Mike, Tom, How about AsmCpuId() adds ASSERT() to reject those CPUID leaves that do not have sub-leaf? Another concern I have if AsmCpuid() zeros ECX is callers would call AsmCpuid(leaf) instead of AsmCpuidEx (leaf, 0). This would cause the caller code a mess. Thanks, Ray From: Kinney, Michael D Sent: Saturday, January 20, 2024 9:49 AM To: Ni, Ray ; Tom Lendacky ; devel@edk2.groups.io; Gao, Liming ; Liu, Zhiguang ; Dong, Eric ; Kumar, Rahul R ; Gerd Hoffmann ; Ard Biesheuvel Cc: Michael Roth ; Kinney, Michael D Subject: RE: [edk2-devel] [PATCH 1/2] UefiCpuPkg/MpInitLib: Use AsmCpuidEx() for CPUID_EXTENDED_TOPOLOGY leaf The issue is if AsmCpuid() is called for an Index value that does depend on ECX. That would be a bug on the caller's part and would not have deterministic behavior because ECX on input is not deterministic. That is the condition that would be good to catch. Mike From: Ni, Ray > Sent: Friday, January 19, 2024 3:49 PM To: Kinney, Michael D >; Tom Lendacky >; devel@edk2.groups.io; Gao, Liming >; Liu, Zhiguang >; Dong, Eric >; Kumar, Rahul R >; Gerd Hoffmann >; Ard Biesheuvel > Cc: Michael Roth >; Kinney, Michael D > Subject: Re: [edk2-devel] [PATCH 1/2] UefiCpuPkg/MpInitLib: Use AsmCpuidEx() for CPUID_EXTENDED_TOPOLOGY leaf Mike, For a certain Cupid leaf that does not have sub leaf, Cupid instruction does not consume ecx and it always fills ecx with a determined value, defined by sdm. So, I don't see any hurt to deterministic behavior if not zeroing ecx in AsmCpuid. thanks, ray ________________________________ From: Kinney, Michael D > Sent: Saturday, January 20, 2024 7:16:14 AM To: Ni, Ray >; Tom Lendacky >; devel@edk2.groups.io >; Gao, Liming >; Liu, Zhiguang >; Dong, Eric >; Kumar, Rahul R >; Gerd Hoffmann >; Ard Biesheuvel > Cc: Michael Roth >; Kinney, Michael D > Subject: RE: [edk2-devel] [PATCH 1/2] UefiCpuPkg/MpInitLib: Use AsmCpuidEx() for CPUID_EXTENDED_TOPOLOGY leaf Hi Ray, It is about having deterministic behavior if a call if made for a CPUID EAX value that does depend on ECX. If ECX is not zeroed, then it will have a random value that may return different information. The problem statement from Tom is not about zeroing ECX. It is about avoiding code bugs where AsmCpuid() is called for an Index value that is documented to depend on ECX. In this case, we would want an error condition so the developer knows they should use AsmCpuidEx() instead. From looking at the Intel SDM, there is a small set of Index values that do not look at ECX at all. We could consider adding an ASSERT() condition in AsmCpuid() if Index is a value that depends on ECX. Perhaps in DEBUG_CODE() so it is not always present. Mike > -----Original Message----- > From: Ni, Ray > > Sent: Friday, January 19, 2024 2:01 AM > To: Kinney, Michael D >; Tom Lendacky > >; devel@edk2.groups.io; Gao, Liming > >; Liu, Zhiguang >; Dong, > Eric >; Kumar, Rahul R >; > Gerd Hoffmann >; Ard Biesheuvel > > > Cc: Michael Roth > > Subject: RE: [edk2-devel] [PATCH 1/2] UefiCpuPkg/MpInitLib: Use > AsmCpuidEx() for CPUID_EXTENDED_TOPOLOGY leaf > > Mike, > I agree with your words after "However". > Zeroing ECX in AsmCpuid() is confusing to future code maintainer: If > CPUID instruction does > not consume "ECX", why is it needed to zero "ECX"? > > Thanks, > Ray > > -----Original Message----- > > From: Kinney, Michael D > > > Sent: Friday, January 19, 2024 7:11 AM > > To: Tom Lendacky >; devel@edk2.groups.io; > > Gao, Liming >; Liu, Zhiguang > >; > > Dong, Eric >; Ni, Ray >; Kumar, > Rahul R > > >; Gerd Hoffmann >; Ard > > Biesheuvel > > > Cc: Michael Roth >; Kinney, Michael D > > > > > Subject: RE: [edk2-devel] [PATCH 1/2] UefiCpuPkg/MpInitLib: Use > > AsmCpuidEx() for CPUID_EXTENDED_TOPOLOGY leaf > > > > Hi Tom, > > > > I do not see any harm in zeroing ECX in AsmCpuid(). > > > > If it is not zeroed, then it would have an undefined value. > > > > However, calling AsmCpuid() for any Index that evaluates ECX > > (including a check for 0) should never be done. If ECX is > > evaluated for a given Index, then AsmCpuIdEx() must be used. > > > > Mike > > > > > -----Original Message----- > > > From: Tom Lendacky > > > > Sent: Wednesday, January 17, 2024 1:26 PM > > > To: devel@edk2.groups.io; Kinney, Michael D > > > >; Gao, Liming >; > Liu, > > > Zhiguang >; Dong, Eric >; > Ni, > > > Ray >; Kumar, Rahul R >; > Gerd > > > Hoffmann >; Ard Biesheuvel > > > > > > Cc: Michael Roth > > > > Subject: Re: [edk2-devel] [PATCH 1/2] UefiCpuPkg/MpInitLib: Use > > > AsmCpuidEx() for CPUID_EXTENDED_TOPOLOGY leaf > > > > > > On 11/28/23 08:35, Lendacky, Thomas via groups.io wrote: > > > > On 11/6/23 17:15, Tom Lendacky wrote: > > > >> On 11/6/23 16:45, Lendacky, Thomas via groups.io wrote: > > > >>> The CPUID_EXTENDED_TOPOLOGY CPUID leaf takes a subleaf as input > > when > > > >>> returning CPUID information. However, the AsmCpuid() function > does > > > not > > > >>> zero out ECX before the CPUID instruction, so the input leaf is > used > > > as > > > >>> the sub-leaf for the CPUID request and returns erroneous/invalid > > > CPUID > > > >>> data, since the intent of the request was to get data related to > > > sub-leaf > > > >>> 0. Instead, use AsmCpuidEx() for the CPUID_EXTENDED_TOPOLOGY > leaf. > > > >> > > > >> Alternatively, the AsmCpuid() function could be changed to XOR > ECX > > > >> before invoking the CPUID instruction. This would ensure that the > 0 > > > >> sub-leaf is returned for any CPUID leaves that support sub- > leaves. > > > >> Thoughts? > > > >> > > > >> Adding some additional maintainers for their thoughts, too. > > > > > > > > Any thoughts on this approach (as a separate, unrelated patch) to > > > > eliminate future issues that could pop up? > > > > > > > > Seems like zeroing out ECX before calling CPUID would be an > > > appropriate > > > > thing to do, but I'm not sure if that will have any impact on the > > > existing > > > > code base... it shouldn't, but you never know. > > > > > > Just a re-ping for thoughts on this. > > > > > > Thanks, > > > Tom > > > > > > > > > > > Thanks, > > > > Tom > > > > > > > >> > > > >> Thanks, > > > >> Tom -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#114113): https://edk2.groups.io/g/devel/message/114113 Mute This Topic: https://groups.io/mt/102432782/7686176 Group Owner: devel+owner@edk2.groups.io Unsubscribe: https://edk2.groups.io/g/devel/leave/12367111/7686176/1913456212/xyzzy [rebecca@openfw.io] -=-=-=-=-=-=-=-=-=-=-=-