From: "Chaganty, Rangasai V" <rangasai.v.chaganty@intel.com>
To: "Kasbekar, Saloni" <saloni.kasbekar@intel.com>,
"devel@edk2.groups.io" <devel@edk2.groups.io>
Cc: "Desimone, Nathaniel L" <nathaniel.l.desimone@intel.com>,
"Chuang, Rosen" <rosen.chuang@intel.com>
Subject: Re: [edk2-devel] [PATCH v2 05/10] AlderlakeSiliconPkg/Include: Add ConfigBlock headers
Date: Fri, 15 Sep 2023 05:42:56 +0000 [thread overview]
Message-ID: <MW4PR11MB57764A8CADF28109188FE794B6F6A@MW4PR11MB5776.namprd11.prod.outlook.com> (raw)
In-Reply-To: <b065ff553121913cb6167abd367e495d30b9bffb.1694752604.git.saloni.kasbekar@intel.com>
Reviewed-by: Sai Chaganty <rangasai.v.chaganty@intel.com>
-----Original Message-----
From: Kasbekar, Saloni <saloni.kasbekar@intel.com>
Sent: Thursday, September 14, 2023 9:46 PM
To: devel@edk2.groups.io
Cc: Kasbekar, Saloni <saloni.kasbekar@intel.com>; Chaganty, Rangasai V <rangasai.v.chaganty@intel.com>; Desimone, Nathaniel L <nathaniel.l.desimone@intel.com>; Chuang, Rosen <rosen.chuang@intel.com>
Subject: [PATCH v2 05/10] AlderlakeSiliconPkg/Include: Add ConfigBlock headers
Adds the header includes for the ConfigBlocks
Cc: Sai Chaganty <rangasai.v.chaganty@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Rosen Chuang <rosen.chuang@intel.com>
Signed-off-by: Saloni Kasbekar <saloni.kasbekar@intel.com>
---
.../CpuPcieRp/Gen3/CpuPcieConfigGen3.h | 48 ++
.../CpuPcieRp/Gen4/CpuPcieConfig.h | 240 ++++++++
.../Include/ConfigBlock/Espi/LpcConfig.h | 38 ++
.../Include/ConfigBlock/Fivr/FivrConfig.h | 183 ++++++
.../Include/ConfigBlock/Gpio/GpioDevConfig.h | 37 ++
.../Graphics/Gen12/GraphicsConfig.h | 212 +++++++
.../HostBridge/Ver1/HostBridgeConfig.h | 58 ++
.../ConfigBlock/Itss/InterruptConfig.h | 38 ++
.../ConfigBlock/Memory/Ver2/MemoryConfig.h | 551 ++++++++++++++++++
.../Include/ConfigBlock/PchDmi/PchDmiConfig.h | 65 +++
.../PcieRp/PchPcieRp/PchPcieRpConfig.h | 180 ++++++
.../Include/ConfigBlock/PcieRp/PcieConfig.h | 408 +++++++++++++
.../ConfigBlock/PcieRp/PciePreMemConfig.h | 36 ++
.../Include/ConfigBlock/Pmc/AdrConfig.h | 76 +++
.../Include/ConfigBlock/Pmc/PmConfig.h | 86 +++
.../Include/ConfigBlock/Rtc/RtcConfig.h | 37 ++
.../ConfigBlock/SerialIo/SerialIoConfig.h | 33 ++
.../Include/ConfigBlock/SiConfig.h | 105 ++++
.../Include/ConfigBlock/SiPreMemConfig.h | 63 ++
.../Include/ConfigBlock/Smbus/SmbusConfig.h | 49 ++
.../ConfigBlock/Spi/FlashProtectionConfig.h | 54 ++
.../Include/ConfigBlock/Tcss/TcssPeiConfig.h | 71 +++
.../Include/ConfigBlock/Vmd/VmdPeiConfig.h | 60 ++
.../Include/ConfigBlock/Wdt/WatchDogConfig.h | 30 +
24 files changed, 2758 insertions(+)
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen3/CpuPcieConfigGen3.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen4/CpuPcieConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Espi/LpcConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Fivr/FivrConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Gpio/GpioDevConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Graphics/Gen12/GraphicsConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/HostBridge/Ver1/HostBridgeConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Itss/InterruptConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Memory/Ver2/MemoryConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PchDmi/PchDmiConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PchPcieRp/PchPcieRpConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PcieConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PciePreMemConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/AdrConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/PmConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Rtc/RtcConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SerialIo/SerialIoConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiPreMemConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Smbus/SmbusConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Spi/FlashProtectionConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Tcss/TcssPeiConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Vmd/VmdPeiConfig.h
create mode 100644 Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Wdt/WatchDogConfig.h
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen3/CpuPcieConfigGen3.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen3/CpuPcieConfigGen3.h
new file mode 100644
index 0000000000..5b437c8311
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen3/CpuPcieConfigGen3.h
@@ -0,0 +1,48 @@
+/** @file
+Pcie root port policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _CPU_PCIE_CONFIG_GEN3_H_
+#define _CPU_PCIE_CONFIG_GEN3_H_
+
+#include <Library/GpioLib.h>
+#include <Library/CpuPcieInfoFruLib.h>
+#include <PcieConfig.h>
+#include <ConfigBlock.h>
+#include <Register/SaRegsHostBridge.h>
+
+#pragma pack(push, 1)
+
+
+#define L0_SET BIT0
+#define L1_SET BIT1
+
+
+///
+/// SA GPIO Data Structure
+///
+typedef struct {
+ GPIO_PAD GpioPad; ///< Offset 0: GPIO Pad
+ UINT8 Value; ///< Offset 4: GPIO Value
+ UINT8 Rsvd0[3]; ///< Offset 5: Reserved for 4 bytes alignment
+ UINT32 Active : 1; ///< Offset 8: 0=Active Low; 1=Active High
+ UINT32 RsvdBits0 : 31;
+} SA_GPIO_INFO_PCIE;
+
+///
+/// SA Board PEG GPIO Info
+///
+typedef struct {
+ SA_GPIO_INFO_PCIE SaPeg0ResetGpio; ///< Offset 0: PEG0 PERST# GPIO assigned, must be a PCH GPIO pin
+ SA_GPIO_INFO_PCIE SaPeg3ResetGpio; ///< Offset 12: PEG3 PERST# GPIO assigned, must be a PCH GPIO pin
+ BOOLEAN GpioSupport; ///< Offset 24: 1=Supported; 0=Not Supported
+ UINT8 Rsvd0[3]; ///< Offset 25: Reserved for 4 bytes alignment
+} PEG_GPIO_DATA;
+
+
+#pragma pack (pop)
+
+#endif // _CPU_PCIE_CONFIG_GEN3_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen4/CpuPcieConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen4/CpuPcieConfig.h
new file mode 100644
index 0000000000..999748d711
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/CpuPcieRp/Gen4/CpuPcieConfig.h
@@ -0,0 +1,240 @@
+/** @file
+ Pcie root port policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _CPU_PCIE_CONFIG_H_
+#define _CPU_PCIE_CONFIG_H_
+
+#include <Library/GpioLib.h>
+#include <Library/CpuPcieInfoFruLib.h>
+#include <PcieConfig.h>
+#include <ConfigBlock.h>
+#include <Register/SaRegsHostBridge.h>
+
+#pragma pack(push, 1)
+
+#define CPU_PCIE_RP_PREMEM_CONFIG_REVISION 1
+
+/**
+ Making any setup structure change after code frozen
+ will need to maintain backward compatibility, bump up
+ structure revision and update below history table\n
+ <b>Revision 1</b>: - Initial version.
+**/
+
+#define CPU_PCIE_CONFIG_REVISION 10
+
+#define L0_SET BIT0
+#define L1_SET BIT1
+
+/**
+ CPU PCIe Root Port Pre-Memory Configuration
+ Contains Root Port settings and capabilities
+ <b>Revision 1</b>: - Initial version.
+ <b>Revision 2</b>: - Adding Dekel Suqelch Workaround Setup Variable
+ <b>Revision 3</b>: - Deprecate Dekel Suqelch Workaround Setup Variable
+ <b>Revision 4</b>: - Adding New FOM Setup Variable
+ <b>Revision 5</b>: - Add CdrRelock Policy to CPU_PCIE_RP_PREMEM_CONFIG.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ Root Port enabling mask.
+ Bit0 presents RP1, Bit1 presents RP2, and so on.
+ 0: Disable; <b>1: Enable</b>.
+ **/
+ UINT32 RpEnabledMask;
+ /**
+ Assertion on Link Down GPIOs
+ - <b>Disabled</b> (0x0) : Disable assertion on Link Down GPIOs(Default)
+ - Enabled (0x1) : Enable assertion on Link Down GPIOs
+ **/
+ UINT8 LinkDownGpios;
+ /**
+ Enable ClockReq Messaging
+ - <b>Disabled</> (0x0) : Disable ClockReq Messaging(Default)
+ - Enabled (0x1) : Enable ClockReq Messaging
+ **/
+ UINT8 ClkReqMsgEnable;
+ /**
+ Dekel Recipe Workaround
+ <b>2</b>
+ 1=Minimal, 9=Maximum,
+ **/
+ UINT8 DekelSquelchWa; // Deprecated variable
+ UINT8 Rsvd0[1];
+ /**
+ Determines each PCIE Port speed capability.
+ <b>0: Auto</b>; 1: Gen1; 2: Gen2; 3: Gen3; 4: Gen4 (see: CPU_PCIE_SPEED)
+ **/
+ UINT8 PcieSpeed[CPU_PCIE_MAX_ROOT_PORTS];
+
+ /**
+ Enable ClockReq Messaging Policy is for all Rootports
+ - <b>Disabled</> (0x0) : Disable ClockReq Messaging(Default)
+ - Enabled (0x1) : Enable ClockReq Messaging
+ **/
+ UINT8 ClkReqMsgEnableRp[CPU_PCIE_MAX_ROOT_PORTS];
+ /**
+ To Enable/Disable New FOM
+ <b>0: Disable</b>; 1: Enable
+ **/
+ UINT8 NewFom[CPU_PCIE_MAX_ROOT_PORTS];
+ /**
+ To Enable/Disable CDR Relock
+ <b>0: Disable</b>; 1: Enable
+ **/
+ UINT8 CdrRelock[CPU_PCIE_MAX_ROOT_PORTS];
+} CPU_PCIE_RP_PREMEM_CONFIG;
+
+/**
+ Represent lane specific PCIe Gen3 equalization parameters.
+**/
+typedef struct {
+ UINT8 Cm; ///< Coefficient C-1
+ UINT8 Cp; ///< Coefficient C+1
+ UINT8 PegGen3RootPortPreset; ///< <b>(Test)</b> Used for programming PEG Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
+ UINT8 PegGen3EndPointPreset; ///< <b>(Test)</b> Used for programming PEG Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
+ UINT8 PegGen3EndPointHint; ///< <b>(Test)</b> Hint value per lane for the PEG Gen3 End Point. Range: 0-6, 2 is default for each lane
+ UINT8 PegGen4RootPortPreset; ///< <b>(Test)</b> Used for programming PEG Gen4 preset values per lane. Range: 0-9, 8 is default for each lane
+ UINT8 PegGen4EndPointPreset; ///< <b>(Test)</b> Used for programming PEG Gen4 preset values per lane. Range: 0-9, 7 is default for each lane
+ UINT8 PegGen4EndPointHint; ///< <b>(Test)</b> Hint value per lane for the PEG Gen4 End Point. Range: 0-6, 2 is default for each lane
+} CPU_PCIE_EQ_LANE_PARAM;
+
+/**
+ The CPU_PCI_ROOT_PORT_CONFIG describe the feature and capability of each CPU PCIe root port.
+**/
+typedef struct {
+
+ UINT32 ExtSync : 1; ///< Indicate whether the extended synch is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 MultiVcEnabled : 1; ///< Multiple Virtual Channel. 0: Disable; <b>1: Enable</b>
+ UINT32 RsvdBits0 : 30; ///< Reserved bits
+ /**
+ PCIe Gen4 Equalization Method
+ - HwEq (0x1) : Hardware Equalization (Default)
+ - StaticEq (0x2) : Static Equalization
+ **/
+ UINT8 Gen4EqPh3Method;
+ UINT8 FomsCp; ///< FOM Score Board Control Policy
+ UINT8 RsvdBytes0[2]; ///< Reserved bytes
+
+ //
+ // Gen3 Equalization settings
+ //
+ UINT32 Gen3Uptp : 4; ///< <b>(Test)</b> Upstream Port Transmitter Preset used during Gen3 Link Equalization. Used for all lanes. Default is <b>7</b>.
+ UINT32 Gen3Dptp : 4; ///< <b>(Test)</b> Downstream Port Transmiter Preset used during Gen3 Link Equalization. Used for all lanes. Default is <b>7</b>.
+ //
+ // Gen4 Equalization settings
+ //
+ UINT32 Gen4Uptp : 4; ///< <b>(Test)</b> Upstream Port Transmitter Preset used during Gen4 Link Equalization. Used for all lanes. Default is <b>7</b>.
+ UINT32 Gen4Dptp : 4; ///< <b>(Test)</b> Downstream Port Transmiter Preset used during Gen4 Link Equalization. Used for all lanes. Default is <b>7</b>.
+ //
+ // Gen5 Equalization settings
+ //
+ UINT32 Gen5Uptp : 4; ///< <b>(Test)</b> Upstream Port Transmitter Preset used during Gen5 Link Equalization. Used for all lanes. Default is <b>5</b>.
+ UINT32 Gen5Dptp : 4; ///< <b>(Test)</b> Downstream Port Transmiter Preset used during Gen5 Link Equalization. Used for all lanes. Default is <b>7</b>.
+ UINT32 RsvdBits1 : 8; ///< Reserved Bits
+
+ PCIE_ROOT_PORT_COMMON_CONFIG PcieRpCommonConfig; ///< <b>(Test)</b> Includes policies which are common to both SA and PCH RootPort
+
+} CPU_PCIE_ROOT_PORT_CONFIG;
+
+typedef struct {
+ UINT8 PcieGen3PresetCoeffSelection; ///<Gen3 Preset or Coefficient Selection
+ UINT8 PcieGen4PresetCoeffSelection; ///<Gen4 Preset or Coefficient Selection
+ UINT8 PcieGen5PresetCoeffSelection; ///<Gen5 Preset or Coefficient Selection
+ UINT8 Func0LinkDisable; ///< Disable Func0 Port
+} CPU_PCIE_ROOT_PORT_CONFIG2;
+
+/**
+ The CPU_PCIE_CONFIG block describes the expected configuration of the CPU PCI Express controllers
+ <b>Revision 1< / b>:
+ -Initial version.
+ <b>Revision 2</b>:
+ - SlotSelection policy added
+ <b>Revision 3</b>
+ - Deprecate PegGen3ProgramStaticEq and PegGen4ProgramStaticEq
+ <b>Revision 4</b>:
+ - Deprecating SetSecuredRegisterLock
+ <b>Revision 5</b>:
+ - Moved ClockGating policy to PCIE_ROOT_PORT_COMMON_CONFIG
+ - Moved PowerGating policy to PCIE_ROOT_PORT_COMMON_CONFIG
+ - Deprecate VcEnabled policy
+ <b>Revision 7</b>:
+ - Deprecating Gen3PresetCoeffSelection and Gen4PresetCoeffSelection
+ <b>Revision 8</b>:
+ - Added Serl policy
+ <b>Revision 9</b>:
+ - Align revision with CPU_PCIE_CONFIG_REVISION value
+ <b>Revision 10</b>:
+ - Deprecate EqPh3LaneParam.Cm and EqPh3LaneParam.Cp
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ ///
+ /// These members describe the configuration of each SA PCIe root port.
+ ///
+ CPU_PCIE_ROOT_PORT_CONFIG RootPort[CPU_PCIE_MAX_ROOT_PORTS];
+ ///
+ /// Gen3 Equalization settings for physical PCIe lane, index 0 represents PCIe lane 1, etc.
+ /// Corresponding entries are used when root port EqPh3Method is PchPcieEqStaticCoeff (default).
+ ///
+ CPU_PCIE_EQ_LANE_PARAM EqPh3LaneParam[SA_PEG_MAX_LANE]; //@ Deprecated Policy
+ ///
+ /// List of coefficients used during equalization (applicable to both software and hardware EQ)
+ ///
+ PCIE_EQ_PARAM HwEqGen4CoeffList[PCIE_HWEQ_COEFFS_MAX]; //@ Deprecated Policy
+
+ PCIE_COMMON_CONFIG PcieCommonConfig; /// < <b>(Test)</b> Includes policies which are common to both SA and PCH PCIe
+
+ UINT32 FiaProgramming : 1; /// < Skip Fia Configuration and lock if enable
+ // Deprecated Policy
+ /**
+ <b>(Test)</b> Program PEG Gen3 EQ Phase1 Static Presets
+ - Disabled (0x0) : Disable EQ Phase1 Static Presets Programming
+ - <b>Enabled</b> (0x1) : Enable EQ Phase1 Static Presets Programming (Default)
+ **/
+ UINT32 PegGen3ProgramStaticEq : 1;
+
+ // Deprecated Policy
+ /**
+ <b>(Test)</b> Program PEG Gen4 EQ Phase1 Static Presets
+ - Disabled (0x0) : Disable EQ Phase1 Static Presets Programming
+ - <b>Enabled</b> (0x1) : Enable EQ Phase1 Static Presets Programming (Default)
+ **/
+ UINT32 PegGen4ProgramStaticEq : 1;
+ /**
+ <b>(Test)</b> Cpu Pcie Secure Register Lock
+ - Disabled (0x0)
+ - <b>Enabled</b> (0x1)
+ **/
+ UINT32 SetSecuredRegisterLock : 1; // Deprecated Policy
+ ///
+ /// This member allows to select between the PCI Express M2 or CEMx4 slot <b>1: PCIe M2</b>; 0: CEMx4 slot.
+ ///
+ UINT32 SlotSelection : 1;
+
+ UINT32 Serl : 1;
+
+ UINT32 RsvdBits0 : 26;
+
+ /**
+ PCIe device override table
+ The PCIe device table is being used to override PCIe device ASPM settings.
+ This is a pointer points to a 32bit address. And it's only used in PostMem phase.
+ Please refer to PCIE_DEVICE_OVERRIDE structure for the table.
+ Last entry VendorId must be 0.
+ The prototype of this policy is:
+ PCIE_DEVICE_OVERRIDE *PcieDeviceOverrideTablePtr;
+ **/
+ UINT32 PcieDeviceOverrideTablePtr;
+ CPU_PCIE_ROOT_PORT_CONFIG2 RootPort2[CPU_PCIE_MAX_ROOT_PORTS];
+ PCIE_COMMON_CONFIG2 PcieCommonConfig2;
+ } CPU_PCIE_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _CPU_PCIE_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Espi/LpcConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Espi/LpcConfig.h
new file mode 100644
index 0000000000..324facde78
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Espi/LpcConfig.h
@@ -0,0 +1,38 @@
+/** @file
+ Lpc policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _LPC_CONFIG_H_
+#define _LPC_CONFIG_H_
+
+#define PCH_LPC_PREMEM_CONFIG_REVISION 1
+extern EFI_GUID gLpcPreMemConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ This structure contains the policies which are related to LPC.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ Enhance the port 8xh decoding.
+ Original LPC only decodes one byte of port 80h, with this enhancement LPC can decode word or dword of port 80h-83h.
+ @note: this will occupy one LPC generic IO range register. While this is enabled, read from port 80h always return 0x00.
+ 0: Disable, <b>1: Enable</b>
+ **/
+ UINT32 EnhancePort8xhDecoding : 1;
+ /**
+ Hardware Autonomous Enable.
+ When enabled, LPC will automatically engage power gating when it has reached its idle condition.
+ 0: Disable, <b>1: Enable</b>
+ **/
+ UINT32 LpcPmHAE : 1;
+ UINT32 RsvdBits : 30; ///< Reserved bits
+} PCH_LPC_PREMEM_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _LPC_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Fivr/FivrConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Fivr/FivrConfig.h
new file mode 100644
index 0000000000..501e00c0e1
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Fivr/FivrConfig.h
@@ -0,0 +1,183 @@
+/** @file
+ PCH FIVR policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _FIVR_CONFIG_H_
+#define _FIVR_CONFIG_H_
+
+/**
+ <b>Revision 1</b>: - Initial version.
+**/
+#define PCH_FIVR_CONFIG_REVISION 1
+extern EFI_GUID gFivrConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ Rail support in S0ix and Sx
+ Settings other than FivrRailDisabled can be OR'ed
+**/
+typedef enum {
+ FivrRailDisabled = 0,
+ FivrRailInS0i1S0i2 = BIT0,
+ FivrRailInS0i3 = BIT1,
+ FivrRailInS3 = BIT2,
+ FivrRailInS4 = BIT3,
+ FivrRailInS5 = BIT4,
+ FivrRailInS0ix = FivrRailInS0i1S0i2 | FivrRailInS0i3,
+ FivrRailInSx = FivrRailInS3 | FivrRailInS4 | FivrRailInS5,
+ FivrRailAlwaysOn = FivrRailInS0ix | FivrRailInSx
+} FIVR_RAIL_SX_STATE;
+
+typedef enum {
+ FivrRetentionActive = BIT0,
+ FivrNormActive = BIT1,
+ FivrMinActive = BIT2,
+ FivrMinRetention = BIT3
+} FIVR_RAIL_SUPPORTED_VOLTAGE;
+
+/**
+ Structure for V1p05/Vnn VR rail configuration
+**/
+typedef struct {
+ /**
+ Mask to enable the usage of external VR rail in specific S0ix or Sx states
+ Use values from FIVR_RAIL_SX_STATE
+ The default is <b>FivrRailDisabled</b>.
+ **/
+ UINT32 EnabledStates : 6;
+
+ /**
+ VR rail voltage value that will be used in S0i2/S0i3 states.
+ This value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...)
+ The default for Vnn is set to <b>420 - 1050 mV</b>.
+ **/
+ UINT32 Voltage : 11;
+ /**
+ @deprecated
+ THIS POLICY IS DEPRECATED, PLEASE USE IccMaximum INSTEAD
+ VR rail Icc Max Value
+ Granularity of this setting is 1mA and maximal possible value is 500mA
+ The default is <b> 0mA </b>.
+ **/
+ UINT32 IccMax : 8;
+ /**
+ UINT32 Alignement
+ **/
+ UINT32 RsvdBits1 : 7;
+ /**
+ This register holds the control hold off values to be used when
+ changing the rail control for external bypass value in us
+ **/
+ UINT32 CtrlRampTmr : 8;
+
+ /**
+ Mask to set the supported configuration in VR rail.
+ Use values from FIVR_RAIL_SUPPORTED_VOLTAGE
+ **/
+ UINT32 SupportedVoltageStates : 4;
+
+ /**
+ VR rail Icc Maximum Value
+ Granularity of this setting is 1mA and maximal possible value is 500mA
+ The default is <b> 0mA </b>.
+ **/
+ UINT32 IccMaximum : 16;
+ /**
+ UINT32 Alignment
+ **/
+ UINT32 RsvdBits2 : 4;
+
+} FIVR_EXT_RAIL_CONFIG;
+
+
+/**
+ Structure for VCCIN_AUX voltage rail configuration
+**/
+typedef struct {
+ /**
+ Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage.
+ Voltage transition time required by motherboard voltage regulator when PCH changes
+ the VCCIN_AUX regulator set point from the low current mode voltage and high current mode voltage.
+ This field has 1us resolution.
+ When value is 0 PCH will not transition VCCIN_AUX to low current mode voltage.
+ The default is <b> 0xC </b>.
+ **/
+ UINT8 LowToHighCurModeVolTranTime;
+
+ /**
+ Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage.
+ Voltage transition time required by motherboard voltage regulator when PCH changes
+ the VCCIN_AUX regulator set point from the retention mode voltage to high current mode voltage.
+ This field has 1us resolution.
+ When value is 0 PCH will not transition VCCIN_AUX to retention voltage.
+ The default is <b> 0x36 </b>.
+ **/
+ UINT8 RetToHighCurModeVolTranTime;
+
+ /**
+ Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage.
+ Voltage transition time required by motherboard voltage regulator when PCH changes
+ the VCCIN_AUX regulator set point from the retention mode voltage to low current mode voltage.
+ This field has 1us resolution.
+ When value is 0 PCH will not transition VCCIN_AUX to retention voltage.
+ The default is <b> 0x2B </b>.
+ **/
+ UINT8 RetToLowCurModeVolTranTime;
+ UINT8 RsvdByte1;
+ /**
+ Transition time in microseconds from Off (0V) to High Current Mode Voltage.
+ Voltage transition time required by motherboard voltage regulator when PCH changes
+ the VCCIN_AUX regulator set point from 0V to the high current mode voltage.
+ This field has 1us resolution.
+ 0 = Transition to 0V is disabled
+ Setting this field to 0 sets VCCIN_AUX as a fixed rail that stays on
+ in all S0 & Sx power states after initial start up on G3 exit
+ The default is <b> 0x96 </b>.
+ **/
+ UINT32 OffToHighCurModeVolTranTime : 11;
+ UINT32 RsvdBits1 : 21;
+} FIVR_VCCIN_AUX_CONFIG;
+
+/**
+ The PCH_FIVR_CONFIG block describes FIVR settings.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ External V1P05 VR rail configuration.
+ **/
+ FIVR_EXT_RAIL_CONFIG ExtV1p05Rail;
+ /**
+ External Vnn VR rail configuration.
+ **/
+ FIVR_EXT_RAIL_CONFIG ExtVnnRail;
+ /**
+ Additional External Vnn VR rail configuration that will get applied
+ in Sx entry SMI callback. Required only if External Vnn VR
+ needs different settings for Sx than those specified in ExtVnnRail.
+ **/
+ FIVR_EXT_RAIL_CONFIG ExtVnnRailSx;
+ /**
+ VCCIN_AUX voltage rail configuration.
+ **/
+ FIVR_VCCIN_AUX_CONFIG VccinAux;
+
+ /**
+ Enable/Disable FIVR Dynamic Power Management
+ Default is <b> 1 </b>.
+ **/
+ UINT32 FivrDynPm : 1;
+ /**
+ Enable/Disable Bypass of FIVR configuration
+ Default is <b> 0 </b>.
+ **/
+ UINT32 BypassFivrConfig : 1;
+ UINT32 RsvdBits2 : 30;
+} PCH_FIVR_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _FIVR_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Gpio/GpioDevConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Gpio/GpioDevConfig.h
new file mode 100644
index 0000000000..5652df0259
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Gpio/GpioDevConfig.h
@@ -0,0 +1,37 @@
+/** @file
+ GPIO device policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _GPIO_DEV_CONFIG_H_
+#define _GPIO_DEV_CONFIG_H_
+
+extern EFI_GUID gGpioDxeConfigGuid;
+
+#define GPIO_DXE_CONFIG_REVISION 1
+
+#pragma pack (push,1)
+
+/**
+ This structure contains the DXE policies which are related to GPIO device.
+
+ <b>Revision 1:</b>
+ - Inital version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ If GPIO ACPI device is not used by OS it can be hidden. In such case
+ no other device exposed to the system can reference GPIO device in one
+ of its resources through GpioIo(..) or GpioInt(..) ACPI descriptors.
+ <b>0: Disable</b>; 1: Enable
+ **/
+ UINT32 HideGpioAcpiDevice : 1;
+ UINT32 RsvdBits : 31; ///< Reserved bits
+
+} GPIO_DXE_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _GPIO_DEV_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Graphics/Gen12/GraphicsConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Graphics/Gen12/GraphicsConfig.h
new file mode 100644
index 0000000000..c6a2f36612
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Graphics/Gen12/GraphicsConfig.h
@@ -0,0 +1,212 @@
+/** @file
+ Policy definition for Internal Graphics Config Block.
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _GRAPHICS_CONFIG_H_
+#define _GRAPHICS_CONFIG_H_
+#pragma pack(push, 1)
+
+#define GRAPHICS_DXE_CONFIG_REVISION 2
+
+#define MAX_BCLM_ENTRIES 20
+
+
+//
+// DDI defines
+//
+typedef enum {
+ DdiDisable = 0x00,
+ DdiDdcEnable = 0x01,
+} DDI_DDC_TBT_VAL;
+
+typedef enum {
+ DdiHpdDisable = 0x00,
+ DdiHpdEnable = 0x01,
+} DDI_HPD_VAL;
+
+typedef enum {
+ DdiPortDisabled = 0x00,
+ DdiPortEdp = 0x01,
+ DdiPortMipiDsi = 0x02,
+} DDI_PORT_SETTINGS;
+
+/**
+ This structure configures the Native GPIOs for DDI port per VBT settings.
+**/
+typedef struct {
+ UINT8 DdiPortAConfig; /// The Configuration of DDI port A, this settings must match VBT's settings. DdiPortDisabled - No LFP is connected on DdiPortA, <b>DdiPortEdp - Set DdiPortA to eDP</b>, DdiPortMipiDsi - Set DdiPortA to MIPI DSI
+ UINT8 DdiPortBConfig; /// The Configuration of DDI port B, this settings must match VBT's settings. DdiPortDisabled - No LFP is connected on DdiPortB, <b>DdiPortEdp - Set DdiPortB to eDP</b>, DdiPortMipiDsi - Set DdiPortB to MIPI DSI
+ UINT8 DdiPortAHpd; /// The HPD setting of DDI Port A, this settings must match VBT's settings. <b>DdiHpdDisable - Disable HPD</b>, DdiHpdEnable - Enable HPD
+ UINT8 DdiPortBHpd; /// The HPD setting of DDI Port B, this settings must match VBT's settings. DdiHpdDisable - Disable HPD, <b>DdiHpdEnable - Enable HPD</b>
+ UINT8 DdiPortCHpd; /// The HPD setting of DDI Port C, this settings must match VBT's settings. <b>DdiHpdDisable - Disable HPD</b>, DdiHpdEnable - Enable HPD
+ UINT8 DdiPort1Hpd; /// The HPD setting of DDI Port 1, this settings must match VBT's settings. <b>DdiHpdDisable - Disable HPD</b>, DdiHpdEnable - Enable HPD
+ UINT8 DdiPort2Hpd; /// The HPD setting of DDI Port 2, this settings must match VBT's settings. <b>DdiHpdDisable - Disable HPD</b>, DdiHpdEnable - Enable HPD
+ UINT8 DdiPort3Hpd; /// The HPD setting of DDI Port 3, this settings must match VBT's settings. <b>DdiHpdDisable - Disable HPD</b>, DdiHpdEnable - Enable HPD
+ UINT8 DdiPort4Hpd; /// The HPD setting of DDI Port 4, this settings must match VBT's settings. <b>DdiHpdDisable - Disable HPD</b>, DdiHpdEnable - Enable HPD
+ UINT8 DdiPortADdc; /// The DDC setting of DDI Port A, this settings must match VBT's settings. <b>DdiDisable - Disable DDC</b>, DdiDdcEnable - Enable DDC
+ UINT8 DdiPortBDdc; /// The DDC setting of DDI Port B, this settings must match VBT's settings. DdiDisable - Disable DDC, <b>DdiDdcEnable - Enable DDC </b>
+ UINT8 DdiPortCDdc; /// The DDC setting of DDI Port C, this settings must match VBT's settings. <b>DdiDisable - Disable DDC</b>, DdiDdcEnable - Enable DDC
+ UINT8 DdiPort1Ddc; /// The DDC setting of DDI Port 1, this settings must match VBT's settings. <b>DdiDisable - Disable DDC</b>, DdiDdcEnable - Enable DDC
+ UINT8 DdiPort2Ddc; /// The DDC setting of DDI Port 2, this settings must match VBT's settings. <b>DdiDisable - Disable DDC</b>, DdiDdcEnable - Enable DDC
+ UINT8 DdiPort3Ddc; /// The DDC setting of DDI Port 3, this settings must match VBT's settings. <b>DdiDisable - Disable DDC</b>, DdiDdcEnable - Enable DDC
+ UINT8 DdiPort4Ddc; /// The DDC setting of DDI Port 4, this settings must match VBT's settings. <b>DdiDisable - Disable DDC</b>, DdiDdcEnable - Enable DDC
+} DDI_CONFIGURATION;
+
+/**
+ This Configuration block is to configure GT related PreMem data/variables.\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ /**
+ Offset 28
+ Selection of the primary display device: 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, <b>3=AUTO</b>, 4=Switchable Graphics\n
+ When AUTO mode selected, the priority of display devices is: PCIe Graphics on PCH > PEG > iGFX
+ **/
+ UINT8 PrimaryDisplay;
+ /**
+ Offset 29
+ Intel Gfx Support. It controls enabling/disabling iGfx device.
+ When AUTO mode selected, iGFX will be turned off when external graphics detected.
+ If FALSE, all other polices can be ignored.
+ <b>2 = AUTO</b>;
+ 0 = FALSE;
+ 1 = TRUE.
+ **/
+ UINT8 InternalGraphics;
+ /**
+ Offset 30
+ Pre-allocated memory for iGFX\n
+ 0 = 0MB,1 or 247 = 32MB,\n
+ 2 = 64MB,\n
+ 240 = 4MB, 241 = 8MB,\n
+ 242 = 12MB, 243 = 16MB,\n
+ 244 = 20MB, 245 = 24MB,\n
+ 246 = 28MB, 248 = 36MB,\n
+ 249 = 40MB, 250 = 44MB,\n
+ 251 = 48MB, 252 = 52MB,\n
+ 253 = 56MB,<b> 254 = 60MB</b>,\n
+ <b>Note: enlarging pre-allocated memory for iGFX may need to reduce MmioSize because of 4GB boundary limitation</b>
+ **/
+ UINT16 IgdDvmt50PreAlloc;
+ UINT8 PanelPowerEnable; ///< Offset 32 :<b>(Test)</b> Control for enabling/disabling VDD force bit (Required only for early enabling of eDP panel): 0=FALSE, <b>1=TRUE</b>
+ UINT8 ApertureSize; ///< Offset 33 :Graphics aperture size (256MB is the recommended size as per BWG) : 0=128MB, <b>1=256MB</b>, 3=512MB, 7=1024MB, 15=2048MB.
+ UINT8 GtPsmiSupport; ///< Offset 34 :PSMI support On/Off: <b>0=FALSE</b>, 1=TRUE
+ UINT8 PsmiRegionSize; ///< Offset 35 :Psmi region size: <b>0=32MB</b>, 1=288MB, 2=544MB, 3=800MB, 4=1056MB
+ UINT8 DismSize; ///< Offset 36 :DiSM Size for 2LM Sku: <b>0=0GB</b>, 1=1GB, 2=2GB, 3=3GB, 4=4GB, 5=5GB, 6=6GB, 7=7GB
+ UINT8 DfdRestoreEnable; ///< Offset 37 :(Deprecated) Display memory map programming for DFD Restore <b>0- Disable</b>, 1- Enable
+ UINT16 GttSize; ///< Offset 38 :Selection of iGFX GTT Memory size: 1=2MB, 2=4MB, <b>3=8MB</b>
+ /**
+ Offset 40
+ Temp Address of System Agent GTTMMADR: Default is <b>0xAF000000</b>
+ **/
+ UINT32 GttMmAdr;
+ UINT32 GmAdr; ///< Offset 44 Obsolete not to be used, use GmAdr64
+ DDI_CONFIGURATION DdiConfiguration; ///< Offset 48 DDI configuration, need to match with VBT settings.
+
+ UINT8 GtClosEnable; ///< Offset 50 Gt ClOS
+ UINT8 Rsvd0[7]; ///< Offset 51 Reserved for 4 bytes of alignment
+ /**
+ Offset 58
+ Temp Address of System Agent GMADR: Default is <b>0xB0000000</b>
+ **/
+ UINT64 GmAdr64;
+ UINT16 DeltaT12PowerCycleDelay; ///< Offset 66 Power Cycle Delay required for eDP as per VESA standard.0 - 0 ms, <b>0xFFFF - Auto calculate to max 500 ms<\b>
+ UINT8 DisplayAudioLink; ///< Offset 68 Enable/Disable Display Audio Links in Pre-OS.<b>0- Disable</b>, 1- Enable
+ UINT8 OemT12DelayOverride; ///< Offset 69 :Oem T12 Delay Override <b> Disable<\b>,Enable-Enable T12 Time.
+ UINT8 Rsvd2[4]; ///< Offset 70 Reserved for 4 bytes of alignment
+} GRAPHICS_PEI_PREMEM_CONFIG;
+
+/**
+ This configuration block is to configure IGD related variables used in PostMem PEI.
+ If Intel Gfx Device is not supported, all policies can be ignored.
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Removed DfdRestoreEnable.
+ <b>Revision 3</b>:
+ - Removed DdiConfiguration.
+ <b>Revision 4</b>:
+ - Added new CdClock frequency
+ <b>Revision 5</b>:
+ - Added GT Chicket bits
+ <b>Revision 6</b>:
+ - Added LogoPixelHeight and LogoPixelWidth
+ <b>Revision 7</b>:
+ - Added SkipFspGop
+ <b>Revision 8</b>:
+ - Added VerticalResolution and HorizontalResolution
+
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ UINT8 RenderStandby; ///< Offset 28 :<b>(Test)</b> This field is used to enable or disable RC6 (Render Standby): 0=FALSE, <b>1=TRUE</b>
+ UINT8 PmSupport; ///< Offset 29 :<b>(Test)</b> Configure GT to use along with PM Support TRUE/FALSE: 0=FALSE, <b>1=TRUE</b>
+ /**
+ Offset 30
+ CdClock Frequency select\n
+ <b>0xFF = Auto. Max CdClock freq based on Reference Clk</b> \n
+ 0: 192 Mhz, 1: 307.2 Mhz, 2: 312 Mhz, 3: 324 Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz
+
+ **/
+ UINT16 CdClock;
+ UINT8 PeiGraphicsPeimInit; ///< Offset 32 : This policy is used to enable/disable Intel Gfx PEIM.<b>0- Disable</b>, 1- Enable
+ UINT8 CdynmaxClampEnable; ///< Offset 33 : This policy is used to enable/disable CDynmax Clamping Feature (CCF) <b>1- Enable</b>, 0- Disable
+ UINT16 GtFreqMax; ///< Offset 34 : <b>(Test)</b> Max GT frequency limited by user in multiples of 50MHz: Default value which indicates normal frequency is <b>0xFF</b>
+ UINT8 DisableTurboGt; ///< Offset 36 : This policy is used to enable/disable DisableTurboGt <b>0- Disable</b>, 1- Enable
+ UINT8 SkipCdClockInit; ///< Offset 37 : SKip full CD clock initialization. <b>0- Disable</b>, 1- Enable
+ UINT8 RC1pFreqEnable; ///< Offset 38 : This policy is used to enable/disable RC1p Frequency. <b>0- Disable</b>, 1- Enable
+ UINT8 PavpEnable; ///< Offset 39 :IGD PAVP TRUE/FALSE: 0=FALSE, <b>1=TRUE</b>
+ VOID* LogoPtr; ///< Offset 40 Address of Intel Gfx PEIM Logo to be displayed
+ UINT32 LogoSize; ///< Offset 44 Intel Gfx PEIM Logo Size
+ VOID* GraphicsConfigPtr; ///< Offset 48 Address of the Graphics Configuration Table
+ VOID* BltBufferAddress; ///< Offset 52 Address of Blt buffer for PEIM Logo use
+ UINT32 BltBufferSize; ///< Offset 56 The size for Blt Buffer, calculating by PixelWidth * PixelHeight * 4 bytes (the size of EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
+ UINT8 ProgramGtChickenBits; ///< Offset 60 Program GT Chicket bits in GTTMMADR + 0xD00 BITS [3:1].
+ UINT8 SkipFspGop; ///< Offset 61 This policy is used to skip PEIM GOP in FSP.<b>0- Use FSP provided GOP driver</b>, 1- Skip FSP provided GOP driver
+ UINT8 Rsvd1[2]; ///< Offset 62 Reserved for 4 bytes alignment
+ UINT32 LogoPixelHeight; ///< Offset 64 Address of LogoPixelHeight for PEIM Logo use
+ UINT32 LogoPixelWidth; ///< Offset 68 Address of LogoPixelWidth for PEIM Logo use
+ UINT32 VerticalResolution; ///< Offset 72 Address of VerticalResolution for PEIM Logo use
+ UINT32 HorizontalResolution; ///< Offset 76 Address of HorizontalResolution for PEIM Logo use
+} GRAPHICS_PEI_CONFIG;
+
+/**
+ This configuration block is to configure IGD related variables used in DXE.
+ If Intel Gfx Device is not supported or disabled, all policies will be ignored.
+ The data elements should be initialized by a Platform Module.\n
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Removed IgdDvmtMemSize.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27: Config Block Header
+ UINT32 Size; ///< Offset 28 - 31: This field gives the size of the GOP VBT Data buffer
+ EFI_PHYSICAL_ADDRESS VbtAddress; ///< Offset 32 - 39: This field points to the GOP VBT data buffer
+ UINT8 PlatformConfig; ///< Offset 40: This field gives the Platform Configuration Information (0=Platform is S0ix Capable for ULT SKUs only, <b>1=Platform is not S0ix Capable</b>, 2=Force Platform is S0ix Capable for All SKUs)
+ UINT8 AlsEnable; ///< Offset 41: Ambient Light Sensor Enable: <b>0=Disable</b>, 2=Enable
+ UINT8 BacklightControlSupport; ///< Offset 42: Backlight Control Support: 0=PWM Inverted, <b>2=PWM Normal</b>
+ UINT8 IgdBootType; ///< Offset 43: IGD Boot Type CMOS option: <b>0=Default</b>, 0x01=CRT, 0x04=EFP, 0x08=LFP, 0x20=EFP3, 0x40=EFP2, 0x80=LFP2
+ UINT32 IuerStatusVal; ///< Offset 44 - 47: Offset 16 This field holds the current status of all the supported Ultrabook events (Intel(R) Ultrabook Event Status bits)
+ CHAR16 GopVersion[0x10]; ///< Offset 48 - 79:This field holds the GOP Driver Version. It is an Output Protocol and updated by the Silicon code
+ /**
+ Offset 80: IGD Panel Type CMOS option\n
+ <b>0=Default</b>, 1=640X480LVDS, 2=800X600LVDS, 3=1024X768LVDS, 4=1280X1024LVDS, 5=1400X1050LVDS1\n
+ 6=1400X1050LVDS2, 7=1600X1200LVDS, 8=1280X768LVDS, 9=1680X1050LVDS, 10=1920X1200LVDS, 13=1600X900LVDS\n
+ 14=1280X800LVDS, 15=1280X600LVDS, 16=2048X1536LVDS, 17=1366X768LVDS
+ **/
+ UINT8 IgdPanelType;
+ UINT8 IgdPanelScaling; ///< Offset 81: IGD Panel Scaling: <b>0=AUTO</b>, 1=OFF, 6=Force scaling
+ UINT8 IgdBlcConfig; ///< Offset 82: Backlight Control Support: 0=PWM Inverted, <b>2=PWM Normal</b>
+ UINT8 IgdDvmtMemSize; ///< Offset 83: @deprecated IGD DVMT Memory Size: 1=128MB, <b>2=256MB</b>, 3=MAX
+ UINT8 GfxTurboIMON; ///< Offset 84: IMON Current Value: 14=Minimal, <b>31=Maximum</b>
+ UINT8 Reserved[3]; ///< Offset 85: Reserved for DWORD alignment.
+ UINT16 BCLM[MAX_BCLM_ENTRIES]; ///< Offset 88: IGD Backlight Brightness Level Duty cycle Mapping Table.
+} GRAPHICS_DXE_CONFIG;
+#pragma pack(pop)
+
+#endif // _GRAPHICS_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/HostBridge/Ver1/HostBridgeConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/HostBridge/Ver1/HostBridgeConfig.h
new file mode 100644
index 0000000000..11ef7b119c
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/HostBridge/Ver1/HostBridgeConfig.h
@@ -0,0 +1,58 @@
+/** @file
+ Configurations for HostBridge
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _HOST_BRIDGE_CONFIG_H_
+#define _HOST_BRIDGE_CONFIG_H_
+
+#include <ConfigBlock.h>
+
+
+extern EFI_GUID gHostBridgePeiPreMemConfigGuid;
+extern EFI_GUID gHostBridgePeiConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ This configuration block describes HostBridge settings in PreMem.\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ UINT32 MchBar; ///< Offset 28 Address of System Agent MCHBAR: <b>0xFEDC0000(TGL)/0xFEA80000(JSL)<b>
+ UINT32 DmiBar; ///< Offset 32 Address of System Agent DMIBAR: <b>0xFEDA0000</b>
+ UINT32 EpBar; ///< Offset 36 Address of System Agent EPBAR: <b>0xFEDA1000</b>
+ UINT32 GdxcBar; ///< Offset 40 Address of System Agent GDXCBAR: <b>0xFED84000</b>
+ UINT32 RegBar; ///< Offset 44 Address of System Agent REGBAR: <b>0xFB000000</b>
+ UINT32 EdramBar; ///< Offset 48 Address of System Agent EDRAMBAR: <b>0xFED80000</b>
+ /**
+ Offset 52 :
+ Size of reserved MMIO space for PCI devices\n
+ <b>0=AUTO</b>, 512=512MB, 768=768MB, 1024=1024MB, 1280=1280MB, 1536=1536MB, 1792=1792MB,
+ 2048=2048MB, 2304=2304MB, 2560=2560MB, 2816=2816MB, 3072=3072MB\n
+ When AUTO mode selected, the MMIO size will be calculated by required MMIO size from PCIe devices detected.
+ **/
+ UINT32 MmioSize;
+ UINT32 MmioSizeAdjustment; ///< Offset 56 Increase (given positive value) or Decrease (given negative value) the Reserved MMIO size when Dynamic Tolud/AUTO mode enabled (in MBs): <b>0=no adjustment</b>
+ UINT8 EnableAbove4GBMmio; ///< Offset 60 Enable/disable above 4GB MMIO resource support: 0=Disable, <b>1=Enable</b>
+ UINT8 Reserved[3]; ///< Offset 61 Reserved for future use.
+} HOST_BRIDGE_PREMEM_CONFIG;
+
+
+/**
+ This configuration block describes HostBridge settings in Post-Mem.\n
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ UINT8 SkipPamLock; ///< Offset 28 :To skip PAM register locking. @note It is still recommended to set PCI Config space B0: D0: F0: Offset 80h[0]=1 in platform code even Silicon code skipped this.\n <b>0=All PAM registers will be locked in Silicon code</b>, 1=Skip lock PAM registers in Silicon code.
+ UINT8 Reserved[3]; ///< Offset 29 Reserved for future use.
+} HOST_BRIDGE_PEI_CONFIG;
+
+#pragma pack (pop)
+
+#endif
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Itss/InterruptConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Itss/InterruptConfig.h
new file mode 100644
index 0000000000..926c7ab6ab
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Itss/InterruptConfig.h
@@ -0,0 +1,38 @@
+/** @file
+ Interrupt policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _INTERRUPT_CONFIG_H_
+#define _INTERRUPT_CONFIG_H_
+
+extern EFI_GUID gInterruptConfigGuid;
+
+#pragma pack (push,1)
+
+//
+// --------------------- Interrupts Config ------------------------------
+//
+typedef enum {
+ PchNoInt, ///< No Interrupt Pin
+ PchIntA,
+ PchIntB,
+ PchIntC,
+ PchIntD
+} PCH_INT_PIN;
+
+///
+/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device.
+///
+typedef struct {
+ UINT8 Device; ///< Device number
+ UINT8 Function; ///< Device function
+ UINT8 IntX; ///< Interrupt pin: INTA-INTD (see PCH_INT_PIN)
+ UINT8 Irq; ///< IRQ to be set for device.
+} PCH_DEVICE_INTERRUPT_CONFIG;
+
+
+#pragma pack (pop)
+
+#endif // _INTERRUPT_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Memory/Ver2/MemoryConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Memory/Ver2/MemoryConfig.h
new file mode 100644
index 0000000000..2be85da5a8
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Memory/Ver2/MemoryConfig.h
@@ -0,0 +1,551 @@
+/** @file
+ Policy definition of Memory Config Block
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _MEMORY_CONFIG_H_
+#define _MEMORY_CONFIG_H_
+
+
+#pragma pack(push, 1)
+
+// MEMORY_CONFIGURATION_REVISION:
+// 3 - Adds DDR5 PDA Enumeration training
+// 4 - Adds LPDDR4 Command Mirroring
+// 5 - Adds PprEnableType
+// 6 - Removed IbeccParity
+// 7 - Adds MarginLimitCheck training within MEMORY_CONFIGURATION
+// 8 - Adds LpddrRttCa, LpddrRttWr
+// 9 - Adds VddqVoltage, VppVoltage
+// 10 - Changes PprEnableType to PprEnable
+// 11 - Changes DisableDimmChannel to DisableChannel
+// 12 - Added DIMMDFE
+// 13 - Added ExtendedBankHashing
+// 14 - Added IBECC Error Injection knobs: IbeccErrInjControl, IbeccErrInjAddress, IbeccErrInjMask, IbeccErrInjCount
+// 15 - Added DynamicMemoryBoost
+// 16 - Added ReuseAdlDdr5Board
+// 17 - Added RefreshWm; Deprecated RefreshPanicWm and RefreshHpWm
+// 18 - Added DebugValue
+// 19 - Added McRefreshRate; Deprecated McRefresh2X
+// 20 - Added RealtimeMemoryFrequency
+// 21 - Added PeriodicDcc and LpMode
+// 22 - Added Tx Dqs Dcc Training
+// 23 - Added tRFCpb, tRFC2, tRFC4, tRRD_L, tRRD_S, tWTR_L, tCCD_L, tWTR_S
+// 24 - Added EccErrInjAddress, EccErrInjMask, EccErrInjCount
+// 25 - Added FreqLimitMixedConfig, FirstDimmBitMask, UserBd
+// 26 - Added SagvSwitchFactorIA/GT/IO/Stall, SagvHeuristicsDownControl, SagvHeuristicsUpControl
+// 27 - Added DRAMDCA
+// 28 - Added FreqLimitMixedConfig_1R1R_8GB, FreqLimitMixedConfig_1R1R_16GB, FreqLimitMixedConfig_1R1R_8GB_16GB, FreqLimitMixedConfig_2R2R
+// 29 - Added LctCmdEyeWidth
+// 30 - Added FirstDimmBitMaskEcc
+// 31 - Added Lp5BankMode
+// 32 - Added WRDS
+// 33 - Added EARLYDIMMDFE for Early DIMM DFE Training
+// 34 - Added OverloadSAM
+#define MEMORY_CONFIGURATION_REVISION 34
+
+// MEMORY_CONFIG_NO_CRC_REVISION:
+// 3 - adds DDR5 SetMemoryPmicVoltage in SA_FUNCTION_CALLS
+#define MEMORY_CONFIG_NO_CRC_REVISION 3
+
+///
+/// MEMORY_CONFIGURATION interface definitions
+///
+#define MRC_MAX_RCOMP_TARGETS 5
+///
+/// Memory SubSystem Definitions
+///
+#define MEM_CFG_MAX_CONTROLLERS 2
+#define MEM_CFG_MAX_CHANNELS 4
+#define MEM_CFG_MAX_DIMMS 2
+#define MEM_CFG_NUM_BYTES_MAPPED 2
+#define MEM_CFG_MAX_SPD_SIZE 1024
+#define MEM_CFG_MAX_SOCKETS (MEM_CFG_MAX_CONTROLLERS * MEM_CFG_MAX_CHANNELS * MEM_CFG_MAX_DIMMS)
+#ifndef MEM_MAX_SAGV_POINTS
+#define MEM_MAX_SAGV_POINTS 4
+#endif
+#define MEM_MAX_IBECC_REGIONS 8
+
+///
+/// SA SPD profile selections.
+///
+typedef enum {
+ DEFAULT_SPD, ///< Standard DIMM profile select.
+ CUSTOM_PROFILE, ///< XMP enthusiast settings: User specifies various override values
+ XMP_PROFILE_1, ///< XMP enthusiast settings: XMP profile #1
+ XMP_PROFILE_2, ///< XMP enthusiast settings: XMP profile #2
+ XMP_PROFILE_3, ///< XMP enthusiast settings: XMP profile #3
+ XMP_USER_PROFILE_4, ///< XMP enthusiast settings: XMP user profile #4
+ XMP_USER_PROFILE_5, ///< XMP enthusiast settings: XMP user profile #5
+ SPDProfileMax = 0xFF ///< Ensures SA_SPD is UINT8
+} SA_SPD;
+
+///
+/// Define the boot modes used by the SPD read function.
+///
+typedef enum {
+ SpdCold, ///< Cold boot
+ SpdWarm, ///< Warm boot
+ SpdS3, ///< S3 resume
+ SpdFast, ///< Fast boot
+ SpdBootModeMax ///< Delimiter
+} SPD_BOOT_MODE;
+
+/**
+ SPD Data Buffer
+**/
+typedef struct {
+ UINT8 SpdData[MEM_CFG_MAX_CONTROLLERS][MEM_CFG_MAX_CHANNELS][MEM_CFG_MAX_DIMMS][MEM_CFG_MAX_SPD_SIZE]; ///< SpdData
+//Next Field Offset 2048
+} SPD_DATA_BUFFER;
+
+/**
+ DqDqs Mapping
+**/
+typedef struct {
+ UINT8 DqsMapCpu2Dram[MEM_CFG_MAX_CONTROLLERS][MEM_CFG_MAX_CHANNELS][MEM_CFG_NUM_BYTES_MAPPED]; ///< DqsMapCpu2Dram
+ UINT8 DqMapCpu2Dram[MEM_CFG_MAX_CONTROLLERS][MEM_CFG_MAX_CHANNELS][MEM_CFG_NUM_BYTES_MAPPED][8]; ///< DqMapCpu2Dram
+//Next Field Offset 16
+} SA_MEMORY_DQDQS_MAPPING;
+
+/**
+ Rcomp Policies
+**/
+typedef struct {
+ UINT16 RcompResistor; ///< Offset 0: Reference RCOMP resistors on motherboard ~ 100 ohms
+ UINT16 RcompTarget[MRC_MAX_RCOMP_TARGETS]; ///< Offset 1: RCOMP target values for DqOdt, DqDrv, CmdDrv, CtlDrv, ClkDrv
+//Next Field Offset 16
+} SA_MEMORY_RCOMP;
+
+/**
+ SPD Offset Table
+**/
+typedef struct {
+ UINT16 Start; ///< Offset 0
+ UINT16 End; ///< Offset 2
+ UINT8 BootMode; ///< Offset 4
+ UINT8 Reserved3[3]; ///< Offset 5 Reserved for future use
+} SPD_OFFSET_TABLE;
+
+///
+/// SA memory address decode.
+///
+typedef struct
+{
+ UINT8 Controller; ///< Offset 0 Zero based Controller number
+ UINT8 Channel; ///< Offset 1 Zero based Channel number
+ UINT8 Dimm; ///< Offset 2 Zero based DIMM number
+ UINT8 Rank; ///< Offset 3 Zero based Rank number
+ UINT8 BankGroup; ///< Offset 4 Zero based Bank Group number
+ UINT8 Bank; ///< Offset 5 Zero based Bank number
+ UINT16 Cas; ///< Offset 6 Zero based CAS number
+ UINT32 Ras; ///< Offset 8 Zero based RAS number
+} SA_ADDRESS_DECODE;
+
+typedef UINT8 (EFIAPI * SA_IO_READ_8) (UINTN IoAddress); ///< CPU I/O port 8-bit read.
+typedef UINT16 (EFIAPI * SA_IO_READ_16) (UINTN IoAddress); ///< CPU I/O port 16-bit read.
+typedef UINT32 (EFIAPI * SA_IO_READ_32) (UINTN IoAddress); ///< CPU I/O port 32-bit read.
+typedef UINT8 (EFIAPI * SA_IO_WRITE_8) (UINTN IoAddress, UINT8 Value); ///< CPU I/O port 8-bit write.
+typedef UINT16 (EFIAPI * SA_IO_WRITE_16) (UINTN IoAddress, UINT16 Value); ///< CPU I/O port 16-bit write.
+typedef UINT32 (EFIAPI * SA_IO_WRITE_32) (UINTN IoAddress, UINT32 Value); ///< CPU I/O port 32-bit write.
+typedef UINT8 (EFIAPI * SA_MMIO_READ_8) (UINTN Address); ///< Memory Mapped I/O port 8-bit read.
+typedef UINT16 (EFIAPI * SA_MMIO_READ_16) (UINTN Address); ///< Memory Mapped I/O port 16-bit read.
+typedef UINT32 (EFIAPI * SA_MMIO_READ_32) (UINTN Address); ///< Memory Mapped I/O port 32-bit read.
+typedef UINT64 (EFIAPI * SA_MMIO_READ_64) (UINTN Address); ///< Memory Mapped I/O port 64-bit read.
+typedef UINT8 (EFIAPI * SA_MMIO_WRITE_8) (UINTN Address, UINT8 Value); ///< Memory Mapped I/O port 8-bit write.
+typedef UINT16 (EFIAPI * SA_MMIO_WRITE_16) (UINTN Address, UINT16 Value); ///< Memory Mapped I/O port 16-bit write.
+typedef UINT32 (EFIAPI * SA_MMIO_WRITE_32) (UINTN Address, UINT32 Value); ///< Memory Mapped I/O port 32-bit write.
+typedef UINT64 (EFIAPI * SA_MMIO_WRITE_64) (UINTN Address, UINT64 Value); ///< Memory Mapped I/O port 64-bit write.
+typedef UINT8 (EFIAPI * SA_SMBUS_READ_8) (UINTN Address, RETURN_STATUS *Status); ///< Smbus 8-bit read.
+typedef UINT16 (EFIAPI * SA_SMBUS_READ_16) (UINTN Address, RETURN_STATUS *Status); ///< Smbus 16-bit read.
+typedef UINT8 (EFIAPI * SA_SMBUS_WRITE_8) (UINTN Address, UINT8 Value, RETURN_STATUS *Status); ///< Smbus 8-bit write.
+typedef UINT16 (EFIAPI * SA_SMBUS_WRITE_16) (UINTN Address, UINT16 Value, RETURN_STATUS *Status); ///< Smbus 16-bit write.
+typedef UINT32 (EFIAPI * SA_GET_PCI_DEVICE_ADDRESS) (UINT8 Bus, UINT8 Device, UINT8 Function, UINT8 Offset); ///< Get PCI device address.
+typedef UINT32 (EFIAPI * SA_GET_PCIE_DEVICE_ADDRESS) (UINT8 Bus, UINT8 Device, UINT8 Function, UINT8 Offset); ///< Get PCI express device address.
+typedef VOID (EFIAPI * SA_GET_RTC_TIME) (UINT8 *Second, UINT8 *Minute, UINT8 *Hour, UINT8 *Day, UINT8 *Month, UINT16 *Year); ///< Get the current time value.
+typedef UINT64 (EFIAPI * SA_GET_CPU_TIME) (VOID); ///< The current CPU time in milliseconds.
+typedef VOID * (EFIAPI * SA_MEMORY_COPY) (VOID *Destination, CONST VOID *Source, UINTN NumBytes); ///< Perform byte copy operation.
+typedef VOID * (EFIAPI * SA_MEMORY_SET_BYTE) (VOID *Buffer, UINTN NumBytes, UINT8 Value); ///< Perform byte initialization operation.
+typedef VOID * (EFIAPI * SA_MEMORY_SET_WORD) (VOID *Buffer, UINTN NumWords, UINT16 Value); ///< Perform word initialization operation.
+typedef VOID * (EFIAPI * SA_MEMORY_SET_DWORD) (VOID *Buffer, UINTN NumDwords, UINT32 Value); ///< Perform dword initialization operation.
+typedef UINT64 (EFIAPI * SA_LEFT_SHIFT_64) (UINT64 Data, UINTN NumBits); ///< Left shift the 64-bit data value by specified number of bits.
+typedef UINT64 (EFIAPI * SA_RIGHT_SHIFT_64) (UINT64 Data, UINTN NumBits); ///< Right shift the 64-bit data value by specified number of bits.
+typedef UINT64 (EFIAPI * SA_MULT_U64_U32) (UINT64 Multiplicand, UINT32 Multiplier); ///< Multiply a 64-bit data value by a 32-bit data value.
+typedef UINT64 (EFIAPI * SA_DIV_U64_U64) (UINT64 Dividend, UINT64 Divisor, UINT64 *Remainder); ///< Divide a 64-bit data value by a 64-bit data value.
+typedef BOOLEAN (EFIAPI * SA_GET_SPD_DATA) (SPD_BOOT_MODE BootMode, UINT8 SpdAddress, UINT8 *Buffer, UINT8 *Ddr3Table, UINT32 Ddr3TableSize, UINT8 *Ddr4Table, UINT32 Ddr4TableSize, UINT8 *LpddrTable, UINT32 LpddrTableSize); ///< Read the SPD data over the SMBus, at the given SmBus SPD address and copy the data to the data structure.
+typedef UINT8 (EFIAPI * SA_GET_MC_ADDRESS_DECODE) (UINT64 Address, SA_ADDRESS_DECODE *DramAddress);
+typedef UINT8 (EFIAPI * SA_GET_MC_ADDRESS_ENCODE) (SA_ADDRESS_DECODE *DramAddress, UINT64 Address);
+typedef BOOLEAN (EFIAPI * SA_GET_RANDOM_NUMBER) (UINT32 *Rand); ///< Get the next random 32-bit number.
+typedef EFI_STATUS (EFIAPI * SA_CPU_MAILBOX_READ) (UINT32 Type, UINT32 Command, UINT32 *Value, UINT32 *Status); ///< Perform a CPU mailbox read.
+typedef EFI_STATUS (EFIAPI * SA_CPU_MAILBOX_WRITE) (UINT32 Type, UINT32 Command, UINT32 Value, UINT32 *Status); ///< Perform a CPU mailbox write.
+typedef UINT32 (EFIAPI * SA_GET_MEMORY_VDD) (VOID *GlobalData, UINT32 DefaultVdd); ///< Get the current memory voltage (VDD).
+typedef UINT32 (EFIAPI * SA_SET_MEMORY_VDD) (VOID *GlobalData, UINT32 DefaultVdd, UINT32 Value); ///< Set the memory voltage (VDD) to the given value.
+typedef UINT32 (EFIAPI * SA_SET_MEMORY_PMIC_VOLTAGE) (VOID *GlobalData, UINT8 SpdAddress, UINT32 Vdd, UINT32 Vddq, UINT32 Vpp); ///< Set DDR5 memory voltages (VDD, VDDQ, VPP) to the given values.
+typedef UINT32 (EFIAPI * SA_CHECKPOINT) (VOID *GlobalData, UINT32 CheckPoint, VOID *Scratch); ///< Check point that is called at various points in the MRC.
+typedef VOID (EFIAPI * SA_DEBUG_HOOK) (VOID *GlobalData, UINT16 DisplayDebugNumber); ///< Typically used to display to the I/O port 80h.
+typedef UINT8 (EFIAPI * SA_CHANNEL_EXIST) (VOID *Outputs, UINT8 Channel); ///< Returns whether Channel is or is not present.
+typedef INT32 (EFIAPI * SA_PRINTF) (VOID *Debug, UINT32 Level, char *Format, ...); ///< Print to output stream/device.
+typedef VOID (EFIAPI * SA_DEBUG_PRINT) (VOID *String); ///< Output a string to the debug stream/device.
+typedef UINT32 (EFIAPI * SA_CHANGE_MARGIN) (VOID *GlobalData, UINT8 Param, INT32 Value0, INT32 Value1, UINT8 EnMultiCast, UINT8 Channel, UINT8 RankIn, UINT8 Byte, UINT8 BitIn, UINT8 UpdateMrcData, UINT8 SkipWait, UINT32 RegFileParam); ///< Change the margin.
+typedef UINT8 (EFIAPI * SA_SIGN_EXTEND) (UINT8 Value, UINT8 OldMsb, UINT8 NewMsb); ///< Sign extends OldMSB to NewMSB Bits (Eg: Bit 6 to Bit 7).
+typedef VOID (EFIAPI * SA_SHIFT_PI_COMMAND_TRAIN) (VOID *GlobalData, UINT8 Channel, UINT8 Iteration, UINT8 RankMask, UINT8 GroupMask, INT32 NewValue, UINT8 UpdateHost); ///< Move CMD/CTL/CLK/CKE PIs during training.
+typedef VOID (EFIAPI * SA_UPDATE_VREF) (VOID *GlobalData, UINT8 Channel, UINT8 RankMask, UINT16 DeviceMask, UINT8 VrefType, INT32 Offset, BOOLEAN UpdateMrcData, BOOLEAN PDAmode, BOOLEAN SkipWait); ///< Update the Vref value and wait until it is stable.
+typedef UINT8 (EFIAPI * SA_GET_RTC_CMOS) (UINT8 Location); ///< Get the current value of the specified RTC CMOS location.
+typedef UINT64 (EFIAPI * SA_MSR_READ_64) (UINT32 Location); ///< Get the current value of the specified MSR location.
+typedef UINT64 (EFIAPI * SA_MSR_WRITE_64) (UINT32 Location, UINT64 Data); ///< Set the current value of the specified MSR location.
+typedef VOID (EFIAPI * SA_MRC_RETURN_FROM_SMC) (VOID *GlobalData, UINT32 MrcStatus); ///< Hook function after returning from MrcStartMemoryConfiguration()
+typedef VOID (EFIAPI * SA_MRC_DRAM_RESET) (UINT32 PciEBaseAddress, UINT32 ResetValue); ///< Assert or deassert DRAM_RESET# pin; this is used in JEDEC Reset.
+typedef VOID (EFIAPI * SA_DELAY_NS) (VOID *GlobalData, UINT32 DelayNs); ///< Delay (stall) for the given amount of nanoseconds.
+typedef VOID (EFIAPI * SA_SET_LOCK_PRMRR) (UINT64 PrmrrBaseAddress, UINT32 PrmrrSize);
+
+
+///
+/// Function calls into the SA.
+///
+typedef struct {
+ SA_IO_READ_8 IoRead8; ///< Offset 0: - CPU I/O port 8-bit read.
+ SA_IO_READ_16 IoRead16; ///< Offset 4: - CPU I/O port 16-bit read.
+ SA_IO_READ_32 IoRead32; ///< Offset 8: - CPU I/O port 32-bit read.
+ SA_IO_WRITE_8 IoWrite8; ///< Offset 12: - CPU I/O port 8-bit write.
+ SA_IO_WRITE_16 IoWrite16; ///< Offset 16: - CPU I/O port 16-bit write.
+ SA_IO_WRITE_32 IoWrite32; ///< Offset 20: - CPU I/O port 32-bit write.
+ SA_MMIO_READ_8 MmioRead8; ///< Offset 24: - Memory Mapped I/O port 8-bit read.
+ SA_MMIO_READ_16 MmioRead16; ///< Offset 28: - Memory Mapped I/O port 16-bit read.
+ SA_MMIO_READ_32 MmioRead32; ///< Offset 32: - Memory Mapped I/O port 32-bit read.
+ SA_MMIO_READ_64 MmioRead64; ///< Offset 36: - Memory Mapped I/O port 64-bit read.
+ SA_MMIO_WRITE_8 MmioWrite8; ///< Offset 40: - Memory Mapped I/O port 8-bit write.
+ SA_MMIO_WRITE_16 MmioWrite16; ///< Offset 44: - Memory Mapped I/O port 16-bit write.
+ SA_MMIO_WRITE_32 MmioWrite32; ///< Offset 48: - Memory Mapped I/O port 32-bit write.
+ SA_MMIO_WRITE_64 MmioWrite64; ///< Offset 52: - Memory Mapped I/O port 64-bit write.
+ SA_SMBUS_READ_8 SmbusRead8; ///< Offset 56: - Smbus 8-bit read.
+ SA_SMBUS_READ_16 SmbusRead16; ///< Offset 60: - Smbus 16-bit read.
+ SA_SMBUS_WRITE_8 SmbusWrite8; ///< Offset 64: - Smbus 8-bit write.
+ SA_SMBUS_WRITE_16 SmbusWrite16; ///< Offset 68: - Smbus 16-bit write.
+ SA_GET_PCI_DEVICE_ADDRESS GetPciDeviceAddress; ///< Offset 72: - Get PCI device address.
+ SA_GET_PCIE_DEVICE_ADDRESS GetPcieDeviceAddress; ///< Offset 76: - Get PCI express device address.
+ SA_GET_RTC_TIME GetRtcTime; ///< Offset 80: - Get the current time value.
+ SA_GET_CPU_TIME GetCpuTime; ///< Offset 84: - The current CPU time in milliseconds.
+ SA_MEMORY_COPY CopyMem; ///< Offset 88: - Perform byte copy operation.
+ SA_MEMORY_SET_BYTE SetMem; ///< Offset 92: - Perform byte initialization operation.
+ SA_MEMORY_SET_WORD SetMemWord; ///< Offset 96: - Perform word initialization operation.
+ SA_MEMORY_SET_DWORD SetMemDword; ///< Offset 100: - Perform dword initialization operation.
+ SA_LEFT_SHIFT_64 LeftShift64; ///< Offset 104: - Left shift the 64-bit data value by specified number of bits.
+ SA_RIGHT_SHIFT_64 RightShift64; ///< Offset 108: - Right shift the 64-bit data value by specified number of bits.
+ SA_MULT_U64_U32 MultU64x32; ///< Offset 112: - Multiply a 64-bit data value by a 32-bit data value.
+ SA_DIV_U64_U64 DivU64x64; ///< Offset 116: - Divide a 64-bit data value by a 64-bit data value.
+ SA_GET_SPD_DATA GetSpdData; ///< Offset 120: - Read the SPD data over the SMBus, at the given SmBus SPD address and copy the data to the data structure.
+ SA_GET_RANDOM_NUMBER GetRandomNumber; ///< Offset 124: - Get the next random 32-bit number.
+ SA_CPU_MAILBOX_READ CpuMailboxRead; ///< Offset 128: - Perform a CPU mailbox read.
+ SA_CPU_MAILBOX_WRITE CpuMailboxWrite; ///< Offset 132: - Perform a CPU mailbox write.
+ SA_GET_MEMORY_VDD GetMemoryVdd; ///< Offset 136: - Get the current memory voltage (VDD).
+ SA_SET_MEMORY_VDD SetMemoryVdd; ///< Offset 140: - Set the memory voltage (VDD) to the given value.
+ SA_CHECKPOINT CheckPoint; ///< Offset 144: - Check point that is called at various points in the MRC.
+ SA_DEBUG_HOOK DebugHook; ///< Offset 148: - Typically used to display to the I/O port 80h.
+ SA_DEBUG_PRINT DebugPrint; ///< Offset 152: - Output a string to the debug stream/device.
+ SA_GET_RTC_CMOS GetRtcCmos; ///< Offset 156: - Get the current value of the specified RTC CMOS location.
+ SA_MSR_READ_64 ReadMsr64; ///< Offset 160: - Get the current value of the specified MSR location.
+ SA_MSR_WRITE_64 WriteMsr64; ///< Offset 164 - Set the current value of the specified MSR location.
+ SA_MRC_RETURN_FROM_SMC MrcReturnFromSmc; ///< Offset 168 - Hook function after returning from MrcStartMemoryConfiguration()
+ SA_MRC_DRAM_RESET MrcDramReset; ///< Offset 172 - Assert or deassert DRAM_RESET# pin; this is used in JEDEC Reset.
+ SA_DELAY_NS MrcDelayNs; ///< Offset 176 - Delay (stall) for the given amount of nanoseconds.
+ SA_SET_MEMORY_PMIC_VOLTAGE SetMemoryPmicVoltage; ///< Offset 180: - Set the memory voltage (VDD/VDDQ/VPP) by PMIC for DDR5.
+} SA_FUNCTION_CALLS;
+
+///
+/// Function calls into the MRC.
+///
+typedef struct {
+ SA_CHANNEL_EXIST MrcChannelExist; ///< Offset 0: - Returns whether Channel is or is not present.
+ SA_PRINTF MrcPrintf; ///< Offset 4: - Print to output stream/device.
+ SA_CHANGE_MARGIN MrcChangeMargin; ///< Offset 8: - Change the margin.
+ SA_SIGN_EXTEND MrcSignExtend; ///< Offset 12: - Sign extends OldMSB to NewMSB Bits (Eg: Bit 6 to Bit 7).
+ SA_SHIFT_PI_COMMAND_TRAIN ShiftPiCommandTrain; ///< Offset 16: - Move CMD/CTL/CLK/CKE PIs during training.
+ SA_UPDATE_VREF MrcUpdateVref; ///< Offset 20: - Update the Vref value and wait until it is stable.
+} SA_MEMORY_FUNCTIONS;
+
+/**
+ Memory Configuration
+ The contents of this structure are CRC'd by the MRC for option change detection.
+ This structure is copied en mass to the MrcInput structure. If you add fields here, you must update the MrcInput structure.
+ Revision history is at the top of this file
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ UINT16 Size; ///< Offset 28 The size of this structure, in bytes. Must be the first entry in this structure.
+ UINT8 HobBufferSize; ///< Offset 30 Size of HOB buffer for MRC
+
+ UINT8 SpdProfileSelected; ///< Offset 31 SPD XMP profile selection - for XMP supported DIMM: <b>0=Default DIMM profile</b>, 1=Custom Profile, 2=XMP Profile 1, 3=XMP Profile 2, 4=XMP Profile 3, 5=XMP User Profile 4, 6=XMP User Profile 5
+
+ // The following parameters are used only when SpdProfileSelected is User Defined (CUSTOM_PROFILE)
+ UINT16 tCL; ///< Offset 32 User defined Memory Timing tCL value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 31=Maximum.
+ UINT16 tRCDtRP; ///< Offset 34 User defined Memory Timing tRCD value (same as tRP), valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 63=Maximum
+ UINT16 tRAS; ///< Offset 36 User defined Memory Timing tRAS value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 64=Maximum.
+ UINT16 tWR; ///< Offset 38 User defined Memory Timing tWR value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, 20, 24.
+ UINT16 tRFC; ///< Offset 40 User defined Memory Timing tRFC value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 1023=Maximum.
+ UINT16 tRRD; ///< Offset 42 User defined Memory Timing tRRD value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 15=Maximum.
+ UINT16 tWTR; ///< Offset 44 User defined Memory Timing tWTR value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 28=Maximum.
+ UINT16 tRTP; ///< Offset 46 User defined Memory Timing tRTP value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 15=Maximum. DDR4 legal values: 5, 6, 7, 8, 9, 10, 12
+ UINT16 tFAW; ///< Offset 48 User defined Memory Timing tFAW value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 63=Maximum.
+ UINT16 tCWL; ///< Offset 50 User defined Memory Timing tCWL value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 20=Maximum.
+ UINT16 tREFI; ///< Offset 52 User defined Memory Timing tREFI value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 65535=Maximum.
+ UINT16 PciIndex; ///< Offset 54 Pci index register address: <b>0xCF8=Default</b>
+ UINT16 PciData; ///< Offset 56 Pci data register address: <b>0xCFC=Default</b>
+ UINT16 VddVoltage; ///< Offset 58 DRAM voltage (Vdd) in millivolts: <b>0=Platform Default (no override)</b>, 1200=1.2V, 1350=1.35V etc.
+ UINT16 Idd3n; ///< Offset 60 EPG Active standby current (Idd3N) in milliamps from DIMM datasheet.
+ UINT16 Idd3p; ///< Offset 62 EPG Active power-down current (Idd3P) in milliamps from DIMM datasheet.
+
+ UINT32 EccSupport:1; ///< Offset 64 Bit 0 - DIMM Ecc Support option - for Desktop only: 0=Disable, <b>1=Enable</b>
+ UINT32 MrcSafeConfig:1; ///< Bit 1 - MRC Safe Mode: <b>0=Disable</b>, 1=Enable
+ UINT32 RemapEnable:1; ///< Bit 2 - This option is used to control whether to enable/disable memory remap above 4GB: 0=Disable, <b>1=Enable</b>.
+ UINT32 ScramblerSupport:1; ///< Bit 3 - Memory scrambler support: 0=Disable, <b>1=Enable</b>
+ UINT32 Vc1ReadMeter:1; ///< Bit 4 - VC1 Read Metering Enable: 0=Disable, <b>1=Enable</b>
+ UINT32 ForceSingleSubchannel:1; ///< Bit 5 - TRUE means use SubChannel0 only (for LPDDR4): <b>0=Disable</b>, 1=Enable
+ UINT32 SimicsFlag:1; ///< Bit 6 - Option to Enable SIMICS: 0=Disable, <b>1=Enable</b>
+ UINT32 Ddr4DdpSharedClock:1; ///< Bit 7 - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP package. <b>0=Not shared</b>, 1=Shared
+ UINT32 SharedZqPin:1; ///< Bit 8 - Select if the ZQ resistor is shared between Ranks in DDR4/LPDDR4 DRAM Packages <b>0=Not Shared</b>, 1=Shared
+ UINT32 LpDqsOscEn:1; ///< Bit 9 - LPDDR Write DQ/DQS Retraining: 0=Disable, <b>1=Enable</b>
+ UINT32 RmtPerTask:1; ///< Bit 10 - Rank Margin Tool Per Task. <b>0 = Disabled</b>, 1 = Enabled
+ UINT32 TrainTrace:1; ///< Bit 11 - Trained state tracing debug. <b>0 = Disabled</b>, 1 = Enabled
+ UINT32 SafeMode:1; ///< Bit 12 - Define if safe mode is enabled for MC/IO
+ UINT32 MsHashEnable:1; ///< Bit 13 - Controller Hash Enable: 0=Disable, <b>1=Enable</b>
+ UINT32 DisPgCloseIdleTimeout:1; ///< Bit 14 - Disable Page Close Idle Timeout: 0=Enable, <b>1=Disable</b>
+ UINT32 Ibecc:1; ///< Bit 15 - In-band ECC: <b>0=Disable</b>, 1=Enable
+ UINT32 IbeccOperationMode:2; ///< Bits 16:17 - In-band ECC Operation Mode: 0=Functional Mode protects requests based on the address range, 1=Makes all requests non protected and ignore range checks, <b>2=Makes all requests protected and ignore range checks</b>
+ UINT32 ChHashOverride:1; ///< Bit 18 - Select if Channel Hash setting values will be taken from input parameters or automatically taken from POR values depending on DRAM type detected.
+ UINT32 EccDftEn:1; ///< Bit 19 - ECC DFT support option
+ UINT32 Write0:1; ///< Bit 20 - Write0 feature (LP5/DDR5): 0=Disable, <b>1=Enable</b>
+ UINT32 ReuseAdlSDdr5Board:1; ///< Bit 21 - Indicate whether adl ddr5 board is reused.
+ UINT32 PeriodicDcc:1; ///< Bit 22 - Periodic DCC: <b>0=Disable</b>, 1=Enable
+ UINT32 LpMode:2; ///< Bit 23:24 - LPMode: <b>0=Auto</b>, 1=Enabled, 2=Disabled, 3=Reserved
+ UINT32 RsvdO64B25to31:7; ///< Bits 25:31 reserved
+ UINT8 DisableChannel[MEM_CFG_MAX_CONTROLLERS][MEM_CFG_MAX_CHANNELS]; ///< Offset 68-75
+ UINT8 Ratio; ///< Offset 76 DDR Frequency ratio, to multiply by 133 or 100 MHz depending on RefClk. <b>0 = Auto</b>
+ UINT8 ProbelessTrace; ///< Offset 77 Probeless Trace: <b>0=Disabled</b>, <b>1=Enabled</b>
+ /**
+ Channel Hash Enable.\n
+ NOTE: BIT7 will interleave the channels at a 2 cache-line granularity, BIT8 at 4 and BIT9 at 8\n
+ 0=BIT6, <B>1=BIT7</B>, 2=BIT8, 3=BIT9
+ **/
+ UINT8 ChHashInterleaveBit; ///< Offset 78 Option to select interleave Address bit. Valid values are 0 - 3 for BITS 6 - 9 (Valid values for BDW are 0-7 for BITS 6 - 13)
+ UINT8 SmramMask; ///< Offset 79 Reserved memory ranges for SMRAM
+ UINT32 BClkFrequency; ///< Offset 80 Base reference clock value, in Hertz: <b>100000000 = 100Hz</b>, 125000000=125Hz, 167000000=167Hz, 250000000=250Hz
+
+ /// Training Algorithms 1 Offset 84
+ UINT32 ECT:1; ///< Bit 0 - Enable/Disable Early Command Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 SOT:1; ///< Bit 1 - Enable/Disable Sense Amp Offset Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 ERDMPRTC2D:1; ///< Bit 2 - Enable/Disable Early ReadMPR Timing Centering 2D. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RDMPRT:1; ///< Bit 3 - Enable/Disable Read MPR Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RCVET:1; ///< Bit 4 - Enable/Disable Receive Enable Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 JWRL:1; ///< Bit 5 - Enable/Disable JEDEC Write Leveling Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 EWRTC2D:1; ///< Bit 6 - Enable/Disable Early Write Time Centering 2D Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 ERDTC2D:1; ///< Bit 7 - Enable/Disable Early Read Time Centering 2D Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 WRTC1D:1; ///< Bit 8 - Enable/Disable 1D Write Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 WRVC1D:1; ///< Bit 9 - Enable/Disable 1D Write Voltage Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RDTC1D:1; ///< Bit 10 - Enable/Disable 1D Read Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 DIMMODTT:1; ///< Bit 11 - Enable/Disable DIMM ODT Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 DIMMRONT:1; ///< Bit 12 - Enable/Disable DIMM RON training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 WRDSEQT:1; ///< Bit 13 - Enable/Disable Write Drive Strength / Equalization Training 2D. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 WRSRT:1; ///< Bit 14 - Enable/Disable Write Slew Rate traning. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable.</b>
+ UINT32 RDODTT:1; ///< Bit 15 - Enable/Disable Read ODT Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 RDEQT:1; ///< Bit 16 - Enable/Disable Read Equalization Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 RDAPT:1; ///< Bit 17 - Enable/Disable Read Amplifier Power Training. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 WRTC2D:1; ///< Bit 18 - Enable/Disable 2D Write Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RDTC2D:1; ///< Bit 19 - Enable/Disable 2D Read Timing Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 WRVC2D:1; ///< Bit 20 - Enable/Disable 2D Write Voltage Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RDVC2D:1; ///< Bit 21 - Enable/Disable 2D Read Voltage Centering Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 CMDVC:1; ///< Bit 22 - Enable/Disable Command Vref Centering Training. Note it is not recommended to change this setting from the default value 0=Disable, <b>1=Enable</b>.
+ UINT32 LCT:1; ///< Bit 23 - Enable/Disable Late Command Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 RTL:1; ///< Bit 24 - Enable/Disable Round Trip Latency function. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 TAT:1; ///< Bit 25 - Enable/Disable Turn Around Time function. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable.
+ UINT32 RMT:1; ///< Bit 26 - Enable/Disable Rank Margin Tool function: <b>0=Disable</b>, 1=Enable.
+ UINT32 MEMTST:1; ///< Bit 27 - Enable/Disable Memory Test function: <b>0=Disable</b>, 1=Enable.
+ UINT32 ALIASCHK:1; ///< Bit 28 - Enable/Disable DIMM SPD Alias Check: 0=Disable, <b>1=Enable</b>
+ UINT32 RCVENC1D:1; ///< Bit 29 - Enable/Disable Receive Enable Centering Training (LPDDR Only). Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable
+ UINT32 RMC:1; ///< Bit 30 - Enable/Disable Retrain Margin Check. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable
+ UINT32 WRDSUDT:1; ///< Bit 31 - Enable/Disable Write Drive Strength Up/Dn independently. Note it is not recommended to change this setting from the default value: <b>0=Disable</b>, 1=Enable
+ /// Training Algorithms 2 Offset 88
+ UINT32 DCC : 1; ///< Bit 0 - Enable/Disable Duty Cycle Correction: 0=Disable, 1=Enable.
+ UINT32 RDVC1D : 1; ///< Bit 1 - Enable/Disable Read Voltage Centering 1D: 0=Disable, 1=Enable.
+ UINT32 TXTCO : 1; ///< Bit 2 - Enable/Disable Write TCO Comp Training: 0=Disable, 1=Enable.
+ UINT32 CLKTCO : 1; ///< Bit 3 - Enable/Disable Clock TCO Comp Training: 0=Disable, 1=Enable.
+ UINT32 CMDSR : 1; ///< Bit 4 - Enable/Disable CMD Slew Rate Training: 0=Disable, 1=Enable.
+ UINT32 CMDDSEQ : 1; ///< Bit 5 - Enable/Disable CMD Drive Strength and Tx Equalization: 0=Disable, 1=Enable.
+ UINT32 DIMMODTCA : 1; ///< Bit 6 - Enable/Disable Dimm ODT CA Training: 0=Disable, 1=Enable.
+ UINT32 TXTCODQS : 1; ///< Bit 7 - Enable/Disable Write TCO Dqs Training: 0=Disable, 1=Enable.
+ UINT32 CMDDRUD : 1; ///< Bit 8 - Enable/Disable CMD/CTL Drive Strength Up/Dn 2D: 0=Disable, 1=Enable.
+ UINT32 VCCDLLBP : 1; ///< Bit 9 - Enable/Disable VccDLL bypass to VccIOG training: 0=Disable, 1=Enable.
+ UINT32 PVTTDNLP : 1; ///< Bit 10 - Enable/Disable PanicVttDnLp Training: 0=Disable, 1=Enable.
+ UINT32 RDVREFDC : 1; ///< Bit 11 - Enable/Disable Read Vref Decap Training: 0=Disable, 1=Enable.
+ UINT32 VDDQT : 1; ///< Bit 12 - Enable/Disable Vddq Training: 0=Disable, 1=Enable.
+ UINT32 RMTBIT : 1; ///< Bit 13 - Enable/Disable Rank Margin Tool Per Bit: 0=Disable, 1=Enable.
+ UINT32 PDA : 1; ///< BIT 14 - Enable/Disable PDA Enumeration Training. Note it is not recommended to change this setting from the default value: 0=Disable, <b>1=Enable</b>.
+ UINT32 DIMMDFE : 1; ///< BIT 15 - Enable/Disable DIMM DFE Training: 0=Disable, <b>1=Enable</b>.
+ UINT32 TXDQSDCC : 1; ///< BIT 16 - Enable/Disable TX DQS DCC Training: 0=Disable, <b>1=Enable</b>.
+ UINT32 DRAMDCA : 1; ///< BIT 17 - Enable/Disable DRAM DCA Training: 0=Disable, <b>1=Enable</b>.
+ UINT32 WRDS : 1; ///< BIT 18 - Enable/Disable Write Driver Strength Training: 0=Disable, <b>1=Enable</b>.
+ UINT32 EARLYDIMMDFE : 1; ///< BIT 19 - Enable/Disable EARLY DIMM DFE Training: 0=Disable, <b>1=Enable</b>.
+ UINT32 ReservedBits2 :12; ///< Bits 20:31 - Reserved
+
+ UINT32 MrcTimeMeasure:1; ///< Offset 92 Bit 0 - Enables serial debug level to display the MRC execution times only: <b>0=Disable</b>, 1=Enable
+ UINT32 MrcFastBoot:1; ///< Bit 1 - Enables the MRC fast boot path for faster cold boot execution: 0=Disable, <b>1=Enable</b>
+ UINT32 DqPinsInterleaved:1; ///< Bit 2 - Interleaving mode of DQ/DQS pins which depends on board routing: <b>0=Disable</b>, 1=Enable
+ UINT32 RankInterleave:1; ///< Bit 3 - Rank Interleave Mode: 0=Disable, <b>1=Enable</b>
+ UINT32 EnhancedInterleave:1; ///< Bit 4 - Enhanced Interleave Mode: 0=Disable, <b>1=Enable</b>
+ UINT32 WeaklockEn:1; ///< Bit 5 - Weak Lock Enable: 0=Disable, <b>1=Enable</b>
+ UINT32 ChHashEnable:1; ///< Bit 6 - Channel Hash Enable: 0=Disable, <b>1=Enable</b>
+ UINT32 EnablePwrDn:1; ///< Bit 7 - Enable Power Down control for DDR: 0=PCODE control, <b>1=BIOS control</b>
+ UINT32 EnablePwrDnLpddr:1; ///< Bit 8 - Enable Power Down for LPDDR: 0=PCODE control, <b>1=BIOS control</b>
+ UINT32 SrefCfgEna:1; ///< Bit 9 - Enable Self Refresh: 0=Disable, <b>1=Enable</b>
+ UINT32 ThrtCkeMinDefeatLpddr:1; ///< Bit 10 - Throttler CKE min defeature for LPDDR: 0=Disable, <b>1=Enable</b>
+ UINT32 ThrtCkeMinDefeat:1; ///< Bit 11 - Throttler CKE min defeature: <b>0=Disable</b>, 1=Enable
+ UINT32 AutoSelfRefreshSupport:1; ///< Bit 12 - FALSE = No auto self refresh support, <b>TRUE = auto self refresh support</b>
+ UINT32 ExtTemperatureSupport:1; ///< Bit 13 - FALSE = No extended temperature support, <b>TRUE = extended temperature support</b>
+ UINT32 MobilePlatform:1; ///< Bit 14 - Memory controller device id indicates: <b>TRUE if mobile</b>, FALSE if not. Note: This will be auto-detected and updated.
+ UINT32 Force1Dpc:1; ///< Bit 15 - TRUE means force one DIMM per channel, <b>FALSE means no limit</b>
+ UINT32 ForceSingleRank:1; ///< Bit 16 - TRUE means use Rank0 only (in each DIMM): <b>0=Disable</b>, 1=Enable
+ UINT32 VttTermination:1; ///< Bit 17 - Vtt Termination for Data ODT: <b>0=Disable</b>, 1=Enable
+ UINT32 VttCompForVsshi:1; ///< Bit 18 - Enable/Disable Vtt Comparator For Vsshi: <b>0=Disable</b>, 1=Enable
+ UINT32 ExitOnFailure:1; ///< Bit 19 - MRC option for exit on failure or continue on failure: 0=Disable, <b>1=Enable</b>
+ UINT32 NewFeatureEnable1:1; ///< Bit 20 - Generic enable knob for new feature set 1 <b>0: Disable </b>; 1: Enable
+ UINT32 NewFeatureEnable2:1; ///< Bit 21 - Generic enable knob for new feature set 2 <b>0: Disable </b>; 1: Enable
+ UINT32 RhSelect:2; ///< Bit 22-23 - RH Select: <b>0=Disable</b>, 1=RFM, 2=pTRR
+ UINT32 RefreshPanicWm:4; ///< Bit 24-27 - Deprecated from revision 17. Use RefreshWm instead.
+ UINT32 RefreshHpWm:4; ///< Bit 28-31 - Deprecated from revision 17. Use RefreshWm instead.
+ UINT32 VddSettleWaitTime; ///< Offset 96 Amount of time in microseconds to wait for Vdd to settle on top of 200us required by JEDEC spec: <b>Default=0</b>
+ UINT16 SrefCfgIdleTmr; ///< Offset 100 Self Refresh idle timer: <b>512=Minimal</b>, 65535=Maximum
+ UINT16 ChHashMask; ///< Offset 102 Channel Hash Mask: 0x0001=BIT6 set(Minimal), 0x3FFF=BIT[19:6] set(Maximum), <b>0x30CE= BIT[19:18, 13:12 ,9:7] set</b>
+ UINT16 DdrFreqLimit; ///< Offset 104 Memory Frequency limit: <b>0 = Auto</b>, or memory speed value in MT/s: 1067, 1333, 1600 etc. See the possible values in MrcInterface.h
+ UINT8 MaxRttWr; ///< Offset 106 Maximum DIMM RTT_WR to use in power training: <b>0=ODT Off</b>, 1 = 120 ohms
+ UINT8 ThrtCkeMinTmr; ///< Offset 107 Throttler CKE min timer: 0=Minimal, 0xFF=Maximum, <b>0x00=Default</b>
+ UINT8 ThrtCkeMinTmrLpddr; ///< Offset 108 Throttler CKE min timer for LPDDR: 0=Minimal, 0xFF=Maximum, <b>0x00=Default</b>
+ BOOLEAN PerBankRefresh; ///< Offset 109 Enables and Disables the per bank refresh. This only impacts memory technologies that support PBR: LPDDR4, LPDDR5 and DDR5. FALSE=Disabled, <b>TRUE=Enabled</b>
+ UINT8 SaGv; ///< Offset 110 SA GV: <b>0=Disabled</b>, 1=Point1, 2=Point2, 3=Point3, 4=Point4, 5=Enabled
+ UINT8 NModeSupport; ///< Offset 111 Memory N Mode Support - Enable user to select Auto, 1N or 2N: <b>0=AUTO</b>, 1=1N, 2=2N.
+ UINT8 RefClk; ///< Offset 112 Selects the DDR base reference clock. 0x01 = 100MHz, <b>0x00 = 133MHz</b>
+ UINT8 EnCmdRate; ///< Offset 113 CMD Rate Enable: 0=Disable, 5=2 CMDs, <b>7=3 CMDs</b>, 9=4 CMDs, 11=5 CMDs, 13=6 CMDs, 15=7 CMDs
+ UINT8 Refresh2X; ///< Offset 114 Refresh 2x: <b>0=Disable</b>, 1=Enable for WARM or HOT, 2=Enable for HOT only
+ UINT8 EpgEnable; ///< Offset 115 Enable Energy Performance Gain.
+ UINT8 UserThresholdEnable; ///< Offset 116 Flag to manually select the DIMM CLTM Thermal Threshold, 0=Disable, 1=Enable, <b>0=Default</b>
+ UINT8 UserBudgetEnable; ///< Offset 117 Flag to manually select the Budget Registers for CLTM Memory Dimms , 0=Disable, 1=Enable, <b>0=Default</b>
+ UINT8 RetrainOnFastFail; ///< Offset 118 Restart MRC in Cold mode if SW MemTest fails during Fast flow. 0 = Disabled, <b>1 = Enabled</b>
+ UINT8 PowerDownMode; ///< Offset 119 CKE Power Down Mode: <b>0xFF=AUTO</b>, 0=No Power Down, 1= APD mode, 6=PPD-DLL Off mode
+ UINT8 PwdwnIdleCounter; ///< Offset 120 CKE Power Down Mode Idle Counter: 0=Minimal, 255=Maximum, <b>0x80=0x80 DCLK</b>
+ UINT8 CmdRanksTerminated; ///< Offset 121 LPDDR: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, Rank0 is terminating and Rank1 is non-terminating</b>
+ UINT16 MsHashMask; ///< Offset 122 Controller Hash Mask: 0x0001=BIT6 set(Minimal), 0x3FFF=BIT[19:6] set(Maximum), <b>0x30CE= BIT[19:18, 13:12 ,9:7] set</b>
+ UINT32 Lp5CccConfig; ///< Offset 124 BitMask where bits [3:0] are controller 0 Channel [3:0] and [7:4] are Controller 1 Channel [3:0]. 0 selects Ascending mapping and 1 selects Descending mapping.
+ UINT8 RMTLoopCount; ///< Offset 128 Indicates the Loop Count to be used for Rank Margin Tool Testing: 1=Minimal, 32=Maximum, 0=AUTO, <b>0=Default</b>
+ UINT8 MsHashInterleaveBit; ///< Offset 129 Option to select interleave Address bit. Valid values are 0 - 3 for BITS 6 - 9
+ UINT8 GearRatio; ///< Offset 130 Gear mode when SAGV is disabled: <b>0=Auto</b>, 1 - Gear1, 2 - Gear2, 4 - Gear4.
+ UINT8 Ddr4OneDpc; ///< Offset 131 DDR4 1DPC performance feature: 0 - Disabled; 1 - Enabled on DIMM0 only, 2 - Enabled on DIMM1 only; 3 - Enabled on both DIMMs. (bit [0] - DIMM0, bit [1] - DIMM1)
+ UINT32 BclkRfiFreq[MEM_MAX_SAGV_POINTS]; ///< Offset 132 Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz <b>0 - No RFI Tuning</b>. Range is 98Mhz-100Mhz.
+ UINT16 SaGvFreq[MEM_MAX_SAGV_POINTS]; ///< Offset 148 Frequency per SAGV point. 0 is Auto, otherwise holds the frequency value expressed as an integer: <b>0=Default</b>, 1067, 1333, 1600, 1800, 1867, etc.
+ UINT8 SaGvGear[MEM_MAX_SAGV_POINTS]; ///< Offset 156 Gear ratio per SAGV point. 0 is Auto, otherwise holds the Gear ratio expressed as an integer: <b>0=Auto</b>, 1, 2, 4
+ UINT8 IbeccProtectedRangeEnable[MEM_MAX_IBECC_REGIONS]; ///< Offset 160 Enable use of address range for ECC Protection: <b>0=Disabled</b>, 1=Enabled
+ UINT32 IbeccProtectedRangeBase[MEM_MAX_IBECC_REGIONS]; ///< Offset 168 Base address for address range of ECC Protection: [0..0x3FFFFFF]
+ UINT32 IbeccProtectedRangeMask[MEM_MAX_IBECC_REGIONS]; ///< Offset 200 Mask address for address range of ECC Protection: [1..0x3FFFFFF]
+
+ UINT8 McRefresh2X; ///< Offset 232 Deprecated from revision 19, use McRefreshRate instead
+ UINT8 Lfsr0Mask; ///< Offset 233 RH pTRR LFSR0 Mask
+ UINT8 Lfsr1Mask; ///< Offset 234 RH pTRR LFSR1 Mask
+ UINT8 CmdMirror; ///< Offset 235 BitMask where bits [3:0] are controller 0 Channel [3:0] and [7:4] are Controller 1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror.
+ UINT8 AllowOppRefBelowWriteThrehold; ///< Offset 236 Option to allow opportunistic refreshes while we don't exit power down.
+ UINT8 WriteThreshold; ///< Offset 237 Option to set number of writes that can be accumulated while CKE is low before CKE is asserted.
+ UINT8 PprEnable; ///< Offset 238 Post-Package Repair: 0: Disabled, 2: Hard PPR
+ UINT8 MarginLimitCheck; ///< Offset 239 Margin limit check enable: <b>0=Disable</b>, 1=L1 only, 2=L2 only, 3=Both L1 and L2
+ UINT16 MarginLimitL2; ///< Offset 240 Margin limit check L2 threshold: <b>100=Default</b>
+ UINT8 LpddrRttWr; ///< Offset 242 Initial RttWr for LP4/5 in Ohms, 0 means Auto
+ UINT8 LpddrRttCa; ///< Offset 243 Initial RttCa for LP4/5 in Ohms, 0 means Auto
+ UINT16 VddqVoltage; ///< Offset 244 DRAM voltage (Vddq) in millivolts: <b>0=Platform Default (no override)</b>, 1200=1.2V, 1350=1.35V etc.
+ UINT16 VppVoltage; ///< Offset 246 DRAM voltage (Vpp) in millivolts: <b>0=Platform Default (no override)</b>, 1800=1.8V, 2050=2.05V etc.
+ UINT8 ExtendedBankHashing; ///< Offset 248 Enable EBH (Extended Bank Hashing): 0=Disabled; <b>1 = Enabled</b>
+ UINT8 DynamicMemoryBoost; ///< Offset 249 Enable/Disable Dynamic Memory Boost Feature. Only valid if SpdProfileSelected is an XMP Profile; otherwise ignored. <b>0=Disabled</b>, 1=Enabled.
+ UINT8 IbeccErrInjControl; ///< Offset 250 In-band ECC: Error Injection Control 0: No Error Injection, 1:Inject Correctable Error Address match, 3:Inject Correctable Error on insertion counter, 5: Inject Uncorrectable Error Address match, 7:Inject Uncorrectable Error on insertion counter
+ UINT8 RealtimeMemoryFrequency; ///< Offset 251 Enable/Disable Realtime Memory Frequency feature. Only valid if SpdProfileSelected is an XMP Profile; otherwise ignored. <b>0=Disabled</b>, 1=Enabled.
+ UINT32 IbeccErrInjCount; ///< Offset 252 Number of transactions between ECC error injection
+ UINT64 IbeccErrInjAddress; ///< Offset 256 Address to match against for ECC error injection
+ UINT64 IbeccErrInjMask; ///< Offset 264 Mask to match against for ECC error injection
+ UINT8 RefreshWm; ///< Offset 272 Refresh Watermarks, 0 = Low, <b>1 = High</b>
+ UINT8 McRefreshRate; ///< Offset 273 Type of solution to be used for RHP - 0/1/2/3 = RefreshNORMAL/Refresh1x/Refresh2x/Refresh4x
+ UINT8 Reserved274[2]; ///< Offset 274-275 Reserved for natural alignment
+ UINT32 DebugValue; ///< Offset 276 Debug Value for general use
+ UINT16 tRFCpb; ///< Offset 280 User defined Memory Timing tRFCpb value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 28=Maximum.
+ UINT16 tRFC2; ///< Offset 282 User defined Memory Timing tRFC2 value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 28=Maximum.
+ UINT16 tRFC4; ///< Offset 284 User defined Memory Timing tRFC4 value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 28=Maximum.
+ UINT16 tRRD_L; ///< Offset 286 User defined Memory Timing tRRD_L value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 28=Maximum.
+ UINT16 tRRD_S; ///< Offset 288 User defined Memory Timing tRRD_S value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 28=Maximum.
+ UINT16 tWTR_L; ///< Offset 290 User defined Memory Timing tWTR_L value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 28=Maximum.
+ UINT16 tCCD_L; ///< Offset 292 User defined Memory Timing tCCD_L value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 28=Maximum.
+ UINT16 tWTR_S; ///< Offset 294 User defined Memory Timing tWTR_S value, valid when SpdProfileSelected is CUSTOM_PROFILE: <b>0=AUTO</b>, 28=Maximum.
+ UINT64 EccErrInjAddress; ///< Offset 296 Address to match against for ECC error injection
+ UINT64 EccErrInjMask; ///< Offset 304 Mask to match against for ECC error injection
+ UINT32 EccErrInjCount; ///< Offset 312 Number of transactions between ECC error injection
+
+
+ UINT16 FreqLimitMixedConfig; ///< Offset 316 Override the reduced speed in mixed 2DPC config or non-POR 2DPC config. <b>0=Auto</b>, otherwise speed in MT/s: 1067, 1333 etc. See the possible values in MrcInterface.h
+ UINT8 FirstDimmBitMask; ///< Offset 318 Defines which DIMM should be populated first on a 2DPC board.
+ ///< 4 bit mask: Bit[0]: MC0 DIMM0, Bit[1]: MC0 DIMM1, Bit[2]: MC1 DIMM0, Bit[3]: MC1 DIMM1.
+ ///< For each MC, the first DIMM to be populated should be set to '1'.
+ ///< Note: this mask is only for non-ECC DIMM.
+ UINT8 UserBd; ///< Offset 319 MrcBoardType
+ ///< 1 - Desktop 1DPC
+ ///< 2 - Desktop 2DPC, Daisy Chain, far DIMM should be populated first
+ ///< 3 - Desktop 2DPC, T-topology with asymmetrical DIMM0/1 routing, has particular DIMM population order
+ ///< 4 - Desktop 2DPC, T-topology with symmetrical DIMM0/1 routing, no particular DIMM population order
+ ///< 5 - ULT Mobile
+ UINT8 SagvSwitchFactorIA; ///< Offset 320 Sagv Switch Factor: <b>1 </b>, 50=Maximum, default 30.
+ UINT8 SagvSwitchFactorGT; ///< Offset 321 Sagv Switch Factor: <b>1 </b>, 50=Maximum, default 30.
+ UINT8 SagvSwitchFactorIO; ///< Offset 322 Sagv Switch Factor: <b>1 </b>, 50=Maximum, default 30.
+ UINT8 SagvSwitchFactorStall; ///< Offset 323 Sagv Switch Factor: <b>1 </b>, 50=Maximum, default 30.
+ UINT8 SagvHeuristicsUpControl;///< Offset 324 Sagv duration in ms before heuristics up: <b>1 </b>, 50=Maximum, default 1ms.
+ UINT8 SagvHeuristicsDownControl; ///< Offset 325 Sagv duration in ms before heuristics down: <b>1 </b>, 50=Maximum, default 1ms.
+ UINT16 FreqLimitMixedConfig_1R1R_8GB; ///< Offset 326 The frequency limit for mixed DIMM configuration 1R1R_8GB (1R 8GB and 1R 8GB in one channel).
+ ///< It's to be set by customer. Customer can connect it to a setup option, or an UPD, etc. By default, the value will be 2000.
+ UINT16 FreqLimitMixedConfig_1R1R_16GB; ///< Offset 328 The frequency limit for mixed DIMM configuration 1R1R_16GB (1R 16GB and 1R 16GB in one channel).
+ ///< It's to be set by customer. Customer can connect it to a setup option, or an UPD, etc. By default, the value will be 2000.
+ UINT16 FreqLimitMixedConfig_1R1R_8GB_16GB; ///< Offset 330 The frequency limit for mixed DIMM configuration 1R1R_8GB_16GB (1R 8GB and 1R 16GB in one channel).
+ ///< It's to be set by customer. Customer can connect it to a setup option, or an UPD, etc. By default, the value will be 2000.
+ UINT16 FreqLimitMixedConfig_2R2R; ///< Offset 332 The frequency limit for mixed DIMM configuration 2R_2R (2R 32GB and 2R 32GB in one channel).
+ ///< It's to be set by customer. Customer can connect it to a setup option, or an UPD, etc. By default, the value will be 2000.
+ UINT16 LctCmdEyeWidth; ///< Offset 334 LCT Command eyewidth
+ UINT8 FirstDimmBitMaskEcc; ///< Offset 336 Defines which ECC DIMM should be populated first on a 2DPC board.
+ ///< 4 bit mask: Bit[0]: MC0 DIMM0, Bit[1]: MC0 DIMM1, Bit[2]: MC1 DIMM0, Bit[3]: MC1 DIMM1.
+ ///< For each MC, the first DIMM to be populated should be set to '1'.
+ ///< For example, if one MC is T-topology, there is no special population rule, can put it as 11 for this MC and it means either D0 or D1 can be
+ ///< be populated firstly.
+ ///< Note: this mask is only for ECC DIMM, not for non-ECC DIMM.
+ UINT8 Lp5BankMode; ///< Offset 337 LP5 Bank Mode
+ UINT8 OverloadSAM; ///< Offset 338 Overload SAM to copy the sagv frquency point.
+ UINT8 Reserved339[5]; ///< Offset 339-343 Reserved for natural alignment
+} MEMORY_CONFIGURATION;
+
+/// Memory Configuration
+/// The contents of this structure are not CRC'd by the MRC for option change detection.
+/// <b>Revision 1</b>: - Initial version.
+/// <b>Revision 2</b>: - Added MemTestOnWarmBoot
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ SA_FUNCTION_CALLS SaCall; ///< Offset 28 Function calls into the SA.
+ SA_MEMORY_FUNCTIONS MrcCall; ///< Offset 212 Function calls into the MRC.
+ SPD_DATA_BUFFER *SpdData; ///< Offset 236 Memory SPD data, will be used by the MRC when SPD SmBus address is zero.
+ SA_MEMORY_DQDQS_MAPPING *DqDqsMap; ///< Offset 240 LPDDR DQ bit and DQS byte swizzling between CPU and DRAM.
+ SA_MEMORY_RCOMP *RcompData; ///< Offset 244 DDR RCOMP resistors and target values.
+ UINT64 PlatformMemorySize; ///< Offset 248 The minimum platform memory size required to pass control into DXE
+ UINT32 CleanMemory:1; ///< Offset 256 Ask MRC to clear memory content: <b>FALSE=Do not Clear Memory</b>; TRUE=Clear Memory
+ UINT32 ReservedBits5:31;
+ /**
+ Sets the serial debug message level\n
+ 0x00 = Disabled\n
+ 0x01 = Errors only\n
+ 0x02 = Errors and Warnings\n
+ <b>0x03 = Errors, Warnings, and Info</b>\n
+ 0x04 = Errors, Warnings, Info, and Events\n
+ 0x05 = Displays Memory Init Execution Time Summary only\n
+ **/
+ UINT8 SerialDebugLevel; ///< Offset 260
+ UINT8 MemTestOnWarmBoot; ///< Offset 261 Run Base Memory Test On WarmBoot: 0=Disabled, <b>1=Enabled</b>
+ UINT8 Reserved11[2]; ///< Offset 262 - 263 Reserved
+} MEMORY_CONFIG_NO_CRC;
+#pragma pack(pop)
+
+#endif // _MEMORY_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PchDmi/PchDmiConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PchDmi/PchDmiConfig.h
new file mode 100644
index 0000000000..84cc21091f
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PchDmi/PchDmiConfig.h
@@ -0,0 +1,65 @@
+/** @file
+ DMI policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _PCH_DMI_CONFIG_H_
+#define _PCH_DMI_CONFIG_H_
+
+extern EFI_GUID gPchDmiConfigGuid;
+
+/*
+<b>Revision 1</b>: - Initial version.
+*/
+#define PCH_DMI_PREMEM_CONFIG_REVISION 1
+extern EFI_GUID gPchDmiPreMemConfigGuid;
+
+#pragma pack (push,1)
+
+#define PCH_DMI_HWEQ_COEFFS_MAX 8
+/**
+ Lane specific Dmi Gen3, Gen4 equalization parameters.
+**/
+typedef struct {
+ UINT8 Cm; ///< Coefficient C-1
+ UINT8 Cp; ///< Coefficient C+1
+ UINT8 Rsvd0[2]; ///< Reserved bytes
+} PCH_DMI_EQ_PARAM;
+
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block
+ PCH_DMI_EQ_PARAM DmiHwEqGen3CoeffList[PCH_DMI_HWEQ_COEFFS_MAX];
+ UINT8 DmiHweq;
+ UINT8 Reserved[3];
+} PCH_DMI_PREMEM_CONFIG;
+
+
+/**
+ The PCH_DMI_CONFIG block describes the expected configuration of the PCH for DMI.
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+
+ UINT32 PwrOptEnable : 1; ///< <b>0: Disable</b>; 1: Enable DMI Power Optimizer on PCH side.
+ UINT32 DmiAspmCtrl : 8; ///< ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b>
+ UINT32 CwbEnable : 1; ///< 0: Disable; <b>1: Enable</b> Central Write Buffer feature configurable and enabled by default
+ UINT32 L1RpCtl : 1; ///< 0: Disable; <b>1: Enable</b> Allow DMI enter L1 when all root ports are in L1, L0s or link down. Disabled by default.
+ /**
+ When set to TRUE turns on:
+ - L1 State Controller Power Gating
+ - L1 State PHY Data Lane Power Gating
+ - PHY Common Lane Power Gating
+ - Hardware Autonomous Enable
+ - PMC Request Enable and Sleep Enable
+ **/
+ UINT32 DmiPowerReduction : 1;
+ UINT32 ClockGating : 1; ///< 0: Disable; 1: Enable clock gating.
+ UINT32 Rsvdbits : 19; ///< Reserved bits
+} PCH_DMI_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _PCH_DMI_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PchPcieRp/PchPcieRpConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PchPcieRp/PchPcieRpConfig.h
new file mode 100644
index 0000000000..d97f3b878a
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PchPcieRp/PchPcieRpConfig.h
@@ -0,0 +1,180 @@
+/** @file
+ PCH Pcie root port policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _PCH_PCIERP_CONFIG_H_
+#define _PCH_PCIERP_CONFIG_H_
+
+#include <PchLimits.h>
+#include <PcieConfig.h>
+#include <ConfigBlock.h>
+
+
+
+
+
+/*
+ Making any setup structure change after code frozen
+ will need to maintain backward compatibility, bump up
+ structure revision and update below history table\n
+
+<b>Revision 1</b>: - Initial version.
+*/
+#define PCIE_RP_DXE_CONFIG_REVISION 1
+
+extern EFI_GUID gPchPcieConfigGuid;
+extern EFI_GUID gPcieRpPreMemConfigGuid;
+
+#pragma pack (push,1)
+
+typedef enum {
+ PchPcieOverrideDisabled = 0,
+ PchPcieL1L2Override = 0x01,
+ PchPcieL1SubstatesOverride = 0x02,
+ PchPcieL1L2AndL1SubstatesOverride = 0x03,
+ PchPcieLtrOverride = 0x04
+} PCH_PCIE_OVERRIDE_CONFIG;
+
+///
+/// The values before AutoConfig match the setting of PCI Express Base Specification 1.1, please be careful for adding new feature
+///
+typedef enum {
+ PchPcieAspmDisabled,
+ PchPcieAspmL0s,
+ PchPcieAspmL1,
+ PchPcieAspmL0sL1,
+ PchPcieAspmAutoConfig,
+ PchPcieAspmMax
+} PCH_PCIE_ASPM_CONTROL;
+
+/**
+ Refer to PCH EDS for the PCH implementation values corresponding
+ to below PCI-E spec defined ranges
+**/
+typedef enum {
+ PchPcieL1SubstatesDisabled,
+ PchPcieL1SubstatesL1_1,
+ PchPcieL1SubstatesL1_1_2,
+ PchPcieL1SubstatesMax
+} PCH_PCIE_L1SUBSTATES_CONTROL;
+
+enum PCH_PCIE_MAX_PAYLOAD {
+ PchPcieMaxPayload128 = 0,
+ PchPcieMaxPayload256,
+ PchPcieMaxPayloadMax
+};
+
+
+/**
+ PCH_PCIE_CLOCK describes PCIe source clock generated by PCH.
+**/
+typedef struct {
+ UINT8 Usage; ///< Purpose of given clock (see PCH_PCIE_CLOCK_USAGE). Default: Unused, 0xFF
+ UINT8 ClkReq; ///< ClkSrc - ClkReq mapping. Default: 1:1 mapping with Clock numbers
+ UINT8 RsvdBytes[2]; ///< Reserved byte
+ UINT32 ClkReqGpioPinMux; /// Muxed GPIO details. Refer GPIO_*_MUXING_SRC_CLKREQ_x*
+} PCH_PCIE_CLOCK;
+
+
+/**
+ The PCH_PCI_EXPRESS_ROOT_PORT_CONFIG describe the feature and capability of each PCH PCIe root port.
+**/
+typedef struct {
+ PCIE_ROOT_PORT_COMMON_CONFIG PcieRpCommonConfig; ///an instance of Pcie Common Config
+ UINT8 ExtSync; ///< Indicate whether the extended synch is enabled. <b>0: Disable</b>; 1: Enable.
+ //
+ // Error handlings
+ //
+ UINT8 SystemErrorEnable; ///< Indicate whether the System Error is enabled. <b>0: Disable</b>; 1: Enable.
+ /**
+ The Multiple VC (MVC) supports hardware to avoid HoQ block for latency sensitive TC.
+ Currently it is only applicable to Root Ports with 2pX4 port configuration with 2 VCs,or
+ DMI port configuration with 3 VCs. For Root Ports 2pX4 configuration, two RPs (RP0,
+ RP2) shall support two PCIe VCs (VC0 & VC1) and the other RPs (RP1, RP3) shall be
+ disabled.
+ <b>0: Disable</b>; 1: Enable
+ **/
+ UINT8 MvcEnabled;
+ /**
+ Virtual Pin Port is industry standard introduced to PCIe Hot Plug support in systems
+ when GPIO pins expansion is needed. It is server specific feature.
+ <b>0x00: Default</b>; 0xFF: Disabled
+ **/
+ UINT8 VppPort;
+ UINT8 VppAddress; ///< PCIe Hot Plug VPP SMBus Address. Default is zero.
+ UINT8 RsvdBytes0[3]; ///< Reserved bytes
+} PCH_PCIE_ROOT_PORT_CONFIG;
+
+/**
+ The PCH_PCIE_CONFIG block describes the expected configuration of the PCH PCI Express controllers
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Moved EnablePort8xhDecode policy to PCIE_COMMON_CONFIG
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ ///
+ /// These members describe the configuration of each PCH PCIe root port.
+ ///
+ PCIE_COMMON_CONFIG PcieCommonConfig;
+ PCH_PCIE_ROOT_PORT_CONFIG RootPort[PCH_MAX_PCIE_ROOT_PORTS];
+ PCH_PCIE_ROOT_PORT_CONFIG DmiPort;
+
+ ///
+ /// <b>(Test)</b> The Index of PCIe Port that is selected for Port8xh Decode (0 Based)
+ ///
+ UINT8 PchPciePort8xhDecodePortIndex;
+ UINT8 DmiPowerReduction;
+ UINT8 RsvdBytes0[2];
+} PCH_PCIE_CONFIG;
+
+/**
+ The PCH_PCIE_RP_PREMEM_CONFIG block describes early configuration of the PCH PCI Express controllers
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ Root Port enabling mask.
+ Bit0 presents RP1, Bit1 presents RP2, and so on.
+ 0: Disable; <b>1: Enable</b>.
+ **/
+ UINT32 RpEnabledMask;
+ /// Configuration of PCIe source clocks
+ ///
+ PCH_PCIE_CLOCK PcieClock[PCH_MAX_PCIE_CLOCKS];
+
+ /**
+ Per Controller Bifurcation Configuration
+ <b>0: Disabled</b>; 1: 4x1; 2: 1x2_2x1; 3: 2x2; 4: 1x4; 5: 4x2; 6: 1x4_2x2; 7: 2x2_1x4; 8: 2x4; 9: 1x8 (see: PCIE_BIFURCATION_CONFIG)
+ **/
+ UINT8 Bifurcation[PCH_MAX_PCIE_CONTROLLERS];
+ UINT8 Rsvd4[(4 - PCH_MAX_PCIE_CONTROLLERS % 4) % 4];
+} PCH_PCIE_RP_PREMEM_CONFIG;
+
+/**
+ The PCIE_RP_DXE_CONFIG block describes the expected configuration of the PCH PCI Express controllers in DXE phase
+
+ <b>Revision 1</b>:
+ - Init version
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+
+ /**
+ PCIe device override table
+ The PCIe device table is being used to override PCIe device ASPM settings.
+ And it's only used in DXE phase.
+ Please refer to PCIE_DEVICE_OVERRIDE structure for the table.
+ Last entry VendorId must be 0.
+ **/
+ PCIE_DEVICE_OVERRIDE *PcieDeviceOverrideTablePtr;
+} PCIE_RP_DXE_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _PCH_PCIERP_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PcieConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PcieConfig.h
new file mode 100644
index 0000000000..07a5644f43
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PcieConfig.h
@@ -0,0 +1,408 @@
+/** @file
+ PCIe Config Block
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _PCIE_CONFIG_H_
+#define _PCIE_CONFIG_H_
+#include <CpuPcieInfo.h>
+
+#define PCIE_LINK_EQ_COEFFICIENTS_MAX 10
+#define PCIE_LINK_EQ_PRESETS_MAX 11
+extern EFI_GUID gPcieConfigGuid;
+
+#pragma pack (push,1)
+
+enum PCIE_COMPLETION_TIMEOUT {
+ PcieCompletionTO_Default,
+ PcieCompletionTO_50_100us,
+ PcieCompletionTO_1_10ms,
+ PcieCompletionTO_16_55ms,
+ PcieCompletionTO_65_210ms,
+ PcieCompletionTO_260_900ms,
+ PcieCompletionTO_1_3P5s,
+ PcieCompletionTO_4_13s,
+ PcieCompletionTO_17_64s,
+ PcieCompletionTO_Disabled
+};
+
+typedef enum {
+ PcieAuto,
+ PcieGen1,
+ PcieGen2,
+ PcieGen3,
+ PcieGen4,
+ PcieGen5
+} PCIE_SPEED;
+
+typedef enum {
+ PcieDisabled,
+ PcieL1SUB_1,
+ PcieL1SUB_1_2
+}L1_SUBSTATES;
+
+/**
+ Represent lane specific PCIe Gen3 equalization parameters.
+**/
+typedef struct {
+ UINT8 Cm; ///< Coefficient C-1
+ UINT8 Cp; ///< Coefficient C+1
+ UINT8 Rsvd0[2]; ///< Reserved bytes
+} PCIE_EQ_PARAM;
+
+typedef struct {
+ UINT16 LtrMaxSnoopLatency; ///< <b>(Test)</b> Latency Tolerance Reporting, Max Snoop Latency.
+ UINT16 LtrMaxNoSnoopLatency; ///< <b>(Test)</b> Latency Tolerance Reporting, Max Non-Snoop Latency.
+ UINT8 SnoopLatencyOverrideMode; ///< <b>(Test)</b> Latency Tolerance Reporting, Snoop Latency Override Mode.
+ UINT8 SnoopLatencyOverrideMultiplier; ///< <b>(Test)</b> Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+ UINT16 SnoopLatencyOverrideValue; ///< <b>(Test)</b> Latency Tolerance Reporting, Snoop Latency Override Value.
+ UINT8 NonSnoopLatencyOverrideMode; ///< <b>(Test)</b> Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+ UINT8 NonSnoopLatencyOverrideMultiplier; ///< <b>(Test)</b> Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+ UINT16 NonSnoopLatencyOverrideValue; ///< <b>(Test)</b> Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+ UINT8 LtrConfigLock; ///< <b>0: Disable</b>; 1: Enable.
+ UINT8 ForceLtrOverride;
+ UINT16 RsvdByte1;
+} PCIE_LTR_CONFIG;
+
+
+/**
+ Specifies the form factor that the slot
+ implements. For custom form factors that
+ do not require any special handling please
+ set PcieFormFactorOther.
+**/
+typedef enum {
+ PcieFormFactorOther = 0,
+ PcieFormFactorCem,
+ PcieFormFactorMiniPci,
+ PcieFormFactorM2,
+ PcieFormFactorOcuLink,
+ PcieFormFactorExpressModule, // Also known as Server IO module(SIOM)
+ PcieFormFactorExpressCard,
+ PcieFormFactorU2 // Also known as SF-8639
+} PCIE_FORM_FACTOR;
+
+typedef enum {
+ PcieLinkHardwareEq = 0, ///< Hardware is responsible for performing coefficient/preset search.
+ PcieLinkFixedEq ///< No coefficient/preset search is performed. Fixed values are used.
+} PCIE_LINK_EQ_METHOD;
+
+typedef enum {
+ PcieLinkEqPresetMode = 0, ///< Use presets during PCIe link equalization
+ PcieLinkEqCoefficientMode ///< Use coefficients during PCIe link equalization
+} PCIE_LINK_EQ_MODE;
+
+typedef struct {
+ UINT32 PreCursor; ///< Pre-cursor coefficient
+ UINT32 PostCursor; ///< Post-cursor coefficient
+} PCIE_LINK_EQ_COEFFICIENTS;
+
+/**
+ PCIe Link EQ Platform Settings
+**/
+typedef struct {
+ UINT8 PcieLinkEqMethod; ///< Tells BIOS which link EQ method should be used for this port. Please refer to PCIE_LINK_EQ_METHOD for details of supported methods. Default: PcieLinkHardwareEq
+ UINT8 PcieLinkEqMode; ///< Tells BIOS which mode should be used for PCIe link EQ. Please refer to PCIE_LINK_EQ_MODE for details of supported modes. Default: depends on SoC
+ /**
+ Specifies if BIOS should perform local transmitter override during phase 2 of EQ process.
+ If enabled value in Ph2LocalTransmitterOverridePreset must be valid.
+ <b>0: Disabled</b>; 1: Enabled
+ **/
+ UINT8 LocalTransmitterOverrideEnable;
+ /**
+ Tells BIOS how many presets/coefficients should be used during link EQ.
+ Entries in the Ph3CoefficientsList or Ph3PresetList(depending on chosen mode) need to be valid up to the number specified in this field.
+ **/
+ UINT8 Ph3NumberOfPresetsOrCoefficients;
+
+ PCIE_LINK_EQ_COEFFICIENTS Ph3CoefficientsList[PCIE_LINK_EQ_COEFFICIENTS_MAX]; ///< List of the PCIe coefficients to be used during equalization process. Only valid if PcieLinkEqMode is PcieLinkEqCoefficientMode
+ UINT32 Ph3PresetList[PCIE_LINK_EQ_PRESETS_MAX]; ///< List of the PCIe preset values to be used during equalization process. Only valid if PcieLinkEqMode is PcieLinkEqPresetMode
+ UINT32 Ph1DownstreamPortTransmitterPreset; ///< Specifies the value of the downstream port transmitter preset to be used during phase 1 of the equalization process. Will be applied to all lanes
+ UINT32 Ph1UpstreamPortTransmitterPreset; ///< Specifies the value of the upstream port transmitter preset to be used during phase 1 of the equalization process. Will be applied to all lanes
+ /**
+ Specifies the preset that should be used during local transmitter override during phase 2 of EQ process.
+ Used only if LocalTransmitterOverrideEnable is TRUE. Will be applied to all PCIe lanes of the root port.
+ Valid up to the PCIE_LINK_EQ_PRESET_MAX value. <b>Default: 0<\b>
+ **/
+ UINT32 Ph2LocalTransmitterOverridePreset;
+ UINT32 PCETTimer; ///< PCET Timer value for single PCIe speed.
+ UINT8 RemotePresetCoeffoverride; ///< Remote Transmitter Preset Coefficient Override for single PCIe speed.
+ /**
+ PCIe Equalization Phase 3 Enable Control
+ - <b>Disabled</b> (0x0) : Disable phase 3 (Default)
+ - Enabled (0x1) : Enable phase 3
+ **/
+ UINT8 EqPh3Bypass;
+ /**
+ PCIe Equalization Phase 2-3 Enable Control
+ - <b>Disabled</b> (0x0) : Disable Phase 2 - Phase 3 (Default)
+ - Enabled (0x1) : Enable Phase 2 - Phase 3
+ **/
+ UINT8 EqPh23Bypass;
+ UINT8 TsLockTimer; ///< 8.0GT/s Training Sequence Wait Latency For Presets / Coefficients Evaluation - Gen3 TS Lock Timer
+} PCIE_LINK_EQ_PLATFORM_SETTINGS;
+
+//Note: This structure will be expanded to hold all common PCIe policies between SA and PCH RootPort
+typedef struct {
+ UINT32 HotPlug : 1; ///< Indicate whether the root port is hot plug available. <b>0: Disable</b>; 1: Enable.
+ UINT32 PmSci : 1; ///< Indicate whether the root port power manager SCI is enabled. 0: Disable; <b>1: Enable</b>.
+ UINT32 TransmitterHalfSwing : 1; ///< Indicate whether the Transmitter Half Swing is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 AcsEnabled : 1; ///< Indicate whether the ACS is enabled. 0: Disable; <b>1: Enable</b>.
+ //
+ // Error handlings
+ //
+ UINT32 AdvancedErrorReporting : 1; ///< Indicate whether the Advanced Error Reporting is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 UnsupportedRequestReport : 1; ///< Indicate whether the Unsupported Request Report is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 FatalErrorReport : 1; ///< Indicate whether the Fatal Error Report is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 NoFatalErrorReport : 1; ///< Indicate whether the No Fatal Error Report is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 CorrectableErrorReport : 1; ///< Indicate whether the Correctable Error Report is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 SystemErrorOnFatalError : 1; ///< Indicate whether the System Error on Fatal Error is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 SystemErrorOnNonFatalError : 1; ///< Indicate whether the System Error on Non Fatal Error is enabled. <b>0: Disable</b>; 1: Enable.
+ UINT32 SystemErrorOnCorrectableError : 1; ///< Indicate whether the System Error on Correctable Error is enabled. <b>0: Disable</b>; 1: Enable.
+ /**
+ Max Payload Size supported, Default <b>128B</b>, see enum CPU_PCIE_MAX_PAYLOAD
+ Changes Max Payload Size Supported field in Device Capabilities of the root port.
+ **/
+ UINT32 MaxPayload : 2;
+ UINT32 DpcEnabled : 1; ///< Downstream Port Containment. 0: Disable; <b>1: Enable</b>
+ UINT32 RpDpcExtensionsEnabled : 1; ///< RP Extensions for Downstream Port Containment. 0: Disable; <b>1: Enable</b>
+ /**
+ Indicates how this root port is connected to endpoint. 0: built-in device; <b>1: slot</b>
+ Built-in is incompatible with hotplug-capable ports.
+ **/
+ UINT32 SlotImplemented : 1;
+ UINT32 PtmEnabled : 1; ///< Enables PTM capability
+ UINT32 SlotPowerLimitScale : 2; ///< <b>(Test)</b> Specifies scale used for slot power limit value. Leave as 0 to set to default. Default is <b>zero</b>.
+ UINT32 SlotPowerLimitValue : 12; //< <b>(Test)</b> Specifies upper limit on power supplies by slot. Leave as 0 to set to default. Default is <b>zero</b>.
+ /**
+ Probe CLKREQ# signal before enabling CLKREQ# based power management.
+ Conforming device shall hold CLKREQ# low until CPM is enabled. This feature attempts
+ to verify CLKREQ# signal is connected by testing pad state before enabling CPM.
+ In particular this helps to avoid issues with open-ended PCIe slots.
+ This is only applicable to non hot-plug ports.
+ <b>0: Disable</b>; 1: Enable.
+ **/
+ UINT32 ClkReqDetect : 1;
+ /**
+ Set if the slot supports manually operated retention latch.
+ **/
+ UINT32 MrlSensorPresent : 1;
+ UINT32 RelaxedOrder : 1;
+ UINT32 NoSnoop : 1;
+ ///
+ /// This member describes whether Peer Memory Writes are enabled on the platform. <b>0: Disable</b>; 1: Enable.
+ ///
+ UINT32 EnablePeerMemoryWrite : 1;
+ ///
+ /// This member describes whether the PCI Express Clock Gating for each root port
+ /// is enabled by platform modules. <b>0: Disable</b>; 1: Enable.
+ ///
+ UINT32 ClockGating : 1;
+ ///
+ /// This member describes whether the PCI Express Power Gating for each root port
+ /// is enabled by platform modules. <b>0: Disable</b>; 1: Enable.
+ ///
+ UINT32 PowerGating : 1;
+ UINT32 RsvdBits0 : 25; ///< Reserved bits.
+ /**
+ PCIe Gen3 Equalization Phase 3 Method (see CPU_PCIE_EQ_METHOD).
+ 0: DEPRECATED, hardware equalization; <b>1: hardware equalization</b>; 4: Fixed Coefficients
+ **/
+ UINT8 Gen3EqPh3Method;
+ UINT8 PhysicalSlotNumber; ///< Indicates the slot number for the root port. Default is the value as root port index.
+ UINT8 CompletionTimeout; ///< The completion timeout configuration of the root port (see: CPU_PCIE_COMPLETION_TIMEOUT). Default is <b>PchPcieCompletionTO_Default</b>.
+ //
+ // Power Management
+ //
+ UINT8 Aspm; ///< The ASPM configuration of the root port (see: CPU_PCIE_ASPM_CONTROL). Default is <b>PchPcieAspmAutoConfig</b>.
+ UINT8 L1Substates; ///< The L1 Substates configuration of the root port (see: CPU_PCIE_L1SUBSTATES_CONTROL). Default is <b>PchPcieL1SubstatesL1_1_2</b>.
+ UINT8 LtrEnable; ///< Latency Tolerance Reporting Mechanism. <b>0: Disable</b>; 1: Enable.
+ UINT8 EnableCpm; ///< Enables Clock Power Management; even if disabled, CLKREQ# signal can still be controlled by L1 PM substates mechanism
+ UINT8 PcieSpeed; ///< Contains speed of PCIe bus (see: PCIE_SPEED)
+ /**
+ <b>(Test)</b>
+ Forces LTR override to be permanent
+ The default way LTR override works is:
+ rootport uses LTR override values provided by BIOS until connected device sends an LTR message, then it will use values from the message
+ This settings allows force override of LTR mechanism. If it's enabled, then:
+ rootport will use LTR override values provided by BIOS forever; LTR messages sent from connected device will be ignored
+ **/
+ PCIE_LTR_CONFIG PcieRpLtrConfig; ///< <b>(Test)</b> Latency Tolerance Reporting Policies including LTR limit and Override
+ /**
+ The number of milliseconds reference code will wait for link to exit Detect state for enabled ports
+ before assuming there is no device and potentially disabling the port.
+ It's assumed that the link will exit detect state before root port initialization (sufficient time
+ elapsed since PLTRST de-assertion) therefore default timeout is zero. However this might be useful
+ if device power-up seqence is controlled by BIOS or a specific device requires more time to detect.
+ In case of non-common clock enabled the default timout is 15ms.
+ <b>Default: 0</b>
+ **/
+ UINT16 DetectTimeoutMs;
+ UINT8 FormFactor; // Please check PCIE_FORM_FACTOR for supported values
+ UINT8 L1Low; ///< L1.LOW enable/disable. <b>0: Disable</b>; 1: Enable.
+ UINT8 LinkDownGpios;
+ ///
+ /// <b>0: Use project default equalization settings</b>; 1: Use equalization settings from PcieLinkEqPlatformSettings
+ ///
+ UINT8 OverrideEqualizationDefaults;
+ UINT8 Reserved[2];
+ PCIE_LINK_EQ_PLATFORM_SETTINGS PcieGen3LinkEqPlatformSettings; ///< Global PCIe Gen3 link EQ settings that BIOS will use during PCIe link EQ for every port.
+ PCIE_LINK_EQ_PLATFORM_SETTINGS PcieGen4LinkEqPlatformSettings; ///< Global PCIe Gen4 link EQ settings that BIOS will use during PCIe link EQ for every port.
+ PCIE_LINK_EQ_PLATFORM_SETTINGS PcieGen5LinkEqPlatformSettings; ///< Global PCIe Gen5 link EQ settings that BIOS will use during PCIe link EQ for every port.
+} PCIE_ROOT_PORT_COMMON_CONFIG;
+
+/**
+ PCIe Common Config
+ @note This structure will be expanded to hold all common PCIe policies between SA and PCH
+**/
+typedef struct {
+ /**
+ RpFunctionSwap allows BIOS to use root port function number swapping when root port of function 0 is disabled.
+ A PCIE device can have higher functions only when Function0 exists. To satisfy this requirement,
+ BIOS will always enable Function0 of a device that contains more than 0 enabled root ports.
+ - <b>Enabled: One of enabled root ports get assigned to Function0.</b>
+ This offers no guarantee that any particular root port will be available at a specific DevNr:FuncNr location
+ - Disabled: Root port that corresponds to Function0 will be kept visible even though it might be not used.
+ That way rootport - to - DevNr:FuncNr assignment is constant. This option will impact ports 1, 9, 17.
+ NOTE: This option will not work if ports 1, 9, 17 are fused or configured for RST PCIe storage or disabled through policy
+ In other words, it only affects ports that would become hidden because they have no device connected.
+ NOTE: Disabling function swap may have adverse impact on power management. This option should ONLY
+ be used when each one of root ports 1, 9, 17:
+ - is configured as PCIe and has correctly configured ClkReq signal, or
+ - does not own any mPhy lanes (they are configured as SATA or USB)
+ **/
+ UINT32 RpFunctionSwap : 1;
+ /**
+ Compliance Test Mode shall be enabled when using Compliance Load Board.
+ <b>0: Disable</b>, 1: Enable
+ **/
+ UINT32 ComplianceTestMode : 1;
+ UINT32 RsvdBits0 : 30; ///< Reserved bits
+ ///
+ /// <b>(Test)</b> This member describes whether PCIE root port Port 8xh Decode is enabled. <b>0: Disable</b>; 1: Enable.
+ ///
+ UINT8 EnablePort8xhDecode;
+ UINT8 RsvdBytes0[3];
+ ///
+ /// List of coefficients used during equalization (applicable to both software and hardware EQ)
+ /// Deprecated Policy
+ ///
+ PCIE_EQ_PARAM HwEqGen3CoeffList[PCIE_HWEQ_COEFFS_MAX];
+} PCIE_COMMON_CONFIG;
+
+typedef struct {
+ PCIE_EQ_PARAM HwEqGen3CoeffList[CPU_PCIE_MAX_ROOT_PORTS][PCIE_HWEQ_COEFFS_MAX];
+ PCIE_EQ_PARAM HwEqGen4CoeffList[CPU_PCIE_MAX_ROOT_PORTS][PCIE_HWEQ_COEFFS_MAX];
+ PCIE_EQ_PARAM HwEqGen5CoeffList[CPU_PCIE_MAX_ROOT_PORTS][PCIE_HWEQ_COEFFS_MAX];
+} PCIE_COMMON_CONFIG2;
+
+
+/**
+ PCIe device table entry entry
+
+ The PCIe device table is being used to override PCIe device ASPM settings.
+ To take effect table consisting of such entries must be instelled as PPI
+ on gPchPcieDeviceTablePpiGuid.
+ Last entry VendorId must be 0.
+**/
+typedef struct {
+ UINT16 VendorId; ///< The vendor Id of Pci Express card ASPM setting override, 0xFFFF means any Vendor ID
+ UINT16 DeviceId; ///< The Device Id of Pci Express card ASPM setting override, 0xFFFF means any Device ID
+ UINT8 RevId; ///< The Rev Id of Pci Express card ASPM setting override, 0xFF means all steppings
+ UINT8 BaseClassCode; ///< The Base Class Code of Pci Express card ASPM setting override, 0xFF means all base class
+ UINT8 SubClassCode; ///< The Sub Class Code of Pci Express card ASPM setting override, 0xFF means all sub class
+ UINT8 EndPointAspm; ///< Override device ASPM (see: PCH_PCIE_ASPM_CONTROL)
+ ///< Bit 1 must be set in OverrideConfig for this field to take effect
+ UINT16 OverrideConfig; ///< The override config bitmap (see: PCH_PCIE_OVERRIDE_CONFIG).
+ /**
+ The L1Substates Capability Offset Override. (applicable if bit 2 is set in OverrideConfig)
+ This field can be zero if only the L1 Substate value is going to be override.
+ **/
+ UINT16 L1SubstatesCapOffset;
+ /**
+ L1 Substate Capability Mask. (applicable if bit 2 is set in OverrideConfig)
+ Set to zero then the L1 Substate Capability [3:0] is ignored, and only L1s values are override.
+ Only bit [3:0] are applicable. Other bits are ignored.
+ **/
+ UINT8 L1SubstatesCapMask;
+ /**
+ L1 Substate Port Common Mode Restore Time Override. (applicable if bit 2 is set in OverrideConfig)
+ L1sCommonModeRestoreTime and L1sTpowerOnScale can have a valid value of 0, but not the L1sTpowerOnValue.
+ If L1sTpowerOnValue is zero, all L1sCommonModeRestoreTime, L1sTpowerOnScale, and L1sTpowerOnValue are ignored,
+ and only L1SubstatesCapOffset is override.
+ **/
+ UINT8 L1sCommonModeRestoreTime;
+ /**
+ L1 Substate Port Tpower_on Scale Override. (applicable if bit 2 is set in OverrideConfig)
+ L1sCommonModeRestoreTime and L1sTpowerOnScale can have a valid value of 0, but not the L1sTpowerOnValue.
+ If L1sTpowerOnValue is zero, all L1sCommonModeRestoreTime, L1sTpowerOnScale, and L1sTpowerOnValue are ignored,
+ and only L1SubstatesCapOffset is override.
+ **/
+ UINT8 L1sTpowerOnScale;
+ /**
+ L1 Substate Port Tpower_on Value Override. (applicable if bit 2 is set in OverrideConfig)
+ L1sCommonModeRestoreTime and L1sTpowerOnScale can have a valid value of 0, but not the L1sTpowerOnValue.
+ If L1sTpowerOnValue is zero, all L1sCommonModeRestoreTime, L1sTpowerOnScale, and L1sTpowerOnValue are ignored,
+ and only L1SubstatesCapOffset is override.
+ **/
+ UINT8 L1sTpowerOnValue;
+
+ /**
+ SnoopLatency bit definition
+ Note: All Reserved bits must be set to 0
+
+ BIT[15] - When set to 1b, indicates that the values in bits 9:0 are valid
+ When clear values in bits 9:0 will be ignored
+ BITS[14:13] - Reserved
+ BITS[12:10] - Value in bits 9:0 will be multiplied with the scale in these bits
+ 000b - 1 ns
+ 001b - 32 ns
+ 010b - 1024 ns
+ 011b - 32,768 ns
+ 100b - 1,048,576 ns
+ 101b - 33,554,432 ns
+ 110b - Reserved
+ 111b - Reserved
+ BITS[9:0] - Snoop Latency Value. The value in these bits will be multiplied with
+ the scale in bits 12:10
+
+ This field takes effect only if bit 3 is set in OverrideConfig.
+ **/
+ UINT16 SnoopLatency;
+ /**
+ NonSnoopLatency bit definition
+ Note: All Reserved bits must be set to 0
+
+ BIT[15] - When set to 1b, indicates that the values in bits 9:0 are valid
+ When clear values in bits 9:0 will be ignored
+ BITS[14:13] - Reserved
+ BITS[12:10] - Value in bits 9:0 will be multiplied with the scale in these bits
+ 000b - 1 ns
+ 001b - 32 ns
+ 010b - 1024 ns
+ 011b - 32,768 ns
+ 100b - 1,048,576 ns
+ 101b - 33,554,432 ns
+ 110b - Reserved
+ 111b - Reserved
+ BITS[9:0] - Non Snoop Latency Value. The value in these bits will be multiplied with
+ the scale in bits 12:10
+
+ This field takes effect only if bit 3 is set in OverrideConfig.
+ **/
+ UINT16 NonSnoopLatency;
+
+ /**
+ Forces LTR override to be permanent
+ The default way LTR override works is:
+ rootport uses LTR override values provided by BIOS until connected device sends an LTR message, then it will use values from the message
+ This settings allows force override of LTR mechanism. If it's enabled, then:
+ rootport will use LTR override values provided by BIOS forever; LTR messages sent from connected device will be ignored
+ **/
+ UINT8 ForceLtrOverride;
+ UINT8 Reserved[3];
+} PCIE_DEVICE_OVERRIDE;
+
+#pragma pack (pop)
+#endif // _PCIE_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PciePreMemConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PciePreMemConfig.h
new file mode 100644
index 0000000000..fe0be3ec12
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/PcieRp/PciePreMemConfig.h
@@ -0,0 +1,36 @@
+/** @file
+ PCIe Config Block PreMem
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _PCIE_PREMEM_CONFIG_H_
+#define _PCIE_PREMEM_CONFIG_H_
+
+
+extern EFI_GUID gPciePreMemConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ PCIe IMR Config
+**/
+typedef struct {
+ UINT8 ImrEnabled; ///< PCIe IMR. <b>0: Disable</b>; 1: Enable.
+ UINT8 ImrRpLocation; ///< 0: PCH_PCIe; 1: CPU_PCIe. If PCIeImrEnabled is TRUE then this will use to select the Root port location from PCH PCIe or CPU PCIe.Refer PCIE_IMR_ROOT_PORT_LOCATION above
+ UINT16 ImrSize; ///< PCIe IMR size in megabytes
+ UINT8 ImrRpSelection; ///< Index of root port that is selected for PCIe IMR (0 based)
+ UINT8 Rsvd0[3];
+} PCIE_IMR_CONFIG;
+
+/**
+ PCIe Pre-Memory Configuration
+ <b>Revision 1</b>: - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0 - 27 Config Block Header
+ PCIE_IMR_CONFIG PcieImr; ///< IMR Configuration
+} PCIE_PREMEM_CONFIG;
+
+#pragma pack (pop)
+#endif // _PCIE_PREMEM_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/AdrConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/AdrConfig.h
new file mode 100644
index 0000000000..35ecb53ed2
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/AdrConfig.h
@@ -0,0 +1,76 @@
+/** @file
+ ADR policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+
+#ifndef _ADR_CONFIG_H_
+#define _ADR_CONFIG_H_
+
+#include <ConfigBlock.h>
+
+extern EFI_GUID gAdrConfigGuid;
+
+#pragma pack (push,1)
+
+
+/**
+ ADR Source Enable
+**/
+typedef union {
+ struct {
+ UINT32 Reserved1 : 1;
+ UINT32 AdrSrcPbo : 1;
+ UINT32 AdrSrcPmcUncErr : 1;
+ UINT32 AdrSrcPchThrm : 1;
+ UINT32 AdrSrcMePbo : 1;
+ UINT32 AdrSrcCpuThrm : 1;
+ UINT32 AdrSrcMegbl : 1;
+ UINT32 AdrSrcLtReset : 1;
+ UINT32 AdrSrcPmcWdt : 1;
+ UINT32 AdrSrcMeWdt : 1;
+ UINT32 AdrSrcPmcFw : 1;
+ UINT32 AdrSrcPchpwrFlr : 1;
+ UINT32 AdrSrcSyspwrFlr : 1;
+ UINT32 Reserved2 : 1;
+ UINT32 AdrSrcMiaUxsErr : 1;
+ UINT32 AdrSrcMiaUxErr : 1;
+ UINT32 AdrSrcCpuThrmWdt : 1;
+ UINT32 AdrSrcMeUncErr : 1;
+ UINT32 AdrSrcAdrGpio : 1;
+ UINT32 AdrSrcOcwdtNoicc : 1;
+ UINT32 AdrSrcOcwdtIcc : 1;
+ UINT32 AdrSrcCseHecUncErr : 1;
+ UINT32 AdrSrcPmcSramUncErr : 1;
+ UINT32 AdrSrcPmcIromParity : 1;
+ UINT32 AdrSrcPmcRfFusaErr : 1;
+ UINT32 Reserved3 : 4;
+ UINT32 AdrSrcPpbrParityErr : 1;
+ UINT32 Reserved4 : 2;
+ } Field;
+ UINT32 Value;
+} ADR_SOURCE_ENABLE;
+
+/**
+ ADR Configuration
+ <b>Revision 1</b>: - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ UINT32 AdrEn : 2; ///< Determine if Adr is enabled - 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE
+ UINT32 AdrTimerEn : 2; ///< Determine if Adr timer options are enabled - 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE
+ UINT32 AdrTimer1Val : 8; ///< Determines the Timeout value used for the ADR timer 1. A value of zero bypasses the timer
+ UINT32 AdrMultiplier1Val : 3; ///< Specifies the tick frequency upon which the timer 1 will increment. ADR_TIMER_SCALE should be used to encode values
+ UINT32 AdrTimer2Val : 8; ///< Determines the Timeout value used for the ADR timer 2. A value of zero bypasses the timer
+ UINT32 AdrMultiplier2Val : 3; ///< Specifies the tick frequency upon which the timer 2 will increment. ADR_TIMER_SCALE should be used to encode values
+ UINT32 AdrHostPartitionReset : 2; ///< Determine if Host Partition Reset is enabled - 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE
+ UINT32 AdrSrcOverride : 1; ///< Check if default ADR sources will be overriten with custom 0: Not overwritten, 1: Overwritten
+ UINT32 AdrPlatAckEn : 2; ///< Determine if Platform Acknowledge is enabled - 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE
+ UINT32 ReservedBits : 1;
+ ADR_SOURCE_ENABLE AdrSrcSel; ///< Determine which ADR sources are enabled - 0: Enabled, 1: Disabled
+} ADR_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _ADR_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/PmConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/PmConfig.h
new file mode 100644
index 0000000000..0a2ae50e6a
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Pmc/PmConfig.h
@@ -0,0 +1,86 @@
+/** @file
+ Power Management policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _PM_CONFIG_H_
+#define _PM_CONFIG_H_
+
+#include <ConfigBlock.h>
+
+extern EFI_GUID gPmConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ Description of Global Reset Trigger/Event Mask register
+**/
+typedef union {
+ struct {
+ UINT32 Reserved1 : 1;
+ UINT32 Pbo : 1;
+ UINT32 PmcUncErr : 1;
+ UINT32 PchThrm : 1;
+ UINT32 MePbo : 1;
+ UINT32 CpuThrm : 1;
+ UINT32 Megbl : 1;
+ UINT32 LtReset : 1;
+ UINT32 PmcWdt : 1;
+ UINT32 MeWdt : 1;
+ UINT32 PmcFw : 1;
+ UINT32 PchpwrFlr : 1;
+ UINT32 SyspwrFlr : 1;
+ UINT32 Reserved2 : 1;
+ UINT32 MiaUxsErr : 1;
+ UINT32 MiaUxErr : 1;
+ UINT32 CpuThrmWdt : 1;
+ UINT32 MeUncErr : 1;
+ UINT32 AdrGpio : 1;
+ UINT32 OcwdtNoicc : 1;
+ UINT32 OcwdtIcc : 1;
+ UINT32 CseHecUncErr : 1;
+ UINT32 PmcSramUncErr : 1;
+ UINT32 PmcIromParity : 1;
+ UINT32 PmcRfFusaErr : 1;
+ UINT32 Reserved3 : 4;
+ UINT32 PpbrParityErr : 1;
+ UINT32 Reserved4 : 2;
+ } Field;
+ UINT32 Value;
+} PMC_GLOBAL_RESET_MASK;
+
+typedef union {
+ struct {
+ UINT32 HostResetTimeout : 1;
+ UINT32 SxEntryTimeout : 1;
+ UINT32 HostRstProm : 1;
+ UINT32 HsmbMsg : 1;
+ UINT32 Pmc3Strike : 1;
+ UINT32 FwGblrstScratch5 : 1;
+ UINT32 PmcDmaTimeout : 1;
+ UINT32 EspiType7 : 1;
+ UINT32 EspiType8 : 1;
+ UINT32 FwGblRstScratch10 : 1;
+ UINT32 FwGblRstScratch11 : 1;
+ UINT32 LpmFwErr : 1;
+ UINT32 BscanMode : 1;
+ UINT32 SlpLvlRspErr : 1;
+ UINT32 FwGblrstScratch15 : 1;
+ UINT32 FwGblrstScratch16 : 1;
+ UINT32 FwGblrstScratch17 : 1;
+ UINT32 FwGblrstScratch18 : 1;
+ UINT32 FwGblrstScratch19 : 1;
+ UINT32 FwGblrstScratch20 : 1;
+ UINT32 FwGblrstScratch21 : 1;
+ UINT32 FwGblrstScratch22 : 1;
+ UINT32 FwGblrstScratch23 : 1;
+ UINT32 Rsvd : 9;
+ } Field;
+ UINT32 Value;
+} PMC_GLOBAL_RESET_MASK1;
+
+
+#pragma pack (pop)
+
+#endif // _PM_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Rtc/RtcConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Rtc/RtcConfig.h
new file mode 100644
index 0000000000..62f8303558
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Rtc/RtcConfig.h
@@ -0,0 +1,37 @@
+/** @file
+ RTC policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _RTC_CONFIG_H_
+#define _RTC_CONFIG_H_
+
+extern EFI_GUID gRtcConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ The RTC_CONFIG block describes the expected configuration of RTC configuration.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ When set, prevents RTC TS (BUC.TS) from being changed.
+ This BILD bit has different function compared to LPC/eSPI, SPI.
+ 0: Disabled; <b>1: Enabled</b>
+ **/
+ UINT32 BiosInterfaceLock : 1;
+ /**
+ When set, bytes 38h-3Fh in the upper 128bytes bank of RTC RAM are locked
+ and cannot be accessed.
+ Writes will be droipped and reads will not return any guaranteed data.
+ 0: Disabled; <b>1: Enabled</b>
+ **/
+ UINT32 MemoryLock : 1;
+ UINT32 RsvdBits0 : 30;
+} RTC_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _RTC_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SerialIo/SerialIoConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SerialIo/SerialIoConfig.h
new file mode 100644
index 0000000000..b5c3b21606
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SerialIo/SerialIoConfig.h
@@ -0,0 +1,33 @@
+/** @file
+ Serial IO policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _SERIAL_IO_CONFIG_H_
+#define _SERIAL_IO_CONFIG_H_
+
+extern EFI_GUID gSerialIoConfigGuid;
+
+#include <SerialIoDevices.h>
+
+#pragma pack (push,1)
+
+/**
+ The SERIAL_IO_CONFIG block provides the configurations to set the Serial IO controllers
+
+ <b>Revision 1:</b>
+ - Inital version.
+ <b>Revision 2:</b>
+ - Modified SPI Config to support pinmux functionality.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ SERIAL_IO_SPI_CONFIG SpiDeviceConfig[PCH_MAX_SERIALIO_SPI_CONTROLLERS]; ///< SPI Configuration
+ SERIAL_IO_I2C_CONFIG I2cDeviceConfig[PCH_MAX_SERIALIO_I2C_CONTROLLERS]; ///< I2C Configuration
+ SERIAL_IO_UART_CONFIG UartDeviceConfig[PCH_MAX_SERIALIO_UART_CONTROLLERS]; ///< UART Configuration
+} SERIAL_IO_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _SERIAL_IO_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiConfig.h
new file mode 100644
index 0000000000..5b59f08df2
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiConfig.h
@@ -0,0 +1,105 @@
+/** @file
+ Si Config Block
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _SI_CONFIG_H_
+#define _SI_CONFIG_H_
+
+#define SI_CONFIG_REVISION 1
+
+extern EFI_GUID gSiConfigGuid;
+
+
+#pragma pack (push,1)
+
+/**
+ The Silicon Policy allows the platform code to publish a set of configuration
+ information that the RC drivers will use to configure the silicon hardware.
+
+ <b>Revision 1</b>: - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0 - 27 Config Block Header
+ //
+ // Platform specific common policies that used by several silicon components.
+ //
+ UINT8 CsmFlag; ///< offset 28 CSM status flag.@deprecated.
+ /**
+ This is used to skip the SSID programming in silicon code.
+ When set to TRUE, silicon code will not do any SSID programming and platform code
+ needs to handle that by itself properly.
+ <b>0: FALSE</b>, 1: TRUE
+ **/
+ UINT8 SkipSsidProgramming; ///< offset 29
+ UINT8 RsvdBytes0[2]; ///< offset 30 - 31
+ /**
+ When SkipSsidProgramming is FALSE, silicon code will use this as default value
+ to program the SVID for all internal devices.
+ <b>0: use silicon default SVID 0x8086 </b>, Non-zero: use customized SVID.
+ **/
+ UINT16 CustomizedSvid; ///< offset 32 - 33
+ /**
+ When SkipSsidProgramming is FALSE, silicon code will use this as default value
+ to program the Sid for all internal devices.
+ <b>0: use silicon default SSID 0x7270 </b>, Non-zero: use customized SSID.
+ **/
+ UINT16 CustomizedSsid; ///< offset 34 - 35
+ UINT32 *SsidTablePtr; ///< offset 36 - 39
+ /**
+ Number of valid enties in SsidTablePtr.
+ This is valid when SkipSsidProgramming is FALSE;
+ <b>Default is 0.</b>
+ **/
+ UINT16 NumberOfSsidTableEntry; ///< offset 40 - 41
+ UINT8 RsvdBytes1[2]; ///< offset 42 - 43
+ /**
+ This is used to skip setting BIOS_DONE MSR during firmware update boot mode.
+ When set to TRUE and boot mode is BOOT_ON_FLASH_UPDATE,
+ skip setting BIOS_DONE MSR at EndofPei.
+ <b>0: FALSE</b>, 1: TRUE
+ **/
+ UINT8 SkipBiosDoneWhenFwUpdate; ///< Offset 44
+ UINT8 RsvdBytes2[3]; ///< Offset 45 - 47
+} SI_CONFIG;
+
+#pragma pack (pop)
+
+
+///
+/// Subsystem Vendor ID / Subsystem ID
+///
+typedef struct {
+ UINT16 SubSystemVendorId;
+ UINT16 SubSystemId;
+} SVID_SID_VALUE;
+
+//
+// Below is to match PCI_SEGMENT_LIB_ADDRESS () which can directly send to PciSegmentRead/Write functions.
+//
+typedef struct {
+ union {
+ struct {
+ UINT32 Register:12;
+ UINT32 Function:3;
+ UINT32 Device:5;
+ UINT32 Bus:8;
+ UINT32 Reserved1:4;
+ UINT32 Segment:16;
+ UINT32 Reserved2:16;
+ } Bits;
+ UINT64 SegBusDevFuncRegister;
+ } Address;
+ SVID_SID_VALUE SvidSidValue;
+ UINT32 Reserved;
+} SVID_SID_INIT_ENTRY;
+
+
+typedef struct {
+ UINT32 SkipBus;
+ UINT32 SkipDevice;
+ UINT32 SkipFunction;
+} SVID_SID_SKIP_TABLE;
+
+#endif // _SI_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiPreMemConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiPreMemConfig.h
new file mode 100644
index 0000000000..584a0d4169
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/SiPreMemConfig.h
@@ -0,0 +1,63 @@
+/** @file
+ Si Config Block PreMem
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _SI_PREMEM_CONFIG_H_
+#define _SI_PREMEM_CONFIG_H_
+
+#define SI_PREMEM_CONFIG_REVISION 1
+
+extern EFI_GUID gSiPreMemConfigGuid;
+
+typedef enum {
+ ProbeTypeDisabled = 0x00,
+ ProbeTypeDciOob = 0x02,
+ ProbeType2WireDciOob = 0x06,
+ ProbeTypeManual = 0x07,
+ ProbeTypeMax
+} PLATFORM_DEBUG_CONSENT_PROBE_TYPE;
+
+#pragma pack (push,1)
+/**
+ The Silicon PreMem Policy allows the platform code to publish a set of configuration
+ information that the RC drivers will use to configure the silicon hardware.
+
+ <b>Revision 1</b>:
+ - Initial version.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0 - 27 Config Block Header
+ /**
+ Platform Debug Consent
+ As a main switch to enable platform debug capability and relevant settings with specified probe type.
+ Manual: Do not use Platform Debug Consent to override other debug-relevant policies, but the user must set each debug option manually, aimed at advanced users.
+
+ PDC-dependent policies are listed:
+ DciPreMemConfig->DciEn
+ CpuTraceHubConfig->EnableMode
+ CpuTraceHubConfig->CpuTraceHubMemReg0Size
+ CpuTraceHubConfig->CpuTraceHubMemReg1Size
+ PchTraceHubPreMemConfig->EnableMode
+ PchTraceHubPreMemConfig->MemReg0Size
+ PchTraceHubPreMemConfig->MemReg1Size
+
+ Note: DCI OOB (aka BSSB) uses CCA probe.
+ Refer to definition of PLATFORM_DEBUG_CONSENT_PROBE_TYPE
+ <b>0:Disabled</b>; 2:DCI OOB (All + TraceHubs); 6:2-wire DCI OOB (Low power); 7:Manual
+ **/
+ UINT32 PlatformDebugConsent : 4; /// offset 28 - 31
+ UINT32 RsvdBits : 28;
+ /**
+ This is used to skip override boot mode during firmware update boot mode.
+ When set to TRUE and boot mode is BOOT_ON_FLASH_UPDATE,
+ skip setting boot mode to BOOT_WITH_FULL_CONFIGURATION in PEI memory init.
+ <b>0: FALSE</b>, 1: TRUE
+ **/
+ UINT8 SkipOverrideBootModeWhenFwUpdate; /// offset 32
+ UINT8 RsvdBytes[3]; /// offset 33 - 35
+} SI_PREMEM_CONFIG;
+
+#pragma pack (pop)
+#endif // _SI_PREMEM_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Smbus/SmbusConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Smbus/SmbusConfig.h
new file mode 100644
index 0000000000..2fc724552b
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Smbus/SmbusConfig.h
@@ -0,0 +1,49 @@
+/** @file
+ Smbus policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _SMBUS_CONFIG_H_
+#define _SMBUS_CONFIG_H_
+
+extern EFI_GUID gSmbusPreMemConfigGuid;
+
+#pragma pack (push,1)
+
+#define PCH_MAX_SMBUS_RESERVED_ADDRESS 128
+
+///
+/// The SMBUS_CONFIG block lists the reserved addresses for non-ARP capable devices in the platform.
+///
+typedef struct {
+ /**
+ Revision 1: Init version
+ **/
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ /**
+ This member describes whether or not the SMBus controller of PCH should be enabled.
+ 0: Disable; <b>1: Enable</b>.
+ **/
+ UINT32 Enable : 1;
+ UINT32 ArpEnable : 1; ///< Enable SMBus ARP support, <b>0: Disable</b>; 1: Enable.
+ UINT32 DynamicPowerGating : 1; ///< <b>(Test)</b> <b>Disable</b> or Enable Smbus dynamic power gating.
+ ///
+ /// <b>(Test)</b> SPD Write Disable, 0: leave SPD Write Disable bit; <b>1: set SPD Write Disable bit.</b>
+ /// For security recommendations, SPD write disable bit must be set.
+ ///
+ UINT32 SpdWriteDisable : 1;
+ UINT32 SmbAlertEnable : 1; ///< Enable SMBus Alert pin (SMBALERT#). 0: <b>Disabled<b>, 1: Enabled.
+ UINT32 RsvdBits0 : 27; ///< Reserved bits
+ UINT16 SmbusIoBase; ///< SMBUS Base Address (IO space). Default is <b>0xEFA0</b>.
+ UINT8 Rsvd0; ///< Reserved bytes
+ UINT8 NumRsvdSmbusAddresses; ///< The number of elements in the RsvdSmbusAddressTable.
+ /**
+ Array of addresses reserved for non-ARP-capable SMBus devices.
+ **/
+ UINT8 RsvdSmbusAddressTable[PCH_MAX_SMBUS_RESERVED_ADDRESS];
+} PCH_SMBUS_PREMEM_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _SMBUS_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Spi/FlashProtectionConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Spi/FlashProtectionConfig.h
new file mode 100644
index 0000000000..45dc538064
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Spi/FlashProtectionConfig.h
@@ -0,0 +1,54 @@
+/** @file
+ FlashProtection policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _FLASH_PROTECTION_CONFIG_H_
+#define _FLASH_PROTECTION_CONFIG_H_
+
+extern EFI_GUID gFlashProtectionConfigGuid;
+
+#pragma pack (push,1)
+
+//
+// Flash Protection Range Register
+//
+#define PCH_FLASH_PROTECTED_RANGES 5
+
+/**
+ Protected Flash Range
+**/
+typedef struct {
+ UINT32 WriteProtectionEnable : 1; ///< Write or erase is blocked by hardware. <b>0: Disable</b>; 1: Enable.
+ UINT32 ReadProtectionEnable : 1; ///< Read is blocked by hardware. <b>0: Disable</b>; 1: Enable.
+ UINT32 RsvdBits : 30; ///< Reserved
+ /**
+ The address of the upper limit of protection
+ This is a left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for limit comparison
+ **/
+ UINT16 ProtectedRangeLimit;
+ /**
+ The address of the upper limit of protection
+ This is a left shifted address by 12 bits with address bits 11:0 are assumed to be 0
+ **/
+ UINT16 ProtectedRangeBase;
+} PROTECTED_RANGE;
+
+/**
+ The PCH provides a method for blocking writes and reads to specific ranges
+ in the SPI flash when the Protected Ranges are enabled.
+ PROTECTED_RANGE is used to specify if flash protection are enabled,
+ the write protection enable bit and the read protection enable bit,
+ and to specify the upper limit and lower base for each register
+ Platform code is responsible to get the range base by PchGetSpiRegionAddresses routine,
+ and set the limit and base accordingly.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ PROTECTED_RANGE ProtectRange[PCH_FLASH_PROTECTED_RANGES]; ///< Protected Flash Ranges
+} PCH_FLASH_PROTECTION_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _FLASH_PROTECTION_CONFIG_H_
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Tcss/TcssPeiConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Tcss/TcssPeiConfig.h
new file mode 100644
index 0000000000..95bcaaa951
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Tcss/TcssPeiConfig.h
@@ -0,0 +1,71 @@
+/** @file
+ TCSS PEI policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _TCSS_PEI_CONFIG_H_
+#define _TCSS_PEI_CONFIG_H_
+
+#include <ConfigBlock.h>
+
+extern EFI_GUID gTcssPeiConfigGuid;
+
+#pragma pack (push,1)
+
+
+#define MAX_IOM_AUX_BIAS_COUNT 4
+
+///
+/// The IOM_AUX_ORI_PAD_CONFIG describes IOM TypeC port map GPIO pin.
+/// Those GPIO setting for DP Aux Orientation Bias Control when the TypeC port didn't have re-timer.
+/// IOM needs know Pull-Up and Pull-Down pin for Bias control
+///
+typedef struct {
+ UINT32 GpioPullN; ///< GPIO Pull Up Ping number that is for IOM indecate the pull up pin from TypeC port.
+ UINT32 GpioPullP; ///< GPIO Pull Down Ping number that is for IOM indecate the pull down pin from TypeC port.
+} IOM_AUX_ORI_PAD_CONFIG;
+
+///
+/// The IOM_EC_INTERFACE_CONFIG block describes interaction between BIOS and IOM-EC.
+///
+
+typedef struct {
+ UINT32 VccSt; ///< IOM VCCST request. (Not equal to actual VCCST value)
+ UINT32 UsbOverride; ///< IOM to override USB connection.
+ UINT32 D3ColdEnable; ///< Enable/disable D3 Cold support in TCSS
+ UINT32 D3HotEnable; ///< Enable/disable D3 Hot support in TCSS
+} IOM_INTERFACE_CONFIG;
+
+///
+/// The PMC_INTERFACE_CONFIG block describes interaction between BIOS and PMC
+///
+typedef struct {
+ UINT8 PmcPdEnable; ///< PMC PD Solution Enable
+ UINT8 Rsvd[3];
+} PMC_INTERFACE_CONFIG;
+
+///
+/// The TCSS_IOM_PEI_CONFIG block describes IOM Aux/HSL override settings for TCSS.
+///
+typedef struct {
+ UINT16 AuxOri; ///< Bits defining value for IOM Aux Orientation Register
+ UINT16 HslOri; ///< Bits defining value for IOM HSL Orientation Register
+} TCSS_IOM_ORI_OVERRIDE;
+
+///
+/// The TCSS_IOM_PEI_CONFIG block describes IOM settings for TCSS.
+///
+typedef struct {
+ IOM_AUX_ORI_PAD_CONFIG IomAuxPortPad[MAX_IOM_AUX_BIAS_COUNT]; ///< The IOM_AUX_ORI_BIAS_CTRL port config setting.
+ TCSS_IOM_ORI_OVERRIDE IomOverrides;
+ IOM_INTERFACE_CONFIG IomInterface; ///< Config settings are BIOS <-> IOM interface.
+ PMC_INTERFACE_CONFIG PmcInterface; ///< Config settings for BIOS <-> PMC interface
+ UINT8 TcStateLimit; ///< Tcss C-State deep stage
+ UINT8 Reserved[3]; ///< Reserved bytes for future use
+} TCSS_IOM_PEI_CONFIG;
+
+
+#pragma pack (pop)
+
+#endif /* _TCSS_PEI_CONFIG_H_ */
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Vmd/VmdPeiConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Vmd/VmdPeiConfig.h
new file mode 100644
index 0000000000..37e6439abb
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Vmd/VmdPeiConfig.h
@@ -0,0 +1,60 @@
+/** @file
+ VMD PEI policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _VMD_PEI_CONFIG_H_
+#define _VMD_PEI_CONFIG_H_
+
+#include <ConfigBlock.h>
+
+#pragma pack (push,1)
+
+#define VMD_MAX_DEVICES 31
+
+typedef struct {
+ UINT8 RpBus;
+ UINT8 RpDevice;
+ UINT8 RpFunction;
+ UINT8 RpEnable;
+} RP_BDF_DATA;
+
+/**
+ This configuration block is to configure VMD related variables used in PostMem PEI.
+ If VMD Device is not supported, all policies can be ignored.
+ <b>Revision 1</b>:
+ - Initial version.
+ <b>Revision 2</b>:
+ - Deprecated VmdPortAEnable, VmdPortBEnable, VmdPortCEnable, VmdPortDEnable.
+ - Added VmdPortEnable[VMD_MAX_DEVICES] and structure to hold Vmd EFI Variable details.
+ (Added B/D/F fields along with Port Enable for up to max 31 devices).
+ <b>Revision 3</b>:
+ Added policy to get the Bar values from platform PCD.
+ <b>Revision 4</b>: Added VmdGlobalMapping to map all the storage devices under VMD
+**/
+
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
+ UINT8 VmdEnable; ///< Offset 28 This field used to enable VMD controller 1=Enable <b>0=Disable(default)</b>
+ UINT8 VmdPortAEnable; /// Deprecated < Offset 29 This field used to enable VMD portA Support 1=Enable and 0=Disable (default)
+ UINT8 VmdPortBEnable; /// Deprecated < Offset 30 This field used to enable VMD portB Support 1=Enable and 0=Disable (default)
+ UINT8 VmdPortCEnable; /// Deprecated < Offset 31 This field used to enable VMD portC Support 1=Enable and 0=Disable (default)
+ UINT8 VmdPortDEnable; /// Deprecated < Offset 32 This field used to enable VMD portD Support 1=Enable and 0=Disable (default)
+ UINT8 VmdCfgBarSize; ///< Offset 33 This is used to set the VMD Config Bar Size. <b>25(32MB)</b>
+ UINT8 VmdCfgBarAttr; ///< Offset 34 This is used to set VMD Config Bar Attributes 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_PREFETCH, <b>2: VMD_64BIT_NONPREFETCH(Default)</b>
+ UINT8 VmdMemBarSize1; ///< Offset 35 This is used to set the VMD Mem Bar1 size. <b>25 (32MB)</b>.
+ UINT8 VmdMemBar1Attr; ///< Offset 36 This is used to set VMD Mem Bar1 Attributes <b>0: VMD_32BIT_NONPREFETCH(Default) </b> 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+ UINT8 VmdMemBarSize2; ///< Offset 37 This is used to set the VMD Mem Bar2 size. <b>20(1MB)</b>.
+ UINT8 VmdMemBar2Attr; ///< Offset 38 This is used to set VMD Mem Bar2 Attributes 0: VMD_32BIT_NONPREFETCH <b>1: VMD_64BIT_NONPREFETCH(Default)</b>, 2: VMD_64BIT_PREFETCH
+ UINT8 VmdGlobalMapping; ///< Offset 39 This field used to enable Global Mapping 1=Enable <b>0=Disable(default)</b>
+ RP_BDF_DATA VmdPortEnable[VMD_MAX_DEVICES]; ///< Offset 40 to 163 This field used to to store b/d/f for each root port along with enable Support 1=Enable <b>0=Disable (default)</b>
+ VOID *VmdVariablePtr; /// This config block will be updated as per the EFI variable.
+ UINT32 VmdCfgBarBase; /// Temp Address VMD CFG BAR Default is <b>0xA0000000</b>
+ UINT32 VmdMemBar1Base; /// Temp Address VMD CFG BAR Default is <b>0xA2000000</b>
+ UINT32 VmdMemBar2Base; /// Temp Address VMD CFG BAR Default is <b>0xA4000000</b>
+} VMD_PEI_CONFIG;
+
+#pragma pack (pop)
+
+#endif /* _VMD_PEI_PREMEM_CONFIG_H_ */
diff --git a/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Wdt/WatchDogConfig.h b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Wdt/WatchDogConfig.h
new file mode 100644
index 0000000000..ad17488ecc
--- /dev/null
+++ b/Silicon/Intel/AlderlakeSiliconPkg/Include/ConfigBlock/Wdt/WatchDogConfig.h
@@ -0,0 +1,30 @@
+/** @file
+ WatchDog policy
+
+ Copyright (c) 2022, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+**/
+#ifndef _WATCH_DOG_CONFIG_H_
+#define _WATCH_DOG_CONFIG_H_
+
+extern EFI_GUID gWatchDogPreMemConfigGuid;
+
+#pragma pack (push,1)
+
+/**
+ This policy clears status bits and disable watchdog, then lock the
+ WDT registers.
+ while WDT is designed to be disabled and locked by Policy,
+ bios should not enable WDT by WDT PPI. In such case, bios shows the
+ warning message but not disable and lock WDT register to make sure
+ WDT event trigger correctly.
+**/
+typedef struct {
+ CONFIG_BLOCK_HEADER Header; ///< Config Block Header
+ UINT32 DisableAndLock : 1; ///< <b>(Test)</b> Set 1 to clear WDT status, then disable and lock WDT registers. <b>0: Disable</b>; 1: Enable.
+ UINT32 RsvdBits : 31;
+} PCH_WDT_PREMEM_CONFIG;
+
+#pragma pack (pop)
+
+#endif // _WATCH_DOG_CONFIG_H_
--
2.36.1.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#108691): https://edk2.groups.io/g/devel/message/108691
Mute This Topic: https://groups.io/mt/101373949/7686176
Group Owner: devel+owner@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [rebecca@openfw.io]
-=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2023-09-15 5:43 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-15 4:45 [edk2-devel] [PATCH v2 01/10] AlderlakeSiliconPkg/IpBlock: Add CpuPcieRp, Espi, Gpio components Saloni Kasbekar
2023-09-15 4:45 ` [edk2-devel] [PATCH v2 02/10] AlderlakeSiliconPkg/IpBlock: Add Graphics, HostBridge, PcieRp components Saloni Kasbekar
2023-09-15 5:42 ` Chaganty, Rangasai V
2023-09-15 13:27 ` Chuang, Rosen
2023-09-15 23:56 ` Nate DeSimone
2023-09-15 4:45 ` [edk2-devel] [PATCH v2 03/10] AlderlakeSiliconPkg/IpBlock: Add P2sb, PchDmi components Saloni Kasbekar
2023-09-15 5:42 ` Chaganty, Rangasai V
2023-09-15 13:28 ` Chuang, Rosen
2023-09-15 23:56 ` Nate DeSimone
2023-09-15 4:45 ` [edk2-devel] [PATCH v2 04/10] AlderlakeSiliconPkg/IpBlock: Add Pmc, Spi components Saloni Kasbekar
2023-09-15 5:42 ` Chaganty, Rangasai V
2023-09-15 13:28 ` Chuang, Rosen
2023-09-15 23:56 ` Nate DeSimone
2023-09-15 4:45 ` [edk2-devel] [PATCH v2 05/10] AlderlakeSiliconPkg/Include: Add ConfigBlock headers Saloni Kasbekar
2023-09-15 5:42 ` Chaganty, Rangasai V [this message]
2023-09-15 13:28 ` Chuang, Rosen
2023-09-15 23:56 ` Nate DeSimone
2023-09-15 4:45 ` [edk2-devel] [PATCH v2 06/10] AlderlakeSiliconPkg/Include: Add Library, Pins, Ppi Includes Saloni Kasbekar
2023-09-15 5:43 ` Chaganty, Rangasai V
2023-09-15 13:28 ` Chuang, Rosen
2023-09-15 23:56 ` Nate DeSimone
2023-09-15 4:45 ` [edk2-devel] [PATCH v2 07/10] AlderlakeSiliconPkg/Include: Add Protocol, Register, Other Includes Saloni Kasbekar
2023-09-15 5:43 ` Chaganty, Rangasai V
2023-09-15 13:28 ` Chuang, Rosen
2023-09-15 23:56 ` Nate DeSimone
2023-09-15 4:45 ` [edk2-devel] [PATCH v2 08/10] AlderlakeSiliconPkg/Fru: Add AdlCpu Fru Saloni Kasbekar
2023-09-15 5:43 ` Chaganty, Rangasai V
2023-09-15 13:29 ` Chuang, Rosen
2023-09-15 23:56 ` Nate DeSimone
2023-09-15 4:45 ` [edk2-devel] [PATCH v2 09/10] AlderlakeSiliconPkg: Add AdlPch Fru and IncludePrivate modules Saloni Kasbekar
2023-09-15 5:43 ` Chaganty, Rangasai V
2023-09-15 13:29 ` Chuang, Rosen
2023-09-15 23:57 ` Nate DeSimone
2023-09-15 4:45 ` [edk2-devel] [PATCH v2 10/10] AlderlakeSiliconPkg: Add Alderlake Product and SiPkg.dec Saloni Kasbekar
2023-09-15 5:43 ` Chaganty, Rangasai V
2023-09-15 13:29 ` Chuang, Rosen
2023-09-15 23:57 ` Nate DeSimone
2023-09-15 5:42 ` [edk2-devel] [PATCH v2 01/10] AlderlakeSiliconPkg/IpBlock: Add CpuPcieRp, Espi, Gpio components Chaganty, Rangasai V
2023-09-15 13:27 ` Chuang, Rosen
2023-09-15 23:56 ` Nate DeSimone
2023-09-16 0:26 ` Nate DeSimone
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=MW4PR11MB57764A8CADF28109188FE794B6F6A@MW4PR11MB5776.namprd11.prod.outlook.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox