Re: [edk2-devel] [PATCH v2 13/13] UefiCpuPkg: Add CpuDxe driver for LoongArch64

["Ni, Ray" <ray.ni@intel.com>]

[-- Attachment #1: Type: text/plain, Size: 65604 bytes --]

Can you rename PcdCpuExceptionVectorBaseAddress to PcdLoongArch64ExceptionVectorBaseAddress and put the PCD definition/reference in the DEC/INF LoongArch64 section?

Thanks,
Ray
________________________________
From: Chao Li <lichao@loongson.cn>
Sent: Wednesday, March 20, 2024 16:43
To: devel@edk2.groups.io <devel@edk2.groups.io>
Cc: Ni, Ray <ray.ni@intel.com>; Kumar, Rahul R <rahul.r.kumar@intel.com>; Gerd Hoffmann <kraxel@redhat.com>; Baoqi Zhang <zhangbaoqi@loongson.cn>; Dongyan Qian <qiandongyan@loongson.cn>
Subject: [PATCH v2 13/13] UefiCpuPkg: Add CpuDxe driver for LoongArch64

Added LoongArch64 CPU driver into CpuDxe.

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4734

Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Co-authored-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Co-authored-by: Dongyan Qian <qiandongyan@loongson.cn>
---
 UefiCpuPkg/CpuDxe/CpuDxe.inf              |  23 +-
 UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.c    | 426 +++++++++++++++++
 UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.h    | 288 ++++++++++++
 UefiCpuPkg/CpuDxe/LoongArch64/CpuMp.c     | 544 ++++++++++++++++++++++
 UefiCpuPkg/CpuDxe/LoongArch64/Exception.c | 159 +++++++
 5 files changed, 1436 insertions(+), 4 deletions(-)
 create mode 100644 UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.c
 create mode 100644 UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.h
 create mode 100644 UefiCpuPkg/CpuDxe/LoongArch64/CpuMp.c
 create mode 100644 UefiCpuPkg/CpuDxe/LoongArch64/Exception.c

diff --git a/UefiCpuPkg/CpuDxe/CpuDxe.inf b/UefiCpuPkg/CpuDxe/CpuDxe.inf
index 9e1c673283..50db9e8ed1 100644
--- a/UefiCpuPkg/CpuDxe/CpuDxe.inf
+++ b/UefiCpuPkg/CpuDxe/CpuDxe.inf
@@ -3,6 +3,7 @@
 #
 #  Copyright (c) 2008 - 2019, Intel Corporation. All rights reserved.<BR>
 #  Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>
+#  Copyright (c) 2024, Loongson Technology Corporation Limited. All rights reserved.<BR>
 #
 #  SPDX-License-Identifier: BSD-2-Clause-Patent
 #
@@ -22,7 +23,7 @@ [Packages]
   MdeModulePkg/MdeModulePkg.dec
   UefiCpuPkg/UefiCpuPkg.dec

-[LibraryClasses]
+[LibraryClasses.common]
   BaseLib
   BaseMemoryLib
   CpuExceptionHandlerLib
@@ -30,9 +31,7 @@ [LibraryClasses]
   DebugLib
   DxeServicesTableLib
   HobLib
-  LocalApicLib
   MemoryAllocationLib
-  MtrrLib
   MpInitLib
   PeCoffGetEntryPointLib
   ReportStatusCodeLib
@@ -41,7 +40,15 @@ [LibraryClasses]
   UefiDriverEntryPoint
   UefiLib

-[Sources]
+[LibraryClasses.IA32, LibraryClasses.X64]
+  LocalApicLib
+  MtrrLib
+
+[LibraryClasses.LoongArch64]
+  CacheMaintenanceLib
+  CpuMmuLib
+
+[Sources.IA32, Sources.X64]
   CpuDxe.c
   CpuDxe.h
   CpuGdt.c
@@ -59,6 +66,13 @@ [Sources.X64]
   X64/CpuAsm.nasm
   X64/PagingAttribute.c

+[Sources.LoongArch64]
+  CpuMp.h
+  LoongArch64/CpuDxe.c
+  LoongArch64/CpuMp.c
+  LoongArch64/Exception.c
+  LoongArch64/CpuDxe.h
+
 [Protocols]
   gEfiCpuArchProtocolGuid                       ## PRODUCES
   gEfiMpServiceProtocolGuid                     ## PRODUCES
@@ -80,6 +94,7 @@ [Pcd]
   gEfiMdeModulePkgTokenSpaceGuid.PcdTdxSharedBitMask                    ## CONSUMES
   gUefiCpuPkgTokenSpaceGuid.PcdCpuStackSwitchExceptionList              ## CONSUMES
   gUefiCpuPkgTokenSpaceGuid.PcdCpuKnownGoodStackSize                    ## CONSUMES
+  gUefiCpuPkgTokenSpaceGuid.PcdCpuExceptionVectorBaseAddress            ## CONSUMES

 [Depex]
   TRUE
diff --git a/UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.c b/UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.c
new file mode 100644
index 0000000000..f7c34fdfee
--- /dev/null
+++ b/UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.c
@@ -0,0 +1,426 @@
+/** @file CpuDxe.c
+
+  CPU DXE Module to produce CPU ARCH Protocol.
+
+  Copyright (c) 2024, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include "CpuDxe.h"
+#include "CpuMp.h"
+#include <Guid/IdleLoopEvent.h>
+#include <Library/CpuMmuLib.h>
+#include <Library/TimerLib.h>
+#include <Register/LoongArch64/Csr.h>
+
+UINT64  mTimerPeriod = 0;
+
+/**
+  IPI Interrupt Handler.
+
+  @param InterruptType    The type of interrupt that occurred
+  @param SystemContext    A pointer to the system context when the interrupt occurred
+**/
+VOID
+EFIAPI
+IpiInterruptHandler (
+  IN EFI_EXCEPTION_TYPE  InterruptType,
+  IN EFI_SYSTEM_CONTEXT  SystemContext
+  );
+
+//
+// Globals used to initialize the protocol
+//
+EFI_HANDLE             mCpuHandle = NULL;
+EFI_CPU_ARCH_PROTOCOL  gCpu       = {
+  CpuFlushCpuDataCache,
+  CpuEnableInterrupt,
+  CpuDisableInterrupt,
+  CpuGetInterruptState,
+  CpuInit,
+  CpuRegisterInterruptHandler,
+  CpuGetTimerValue,
+  CpuSetMemoryAttributes,
+  0,          // NumberOfTimers
+  4,          // DmaBufferAlignment
+};
+
+/**
+  This function flushes the range of addresses from Start to Start+Length
+  from the processor's data cache. If Start is not aligned to a cache line
+  boundary, then the bytes before Start to the preceding cache line boundary
+  are also flushed. If Start+Length is not aligned to a cache line boundary,
+  then the bytes past Start+Length to the end of the next cache line boundary
+  are also flushed. The FlushType of EfiCpuFlushTypeWriteBackInvalidate must be
+  supported. If the data cache is fully coherent with all DMA operations, then
+  this function can just return EFI_SUCCESS. If the processor does not support
+  flushing a range of the data cache, then the entire data cache can be flushed.
+
+  @param  This             The EFI_CPU_ARCH_PROTOCOL instance.
+  @param  Start            The beginning physical address to flush from the processor's data
+                           cache.
+  @param  Length           The number of bytes to flush from the processor's data cache. This
+                           function may flush more bytes than Length specifies depending upon
+                           the granularity of the flush operation that the processor supports.
+  @param  FlushType        Specifies the type of flush operation to perform.
+
+  @retval EFI_SUCCESS           The address range from Start to Start+Length was flushed from
+                                the processor's data cache.
+  @retval EFI_INVALID_PARAMETER The processor does not support the cache flush type specified
+                                by FlushType.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuFlushCpuDataCache (
+  IN EFI_CPU_ARCH_PROTOCOL  *This,
+  IN EFI_PHYSICAL_ADDRESS   Start,
+  IN UINT64                 Length,
+  IN EFI_CPU_FLUSH_TYPE     FlushType
+  )
+{
+  switch (FlushType) {
+    case EfiCpuFlushTypeWriteBack:
+      WriteBackDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
+      break;
+    case EfiCpuFlushTypeInvalidate:
+      InvalidateDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
+      break;
+    case EfiCpuFlushTypeWriteBackInvalidate:
+      WriteBackInvalidateDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
+      break;
+    default:
+      return EFI_INVALID_PARAMETER;
+  }
+
+  return EFI_SUCCESS;
+}
+
+/**
+  This function enables interrupt processing by the processor.
+
+  @param  This             The EFI_CPU_ARCH_PROTOCOL instance.
+
+  @retval EFI_SUCCESS           Interrupts are enabled on the processor.
+  @retval EFI_DEVICE_ERROR      Interrupts could not be enabled on the processor.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuEnableInterrupt (
+  IN EFI_CPU_ARCH_PROTOCOL  *This
+  )
+{
+  EnableInterrupts ();
+
+  return EFI_SUCCESS;
+}
+
+/**
+  This function disables interrupt processing by the processor.
+
+  @param  This             The EFI_CPU_ARCH_PROTOCOL instance.
+
+  @retval EFI_SUCCESS           Interrupts are disabled on the processor.
+  @retval EFI_DEVICE_ERROR      Interrupts could not be disabled on the processor.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuDisableInterrupt (
+  IN EFI_CPU_ARCH_PROTOCOL  *This
+  )
+{
+  DisableInterrupts ();
+
+  return EFI_SUCCESS;
+}
+
+/**
+  This function retrieves the processor's current interrupt state a returns it in
+  State. If interrupts are currently enabled, then TRUE is returned. If interrupts
+  are currently disabled, then FALSE is returned.
+
+  @param  This             The EFI_CPU_ARCH_PROTOCOL instance.
+  @param  State            A pointer to the processor's current interrupt state. Set to TRUE if
+                           interrupts are enabled and FALSE if interrupts are disabled.
+
+  @retval EFI_SUCCESS           The processor's current interrupt state was returned in State.
+  @retval EFI_INVALID_PARAMETER State is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetInterruptState (
+  IN  EFI_CPU_ARCH_PROTOCOL  *This,
+  OUT BOOLEAN                *State
+  )
+{
+  if (State == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  *State = GetInterruptState ();
+  return EFI_SUCCESS;
+}
+
+/**
+  This function generates an INIT on the processor. If this function succeeds, then the
+  processor will be reset, and control will not be returned to the caller. If InitType is
+  not supported by this processor, or the processor cannot programmatically generate an
+  INIT without help from external hardware, then EFI_UNSUPPORTED is returned. If an error
+  occurs attempting to generate an INIT, then EFI_DEVICE_ERROR is returned.
+
+  @param  This             The EFI_CPU_ARCH_PROTOCOL instance.
+  @param  InitType         The type of processor INIT to perform.
+
+  @retval EFI_SUCCESS           The processor INIT was performed. This return code should never be seen.
+  @retval EFI_UNSUPPORTED       The processor INIT operation specified by InitType is not supported
+                                by this processor.
+  @retval EFI_DEVICE_ERROR      The processor INIT failed.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuInit (
+  IN EFI_CPU_ARCH_PROTOCOL  *This,
+  IN EFI_CPU_INIT_TYPE      InitType
+  )
+{
+  return EFI_UNSUPPORTED;
+}
+
+/**
+  Registers a function to be called from the CPU interrupt handler.
+
+  @param  This                   Protocol instance structure
+  @param  InterruptType          Defines which interrupt to hook. IA-32
+                                 valid range is 0x00 through 0xFF
+  @param  InterruptHandler       A pointer to a function of type
+                                 EFI_CPU_INTERRUPT_HANDLER that is called
+                                 when a processor interrupt occurs.  A null
+                                 pointer is an error condition.
+
+  @retval EFI_SUCCESS            If handler installed or uninstalled.
+  @retval EFI_ALREADY_STARTED    InterruptHandler is not NULL, and a handler
+                                 for InterruptType was previously installed.
+  @retval EFI_INVALID_PARAMETER  InterruptHandler is NULL, and a handler for
+                                 InterruptType was not previously installed.
+  @retval EFI_UNSUPPORTED        The interrupt specified by InterruptType
+                                 is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuRegisterInterruptHandler (
+  IN EFI_CPU_ARCH_PROTOCOL      *This,
+  IN EFI_EXCEPTION_TYPE         InterruptType,
+  IN EFI_CPU_INTERRUPT_HANDLER  InterruptHandler
+  )
+{
+  return RegisterInterruptHandler (InterruptType, InterruptHandler);
+}
+
+/**
+  Returns a timer value from one of the CPU's internal timers. There is no
+  inherent time interval between ticks but is a function of the CPU frequency.
+
+  @param  This                - Protocol instance structure.
+  @param  TimerIndex          - Specifies which CPU timer is requested.
+  @param  TimerValue          - Pointer to the returned timer value.
+  @param  TimerPeriod         - A pointer to the amount of time that passes
+                                in femtoseconds (10-15) for each increment
+                                of TimerValue. If TimerValue does not
+                                increment at a predictable rate, then 0 is
+                                returned.  The amount of time that has
+                                passed between two calls to GetTimerValue()
+                                can be calculated with the formula
+                                (TimerValue2 - TimerValue1) * TimerPeriod.
+                                This parameter is optional and may be NULL.
+
+  @retval EFI_SUCCESS           - If the CPU timer count was returned.
+  @retval EFI_UNSUPPORTED       - If the CPU does not have any readable timers.
+  @retval EFI_DEVICE_ERROR      - If an error occurred while reading the timer.
+  @retval EFI_INVALID_PARAMETER - TimerIndex is not valid or TimerValue is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetTimerValue (
+  IN  EFI_CPU_ARCH_PROTOCOL  *This,
+  IN  UINT32                 TimerIndex,
+  OUT UINT64                 *TimerValue,
+  OUT UINT64                 *TimerPeriod   OPTIONAL
+  )
+{
+  UINT64  BeginValue;
+  UINT64  EndValue;
+
+  if (TimerValue == NULL) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  if (TimerIndex != 0) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  *TimerValue = AsmReadStableCounter ();
+
+  if (TimerPeriod != NULL) {
+    if (mTimerPeriod == 0) {
+      //
+      // Read time stamp counter before and after delay of 100 microseconds
+      //
+      BeginValue = AsmReadStableCounter ();
+      MicroSecondDelay (100);
+      EndValue = AsmReadStableCounter ();
+      //
+      // Calculate the actual frequency
+      //
+      mTimerPeriod = DivU64x64Remainder (
+                       MultU64x32 (
+                         1000 * 1000 * 1000,
+                         100
+                         ),
+                       EndValue - BeginValue,
+                       NULL
+                       );
+    }
+
+    *TimerPeriod = mTimerPeriod;
+  }
+
+  return EFI_SUCCESS;
+}
+
+/**
+  This function modifies the attributes for the memory region specified by BaseAddress and
+  Length from their current attributes to the attributes specified by Attributes.
+
+  @param  This             The EFI_CPU_ARCH_PROTOCOL instance.
+  @param  BaseAddress      The physical address that is the start address of a memory region.
+  @param  Length           The size in bytes of the memory region.
+  @param  EfiAttributes    The bit mask of attributes to set for the memory region.
+
+  @retval EFI_SUCCESS           The attributes were set for the memory region.
+  @retval EFI_ACCESS_DENIED     The attributes for the memory resource range specified by
+                                BaseAddress and Length cannot be modified.
+  @retval EFI_INVALID_PARAMETER Length is zero.
+  @retval EFI_OUT_OF_RESOURCES  There are not enough system resources to modify the attributes of
+                                the memory resource range.
+  @retval EFI_UNSUPPORTED       The processor does not support one or more bytes of the memory
+                                resource range specified by BaseAddress and Length.
+                                The bit mask of attributes is not support for the memory resource
+                                range specified by BaseAddress and Length.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuSetMemoryAttributes (
+  IN EFI_CPU_ARCH_PROTOCOL  *This,
+  IN EFI_PHYSICAL_ADDRESS   BaseAddress,
+  IN UINT64                 Length,
+  IN UINT64                 EfiAttributes
+  )
+{
+  EFI_STATUS  Status;
+
+  Status = EFI_SUCCESS;
+
+  if ((BaseAddress & (EFI_PAGE_SIZE - 1)) != 0) {
+    //
+    // Minimum granularity is SIZE_4KB.
+    //
+    DEBUG ((
+      DEBUG_INFO,
+      "CpuSetMemoryAttributes(%lx, %lx, %lx): Minimum granularity is SIZE_4KB\n",
+      BaseAddress,
+      Length,
+      EfiAttributes
+      ));
+
+    Status = EFI_UNSUPPORTED;
+
+    return Status;
+  }
+
+  Status = SetMemoryRegionAttributes (BaseAddress, Length, EfiAttributes, 0x0);
+
+  ASSERT_EFI_ERROR (Status);
+
+  return Status;
+}
+
+/**
+  Callback function for idle events.
+
+  @param  Event                 Event whose notification function is being invoked.
+  @param  Context               The pointer to the notification function's context,
+                                which is implementation-dependent.
+
+**/
+VOID
+EFIAPI
+IdleLoopEventCallback (
+  IN EFI_EVENT  Event,
+  IN VOID       *Context
+  )
+{
+  CpuSleep ();
+}
+
+/**
+  Initialize the state information for the CPU Architectural Protocol.
+
+  @param ImageHandle     Image handle this driver.
+  @param SystemTable     Pointer to the System Table.
+
+  @retval EFI_SUCCESS           Thread can be successfully created
+  @retval EFI_OUT_OF_RESOURCES  Cannot allocate protocol data structure
+  @retval EFI_DEVICE_ERROR      Cannot create the thread
+
+**/
+EFI_STATUS
+InitializeCpu (
+  IN EFI_HANDLE        ImageHandle,
+  IN EFI_SYSTEM_TABLE  *SystemTable
+  )
+{
+  EFI_STATUS  Status;
+  EFI_EVENT   IdleLoopEvent;
+
+  InitializeExceptions (&gCpu);
+
+  Status = gBS->InstallMultipleProtocolInterfaces (
+                  &mCpuHandle,
+                  &gEfiCpuArchProtocolGuid,
+                  &gCpu,
+                  NULL
+                  );
+  ASSERT_EFI_ERROR (Status);
+
+  Status = gCpu.RegisterInterruptHandler (
+                  &gCpu,
+                  EXCEPT_LOONGARCH_INT_IPI,
+                  IpiInterruptHandler
+                  );
+  ASSERT_EFI_ERROR (Status);
+
+  //
+  // Setup a callback for idle events
+  //
+  Status = gBS->CreateEventEx (
+                  EVT_NOTIFY_SIGNAL,
+                  TPL_NOTIFY,
+                  IdleLoopEventCallback,
+                  NULL,
+                  &gIdleLoopEventGuid,
+                  &IdleLoopEvent
+                  );
+  ASSERT_EFI_ERROR (Status);
+
+  InitializeMpSupport ();
+
+  return Status;
+}
diff --git a/UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.h b/UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.h
new file mode 100644
index 0000000000..8bfbfa3442
--- /dev/null
+++ b/UefiCpuPkg/CpuDxe/LoongArch64/CpuDxe.h
@@ -0,0 +1,288 @@
+/** @file CpuDxe.c
+
+  CPU DXE Module to produce CPU ARCH Protocol.
+
+  Copyright (c) 2024, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef CPU_DXE_H_
+#define CPU_DXE_H_
+
+#include <Uefi.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/CacheMaintenanceLib.h>
+#include <Library/CpuLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/MpInitLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PeCoffGetEntryPointLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+
+#include <Guid/DebugImageInfoTable.h>
+#include <Protocol/Cpu.h>
+#include <Protocol/DebugSupport.h>
+#include <Protocol/LoadedImage.h>
+
+//
+// For coding convenience, define the maximum valid
+// LoongArch exception.
+// Since UEFI V2.11, it will be present in DebugSupport.h.
+//
+#define MAX_LOONGARCH_EXCEPTION  64
+
+/*
+  This function flushes the range of addresses from Start to Start+Length
+  from the processor's data cache. If Start is not aligned to a cache line
+  boundary, then the bytes before Start to the preceding cache line boundary
+  are also flushed. If Start+Length is not aligned to a cache line boundary,
+  then the bytes past Start+Length to the end of the next cache line boundary
+  are also flushed. The FlushType of EfiCpuFlushTypeWriteBackInvalidate must be
+  supported. If the data cache is fully coherent with all DMA operations, then
+  this function can just return EFI_SUCCESS. If the processor does not support
+  flushing a range of the data cache, then the entire data cache can be flushed.
+
+  @param  This             The EFI_CPU_ARCH_PROTOCOL instance.
+  @param  Start            The beginning physical address to flush from the processor's data
+                           cache.
+  @param  Length           The number of bytes to flush from the processor's data cache. This
+                           function may flush more bytes than Length specifies depending upon
+                           the granularity of the flush operation that the processor supports.
+  @param  FlushType        Specifies the type of flush operation to perform.
+
+  @retval EFI_SUCCESS           The address range from Start to Start+Length was flushed from
+                                the processor's data cache.
+  @retval EFI_UNSUPPORTEDT      The processor does not support the cache flush type specified
+                                by FlushType.
+  @retval EFI_DEVICE_ERROR      The address range from Start to Start+Length could not be flushed
+                                from the processor's data cache.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuFlushCpuDataCache (
+  IN EFI_CPU_ARCH_PROTOCOL  *This,
+  IN EFI_PHYSICAL_ADDRESS   Start,
+  IN UINT64                 Length,
+  IN EFI_CPU_FLUSH_TYPE     FlushType
+  );
+
+/**
+  This function enables interrupt processing by the processor.
+
+  @param  This             The EFI_CPU_ARCH_PROTOCOL instance.
+
+  @retval EFI_SUCCESS           Interrupts are enabled on the processor.
+  @retval EFI_DEVICE_ERROR      Interrupts could not be enabled on the processor.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuEnableInterrupt (
+  IN EFI_CPU_ARCH_PROTOCOL  *This
+  );
+
+/**
+  This function disables interrupt processing by the processor.
+
+  @param  This             The EFI_CPU_ARCH_PROTOCOL instance.
+
+  @retval EFI_SUCCESS           Interrupts are disabled on the processor.
+  @retval EFI_DEVICE_ERROR      Interrupts could not be disabled on the processor.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuDisableInterrupt (
+  IN EFI_CPU_ARCH_PROTOCOL  *This
+  );
+
+/**
+  This function retrieves the processor's current interrupt state a returns it in
+  State. If interrupts are currently enabled, then TRUE is returned. If interrupts
+  are currently disabled, then FALSE is returned.
+
+  @param  This             The EFI_CPU_ARCH_PROTOCOL instance.
+  @param  State            A pointer to the processor's current interrupt state. Set to TRUE if
+                           interrupts are enabled and FALSE if interrupts are disabled.
+
+  @retval EFI_SUCCESS           The processor's current interrupt state was returned in State.
+  @retval EFI_INVALID_PARAMETER State is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetInterruptState (
+  IN  EFI_CPU_ARCH_PROTOCOL  *This,
+  OUT BOOLEAN                *State
+  );
+
+/**
+  This function generates an INIT on the processor. If this function succeeds, then the
+  processor will be reset, and control will not be returned to the caller. If InitType is
+  not supported by this processor, or the processor cannot programmatically generate an
+  INIT without help from external hardware, then EFI_UNSUPPORTED is returned. If an error
+  occurs attempting to generate an INIT, then EFI_DEVICE_ERROR is returned.
+
+  @param  This             The EFI_CPU_ARCH_PROTOCOL instance.
+  @param  InitType         The type of processor INIT to perform.
+
+  @retval EFI_SUCCESS           The processor INIT was performed. This return code should never be seen.
+  @retval EFI_UNSUPPORTED       The processor INIT operation specified by InitType is not supported
+                                by this processor.
+  @retval EFI_DEVICE_ERROR      The processor INIT failed.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuInit (
+  IN EFI_CPU_ARCH_PROTOCOL  *This,
+  IN EFI_CPU_INIT_TYPE      InitType
+  );
+
+/**
+  Registers a function to be called from the CPU interrupt handler.
+
+  @param  This                   Protocol instance structure
+  @param  InterruptType          Defines which interrupt to hook. IA-32
+                                 valid range is 0x00 through 0xFF
+  @param  InterruptHandler       A pointer to a function of type
+                                 EFI_CPU_INTERRUPT_HANDLER that is called
+                                 when a processor interrupt occurs.  A null
+                                 pointer is an error condition.
+
+  @retval EFI_SUCCESS            If handler installed or uninstalled.
+  @retval EFI_ALREADY_STARTED    InterruptHandler is not NULL, and a handler
+                                 for InterruptType was previously installed.
+  @retval EFI_INVALID_PARAMETER  InterruptHandler is NULL, and a handler for
+                                 InterruptType was not previously installed.
+  @retval EFI_UNSUPPORTED        The interrupt specified by InterruptType
+                                 is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuRegisterInterruptHandler (
+  IN EFI_CPU_ARCH_PROTOCOL      *This,
+  IN EFI_EXCEPTION_TYPE         InterruptType,
+  IN EFI_CPU_INTERRUPT_HANDLER  InterruptHandler
+  );
+
+/**
+  Returns a timer value from one of the CPU's internal timers. There is no
+  inherent time interval between ticks but is a function of the CPU frequency.
+
+  @param  This                - Protocol instance structure.
+  @param  TimerIndex          - Specifies which CPU timer is requested.
+  @param  TimerValue          - Pointer to the returned timer value.
+  @param  TimerPeriod         - A pointer to the amount of time that passes
+                                in femtoseconds (10-15) for each increment
+                                of TimerValue. If TimerValue does not
+                                increment at a predictable rate, then 0 is
+                                returned.  The amount of time that has
+                                passed between two calls to GetTimerValue()
+                                can be calculated with the formula
+                                (TimerValue2 - TimerValue1) * TimerPeriod.
+                                This parameter is optional and may be NULL.
+
+  @retval EFI_SUCCESS           - If the CPU timer count was returned.
+  @retval EFI_UNSUPPORTED       - If the CPU does not have any readable timers.
+  @retval EFI_DEVICE_ERROR      - If an error occurred while reading the timer.
+  @retval EFI_INVALID_PARAMETER - TimerIndex is not valid or TimerValue is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuGetTimerValue (
+  IN  EFI_CPU_ARCH_PROTOCOL  *This,
+  IN  UINT32                 TimerIndex,
+  OUT UINT64                 *TimerValue,
+  OUT UINT64                 *TimerPeriod   OPTIONAL
+  );
+
+/**
+  This function registers and enables the handler specified by InterruptHandler for a processor
+  interrupt or exception type specified by InterruptType. If InterruptHandler is NULL, then the
+  handler for the processor interrupt or exception type specified by InterruptType is uninstalled.
+  The installed handler is called once for each processor interrupt or exception.
+
+  @param  InterruptType    A pointer to the processor's current interrupt state. Set to TRUE if interrupts
+                           are enabled and FALSE if interrupts are disabled.
+  @param  InterruptHandler A pointer to a function of type EFI_CPU_INTERRUPT_HANDLER that is called
+                           when a processor interrupt occurs. If this parameter is NULL, then the handler
+                           will be uninstalled.
+
+  @retval EFI_SUCCESS           The handler for the processor interrupt was successfully installed or uninstalled.
+  @retval EFI_ALREADY_STARTED   InterruptHandler is not NULL, and a handler for InterruptType was
+                                previously installed.
+  @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for InterruptType was not
+                                previously installed.
+  @retval EFI_UNSUPPORTED       The interrupt specified by InterruptType is not supported.
+
+**/
+EFI_STATUS
+RegisterInterruptHandler (
+  IN EFI_EXCEPTION_TYPE         InterruptType,
+  IN EFI_CPU_INTERRUPT_HANDLER  InterruptHandler
+  );
+
+/**
+  This function modifies the attributes for the memory region specified by BaseAddress and
+  Length from their current attributes to the attributes specified by Attributes.
+
+  @param  This             The EFI_CPU_ARCH_PROTOCOL instance.
+  @param  BaseAddress      The physical address that is the start address of a memory region.
+  @param  Length           The size in bytes of the memory region.
+  @param  Attributes       The bit mask of attributes to set for the memory region.
+
+  @retval EFI_SUCCESS           The attributes were set for the memory region.
+  @retval EFI_ACCESS_DENIED     The attributes for the memory resource range specified by
+                                BaseAddress and Length cannot be modified.
+  @retval EFI_INVALID_PARAMETER Length is zero.
+  @retval EFI_OUT_OF_RESOURCES  There are not enough system resources to modify the attributes of
+                                the memory resource range.
+  @retval EFI_UNSUPPORTED       The processor does not support one or more bytes of the memory
+                                resource range specified by BaseAddress and Length.
+                                The bit mask of attributes is not support for the memory resource
+                                range specified by BaseAddress and Length.
+
+**/
+EFI_STATUS
+EFIAPI
+CpuSetMemoryAttributes (
+  IN EFI_CPU_ARCH_PROTOCOL  *This,
+  IN EFI_PHYSICAL_ADDRESS   BaseAddress,
+  IN UINT64                 Length,
+  IN UINT64                 Attributes
+  );
+
+/**
+  Initialize interrupt handling for DXE phase.
+
+  @param  Cpu A pointer of EFI_CPU_ARCH_PROTOCOL instance.
+
+  @return VOID.
+
+**/
+VOID
+InitializeExceptions (
+  IN EFI_CPU_ARCH_PROTOCOL  *gCpu
+  );
+
+/**
+  Converts EFI Attributes to corresponding architecture Attributes.
+
+  @param[in]  EfiAttributes     Efi Attributes.
+
+  @retval  Corresponding architecture attributes.
+**/
+UINTN
+EFIAPI
+EfiAttributeConverse (
+  IN UINTN  EfiAttributes
+  );
+
+#endif // CPU_DXE_H_
diff --git a/UefiCpuPkg/CpuDxe/LoongArch64/CpuMp.c b/UefiCpuPkg/CpuDxe/LoongArch64/CpuMp.c
new file mode 100644
index 0000000000..3325914e53
--- /dev/null
+++ b/UefiCpuPkg/CpuDxe/LoongArch64/CpuMp.c
@@ -0,0 +1,544 @@
+/** @file
+  CPU DXE Module to produce CPU MP Protocol.
+
+  Copyright (c) 2024, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include "CpuDxe.h"
+#include "CpuMp.h"
+
+EFI_HANDLE  mMpServiceHandle    = NULL;
+UINTN       mNumberOfProcessors = 1;
+
+EFI_MP_SERVICES_PROTOCOL  mMpServicesTemplate = {
+  GetNumberOfProcessors,
+  GetProcessorInfo,
+  StartupAllAPs,
+  StartupThisAP,
+  SwitchBSP,
+  EnableDisableAP,
+  WhoAmI
+};
+
+/**
+  This service retrieves the number of logical processor in the platform
+  and the number of those logical processors that are enabled on this boot.
+  This service may only be called from the BSP.
+
+  This function is used to retrieve the following information:
+    - The number of logical processors that are present in the system.
+    - The number of enabled logical processors in the system at the instant
+      this call is made.
+
+  Because MP Service Protocol provides services to enable and disable processors
+  dynamically, the number of enabled logical processors may vary during the
+  course of a boot session.
+
+  If this service is called from an AP, then EFI_DEVICE_ERROR is returned.
+  If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then
+  EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors
+  is returned in NumberOfProcessors, the number of currently enabled processor
+  is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned.
+
+  @param[in]  This                        A pointer to the EFI_MP_SERVICES_PROTOCOL
+                                          instance.
+  @param[out] NumberOfProcessors          Pointer to the total number of logical
+                                          processors in the system, including the BSP
+                                          and disabled APs.
+  @param[out] NumberOfEnabledProcessors   Pointer to the number of enabled logical
+                                          processors that exist in system, including
+                                          the BSP.
+
+  @retval EFI_SUCCESS             The number of logical processors and enabled
+                                  logical processors was retrieved.
+  @retval EFI_DEVICE_ERROR        The calling processor is an AP.
+  @retval EFI_INVALID_PARAMETER   NumberOfProcessors is NULL.
+  @retval EFI_INVALID_PARAMETER   NumberOfEnabledProcessors is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+GetNumberOfProcessors (
+  IN  EFI_MP_SERVICES_PROTOCOL  *This,
+  OUT UINTN                     *NumberOfProcessors,
+  OUT UINTN                     *NumberOfEnabledProcessors
+  )
+{
+  if ((NumberOfProcessors == NULL) || (NumberOfEnabledProcessors == NULL)) {
+    return EFI_INVALID_PARAMETER;
+  }
+
+  return MpInitLibGetNumberOfProcessors (
+           NumberOfProcessors,
+           NumberOfEnabledProcessors
+           );
+}
+
+/**
+  Gets detailed MP-related information on the requested processor at the
+  instant this call is made. This service may only be called from the BSP.
+
+  This service retrieves detailed MP-related information about any processor
+  on the platform. Note the following:
+    - The processor information may change during the course of a boot session.
+    - The information presented here is entirely MP related.
+
+  Information regarding the number of caches and their sizes, frequency of operation,
+  slot numbers is all considered platform-related information and is not provided
+  by this service.
+
+  @param[in]  This                  A pointer to the EFI_MP_SERVICES_PROTOCOL
+                                    instance.
+  @param[in]  ProcessorNumber       The handle number of processor.
+  @param[out] ProcessorInfoBuffer   A pointer to the buffer where information for
+                                    the requested processor is deposited.
+
+  @retval EFI_SUCCESS             Processor information was returned.
+  @retval EFI_DEVICE_ERROR        The calling processor is an AP.
+  @retval EFI_INVALID_PARAMETER   ProcessorInfoBuffer is NULL.
+  @retval EFI_NOT_FOUND           The processor with the handle specified by
+                                  ProcessorNumber does not exist in the platform.
+
+**/
+EFI_STATUS
+EFIAPI
+GetProcessorInfo (
+  IN  EFI_MP_SERVICES_PROTOCOL   *This,
+  IN  UINTN                      ProcessorNumber,
+  OUT EFI_PROCESSOR_INFORMATION  *ProcessorInfoBuffer
+  )
+{
+  return MpInitLibGetProcessorInfo (ProcessorNumber, ProcessorInfoBuffer, NULL);
+}
+
+/**
+  This service executes a caller provided function on all enabled APs. APs can
+  run either simultaneously or one at a time in sequence. This service supports
+  both blocking and non-blocking requests. The non-blocking requests use EFI
+  events so the BSP can detect when the APs have finished. This service may only
+  be called from the BSP.
+
+  This function is used to dispatch all the enabled APs to the function specified
+  by Procedure.  If any enabled AP is busy, then EFI_NOT_READY is returned
+  immediately and Procedure is not started on any AP.
+
+  If SingleThread is TRUE, all the enabled APs execute the function specified by
+  Procedure one by one, in ascending order of processor handle number. Otherwise,
+  all the enabled APs execute the function specified by Procedure simultaneously.
+
+  If WaitEvent is NULL, execution is in blocking mode. The BSP waits until all
+  APs finish or TimeoutInMicroseconds expires. Otherwise, execution is in non-blocking
+  mode, and the BSP returns from this service without waiting for APs. If a
+  non-blocking mode is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT
+  is signaled, then EFI_UNSUPPORTED must be returned.
+
+  If the timeout specified by TimeoutInMicroseconds expires before all APs return
+  from Procedure, then Procedure on the failed APs is terminated. All enabled APs
+  are always available for further calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+  and EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). If FailedCpuList is not NULL, its
+  content points to the list of processor handle numbers in which Procedure was
+  terminated.
+
+  Note: It is the responsibility of the consumer of the EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+  to make sure that the nature of the code that is executed on the BSP and the
+  dispatched APs is well controlled. The MP Services Protocol does not guarantee
+  that the Procedure function is MP-safe. Hence, the tasks that can be run in
+  parallel are limited to certain independent tasks and well-controlled exclusive
+  code. EFI services and protocols may not be called by APs unless otherwise
+  specified.
+
+  In blocking execution mode, BSP waits until all APs finish or
+  TimeoutInMicroseconds expires.
+
+  In non-blocking execution mode, BSP is freed to return to the caller and then
+  proceed to the next task without having to wait for APs. The following
+  sequence needs to occur in a non-blocking execution mode:
+
+    -# The caller that intends to use this MP Services Protocol in non-blocking
+       mode creates WaitEvent by calling the EFI CreateEvent() service.  The caller
+       invokes EFI_MP_SERVICES_PROTOCOL.StartupAllAPs(). If the parameter WaitEvent
+       is not NULL, then StartupAllAPs() executes in non-blocking mode. It requests
+       the function specified by Procedure to be started on all the enabled APs,
+       and releases the BSP to continue with other tasks.
+    -# The caller can use the CheckEvent() and WaitForEvent() services to check
+       the state of the WaitEvent created in step 1.
+    -# When the APs complete their task or TimeoutInMicroSecondss expires, the MP
+       Service signals WaitEvent by calling the EFI SignalEvent() function. If
+       FailedCpuList is not NULL, its content is available when WaitEvent is
+       signaled. If all APs returned from Procedure prior to the timeout, then
+       FailedCpuList is set to NULL. If not all APs return from Procedure before
+       the timeout, then FailedCpuList is filled in with the list of the failed
+       APs. The buffer is allocated by MP Service Protocol using AllocatePool().
+       It is the caller's responsibility to free the buffer with FreePool() service.
+    -# This invocation of SignalEvent() function informs the caller that invoked
+       EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() that either all the APs completed
+       the specified task or a timeout occurred. The contents of FailedCpuList
+       can be examined to determine which APs did not complete the specified task
+       prior to the timeout.
+
+  @param[in]  This                    A pointer to the EFI_MP_SERVICES_PROTOCOL
+                                      instance.
+  @param[in]  Procedure               A pointer to the function to be run on
+                                      enabled APs of the system. See type
+                                      EFI_AP_PROCEDURE.
+  @param[in]  SingleThread            If TRUE, then all the enabled APs execute
+                                      the function specified by Procedure one by
+                                      one, in ascending order of processor handle
+                                      number.  If FALSE, then all the enabled APs
+                                      execute the function specified by Procedure
+                                      simultaneously.
+  @param[in]  WaitEvent               The event created by the caller with CreateEvent()
+                                      service.  If it is NULL, then execute in
+                                      blocking mode. BSP waits until all APs finish
+                                      or TimeoutInMicroseconds expires.  If it's
+                                      not NULL, then execute in non-blocking mode.
+                                      BSP requests the function specified by
+                                      Procedure to be started on all the enabled
+                                      APs, and go on executing immediately. If
+                                      all return from Procedure, or TimeoutInMicroseconds
+                                      expires, this event is signaled. The BSP
+                                      can use the CheckEvent() or WaitForEvent()
+                                      services to check the state of event.  Type
+                                      EFI_EVENT is defined in CreateEvent() in
+                                      the Unified Extensible Firmware Interface
+                                      Specification.
+  @param[in]  TimeoutInMicroseconds   Indicates the time limit in microseconds for
+                                      APs to return from Procedure, either for
+                                      blocking or non-blocking mode. Zero means
+                                      infinity.  If the timeout expires before
+                                      all APs return from Procedure, then Procedure
+                                      on the failed APs is terminated. All enabled
+                                      APs are available for next function assigned
+                                      by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+                                      or EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+                                      If the timeout expires in blocking mode,
+                                      BSP returns EFI_TIMEOUT.  If the timeout
+                                      expires in non-blocking mode, WaitEvent
+                                      is signaled with SignalEvent().
+  @param[in]  ProcedureArgument       The parameter passed into Procedure for
+                                      all APs.
+  @param[out] FailedCpuList           If NULL, this parameter is ignored. Otherwise,
+                                      if all APs finish successfully, then its
+                                      content is set to NULL. If not all APs
+                                      finish before timeout expires, then its
+                                      content is set to address of the buffer
+                                      holding handle numbers of the failed APs.
+                                      The buffer is allocated by MP Service Protocol,
+                                      and it's the caller's responsibility to
+                                      free the buffer with FreePool() service.
+                                      In blocking mode, it is ready for consumption
+                                      when the call returns. In non-blocking mode,
+                                      it is ready when WaitEvent is signaled.  The
+                                      list of failed CPU is terminated by
+                                      END_OF_CPU_LIST.
+
+  @retval EFI_SUCCESS             In blocking mode, all APs have finished before
+                                  the timeout expired.
+  @retval EFI_SUCCESS             In non-blocking mode, function has been dispatched
+                                  to all enabled APs.
+  @retval EFI_UNSUPPORTED         A non-blocking mode request was made after the
+                                  UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+                                  signaled.
+  @retval EFI_DEVICE_ERROR        Caller processor is AP.
+  @retval EFI_NOT_STARTED         No enabled APs exist in the system.
+  @retval EFI_NOT_READY           Any enabled APs are busy.
+  @retval EFI_TIMEOUT             In blocking mode, the timeout expired before
+                                  all enabled APs have finished.
+  @retval EFI_INVALID_PARAMETER   Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+StartupAllAPs (
+  IN  EFI_MP_SERVICES_PROTOCOL  *This,
+  IN  EFI_AP_PROCEDURE          Procedure,
+  IN  BOOLEAN                   SingleThread,
+  IN  EFI_EVENT                 WaitEvent               OPTIONAL,
+  IN  UINTN                     TimeoutInMicroseconds,
+  IN  VOID                      *ProcedureArgument      OPTIONAL,
+  OUT UINTN                     **FailedCpuList         OPTIONAL
+  )
+{
+  return MpInitLibStartupAllAPs (
+           Procedure,
+           SingleThread,
+           WaitEvent,
+           TimeoutInMicroseconds,
+           ProcedureArgument,
+           FailedCpuList
+           );
+}
+
+/**
+  This service lets the caller get one enabled AP to execute a caller-provided
+  function. The caller can request the BSP to either wait for the completion
+  of the AP or just proceed with the next task by using the EFI event mechanism.
+  See EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() for more details on non-blocking
+  execution support.  This service may only be called from the BSP.
+
+  This function is used to dispatch one enabled AP to the function specified by
+  Procedure passing in the argument specified by ProcedureArgument.  If WaitEvent
+  is NULL, execution is in blocking mode. The BSP waits until the AP finishes or
+  TimeoutInMicroSecondss expires. Otherwise, execution is in non-blocking mode.
+  BSP proceeds to the next task without waiting for the AP. If a non-blocking mode
+  is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled,
+  then EFI_UNSUPPORTED must be returned.
+
+  If the timeout specified by TimeoutInMicroseconds expires before the AP returns
+  from Procedure, then execution of Procedure by the AP is terminated. The AP is
+  available for subsequent calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() and
+  EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+
+  @param[in]  This                    A pointer to the EFI_MP_SERVICES_PROTOCOL
+                                      instance.
+  @param[in]  Procedure               A pointer to the function to be run on the
+                                      designated AP of the system. See type
+                                      EFI_AP_PROCEDURE.
+  @param[in]  ProcessorNumber         The handle number of the AP. The range is
+                                      from 0 to the total number of logical
+                                      processors minus 1. The total number of
+                                      logical processors can be retrieved by
+                                      EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+  @param[in]  WaitEvent               The event created by the caller with CreateEvent()
+                                      service.  If it is NULL, then execute in
+                                      blocking mode. BSP waits until this AP finish
+                                      or TimeoutInMicroSeconds expires.  If it's
+                                      not NULL, then execute in non-blocking mode.
+                                      BSP requests the function specified by
+                                      Procedure to be started on this AP,
+                                      and go on executing immediately. If this AP
+                                      return from Procedure or TimeoutInMicroSeconds
+                                      expires, this event is signaled. The BSP
+                                      can use the CheckEvent() or WaitForEvent()
+                                      services to check the state of event.  Type
+                                      EFI_EVENT is defined in CreateEvent() in
+                                      the Unified Extensible Firmware Interface
+                                      Specification.
+  @param[in]  TimeoutInMicroseconds   Indicates the time limit in microseconds for
+                                      this AP to finish this Procedure, either for
+                                      blocking or non-blocking mode. Zero means
+                                      infinity.  If the timeout expires before
+                                      this AP returns from Procedure, then Procedure
+                                      on the AP is terminated. The
+                                      AP is available for next function assigned
+                                      by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
+                                      or EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
+                                      If the timeout expires in blocking mode,
+                                      BSP returns EFI_TIMEOUT.  If the timeout
+                                      expires in non-blocking mode, WaitEvent
+                                      is signaled with SignalEvent().
+  @param[in]  ProcedureArgument       The parameter passed into Procedure on the
+                                      specified AP.
+  @param[out] Finished                If NULL, this parameter is ignored.  In
+                                      blocking mode, this parameter is ignored.
+                                      In non-blocking mode, if AP returns from
+                                      Procedure before the timeout expires, its
+                                      content is set to TRUE. Otherwise, the
+                                      value is set to FALSE. The caller can
+                                      determine if the AP returned from Procedure
+                                      by evaluating this value.
+
+  @retval EFI_SUCCESS             In blocking mode, specified AP finished before
+                                  the timeout expires.
+  @retval EFI_SUCCESS             In non-blocking mode, the function has been
+                                  dispatched to specified AP.
+  @retval EFI_UNSUPPORTED         A non-blocking mode request was made after the
+                                  UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
+                                  signaled.
+  @retval EFI_DEVICE_ERROR        The calling processor is an AP.
+  @retval EFI_TIMEOUT             In blocking mode, the timeout expired before
+                                  the specified AP has finished.
+  @retval EFI_NOT_READY           The specified AP is busy.
+  @retval EFI_NOT_FOUND           The processor with the handle specified by
+                                  ProcessorNumber does not exist.
+  @retval EFI_INVALID_PARAMETER   ProcessorNumber specifies the BSP or disabled AP.
+  @retval EFI_INVALID_PARAMETER   Procedure is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+StartupThisAP (
+  IN  EFI_MP_SERVICES_PROTOCOL  *This,
+  IN  EFI_AP_PROCEDURE          Procedure,
+  IN  UINTN                     ProcessorNumber,
+  IN  EFI_EVENT                 WaitEvent               OPTIONAL,
+  IN  UINTN                     TimeoutInMicroseconds,
+  IN  VOID                      *ProcedureArgument      OPTIONAL,
+  OUT BOOLEAN                   *Finished               OPTIONAL
+  )
+{
+  return MpInitLibStartupThisAP (
+           Procedure,
+           ProcessorNumber,
+           WaitEvent,
+           TimeoutInMicroseconds,
+           ProcedureArgument,
+           Finished
+           );
+}
+
+/**
+  This service switches the requested AP to be the BSP from that point onward.
+  This service changes the BSP for all purposes.   This call can only be performed
+  by the current BSP.
+
+  This service switches the requested AP to be the BSP from that point onward.
+  This service changes the BSP for all purposes. The new BSP can take over the
+  execution of the old BSP and continue seamlessly from where the old one left
+  off. This service may not be supported after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT
+  is signaled.
+
+  If the BSP cannot be switched prior to the return from this service, then
+  EFI_UNSUPPORTED must be returned.
+
+  @param[in] This              A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
+  @param[in] ProcessorNumber   The handle number of AP that is to become the new
+                               BSP. The range is from 0 to the total number of
+                               logical processors minus 1. The total number of
+                               logical processors can be retrieved by
+                               EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+  @param[in] EnableOldBSP      If TRUE, then the old BSP will be listed as an
+                               enabled AP. Otherwise, it will be disabled.
+
+  @retval EFI_SUCCESS             BSP successfully switched.
+  @retval EFI_UNSUPPORTED         Switching the BSP cannot be completed prior to
+                                  this service returning.
+  @retval EFI_UNSUPPORTED         Switching the BSP is not supported.
+  @retval EFI_DEVICE_ERROR        The calling processor is an AP.
+  @retval EFI_NOT_FOUND           The processor with the handle specified by
+                                  ProcessorNumber does not exist.
+  @retval EFI_INVALID_PARAMETER   ProcessorNumber specifies the current BSP or
+                                  a disabled AP.
+  @retval EFI_NOT_READY           The specified AP is busy.
+
+**/
+EFI_STATUS
+EFIAPI
+SwitchBSP (
+  IN EFI_MP_SERVICES_PROTOCOL  *This,
+  IN  UINTN                    ProcessorNumber,
+  IN  BOOLEAN                  EnableOldBSP
+  )
+{
+  return MpInitLibSwitchBSP (ProcessorNumber, EnableOldBSP);
+}
+
+/**
+  This service lets the caller enable or disable an AP from this point onward.
+  This service may only be called from the BSP.
+
+  This service allows the caller enable or disable an AP from this point onward.
+  The caller can optionally specify the health status of the AP by Health. If
+  an AP is being disabled, then the state of the disabled AP is implementation
+  dependent. If an AP is enabled, then the implementation must guarantee that a
+  complete initialization sequence is performed on the AP, so the AP is in a state
+  that is compatible with an MP operating system. This service may not be supported
+  after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled.
+
+  If the enable or disable AP operation cannot be completed prior to the return
+  from this service, then EFI_UNSUPPORTED must be returned.
+
+  @param[in] This              A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
+  @param[in] ProcessorNumber   The handle number of AP.
+                               The range is from 0 to the total number of
+                               logical processors minus 1. The total number of
+                               logical processors can be retrieved by
+                               EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+  @param[in] EnableAP          Specifies the new state for the processor for
+                               enabled, FALSE for disabled.
+  @param[in] HealthFlag        If not NULL, a pointer to a value that specifies
+                               the new health status of the AP. This flag
+                               corresponds to StatusFlag defined in
+                               EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo(). Only
+                               the PROCESSOR_HEALTH_STATUS_BIT is used. All other
+                               bits are ignored.  If it is NULL, this parameter
+                               is ignored.
+
+  @retval EFI_SUCCESS             The specified AP was enabled or disabled successfully.
+  @retval EFI_UNSUPPORTED         Enabling or disabling an AP cannot be completed
+                                  prior to this service returning.
+  @retval EFI_UNSUPPORTED         Enabling or disabling an AP is not supported.
+  @retval EFI_DEVICE_ERROR        The calling processor is an AP.
+  @retval EFI_NOT_FOUND           Processor with the handle specified by ProcessorNumber
+                                  does not exist.
+  @retval EFI_INVALID_PARAMETER   ProcessorNumber specifies the BSP.
+
+**/
+EFI_STATUS
+EFIAPI
+EnableDisableAP (
+  IN  EFI_MP_SERVICES_PROTOCOL  *This,
+  IN  UINTN                     ProcessorNumber,
+  IN  BOOLEAN                   EnableAP,
+  IN  UINT32                    *HealthFlag OPTIONAL
+  )
+{
+  return MpInitLibEnableDisableAP (ProcessorNumber, EnableAP, HealthFlag);
+}
+
+/**
+  This return the handle number for the calling processor.  This service may be
+  called from the BSP and APs.
+
+  This service returns the processor handle number for the calling processor.
+  The returned value is in the range from 0 to the total number of logical
+  processors minus 1. The total number of logical processors can be retrieved
+  with EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). This service may be
+  called from the BSP and APs. If ProcessorNumber is NULL, then EFI_INVALID_PARAMETER
+  is returned. Otherwise, the current processors handle number is returned in
+  ProcessorNumber, and EFI_SUCCESS is returned.
+
+  @param[in]  This             A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
+  @param[out] ProcessorNumber  Pointer to the handle number of AP.
+                               The range is from 0 to the total number of
+                               logical processors minus 1. The total number of
+                               logical processors can be retrieved by
+                               EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
+
+  @retval EFI_SUCCESS             The current processor handle number was returned
+                                  in ProcessorNumber.
+  @retval EFI_INVALID_PARAMETER   ProcessorNumber is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+WhoAmI (
+  IN EFI_MP_SERVICES_PROTOCOL  *This,
+  OUT UINTN                    *ProcessorNumber
+  )
+{
+  return MpInitLibWhoAmI (ProcessorNumber);
+}
+
+/**
+  Initialize Multi-processor support.
+**/
+VOID
+InitializeMpSupport (
+  VOID
+  )
+{
+  EFI_STATUS  Status;
+  UINTN       NumberOfProcessors;
+  UINTN       NumberOfEnabledProcessors;
+
+  //
+  // Wakeup APs to do initialization
+  //
+  Status = MpInitLibInitialize ();
+  ASSERT_EFI_ERROR (Status);
+
+  MpInitLibGetNumberOfProcessors (&NumberOfProcessors, &NumberOfEnabledProcessors);
+  mNumberOfProcessors = NumberOfProcessors;
+  DEBUG ((DEBUG_INFO, "Detect CPU count: %d\n", mNumberOfProcessors));
+
+  Status = gBS->InstallMultipleProtocolInterfaces (
+                  &mMpServiceHandle,
+                  &gEfiMpServiceProtocolGuid,
+                  &mMpServicesTemplate,
+                  NULL
+                  );
+  ASSERT_EFI_ERROR (Status);
+}
diff --git a/UefiCpuPkg/CpuDxe/LoongArch64/Exception.c b/UefiCpuPkg/CpuDxe/LoongArch64/Exception.c
new file mode 100644
index 0000000000..96def89936
--- /dev/null
+++ b/UefiCpuPkg/CpuDxe/LoongArch64/Exception.c
@@ -0,0 +1,159 @@
+/** @file Exception.c
+
+  CPU DXE Module initialization exception instance.
+
+  Copyright (c) 2024, Loongson Technology Corporation Limited. All rights reserved.<BR>
+
+  SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#include "CpuDxe.h"
+#include <Guid/VectorHandoffTable.h>
+#include <Library/CpuExceptionHandlerLib.h>
+#include <Register/LoongArch64/Csr.h>
+
+VOID
+ExceptionEntryStart (
+  VOID
+  );
+
+VOID
+ExceptionEntryEnd (
+  VOID
+  );
+
+/**
+  This function registers and enables the handler specified by InterruptHandler for a processor
+  interrupt or exception type specified by InterruptType. If InterruptHandler is NULL, then the
+  handler for the processor interrupt or exception type specified by InterruptType is uninstalled.
+  The installed handler is called once for each processor interrupt or exception.
+
+  @param  InterruptType    A pointer to the processor's current interrupt state. Set to TRUE if interrupts
+                           are enabled and FALSE if interrupts are disabled.
+  @param  InterruptHandler A pointer to a function of type EFI_CPU_INTERRUPT_HANDLER that is called
+                           when a processor interrupt occurs. If this parameter is NULL, then the handler
+                           will be uninstalled.
+
+  @retval EFI_SUCCESS           The handler for the processor interrupt was successfully installed or uninstalled.
+  @retval EFI_ALREADY_STARTED   InterruptHandler is not NULL, and a handler for InterruptType was
+                                previously installed.
+  @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for InterruptType was not
+                                previously installed.
+  @retval EFI_UNSUPPORTED       The interrupt specified by InterruptType is not supported.
+
+**/
+EFI_STATUS
+RegisterInterruptHandler (
+  IN EFI_EXCEPTION_TYPE         InterruptType,
+  IN EFI_CPU_INTERRUPT_HANDLER  InterruptHandler
+  )
+{
+  return (EFI_STATUS)RegisterCpuInterruptHandler (InterruptType, InterruptHandler);
+}
+
+/**
+  Update the exception start entry code.
+
+  @retval EFI_SUCCESS           Update the exception start entry code down.
+  @retval EFI_OUT_OF_RESOURCES  The start entry code size out of bounds.
+
+**/
+EFI_STATUS
+EFIAPI
+UpdateExceptionStartEntry (
+  VOID
+  )
+{
+  EFI_PHYSICAL_ADDRESS  ExceptionStartEntry;
+  UINTN                 VectorLength;
+  UINTN                 MaxLength;
+  UINTN                 MaxSizeOfVector;
+
+  VectorLength = (UINTN)ExceptionEntryEnd - (UINTN)ExceptionEntryStart;
+
+  //
+  // A vector is up to 512 bytes.
+  //
+  MaxSizeOfVector = 512;
+  MaxLength       = (MAX_LOONGARCH_EXCEPTION + MAX_LOONGARCH_INTERRUPT) * MaxSizeOfVector;
+
+  if (VectorLength > MaxLength) {
+    return EFI_OUT_OF_RESOURCES;
+  }
+
+  ExceptionStartEntry = PcdGet64 (PcdCpuExceptionVectorBaseAddress);
+
+  InvalidateInstructionCacheRange ((VOID *)ExceptionStartEntry, VectorLength);
+  CopyMem ((VOID *)ExceptionStartEntry, (VOID *)ExceptionEntryStart, VectorLength);
+  InvalidateInstructionCacheRange ((VOID *)ExceptionStartEntry, VectorLength);
+  InvalidateDataCache ();
+
+  //
+  // If PcdCpuExceptionVectorBaseAddress is not used during SEC and PEI stages, the exception
+  // base addres is set to PcdCpuExceptionVectorBaseAddress.
+  //
+  if (CsrRead (LOONGARCH_CSR_EBASE) != ExceptionStartEntry) {
+    SetExceptionBaseAddress (ExceptionStartEntry);
+  }
+
+  return EFI_SUCCESS;
+}
+
+/**
+  Initialize interrupt handling for DXE phase.
+
+  @param  Cpu A pointer of EFI_CPU_ARCH_PROTOCOL instance.
+
+  @return VOID.
+
+**/
+VOID
+InitializeExceptions (
+  IN EFI_CPU_ARCH_PROTOCOL  *Cpu
+  )
+{
+  EFI_STATUS               Status;
+  EFI_VECTOR_HANDOFF_INFO  *VectorInfoList;
+  EFI_VECTOR_HANDOFF_INFO  *VectorInfo;
+  BOOLEAN                  IrqEnabled;
+
+  VectorInfo = (EFI_VECTOR_HANDOFF_INFO *)NULL;
+  Status     = EfiGetSystemConfigurationTable (&gEfiVectorHandoffTableGuid, (VOID **)&VectorInfoList);
+
+  if ((Status == EFI_SUCCESS) && (VectorInfoList != NULL)) {
+    VectorInfo = VectorInfoList;
+  }
+
+  //
+  // Disable interrupts
+  //
+  Cpu->GetInterruptState (Cpu, &IrqEnabled);
+  if (IrqEnabled) {
+    Cpu->DisableInterrupt (Cpu);
+  }
+
+  //
+  // Update the Exception Start Entry code to point into CpuDxe.
+  //
+  Status = UpdateExceptionStartEntry ();
+  if (EFI_ERROR (Status)) {
+    DebugPrint (EFI_D_ERROR, "[%a]: Exception start entry code out of bounds!\n", __func__);
+    ASSERT_EFI_ERROR (Status);
+  }
+
+  //
+  // Intialize the CpuExceptionHandlerLib so we take over the exception vector table from the DXE Core
+  //
+  Status = InitializeCpuExceptionHandlers (VectorInfo);
+  ASSERT_EFI_ERROR (Status);
+
+  //
+  // Enable interrupts
+  //
+  DebugPrint (EFI_D_INFO, "InitializeExceptions,IrqEnabled = %x\n", IrqEnabled);
+  if (!IrqEnabled) {
+    Status = Cpu->EnableInterrupt (Cpu);
+  }
+
+  ASSERT_EFI_ERROR (Status);
+}
--
2.27.0



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#117076): https://edk2.groups.io/g/devel/message/117076
Mute This Topic: https://groups.io/mt/105041106/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-



[-- Attachment #2: Type: text/html, Size: 129624 bytes --]