Mike, This is not friendly for XIP code. With XIP code, the global variable is not able to be updated as it sits in read-only SPI flash. Thanks, Ray ________________________________ From: Kinney, Michael D Sent: Tuesday, October 31, 2023 11:37 AM To: Ni, Ray ; Andrew (EFI) Fish ; edk2-devel-groups-io ; Rebecca Cran ; Hernandez Miramontes, Jose Miguel Cc: Kinney, Michael D Subject: RE: [edk2-devel] CpuDeadLoop() is optimized by compiler Does using a static volatile global instead of a volatile local work? Mike From: Ni, Ray Sent: Monday, October 30, 2023 7:52 PM To: Andrew (EFI) Fish ; edk2-devel-groups-io ; Rebecca Cran ; Hernandez Miramontes, Jose Miguel Cc: Kinney, Michael D Subject: Re: [edk2-devel] CpuDeadLoop() is optimized by compiler It's been a while. Is there any better solution? Can we go with assembly solution? Thanks, Ray ________________________________ From: Andrew (EFI) Fish > Sent: Saturday, May 20, 2023 12:31 AM To: edk2-devel-groups-io >; Rebecca Cran > Cc: Ni, Ray >; Kinney, Michael D > Subject: Re: [edk2-devel] CpuDeadLoop() is optimized by compiler I don’t think the atomic is going to help. The compiler honored the volatile by doing a read, but assumed it would never change due to scoping. As you can see in my example if the compiler thinks DeadLoopCount can be changed it will put the check back in and assume the function can return. So an assembly function that does nothing called IncreaseScope() would fix this issue too. void IncreaseScope(int *ptr); void CpuDeadLoopFix(void) { volatile int DeadLoopCount = 0; while(DeadLoopCount == 0) { IncreaseScope(&DeadLoopCount); } } void CpuDeadLoop(void) { volatile int DeadLoopCount = 0; while(DeadLoopCount == 0); } Gives us: voltbl SEGMENT voltbl ENDS voltbl SEGMENT voltbl ENDS DeadLoopCount$ = 48 CpuDeadLoopFix PROC ; COMDAT $LN12: sub rsp, 40 ; 00000028H mov DWORD PTR DeadLoopCount$[rsp], 0 jmp SHORT $LN10@CpuDeadLoo $LL2@CpuDeadLoo: lea rcx, QWORD PTR DeadLoopCount$[rsp] call IncreaseScope $LN10@CpuDeadLoo: mov eax, DWORD PTR DeadLoopCount$[rsp] test eax, eax je SHORT $LL2@CpuDeadLoo add rsp, 40 ; 00000028H ret 0 CpuDeadLoopFix ENDP DeadLoopCount$ = 8 CpuDeadLoop PROC ; COMDAT mov DWORD PTR DeadLoopCount$[rsp], 0 $LL2@CpuDeadLoo: mov eax, DWORD PTR DeadLoopCount$[rsp] jmp SHORT $LL2@CpuDeadLoo CpuDeadLoop ENDP Compiler Explorer godbolt.org [cid:image001.png@01DA0B70.D989F270] Thanks, Andrew Fish PS I’m still not 100% sure it is a compiler bug. Some times things like this are due to the order the compiler applies the optimizations, and changing the order can change the behavior. On May 19, 2023, at 8:31 AM, Rebecca Cran > wrote: Just to add more data, I also tried with "volatile sig_atomic_t" as someone suggested and both "/volatile:iso" and "/volatile:ms" with no change in results. -- Rebecca Cran On 5/18/23 20:53, Ni, Ray wrote: I think all the options we considered are workarounds. These might break again if compiler is “cleverer” in future. Unless some Cxx spec clearly guarantees that. I like Mike’s idea to use assembly implementation for CpuDeadLoop. The assembly can simply “jmp $” then “ret”. I didn’t find a dead-loop intrinsic function in MSVC. Any better idea? Thanks, Ray *From:* Andrew (EFI) Fish > *Sent:* Friday, May 19, 2023 8:42 AM *To:* devel@edk2.groups.io; Kinney, Michael D > *Cc:* Ni, Ray >; Rebecca Cran > *Subject:* Re: [edk2-devel] CpuDeadLoop() is optimized by compiler Mike, Sorry static was just to scope the name to the file since it is a lib, not to make it work. That is a cool site. I learned about it complaining about stuff to the compiler team on our internal clang Slack channel as they use it to answer my questions. Thanks, Andrew Fish On May 18, 2023, at 2:42 PM, Michael D Kinney > wrote: Using that tool, the following fragment seems to generate the right code. Volatile is required. Static is optional. staticvolatileint mDeadLoopCount =0; void CpuDeadLoop( void ) { while(mDeadLoopCount ==0); } GCC === CpuDeadLoop(): .L2: moveax,DWORDPTRmDeadLoopCount[rip] testeax,eax je.L2 ret CLANG ===== CpuDeadLoop():# @CpuDeadLoop() .LBB0_1: # =>This Inner Loop Header:Depth=1 cmpdwordptr[rip+_ZL14mDeadLoopCount],0 je.LBB0_1 ret Mike *From:*Andrew (EFI) Fish > *Sent:*Thursday, May 18, 2023 1:45 PM *To:*edk2-devel-groups-io >; Andrew Fish > *Cc:*Kinney, Michael D >; Ni, Ray >; Rebecca Cran > *Subject:*Re: [edk2-devel] CpuDeadLoop() is optimized by compiler Whoops wrong compiler. Here is an update. I added the flags so this one reproduces the issue. Compiler Explorer godbolt.org Thanks, Andrew Fish On May 18, 2023, at 11:45 AM, Andrew Fish viagroups.io > wrote: Mike, This is a good way to play around with fixes, and to report bugs. You can see the assembler for different compilers with different flag. Compiler Explorer godbolt.org Sorry I’m traveling and in Cupertino with lots of meetings so I did not have time to adjust the compiler flags…. Thanks, Andrew Fish On May 18, 2023, at 10:24 AM, Andrew (EFI) Fish > wrote: Mike, I guess my other question… If this turns out to be a compiler bug should we scope the change to the broken toolchain. I’m not sure what the right answer is for that, but I want to ask the question? Thanks, Andrew Fish On May 18, 2023, at 10:19 AM, Michael D Kinney > wrote: Andrew, This might work for XIP. Set non const global to initial value that is expected value to stay in dead loop. UINTN mDeadLoopCount = 0; VOID CpuDeadLoop( VOID ) { while (mDeadLoopCount == 0) { CpuPause(); } } When deadloop is entered, developer can not change value of mDeadLoopCount, but they can use debugger to force exit loop and return from function. Mike *From:*Andrew (EFI) Fish > *Sent:*Thursday, May 18, 2023 10:09 AM *To:*Kinney, Michael D > *Cc:*edk2-devel-groups-io >; Ni, Ray >; Rebecca Cran > *Subject:*Re: [edk2-devel] CpuDeadLoop() is optimized by compiler Mike, Good point, that is why we are using the stack …. The only other thing I can think of is to pass the address of Index to some inline assembler, or an asm no op function, to give it a side effect the compiler can’t resolve. Thanks, Andrew Fish On May 18, 2023, at 10:05 AM, Kinney, Michael D > wrote: Static global will not work for XIP Mike *From:*Andrew (EFI) Fish > *Sent:*Thursday, May 18, 2023 9:49 AM *To:*edk2-devel-groups-io >; Kinney, Michael D > *Cc:*Ni, Ray >; Rebecca Cran > *Subject:*Re: [edk2-devel] CpuDeadLoop() is optimized by compiler Mike, I pinged some compiler experts to see if our code is correct, or if the compiler has an issue. Seems to be trending compiler issue right now, but I’ve NOT gotten feedback from anyone on the spec committee yet. If we move Index to a static global that would likely work around the compiler issue. Thanks, Andrew Fish On May 18, 2023, at 8:36 AM, Michael D Kinney > wrote: Hi Ray, So the code generated does deadloop, but is just not easy to resume from as we have been able to do in the past. We use CpuDeadloop() for 2 purposes. One is a terminal condition with no reason to ever continue. The 2^nd is a debug aide for developers to halt the system at a specific location and then continue from that point, usually with a debugger, to step through code to an area to evaluate unexpected behavior. We may have to do a NASM implementation of CpuDeadloop() to make sure it meets both use cases. Mike *From:*Ni, Ray > *Sent:*Thursday, May 18, 2023 3:00 AM *To:*devel@edk2.groups.io *Cc:*Kinney, Michael D >; Rebecca Cran >; Ni, Ray > *Subject:*CpuDeadLoop() is optimized by compiler Hi, Starting from certain version of Visual Studio C compiler (I don’t have the exact version. I am using VS2019), CpuDeadLoop is now optimized quite well by compiler. The optimization is so “good” that it becomes harder for developers to break out of the deadloop. I copied the assembly instructions as below for your reference. The compiler does not generate instructions that jump out of the loop when the Index is not zero. So in order to break out of the loop, developers need to: 1. Manually adjust rsp by increasing 40 2. Manually “ret” I am not sure if anyone has interest to re-write this function so that compiler can be “fooled” again. Thanks, Ray ======================= ; Function compile flags: /Ogspy ; File e:\work\edk2\MdePkg\Library\BaseLib\CpuDeadLoop.c ; COMDAT CpuDeadLoop _TEXT SEGMENT Index$ = 48 CpuDeadLoop PROC ; COMDAT ; 26 : { $LN12: 00000 48 83 ec 28 sub rsp, 40 ; 00000028H ; 27 : volatile UINTN Index; ; 28 : ; 29 : for (Index = 0; Index == 0;) { 00004 48 c7 44 24 30 00 00 00 00 mov QWORD PTR Index$[rsp], 0 $LN10@CpuDeadLoo: ; 30 : CpuPause (); 0000d 48 8b 44 24 30 mov rax, QWORD PTR Index$[rsp] 00012 e8 00 00 00 00 call CpuPause 00017 eb f4 jmp SHORT $LN10@CpuDeadLoo CpuDeadLoop ENDP _TEXT ENDS END -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#110386): https://edk2.groups.io/g/devel/message/110386 Mute This Topic: https://groups.io/mt/98987896/7686176 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io] -=-=-=-=-=-=-=-=-=-=-=-