From: "Michael D Kinney" <michael.d.kinney@intel.com>
To: "Wang, Jian J" <jian.j.wang@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>,
"Tan, Ming" <ming.tan@intel.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>
Cc: "Wu, Hao A" <hao.a.wu@intel.com>
Subject: Re: [edk2-devel] [PATCH v5 1/1] MdeModulePkg.dec: Change PCDs for status code.
Date: Thu, 18 Jun 2020 01:46:46 +0000 [thread overview]
Message-ID: <MN2PR11MB4461E154CABEDEE301E6E464D29B0@MN2PR11MB4461.namprd11.prod.outlook.com> (raw)
In-Reply-To: <SN6PR11MB3312015358EC4478BE8893BEB69B0@SN6PR11MB3312.namprd11.prod.outlook.com>
Jian,
There are few rules listed in the EDK II DEC File Format
Specification that apply here:
https://edk2-docs.gitbook.io/edk-ii-dec-specification/3_edk_ii_dec_file_format/310_pcd_sections
* PCD entries may be put into any or all PCD section types
except PcdsFeatureFlag sections.
* PCDs listed in PcdsFeatureFlag sections must only be listed
in PcdsFeatureFlag sections.
* The PcdsFeatureFlag PcdType may not be mixed with any
other PcdType elements in the section header. The following
example is NOT VALID:
[PcdsFeatureFlag.IA32, PcdsFixedAtBuild.IA32]
Best regards,
Mike
> -----Original Message-----
> From: Wang, Jian J <jian.j.wang@intel.com>
> Sent: Wednesday, June 17, 2020 5:58 PM
> To: Kinney, Michael D <michael.d.kinney@intel.com>;
> devel@edk2.groups.io; Tan, Ming <ming.tan@intel.com>
> Cc: Wu, Hao A <hao.a.wu@intel.com>
> Subject: RE: [edk2-devel] [PATCH v5 1/1]
> MdeModulePkg.dec: Change PCDs for status code.
>
> Mike,
>
> I tried to build it. There's no warnings. And it's free
> to change type to any of them.
> Why's there such limitation? FeatureFlag looks the same
> as FixedAtBuild to me.
>
> Regards,
> Jian
>
> > -----Original Message-----
> > From: Kinney, Michael D <michael.d.kinney@intel.com>
> > Sent: Thursday, June 18, 2020 12:47 AM
> > To: devel@edk2.groups.io; Wang, Jian J
> <jian.j.wang@intel.com>; Tan, Ming
> > <ming.tan@intel.com>; Kinney, Michael D
> <michael.d.kinney@intel.com>
> > Cc: Wu, Hao A <hao.a.wu@intel.com>
> > Subject: RE: [edk2-devel] [PATCH v5 1/1]
> MdeModulePkg.dec: Change PCDs for
> > status code.
> >
> > Ming,
> >
> > With this change, are the same PCDs listed as both
> > a Feature Flag PCD and a non-Feature Flag PCD?
> >
> > That should not be allowed, and if that passes the
> > build, then the build tools should flag that as an
> > error condition.
> >
> > Mike
> >
> > > -----Original Message-----
> > > From: devel@edk2.groups.io <devel@edk2.groups.io> On
> > > Behalf Of Wang, Jian J
> > > Sent: Wednesday, June 17, 2020 7:43 AM
> > > To: Tan, Ming <ming.tan@intel.com>;
> devel@edk2.groups.io
> > > Cc: Wu, Hao A <hao.a.wu@intel.com>
> > > Subject: Re: [edk2-devel] [PATCH v5 1/1]
> > > MdeModulePkg.dec: Change PCDs for status code.
> > >
> > > Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
> > >
> > > Regards,
> > > Jian
> > >
> > > > -----Original Message-----
> > > > From: Tan, Ming <ming.tan@intel.com>
> > > > Sent: Wednesday, June 17, 2020 3:36 PM
> > > > To: devel@edk2.groups.io
> > > > Cc: Wang, Jian J <jian.j.wang@intel.com>; Wu, Hao
> A
> > > <hao.a.wu@intel.com>
> > > > Subject: [PATCH v5 1/1] MdeModulePkg.dec: Change
> PCDs
> > > for status code.
> > > >
> > > > REF:
> > > https://bugzilla.tianocore.org/show_bug.cgi?id=2786
> > > >
> > > > In order to support enable/disable report status
> code
> > > through memory
> > > > or serial dynamic, change the following PCDs from
> > > [PcdsFeatureFlag] to
> > > > [PcdsFixedAtBuild, PcdsPatchableInModule,
> PcdsDynamic,
> > > PcdsDynamicEx]:
> > > > PcdStatusCodeUseSerial
> > > > PcdStatusCodeUseMemory
> > > > The original plaforms can use PcdsFixedAtBuild in
> .dsc
> > > files to save size.
> > > > Currently do not remove the old pcd type to keep
> > > compatible.
> > > >
> > > > Cc: Jian J Wang <jian.j.wang@intel.com>
> > > > Cc: Hao A Wu <hao.a.wu@intel.com>
> > > > Signed-off-by: Ming Tan <ming.tan@intel.com>
> > > > ---
> > > > V5: Do not remove th old pcd type to keep
> compatible,
> > > and change to
> > > > standalone patch.
> > > > V4: No change for this 1/4 patch, just modify the
> 2-
> > > 4/4 patchs.
> > > > V3: Split one patch to several patchs, each Pkg
> has
> > > one patch.
> > > > V2: Change the new type from [PcdsDynamic] to
> > > [PcdsFixedAtBuild,
> > > > PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
> > > > And set to PcdsFixedAtBuild in the original
> > > platform .dsc files.
> > > >
> > > > MdeModulePkg/MdeModulePkg.dec
> | 13
> > > +++++++++++++
> > > > .../StatusCodeHandler/Pei/StatusCodeHandlerPei.c
> | 6
> > > +++---
> > > > .../Pei/StatusCodeHandlerPei.inf
> | 6
> > > ++----
> > > > .../RuntimeDxe/StatusCodeHandlerRuntimeDxe.c
> | 16
> > > ++++++++--------
> > > > .../RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
> | 6
> > > ++----
> > > > .../StatusCodeHandler/Smm/StatusCodeHandlerSmm.c
> | 10
> > > +++++-----
> > > > .../Smm/StatusCodeHandlerSmm.inf
> | 6
> > > ++----
> > > > 7 files changed, 35 insertions(+), 28 deletions(-
> )
> > > >
> > > > diff --git a/MdeModulePkg/MdeModulePkg.dec
> > > > b/MdeModulePkg/MdeModulePkg.dec
> > > > index 4f44af694862..bd369d1f230e 100644
> > > > --- a/MdeModulePkg/MdeModulePkg.dec
> > > > +++ b/MdeModulePkg/MdeModulePkg.dec
> > > > @@ -2001,6 +2001,19 @@ [PcdsFixedAtBuild,
> > > PcdsPatchableInModule,
> > > > PcdsDynamic, PcdsDynamicEx]
> > > > # @Prompt TCG Platform Firmware Profile
> revision.
> > > >
> > > >
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdTcgPfpMeasurementRevis
> > > ion|0|UINT3
> > > > 2|0x00010077
> > > >
> > > > + ## Indicates if StatusCode is reported via
> Serial
> > > port.<BR><BR>
> > > > + # TRUE - Reports StatusCode via Serial
> port.<BR>
> > > > + # FALSE - Does not report StatusCode via
> Serial
> > > port.<BR>
> > > > + # @Prompt Enable StatusCode via Serial port.
> > > > +
> > > >
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TR
> > > UE|BOOLEAN|
> > > > 0x00010022
> > > > +
> > > > + ## Indicates if StatusCode is stored in memory.
> > > > + # The memory is boot time memory in PEI Phase
> and
> > > is runtime memory in
> > > > DXE Phase.<BR><BR>
> > > > + # TRUE - Stores StatusCode in memory.<BR>
> > > > + # FALSE - Does not store StatusCode in
> > > memory.<BR>
> > > > + # @Prompt Enable StatusCode via memory.
> > > > +
> > > >
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FA
> > > LSE|BOOLEA
> > > > N|0x00010023
> > > > +
> > > > [PcdsPatchableInModule]
> > > > ## Specify memory size with page number for PEI
> > > code when
> > > > # Loading Module at Fixed Address feature is
> > > enabled.
> > > > diff --git
> > > >
> > >
> a/MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCod
> > > eHandlerPei.c
> > > >
> > >
> b/MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCod
> > > eHandlerPei.c
> > > > index 1b07f92f3ce8..9b2ea4ee84d9 100644
> > > > ---
> > >
> a/MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCod
> > > eHandlerPei.c
> > > > +++
> > > >
> > >
> b/MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCod
> > > eHandlerPei.c
> > > > @@ -2,7 +2,7 @@
> > > > Report Status Code Handler PEIM which produces
> > > general handlers and hook
> > > > them
> > > > onto the PEI status code router.
> > > >
> > > > - Copyright (c) 2009 - 2018, Intel Corporation.
> All
> > > rights reserved.<BR>
> > > > + Copyright (c) 2009 - 2020, Intel Corporation.
> All
> > > rights reserved.<BR>
> > > > SPDX-License-Identifier: BSD-2-Clause-Patent
> > > >
> > > > **/
> > > > @@ -45,13 +45,13 @@ StatusCodeHandlerPeiEntry (
> > > > // If enable UseSerial, then initialize serial
> > > port.
> > > > // if enable UseMemory, then initialize memory
> > > status code worker.
> > > > //
> > > > - if (FeaturePcdGet (PcdStatusCodeUseSerial)) {
> > > > + if (PcdGetBool (PcdStatusCodeUseSerial)) {
> > > > Status = SerialPortInitialize();
> > > > ASSERT_EFI_ERROR (Status);
> > > > Status = RscHandlerPpi->Register
> > > (SerialStatusCodeReportWorker);
> > > > ASSERT_EFI_ERROR (Status);
> > > > }
> > > > - if (FeaturePcdGet (PcdStatusCodeUseMemory)) {
> > > > + if (PcdGetBool (PcdStatusCodeUseMemory)) {
> > > > Status = MemoryStatusCodeInitializeWorker ();
> > > > ASSERT_EFI_ERROR (Status);
> > > > Status = RscHandlerPpi->Register
> > > (MemoryStatusCodeReportWorker);
> > > > diff --git
> > > >
> > >
> a/MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCod
> > > eHandlerPei.inf
> > > >
> > >
> b/MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCod
> > > eHandlerPei.inf
> > > > index 8aef9af34a05..64380ddfaccc 100644
> > > > ---
> > > >
> > >
> a/MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCod
> > > eHandlerPei.inf
> > > > +++
> > > >
> > >
> b/MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCod
> > > eHandlerPei.inf
> > > > @@ -53,11 +53,9 @@ [Guids]
> > > > [Ppis]
> > > > gEfiPeiRscHandlerPpiGuid
> ##
> > > CONSUMES
> > > >
> > > > -[FeaturePcd]
> > > > -
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory ##
> > > > CONSUMES
> > > > -
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial ##
> > > CONSUMES
> > > > -
> > > > [Pcd]
> > > > +
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial ##
> > > CONSUMES
> > > > +
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory ##
> > > > CONSUMES
> > > >
> > > >
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1
> > > |gEfiMdeMod
> > > > ulePkgTokenSpaceGuid.PcdStatusCodeUseMemory ##
> > > > SOMETIMES_CONSUMES
> > > >
> > > > [Depex]
> > > > diff --git
> > > >
> > >
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/St
> > > atusCodeHandl
> > > > erRuntimeDxe.c
> > > >
> > >
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/St
> > > atusCodeHandl
> > > > erRuntimeDxe.c
> > > > index 79cc48fa55a4..a8c0fe5b7149 100644
> > > > ---
> > > >
> > >
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/St
> > > atusCodeHandl
> > > > erRuntimeDxe.c
> > > > +++
> > > >
> > >
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/St
> > > atusCodeHandl
> > > > erRuntimeDxe.c
> > > > @@ -2,7 +2,7 @@
> > > > Status Code Handler Driver which produces
> general
> > > handlers and hook them
> > > > onto the DXE status code router.
> > > >
> > > > - Copyright (c) 2006 - 2019, Intel Corporation.
> All
> > > rights reserved.<BR>
> > > > + Copyright (c) 2006 - 2020, Intel Corporation.
> All
> > > rights reserved.<BR>
> > > > SPDX-License-Identifier: BSD-2-Clause-Patent
> > > >
> > > > **/
> > > > @@ -29,7 +29,7 @@ UnregisterBootTimeHandlers (
> > > > IN VOID *Context
> > > > )
> > > > {
> > > > - if (FeaturePcdGet (PcdStatusCodeUseSerial)) {
> > > > + if (PcdGetBool (PcdStatusCodeUseSerial)) {
> > > > mRscHandlerProtocol->Unregister
> > > (SerialStatusCodeReportWorker);
> > > > }
> > > > }
> > > > @@ -80,14 +80,14 @@ InitializationDispatcherWorker
> (
> > > > // If enable UseSerial, then initialize serial
> > > port.
> > > > // if enable UseRuntimeMemory, then initialize
> > > runtime memory status code
> > > > worker.
> > > > //
> > > > - if (FeaturePcdGet (PcdStatusCodeUseSerial)) {
> > > > + if (PcdGetBool (PcdStatusCodeUseSerial)) {
> > > > //
> > > > // Call Serial Port Lib API to initialize
> serial
> > > port.
> > > > //
> > > > Status = SerialPortInitialize ();
> > > > ASSERT_EFI_ERROR (Status);
> > > > }
> > > > - if (FeaturePcdGet (PcdStatusCodeUseMemory)) {
> > > > + if (PcdGetBool (PcdStatusCodeUseMemory)) {
> > > > Status = RtMemoryStatusCodeInitializeWorker
> ();
> > > > ASSERT_EFI_ERROR (Status);
> > > > }
> > > > @@ -115,7 +115,7 @@ InitializationDispatcherWorker
> (
> > > > //
> > > > // Dispatch records to devices based on
> > > feature flag.
> > > > //
> > > > - if (FeaturePcdGet
> (PcdStatusCodeUseSerial)) {
> > > > + if (PcdGetBool (PcdStatusCodeUseSerial))
> {
> > > > SerialStatusCodeReportWorker (
> > > > Record[Index].CodeType,
> > > > Record[Index].Value,
> > > > @@ -124,7 +124,7 @@ InitializationDispatcherWorker
> (
> > > > NULL
> > > > );
> > > > }
> > > > - if (FeaturePcdGet
> (PcdStatusCodeUseMemory)) {
> > > > + if (PcdGetBool (PcdStatusCodeUseMemory))
> {
> > > > RtMemoryStatusCodeReportWorker (
> > > > Record[Index].CodeType,
> > > > Record[Index].Value,
> > > > @@ -171,10 +171,10 @@
> StatusCodeHandlerRuntimeDxeEntry
> > > (
> > > > //
> > > > InitializationDispatcherWorker ();
> > > >
> > > > - if (FeaturePcdGet (PcdStatusCodeUseSerial)) {
> > > > + if (PcdGetBool (PcdStatusCodeUseSerial)) {
> > > > mRscHandlerProtocol->Register
> > > (SerialStatusCodeReportWorker,
> > > > TPL_HIGH_LEVEL);
> > > > }
> > > > - if (FeaturePcdGet (PcdStatusCodeUseMemory)) {
> > > > + if (PcdGetBool (PcdStatusCodeUseMemory)) {
> > > > mRscHandlerProtocol->Register
> > > (RtMemoryStatusCodeReportWorker,
> > > > TPL_HIGH_LEVEL);
> > > > }
> > > >
> > > > diff --git
> > > >
> > >
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/St
> > > atusCodeHandl
> > > > erRuntimeDxe.inf
> > > >
> > >
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/St
> > > atusCodeHandl
> > > > erRuntimeDxe.inf
> > > > index d74c2a55dcaf..faadfd9578fe 100644
> > > > ---
> > > >
> > >
> a/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/St
> > > atusCodeHandl
> > > > erRuntimeDxe.inf
> > > > +++
> > > >
> > >
> b/MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/St
> > > atusCodeHandl
> > > > erRuntimeDxe.inf
> > > > @@ -58,12 +58,10 @@ [Guids]
> > > > [Protocols]
> > > > gEfiRscHandlerProtocolGuid
> ##
> > > CONSUMES
> > > >
> > > > -[FeaturePcd]
> > > > +[Pcd]
> > > >
> > > gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn
> ##
> > > CONSUMES
> > > > -
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory ##
> > > > CONSUMES
> > > >
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial ##
> > > CONSUMES
> > > > -
> > > > -[Pcd]
> > > > +
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory ##
> > > > CONSUMES
> > > >
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize
> > > |128|
> > > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory
> > > ##
> > > > SOMETIMES_CONSUMES
> > > >
> > > > [Depex]
> > > > diff --git
> > > >
> > >
> a/MdeModulePkg/Universal/StatusCodeHandler/Smm/StatusCod
> > > eHandlerSmm.
> > > > c
> > > >
> > >
> b/MdeModulePkg/Universal/StatusCodeHandler/Smm/StatusCod
> > > eHandlerSmm.
> > > > c
> > > > index f54991ed3f67..20271571ded4 100644
> > > > ---
> > > >
> > >
> a/MdeModulePkg/Universal/StatusCodeHandler/Smm/StatusCod
> > > eHandlerSmm.
> > > > c
> > > > +++
> > > >
> > >
> b/MdeModulePkg/Universal/StatusCodeHandler/Smm/StatusCod
> > > eHandlerSmm.
> > > > c
> > > > @@ -2,7 +2,7 @@
> > > > Status Code Handler Driver which produces
> general
> > > handlers and hook them
> > > > onto the SMM status code router.
> > > >
> > > > - Copyright (c) 2009 - 2018, Intel Corporation.
> All
> > > rights reserved.<BR>
> > > > + Copyright (c) 2009 - 2020, Intel Corporation.
> All
> > > rights reserved.<BR>
> > > > SPDX-License-Identifier: BSD-2-Clause-Patent
> > > >
> > > > **/
> > > > @@ -28,14 +28,14 @@ InitializationDispatcherWorker
> (
> > > > // If enable UseSerial, then initialize serial
> > > port.
> > > > // if enable UseRuntimeMemory, then initialize
> > > runtime memory status code
> > > > worker.
> > > > //
> > > > - if (FeaturePcdGet (PcdStatusCodeUseSerial)) {
> > > > + if (PcdGetBool (PcdStatusCodeUseSerial)) {
> > > > //
> > > > // Call Serial Port Lib API to initialize
> serial
> > > port.
> > > > //
> > > > Status = SerialPortInitialize ();
> > > > ASSERT_EFI_ERROR (Status);
> > > > }
> > > > - if (FeaturePcdGet (PcdStatusCodeUseMemory)) {
> > > > + if (PcdGetBool (PcdStatusCodeUseMemory)) {
> > > > Status = MemoryStatusCodeInitializeWorker ();
> > > > ASSERT_EFI_ERROR (Status);
> > > > }
> > > > @@ -73,10 +73,10 @@ StatusCodeHandlerSmmEntry (
> > > > //
> > > > InitializationDispatcherWorker ();
> > > >
> > > > - if (FeaturePcdGet (PcdStatusCodeUseSerial)) {
> > > > + if (PcdGetBool (PcdStatusCodeUseSerial)) {
> > > > mRscHandlerProtocol->Register
> > > (SerialStatusCodeReportWorker);
> > > > }
> > > > - if (FeaturePcdGet (PcdStatusCodeUseMemory)) {
> > > > + if (PcdGetBool (PcdStatusCodeUseMemory)) {
> > > > mRscHandlerProtocol->Register
> > > (MemoryStatusCodeReportWorker);
> > > > }
> > > >
> > > > diff --git
> > > >
> > >
> a/MdeModulePkg/Universal/StatusCodeHandler/Smm/StatusCod
> > > eHandlerSmm.i
> > > > nf
> > > >
> > >
> b/MdeModulePkg/Universal/StatusCodeHandler/Smm/StatusCod
> > > eHandlerSmm.i
> > > > nf
> > > > index 47d0545f9591..4e24d87e55d1 100644
> > > > ---
> > > >
> > >
> a/MdeModulePkg/Universal/StatusCodeHandler/Smm/StatusCod
> > > eHandlerSmm.i
> > > > nf
> > > > +++
> > > >
> > >
> b/MdeModulePkg/Universal/StatusCodeHandler/Smm/StatusCod
> > > eHandlerSmm.i
> > > > nf
> > > > @@ -53,11 +53,9 @@ [Guids]
> > > > [Protocols]
> > > > gEfiSmmRscHandlerProtocolGuid
> ##
> > > CONSUMES
> > > >
> > > > -[FeaturePcd]
> > > > -
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory ##
> > > > CONSUMES
> > > > -
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial ##
> > > CONSUMES
> > > > -
> > > > [Pcd]
> > > > +
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial ##
> > > CONSUMES
> > > > +
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory ##
> > > > CONSUMES
> > > >
> > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize
> > > |128|
> > > >
> gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory
> > > ##
> > > > SOMETIMES_CONSUMES
> > > >
> > > > [Depex]
> > > > --
> > > > 2.24.0.windows.2
> > >
> > >
> > >
next prev parent reply other threads:[~2020-06-18 1:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-17 7:35 [PATCH v5 1/1] MdeModulePkg.dec: Change PCDs for status code Tan, Ming
2020-06-17 14:42 ` Wang, Jian J
2020-06-17 16:47 ` [edk2-devel] " Michael D Kinney
2020-06-18 0:40 ` Tan, Ming
2020-06-18 0:57 ` Wang, Jian J
2020-06-18 1:46 ` Michael D Kinney [this message]
2020-06-18 2:25 ` Wang, Jian J
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MN2PR11MB4461E154CABEDEE301E6E464D29B0@MN2PR11MB4461.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox