From: "Chang, Abner" <abner.chang@amd.com>
To: Nickle Wang <nicklew@nvidia.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: Igor Kulchytskyy <igork@ami.com>, Nick Ramirez <nramirez@nvidia.com>
Subject: Re: [PATCH 2/2] RedfishPkg: Redfish discover driver improvement
Date: Sat, 4 Feb 2023 04:25:21 +0000 [thread overview]
Message-ID: <MN2PR12MB3966DA9C0FE868ED7E195C24EAD49@MN2PR12MB3966.namprd12.prod.outlook.com> (raw)
In-Reply-To: <20230201030513.391-1-nicklew@nvidia.com>
[AMD Official Use Only - General]
Thanks for catching these bugs.
Other comments below in line.
> -----Original Message-----
> From: Nickle Wang <nicklew@nvidia.com>
> Sent: Wednesday, February 1, 2023 11:05 AM
> To: devel@edk2.groups.io
> Cc: Chang, Abner <Abner.Chang@amd.com>; Igor Kulchytskyy
> <igork@ami.com>; Nick Ramirez <nramirez@nvidia.com>
> Subject: [PATCH 2/2] RedfishPkg: Redfish discover driver improvement
>
> Caution: This message originated from an External Source. Use proper caution
> when opening attachments, clicking links, or responding.
>
>
> Bug fix:
> - function stack fault
> - properly handle "SubnetAddrInfoIPv6" when there is no IPv6 support
> - copy-n-paste error in RedfishGetHostInterfaceProtocolData()
> Enhancement:
> - Redfish discover driver now can configure host IP address based on
> the information from SMBIOS type 42 record. This saves the effort of
> configuring host IP address in setup menu.
> - Performance improvement to driver binding process. Redfish discover
> driver will wait until all required drivers are ready and do driver
> binding start().
> - Use CopyGuid() to copy GUID instead of intrinsic function.
>
> Signed-off-by: Nickle Wang <nicklew@nvidia.com>
> Cc: Abner Chang <abner.chang@amd.com>
> Cc: Igor Kulchytskyy <igork@ami.com>
> Cc: Nick Ramirez <nramirez@nvidia.com>
> ---
> .../RedfishDiscoverInternal.h | 4 ++
> .../RedfishDiscoverDxe/RedfishDiscoverDxe.c | 52 +++++++++++++++----
> .../RedfishSmbiosHostInterface.c | 2 +-
> 3 files changed, 47 insertions(+), 11 deletions(-)
>
> diff --git a/RedfishPkg/RedfishDiscoverDxe/RedfishDiscoverInternal.h
> b/RedfishPkg/RedfishDiscoverDxe/RedfishDiscoverInternal.h
> index 04fa09e1cc..3e1bfcdc4d 100644
> --- a/RedfishPkg/RedfishDiscoverDxe/RedfishDiscoverInternal.h
> +++ b/RedfishPkg/RedfishDiscoverDxe/RedfishDiscoverInternal.h
> @@ -3,6 +3,7 @@
>
> (C) Copyright 2021 Hewlett Packard Enterprise Development LP<BR>
> Copyright (c) 2022, AMD Incorporated. All rights reserved.
> + Copyright (c) 2023, NVIDIA CORPORATION & AFFILIATES. All rights reserved.
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> @@ -182,6 +183,9 @@ typedef struct {
> //
> BOOLEAN HostIntfValidation; ///< Indicates whether
> to validate Redfish Host interface.
> EFI_IP_ADDRESS TargetIpAddress; ///< Target IP address
> reported in Redfish Host interface.
> + UINT8 HostAddrFormat; ///< Unknown=00h,
> Ipv4=01h, Ipv6=02h.
> + EFI_IP_ADDRESS HostIpAddress; ///< Host IP address
> reported in Redfish Host interface.
> + EFI_IP_ADDRESS HostSubnetMask; ///< Host subnet
> mask address reported in Redfish Host interface.
> } EFI_REDFISH_DISCOVERED_INTERNAL_INSTANCE;
>
> /**
> diff --git a/RedfishPkg/RedfishDiscoverDxe/RedfishDiscoverDxe.c
> b/RedfishPkg/RedfishDiscoverDxe/RedfishDiscoverDxe.c
> index 042d6d5fd5..e72ab71de8 100644
> --- a/RedfishPkg/RedfishDiscoverDxe/RedfishDiscoverDxe.c
> +++ b/RedfishPkg/RedfishDiscoverDxe/RedfishDiscoverDxe.c
> @@ -4,6 +4,7 @@
>
> (C) Copyright 2021 Hewlett Packard Enterprise Development LP<BR>
> Copyright (c) 2022, AMD Incorporated. All rights reserved.
> + Copyright (c) 2023, NVIDIA CORPORATION & AFFILIATES. All rights reserved.
>
> SPDX-License-Identifier: BSD-2-Clause-Patent
>
> @@ -270,10 +271,13 @@ Tcp6GetSubnetInfo (
>
> if (IpModedata.AddressCount == 0) {
> DEBUG ((DEBUG_INFO, "%a: No IPv6 address configured.\n",
> __FUNCTION__));
> + Instance->SubnetAddrInfoIPv6Number = 0;
> + return EFI_SUCCESS;
> }
>
> if (Instance->SubnetAddrInfoIPv6 != NULL) {
> FreePool (Instance->SubnetAddrInfoIPv6);
> + Instance->SubnetAddrInfoIPv6 = NULL;
> }
>
> Instance->SubnetAddrInfoIPv6 = AllocateZeroPool (IpModedata.AddressCount
> * sizeof (EFI_IP6_ADDRESS_INFO)); @@ -519,6 +523,14 @@
> DiscoverRedfishHostInterface (
> return EFI_UNSUPPORTED;
> }
>
> + Instance->HostAddrFormat = Data->HostIpAddressFormat;
> + if (Data->HostIpAddressFormat == 1) {
> + IP4_COPY_ADDRESS ((VOID *)&Instance->HostIpAddress.v4, (VOID *)Data-
> >HostIpAddress);
> + IP4_COPY_ADDRESS ((VOID *)&Instance->HostSubnetMask.v4, (VOID
> *)Data->HostIpMask);
> + } else if (Data->HostIpAddressFormat == 2) {
> + IP6_COPY_ADDRESS ((VOID *)&Instance->HostIpAddress.v6, (VOID *)Data-
> >HostIpAddress);
> + }
> +
> if (Data->RedfishServiceIpAddressFormat == 1) {
> IP4_COPY_ADDRESS ((VOID *)&Instance->TargetIpAddress.v4, (VOID *)Data-
> >RedfishServiceIpAddress);
> } else {
> @@ -849,6 +861,10 @@ AddAndSignalNewRedfishService (
> Status = EFI_OUT_OF_RESOURCES;
> goto EXIT_FREE_CONFIG_DATA;
> }
> +
> + if (Instance->HostAddrFormat == 2) {
I am thinking if we have to return error if Instance->HostAddrFormat is not equal to 2 when LocalAddressIsIPv6 is TRUE?
> + IP6_COPY_ADDRESS (&RestExHttpConfigData-
> >HttpConfigData.AccessPoint.IPv6Node->LocalAddress, &Instance-
> >HostIpAddress.v6);
> + }
> } else {
> RestExHttpConfigData->HttpConfigData.AccessPoint.IPv4Node =
> AllocateZeroPool (sizeof (EFI_HTTPv4_ACCESS_POINT));
> if (RestExHttpConfigData->HttpConfigData.AccessPoint.IPv4Node == NULL)
> { @@ -856,7 +872,13 @@ AddAndSignalNewRedfishService (
> goto EXIT_FREE_CONFIG_DATA;
> }
>
> - RestExHttpConfigData->HttpConfigData.AccessPoint.IPv4Node-
> >UseDefaultAddress = TRUE;
> + if (Instance->HostAddrFormat == 1) {
> + RestExHttpConfigData->HttpConfigData.AccessPoint.IPv4Node-
> >UseDefaultAddress = FALSE;
> + IP4_COPY_ADDRESS (&RestExHttpConfigData-
> >HttpConfigData.AccessPoint.IPv4Node->LocalAddress, &Instance-
> >HostIpAddress.v4);
> + IP4_COPY_ADDRESS (&RestExHttpConfigData-
> >HttpConfigData.AccessPoint.IPv4Node->LocalSubnet, &Instance-
> >HostSubnetMask.v4);
> + } else {
> + RestExHttpConfigData->HttpConfigData.AccessPoint.IPv4Node-
> >UseDefaultAddress = TRUE;
> + }
> }
>
> Status = RestEx->Configure (
> @@ -1467,11 +1489,13 @@ TestForRequiredProtocols (
> IN EFI_HANDLE ControllerHandle
> )
> {
> - UINT32 Id;
> + UINT32 *Id;
> UINTN Index;
> EFI_STATUS Status;
> + UINTN ListCount;
>
> - for (Index = 0; Index < (sizeof (gRequiredProtocol) / sizeof
> (REDFISH_DISCOVER_REQUIRED_PROTOCOL)); Index++) {
> + ListCount = (sizeof (gRequiredProtocol) / sizeof
> + (REDFISH_DISCOVER_REQUIRED_PROTOCOL));
> + for (Index = 0; Index < ListCount; Index++) {
> Status = gBS->OpenProtocol (
> ControllerHandle,
> gRequiredProtocol[Index].RequiredServiceBindingProtocolGuid,
> @@ -1490,8 +1514,10 @@ TestForRequiredProtocols (
> EFI_OPEN_PROTOCOL_GET_PROTOCOL
> );
> if (EFI_ERROR (Status)) {
> - DEBUG ((DEBUG_ERROR, "%a: %s is found on this controller handle.\n",
> __FUNCTION__, gRequiredProtocol[Index].ProtocolName));
> - return EFI_SUCCESS;
> + if (Index == ListCount - 1) {
I am not quite understand this change. Could you please elaborate more about this change?
> + DEBUG ((DEBUG_ERROR, "%a: all required protocols are found on this
> controller handle: %p.\n", __FUNCTION__, ControllerHandle));
> + return EFI_SUCCESS;
> + }
> }
> }
> }
> @@ -1517,7 +1543,7 @@ BuildupNetworkInterface (
> IN EFI_HANDLE ControllerHandle
> )
> {
> - UINT32 Id;
> + UINT32 *Id;
> UINT32 Index;
> EFI_REDFISH_DISCOVER_NETWORK_INTERFACE_INTERNAL
> *NetworkInterface;
> BOOLEAN IsNew;
> @@ -1581,10 +1607,8 @@ BuildupNetworkInterface (
> NetworkInterface->NetworkProtocolType =
> gRequiredProtocol[Index].ProtocolType;
> NetworkInterface->OpenDriverAgentHandle = This-
> >DriverBindingHandle;
> NetworkInterface->OpenDriverControllerHandle = ControllerHandle;
> - NetworkInterface->NetworkInterfaceProtocolInfo.ProtocolGuid = \
> - *gRequiredProtocol[Index].RequiredProtocolGuid;
> - NetworkInterface->NetworkInterfaceProtocolInfo.ProtocolServiceGuid = \
> - *gRequiredProtocol[Index].RequiredServiceBindingProtocolGuid;
> + CopyGuid (&NetworkInterface-
> >NetworkInterfaceProtocolInfo.ProtocolGuid,
> gRequiredProtocol[Index].RequiredProtocolGuid);
> + CopyGuid
> + (&NetworkInterface->NetworkInterfaceProtocolInfo.ProtocolServiceGuid,
> + gRequiredProtocol[Index].RequiredServiceBindingProtocolGuid);
> ProtocolDiscoverIdPtr = &NetworkInterface-
> >NetworkInterfaceProtocolInfo.ProtocolDiscoverId;
> OpenDriverAgentHandle = NetworkInterface->OpenDriverAgentHandle;
> OpenDriverControllerHandle = NetworkInterface-
> >OpenDriverControllerHandle;
> @@ -1678,6 +1702,14 @@ BuildupNetworkInterface (
> if (EFI_ERROR (Status)) {
> DEBUG ((DEBUG_ERROR, "%a: Fail to install
> EFI_REDFISH_DISCOVER_PROTOCOL\n", __FUNCTION__));
> }
> + } else {
> + DEBUG ((DEBUG_INFO, "%a, Not REST EX, continue with next\n",
> __FUNCTION__));
> + Index++;
Space between Index and "++".
Thanks
Abner
> + if (Index == (sizeof (gRequiredProtocol) / sizeof
> (REDFISH_DISCOVER_REQUIRED_PROTOCOL))) {
> + break;
> + }
> +
> + continue;
> }
> }
>
> diff --git a/RedfishPkg/RedfishDiscoverDxe/RedfishSmbiosHostInterface.c
> b/RedfishPkg/RedfishDiscoverDxe/RedfishSmbiosHostInterface.c
> index 88cec1f416..b25a222a88 100644
> --- a/RedfishPkg/RedfishDiscoverDxe/RedfishSmbiosHostInterface.c
> +++ b/RedfishPkg/RedfishDiscoverDxe/RedfishSmbiosHostInterface.c
> @@ -71,7 +71,7 @@ RedfishGetHostInterfaceProtocolData (
> if (*RecordTmp ==
> REDFISH_HOST_INTERFACE_DEVICE_TYPE_PCI_PCIE_V2) {
> ASSERT (SpecificDataLen == sizeof
> (PCI_OR_PCIE_INTERFACE_DEVICE_DESCRIPTOR_V2) + 1);
> } else {
> - ASSERT (SpecificDataLen > sizeof
> (REDFISH_HOST_INTERFACE_DEVICE_TYPE_USB_V2) + 1);
> + ASSERT (SpecificDataLen == sizeof
> + (USB_INTERFACE_DEVICE_DESCRIPTOR_V2) + 1);
> }
>
> *DeviceDescriptor = (REDFISH_INTERFACE_DATA *)RecordTmp;
> --
> 2.39.1.windows.1
next prev parent reply other threads:[~2023-02-04 4:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-01 3:05 [PATCH 2/2] RedfishPkg: Redfish discover driver improvement Nickle Wang
2023-02-04 4:25 ` Chang, Abner [this message]
[not found] ` <1740847CF215CCF8.27199@groups.io>
2023-02-04 4:51 ` [edk2-devel] " Chang, Abner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MN2PR12MB3966DA9C0FE868ED7E195C24EAD49@MN2PR12MB3966.namprd12.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox