Re: update capsule image on Quark SoC x1000 Gen2

["Iddamsetty, Aravind (Artesyn)" <Aravind.Iddamsetty@Artesyn.com>]

Hi Mike,

Thank you for your response.

The issue that I am facing is not on Galileo Gen2 but on our custom board which has Quark Soc x1000 same as that on Galileo Gen2. I am able to do a Capsule update on Galileo Gen2, but when I try on our custom board it throws me the error that I have shared earlier.

I have connected a flyswatter2 debugger and analyzed the EIP (EIP  - 3F8EE1DC) when the exception occurred, this is pointing to below line from the file MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.c line 639

    while ((SerialPortReadRegister (SerialRegisterBase, R_UART_LSR) & B_UART_LSR_TEMT) == 0);

Thanks & Regards,
Aravind.    

-----Original Message-----
From: Kinney, Michael D [mailto:michael.d.kinney@intel.com] 
Sent: Thursday, January 12, 2017 1:54 AM
To: Iddamsetty, Aravind [ENGINEERING/IN]; edk2-devel@lists.01.org; Kinney, Michael D
Subject: RE: update capsule image on Quark SoC x1000 Gen2

Aravind,

I am trying to reproduce this issue and so far everything works for me.

I pulled the sources this morning (df3f02df1bde40c2a0d486d3ca6bd529c3654049)

I did the following build command (I am using VS2015x86 by default)

	build -a IA32 -n 5 -t VS2015x86 -p QuarkPlatformPkg\Quark.dsc -D CAPSULE_ENABLE

After the build, I copied the following 2 files to the root of a USB flash drive:

	CapsuleApp.efi
	QUARKFIRMWAREUPDATECAPSULEFMPPKCS7.Cap

I booted Galileo Gen2 to the UEFI Shell, and selected FS1: for my USB flash drive and ran the following command:

	FS1:> CapsuleApp.efi QUARKFIRMWAREUPDATECAPSULEFMPPKCS7.Cap

I do not have VS2010 installed.  I did try VS2008 and that worked as well.

Please verify that you have the latest VS2010 service packs installed.

Best regards,

Mike



> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of 
> Iddamsetty, Aravind (Artesyn)
> Sent: Monday, January 9, 2017 4:40 AM
> To: edk2-devel@lists.01.org
> Subject: [edk2] update capsule image on Quark SoC x1000 Gen2
> 
> Hello,
> 
> I am trying to update Bios flash from UEFI shell. I get the following error.
> Kindly need help on this.
> 
> Evaluate DXE DEPEX for FFS(378D7B65-8DA9-4773-B6E4-A47826A833E1)
>   PUSH GUID(1E5668E2-8481-11D4-BCF1-0080C73C8881) = FALSE
>   PUSH GUID(6441F818-6362-4E44-B!!!! IA32 Exception Type - 00(#DE - 
> Divide Error) CPU Apic ID - 00000000 !!!!
> EIP  - 3F8EE1DC, CS  - 00000010, EFLAGS - 00000246 EAX  - 9000B000, 
> ECX - 00000042, EDX - 00000010, EBX - 0000003B ESP  - 3F8DADD4, EBP - 
> 3F8DAEE4, ESI - 3F8DAE04, EDI - 0000001B
> DS   - 00000008, ES  - 00000008, FS  - 00000008, GS  - 00000008, SS - 00000008
> CR0  - 00000013, CR2 - 00000000, CR3 - 00000000, CR4 - 00000000
> DR0  - 00000000, DR1 - 00000000, DR2 - 00000000, DR3 - 00000000
> DR6  - FFFF0FF0, DR7 - 00000400
> GDTR - 3F839E90 00000047, IDTR - 3F577010 000007FF LDTR - 00000000, TR 
> - 00000000 FXSAVE_STATE - 3F8DAB10 !!!! Find PE image 
> c:\sspro\build\Build\SSPRO- 
> MINI\DEBUG_VS2010x86\IA32\MdeModulePkg\Core\Dxe\DxeMain\DEBUG\DxeCore.
> pdb (ImageBase=3F8DB000, EntryPoint=3F8DB260) !!!!
> 
> 
> 
> Command used : CapsuleApp QUARKFIRMWAREUPDATECAPSULEFMPPKCS7.Cap
> 
> 
> Thanks & Regards,
> Aravind
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel