From: "Ni, Ray" <ray.ni@intel.com>
To: "devel@edk2.groups.io" <devel@edk2.groups.io>,
"Ni, Ray" <ray.ni@intel.com>,
"Liu, Zhiguang" <zhiguang.liu@intel.com>
Cc: "Desimone, Nathaniel L" <nathaniel.l.desimone@intel.com>,
"Kinney, Michael D" <michael.d.kinney@intel.com>
Subject: Re: [edk2-devel] [PATCH 6/6] SimicsOpenBoardPkg: Disable DriverBindingSupport perf logging
Date: Thu, 25 May 2023 02:11:08 +0000 [thread overview]
Message-ID: <MN6PR11MB8244D390D8BE1BA4195EC3B98C469@MN6PR11MB8244.namprd11.prod.outlook.com> (raw)
In-Reply-To: <17621422F0AEB994.8048@groups.io>
Sending to correct address of Zhiguang.
> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Ni, Ray
> Sent: Wednesday, May 24, 2023 8:29 PM
> To: devel@edk2.groups.io
> Cc: Desimone, Nathaniel L <nathaniel.l.desimone@intel.com>; Zhiguang Liu
> <zhiguang@liu@intel.com>; Kinney, Michael D <michael.d.kinney@intel.com>
> Subject: [edk2-devel] [PATCH 6/6] SimicsOpenBoardPkg: Disable
> DriverBindingSupport perf logging
>
> DriverBindingSupport() is called lots of time during post.
> If it's also included in the perf logging, it's very easy to use all
> the FPDT table memory pre-allocated at EndOfDxe because the
> driver binding connect process happens after EndOfDxe.
>
> PcdExtFpdtBootRecordPadSize was added for holding the
> perf-logging records after EndOfDxe. But the DriverBindingSupport
> records are just too many. For example, SimicsOpenBoardPkg has
> to set this PCD to almost 100x bigger than the default value in order
> to hold all the perf-logging records.
>
> Platform developers are usually not aware of missing some records
> after EndOfDxe because those records are all about driverbinding
> support/start/stop. But if we add more perf-logging inside SMM,
> those SMM records will be missed in the final FPDT table because
> DxeCorePerformanceLib collects those SMM records at ReadyToBoot
> event. Since the FPDT cannot hold all driverbinding records, it
> definitely cannot hold those SMM records as well.
>
> So in order to hold all SMM perf loggings, either platform should
> set PcdExtFpdtBootRecordPadSize to a large enough value, or
> as what this patch does, to disable the driverbinding support
> perf-logging.
>
> Signed-off-by: Ray Ni <ray.ni@intel.com>
> Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
> Cc: Zhiguang Liu <zhiguang@liu@intel.com>
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> ---
> .../BoardX58Ich10/OpenBoardPkgPcd.dsc | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git
> a/Platform/Intel/SimicsOpenBoardPkg/BoardX58Ich10/OpenBoardPkgPcd.ds
> c
> b/Platform/Intel/SimicsOpenBoardPkg/BoardX58Ich10/OpenBoardPkgPcd.ds
> c
> index b6672d1a78..6b969ab1f5 100644
> ---
> a/Platform/Intel/SimicsOpenBoardPkg/BoardX58Ich10/OpenBoardPkgPcd.ds
> c
> +++
> b/Platform/Intel/SimicsOpenBoardPkg/BoardX58Ich10/OpenBoardPkgPcd.ds
> c
> @@ -132,7 +132,16 @@
> gEfiMdePkgTokenSpaceGuid.PcdMaximumGuidedExtractHandler|0x10
>
> gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|0x0
>
> !if gMinPlatformPkgTokenSpaceGuid.PcdPerformanceEnable == TRUE
>
> - gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|0x1
>
> + # BIT0 - Enable Performance Measurement.<BR>
>
> + # BIT1 - Disable Start Image Logging.<BR>
>
> + # BIT2 - Disable Load Image logging.<BR>
>
> + # BIT3 - Disable Binding Support logging.<BR>
>
> + # BIT4 - Disable Binding Start logging.<BR>
>
> + # BIT5 - Disable Binding Stop logging.<BR>
>
> + # BIT6 - Disable all other general Perfs.<BR>
>
> + # BIT1-BIT6 are evaluated when BIT0 is set.<BR>
>
> + # Enable performance measurement but disable driver binding support
> logging.
>
> + gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|0x09
>
> !endif
>
> !if $(TARGET) == "RELEASE"
>
> gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x03
>
> --
> 2.39.1.windows.1
>
>
>
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#105235):
> https://edk2.groups.io/g/devel/message/105235
> Mute This Topic: https://groups.io/mt/99107262/1712937
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe:
> https://edk2.groups.io/g/devel/leave/3759105/1712937/893644498/xyzzy
> [ray.ni@intel.com]
> -=-=-=-=-=-=
>
next prev parent reply other threads:[~2023-05-25 2:11 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-24 12:28 [PATCH 0/6] Fine tune SimicsOpenBoardPkg Ni, Ray
2023-05-24 12:28 ` [PATCH 1/6] SimicsOpenBoardPkg: Remove un-used PlatformBootManagerLib Ni, Ray
2023-05-24 12:28 ` [PATCH 2/6] SimicsOpenBoardPkg: Remove logic that loads variable from disk file Ni, Ray
2023-05-24 12:28 ` [PATCH 3/6] SimicsOpenBoardPkg: Enable serial terminal Ni, Ray
2023-05-24 12:28 ` [PATCH 4/6] MinPlatform/build_bios.py: Support performance enabled build Ni, Ray
2023-05-24 23:07 ` Chiu, Chasel
2023-05-25 0:44 ` Ni, Ray
2023-05-24 12:28 ` [PATCH 5/6] SimicsOpenBoardPkg: Add "dp" command in performance build Ni, Ray
2023-05-24 12:28 ` [PATCH 6/6] SimicsOpenBoardPkg: Disable DriverBindingSupport perf logging Ni, Ray
[not found] ` <17621420EF808DC9.12947@groups.io>
2023-05-25 2:10 ` [edk2-devel] [PATCH 1/6] SimicsOpenBoardPkg: Remove un-used PlatformBootManagerLib Ni, Ray
[not found] ` <17621421B6E6FB43.8048@groups.io>
2023-05-25 2:10 ` [edk2-devel] [PATCH 2/6] SimicsOpenBoardPkg: Remove logic that loads variable from disk file Ni, Ray
[not found] ` <17621422F0AEB994.8048@groups.io>
2023-05-25 2:11 ` Ni, Ray [this message]
[not found] ` <176214229D12BE31.8048@groups.io>
2023-05-25 2:11 ` [edk2-devel] [PATCH 5/6] SimicsOpenBoardPkg: Add "dp" command in performance build Ni, Ray
[not found] ` <17621421D3F4CA3E.12947@groups.io>
2023-05-25 2:11 ` [edk2-devel] [PATCH 3/6] SimicsOpenBoardPkg: Enable serial terminal Ni, Ray
2023-05-26 6:36 ` [edk2-devel] [PATCH 0/6] Fine tune SimicsOpenBoardPkg Zhiguang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MN6PR11MB8244D390D8BE1BA4195EC3B98C469@MN6PR11MB8244.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox