BZ:
https://bugzilla.tianocore.org/show_bug.cgi?id=4654
The RMPADJUST instruction is used to change the VMSA attribute of a page,
but the VMSA attribute can only be changed when running at VMPL0. To
prepare for running at a less priviledged VMPL, use the AmdSvsmLib library
API to perform the RMPADJUST. The AmdSvsmLib library will perform the
proper operation on behalf of the caller.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf | 1 +
UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf | 1 +
UefiCpuPkg/Library/MpInitLib/MpLib.h | 14 -----
UefiCpuPkg/Library/MpInitLib/Ia32/AmdSev.c | 20 --------
UefiCpuPkg/Library/MpInitLib/X64/AmdSev.c | 54 +++-----------------
5 files changed, 9 insertions(+), 81 deletions(-)
diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf b/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
index 69950fcd1289..19745437f005 100644
--- a/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
+++ b/UefiCpuPkg/Library/MpInitLib/DxeMpInitLib.inf
@@ -57,6 +57,7 @@ [LibraryClasses]
SynchronizationLib
PcdLib
CcExitLib
+ AmdSvsmLib
MicrocodeLib
[LibraryClasses.X64]
CpuPageTableLib
diff --git a/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf b/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
index 22f74a814534..679e51a1acd5 100644
--- a/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
+++ b/UefiCpuPkg/Library/MpInitLib/PeiMpInitLib.inf
@@ -53,6 +53,7 @@ [LibraryClasses]
PeiServicesLib
PcdLib
CcExitLib
+ AmdSvsmLib
MicrocodeLib
[Pcd]
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.h b/UefiCpuPkg/Library/MpInitLib/MpLib.h
index 65e05c4806f5..179f8e585b5d 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.h
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.h
@@ -883,20 +883,6 @@ FillExchangeInfoDataSevEs (
IN volatile MP_CPU_EXCHANGE_INFO *ExchangeInfo
);
-/**
- Issue RMPADJUST to adjust the VMSA attribute of an SEV-SNP page.
-
- @param[in] PageAddress
- @param[in] VmsaPage
-
- @return RMPADJUST return value
-**/
-UINT32
-SevSnpRmpAdjust (
- IN EFI_PHYSICAL_ADDRESS PageAddress,
- IN BOOLEAN VmsaPage
- );
-
/**
Create an SEV-SNP AP save area (VMSA) for use in running the vCPU.
diff --git a/UefiCpuPkg/Library/MpInitLib/Ia32/AmdSev.c b/UefiCpuPkg/Library/MpInitLib/Ia32/AmdSev.c
index 0478e92317f1..963bd62494b9 100644
--- a/UefiCpuPkg/Library/MpInitLib/Ia32/AmdSev.c
+++ b/UefiCpuPkg/Library/MpInitLib/Ia32/AmdSev.c
@@ -49,26 +49,6 @@ SevSnpCreateAP (
ASSERT (FALSE);
}
-/**
- Issue RMPADJUST to adjust the VMSA attribute of an SEV-SNP page.
-
- @param[in] PageAddress
- @param[in] VmsaPage
-
- @return RMPADJUST return value
-**/
-UINT32
-SevSnpRmpAdjust (
- IN EFI_PHYSICAL_ADDRESS PageAddress,
- IN BOOLEAN VmsaPage
- )
-{
- //
- // RMPADJUST is not supported in 32-bit mode
- //
- return RETURN_UNSUPPORTED;
-}
-
/**
Determine if the SEV-SNP AP Create protocol should be used.
diff --git a/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.c b/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.c
index bd12a5ee2fcb..981135621384 100644
--- a/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.c
+++ b/UefiCpuPkg/Library/MpInitLib/X64/AmdSev.c
@@ -10,6 +10,7 @@
#include "MpLib.h"
#include <Library/CcExitLib.h>
+#include <Library/AmdSvsmLib.h>
#include <Register/Amd/Fam17Msr.h>
#include <Register/Amd/Ghcb.h>
@@ -38,20 +39,15 @@ SevSnpPerformApAction (
BOOLEAN InterruptState;
UINT64 ExitInfo1;
UINT64 ExitInfo2;
- UINT32 RmpAdjustStatus;
UINT64 VmgExitStatus;
+ EFI_STATUS VmsaStatus;
if (Action == SVM_VMGEXIT_SNP_AP_CREATE) {
//
- // To turn the page into a recognized VMSA page, issue RMPADJUST:
- // Target VMPL but numerically higher than current VMPL
- // Target PermissionMask is not used
+ // Turn the page into a recognized VMSA page.
//
- RmpAdjustStatus = SevSnpRmpAdjust (
- (EFI_PHYSICAL_ADDRESS)(UINTN)SaveArea,
- TRUE
- );
- if (RmpAdjustStatus != 0) {
+ VmsaStatus = AmdSvsmSnpVmsaRmpAdjust (SaveArea, ApicId, TRUE);
+ if (EFI_ERROR (VmsaStatus)) {
DEBUG ((DEBUG_INFO, "SEV-SNP: RMPADJUST failed for VMSA creation\n"));
ASSERT (FALSE);
@@ -94,11 +90,8 @@ SevSnpPerformApAction (
// Make the current VMSA not runnable and accessible to be
// reprogrammed.
//
- RmpAdjustStatus = SevSnpRmpAdjust (
- (EFI_PHYSICAL_ADDRESS)(UINTN)SaveArea,
- FALSE
- );
- if (RmpAdjustStatus != 0) {
+ VmsaStatus = AmdSvsmSnpVmsaRmpAdjust (SaveArea, ApicId, FALSE);
+ if (EFI_ERROR (VmsaStatus)) {
DEBUG ((DEBUG_INFO, "SEV-SNP: RMPADJUST failed for VMSA reset\n"));
ASSERT (FALSE);
@@ -328,39 +321,6 @@ SevSnpCreateAP (
}
}
-/**
- Issue RMPADJUST to adjust the VMSA attribute of an SEV-SNP page.
-
- @param[in] PageAddress
- @param[in] VmsaPage
-
- @return RMPADJUST return value
-**/
-UINT32
-SevSnpRmpAdjust (
- IN EFI_PHYSICAL_ADDRESS PageAddress,
- IN BOOLEAN VmsaPage
- )
-{
- UINT64 Rdx;
-
- //
- // The RMPADJUST instruction is used to set or clear the VMSA bit for a
- // page. The VMSA change is only made when running at VMPL0 and is ignored
- // otherwise. If too low a target VMPL is specified, the instruction can
- // succeed without changing the VMSA bit when not running at VMPL0. Using a
- // target VMPL level of 1, RMPADJUST will return a FAIL_PERMISSION error if
- // not running at VMPL0, thus ensuring that the VMSA bit is set appropriately
- // when no error is returned.
- //
- Rdx = 1;
- if (VmsaPage) {
- Rdx |= RMPADJUST_VMSA_PAGE_BIT;
- }
-
- return AsmRmpAdjust ((UINT64)PageAddress, 0, Rdx);
-}
-
/**
Determine if the SEV-SNP AP Create protocol should be used.
--
2.43.2