunctionTest (
> __FILE__,
> (UINTN)__LINE__,
> Status,
> - SnpInterface->Mode->ReceiveFilterSetting,
> - SnpInterface->Mode->ReceiveFilterMask,
> - SnpInterface->Mode->MCastFilterCount,
> - SnpInterface->Mode->MCastFilter[0].Addr[0],
> - SnpInterface->Mode->MCastFilter[0].Addr[5],
> - SnpInterface->Mode->MCastFilter[1].Addr[0]
> + (UINTN)SnpInterface->Mode->ReceiveFilterSetting,
> + (UINTN)SnpInterface->Mode->ReceiveFilterMask,
> + (UINTN)SnpInterface->Mode->MCastFilterCount,
> + (UINTN)SnpInterface->Mode->MCastFilter[0].Addr[0],
> + (UINTN)SnpInterface->Mode->MCastFilter[0].Addr[5],
> + (UINTN)SnpInterface->Mode->MCastFilter[1].Addr[0]
> );
> }
>
> @@ -885,17 +885,17 @@ BBTestReceiveFilterFunctionTest (
> AssertionType,
> gSimpleNetworkBBTestFunctionAssertionGuid012,
> L"EFI_SIMPLE_NETWORK_PROTOCOL.ReceiveFilters - Invoke
> ReceiveFilters() to reset multicast receive filters list and verify interface
> correctness within test case",
> - L"%a:%d:Status - %r, Filter - %x, Mask - %x,Count - %d(%d), Address -
> %x, %x, %x",
> + L"%a:%d:Status - %r, Filter - %x, Mask - %x, Count -
> + %d(%d), Address - %x, %x, %x",
> __FILE__,
> (UINTN)__LINE__,
> Status,
> - SnpInterface->Mode->ReceiveFilterSetting,
> - SnpInterface->Mode->ReceiveFilterMask,
> - SnpInterface->Mode->MCastFilterCount,
> - Mode.MCastFilterCount,
> - SnpInterface->Mode->MCastFilter[0].Addr[0],
> - SnpInterface->Mode->MCastFilter[0].Addr[5],
> - SnpInterface->Mode->MCastFilter[1].Addr[0]
> + (UINTN)SnpInterface->Mode->ReceiveFilterSetting,
> + (UINTN)SnpInterface->Mode->ReceiveFilterMask,
> + (UINTN)SnpInterface->Mode->MCastFilterCount,
> + (UINTN)Mode.MCastFilterCount,
> + (UINTN)SnpInterface->Mode->MCastFilter[0].Addr[0],
> + (UINTN)SnpInterface->Mode->MCastFilter[0].Addr[5],
> + (UINTN)SnpInterface->Mode->MCastFilter[1].Addr[0]
> );
> //
> // Restore SNP State
> @@ -1358,12 +1358,12 @@ BBTestMCastIpToMacFunctionTest (
> __FILE__,
> (UINTN)__LINE__,
> Status,
> - MAC1.Addr[0],
> - MAC1.Addr[1],
> - MAC1.Addr[2],
> - MAC1.Addr[3],
> - MAC1.Addr[4],
> - MAC1.Addr[5]
> + (UINTN)MAC1.Addr[0],
> + (UINTN)MAC1.Addr[1],
> + (UINTN)MAC1.Addr[2],
> + (UINTN)MAC1.Addr[3],
> + (UINTN)MAC1.Addr[4],
> + (UINTN)MAC1.Addr[5]
> );
>
> //
> @@ -1510,8 +1510,8 @@ BBTestNVDataFunctionTest (
> __FILE__,
> (UINTN)__LINE__,
> Status,
> - SnpInterface->Mode->NvRamSize,
> - SnpInterface->Mode->NvRamAccessSize
> + (UINTN)SnpInterface->Mode->NvRamSize,
> + (UINTN)SnpInterface->Mode->NvRamAccessSize
> );
> }
>
> @@ -1919,7 +1919,7 @@ BBTestGetStatusFunctionTest (
> (UINTN)__LINE__,
> Status,
> Status1,
> - InterruptStatus
> + (UINTN)InterruptStatus
> );
> }
>
> --
> 2.30.2
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
next prev parent reply other threads:[~2021-04-05 14:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-30 15:03 [PATCH edk2-test 1/1] uefi-sct/SctPkg: type mismatch in Simple Network test Heinrich Schuchardt
2021-04-05 14:43 ` G Edhaya Chandran [this message]
2021-05-09 17:09 ` Samer El-Haj-Mahmoud
2021-05-12 7:33 ` [edk2-devel] " G Edhaya Chandran
2021-05-12 9:53 ` Sunny Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=HE1PR0801MB16914D438ED981CC642328EDE8779@HE1PR0801MB1691.eurprd08.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox