From: "Chang, Abner via groups.io" <abner.chang=amd.com@groups.io>
To: "Chesley, Brit" <Brit.Chesley@amd.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Attar, AbdulLateef (Abdul Lateef)" <AbdulLateef.Attar@amd.com>
Subject: Re: [edk2-devel] [PATCH v1 5/6] MdeModulePkg: SpiHc: SpiHc Drivers
Date: Thu, 2 May 2024 04:25:30 +0000 [thread overview]
Message-ID: <LV8PR12MB9452BCE1EC93CB6CBEBA571CEA182@LV8PR12MB9452.namprd12.prod.outlook.com> (raw)
In-Reply-To: <20240501190527.200937-6-brit.chesley@amd.com>
[AMD Official Use Only - General]
We had reviewed this patch internally before sending this to community.
Reviewed-by: Abner Chang <abner.chang@amd.com>
> -----Original Message-----
> From: Chesley, Brit <Brit.Chesley@amd.com>
> Sent: Thursday, May 2, 2024 3:05 AM
> To: devel@edk2.groups.io
> Cc: Chang, Abner <Abner.Chang@amd.com>; Attar, AbdulLateef (Abdul
> Lateef) <AbdulLateef.Attar@amd.com>
> Subject: [PATCH v1 5/6] MdeModulePkg: SpiHc: SpiHc Drivers
>
> From: Brit Chesley <brit.chesley@amd.com>
>
> Added SpiHc DXE and SMM drivers. This code receives bus transactions
> from the SpiBus layer and passes them onto the SpiHcPlatformLib
>
> Platform Initialization Spec 1.7 volume 5 section 18.1.7
>
> Bugzilla #4753
>
> Cc: Abner Chang <abner.chang@amd.com>
> Cc: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
> Signed-off-by: Brit Chesley <brit.chesley@amd.com>
> ---
> MdeModulePkg/Bus/Spi/SpiHc/SpiHcDxe.inf | 47 ++++++++++
> MdeModulePkg/Bus/Spi/SpiHc/SpiHcSmm.inf | 45 +++++++++
> MdeModulePkg/Bus/Spi/SpiHc/SpiHc.h | 117
> ++++++++++++++++++++++++
> MdeModulePkg/Bus/Spi/SpiHc/SpiHc.c | 115
> +++++++++++++++++++++++
> MdeModulePkg/Bus/Spi/SpiHc/SpiHcDxe.c | 101 ++++++++++++++++++++
> MdeModulePkg/Bus/Spi/SpiHc/SpiHcSmm.c | 79 ++++++++++++++++
> MdeModulePkg/Bus/Spi/SpiHc/SpiHc.uni | 10 ++
> 7 files changed, 514 insertions(+)
> create mode 100644 MdeModulePkg/Bus/Spi/SpiHc/SpiHcDxe.inf
> create mode 100644 MdeModulePkg/Bus/Spi/SpiHc/SpiHcSmm.inf
> create mode 100644 MdeModulePkg/Bus/Spi/SpiHc/SpiHc.h
> create mode 100644 MdeModulePkg/Bus/Spi/SpiHc/SpiHc.c
> create mode 100644 MdeModulePkg/Bus/Spi/SpiHc/SpiHcDxe.c
> create mode 100644 MdeModulePkg/Bus/Spi/SpiHc/SpiHcSmm.c
> create mode 100644 MdeModulePkg/Bus/Spi/SpiHc/SpiHc.uni
>
> diff --git a/MdeModulePkg/Bus/Spi/SpiHc/SpiHcDxe.inf
> b/MdeModulePkg/Bus/Spi/SpiHc/SpiHcDxe.inf
> new file mode 100644
> index 000000000000..b71f1535cd46
> --- /dev/null
> +++ b/MdeModulePkg/Bus/Spi/SpiHc/SpiHcDxe.inf
> @@ -0,0 +1,47 @@
> +## @file
> +# The SPI Host Controller Module DXE driver INF file
> +#
> +# Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 1.27
> + BASE_NAME = SpiHcDxe
> + FILE_GUID = 95D148FF-5A23-43B9-9FC4-80AE0DD48D32
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 0.1
> + PI_SPECIFICATION_VERSION = 0x0001000A
> + ENTRY_POINT = SpiHcProtocolEntry
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + BaseMemoryLib
> + DebugLib
> + DevicePathLib
> + MemoryAllocationLib
> + SpiHcPlatformLib
> + UefiBootServicesTableLib
> + UefiDriverEntryPoint
> + UefiLib
> + UefiRuntimeServicesTableLib
> +
> +[Sources]
> + SpiHc.h
> + SpiHc.c
> + SpiHcDxe.c
> +
> +[Protocols]
> + gEfiSpiHcProtocolGuid
> +
> +[Depex]
> + TRUE
> +
> +[UserExtensions.TianoCore."ExtraFiles"]
> + SpiHc.uni
> diff --git a/MdeModulePkg/Bus/Spi/SpiHc/SpiHcSmm.inf
> b/MdeModulePkg/Bus/Spi/SpiHc/SpiHcSmm.inf
> new file mode 100644
> index 000000000000..95d5466d904b
> --- /dev/null
> +++ b/MdeModulePkg/Bus/Spi/SpiHc/SpiHcSmm.inf
> @@ -0,0 +1,45 @@
> +## @file
> +# The SPI Host Controller Module SMM driver INF file
> +#
> +# Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.
> +#
> +# SPDX-License-Identifier: BSD-2-Clause-Patent
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 1.27
> + BASE_NAME = SpiHcSmm
> + FILE_GUID = 0CDAE298-CB3B-480A-BDC4-A6840FFE1F5E
> + MODULE_TYPE = DXE_SMM_DRIVER
> + VERSION_STRING = 0.1
> + PI_SPECIFICATION_VERSION = 0x0001000A
> + ENTRY_POINT = SpiHcProtocolEntry
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + BaseMemoryLib
> + DebugLib
> + MemoryAllocationLib
> + MmServicesTableLib
> + SpiHcPlatformLib
> + UefiDriverEntryPoint
> + UefiLib
> +
> +[Sources]
> + SpiHc.h
> + SpiHc.c
> + SpiHcSmm.c
> +
> +[Protocols]
> + gEfiSpiSmmHcProtocolGuid
> +
> +[Depex]
> + TRUE
> +
> +[UserExtensions.TianoCore."ExtraFiles"]
> + SpiHc.uni
> diff --git a/MdeModulePkg/Bus/Spi/SpiHc/SpiHc.h
> b/MdeModulePkg/Bus/Spi/SpiHc/SpiHc.h
> new file mode 100644
> index 000000000000..c6e4c5893d53
> --- /dev/null
> +++ b/MdeModulePkg/Bus/Spi/SpiHc/SpiHc.h
> @@ -0,0 +1,117 @@
> +/** @file
> +
> + SPI Host Controller function declarations
> +
> + Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +
> +#ifndef SPI_HC_H_
> +#define SPI_HC_H_
> +
> +#include <PiDxe.h>
> +#include <Library/BaseLib.h>
> +#include <Library/BaseMemoryLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/IoLib.h>
> +#include <Protocol/SpiHc.h>
> +#include <Library/SpiHcPlatformLib.h>
> +
> +/**
> + Assert or deassert the SPI chip select.
> +
> + This routine is called at TPL_NOTIFY.
> + Update the value of the chip select line for a SPI peripheral. The SPI bus
> + layer calls this routine either in the board layer or in the SPI controller
> + to manipulate the chip select pin at the start and end of a SPI transaction.
> +
> + @param[in] This Pointer to an EFI_SPI_HC_PROTOCOL structure.
> + @param[in] SpiPeripheral The address of an EFI_SPI_PERIPHERAL data
> structure
> + describing the SPI peripheral whose chip select pin
> + is to be manipulated. The routine may access the
> + ChipSelectParameter field to gain sufficient
> + context to complete the operati on.
> + @param[in] PinValue The value to be applied to the chip select line of
> + the SPI peripheral.
> +
> + @retval EFI_SUCCESS The chip select was set as requested
> + @retval EFI_NOT_READY Support for the chip select is not properly
> + initialized
> + @retval EFI_INVALID_PARAMETER The ChipSeLect value or its contents are
> + invalid
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +ChipSelect (
> + IN CONST EFI_SPI_HC_PROTOCOL *This,
> + IN CONST EFI_SPI_PERIPHERAL *SpiPeripheral,
> + IN BOOLEAN PinValue
> + );
> +
> +/**
> + Set up the clock generator to produce the correct clock frequency, phase
> and
> + polarity for a SPI chip.
> +
> + This routine is called at TPL_NOTIFY.
> + This routine updates the clock generator to generate the correct frequency
> + and polarity for the SPI clock.
> +
> + @param[in] This Pointer to an EFI_SPI_HC_PROTOCOL structure.
> + @param[in] SpiPeripheral Pointer to a EFI_SPI_PERIPHERAL data structure
> from
> + which the routine can access the ClockParameter,
> + ClockPhase and ClockPolarity fields. The routine
> + also has access to the names for the SPI bus and
> + chip which can be used during debugging.
> + @param[in] ClockHz Pointer to the requested clock frequency. The SPI
> + host controller will choose a supported clock
> + frequency which is less then or equal to this
> + value. Specify zero to turn the clock generator
> + off. The actual clock frequency supported by the
> + SPI host controller will be returned.
> +
> + @retval EFI_SUCCESS The clock was set up successfully
> + @retval EFI_UNSUPPORTED The SPI controller was not able to support the
> + frequency requested by ClockHz
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +Clock (
> + IN CONST EFI_SPI_HC_PROTOCOL *This,
> + IN CONST EFI_SPI_PERIPHERAL *SpiPeripheral,
> + IN UINT32 *ClockHz
> + );
> +
> +/**
> + Perform the SPI transaction on the SPI peripheral using the SPI host
> + controller.
> +
> + This routine is called at TPL_NOTIFY.
> + This routine synchronously returns EFI_SUCCESS indicating that the
> + asynchronous SPI transaction was started. The routine then waits for
> + completion of the SPI transaction prior to returning the final transaction
> + status.
> +
> + @param[in] This Pointer to an EFI_SPI_HC_PROTOCOL structure.
> + @param[in] BusTransaction Pointer to a EFI_SPI_BUS_ TRANSACTION
> containing
> + the description of the SPI transaction to perform.
> +
> + @retval EFI_SUCCESS The transaction completed successfully
> + @retval EFI_BAD_BUFFER_SIZE The BusTransaction->WriteBytes value is
> invalid,
> + or the BusTransaction->ReadinBytes value is
> + invalid
> + @retval EFI_UNSUPPORTED The BusTransaction-> Transaction Type is
> + unsupported
> + @retval EFI_DEVICE_ERROR SPI Host Controller failed transaction
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +Transaction (
> + IN CONST EFI_SPI_HC_PROTOCOL *This,
> + IN EFI_SPI_BUS_TRANSACTION *BusTransaction
> + );
> +
> +#endif //SPI_HC_H_
> diff --git a/MdeModulePkg/Bus/Spi/SpiHc/SpiHc.c
> b/MdeModulePkg/Bus/Spi/SpiHc/SpiHc.c
> new file mode 100644
> index 000000000000..9d7bf9f542ef
> --- /dev/null
> +++ b/MdeModulePkg/Bus/Spi/SpiHc/SpiHc.c
> @@ -0,0 +1,115 @@
> +/** @file
> +
> + SPI Host Controller shell implementation, as host controller code is platform
> + specfic.
> +
> + Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +#include "SpiHc.h"
> +
> +/**
> + Assert or deassert the SPI chip select.
> +
> + This routine is called at TPL_NOTIFY.
> + Update the value of the chip select line for a SPI peripheral. The SPI bus
> + layer calls this routine either in the board layer or in the SPI controller
> + to manipulate the chip select pin at the start and end of a SPI transaction.
> +
> + @param[in] This Pointer to an EFI_SPI_HC_PROTOCOL structure.
> + @param[in] SpiPeripheral The address of an EFI_SPI_PERIPHERAL data
> structure
> + describing the SPI peripheral whose chip select pin
> + is to be manipulated. The routine may access the
> + ChipSelectParameter field to gain sufficient
> + context to complete the operati on.
> + @param[in] PinValue The value to be applied to the chip select line of
> + the SPI peripheral.
> +
> + @retval EFI_SUCCESS The chip select was set as requested
> + @retval EFI_NOT_READY Support for the chip select is not properly
> + initialized
> + @retval EFI_INVALID_PARAMETER The ChipSeLect value or its contents are
> + invalid
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +ChipSelect (
> + IN CONST EFI_SPI_HC_PROTOCOL *This,
> + IN CONST EFI_SPI_PERIPHERAL *SpiPeripheral,
> + IN BOOLEAN PinValue
> + )
> +{
> + return PlatformSpiHcChipSelect (This, SpiPeripheral, PinValue);
> +}
> +
> +/**
> + Set up the clock generator to produce the correct clock frequency, phase
> and
> + polarity for a SPI chip.
> +
> + This routine is called at TPL_NOTIFY.
> + This routine updates the clock generator to generate the correct frequency
> + and polarity for the SPI clock.
> +
> + @param[in] This Pointer to an EFI_SPI_HC_PROTOCOL structure.
> + @param[in] SpiPeripheral Pointer to a EFI_SPI_PERIPHERAL data structure
> from
> + which the routine can access the ClockParameter,
> + ClockPhase and ClockPolarity fields. The routine
> + also has access to the names for the SPI bus and
> + chip which can be used during debugging.
> + @param[in] ClockHz Pointer to the requested clock frequency. The SPI
> + host controller will choose a supported clock
> + frequency which is less then or equal to this
> + value. Specify zero to turn the clock generator
> + off. The actual clock frequency supported by the
> + SPI host controller will be returned.
> +
> + @retval EFI_SUCCESS The clock was set up successfully
> + @retval EFI_UNSUPPORTED The SPI controller was not able to support the
> + frequency requested by ClockHz
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +Clock (
> + IN CONST EFI_SPI_HC_PROTOCOL *This,
> + IN CONST EFI_SPI_PERIPHERAL *SpiPeripheral,
> + IN UINT32 *ClockHz
> + )
> +{
> + return PlatformSpiHcClock (This, SpiPeripheral, ClockHz);
> +}
> +
> +/**
> + Perform the SPI transaction on the SPI peripheral using the SPI host
> + controller.
> +
> + This routine is called at TPL_NOTIFY.
> + This routine synchronously returns EFI_SUCCESS indicating that the
> + asynchronous SPI transaction was started. The routine then waits for
> + completion of the SPI transaction prior to returning the final transaction
> + status.
> +
> + @param[in] This Pointer to an EFI_SPI_HC_PROTOCOL structure.
> + @param[in] BusTransaction Pointer to a EFI_SPI_BUS_ TRANSACTION
> containing
> + the description of the SPI transaction to perform.
> +
> + @retval EFI_SUCCESS The transaction completed successfully
> + @retval EFI_BAD_BUFFER_SIZE The BusTransaction->WriteBytes value is
> invalid,
> + or the BusTransaction->ReadinBytes value is
> + invalid
> + @retval EFI_UNSUPPORTED The BusTransaction-> Transaction Type is
> + unsupported
> + @retval EFI_DEVICE_ERROR SPI Host Controller failed transaction
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +Transaction (
> + IN CONST EFI_SPI_HC_PROTOCOL *This,
> + IN EFI_SPI_BUS_TRANSACTION *BusTransaction
> + )
> +{
> + return PlatformSpiHcTransaction (This, BusTransaction);
> +}
> diff --git a/MdeModulePkg/Bus/Spi/SpiHc/SpiHcDxe.c
> b/MdeModulePkg/Bus/Spi/SpiHc/SpiHcDxe.c
> new file mode 100644
> index 000000000000..d0e9827eb67c
> --- /dev/null
> +++ b/MdeModulePkg/Bus/Spi/SpiHc/SpiHcDxe.c
> @@ -0,0 +1,101 @@
> +/** @file
> +
> + SPI Host controller entry point for DXE
> +
> + Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +#include <Base.h>
> +#include <Library/BaseLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/PcdLib.h>
> +#include <Library/UefiLib.h>
> +#include <Library/MemoryAllocationLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Library/UefiRuntimeServicesTableLib.h>
> +#include <Library/SpiHcPlatformLib.h>
> +#include <Protocol/SpiHc.h>
> +#include <IndustryStandard/SpiNorFlashJedecSfdp.h>
> +#include "SpiHc.h"
> +
> +EFI_HANDLE mSpiHcHandle = 0;
> +
> +/**
> + Entry point of the SPI Host Controller driver. Installs the
> EFI_SPI_HC_PROTOCOL on mSpiHcHandle.
> + Also installs the EFI_DEVICE_PATH_PROTOCOL corresponding to the SPI
> Host controller on the same
> + mSpiHcHandle.
> +
> + @param[in] ImageHandle Image handle of this driver.
> + @param[in] SystemTable Pointer to standard EFI system table.
> +
> + @retval EFI_SUCCESS Succeed.
> + @retval EFI_OUT_RESOURCES If the system has run out of memory
> +**/
> +EFI_STATUS
> +EFIAPI
> +SpiHcProtocolEntry (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE *SystemTable
> + )
> +{
> + EFI_STATUS Status;
> + EFI_SPI_HC_PROTOCOL *HcProtocol;
> + EFI_DEVICE_PATH_PROTOCOL *HcDevicePath;
> +
> + DEBUG ((DEBUG_VERBOSE, "%a - ENTRY\n", __func__));
> +
> + // Allocate the SPI Host Controller protocol
> + HcProtocol = AllocateZeroPool (sizeof (EFI_SPI_HC_PROTOCOL));
> + ASSERT (HcProtocol != NULL);
> + if (HcProtocol == NULL) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + // Fill in the SPI Host Controller Protocol
> + Status = GetPlatformSpiHcDetails (
> + &HcProtocol->Attributes,
> + &HcProtocol->FrameSizeSupportMask,
> + &HcProtocol->MaximumTransferBytes
> + );
> +
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_VERBOSE, "Error, no Platform SPI HC details\n"));
> + return Status;
> + }
> +
> + HcProtocol->ChipSelect = ChipSelect;
> + HcProtocol->Clock = Clock;
> + HcProtocol->Transaction = Transaction;
> +
> + // Install Host Controller protocol
> + Status = gBS->InstallProtocolInterface (
> + &mSpiHcHandle,
> + &gEfiSpiHcProtocolGuid,
> + EFI_NATIVE_INTERFACE,
> + HcProtocol
> + );
> +
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_VERBOSE, "Error installing gEfiSpiHcProtocolGuid\n"));
> + return Status;
> + }
> +
> + Status = GetSpiHcDevicePath (&HcDevicePath);
> +
> + // Install HC device path here on this handle as well
> + Status = gBS->InstallProtocolInterface (
> + &mSpiHcHandle,
> + &gEfiDevicePathProtocolGuid,
> + EFI_NATIVE_INTERFACE,
> + HcDevicePath
> + );
> +
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_VERBOSE, "Error installing
> gEfiDevicePathProtocolGuid\n"));
> + }
> +
> + DEBUG ((DEBUG_VERBOSE, "%a - EXIT Status=%r\n", __func__, Status));
> +
> + return Status;
> +}
> diff --git a/MdeModulePkg/Bus/Spi/SpiHc/SpiHcSmm.c
> b/MdeModulePkg/Bus/Spi/SpiHc/SpiHcSmm.c
> new file mode 100644
> index 000000000000..adebff97631a
> --- /dev/null
> +++ b/MdeModulePkg/Bus/Spi/SpiHc/SpiHcSmm.c
> @@ -0,0 +1,79 @@
> +/** @file
> +
> + SPI Host controller entry point for SMM
> +
> + Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
> + SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +#include <Base.h>
> +#include <Library/BaseLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/PcdLib.h>
> +#include <Library/UefiLib.h>
> +#include <Library/MemoryAllocationLib.h>
> +#include <Library/MmServicesTableLib.h>
> +#include <Library/UefiRuntimeServicesTableLib.h>
> +#include <Library/SpiHcPlatformLib.h>
> +#include <Protocol/SpiSmmHc.h>
> +#include <IndustryStandard/SpiNorFlashJedecSfdp.h>
> +#include "SpiHc.h"
> +
> +EFI_HANDLE mSpiHcHandle = 0;
> +
> +/**
> + Entry point of the SPI Host Controller driver. Installs the
> EFI_SPI_HC_PROTOCOL on mSpiHcHandle.
> + Also installs the EFI_DEVICE_PATH_PROTOCOL corresponding to the SPI
> Host controller on the same
> + mSpiHcHandle.
> +
> + @param[in] ImageHandle Image handle of this driver.
> + @param[in] SystemTable Pointer to standard EFI system table.
> +
> + @retval EFI_SUCCESS Succeed.
> + @retval EFI_OUT_RESOURCES If the system has run out of memory
> +**/
> +EFI_STATUS
> +EFIAPI
> +SpiHcProtocolEntry (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE *SystemTable
> + )
> +{
> + EFI_STATUS Status;
> + EFI_SPI_HC_PROTOCOL *HcProtocol;
> +
> + DEBUG ((DEBUG_VERBOSE, "%a - ENTRY\n", __func__));
> +
> + // Allocate the SPI Host Controller protocol
> + HcProtocol = AllocateZeroPool (sizeof (EFI_SPI_HC_PROTOCOL));
> + ASSERT (HcProtocol != NULL);
> + if (HcProtocol == NULL) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + // Fill in the SPI Host Controller Protocol
> + Status = GetPlatformSpiHcDetails (
> + &HcProtocol->Attributes,
> + &HcProtocol->FrameSizeSupportMask,
> + &HcProtocol->MaximumTransferBytes
> + );
> +
> + HcProtocol->ChipSelect = ChipSelect;
> + HcProtocol->Clock = Clock;
> + HcProtocol->Transaction = Transaction;
> +
> + Status = gMmst->MmInstallProtocolInterface (
> + &mSpiHcHandle,
> + &gEfiSpiSmmHcProtocolGuid,
> + EFI_NATIVE_INTERFACE,
> + HcProtocol
> + );
> +
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_VERBOSE, "Error installing
> gEfiSpiSmmHcProtocolGuid\n"));
> + }
> +
> + DEBUG ((DEBUG_VERBOSE, "%a - EXIT Status=%r\n", __func__, Status));
> +
> + return Status;
> +}
> diff --git a/MdeModulePkg/Bus/Spi/SpiHc/SpiHc.uni
> b/MdeModulePkg/Bus/Spi/SpiHc/SpiHc.uni
> new file mode 100644
> index 000000000000..9fab0a7433c5
> --- /dev/null
> +++ b/MdeModulePkg/Bus/Spi/SpiHc/SpiHc.uni
> @@ -0,0 +1,10 @@
> +// /** @file
> +//
> +// Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
> +//
> +// SPDX-License-Identifier: BSD-2-Clause-Patent
> +//
> +// **/
> +
> +#string STR_PROPERTIES_MODULE_NAME
> +#language en-US "SPI host controller driver"
> --
> 2.42.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#118496): https://edk2.groups.io/g/devel/message/118496
Mute This Topic: https://groups.io/mt/105849138/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2024-05-02 4:25 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-01 19:05 [edk2-devel] [PATCH v1 0/6] SPI Driver Stack Chesley, Brit via groups.io
2024-05-01 19:05 ` [edk2-devel] [PATCH v1 1/6] MdePkg/SpiConfiguration: Correct the definition spelling Chesley, Brit via groups.io
2024-05-02 4:20 ` Chang, Abner via groups.io
2024-05-01 19:05 ` [edk2-devel] [PATCH v1 2/6] MdeModulePkg/Bus/Spi/SpiBus: Adding SpiBus Drivers Chesley, Brit via groups.io
2024-05-02 4:24 ` Chang, Abner via groups.io
2024-05-01 19:05 ` [edk2-devel] [PATCH v1 3/6] MdeModulePkg: " Chesley, Brit via groups.io
2024-05-02 4:24 ` Chang, Abner via groups.io
2024-05-06 11:08 ` Chang, Abner via groups.io
2024-05-07 2:50 ` [edk2-devel] 回复: " gaoliming via groups.io
2024-05-01 19:05 ` [edk2-devel] [PATCH v1 4/6] MdeModulePkg:BaseSpiHcPlatformLib: Adding NULL lib instance Chesley, Brit via groups.io
2024-05-02 4:25 ` Chang, Abner via groups.io
2024-05-06 11:08 ` Chang, Abner via groups.io
2024-05-07 2:50 ` [edk2-devel] 回复: " gaoliming via groups.io
2024-05-01 19:05 ` [edk2-devel] [PATCH v1 5/6] MdeModulePkg: SpiHc: SpiHc Drivers Chesley, Brit via groups.io
2024-05-02 4:25 ` Chang, Abner via groups.io [this message]
2024-05-01 19:05 ` [edk2-devel] [PATCH v1 6/6] MdeModulePkg: Adding " Chesley, Brit via groups.io
2024-05-02 4:25 ` Chang, Abner via groups.io
2024-05-06 11:08 ` Chang, Abner via groups.io
2024-05-07 2:51 ` [edk2-devel] 回复: " gaoliming via groups.io
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=LV8PR12MB9452BCE1EC93CB6CBEBA571CEA182@LV8PR12MB9452.namprd12.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox