From: "Chang, Abner" <abner.chang@amd.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"mike.maslenkin@gmail.com" <mike.maslenkin@gmail.com>,
"ray.ni@intel.com" <ray.ni@intel.com>
Subject: Re: [edk2-devel] [PATCH] UefiCpuPkg: Calculate DisplayFamily correctly
Date: Mon, 6 Mar 2023 15:28:27 +0000 [thread overview]
Message-ID: <MN2PR12MB396661959B184D5FABF0B17CEAB69@MN2PR12MB3966.namprd12.prod.outlook.com> (raw)
In-Reply-To: <CAL77WPApNKpTuk5BotOm-_8YeQL2yxKAfG0XaNWZPiZqJD9boQ@mail.gmail.com>
[AMD Official Use Only - General]
We don’t have that pseudo code in AMD APM, so either way is ok.
Acked-by: Abner Chang <abner.chang@amd.com>
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Mike
> Maslenkin via groups.io
> Sent: Monday, March 6, 2023 9:37 PM
> To: devel@edk2.groups.io; ray.ni@intel.com
> Subject: Re: [edk2-devel] [PATCH] UefiCpuPkg: Calculate DisplayFamily
> correctly
>
> Caution: This message originated from an External Source. Use proper
> caution when opening attachments, clicking links, or responding.
>
>
> There is no problem with current implementation.
> My proposal was to re-write code in this way:
>
> DisplayModel = Eax.Bits.Model;
> if ((Eax.Bits.FamilyId == 0x06) || (Eax.Bits.FamilyId == 0x0f)) {
> DisplayModel += (Eax.Bits.ExtendedModelId << 4);
> }
>
> This is exactly matches spec without knowledge about Model_ID width and
> makes code consistent.
>
> There is no 'OR" operation in rules defined by SDM:
> "
> IF (Family_ID = 06H or Family_ID = 0FH)
> THEN DisplayModel = (Extended_Model_ID « 4) + Model_ID;
> (* Right justify and zero-extend 4-bit field; display Model_ID as HEX field.*)
> ELSE DisplayModel = Model_ID; FI; "
>
>
> "
>
> On Mon, Mar 6, 2023 at 2:52 PM Ni, Ray <ray.ni@intel.com> wrote:
> >
> > ExtendedModelId field should use shift. So I believe nothing wrong there.
> >
> > > -----Original Message-----
> > > From: Mike Maslenkin <mike.maslenkin@gmail.com>
> > > Sent: Monday, March 6, 2023 7:14 PM
> > > To: devel@edk2.groups.io; Zeng, Star <star.zeng@intel.com>
> > > Cc: Liu, Zhiguang <zhiguang.liu@intel.com>; Dong, Eric
> > > <eric.dong@intel.com>; Ni, Ray <ray.ni@intel.com>; Kumar, Rahul R
> > > <rahul.r.kumar@intel.com>; Gerd Hoffmann <kraxel@redhat.com>
> > > Subject: Re: [edk2-devel] [PATCH] UefiCpuPkg: Calculate
> > > DisplayFamily correctly
> > >
> > > Handling of ExtendedModelId field has the same problem.
> > > This patch could be improved to fix that too.
> > >
> > > On Mon, Mar 6, 2023 at 1:37 PM Zeng, Star <star.zeng@intel.com> wrote:
> > > >
> > > > BTW, look like wrong Bugzilla ID is used in commit message, please
> > > > correct
> > > it when merging the patch.
> > > >
> > > > -----Original Message-----
> > > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > > > Zeng,
> > > Star
> > > > Sent: Monday, March 6, 2023 6:35 PM
> > > > To: devel@edk2.groups.io; Liu, Zhiguang <zhiguang.liu@intel.com>
> > > > Cc: Dong, Eric <eric.dong@intel.com>; Ni, Ray <ray.ni@intel.com>;
> > > > Kumar,
> > > Rahul R <rahul.r.kumar@intel.com>; Gerd Hoffmann
> > > <kraxel@redhat.com>; Zeng, Star <star.zeng@intel.com>
> > > > Subject: Re: [edk2-devel] [PATCH] UefiCpuPkg: Calculate
> > > > DisplayFamily
> > > correctly
> > > >
> > > > Reviewed-by: Star Zeng <star.zeng@intel.com>
> > > >
> > > > -----Original Message-----
> > > > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of
> > > Zhiguang Liu
> > > > Sent: Thursday, March 2, 2023 9:27 AM
> > > > To: devel@edk2.groups.io
> > > > Cc: Liu, Zhiguang <zhiguang.liu@intel.com>; Dong, Eric
> > > <eric.dong@intel.com>; Ni, Ray <ray.ni@intel.com>; Kumar, Rahul R
> > > <rahul.r.kumar@intel.com>; Gerd Hoffmann <kraxel@redhat.com>
> > > > Subject: [edk2-devel] [PATCH] UefiCpuPkg: Calculate DisplayFamily
> > > correctly
> > > >
> > > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4238
> > > >
> > > > Per SDM, DisplayFamily = Extended_Family_ID + Family_ID.
> > > > Correct the related code.
> > > >
> > > > Cc: Eric Dong <eric.dong@intel.com>
> > > > Cc: Ray Ni <ray.ni@intel.com>
> > > > Cc: Rahul Kumar <rahul1.kumar@intel.com>
> > > > Cc: Gerd Hoffmann <kraxel@redhat.com>
> > > > Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
> > > > ---
> > > > UefiCpuPkg/Application/Cpuid/Cpuid.c | 4 ++--
> > > > .../Library/RegisterCpuFeaturesLib/CpuFeaturesInitialize.c | 4 ++--
> > > > 2 files changed, 4 insertions(+), 4 deletions(-)
> > > >
> > > > diff --git a/UefiCpuPkg/Application/Cpuid/Cpuid.c
> > > b/UefiCpuPkg/Application/Cpuid/Cpuid.c
> > > > index 372c6ef87d..51c463fb10 100644
> > > > --- a/UefiCpuPkg/Application/Cpuid/Cpuid.c
> > > > +++ b/UefiCpuPkg/Application/Cpuid/Cpuid.c
> > > > @@ -1,7 +1,7 @@
> > > > /** @file
> > > > UEFI Application to display CPUID leaf information.
> > > >
> > > > - Copyright (c) 2016 - 2019, Intel Corporation. All rights
> > > > reserved.<BR>
> > > > + Copyright (c) 2016 - 2023, Intel Corporation. All rights
> > > > + reserved.<BR>
> > > > SPDX-License-Identifier: BSD-2-Clause-Patent
> > > >
> > > > **/
> > > > @@ -217,7 +217,7 @@ CpuidVersionInfo (
> > > >
> > > > DisplayFamily = Eax.Bits.FamilyId;
> > > > if (Eax.Bits.FamilyId == 0x0F) {
> > > > - DisplayFamily |= (Eax.Bits.ExtendedFamilyId << 4);
> > > > + DisplayFamily += Eax.Bits.ExtendedFamilyId;
> > > > }
> > > >
> > > > DisplayModel = Eax.Bits.Model;
> > > > diff --git
> > > a/UefiCpuPkg/Library/RegisterCpuFeaturesLib/CpuFeaturesInitialize.c
> > > b/UefiCpuPkg/Library/RegisterCpuFeaturesLib/CpuFeaturesInitialize.c
> > > > index a8e4f920fc..25b8958252 100644
> > > > ---
> > > > a/UefiCpuPkg/Library/RegisterCpuFeaturesLib/CpuFeaturesInitialize.
> > > > c
> > > > +++ b/UefiCpuPkg/Library/RegisterCpuFeaturesLib/CpuFeaturesInitial
> > > > +++ ize.c
> > > > @@ -1,7 +1,7 @@
> > > > /** @file
> > > > CPU Features Initialize functions.
> > > >
> > > > - Copyright (c) 2017 - 2021, Intel Corporation. All rights
> > > > reserved.<BR>
> > > > + Copyright (c) 2017 - 2023, Intel Corporation. All rights
> > > > + reserved.<BR>
> > > > SPDX-License-Identifier: BSD-2-Clause-Patent
> > > >
> > > > **/
> > > > @@ -67,7 +67,7 @@ FillProcessorInfo (
> > > >
> > > > DisplayedFamily = Eax.Bits.FamilyId;
> > > > if (Eax.Bits.FamilyId == 0x0F) {
> > > > - DisplayedFamily |= (Eax.Bits.ExtendedFamilyId << 4);
> > > > + DisplayedFamily += Eax.Bits.ExtendedFamilyId;
> > > > }
> > > >
> > > > DisplayedModel = Eax.Bits.Model;
> > > > --
> > > > 2.31.1.windows.1
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> >
> >
> >
> >
> >
>
>
>
>
next prev parent reply other threads:[~2023-03-06 15:28 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-02 1:26 [PATCH] UefiCpuPkg: Calculate DisplayFamily correctly Zhiguang Liu
2023-03-02 1:58 ` Ni, Ray
2023-03-02 7:13 ` Gerd Hoffmann
2023-03-06 10:34 ` [edk2-devel] " Zeng, Star
[not found] ` <1749CE106AC7BFA5.3736@groups.io>
2023-03-06 10:37 ` Zeng, Star
2023-03-06 11:13 ` Mike Maslenkin
2023-03-06 11:52 ` Ni, Ray
2023-03-06 13:36 ` Mike Maslenkin
2023-03-06 15:28 ` Chang, Abner [this message]
2023-03-07 1:50 ` Ni, Ray
2023-03-07 2:44 ` Zhiguang Liu
2023-03-07 1:23 ` Zhiguang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MN2PR12MB396661959B184D5FABF0B17CEAB69@MN2PR12MB3966.namprd12.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox