Re: [edk2-devel] [PATCH v1 4/6] MdeModulePkg:BaseSpiHcPlatformLib: Adding NULL lib instance

["Chang, Abner via groups.io" <abner.chang=amd.com@groups.io>]

[AMD Official Use Only - General]

Acked-by: Abner Chang <abner.chang@amd.com>

> -----Original Message-----
> From: Chesley, Brit <Brit.Chesley@amd.com>
> Sent: Thursday, May 2, 2024 3:05 AM
> To: devel@edk2.groups.io
> Cc: Liming Gao <gaoliming@byosoft.com.cn>; Ray Ni <ray.ni@intel.com>;
> Chang, Abner <Abner.Chang@amd.com>; Attar, AbdulLateef (Abdul Lateef)
> <AbdulLateef.Attar@amd.com>
> Subject: [PATCH v1 4/6] MdeModulePkg:BaseSpiHcPlatformLib: Adding NULL
> lib instance
>
> From: Brit Chesley <brit.chesley@amd.com>
>
> Adding NULL SpiHcPlatformLib instance. This library is responsible for
> handling the low level details of the SPI host controller. Since this is
> platform specific this library will be dependent on OEM SPI
> implementation. The SPI host controller layer will utilize this library
> for SPI bus transactions.
>
> Bugzilla #4753
>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Ray Ni <ray.ni@intel.com>
> Cc: Abner Chang <abner.chang@amd.com>
> Cc: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
> Signed-off-by: Brit Chesley <brit.chesley@amd.com>
> ---
>  MdeModulePkg/MdeModulePkg.dec                 |   5 +
>  MdeModulePkg/MdeModulePkg.dsc                 |   2 +
>  .../BaseSpiHcPlatformLibNull.inf              |  33 ++++
>  .../Include/Library/SpiHcPlatformLib.h        | 148 ++++++++++++++++++
>  .../BaseSpiHcPlatformLibNull.c                | 145 +++++++++++++++++
>  .../BaseSpiHcPlatformLibNull.uni              |  11 ++
>  6 files changed, 344 insertions(+)
>  create mode 100644
> MdeModulePkg/Library/BaseSpiHcPlatformLibNull/BaseSpiHcPlatformLibNull.
> inf
>  create mode 100644 MdeModulePkg/Include/Library/SpiHcPlatformLib.h
>  create mode 100644
> MdeModulePkg/Library/BaseSpiHcPlatformLibNull/BaseSpiHcPlatformLibNull.
> c
>  create mode 100644
> MdeModulePkg/Library/BaseSpiHcPlatformLibNull/BaseSpiHcPlatformLibNull.
> uni
>
> diff --git a/MdeModulePkg/MdeModulePkg.dec
> b/MdeModulePkg/MdeModulePkg.dec
> index 085370eae41a..8a3bcb9aded1 100644
> --- a/MdeModulePkg/MdeModulePkg.dec
> +++ b/MdeModulePkg/MdeModulePkg.dec
> @@ -169,6 +169,11 @@ [LibraryClasses]
>    #
>    ImagePropertiesRecordLib|Include/Library/ImagePropertiesRecordLib.h
>
> +  ##  @libraryclass   Platform SPI Host Controller library which provides low-
> level
> +  #                   control over the SPI hardware
> +  #
> +  SpiHcPlatformLib|Include/Library/SpiHcPlatformLib.h
> +
>  [Guids]
>    ## MdeModule package token space guid
>    # Include/Guid/MdeModulePkgTokenSpace.h
> diff --git a/MdeModulePkg/MdeModulePkg.dsc
> b/MdeModulePkg/MdeModulePkg.dsc
> index 33d6f4a1f6a6..177128bdfd3e 100644
> --- a/MdeModulePkg/MdeModulePkg.dsc
> +++ b/MdeModulePkg/MdeModulePkg.dsc
> @@ -107,6 +107,7 @@ [LibraryClasses]
>
> MmUnblockMemoryLib|MdePkg/Library/MmUnblockMemoryLib/MmUnblo
> ckMemoryLibNull.inf
>
> VariableFlashInfoLib|MdeModulePkg/Library/BaseVariableFlashInfoLib/BaseV
> ariableFlashInfoLib.inf
>
> IpmiCommandLib|MdeModulePkg/Library/BaseIpmiCommandLibNull/BaseIp
> miCommandLibNull.inf
> +
> SpiHcPlatformLib|MdeModulePkg/Library/BaseSpiHcPlatformLibNull/BaseSpi
> HcPlatformLibNull.inf
>
>  [LibraryClasses.EBC.PEIM]
>    IoLib|MdePkg/Library/PeiIoLibCpuIo/PeiIoLibCpuIo.inf
> @@ -528,6 +529,7 @@ [Components.IA32, Components.X64]
>
> MdeModulePkg/Library/TraceHubDebugSysTLib/BaseTraceHubDebugSysTLib.i
> nf
>
> MdeModulePkg/Library/TraceHubDebugSysTLib/PeiTraceHubDebugSysTLib.in
> f
>
> MdeModulePkg/Library/TraceHubDebugSysTLib/DxeSmmTraceHubDebugSys
> TLib.inf
> +
> MdeModulePkg/Library/BaseSpiHcPlatformLibNull/BaseSpiHcPlatformLibNull.
> inf
>
>  [Components.X64]
>    MdeModulePkg/Universal/CapsulePei/CapsuleX64.inf
> diff --git
> a/MdeModulePkg/Library/BaseSpiHcPlatformLibNull/BaseSpiHcPlatformLibN
> ull.inf
> b/MdeModulePkg/Library/BaseSpiHcPlatformLibNull/BaseSpiHcPlatformLibN
> ull.inf
> new file mode 100644
> index 000000000000..805f50b89565
> --- /dev/null
> +++
> b/MdeModulePkg/Library/BaseSpiHcPlatformLibNull/BaseSpiHcPlatformLibN
> ull.inf
> @@ -0,0 +1,33 @@
> +## @file
> +#  NULL library for platform SPI Host controller, which should be provided
> +#  by the OEM.
> +#
> +#  Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
> +#
> +#  SPDX-License-Identifier: BSD-2-Clause-Patent
> +##
> +[Defines]
> +  INF_VERSION               = 1.27
> +  BASE_NAME                 = BaseSpiHcPlatformLibNull
> +  FILE_GUID                 = 3C230948-6DF5-4802-8177-967A190579CF
> +  MODULE_TYPE               = BASE
> +  VERSION_STRING            = 0.1
> +  PI_SPECIFICATION_VERSION  = 0x0001000A
> +  LIBRARY_CLASS             = SpiHcPlatformLib
> +
> +[Packages]
> +  MdePkg/MdePkg.dec
> +  MdeModulePkg/MdeModulePkg.dec
> +
> +[LibraryClasses]
> +  DevicePathLib
> +  UefiLib
> +
> +[Sources]
> +  BaseSpiHcPlatformLibNull.c
> +
> +[Depex]
> +  TRUE
> +
> +[UserExtensions.TianoCore."ExtraFiles"]
> +  BaseSpiHcPlatformLibNull.uni
> diff --git a/MdeModulePkg/Include/Library/SpiHcPlatformLib.h
> b/MdeModulePkg/Include/Library/SpiHcPlatformLib.h
> new file mode 100644
> index 000000000000..c68f7455372c
> --- /dev/null
> +++ b/MdeModulePkg/Include/Library/SpiHcPlatformLib.h
> @@ -0,0 +1,148 @@
> +/** @file
> +
> +  Function declarations for SpiHcPlatformLib
> +
> +  Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
> +  SPDX-License-Identifier: BSD-2-Clause-Patent
> +**/
> +
> +#ifndef PLATFORM_SPI_HC_H_
> +#define PLATFORM_SPI_HC_H_
> +
> +#include <Uefi/UefiBaseType.h>
> +#include <Protocol/SpiHc.h>
> +#include <Protocol/SpiConfiguration.h>
> +#include <Protocol/DevicePath.h>
> +#include <Library/DevicePathLib.h>
> +
> +/**
> +  This function reports the details of the SPI Host Controller to the SpiHc
> driver.
> +
> +  @param[out]     Attributes              The suported attributes of the SPI host
> controller
> +  @param[out]     FrameSizeSupportMask    The suported
> FrameSizeSupportMask of the SPI host controller
> +  @param[out]     MaximumTransferBytes    The suported
> MaximumTransferBytes of the SPI host controller
> +
> +  @retval EFI_SUCCESS             SPI_HOST_CONTROLLER_INSTANCE was
> allocated properly
> +  @retval EFI_OUT_OF_RESOURCES    The SPI_HOST_CONTROLLER_INSTANCE
> could not be allocated
> +*/
> +EFI_STATUS
> +EFIAPI
> +GetPlatformSpiHcDetails (
> +  OUT     UINT32  *Attributes,
> +  OUT     UINT32  *FrameSizeSupportMask,
> +  OUT     UINT32  *MaximumTransferBytes
> +  );
> +
> +/**
> +  This function reports the device path of SPI host controller. This is needed in
> order for the SpiBus
> +  to match the correct SPI_BUS to the SPI host controller
> +
> +  @param[out] DevicePath The device path for this SPI HC is returned in this
> variable
> +
> +  @retval EFI_SUCCESS
> +*/
> +EFI_STATUS
> +EFIAPI
> +GetSpiHcDevicePath (
> +  OUT EFI_DEVICE_PATH_PROTOCOL  **DevicePath
> +  );
> +
> +/**
> +  This is the platform specific Spi Chip select function.
> +  Assert or deassert the SPI chip select.
> +
> +  This routine is called at TPL_NOTIFY.
> +  Update the value of the chip select line for a SPI peripheral. The SPI bus
> +  layer calls this routine either in the board layer or in the SPI controller
> +  to manipulate the chip select pin at the start and end of a SPI transaction.
> +
> +  @param[in] This           Pointer to an EFI_SPI_HC_PROTOCOL structure.
> +  @param[in] SpiPeripheral  The address of an EFI_SPI_PERIPHERAL data
> structure
> +                            describing the SPI peripheral whose chip select pin
> +                            is to be manipulated. The routine may access the
> +                            ChipSelectParameter field to gain sufficient
> +                            context to complete the operati on.
> +  @param[in] PinValue       The value to be applied to the chip select line of
> +                            the SPI peripheral.
> +
> +  @retval EFI_SUCCESS            The chip select was set as requested
> +  @retval EFI_NOT_READY          Support for the chip select is not properly
> +                                 initialized
> +  @retval EFI_INVALID_PARAMETER  The ChipSeLect value or its contents are
> +                                 invalid
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +PlatformSpiHcChipSelect (
> +  IN CONST EFI_SPI_HC_PROTOCOL  *This,
> +  IN CONST EFI_SPI_PERIPHERAL   *SpiPeripheral,
> +  IN BOOLEAN                    PinValue
> +  );
> +
> +/**
> +  This function is the platform specific SPI clock function.
> +  Set up the clock generator to produce the correct clock frequency, phase
> and
> +  polarity for a SPI chip.
> +
> +  This routine is called at TPL_NOTIFY.
> +  This routine updates the clock generator to generate the correct frequency
> +  and polarity for the SPI clock.
> +
> +  @param[in] This           Pointer to an EFI_SPI_HC_PROTOCOL structure.
> +  @param[in] SpiPeripheral  Pointer to a EFI_SPI_PERIPHERAL data structure
> from
> +                            which the routine can access the ClockParameter,
> +                            ClockPhase and ClockPolarity fields. The routine
> +                            also has access to the names for the SPI bus and
> +                            chip which can be used during debugging.
> +  @param[in] ClockHz        Pointer to the requested clock frequency. The SPI
> +                            host controller will choose a supported clock
> +                            frequency which is less then or equal to this
> +                            value. Specify zero to turn the clock generator
> +                            off. The actual clock frequency supported by the
> +                            SPI host controller will be returned.
> +
> +  @retval EFI_SUCCESS      The clock was set up successfully
> +  @retval EFI_UNSUPPORTED  The SPI controller was not able to support the
> +                           frequency requested by ClockHz
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +PlatformSpiHcClock (
> +  IN CONST EFI_SPI_HC_PROTOCOL  *This,
> +  IN CONST EFI_SPI_PERIPHERAL   *SpiPeripheral,
> +  IN UINT32                     *ClockHz
> +  );
> +
> +/**
> +  This function is the platform specific SPI transaction function
> +  Perform the SPI transaction on the SPI peripheral using the SPI host
> +  controller.
> +
> +  This routine is called at TPL_NOTIFY.
> +  This routine synchronously returns EFI_SUCCESS indicating that the
> +  asynchronous SPI transaction was started. The routine then waits for
> +  completion of the SPI transaction prior to returning the final transaction
> +  status.
> +
> +  @param[in] This            Pointer to an EFI_SPI_HC_PROTOCOL structure.
> +  @param[in] BusTransaction  Pointer to a EFI_SPI_BUS_ TRANSACTION
> containing
> +                             the description of the SPI transaction to perform.
> +
> +  @retval EFI_SUCCESS          The transaction completed successfully
> +  @retval EFI_BAD_BUFFER_SIZE  The BusTransaction->WriteBytes value is
> invalid,
> +                               or the BusTransaction->ReadinBytes value is
> +                               invalid
> +  @retval EFI_UNSUPPORTED      The BusTransaction-> Transaction Type is
> +                               unsupported
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +PlatformSpiHcTransaction (
> +  IN CONST EFI_SPI_HC_PROTOCOL  *This,
> +  IN EFI_SPI_BUS_TRANSACTION    *BusTransaction
> +  );
> +
> +#endif // PLATFORM_SPI_HC_SMM_PROTOCOL_H_
> diff --git
> a/MdeModulePkg/Library/BaseSpiHcPlatformLibNull/BaseSpiHcPlatformLibN
> ull.c
> b/MdeModulePkg/Library/BaseSpiHcPlatformLibNull/BaseSpiHcPlatformLibN
> ull.c
> new file mode 100644
> index 000000000000..2926e9e248eb
> --- /dev/null
> +++
> b/MdeModulePkg/Library/BaseSpiHcPlatformLibNull/BaseSpiHcPlatformLibN
> ull.c
> @@ -0,0 +1,145 @@
> +/** @file
> +
> +  Null implementation of SpiHcPlatformLib
> +
> +  Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
> +  SPDX-License-Identifier: BSD-2-Clause-Patent
> +
> +**/
> +#include <PiDxe.h>
> +#include <Protocol/DevicePath.h>
> +#include <Protocol/SpiHc.h>
> +#include <Library/SpiHcPlatformLib.h>
> +
> +/**
> +  This function reports the details of the SPI Host Controller to the SpiHc
> driver.
> +
> +  @param[out]     Attributes              The suported attributes of the SPI host
> controller
> +  @param[out]     FrameSizeSupportMask    The suported
> FrameSizeSupportMask of the SPI host controller
> +  @param[out]     MaximumTransferBytes    The suported
> MaximumTransferBytes of the SPI host controller
> +
> +  @retval EFI_UNSUPPORTED
> +**/
> +EFI_STATUS
> +EFIAPI
> +GetPlatformSpiHcDetails (
> +  OUT     UINT32  *Attributes,
> +  OUT     UINT32  *FrameSizeSupportMask,
> +  OUT     UINT32  *MaximumTransferBytes
> +  )
> +{
> +  return EFI_UNSUPPORTED;
> +}
> +
> +/**
> +  This function reports the device path of SPI host controller. This is needed in
> order for the SpiBus
> +  to match the correct SPI_BUS to the SPI host controller
> +
> +  @param[out] DevicePath The device path for this SPI HC is returned in this
> variable
> +
> +  @retval EFI_UNSUPPORTED
> +**/
> +EFI_STATUS
> +EFIAPI
> +GetSpiHcDevicePath (
> +  OUT EFI_DEVICE_PATH_PROTOCOL  **DevicePath
> +  )
> +{
> +  return EFI_UNSUPPORTED;
> +}
> +
> +/**
> +  This is the platform specific Spi Chip select function.
> +  Assert or deassert the SPI chip select.
> +
> +  This routine is called at TPL_NOTIFY.
> +  Update the value of the chip select line for a SPI peripheral. The SPI bus
> +  layer calls this routine either in the board layer or in the SPI controller
> +  to manipulate the chip select pin at the start and end of a SPI transaction.
> +
> +  @param[in] This           Pointer to an EFI_SPI_HC_PROTOCOL structure.
> +  @param[in] SpiPeripheral  The address of an EFI_SPI_PERIPHERAL data
> structure
> +                            describing the SPI peripheral whose chip select pin
> +                            is to be manipulated. The routine may access the
> +                            ChipSelectParameter field to gain sufficient
> +                            context to complete the operati on.
> +  @param[in] PinValue       The value to be applied to the chip select line of
> +                            the SPI peripheral.
> +
> +  @retval EFI_UNSUPPORTED
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +PlatformSpiHcChipSelect (
> +  IN CONST EFI_SPI_HC_PROTOCOL  *This,
> +  IN CONST EFI_SPI_PERIPHERAL   *SpiPeripheral,
> +  IN BOOLEAN                    PinValue
> +  )
> +{
> +  return EFI_UNSUPPORTED;
> +}
> +
> +/**
> +  This function is the platform specific SPI clock function.
> +  Set up the clock generator to produce the correct clock frequency, phase
> and
> +  polarity for a SPI chip.
> +
> +  This routine is called at TPL_NOTIFY.
> +  This routine updates the clock generator to generate the correct frequency
> +  and polarity for the SPI clock.
> +
> +  @param[in] This           Pointer to an EFI_SPI_HC_PROTOCOL structure.
> +  @param[in] SpiPeripheral  Pointer to a EFI_SPI_PERIPHERAL data structure
> from
> +                            which the routine can access the ClockParameter,
> +                            ClockPhase and ClockPolarity fields. The routine
> +                            also has access to the names for the SPI bus and
> +                            chip which can be used during debugging.
> +  @param[in] ClockHz        Pointer to the requested clock frequency. The SPI
> +                            host controller will choose a supported clock
> +                            frequency which is less then or equal to this
> +                            value. Specify zero to turn the clock generator
> +                            off. The actual clock frequency supported by the
> +                            SPI host controller will be returned.
> +
> +  @retval EFI_UNSUPPORTED
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +PlatformSpiHcClock (
> +  IN CONST EFI_SPI_HC_PROTOCOL  *This,
> +  IN CONST EFI_SPI_PERIPHERAL   *SpiPeripheral,
> +  IN UINT32                     *ClockHz
> +  )
> +{
> +  return EFI_UNSUPPORTED;
> +}
> +
> +/**
> +  This function is the platform specific SPI transaction function
> +  Perform the SPI transaction on the SPI peripheral using the SPI host
> +  controller.
> +
> +  This routine is called at TPL_NOTIFY.
> +  This routine synchronously returns EFI_SUCCESS indicating that the
> +  asynchronous SPI transaction was started. The routine then waits for
> +  completion of the SPI transaction prior to returning the final transaction
> +  status.
> +
> +  @param[in] This            Pointer to an EFI_SPI_HC_PROTOCOL structure.
> +  @param[in] BusTransaction  Pointer to a EFI_SPI_BUS_ TRANSACTION
> containing
> +                             the description of the SPI transaction to perform.
> +
> +  @retval EFI_UNSUPPORTED
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +PlatformSpiHcTransaction (
> +  IN CONST EFI_SPI_HC_PROTOCOL  *This,
> +  IN EFI_SPI_BUS_TRANSACTION    *BusTransaction
> +  )
> +{
> +  return EFI_UNSUPPORTED;
> +}
> diff --git
> a/MdeModulePkg/Library/BaseSpiHcPlatformLibNull/BaseSpiHcPlatformLibN
> ull.uni
> b/MdeModulePkg/Library/BaseSpiHcPlatformLibNull/BaseSpiHcPlatformLibN
> ull.uni
> new file mode 100644
> index 000000000000..82fa02c31d58
> --- /dev/null
> +++
> b/MdeModulePkg/Library/BaseSpiHcPlatformLibNull/BaseSpiHcPlatformLibN
> ull.uni
> @@ -0,0 +1,11 @@
> +
> +// /** @file
> +//
> +// Copyright (C) 2024 Advanced Micro Devices, Inc. All rights reserved.<BR>
> +//
> +// SPDX-License-Identifier: BSD-2-Clause-Patent
> +//
> +// **/
> +
> +#string STR_PROPERTIES_MODULE_NAME
> +#language en-US   "Null SPI Host controller library"
> --
> 2.42.1



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#118495): https://edk2.groups.io/g/devel/message/118495
Mute This Topic: https://groups.io/mt/105849133/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-