From: "sunceping" <cepingx.sun@intel.com>
To: "Yao, Jiewen" <jiewen.yao@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Aktas, Erdem" <erdemaktas@google.com>,
"Xu, Min M" <min.m.xu@intel.com>,
Gerd Hoffmann <kraxel@redhat.com>,
"Reshetova, Elena" <elena.reshetova@intel.com>,
"Sun, CepingX" <cepingx.sun@intel.com>
Subject: Re: [edk2-devel] [PATCH V1 1/1] OvmfPkg/QemuBootOrderLib: Measure the etc/boot-menu-wait
Date: Wed, 13 Mar 2024 08:39:40 +0000 [thread overview]
Message-ID: <IA0PR11MB8355C28527E21538E0194CE6E72A2@IA0PR11MB8355.namprd11.prod.outlook.com> (raw)
In-Reply-To: <MW4PR11MB587254BBC51A29ED798B861E8C2B2@MW4PR11MB5872.namprd11.prod.outlook.com>
On Tuesday, March 12, 2024 3:58 PM Yao, Jiewen wrote:
> Subject: RE: [PATCH V1 1/1] OvmfPkg/QemuBootOrderLib: Measure the
> etc/boot-menu-wait
>
> Thanks for the patch.
>
> Is this the only missing configuration data?
> Or do you have more on the way?
>
This is not the only missing configuration data.
There are other configurations need to be measured.
We have a draft PR(https://github.com/tianocore/edk2/pull/5440)
to measure the below items:
etc/system-states
opt/ovmf/X-PciMmio64Mb
etc/reserved-memory-end
etc/boot-menu-wait
etc./extra-pci-roots
According to Hoffmann's comments,
we would prepare a single patch series with all measurements in next version.
Thanks
Ceping
>
> > -----Original Message-----
> > From: Sun, CepingX <cepingx.sun@intel.com>
> > Sent: Wednesday, March 13, 2024 7:52 AM
> > To: devel@edk2.groups.io
> > Cc: Sun, CepingX <cepingx.sun@intel.com>; Aktas, Erdem
> > <erdemaktas@google.com>; Yao, Jiewen <jiewen.yao@intel.com>; Xu, Min
> M
> > <min.m.xu@intel.com>; Gerd Hoffmann <kraxel@redhat.com>; Reshetova,
> > Elena <elena.reshetova@intel.com>
> > Subject: [PATCH V1 1/1] OvmfPkg/QemuBootOrderLib: Measure the
> > etc/boot- menu-wait
> >
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4415
> >
> > Refer to the section 8.3.4 of tdx-virtual-firmware-design-guide spec,
> > OVMF would uses FW_CFG_IO_SELECTOR(0x510) and
> FW_CFG_IO_DATA(0x511) to
> > get configuration data from QEMU. From the security perspective, if
> > TDVF uses this method, configuration data must be measured into
> > RTMR[0].
> >
> > Currently, the etc/boot-menu-wait is using in TDVF, it required to be
> > measured into RTMR[0].
> >
> > This is the first patch and will continue to be updated to measure
> > additional configuration data.
> >
> > Refernce:
> > spec: https://cdrdv2.intel.com/v1/dl/getContent/733585
> >
> > Cc: Erdem Aktas <erdemaktas@google.com>
> > Cc: Jiewen Yao <jiewen.yao@intel.com>
> > Cc: Min Xu <min.m.xu@intel.com>
> > Cc: Gerd Hoffmann <kraxel@redhat.com>
> > Cc: Elena Reshetova <elena.reshetova@intel.com>
> > Signed-off-by: Ceping Sun <cepingx.sun@intel.com>
> > ---
> > .../QemuBootOrderLib/QemuBootOrderLib.c | 21
> ++++++++++++++++++-
> > .../QemuBootOrderLib/QemuBootOrderLib.inf | 1 +
> > 2 files changed, 21 insertions(+), 1 deletion(-)
> >
> > diff --git a/OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.c
> > b/OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.c
> > index 2fe6ab30c032..63a290712002 100644
> > --- a/OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.c
> > +++ b/OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.c
> > @@ -20,6 +20,8 @@
> > #include <Library/BaseMemoryLib.h>
> > #include <Guid/GlobalVariable.h>
> > #include <Guid/VirtioMmioTransport.h>
> > +#include <IndustryStandard/UefiTcgPlatform.h>
> > +#include <Library/TpmMeasurementLib.h>
> >
> > #include "ExtraRootBusMap.h"
> >
> > @@ -41,6 +43,9 @@
> > #define REQUIRED_MMIO_OFW_NODES 1
> > #define EXAMINED_OFW_NODES 6
> >
> > +#define EV_POSTCODE_INFO_QEMU_BOOTMENU_WAIT_TIME_DATA
> "QEMU
> > BOOTMENU WAIT TIME"
> > +#define QEMU_BOOTMENU_WAIT_DATA_LEN
> > (sizeof(EV_POSTCODE_INFO_QEMU_BOOTMENU_WAIT_TIME_DATA) - 1)
> > +
> > /**
> > Simple character classification routines, corresponding to POSIX class
> names
> > and ASCII encoding.
> > @@ -2418,5 +2423,19 @@ GetFrontPageTimeoutFromQemu (
> > // seconds, round N up.
> > //
> > QemuFwCfgSelectItem (BootMenuWaitItem);
> > - return (UINT16)((QemuFwCfgRead16 () + 999) / 1000);
> > + Timeout = QemuFwCfgRead16 ();
> > + //
> > + // Measure the Timeout which is downloaded from QEMU.
> > + // It has to be done before it is consumed.
> > + //
> > + TpmMeasureAndLogData (
> > + 1,
> > + EV_PLATFORM_CONFIG_FLAGS,
> > + EV_POSTCODE_INFO_QEMU_BOOTMENU_WAIT_TIME_DATA,
> > + QEMU_BOOTMENU_WAIT_DATA_LEN,
> > + (VOID *)(UINTN)&Timeout,
> > + BootMenuWaitSize
> > + );
> > +
> > + return (UINT16)((Timeout + 999) / 1000);
> > }
> > diff --git a/OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.inf
> > b/OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.inf
> > index 6e320e3e8514..0231c9d5c5b8 100644
> > --- a/OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.inf
> > +++ b/OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.inf
> > @@ -45,6 +45,7 @@
> > DevicePathLib
> > BaseMemoryLib
> > OrderedCollectionLib
> > + TpmMeasurementLib
> >
> > [Guids]
> > gEfiGlobalVariableGuid
> > --
> > 2.34.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#116710): https://edk2.groups.io/g/devel/message/116710
Mute This Topic: https://groups.io/mt/104880546/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2024-03-13 8:39 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-12 23:51 [edk2-devel] [PATCH V1 1/1] OvmfPkg/QemuBootOrderLib: Measure the etc/boot-menu-wait sunceping
2024-03-12 7:57 ` Yao, Jiewen
2024-03-13 8:39 ` sunceping [this message]
2024-03-12 11:04 ` Gerd Hoffmann
2024-03-13 8:50 ` sunceping
2024-03-14 9:30 ` Gerd Hoffmann
2024-03-20 8:41 ` sunceping
2024-03-20 10:04 ` Gerd Hoffmann
2024-03-21 8:39 ` sunceping
2024-03-21 12:25 ` Gerd Hoffmann
2024-03-22 8:29 ` sunceping
2024-03-22 9:05 ` Gerd Hoffmann
2024-03-26 9:08 ` sunceping
2024-03-26 15:44 ` Gerd Hoffmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=IA0PR11MB8355C28527E21538E0194CE6E72A2@IA0PR11MB8355.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox